Tim6 Datasheet
Tim6 Datasheet
Tim6 Datasheet
Models
Order Code Input Voltage Output 1 Output 2 Efficiency
Range Vnom Imax Vnom Imax typ.
TIM 6-1211 5 VDC 1'200 mA 84 %
TIM 6-1212 12 VDC 500 mA 87 %
TIM 6-1213 9 - 18 VDC 15 VDC 400 mA 86 %
TIM 6-1221 (12 VDC nom.) +5 VDC 600 mA –5 VDC 600 mA 83 %
TIM 6-1222 +12 VDC 250 mA –12 VDC 250 mA 87 %
TIM 6-1223 +15 VDC 200 mA –15 VDC 200 mA 86 %
TIM 6-2411 5 VDC 1'200 mA 84 %
TIM 6-2412 12 VDC 500 mA 87 %
TIM 6-2413 18 - 36 VDC 15 VDC 400 mA 87 %
TIM 6-2421 (24 VDC nom.) +5 VDC 600 mA –5 VDC 600 mA 84 %
TIM 6-2422 +12 VDC 250 mA –12 VDC 250 mA 86 %
TIM 6-2423 +15 VDC 200 mA –15 VDC 200 mA 86 %
TIM 6-4811 5 VDC 1'200 mA 84 %
TIM 6-4812 12 VDC 500 mA 87 %
TIM 6-4813 36 - 75 VDC 15 VDC 400 mA 86 %
TIM 6-4821 (48 VDC nom.) +5 VDC 600 mA –5 VDC 600 mA 83 %
TIM 6-4822 +12 VDC 250 mA –12 VDC 250 mA 87 %
TIM 6-4823 +15 VDC 200 mA –15 VDC 200 mA 85 %
Options
on demand - Optional models with alternative pinning
(backorder with MOQ
non stocking item) - Optional models with alternative pinning and adjustable output voltage
Input Specifications
Input Current - At no load 48 Vin models: 4 mA typ.
12 Vin models: 10 mA typ. (5 Vout model)
10 mA typ. (12 Vout model)
10 mA typ. (15 Vout model)
15 mA typ. (5 / -5 Vout model)
10 mA typ. (12 / -12 Vout model)
14 mA typ. (15 / -15 Vout model)
24 Vin models: 6 mA typ. (5 Vout model)
6 mA typ. (12 Vout model)
6 mA typ. (15 Vout model)
8 mA typ. (5 / -5 Vout model)
6 mA typ. (12 / -12 Vout model)
8 mA typ. (15 / -15 Vout model)
Surge Voltage 12 Vin models: 25 VDC max. (3 s max.)
24 Vin models: 50 VDC max. (3 s max.)
48 Vin models: 100 VDC max. (3 s max.)
Under Voltage Lockout 12 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max.
24 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max.
48 Vin models: 31.5 VDC min. / 33 VDC typ. / 34.5 VDC max.
Recommended Input Fuse 12 Vin models: 1'250 mA (slow blow)
24 Vin models: 630 mA (slow blow)
48 Vin models: 315 mA (slow blow)
(The need of an external fuse has to be assessed
in the final application.)
Input Filter Internal Pi-Type
Output Specifications
Output Voltage Adjustment –10% to +20% (15 Vout single models)
±10% (other single and dual output models)
(Only for optional models with adjustable output)
(By external trim resistor)
See application note: www.tracopower.com/overview/tim6
Output power must not exceed rated power!
Voltage Set Accuracy ±1% max.
Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max.
dual output models: 0.5% max.
- Load Variation (0 - 100%) single output models: 0.2% max.
dual output models: 1% max. (Output 1)
1% max. (Output 2)
- Voltage Balance dual output models: 2% max.
(symmetrical load)
- Cross Regulation dual output models: 5% max.
(25% / 100% asym. load)
Ripple and Noise - single output 5 Vout models: 50 mVp-p typ. (w/ 10 μF)
(20 MHz Bandwidth) 12 Vout models: 75 mVp-p typ. (w/ 10 μF)
15 Vout models: 75 mVp-p typ. (w/ 10 μF)
- dual output 5 / -5 Vout models: 50 / 50 mVp-p typ. (w/ 10 μF)
12 / -12 Vout models: 75 / 75 mVp-p typ. (w/ 10 μF)
15 / -15 Vout models: 75 / 75 mVp-p typ. (w/ 10 μF)
Capacitive Load - single output 5 Vout models: 1'500 µF max.
