ALP (IFCC), AU400/AU640 Serum/Plasma Application ALP (IFCC), AU600 Serum/Plasma Application

System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004 System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004
Specific Test Parameters Specific test parameters
General LIH ISE Range
Test No # Test name ALP04 ∇ Sample type Ser ∇ Page ½
Test Name: ALP04 ∇ < > Type: Serum ∇ Operation: Yes ∇
Sample vol. 3 Dil. Vol 0 μL Min. OD Max. OD
Sample: Volume 3 μL Dilution 0 μL Pre-Dilution Rate: 1 Reagent 1 vol 60 Dil. Vol 60 μL L 0.0 H 2.5
Reagents: R1 Volume 60 μL Dilution 60 μL Min OD Max OD Reagent 2 vol 60 Dil. Vol 60 μL Reagent OD limit
R2 Volume 60 μL Dilution 60 μL L 0.0 H 2.5 Fst. L 0.0 Fst. H 1.2
Reagent OD limit: Wave Main 410 Sub 480 ∇ Lst. L 0.0 Lst. H 1.2
Wavelength: Pri. 410 ∇ Sec. 480 ∇ First L 0.0 First H 1.2 Method RATE ∇ Dynamic range
Method: RATE ∇ Last L 0.0 Last H 1.2 Reaction + ∇ L 5* H 1500*
Reaction slope: + ∇ Dynamic Range: Point 1 Fst 13 Lst 19 Correlation factor A 1
Measuring Point 1: First 13 Last 19 L 5* H 1500* Point 2 Fst Lst B 0
Measuring Point 2: First Last Correlation Factor: Sample Pre-dil Rate ¤

SERUM/PLASMA APPLICATION
Linearity : 15 % A 1 B 0
No Lag Time: NO ∇ On-board stability period: 14 Linearity Fst 15 % Sec %
No lag time NO ∇ On-board stability period 14
Select using Space key, or select from list displayed by Guide key
Specific Test Parameters
General LIH ISE Range Test No # Test name ALP04 ∇ Sample type Ser ∇ Page 2/2
Test Name: ALP04 ∇ < > Type: Serum ∇ Level L Level H
Value/flag # ∇ # #
Value/Flag: # ∇ Level L: # Level H: # Normal range
Normal Ranges: Age L Age H Sex Age L Age H L H
Sex Year Month Year Month L H 1 # ∇ # Y # M # Y # M→ # #
R 1. # ∇ # # # # # # 2 # ∇ # Y # M # Y # M→ # #
R 2. # ∇ # # # # # # 3 # ∇ # Y # M # Y # M→ # #
R 3. # ∇ # # # # # # 4 # ∇ # Y # M # Y # M→ # #
R 4. # ∇ # # # # # # 5 # ∇ # Y # M # Y # M→ # #
R 5. # ∇ # # # # # # 6 # ∇ # Y # M # Y # M→ # #
R 6. # ∇ # # # # # # 7 Non select # #
7. None Selected # # 8 Out of range # #
8. Out of Range L H # # L H
Panic Value: # # Unit: U/L* Decimal places: # Panic value # #
Select the function using the Function key or the Mouse
Calibration specific
Calibration Specific
General ISE Test No # Test name ALP04 ∇
Test Name: ALP04 ∇ < > Type Serum ∇ Cal type 1 MB ∇ Count #
Calibration Type: MB ∇ Formula:
Formula 1 Y=AX+B ∇ Process Conc ∇
Y=AX+B ∇ Counts: # Process: CONC ∇
Selection calibrator
Cal No OD Conc Factor/OD-L Factor/OD-H
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1 § ∇ § § 4000* § 6500*
Point 1: § § § 4000* § 6500*
Point 2:
Point 2 ∇
Point 3: Point 3 ∇
Point 4: Point 4 ∇
Point 5: Point 5 ∇
Point 6: Point 6 ∇
Point 7: Point 7 ∇
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration # ∇ 1-point cal. Point
MB type factor #
MB Type Factor: # Calibration Stability Period: ‡ ‡
Calibrator stability period
Select the function using the Function key or the Mouse
# User defined
# User defined ¤ Analyser default value
§ For use in the AB mode only, refer to IFU for further instruction
§ For use in the AB mode only, refer to IFU for further instruction
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
‡ Depends on usage pattern in the Laboratory
‡ Depends on usage pattern in the Laboratory

