C

D 4000

76 x 76 x 6 M.S.
1850 1850
VERTICAL ANGLE
12mm MAX.

X X X X X X X X X X
20 NOS. 440 x 60 x 10
M.S. FLATS TAPERED AT
X X X X X X X X X X
THE TOP (SEE SECTION D-D)
10 80
10 200 215
3mm THICK
X X X X X X X X X X
M.S. PLATE WELDED
3 mm THICK

COVER PLATE
TO GATE FRAME

300
300
D

60
40
40 x 20 x 1.6 STEEL
AND GATE MEMBERS
HOLLOW SECTION

340
76 x 76 x 6 M.S. LOGO
ANGLE BARRELS TO BE
DIA. 30
A A 435
RIVETED OR WELDED

100 x 100 x 6 TO M.S. PLATE

STEEL HOLLOW

SECTION (3.50m LONG)

GATE POST

860
60 x 12 M.S.

FLATS GATE FRAME

44 x 44 x 5
B
M.S. ANGLE SECTION C-C
ELEVATION

300
SCALE 1 : 5
SCALE 1 : 5

18 NOS. GATE MEMBER

B
40 x 20 x 1.6 STEEL

HOLLOW SECTION EQUALLY

860
SPACED OVER A CLEAR

SPAN OF 1826

25mm SLOPE

900
/
0 20 M.S.

380 x 380 x 10 DROP BOLTS

BASE PLATE WELDED

300
300
WELDED TO GATE POST 80 x 80 x 75 GALV.

M.S. SLEEVE

50
12 MAX.
(12mm THICK)

1050 SQUARE
CONCRETE NOTES:
PILES AND FOUNDATION TO ENGINEER’S DETAILS
200 x 200 x 100

DEEP
1. 25mm x 5mm CLAMP BAR TO BE USED ON A LL

STRAINING POSTS AND ALL STEEL MEMBER OF

M.S. BAR GATE FOR HOLDING DOWN THE WIRE MESH.

435 x 40 x 10 FLAT
2. ALL BOLTS, NUTS, STAPLES AND WASHERS SHALL
4-METRE WIDE GATE 10
200
10 10 20 10
BE PLATED OR COATED WITH STAINLESS METAL.

3. THE MILD STEEL GATES AND GATE POSTS S HALL BE

SCALE 1 : 20
GALVANISED AND THEN PRIMED INTHE FACTORY . AFTER
PLAN ERECTION ON SITE, THE GATES AND THE GATE POSTS

SHALL BE PRIMED AGAIN AND PAINTED WITH T WO COATS

DETAIL OF LOCKING DEVICE ARRANGEMENT OF PAINT.

4. UNLESS OTHERWISE STATED ALL CONCRETE MIX

SCALE 1 : 5
TO BE GRADE 25 AND ABOVE.

5. EXCEPT WHERE OTHERWISE MODIFIED THE GATE SHALL

GENERALLY BE IN ACCORDANCE WITH B.S. 1722 PART 10.

2000
100 x 100 x 6 STEEL HOLLOW

SECTION (3.50m LONG)

3mm THICK M.S. PLATE
WELDED
WELDED TO GATE FRAME

M 10 DIA. STEEL BOLT

WELDED JOINT
12 MAX.

105
40 x 20 x 1.6 STEEL
300 x 3 THICK M.S. PLATE
HOLLOW SECTION
60 x 12 M.S. FLAT 25 x 5 CLAMP BAR 0
WELDED TO GATE FRAME CHAIN LINK FENCING 60

SECTION A-A
3mm THICK M.S. PLATE
SCALE 1 : 5

300
WELDED TO GATE FRAME 60 x 10 M.S.

AND GATE MEMBERS FLATS TAPERED

335
AT THE TOP

WELDED JOINT

SECTION B-B SECTION D-D

SCALE 1 : 5 SCALE 1 : 5

SCALES

ISSUED BY WATER RECLAMATION (NETWORK) DEPARTMENT

AS
ON APR ’05
STANDARD 4-METRE WIDE GATE FOR SEWAGE TREATMENT PLANT Water for All:Conserve,Value,Enjoy

SHOWN WATER RECLAMATION (NETWORK) DEPARTMENT

DRG. NO. PUB/WRN/STD/104

[ ORIGINAL BORDER SIZE 810mm X 565mm ]