Karam - Dienoc Series
Karam - Dienoc Series
Karam - Dienoc Series
DIENOC SERIES
WHY
DIENOC ? There is a challenge of being exposed to free-flowing current while working in Industries like Tower
erection, Mining, Transmission or Petroleum.
KARAM offers the Dienoc range of Harnesses having DIELECTRIC D-ring, Buckles and Frames. These are
specially designed for workers working in conditions where there are possible electrical hazards.
The special Plastic Coating on all the metal fittings makes the Dienoc Range electrically insulated. The maximum permissible
Dielectric Resistance of the Dienoc Range is 12kV.
-107-
Full Body Harnesses
The Dienoc Range of Harnesses and Lanyards has been specially designed for workers working in conditions where there are
possible electrical hazards. The use of a special plastic coating on all D-rings and fittings used in this range of Harnesses and
Lanyards are completely electrically insulated.
DIENOC HARNESSES
EN 361:2002 EN 361:2002
EN 358:2018
Technical Snapshot
-108-
Full Body Harnesses
DIENOC LANYARDS
KARAM introduces Dielectric Lanyards equipped with Dielectric Hooks for use in the transmission industry, offering full protection
against electrical hazards.
EN 355:2002 EN 355:2002
VG11/RfU Sheet 63
EN 355:2002 EN 355:2002
VG11/RfU Sheet 63
Technical Snapshot
Available
Ref. Specifications Attachment Elements Certified to
Length
1.0m
1.5m Dielectric Hook PN 166 at anchor-
PN 326(30)(DE) EN 355:2002
1.8m age end.
2.0m
1.5m
Two Dielectric Hooks PN 166 at EN 355:2002
PN 360(30)(DE) 1.8m
Made of 30mm wide polyester webbing. anchorage ends. VG11/RfU Sheet 63
2.0m
Energy Absorber PN 300 in 44mm wide
webbing which limits the impact of fall to 1.0m
Dielectric Hook PN 166 at
less than 6kN. 1.5m
PN 329(30)(DE) anchorage end and Dielectric Snap EN 355:2002
1.8m
Hook PN 172 at attachment end.
2.0m
Two Dielectric Hooks PN 166 at
1.5m
anchorage ends and Dielectric EN 355:2002
PN 361(30)(DE) 1.8m
Snap Hook PN 172 at attachment VG11/RfU Sheet 63
2.0m
end.
-109-