Enzyme BSOSR6x04.02
2011-03
ALP (IFCC), AU2700/AU5400 Serum/Plasma Application ALP (IFCC), AU680/AU480 Serum/Plasma Application
System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004 System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004
Parameters Specific Test Parameters
Specific Test Parameters General LIH ISE HbA1c Calculated Test Range
General LIH ISE Range
Test Name: ALP04 ∇ < > Type: Serum ∇ Operation Yes ∇
Test Name: ALP04 < > Type: Serum ∇ Operation: Yes ∇

Sample: Volume 1.8 μL Dilution 0 μL Pre-Dilution Rate: 1 Sample Volume 1.8 μL Dilution 0 μL OD Limit
Pre-Dilution Rate 1 ∇ Min.OD -0.1 Max.OD 2.5
Reagents: R1 Volume 36 μL Dilution 36 μL Min OD Max OD
Rgt. Volume R1(R1-1) 36 μL Dilution 36 μL Reagent OD Limit
R2 Volume 36 μL Dilution 36 μL L -0.1 H 2.5
First Low -0.1 High 1.2
Reagent OD limit: 0.3
Last Low -0.1 High 1.2
Wavelength: Pri. 410 ∇ Sec. 480 ∇ First L -0.1 First H 1.2
R2(R2-1) 36 μL Dilution 36 μL
Method: RATE ∇ Last L -0.1 Last H 1.2
Dynamic Range Low 5* High 1500*
Reaction slope: + ∇ Dynamic Range: Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Measuring Point 1: First 16 Last 27 L 5* H 1500* Wavelength Pri 410 ∇nm Sec. 480 ∇nm Factor for Maker A 1 B 0
Measuring Point 2: First Last Correlation Factor: Method RATE ∇

SERUM/PLASMA
Linearity : 15 % A 1 B 0

SERUM/PLASMA APPLICATION
Reaction Slope + ∇ Onboard Stability Period 14 Day 0 Hour
No Lag Time: NO ∇ On-board stability period: 14 Measuring Point1 First 16 Last 27 LIH Influence Check # ∇
Measuring Point2 First Last Lipemia +++++ ∇
Linearity Limit 15 % Icterus ++++ ∇
Specific Test Parameters Lag Time Check NO ∇ Hemolysis +++++ ∇
General LIH ISE Range
Parameters Specific Test Parameters
Test Name: ALP04 ∇ < > Type: Serum ∇ General LIH ISE HbA1c Calculated Test Range

Value/Flag: # ∇ Level L: # Level H: # Test Name: ALP04 ∇ < > Type: Serum ∇
Normal Ranges: Age L Age H
Sex Year Month Year Month L H Value/Flag: # ∇ Low High
R 1. # ∇ # # # # # # Level # # Panic Value
Specific Ranges: From To Low High
R 2. # ∇ # # # # # #
Sex Year Month Year Month Low High # #
R 3. # ∇ # # # # # # R 1. # ∇ # # # # # #
R 4. # ∇ # # # # # # R 2. # ∇ # # # # # #

