Mec1007 en
Mec1007 en
Mec1007 en
MEC1007A
Restrictions on use : Refer to available product literature or ask your local Sales Representative for
restrictions on use and dose limits.
Company : Importer/Distributor:
Malaysian Energy Chemical & Services Sdn Bhd.
Uzma Tower, Block H, No. 2
Jalan PJU 8/8A, Damansara Perdana
47820 Petaling Jaya, Selangor
TEL: +603-7611 4000
FAX: +603-7611 4105
GHS Classification
Skin corrosion : Category 1
Serious eye damage : Category 1
Specific target organ toxicity : Category 3 (Respiratory system)
- single exposure
1/9
SAFETY DATA SHEET
NALCO® MEC1007A
In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15
minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Get medical attention immediately.
In case of skin contact : Wash off immediately with plenty of water for at least 15 minutes. Use a mild
soap if available. Wash clothing before reuse. Thoroughly clean shoes before
reuse. Get medical attention immediately.
If swallowed : Rinse mouth with water. Do NOT induce vomiting. Never give anything by
mouth to an unconscious person. Get medical attention immediately.
Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put
yourself at risk of injury. If in doubt, contact emergency responders. Use
personal protective equipment as required.
Most important symptoms : See Section 11 for more detailed information on health effects and symptoms.
and effects, both acute and
delayed
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
Hazardous combustion : Decomposition products may include the following materials: Carbon oxides
products nitrogen oxides (NOx)
Specific extinguishing : Fire residues and contaminated fire extinguishing water must be disposed of in
methods accordance with local regulations. In the event of fire and/or explosion do not
breathe fumes.
2/9
SAFETY DATA SHEET
NALCO® MEC1007A
Personal precautions, : Ensure adequate ventilation. Keep people away from and upwind of spill/leak.
protective equipment and Avoid inhalation, ingestion and contact with skin and eyes. When workers are
emergency procedures facing concentrations above the exposure limit they must use appropriate
certified respirators. Ensure clean-up is conducted by trained personnel only.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions : Do not allow contact with soil, surface or ground water.
Methods and materials for : Stop leak if safe to do so. Contain spillage, and then collect with non-
containment and cleaning up combustible absorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to local / national
regulations (see section 13). Flush away traces with water. For large spills, dike
spilled material or otherwise contain material to ensure runoff does not reach a
waterway.
Advice on safe handling : Do not ingest. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in
eyes, on skin, or on clothing. Wash hands thoroughly after handling. Use only
with adequate ventilation.
Conditions for safe storage : Keep out of reach of children. Keep container tightly closed. Store in suitable
labelled containers.
Suitable material : The following compatibility data is suggested based on similar product data
and/or industry experience: Stainless Steel 304, Stainless Steel 316L, Carbon
steel, Plasite 6000, Plasite 7122, PTFE, Buna-N, Polyethylene, Polypropylene,
Compatibility with Plastic Materials can vary; we therefore recommend that
compatibility is tested prior to use.
Unsuitable material : The following compatibility data is suggested based on similar product data
and/or industry experience: Aluminum, Brass, Nickel, Polyurethane, Viton
Engineering measures : Effective exhaust ventilation system. Maintain air concentrations below
occupational exposure standards.
3/9
SAFETY DATA SHEET
NALCO® MEC1007A
Skin protection : Personal protective equipment comprising: suitable protective gloves, safety
goggles and protective clothing
Respiratory protection : When workers are facing concentrations above the exposure limit they must use
appropriate certified respirators.
Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. Remove
and wash contaminated clothing before re-use. Wash face, hands and any
exposed skin thoroughly after handling. Provide suitable facilities for quick
drenching or flushing of the eyes and body in case of contact or splash hazard.
Appearance : Liquid
Colour : colourless
Odour : Ammoniacal
Flash point : > 93.3 °C, Method: ASTM D 93, Pensky-Martens closed cup, minimum
pH : 10.5, 100 %, Method: ASTM E 70
Odour Threshold : no data available
Melting point/freezing point : FREEZING POINT: -35 °C
Initial boiling point and boiling : 100 °C
range
Evaporation rate : no data available
Flammability (solid, gas) : no data available
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : 50 mm Hg, (20 °C), ASTM D 323,
Relative vapour density : no data available
Relative density : 1.02 - 1.04, (25 °C),
Density : no data available
Water solubility : completely soluble
Solubility in other solvents : no data available
Partition coefficient: n- : no data available
octanol/water
Auto-ignition temperature : no data available
Thermal decomposition : no data available
temperature
Viscosity, dynamic : 5.5 mPa.s (25 °C), Method: ASTM D 2983
Viscosity, kinematic : 4.8 mm2/s (38 °C)
Molecular weight : no data available
VOC : 17 %, 174.95 g/l
4/9
SAFETY DATA SHEET
NALCO® MEC1007A
Inhalation : May cause respiratory irritation. May cause nose, throat, and lung irritation.
Chronic Exposure : Health injuries are not known or expected under normal use.
Toxicity
Product
Acute oral toxicity : LD50 rat: 3,053 mg/kg
Test substance: Product
Acute inhalation toxicity : Acute toxicity estimate: > 20 mg/l
Exposure time: 4 h
Acute dermal toxicity : LD50 rabbit: > 3,038 mg/kg
Test substance: Product
LD50 rabbit: > 3,083 mg/kg
Test substance: Product
Skin corrosion/irritation : Result: 5.0
Method: Draize Test
Test substance: Product
Serious eye damage/eye : Result: 43.7
irritation Method: Draize Test
Test substance: Product
5/9
SAFETY DATA SHEET
NALCO® MEC1007A
Ecotoxicity
Product
Toxicity to fish : LC50 Oncorhynchus mykiss (rainbow trout): 384 mg/l
Exposure time: 96 hrs
Test substance: Product
Toxicity to daphnia and other : EC50 Daphnia magna (Water flea): 331.2 mg/l
aquatic invertebrates Exposure time: 48 hrs
Test substance: Product
Components
Toxicity to algae : Morpholine
EC50 : 28 mg/l
Exposure time: 96 h
6/9
SAFETY DATA SHEET
NALCO® MEC1007A
Mobility
The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation
program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between
the total input and output. The level III model does not require equilibrium between the defined media. The
information provided is intended to give the user a general estimate of the environmental fate of this product
under the defined conditions of the models.
If released into the environment this material is expected to distribute to the air, water and soil/sediment in
the approximate respective percentages;
Air : <5%
Water : 30 - 50%
Soil : 50 - 70%
Bioaccumulative potential
Other information
no data available
The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are
in compliance with the selected mode of transport.
Land transport
7/9
SAFETY DATA SHEET
NALCO® MEC1007A
National Regulations
Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals)
Regulation 2013
Occupational Safety and Health Act 1994
Environmental Quality Act 1974
8/9
SAFETY DATA SHEET
NALCO® MEC1007A
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and
belief at the date of its publication. The information given is designed only as a guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or
quality specification. The information relates only to the specific material designated and may not be valid
for such material used in combination with any other materials or in any process, unless specified in the text.
9/9