12 Vout models: 260 µF max.
15 Vout models: 210 µF max.
- dual output 5 / -5 Vout models: 860 / 860 µF max.
12 / -12 Vout models: 150 / 150 µF max.
15 / -15 Vout models: 110 / 110 µF max.
Minimum Load Not required
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
Safety Specifications
Standards - IT / Multimedia Equipment EN 62368-1
IEC 62368-1
UL 62368-1
- Medical Equipment EN 60601-1
IEC 60601-1
ANSI/AAMI ES 60601-1
2 x MOPP (Means Of Patient Protection)
- Certification Documents www.tracopower.com/overview/tim6
Pollution Degree PD 2
Over Voltage Category OVC II
EMC Specifications
EMI Emissions EN 60601-1-2 edition 4 (Medical Devices)
- Conducted Emissions EN 55011 class A (internal filter)
EN 55011 class B (with external filter)
EN 55032 class A (internal filter)
EN 55032 class B (with external filter)
- Radiated Emissions EN 55011 class A (internal filter)
EN 55011 class B (with external filter)
EN 55032 class A (internal filter)
EN 55032 class B (with external filter)
External filter proposal: www.tracopower.com/overview/tim6
EMS Immunity EN 60601-1-2 edition 4 (Medical Devices)
EN 55035 (Multimedia)
- Electrostatic Discharge Air: EN 61000-4-2, ±15 kV, perf. criteria A
Contact: EN 61000-4-2, ±8 kV, perf. criteria A
- RF Electromagnetic Field EN 61000-4-3, 10 V/m, perf. criteria A
- EFT (Burst) / Surge EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±2 kV, perf. criteria A
Ext. input component: 3300µF, 25V, KZN || TVS 28V, 600W (12 Vin)
1200µF, 50V, KZN || TVS 58V, 600W (24 Vin)
390µF, 100V, KZN || TVS 120V, 600W (48 Vin)
- Conducted RF Disturbances EN 61000-4-6, 10 Vrms, perf. criteria A
- PF Magnetic Field Continuous: EN 61000-4-8, 100 A/m, perf. criteria A
1 s: EN 61000-4-8, 1000 A/m, perf. criteria A
General Specifications
Relative Humidity 95% max. (non condensing)
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
Supporting Documents
Overview Link (for additional Documents) www.tracopower.com/overview/tim6
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
Outline Dimensions
Standard model
22.86 (0.900)
Pinout
31.8 (1.25)
20.3 (0.80)
10.6 (0.42) Pin Single Dual
15.24 (0.600)
1 +Vin
11 No pin Common
24 1
12 out No pin
(0.37)
23
9.5
2.54 (0.100)
2.0 (0.08)
13 +Vout out
15 No pin +Vout
Restricted area.
8.0 8.0 23
No copper traces in
(0.32) or components allowed. (0.32)
24 in
Ø0.60 (Ø0.024)
15
(0.37)
11
9.5
13 12
3.8 (0.15)
BOTTOM VIEW
Dimensions in mm (inch)
Tolerances: x.x ±0.5 (x.xx ±0.02)
x.xx ±0.25 (x.xxx ±0.010)
Pin diameter tolerance: ±0.10 (±0.004)
Alternative pinning
17.78 (0.700)
Pinout
31.8 (1.25)
20.3 (0.80)
10.6 (0.42) (without Trim option)
15.24 (0.600)
Pin Single Dual
2 in
10 No pin
(0.37)
23 2
9.5
22 11 NC out
2.54 (0.100)
4.5 (0.18)
14 +Vout
Restricted area.
8.0 No copper traces
8.0 16 out Common
(0.32) or components allowed. (0.32)
22 +Vin
23 +Vin
16 10
(0.37)
9.5
11
NC: Not connected
14
Ø0.60 (Ø0.024)
(with Trim option)
3.8 (0.15)
BOTTOM VIEW Pin Single Dual
Dimensions in mm (inch) 2 in
Tolerances: x.x ±0.5 (x.xx ±0.02) 10 Trim
x.xx ±0.25 (x.xxx ±0.010)
Pin diameter tolerance: ±0.10 (±0.004) 11 No pin out
14 +Vout
16 out Common
22 +Vin
23 +Vin