APPLICATION
R 5. # ∇ # # # # # # R 3. # ∇ # # # # # #
R 6. # ∇ # # # # # # R 4. # ∇ # # # # # #
7. None Selected # # R 5. # ∇ # # # # # #
8. Out of Range L H # # R 6. # ∇ # # # # # #
Panic Value: # # Unit: U/L* Decimal places: # 7. No demographics # #
8. Not within expected values # #
Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibration Specific
Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: ALP04 ∇ < > Type Serum ∇ R
Test Name: ALP04 ∇ < > Type Serum ∇ Use Serum Cal.
Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇ Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # ∇
<Calibrator Parameters> Range
Cal. No. OD CONC Factor/OD-L Factor/OD-H Calibrator OD Conc Low High Slope Check None ∇
Point 1: § § § 4000* § 6500* Point 1: § ∇ § §4000* §6500*
Point 2: Point 2: ∇ Allowance Range Check
Point 3: Point 3: ∇
Point 4: Point 4: ∇ R Reagent Blank
Point 5: Point 5: ∇ R Calibration
Point 6: Point 6: ∇
Point 7: Point 7 ∇ Advanced Calibration
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ Point 8 ∇ Operation # ∇
MB Type Factor: # Calibration Stability Period: ‡ Point 9 ∇
Point 10 ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ R Lot Calibration
# User defined Master Curve> OD Range
§ For use in the AB mode only, refer to IFU for further instruction Calibrator OD Conc Low High Stability
* Values set for working in U/L To work in SI units (µkat/L) divide by 60 Point-1 ∇ Reagent Blank ‡ Day ‡ Hour
‡ Depends on usage pattern in the Laboratory Point-2 ∇ Calibration Day Hour
ф AU680
MB Type Factor: # 1-Point Calibration Point ∇ R with Conc-0

Enzyme BSOSR6x04.02
2011-03
ALP (IFCC), AU5800 Serum/Plasma Application
System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range

Test Name: ALP04 ∇ < > Type: Serum ∇ Operation Yes ∇

Sample Volume 1.4 μL Dilution 0 μL OD Limit

Pre-Dilution Rate 1 ∇ Diluent Bottle # ∇ Min.OD -0.1 Max.OD 2.5
Rgt. Volume R1(R1-1) 28 μL Dilution 28 μL Reagent OD Limit
st
R1-2 μL Dilution μL 1 . Low -0.1 High 1.2
Last Low -0.1 High 1.2
R2(R2-1) 28 μL Dilution 28 μL
Dynamic Range Low 5* High 1500*
Common Rgt. Type None Name None Correlation Factor A 1 B 0
Wavelength Pri 410 ∇nm Sec. 480 ∇nm Factor for Maker A 1 B 0
Method RATE ∇
Reaction Slope + ∇ Onboard Stability Period 7 Day 0 Hour
Measuring Point1 1st 16 Last 27 LIH Influence Check # ∇
Measuring Point2 1st Last Lipemia +++++ ∇

SERUM/PLASMA APPLICATION
Linearity Limit 15 % Icterus ++++ ∇
Lag Time Check NO ∇ Hemolysis +++++ ∇

Parameters Specific Test Parameters

General LIH ISE HbA1c Calculated Test Range

Test Name: ALP04 ∇ < > Type: Serum ∇

Value/Flag: # ∇ .
Level Low # High #
Specific Ranges: From To
Sex Year Month Year Month Low High
R 1. # ∇ # # # # # #
R 2. # ∇ # # # # # #
R 3. # ∇ # # # # # #
R 4. # ∇ # # # # # #
R 5. # ∇ # # # # # #
R 6. # ∇ # # # # # #
7. Standard demographics # #
8. Not within expected values # #
Panic Value Low # High # Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibrators Calibration Specific
General ISE

Test Name: ALP04 ∇ < > Type Serum ∇ Cuvette . ∇

□ Use Serum Cal.

Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # ∇

<Calibrator Parameters> Range
Calibrator OD Conc Low High Slope Check ∇
Point 1: § ∇ § §4000* §6500*
Point 2: ∇ Allowance Range Check
Point 3: ∇
Point 4: ∇ □ Reagent Blank
Point 5: ∇ □ Calibration
Point 6: ∇
Point 7: ∇ Advanced Calibration
Point 8: ∇ Operation # ∇
Point 9: ∇
Point 10: ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ □ Lot Calibration
Master Curve> OD Range
Calibrator OD Conc Low High Stability
Point-1 ∇ Reagent Blank ‡ Day 0 Hour # User defined
Point-2 ∇ Calibration ‡ Day 0 Hour * Values set for working in U/L. To work in SI units (µkat/L) divide by 60
§ For use in AB mode only, refer to IFU for further instruction
MB Type Factor: # 1-Point Calibration Point ∇ □ with Conc-0 ‡ Depends on usage pattern in the Laboratory

