CAT.

0112-GB

Agricultural Series to ISO 7241-A Standards

UNI EN ISO 9001

Cert. n° 2905
ISO/TS 16949
 ▲

QUICK-RELEASE COUPLINGS FOR AGRICULTURE

▲

▲
Features Applications Benefits Recommendations

• Interchangeable according to • Quick release couplings purposely NV series, NS series • Improper use and incorrect
international standards specific designed for agricultural • Connection-disconnection by maintenance of products with
for the agriculture field applications pulling back the sleeve high internal working pressures
• Internal components purposely • Several versions are approved • Poppet valve (NV series) or ball could cause malfunctioning
designed to reduce turbolences and used by the most important valve (NS series) shut-off system and damage to persons
and consequent pressure drop manufacturers of tractors and • 1/2” size according to ISO 7241-1 and machines.
• Rolled surfaces in sealing area attachments in the world part A standard Therefore it is necessary to
to ensure the lowest roughness • Conformity to ISO 7241-1 part A carefully conform to the simple
• Great number of latching balls standards ensures the PV series instructions contained in this
• Hardened valve bodies to stand interchangeability all over • Interchangeable according to catalogue.
crashes the world ISO 7241-1 part A standard For any further information please
• Contenitive washer with special • VF... series couplings comply with • Push-Pull connection system contact FASTER® Technical
seal to reduce the risk of extrusion ISO 5676 standard and are • Panel mounting by the sleeve Department.
• Guidevalve with mechanical designed to connect hydraulic • Suitable for flexible hoses • Before using a new quick-release
backstop to achieve a perfect brakes systems • Breakaway feature to prevent hose coupling, please carefully check
interchangeability between ball • Quick release couplings described breaking in case of accidental all data reported in our
and poppet valved couplings within this catalogue are suitable disconnection of the attachment catalogues.
• Parts subject to loads and wear for all the applications which • Make sure that the coupling
are hardened by heat treatment satisfy technical requirements 3... series is suitable for pressure and flow
• Carbonitrided sleeve on female of the products • Interchangeable according to characteristics requested by
couplings ISO 7241-1 part A standard the applications.
• Balls racing area on the male • Push-Pull connection system • Lubricate the seals and perform
coupling induction hardened • Connectable with male coupling a connect and disconnect
• NBR seals under pressure operation in order to check the
• PTFE back-up ring • Disconnection under pressure perfect functioning of the coupling.
• Metal shoulder to protect the in case of emergency • Verify that threads fit and that
O-ring seal on female coupling • Internal mechanical block patented their sealing is correct.
• Wide range of threads to prevent valves enclosures due • If necessary replace damaged
and connectors to flow inversions and peaks components with FASTER®
• Accessories and spare parts kit • Suitable for flexible hoses original spare parts.
available with detailed assembling (3CPV series), for rigid tubes or to • Before any connection
instructions be assembled on the distributor and disconnection carefully
(3CFPV series) clean both male and female
• Breakaway feature parts to prevent dirt inclusions
into the circuit and consequent
4... series seals damage.
• With the same features as 3... When couplings are disconnected,
series but connectable with both please protect them with original
male and female couplings under FASTER® plugs.
pressure in the same time
• Disconnectable under pressure
• Suitable for rigid tubes or to be
assembled on the distributor
• Frontal relief microvalve with
Polyurethane seals

VF... series
• Quick release couplings for
hydraulic brakes systems
interchangeable according
to ISO 5676 standard
• Flat valve shut-off system
to reduce oil spillage
• Additional safety sleeve to prevent
accidental disconnection
(VFS series)
• Internal safety slider patented to
prevent disconnection when safety
conditions (locked trailer) are
not occuring (VFB series)

2
▲

▲
Attention! Guarantee Responsibilities OEM’s Users

• When a disconnection is • All FASTER® quick-release • The recommendations stated

performed on an agricultural couplings are designed and in this catalogue do not
machine, there could be a produced in conformity with consider all risk factors in every
residual pressure that depending the regulations of Quality possible application of FASTER®
on temperature and position, Managing System according couplings.
could reach high values. to UNI EN ISO 9001 and • The final choice of the product
This prevents opening the valve UNI ISO/TS 16949 Standards. is under customer’s responsibility
in the male part and • They bear the FASTER® logo who has to make the selection
as a consequence, to guarantee their origin according to FASTER®
the connection is not possible. and reliability. suggestions.
• Avoid forcing the coupling • FASTER® quick-release couplings • The customer has to make sure
valve to decrease residual are distribuited worldwide through that all requirements of chosen
pressure. a network of highly qualified parts are respected, efficiency
• Use female part suitable distributors. is maintained and the end user
for connection under pressure. • If a FASTER® quick-release is informed about use and
• Do not use any sharpened tools coupling is connected to a maintenance operations.
which could damage the seals correspondent competitor’s type • FASTER® and its Distributors GOLDONI
when opening the valves. please check the functionality, are not responsible for damages
the sealing and the resistance to persons and machines
to working pressure before caused by an improper use
using the coupling. and an incorrect maintenance
• Faster can not assure the of products.
performance, quality and • Increase of products’ technical
connecting tolerances and functional features is
of competitor’s types. FASTER®’s policy.
• Malfunctioning or leakages due to For that reason all data in
the above mentioned cases could this catalogue are not binding.
cause serious damages FASTER® is entitled to modify the
to persons and machines. specifications without prior notice.
▲

How to order

See available item codes in the

ordering chart.

As a further help in defining and

selecting the most suitable product
for specific application please ask
and fill-in with as much information
as possible the Product Definition
Form (mod. A003) sending it back
to Faster Customer Service.

STEYR

UNI EN ISO 9001

Cert. n° 2905
ISO/TS 16949

3
 Agricultural series according
to ISO 7241-A Standards

4
 Internal PTFE
mechanical ▼

▼
▼
▼
▼
back up
block ▼
▼ ring
patented
Anti-dust ▼ ▼
protection ▼ ▼ In the picture
▼ ▼ Series
▼ ▼

▼
▼
▼
▼
▼
▼
▼
▼
Special profile
seal to reduce
the risk
NV12
▼
▼
▼
▼
▼
▼
of extrusion
GAS M
▼ ▼ ▼
▼ ▼ ▼ ▼
▼ ▼ ▼ ▼
▼ ▼ ▼
▼
▼
▼
▼
▼
▼
▼

▼ Metal
▼ shoulder ▼
In the picture
▼
▼
▼

Series

3CFPV
Patent
Application
Pending
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼

▼
▼
▼
▼

▼
▼ ▼
▼

▼ ▼
▼ ▼ ▼ ▼
▼ ▼
▼
▼ ▼
▼ ▼
Great
number Hardened
of latching valve
Carbonitrited
Interchangeable balls bodies Balls
sleeve
according to racing area
ISO 7241-1 A induction
standard hardened
▲

THE NEW REVOLUTIONARY WAY OF THE QUICK-RELEASE COUPLING

• Allows the connection with the male part under pressure (3 series).
• Push-Pull connection.
• The disconnection is achieved by pulling back the male part (BREAKAWAY feature).
• Direct application on the valve or to rigid tubes.
• Mechanical block of valves is automatic and prevents return line shut down even at high flow rate.
• Dimensionally compact.
• Wide range of threads.

The descriptions and illustrations in this catalogue are for information only and are not binding.
5
 Series
NV - NS
▲

Features
• Connection system: pulling back the sleeve
• Disconnection system: pulling back the sleeve
• Shut off system: poppet valve (NV series) or ball valve (NS series)
• Connectability: without pressure
• Disconnection under pressure: not allowed
• Interchangeability: according to ISO 7241-1 part A (only 1/2” size)

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Special guidevalve with flow deflector (2NV series)
• Perfect interchangeability between poppet and ball valve couplings.

NV NS

Minimum burst pressure

▲

Technical data Size DN

Nominal Rated
Force to Max. work. Fluid Female NV Male 2NV Male
Type diameter Flow
connect pressure Connected Male Female spillage
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
NV 10,5 0.41 75 19.8 90 19,8 30 4350 130 18850 120 17400 130 18850 1.8
08
NS 8,5 0.33 50 13.2 90 19,8 20 2900 120 17400 85 12325 80 11600 1.5

* Safety factor = 1:4 – for static pressure safety factor = 1:2

▲

Available items

B C ØD L CHF CHM SM OEM’s

Type
Threaded
end ❖ Female Male ØA Standards users
mm inc mm inc mm inc mm inc mm inc mm inc mm 2 inc 2
NV 12 GAS F NV 12 GAS M 1/2” BSP DIN 3852-2-X 66 2,60 44 1,73 38 1,50 88 3,46 27 1,06 27 1,06 86 0,13 C-F-I-P-Q-T-U
2 NV 12 GAS M 1/2” BSP DIN 3852-2-X 47 1,85 27 1,06 86 0,13 E
NV 12 NPT F NV 12 NPT M 1/2” NPTF ANSI B 1.20.3 66 2,60 44 1,73 38 1,50 88 3,46 27 1,06 27 1,06 86 0,13 A-N
A 08 2 NV 12 NPT M 1/2” NPTF ANSI B 1.20.3 47 1,85 27 1,06 86 0,13 E-N
Valve occlusion NV 2215 F NV 2215 M M22x1,5 DIN 3852-1-X 66 2,60 44 1,73 38 1,50 88 3,46 27 1,06 27 1,06 86 0,13
A type
NV 12-12SAE F NV 12-12SAE M 3/4” UNF SAE J1926-1 66 2,60 44 1,73 38 1,50 88 3,46 27 1,06 27 1,06 86 0,13 H
2 NV 12-12SAE M 3/4” UNF SAE J1926-1 47 1,85 27 1,06 86 0,13
B 08 NV 12-58SAE F NV 12-58SAE M 7/8” UNF SAE J1926-1 69,5 2,74 51 2,01 38 1,50 98,5 3,88 32 1,26 27 1,06 86 0,13 N
*2 NV 12-58SAE M 7/8” UNF SAE J1926-1 54 2,13 27 1,06 86 0,13

Ball occlusion NS 12GAS F NS 12GAS M 1/2” BSP DIN 3852-2-X 68 2,68 46 1,81 38 1,50 92 3,62 27 1,06 27 1,06 57 0,09
type A 08 NS 12NPT F NS 12NPT M 1/2” NPTF ANSI B 1.20.3 68 2,68 46 1,81 38 1,50 92 3,62 27 1,06 27 1,06 57 0,09 H
B

❖ Size SM = Min. useful section GAS = BSP * On request

Pressure drop graph:

test bench to ISO 7241-2 specifications with ISO VG 32 oil Caption
at 40°C (104°F) temperature. OEM’s Users
Materials:
- Female in steel with wear parts carbonitrited. A Agritalia
- Male in high grade carbon steel, induction hardened. B Claas
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation. C Deutz Fahr
- Springs in C98 steel. D Agco Fendt
- High resistance balls 100 C6.
E Goldoni
Seals:
Standard in oilproof NBR (Nitrile Rubber). F Hürlimann
On request: Viton, Neoprene, EPDM or other seals. G Case
Antiextrusion rings:
In pure PTFE. H John Deere
Working temperatures: I Lamborghini
with standard seals in NBR (Nitrile Rubber)
from -25°C (-13°F) to +125°C (+257°F). L Landini
For temperature exceeding these values, the quick-release coupling M Massey Ferguson
will be supplied with all components in steel together
N New Holland Italia
with the appropriate seals.
O Renault
P Same
Q Valtra
R Steyr

The descriptions and illustrations in this catalogue S JCB

are for information only and are not binding.
T Antonio Carraro
6
U BCS
 Series
PV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: without pressure
• Disconnection under pressure: not allowed
• Interchangeability: according to ISO 7241-1 part A standard

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for flexible hoses
• Panel mounting by the sleeve
• Breakaway feature (if panel mounted)
▲

Technical data
Female Male

Size DN Minimum burst pressure

Nominal Rated Max. work.
Force to Fluid
Type diameter Flow connect
pressure Connected Male Female spillage
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
PV 08 10,5 0.41 75 19.8 160 35,2 26 3770 148 21460 105 15950 110 15950 1.8

* Safety factor = 1:4 – for static pressure safety factor = 1:2

For a wide range of threads

see Cat. 0116 CPV-CNV and
CVV series.
▲

Availble items

B C ØD L CHF CHM SM
❖ Female Male ØA Standards
OEM’s
users
mm inc mm inc mm inc mm inc mm inc mm inc mm 2 inc 2
PV 12 GAS F NV 12 GAS M 1/2” BSP DIN 3852-2-X 66 2.60 44 1.73 38 1.50 88 3.46 27 1.06 27 1.06 86 0.13 A-C-F-I-P-Q-U
PV 12 NPT F NV 12 NPT M 1/2” NPTF ANSI B 1.20.3 66 2.60 44 1.73 38 1.50 88 3.46 27 1.06 27 1.06 86 0.13 N-Q

08

❖ Size SM = Min. useful section GAS = BSP * On request

Caption
Pressure drop graph: OEM’s Users
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F) temperature. A Agritalia
Materials:
- Female in steel with wear parts carbonitrited. B Claas
- Male in high grade carbon steel, induction hardened. C Deutz Fahr
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation. D Agco Fendt
- Springs in C98 steel. E Goldoni
- High resistance balls 100 C6.
F Hürlimann
Seals:
Standard in oilproof NBR (Nitrile Rubber). G Case
On request: Viton, Neoprene, EPDM or other seals. H John Deere
Antiextrusion rings:
In pure PTFE. I Lamborghini
Working temperatures: L Landini
with standard seals in NBR (Nitrile Rubber)
M Massey Ferguson
from -25 °C (-13°F) to +125°C (+257°F).
For temperature exceeding these values, the quick-release N New Holland Italia
coupling will be supplied with all components in steel together O Renault
with the appropriate seals.
P Same
Q Valtra
R Steyr
S JCB