Enzyme BSOSR6x04.02
2011-03
ALP (IFCC), AU400/AU640 Paediatric Application ALP (IFCC), AU600 Paediatric Application
System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004 System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004

Specific Test Parameters Specific test parameters

General LIH ISE Range
Test No # Test name ALP4P ∇ Sample type Ser ∇ Page 1/2
Test Name: ALP4P ∇ < > Type: Serum ∇ Operation: Yes ∇
Sample vol. 3 Dil. vol 10 μL Min. OD Max. OD
Sample: Volume 3 μL Dilution 10 μL Pre-Dilution Rate: 1 Reagent 1 vol 60 Dil. vol 60 μL L 0.0 H 2.5
Reagents: R1 Volume 60 μL Dilution 60 μL Min OD Max OD Reagent 2 vol 60 Dil. vol 50 μL Reagent OD limit
R2 Volume 60 μL Dilution 50 μL L 0.0 H 2.5 Fst. L 0.0 Fst. H 1.2
Reagent OD limit: Wave Main 410 Sub 480 ∇ Lst. L 0.0 Lst. H 1.2
Wavelength: Pri. 410 ∇ Sec. 480 ∇ First L 0.0 First H 1.2 Method RATE ∇ Dynamic range
Method: RATE ∇ Last L 0.0 Last H 1.2 Reaction + ∇ L 5* H 1500*
Reaction slope: + ∇ Dynamic Range: Point 1 Fst 13 Lst 19 Correlation factor A 1
Measuring Point 1: First 13 Last 19 L 5* H 1500* Point 2 Fst Lst B 0
Measuring Point 2: First Last Correlation Factor: Sample Pre-dil Rate ¤
Linearity : 15 % A 1 B 0
No Lag Time: NO ∇ On-board stability period: 14 Linearity Fst 15 % Sec %

PAEDIATRIC APPLICATION
No lag time NO ∇ On-board stability period 14
Select using Space key, or select from list displayed by Guide key
Specific Test Parameters
General LIH ISE Range Test No # Test name ALP4P ∇ Sample type Ser ∇ Page 2/2
Test Name: ALP4P ∇ < > Type: Serum ∇ Level L Level H
Value/flag # ∇ # #
Value/Flag: # ∇ Level L: # Level H: # Normal range
Normal Ranges: Age L Age H Sex Age L Age H L H
Sex Year Month Year Month L H 1 # ∇ # Y # M # Y # M→ # #
R 1. # ∇ # # # # # # 2 # ∇ # Y # M # Y # M→ # #
R 2. # ∇ # # # # # # 3 # ∇ # Y # M # Y # M→ # #
R 3. # ∇ # # # # # # 4 # ∇ # Y # M # Y # M→ # #
R 4. # ∇ # # # # # # 5 # ∇ # Y # M # Y # M→ # #
R 5. # ∇ # # # # # # 6 # ∇ # Y # M # Y # M→ # #
R 6. # ∇ # # # # # # 7 Non select # #
7. None Selected # # 8 Out of range # #
8. Out of Range L H # # L H
Panic Value: # # Unit: U/L* Decimal places: # Panic value # #
Select the function using the Function key or the Mouse
Calibration specific
Calibration Specific
General ISE Test No # Test name ALP4P ∇
Test Name: ALP4P ∇ < > Type Serum ∇ Cal type 1 MB ∇ Count #
Calibration Type: MB ∇ Formula:
Formula 1 Y=AX+B ∇ Process Conc ∇
Y=AX+B ∇ Counts: # Process: CONC ∇
Selection calibrator
Cal No OD Conc Factor/OD-L Factor/OD-H
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1 § ∇ § § 4000* § 6500*
Point 1: § § § 4000* § 6500*
Point 2:
Point 2 ∇
Point 3: Point 3 ∇
Point 4: Point 4 ∇
Point 5: Point 5 ∇
Point 6: Point 6 ∇
Point 7: Point 7 ∇
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ 1-point cal. point
MB type factor #
MB Type Factor: # Calibration Stability Period: ‡ ‡
Calibrator stability period
Select the function using the Function key or the Mouse
# User defined
# User defined ¤ Analyser default value
§ For use in the AB mode only, refer to IFU for further instruction
§ For use in the AB mode only, refer to IFU for further instruction
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
‡ Depends on usage pattern in the Laboratory
‡ Depends on usage pattern in the Laboratory