The descriptions and illustrations in this catalogue T Antonio Carraro

are for information only and are not binding.
U BCS
7
 Series
3CPV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: only male coupling under pressure
• Disconnection under pressure: just in case of emergency
• Interchangeability: according to ISO 7241-1 part A standard

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for flexible hoses
• Panel mounting by the sleeve
• Breakaway feature (if panel mounted)
• Internal patented mechanical block

Patent
Application
Pending
▲

Technical data

DN Minimum burst pressure

Rated Force Max. working Fluid
Size Nominal Flow to connect pressure spillage
diameter Connected Male Female
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
08 10,5 0.41 70 18.5 185 40 25 3625 100 14500 105 15250 100 14500 1.8

* Safety factor = 1:4 – for static pressure safety factor = 1:2

Pressure drop graph:

test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F) temperature.
Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Antiextrusion rings:
In pure PTFE.
Working temperatures:
with standard seals in NBR (Nitrile Rubber)
from -25°C (-13°F) to +125°C (+257°F).
For temperature exceeding these values, the quick-release coupling
will be supplied with all components in steel together
with the appropriate seals.
The descriptions and illustrations in this catalogue are for information only and are not binding.
8
▲
Available items
Female Male

Series
3CPV
B C ØD L CHF CHM ØT
OEM’s
❖ Female Male ØA Standards users
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc.

3CPV 12GAS F 1/2” BSP DIN 3852-2-X 89,3 3,52 44 1,73 38 1,50 111,3 4,38 27 1,06 27 1,06 C-F-I-P
3CPV 12NPT F 1/2” NPTF ANSI B 1.20.3 89,3 3,52 44 1,73 38 1,50 111,3 4,38 27 1,06 27 1,06 N
08

3CPV 34UNF F 3/4” UNF SAE J 1926-1 89,3 3,52 44 1,73 38 1,50 111,3 4,38 27 1,06 27 1,06 L-N
3CPV 34UNF F MF 3/4” UNF SAE J 1926-1 89,3 3,52 44 1,73 39,7 1,56 111,3 4,38 27 1,06 27 1,06
Male coupling according to ISO 7241-1 part A (see page 6)

08 3CPV 78UNF F 7/8” UNF SAE J 1926-1 91,3 3,59 44 1,73 38 1,50 111,3 4,38 27 1,06 27 1,06
3CPV 0/2215 F M22x1,5 ISO 6149-1 89,3 3,52 44 1,73 38 1,50 111,3 4,38 27 1,06 27 1,06
3CPV 0/2215 F M22x1,5 ISO 6149-1 89,3 3,52 44 1,73 39,7 1,56 111,3 4,38 27 1,06 27 1,06 H
3CPV 1/12GAS F 1/2” BSP DIN 3852-2-B 85,4 3,36 44 1,73 38 1,50 107,4 4,23 27 1,06 27 1,06
3CPV 1/34UNF F 3/4” UNF SAE J 1926-3 85,4 3,36 44 1,73 38 1,50 107,4 4,23 27 1,06 27 1,06
08

3CPV 2/1815 F M18x1,5 ISO 6149-2 85,3 3,36 44 1,73 38 1,50 107,3 4,22 27 1,06 27 1,06 12,2 0,48
3CPV 2/2215 F M22x1,5 ISO 6149-2 86,3 3,40 44 1,73 38 1,50 108,3 4,26 27 1,06 27 1,06 15,2 0,60
08

3CPV 7/2215 F M22x1,5 ISO 8434-1-L 100,3 3,95 44 1,73 38 1,50 122,3 4,81 27 1,06 27 1,06 15,2 0,60

08

3CPV 11/08SAE F 13/16” UN ISO 8434-3 87,1 3,43 44 1,73 38 1,50 109,1 4,30 27 1,06 27 1,06

08

3CPV 13/58SAE F 7/8” UNF ISO 8434-2 93,6 3,69 44 1,73 38 1,50 115,6 4,55 27 1,06 27 1,06

08

3CPV 16/12GAS F 1/2” BSP DIN 3863 88,3 3,48 44 1,73 38 1,50 110,3 4,34 27 1,06 27 1,06

08

❖ Size GAS = BSP *On request

Caption OEM’s Users
A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr
B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same
C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra

The descriptions and illustrations in this catalogue are for information only and are not binding.
9
 Series
3CFPV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: only male coupling under pressure
• Disconnection under pressure: in case of emergency only
• Interchangeability: according to ISO 7241-1 part A standard

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for rigid tubes or distributors
• Breakaway feature
• Internal mechanical block patented

Patent
Application
Pending
▲

Technical data
FORCE (N)

DN Minimum burst pressure

Rated Force Max. work. Fluid
Nominal Flow to connect pressure spillage
Size diameter Connected Male Female
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
08 10,5 0.41 68 18 220 48 25 3625 105 15250 105 15250 100 14500 1.8

* Safety factor = 1:4 – for static pressure safety factor = 1:2

PRESSURE (MPa)

Disconnection force results from internal pressure.

(Breakaway feature)

Pressure drop graph:

test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°C) temperature.
Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Antiextrusion rings:
In pure PTFE.
Working temperatures:
with standard seals in NBR (Nitrile Rubber) from -25°C (-13°F)
to +125°C (+257°F).
For temperature exceeding these values, the quick-release coupling
will be supplied with all components in steel together
with the appropriate seals.
The descriptions and illustrations in this catalogue are for information only and are not binding.
10
▲
Available items
Female Male

Series
3CFPV
B C ØD L CHF CHM ØT
OEM’s
❖ Female Male ØA Standards users
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc.

3CFPV 12GAS F 1/2” BSP DIN 3852-2-X 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06 C-F-I-P
3CFPV 12NPT F 1/2” NPTF ANSI B 1.20.3 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06 N
08

3CFPV 34UNF F 3/4” UNF SAE J 1926-1 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06 L
3CFPV 78UNF F 7/8” UNF SAE J 1926-1 109,3 4,30 44 1,73 38 1,50 131,3 5,17 30 1,18 27 1,06
08

3CFPV 1/34UNF F 3/4” UNF SAE J 1926-3 107,5 4,23 44 1,73 38 1,50 129,5 5,10 32 1,26 27 1,06 Q
3CFPV 1/78UNF F 7/8” UNF SAE J 1926-3 113,7 4,48 44 1,73 38 1,50 135,7 5,34 32 1,26 27 1,06 G
08 *3CFPV 1/34S F 1 1/16” UN SAE J 1926-3 110,8 4,36 44 1,73 38 1,50 132,8 5,23 32 1,26 27 1,06
3CFPV 1/1815 F M18x1,5 ISO 6149-2 113,3 4,46 44 1,73 38 1,50 135,3 5,33 32 1,26 27 1,06 N
Male coupling according to ISO 7241-1 part A (see page 6)

3CFPV 1/2215 F M22x1,5 ISO 6149-2 110,8 4,36 44 1,73 38 1,50 132,8 5,23 32 1,26 27 1,06 A-G-H-L-M-N-O
3CFPV 08 2/2215 F M22X1,5 ISO 8434-1-L 118 4,65 44 1,73 38 1,50 140,0 5,51 32 1,26 27 1,06 15,2 0,60
3CFPV 08 2/302 F M30X2 ISO 8434-1-L 118 4,65 44 1,73 38 1,50 140,0 5,51 32 1,26 27 1,06 22,2 0,87
08

*3CFPV 3/2015 F M20x1,5 ISO 8434-1 S 107,8 4,24 44 1,73 38 1,50 129,8 5,11 32 1,26 27 1,06 12,2 0,48

08

3CFPV 7/1815 F M18x1,5 ISO 8434-1-L 121,5 4,78 44 1,73 38 1,50 143,5 5,65 32 1,26 27 1,06 12,2 0,48 A
3CFPV 7/2215 F M22x1,5 ISO 8434-1-L 123,5 4,86 44 1,73 38 1,50 145,5 5,73 32 1,26 27 1,06 15,2 0,60 C
08

3CFPV 8/2415 F M24x1,5 ISO 8434-1-S 121,5 4,78 44 1,73 38 1,50 143,5 5,65 32 1,26 27 1,06 16,2 0,64 A

08

3CFPV 11/12SF J 13/16” UN ISO 8434-3 108,6 4,28 44 1,73 38 1,50 130,6 5,14 32 1,26 27 1,06

08

3CFPV 12/1UNS F 1” UNS ISO 8434-3 130,3 5,13 44 1,73 38 1,50 152,3 6,00 32 1,26 27 1,06 G
3CFPV 08 12/34S F 1 3/16” UN ISO 8434-3 136,8 5,39 44 1,73 38 1,50 158,8 6,25 32 1,26 34 1,34
08

*3CFPV 13/12S F 3/4” UNF ISO 8434-2 111,1 4,37 44 1,73 38 1,50 133,1 5,24 32 1,26 27 1,06
*3CFPV 13/58S F 7/8” UNF ISO 8434-2 115,1 4,53 44 1,73 38 1,50 137,1 5,40 32 1,26 27 1,06
08

3CFPV 14/34UNF F 3/4” UNF ISO 8434-2 124,8 4,91 44 1,73 38 1,50 146,8 5,78 32 1,26 27 1,06 O
08 3CFPV 14/78UNF F 7/8” UNF ISO 8434-2 128,8 5,07 44 1,73 38 1,50 150,8 5,94 32 1,26 27 1,06 Q

3CFPV 19/2215 F M22x1,5 DIN 7643 134,8 5,31 44 1,73 38 1,50 156,8 6,17 32 1,26 27 1,06 C-F-I-P-R
08

3CFPV 21/2215 F M22x1,5 DIN 3852-11 110,3 4,34 44 1,73 38 1,50 132,3 5,21 32 1,26 27 1,06 C-F-I-P-G-R
08

3CFPV 22/2215 F M22x1,5 DIN 3852-1-A 110,3 4,34 44 1,73 38 1,50 132,3 5,21 32 1,26 27 1,06 R
08

❖ Size GAS = BSP *On request Caption OEM’s Users

A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr U - BCS
B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same S - JCB
The descriptions and illustrations in this catalogue C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra T - Antonio Carraro
are for information only and are not binding.
11
 Series
4SFPV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: both male and female couplings under pressure
(two steps connection)
• Disconnection under pressure: in case of emergency only
• Interchangeability: according to ISO 7241-1 part A standard

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for rigid tubes and distributors
• Breakaway feature
• Internal mechanical block patented
• Frontal relief microvalve

Patent
Application
Pending
▲

Technical data

DN Minimum burst pressure

Rated Force Max. work. Fluid
Nominal Flow to connect pressure spillage Fluid volume in the plant connected
Size diameter Connected Male Female
* to the female half (1500cc).
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI
See graph
08 10,5 0.41 68 17,9 220 48 25 3625 105 15250 105 15250 100 14500

* Safety factor = 1:4 – for static pressure safety factor = 1:2

SPILLAGE (cc)

PRESSURE (MPa)

Fluid spillage during connection and disconnection phase.

Pressure drop graph:

test bench to ISO 7241-2 specifications with ISO VG 32 oil
FORCE (N)

at 40°C (104°F) temperature.

Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Decompression valve seal in Polyurethane.
Antiextrusion rings:
In pure PTFE.
Working temperatures: PRESSURE (MPa)
with standard seals in NBR (Nitrile Rubber)
from -25°C (-13°F) to +125°C (+257°F).
For temperature exceeding these values, the quick-release coupling
will be supplied with all components in steel together with the Disconnection force results from internal pressure.
(Breakaway feature)
appropriate seals.
The descriptions and illustrations in this catalogue are for information only and are not binding.
12
▲
Available items
Female Male

Series
4SFPV
B C ØD L CHF CHM ØT
OEM’s
❖ Female Male ØA Standards users
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc.

4SFPV 12GAS F 1/2” BSP DIN 3852-2-X 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06 C-F-I-P
4SFPV 12NPT F 1/2” NPTF ANSI B 1.20.3 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06 N
08

*4SFPV 34UNF F 3/4” UNF SAE J 1926-1 107,3 4,22 44 1,73 38 1,50 129,3 5,09 27 1,06 27 1,06
4SFPV 78UNF F 7/8” UNF SAE J 1926-1 109,3 4,30 44 1,73 38 1,50 131,3 5,17 30 1,18 27 1,06
08
4SFPV 1116 UN F 1 1/16” UN SAE J 1926-1 109,3 4,30 44 1,73 38 1,50 131,3 5,17 32 1,26 27 1,06

4SFPV 1/12GAS F 1/2” BSP DIN 3852 110,8 4,36 44 1,73 38 1,50 132,8 5,23 32 1,26 27 1,06
4SFPV 1/34UNF F 3/4” UNF SAE J 1926-3 107,5 4,23 44 1,73 38 1,50 129,5 5,10 32 1,26 27 1,06
4SFPV 1/78UNF F 7/8” UNF SAE J 1926-3 113,7 4,48 44 1,73 38 1,50 135,7 5,34 32 1,26 27 1,06 G
Male coupling according to ISO 7241-1 part A (see page 6)

08
4SFPV 1/1116 UN F 1 1/16” UN SAE J 1926-3 110,8 4,36 44 1,73 38 1,50 132,8 5,23 32 1,26 27 1,06
*4SFPV 1/1815 F M18x1,5 ISO 6149-2 113,3 4,46 44 1,73 38 1,50 135,3 5,33 32 1,26 27 1,06
4SFPV 1/2215 F M22x1,5 ISO 6149-2 110,8 4,36 44 1,73 38 1,50 132,8 5,23 32 1,26 27 1,06 R-N
4SFPV 3/2015 F M20x1,5 ISO 6149-2 107,8 4,24 44 1,73 38 1,50 129,8 5,11 32 1,26 27 1,06 12,2 0,48