Enzyme BSOSR6x04.02
2011-03
ALP (IFCC), AU2700/AU5400 Paediatric Application ALP (IFCC), AU680/AU480 Paediatric Application
System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004 System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
Specific Test Parameters
General LIH ISE Range
Test Name: ALP4P ∇ < > Type: Serum ∇ Operation Yes ∇

Test Name: ALP4P < > Type: Serum ∇ Operation: Yes ∇

Sample Volume 1.8 μL Dilution 10 μL OD Limit
Sample: Volume 1.8 μL Dilution 10 μL Pre-Dilution Rate: 1 Pre-Dilution Rate 1 ∇ Min.OD -0.1 Max.OD 2.5
Reagents: R1 Volume 36 μL Dilution 36 μL Min OD Max OD Rgt. Volume R1(R1-1) 36 μL Dilution 36 μL Reagent OD Limit
First Low -0.1 High 1.2
R2 Volume 36 μL Dilution 26 μL L -0.1 H 2.5
Last Low -0.1 High 1.2
Reagent OD limit: 0.3
R2(R2-1) 36 μL Dilution 26 μL
Wavelength: Pri. 410 ∇ Sec. 480 ∇ First L -0.1 First H 1.2
Dynamic Range Low 5* High 1500*
Method: RATE ∇ Last L -0.1 Last H 1.2
Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Reaction slope: + ∇ Dynamic Range:
Wavelength Pri 410 ∇nm Sec. 480 ∇nm Factor for Maker A 1 B 0
Measuring Point 1: First 16 Last 27 L 5* H 1500*
Method RATE ∇
Measuring Point 2: First Last Correlation Factor:
Reaction Slope + ∇ Onboard Stability Period 14 Day 0 Hour
Linearity : 15 % A 1 B 0
Measuring Point1 First 16 Last 27 LIH Influence Check # ∇
No Lag Time: NO ∇ On-board stability period: 14
Measuring Point2 First Last Lipemia +++++ ∇

PAEDIATRIC APPLICATION
Linearity Limit 15 % Icterus ++++ ∇
Lag Time Check NO ∇ Hemolysis +++++ ∇
Specific Test Parameters
General LIH ISE Range Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range
Test Name: ALP4P ∇ < > Type: Serum ∇
Test Name: ALP4P ∇ < > Type: Serum ∇
Value/Flag: # ∇ Level L: # Level H: #
Normal Ranges: Age L Age H Value/Flag: # ∇ Low High
Sex Year Month Year Month L H Level # # Panic Value
R 1. # ∇ # # # # # # Specific Ranges: From To Low High
Sex Year Month Year Month Low High # #
R 2. # ∇ # # # # # #
R 1. # ∇ # # # # # #
R 3. # ∇ # # # # # # R 2. # ∇ # # # # # #
R 4. # ∇ # # # # # # R 3. # ∇ # # # # # #
R 5. # ∇ # # # # # # R 4. # ∇ # # # # # #
R 6. # ∇ # # # # # # R 5. # ∇ # # # # # #
7. None Selected # # R 6. # ∇ # # # # # #
8. Out of Range L H # # 7. No demographics # #
Panic Value: # # Unit: U/L* Decimal places: # 8. Not within expected values # #
Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibration Specific Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: ALP4P ∇ < > Type Serum ∇ R Use Serum Cal.
Test Name: ALP4P ∇ < > Type Serum ∇
Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # ∇
Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇
<Calibrator Parameters> Range
Calibrator OD Conc Low High Slope Check None ∇
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1: § ∇ § §4000* §6500*
Point 1: § § § 4000* § 6500*
Point 2: ∇ Allowance Range Check
Point 2: Point 3: ∇
Point 3: Point 4: ∇ R Reagent Blank
Point 4: Point 5: ∇ R Calibration
Point 5: Point 6: ∇
Point 6: Point 7 ∇ Advanced Calibration
Point 7: Point 8 ∇ Operation # ∇
1-Point Cal. Point: R with CONC-0 Slope Check: None ∇ Advanced Calibration: # ∇ Point 9 ∇
MB Type Factor: # Calibration Stability Period: ‡ Point 10 ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ R Lot Calibration
Master Curve> OD Range
# User defined Calibrator OD Conc Low High Stability
§ For use in the AB mode only, refer to IFU for further instruction Point-1 ∇ Reagent Blank ‡ Day ‡ Hour
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60 Point-2 ∇ Calibration Day Hour
‡ Depends on usage pattern in the Laboratory MB Type Factor: # 1-Point Calibration Point ∇ R with Conc-0
ф AU680