08

4SFPV 4/38GAS F 3/8” BSP DIN 3863 130,8 5,15 44 1,73 38 1,50 152,8 6,02 32 1,26 27 1,06
4SFPV 4/12GAS F 1/2” BSP DIN 3863 130,8 5,15 44 1,73 38 1,50 152,8 6,02 32 1,26 27 1,06 S
08

*4SFPV 7/1815 F M18x1,5 ISO 8434-1-L 121,5 4,78 44 1,73 38 1,50 143,5 5,65 32 1,26 27 1,06 12,2 0,48
4SFPV 7/2215 F M22x1,5 ISO 8434-1-L 123,5 4,86 44 1,73 38 1,50 145,5 5,73 32 1,26 27 1,06 15,2 0,60
08

*4SFPV 8/2415 F M24x1,5 ISO 8434-1-S 121,5 4,78 44 1,73 38 1,50 143,5 5,65 32 1,26 27 1,06 16,2 0,64

08

4SFPV 12/1UNS F 1” UNS ISO 8434-3 130,3 5,13 44 1,73 38 1,50 152,3 6,00 32 1,26 27 1,06
4SFPV 0812/34S F 1 3/16” UN ISO 8434-3 138,6 5,46 44 1,73 38 1,50 160,6 6,32 32 1,26 27 1,06
08

*4SFPV 14/34UNF F 3/4” UNF ISO 8434-2 124,8 4,91 44 1,73 38 1,50 146,8 5,78 32 1,26 27 1,06
4SFPV 14/78UNF F 7/8” UNF ISO 8434-2 128,8 5,07 44 1,73 38 1,50 150,8 5,94 32 1,26 27 1,06
08

4SFPV 19/2215 F M22x1,5 DIN 7643 134,8 5,31 44 1,73 38 1,50 156,8 6,17 32 1,26 27 1,06

08

4SFPV 21/2215 F M22x1,5 DIN 3852-11 110,3 4,34 44 1,73 38 1,50 132,3 5,21 32 1,26 27 1,06

08

4SFPV 22/2215 F M22x1,5 DIN 3852-1-A 110,3 4,34 44 1,73 38 1,50 132,3 5,21 32 1,26 27 1,06
4SFPV 22/2215 F 3/8” BSP DIN 3852-2-A 110,3 4,34 44 1,73 38 1,50 134,1 5,28 34 1,34 27 1,06
08

❖ Size GAS = BSP *On request

Caption OEM’s Users

A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr U - BCS
B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same S - JCB
The descriptions and illustrations in this catalogue C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra T - Antonio Carraro
are for information only and are not binding.
13
 Series
4SEPV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: both male and female couplings under pressure
(one step connection)
• Disconnection under pressure: in case of emergency only
• Interchangeability: according to ISO 7241-1 part A standard

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for rigid tubes and distributors
• Breakaway feature
• Internal mechanical block patented
• Frontal relief microvalve
• Internal additional relief microvalve
Patent
Application
▲

Technical data Pending

DN Minimum burst pressure

Rated Force Max. work. Fluid
Nominal Flow to connect pressure spillage
Size diameter Connected Male Female Female Male
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI
See graph
08 10,5 0.41 75 19,8 250 55 25 3625 110 15250 105 15250 110 15950

* Safety factor = 1:4 – for static pressure safety factor = 1:2

▲

Available items

B C ØD L CHF CHM ØT OEM’s

❖ Female Male ØA Standards
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. Users

4SEPV 1/2215 F according to ISO 7241-1 A M22x1,5 ISO 6149-2 112,6 4,43 44 1,73 45 1,77 132,8 5,23 32 1,26 27 1,06 N

❖ Size GAS = BSP

*On request
Fluid volume in the plant connected
to the female half (150cc).
FORCE (N)
SPILLAGE (cc)

PRESSURE (MPa) PRESSURE (MPa)

Fluid spillage during connection and disconnection phase. Disconnection force results from internal pressure.
(Breakaway feature)
Pressure drop graph:
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F) temperature.
Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber). Caption OEM’s Users
On request: Viton, Neoprene, EPDM or other seals.
A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr U - BCS
Decompression valve seal in Polyurethane.
Antiextrusion rings: B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same S - JCB
In pure PTFE. C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra T - Antonio Carraro
Working temperatures:
with standard seals in NBR (Nitrile Rubber)
from -25°C (-13°F) to +125°C (+257°F). For temperature exceeding
these values, the quick-release coupling will be supplied with all
components in steel together with the appropriate seals.
The descriptions and illustrations in this catalogue are for information only and are not binding.
14
 Series
4DFPV
▲

Features
• Connection system: pushing the male coupling
• Disconnection system: pulling the male coupling
• Shut-off system: poppet valve
• Connectability: both male and female couplings under pressure
(one step connection)
• Disconnection under pressure: in two steps
• Interchangeability: according to ISO 7241-1 part A

• Balls-bearing latching system

• Guidevalve with mechanical backstop
• Suitable for rigid tubes or distributors
• Breakaway feature
• Internal mechanical block patented
• Backward internal microvalve for clean oil drainage Patent
Application
Pending
▲

Technical data

DN Minimum burst pressure

Rated Max. working Fluid
Nominal Flow pressure spillage
Size diameter Connected Male Female
* Female Male
mm inc l/min. GPM MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
08 10,5 0.41 75 19,8 25 3625 110 15950 105 15250 110 15950 1,8 cc

* Safety factor = 1:4 – for static pressure safety factor = 1:2

▲

Available items

B C ØD L CHF CHM ØT OEM’s

❖ Female Male ØA Standards
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. Users

4DFPV 1/2215 F according to ISO 7241-1 A M22x1,5 ISO 6149-2 130,5 5,14 44 1,73 46 1,81 152,5 6,00 42 1,65 27 1,06 H

❖ Size GAS = BSP

*On request FORCE (N)
FORCE (N)

FORCE (N)

PRESSURE (MPa) PRESSURE (MPa) PRESSURE (MPa)

Connection force according Disconnection force according Disconnection force results from internal pressure.
to the internal pressure to the internal pressure (Breakaway feature)
Pressure drop graph:
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F) temperature.
Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel hardened valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber). Caption OEM’s Users
On request: Viton, Neoprene, EPDM or other seals.
A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr U - BCS
Antiextrusion rings:
In pure PTFE. B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same S - JCB
Working temperatures: C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra T - Antonio Carraro
with standard seals in NBR (Nitrile Rubber)
from -25°C (-13°F) to +125°C (+257°F).
For temperature exceeding these values, the quick-release
coupling will be supplied with all components in steel together
with the appropriate seals.
The descriptions and illustrations in this catalogue are for information only and are not binding.
15
 Series
CFPV
▲