Enzyme BSOSR6x04.02
2011-03
ALP (IFCC), AU5800 Paediatric Application
System Reagent: OSR6004, OSR6104, OSR6204 Reagent ID: 004
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range

Test Name: ALP4P ∇ < > Type: Serum ∇ Operation Yes ∇

Sample Volume 1.4 μL Dilution 10 μL OD Limit

Pre-Dilution Rate 1 ∇ Diluent Bottle # ∇ Min.OD -0.1 Max.OD 2.5
Rgt. Volume R1(R1-1) 28 μL Dilution 28 μL Reagent OD Limit
st
R1-2 μL Dilution μL 1 . Low -0.1 High 1.2
Last Low -0.1 High 1.2
R2(R2-1) 28 μL Dilution 18 μL
Dynamic Range Low 5* High 1500*
Common Rgt. Type None Name None Correlation Factor A 1 B 0
Wavelength Pri 410 ∇nm Sec. 480 ∇nm Factor for Maker A 1 B 0
Method RATE ∇

SERUM/PLASMA
Reaction Slope + ∇ Onboard Stability Period 7 Day 0 Hour
Measuring Point1 1st 16 Last 27 LIH Influence Check # ∇
Measuring Point2 1st Last Lipemia +++++ ∇
Linearity Limit 15 % Icterus ++++ ∇
Lag Time Check NO ∇ Hemolysis +++++ ∇

PAEDIATRICAPPLICATION
Parameters Specific Test Parameters
General LIH ISE HbA1c Calculated Test Range

Test Name: ALP4P ∇ < > Type: Serum ∇

Value/Flag: # ∇ .
Level Low # High #
Specific Ranges: From To
Sex Year Month Year Month Low High
R 1. # ∇ # # # # # #
R 2. # ∇ # # # # # #
R 3. # ∇ # # # # # #

APPLICATION
R 4. # ∇ # # # # # #
R 5. # ∇ # # # # # #
R 6. # ∇ # # # # # #
7. Standard demographics # #
8. Not within expected values # #
Panic Value Low # High # Unit U/L* Decimal Places #
Parameters Calibration Parameters
Calibrators Calibration Specific
General ISE

Test Name: ALP4P ∇ < > Type Serum ∇ Cuvette . ∇

□ Use Serum Cal.

Calibration Type: MB ∇ Formula: Y=AX+B ∇ Counts: # ∇

<Calibrator Parameters> Range
Calibrator OD Conc Low High Slope Check ∇
Point 1: § ∇ § §4000* §6500*
Point 2: ∇ Allowance Range Check
Point 3: ∇
Point 4: ∇ □ Reagent Blank
Point 5: ∇ □ Calibration
Point 6: ∇
Point 7: ∇ Advanced Calibration
Point 8: ∇ Operation # ∇
Point 9: ∇
Point 10: ∇ Interval (RB/ACAL) # ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ □ Lot Calibration
Master Curve> OD Range
Calibrator OD Conc Low High Stability
Point-1 ∇ Reagent Blank ‡ Day ‡ Hour # User defined
Point-2 ∇ Calibration ‡ Day ‡ Hour § For use in the AB mode only, refer to IFU for further instruction
* Values set for working in U/L. To work in SI units (µkat/L) divide by 60
MB Type Factor: # 1-Point Calibration Point ∇ □ with Conc-0
‡ Depends on usage pattern in the Laboratory

Enzyme BSOSR6x04.02
2011-03