Special couplings
▲

Quick release couplings CFPV series

• Connection system: pushing the male coupling

• Disconnection system: pulling the male coupling NEW
• Shut off system: poppet valve
• Connectability: without pressure
• Disconnection under pressure: for emergency operation only
• Interchangeability: according to ISO 7241-1 part A standard

• Balls bearing latching system

• Guidevalve with mechanical backstop
• Suitable for rigid tubes or distributors
• Breakaway feature
• 3/8” and 3/4” size

Series
4BM
▲

Manifolds to link the couplings to the valve

• Cast iron manifolds

• Equipped with 2 Push-Pull couplings female part
• Provided of internal lines purposely designed to minimize
pressure drops
• To be assembled on the valve by fixing screws
• Yellow zinc plating surface protection
NEW

Cartridge coupling to be integrated

▲

Series
4DCPV
in suitable valves

• Connection system: pushing the male coupling

• Disconnection system: pulling the male coupling
or by distributor lever
• Shut-off system: poppet valve
• Connectability: both male and female couplings under pressure
(one step connection)
• Disconnection under pressure: in two steps
• Interchangeability: according to ISO 7241-1 part A standard
NEW
• Balls-bearing latching system
• Guidevalve with mechanical backstop
• Cartridge design
• To be completely integrated in the distributor
• Breakaway feature
• Internal mechanical block patented
• Backward internal microvalve for clean oil drainage

The descriptions and illustrations in this catalogue are for information only and are not binding.
16
 Accessories
▲

Pusher
Series
This accessory can be applied to the PUSH-PULL
coupling sleeve for an easier connection
and disconnection even by one finger.
It is made in Nylon available in different colours. D12
Colour Code

Black D12 N

Yellow D12 G*

Blue D12 B*

Red D12 R*

* On request

Series
SD12
▲

Double bracket

The double bracket holds two PUSH-PULL couplings.

By coupling them on the sleeve the BREAKAWAY
function prevents accidental hose breakage.

Code SD12

Single bracket for male couplings

Series
SS12
▲

according to ISO 7241/A Standard 1/2” size.

This accessory can be applied on the agricultural implement
to hold the male coupling when disconnected.
It is possible to protect the single bracket with the automatic
dust cap TA 12 to prevent dirt contamination
when it is not in use.

Code SS12

The descriptions and illustrations in this catalogue are for information only and are not binding.
17
 Series
TM-TF
▲

PVC dust caps and plugs

These dust covers are made in a special oil-proof PVC
which can endure temperatures ranging from -30°C (-22°C)
to +100°C (+212°C). They are available in different colours.
On request it is possible to personalize them with a specific logo
on the basis of minimum quantities.

Colour Dust plug for female coupling Dust cap for male coupling

Blue TM 12 L TF 12

Orange TM 12 L/A TF 12 A

Yellow TM 12 L/G TF 12 G

Black TM 12 L/N TF 12 N
TM12
Red TM 12 L/R TF 12 R

Green TM 12 L/V TF 12 V

TF12

Series
TA12
▲

TA automatic dust caps

This dust cap has been specifically designed for PUSH-PULL

quick-release couplings. It closes itself automatically when the male
is disconnected, sealing off dust and dirt.
It is produced in Nylon with stainless steel springs and is particularly
resistant to weather changes and aging factors.
It is available in different colours.
On request it is possible to personalize them with specific logo
on the basis of minimum quantities.
TA automatic cap is also available in black colour with special lid
for coloured clips (TAID... code) to help lines identification.
For coloured clips codes see table at page 20.

Size Dust cap for female

Blue Yellow Red Black Green Brown

08 TA 12 TA 12 G TA 12 R TA 12 N TA 12 V TA 12 M
TAID12

TA12
The descriptions and illustrations in this catalogue are for information only and are not binding.
18
 Series

Automatic dust caps with oil collector

TNN-TA
▲

for PUSH-PULL couplings

These products are a combination between oil collectors
and automatic dust caps for PUSH-PULL quick-release
couplings type.
The fluid spillage during connection and disconnection
can thus be collected.
For groups of couplings fitted vertically, the caps can be joined
together with spacers of different lengths depending
on the interaxis required.
Produced in Nylon in various colours, on request,
it is possible to personalize them with a specific logo
on the basis of minimum quantities.

Patent
Application
Pending
▲

TNN-TA series

The TNN-TA series is the simplest and cheapest version

in the range of dust caps with oil-collector.
They can be mounted according to use and supplied
in the single version or with interaxis (see table) with straight
or 45° rubber holder. Please note that it is possible to insert
coloured clips to help identification.
1 = Nylon 6-6 bearing
Code Interaxis Code 2 = Zinc plated spacers
Straight rubber holder mm 45° rubber holder 3A = Nylon 6-6 straight
rubber holder
TNN 2 50 TA 50 TNN 2 50 TA 45
3B = Nylon 6-6
TNN 2 52 TA 52 TNN 2 52 TA 45 45° rubber holder
TNN 2 53 TA 53 TNN 2 53 TA 45 4 = PVC upper cap
TNN 2 55 TA 55 TNN 2 55 TA 45
5 = Nylon 6-6
TNN 2 56 TA 56 TNN 2 56 TA 45 automatic cap
TNN 2 58 TA 58 TNN 2 58 TA 45
TNN 2 59 TA 59 TNN 2 59 TA 45
TNN 2 60 TA 60 TNN 2 60 TA 45
TNN 2 61 TA 61 TNN 2 61 TA 45
TNN 2 63 TA 63 TNN 2 63 TA 45
TNN 2 66 TA 66 TNN 2 66 TA 45

Series
TAR
▲

TAR series

Modular automatic dust cap with horizontal opening:

thanks to its rectangular shape a perfect stability is achieved
with an high capability to connect oil even in no-horizontal
positions, when mounted in sequence.

1= cap
TAR code Interaxis TAR code
Straight rubber holder mm 45° rubber holder 2= TAR
oil collector automatic
dust cap
TAR 12 - TAR 12 45
3= straight rubber holder
4= 45° rubber holder

The descriptions and illustrations in this catalogue are for information only and are not binding.
19
 Series
TARV
▲

TARV series
Modular automatic oil-collection dust cap with vertical opening.
It has the same characteristics of the TAR dust cap,
but with vertical opening and reduced dimension.
Coloured clips for line identification are supplied separately.

TARV code Interaxis TARV code

Straight rubber holder mm 45° rubber holder
TARV 2 55 55 TARV 2 5545
TARV 2 61 61 TARV 2 6145
TARV 2 72 72 TARV 2 7245
TARV 2 82 82 TARV 2 8245
▲

TARVP series Series

TARV automatic caps are also available equipped with
an internal anti-splash diaphragm cartridge (TARVP code).
Thanks to this modular device, inserted into TARVP series
automatic dust caps, any spilled oil splash is prevented
TARVP
and a higher protection against dirt inclusions into TARV body
is achieved (see an example at page 16).
Equipped with a special diaphragm made of oil proof rubber,
this device can be assembled on every TARV
automatic dust cap.
For this reason the single diaphragm cartridge
is available too, with detailed instructions for assembling
(KIT CPS TARV12 code).

TARVP code Interaxis TARVP code

Straight rubber holder mm 45° rubber holder

TARVP 2 55 55 TARVP 2 5545

TARVP 2 61 61 TARVP 2 6145
TARVP 2 72 72 TARVP 2 7245
TARVP 2 82 82 TARVP 2 8245

Codice Colour Identification

ID B
ID G
ID R
ID V
▲

Coloured clips ID N
ID A
ID BI
Coloured clips to identify hydraulics lines.
They can be assembled on automatic caps Codice Colour Identification
ID B +
TA, TNNTA, TAR, TARV and TARVP series. ID G +
ID R +
ID V +
ID N +
ID BI+

Codice Colour Identification

ID B -
ID G -
ID R -
ID V -
ID N -
ID BI -

The descriptions and illustrations in this catalogue are for information only and are not binding.
20
 Series
TARV 12 BSC
▲

TARV 12 BSC series

NEW
Integrated single oil-collection tank.
Thanks to this system it is possible to eliminate
all the hoses conveying the oil spilled during
connection and disconnection.
The single oil-collection tank can be directly
assembled on PUSH-PULL couplings for rigid tubes
(3CFPV, 4SFPV, 4SEPV series) equipped with
TARV oil-collection cap.

Series
TAR 12 B
▲

TAR 12 B - TAR 12 BP series

Oil-collection tank, equipped with metallic bracket and linked

to the automatic oil-collector caps TNNTA, TAR, TARV

TAR 12 BP
and TARVP series. Any possible oil leakage
to the ground during connection and disconnection is prevented.
The oil-collection tank is available in two different volumes:
600 and 300 cc.
The complete kit consists of the tank, the Y junction
and one meter oil proof hose.
On the basis of minimum quantities the kit
can be assembled with cut to size hoses.

Oil-collection tank Tank bracket Complete version

Volume (cc.)
Code Code Code
TAR 12 B TAR 12 SB KIT TAR 12 B 600
TAR 12 BP TAR 12 SBP KIT TAR 12 BP 300

6 = oil-collection
tank

7 = tank bracket

The descriptions and illustrations in this catalogue are for information only and are not binding.
21
 Series
VF
▲

Features
•
•
•
•
Connection system: pulling back the sleeve
Disconnection system: pulling back the sleeve
Shut-off system: flat valve
Connectability: without pressure
VFS
•
•
Disconnection under pressure: not allowed
Interchangeability: according to ISO 5676 standard

• Balls-bearing latching system

• Additional safety sleeve (VFS series)
VFB
• Internal safety slider (VFB series) patented which allows
disconnection only once brakes are on.
• PVC dust cap for the male coupling available on request
(TFVF series)
• Steel plug for female part supplied together with the coupling
(TMVF series)

Patent
Application
Pending
▲

Technical data

Minimum burst pressure

DN Rated Force Max. work. Fluid
Nominal Flow to connect pressure spillage
Series Size diameter Connected Male Female
*
mm inc l/min. GPM N lb. MPa PSI MPa PSI MPa PSI MPa PSI cc. max.
VF 06 8 0.31 40 10.5 100 22 22 3190 110 15950 90 13050 90 13050 0.05
VFB 06 10 0.39 50 13.1 100 22 25 3625 100 14500 100 14500 100 14500 0.05

* Safety factor = 1:4 – for static pressure safety factor = 1:2

Pressure drop graph:

test bench to ISO 7241-2 specifications with oil viscosity 20 cSt (3°E)
and temperature 50°C (122°F).
Materials:
- Female in steel with wear parts carbonitrited.
- Male in high grade carbon steel, induction hardened.
- Steel valve.
- Surface treatment: zinc plating and yellow passivation.
- Springs in C98 steel.
- High resistance balls 100 C6.
Seals:
Standard in oilproof NBR (Nitrile Rubber). On request: Viton,
Neoprene, EPDM or other seals.
Working temperatures:
with standard seals in NBR (Nitrile Rubber) from -25 °C (-13°F)
to +125°C (+257°F).
For temperature exceeding these values, the quick-release coupling
will be supplied with all components in steel together with
the appropriate seals.

The descriptions and illustrations in this catalogue are for information only and are not binding.
22
▲
Available items

Female VF Female VFS Female VFB Male

VF
Series

VFS
VFB
B C ØD E F G CHF CHM CHD ØT
OEM’s
❖ Female ØA Standards users
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc.

VF 38GAS F 3/8” BSP DIN 3852-2-X 54,5 2,15 44 1,73 27 1,06 Q

VF 1815 F M18x1,5 DIN 3852-1-X 54,5 2,15 44 1,73 27 1,06 L
VF 2215 F M22x1,5 DIN 3852-1-X 54,5 2,15 44 1,73 27 1,06
06 VFS 38GAS F 3/8” BSP DIN 3852-2-X 54,5 2,15 44 1,73 27 1,06
VFS 1815 F M18x1,5 DIN 3852-1-X 54,5 2,15 44 1,73 27 1,06
VFB 38GAS F 3/8” BSP DIN 3852-2-X 83,5 3,29 44 1,73 27 1,06
VFB 1815 F M18x1,5 DIN 3852-1-X 83,5 3,29 44 1,73 27 1,06
VF 0/12GAS F 1/2” BSP DIN 3852 58,5 2,30 44 1,73 27 1,06

06

B C ØD E F G CHF CHM CHD ØT

OEM’s
❖ Male ØA Standards users
mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc. mm inc.

VF 1/12GAS M 1/2” BSP DIN 3852-2-B 44,8 1,76 58,8 2,31 14 0,55 32 1,26
VF 1/58S M 7/8” UNF SAE J 1926-3 36,2 1,43 48,8 1,92 12,6 0,50 32 1,26
06 VF 1/1615 M M16x1,5 ISO 6149-2 59,8 2,35 70,8 2,79 11 0,43 32 1,26 O
VF 1/1815 M M18x1,5 ISO 6149-2 42,8 1,69 56,8 2,24 14 0,55 32 1,26 F-I-P
* VF 1/2215 M M22x1,5 ISO 6149-2 42,8 1,69 56,8 2,24 14 0,55 32 1,26
* VF 5/2015 M M20x1,5 ISO 8434-1-L 30,8 1,21 53,8 2,12 32 1,26 27 1,06 12,2 0,48
VF 5/2215 M M22x1,5 ISO 8434-1-L 30,8 1,21 58,8 2,31 32 1,26 27 1,06 15,2 0,60
06 VF 7/1815 M M18x1,5 ISO 8434-1-L 30,8 1,21 51,8 2,04 32 1,26 24 0,94 12,2 0,48 L-M
VF 8/2015 M M20x1,5 ISO 8434-1-S 30,8 1,21 53,8 2,12 32 1,26 27 1,06 13,6 0,54 F-I-P
* VF 8/2415 M M24x1,5 ISO 8434-1-S 30,8 1,21 56,8 2,24 32 1,26 30 1,18 16,2 0,64
VF 9/1615 M M16x1,5 ISO 8434-1-L 30,8 1,21 M20x1,5 53,8 2,12 32 1,26 27 1,06 10,2 0,40 A-O
VF 9/1815 M M18x1,5 ISO 8434-1-L 30,8 1,21 M20x1,5 53,8 2,12 32 1,26 27 1,06 12,2 0,48 C-B-G-N
06

VF 14/58S M 7/8” UNF ISO 8434-2 30,8 1,21 63,8 2,51 32 1,26 Q

06

VF 17/38S M 11/16” UN ISO 8434-3 30,8 1,21 13/16” UN 60,8 2,39 11 0,43 32 1,26 H

06

VF 18/2015 M M14x1,5 DIN 3852 36,3 1,43 M20x1,5 58,3 2,30 22 0,87 32 1,26 H

06

❖ Size GAS = BSP *On request

Caption OEM’s Users

A - Agritalia D - Agco Fendt G - Case L - Landini O - Renault R - Steyr U - BCS
B - Claas E - Goldoni H - John Deere M - Massey Ferguson P - Same S - JCB
C - Deutz Fahr F - Hürlimann I - Lamborghini N - New Holland Italia Q - Valtra T - Antonio Carraro

The descriptions and illustrations in this catalogue are for information only and are not binding.
23
 Quick-release coupling block for automatic connection
▲

of several hydraulic, electrical and pneumatic lines.

The MULTIFASTER is a PATENTED multiple connection system
which allows simultaneous automatic connection of several hydraulic,
electrical and pneumatic lines.
The connection is simply achieved without any auxiliary
tool even at maximum working pressure.
Flat-face couplings used in the MULTIFASTER eliminate
oil spillage during disconnection and air inclusion during connection.
The fixed part of the MULTIFASTER is completely flat
in order to facilitate cleaning.
The MULTIFASTER can also be equipped with electrical
and pneumatic connections.

For further information

and technical details
please ask for the
specific catalogue.

CAT. 0111-GB
Multifaster series

Patent
Application
Pending
▲

THE NEW REVOLUTIONARY WAY OF THE QUICK-RELEASE COUPLING

• PATENTED system for simultaneous connection of several hydraulic, electrical and pneumatic lines.
• Eliminates the risk of lines inversion.
• Special seals made in Polyurethane against extrusion and wear.
• Safety locking device avoids accidental disconnection.
• Protective dust cap.
• Surface on fixed block completely flat: easy to be cleaned.
• Connectable and disconnectable under pressure.
• 3P MULTIFASTER series for an effortless connection under working pressure.
• Ecological: no spillage.
• Wide range of threads.
• Easy to be mounted also on pre-existent systems.
FASTER® exclusive technology

The descriptions and illustrations in this catalogue are for information only and are not binding.
24
▲

PUSH-PULL quick-release coupling Compact series

The CPV quick-release coupling maintains the same technical
characteristics of the PV series and, in addition, can be supplied
with a wide range of threads that eliminates the need for
adaptors and consequently reduces overall length and costs.
If panel mounted, this coupling series offers the PUSH-PULL
function (PV series).
In case of traditional fixing to the distributor or to rigid tubes
it has the same functions of the NV series.

For further information

and technical details
please ask for the
specific catalogue.

CAT. 0116
CPV-CNV and CVV series
▲

THE NEW REVOLUTIONARY WAY OF THE QUICK-RELEASE COUPLING

• Wide range of BSP, METRIC, NPT, SAE threads which allows customer to adapt the product to its needs,
saving extra-cost to buy adaptors.
• Valves are manufactured following the classic FASTER® method: induction hardened to avoid dents,
equipped with special profiled anti-extrusion seal.
• Special design of internal sections reduce pressure drops to a minimum.
• Couplings with internal components completely made of steel and with Viton seals are available on request.
• Double action sleeve with PUSH-PULL connection system and BREAKAWAY feature.

FASTER® exclusive technology

The descriptions and illustrations in this catalogue are for information only and are not binding.
25
 Agricultural series
quick-release couplings

▲
Applications

Series
MULTIFASTER
4SEPV
VF

Series
NV
PV
CPV

Series
3CFPV
VF

Dati e illustrazioni di questo catalogo sono indicativi e non impegnativi.

26
Series
3CFPV
VF

Series
NV
3CPV

Series

27
 Ask for our catalogues

CAT. 0110/I Italiano CAT. 0111-I Italiano CAT. 0112-I Italiano CAT. 0113-I Italiano
CAT. 0110/GB English CAT. 0111-GB English CAT. 0112-GB English CAT. 0113-GB English
CAT. 0110/F Français Multifaster series Agriculture series FF Flat-Face series
General Line

CAT. 0114-I Italiano CAT. 0115-I Italiano CAT. 0116-I Italiano CAT. 0117-I Italiano
CAT. 0114-GB English CAT. 0115-GB English CAT. 0116-GB English CAT. 0117-GB English
Screw-on coupling series Standard series CPV-CNV and CVV series DF series

▲
Guarantee

All FASTER® quick-release

couplings are designed and
produced in conformity with
the regulations of Quality
Managing System according
to UNI EN ISO 9001
and UNI ISO/TS 16949
Standards.
They bear the FASTER® logo
to guarantee their origin and
reliability.
FASTER® quick-release
couplings are distributed
worldwide through a network
of highly qualified distributors.
CAT. 0118-I Italiano CAT. 0119-I Italiano CAT. 0120-I Italiano
CAT. 0118-GB English CAT. 0119-GB English CAT. 0120-GB English
RF series VU series Industrial series
CAT 0112/09/06-GB

UNI EN ISO 9001

Cert. n° 2905
ISO/TS 16949

I - FASTER S.p.A. USA - FASTER Inc.

I-26027 RIVOLTA D’ADDA (CR) Italy - Via L. Ariosto, 7 MAUMEE, OH 43537-9505 - 6560 Weatherfield, Ct.
(+39) 0363.377211 - Fax (+39) 0363.377333 (+1) 419-868-8197 - (+1) 800-231-2501 - Fax (+1) 419-868-8360
www.faster.it - faster@faster.it www.fasterinc.com - eng@fasterinc.com

D-BENELUX - FASTER - Jürgen Gamers F - FASTER - François Divet UK - FASTER - Richard Bennett
D-40764 LANGENFELD GER - Ursulaweg, 39 F-35200 RENNES - 11, Rue Jean Bras GB-TA18 7BY UK
(+49) (0) 2173.83924 - Fax (+49) (0) 2173.83925 (+33) (0) 2.99.51.44.94 19 Beechwood Drive CREWKERNE, Somerset
www.faster-germany.de - JGamers@t-online.de Fax (+33) (0) 2.99.51.00.13 (+44) (0) 1460.77020 - Fax (+44) (0) 1460.77020
francois.divet@wanadoo.fr faster.uk@virgin.net