Nothing Special   »   [go: up one dir, main page]

TTControl Vision 312plus Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Vision 312Plus

Description
Vision 312Plus is a robust 12.1" touchscreen display
with built-in, high-end Vision 3 display controller with a
quad-core multimedia processor and solid protection
for use in off-highway vehicles. Beside various
communication interfaces the display is ready for
direct connection of 4 cameras and enables audio
output via integrated loudspeaker. The Vision 312Plus
is optically bonded for perfect sunlight readability, the
housing is sealed, and the device withstands extreme
temperature, shocks and vibrations.

Specifications System components


• NXP i.MX6 application processor, 32bit ARM,
Display diagonal size 12.1" 16:10 aspect ratio 1 GHz, QuadPlus core
306 mm x 212 mm x 34 mm • 8 GB eMMC Flash, 2 GB RAM
Dimensions
(46 mm incl. connector) • RTC buffered by supercapacitor
Weight 2.1 kg • Display backlight auto-dimmable via ambient
Resolution 1280 (W) x 800 (H) pixel light sensor
TFT (thin film transistor) • Internal temperature sensors for ambient and
LCD type
active matrix CPU temperature
Backlight LED • Panel or cabin mount, landscape or portrait
orientation
Optical characteristics • Projective capacitive touchscreen
• Optically bonded
Luminance 1000 cd /m² typ.
Viewing angle V = ± 89° Interfaces
H = ± 89° • 4 x video input for external composite video
Contrast ratio 1000:1 cameras (four simultaneous video streams)
• 4 x CAN (one ISOBUS compliant), 25 kbit/s up
Maximum ratings to 1 Mbit/s
• 1 x 100Base-TX Ethernet
Operating -30 to +70 °C (ambient) • 2 x USB 2.0 (1 x OTG and 1 x HOST)
temperature • Terminal 15 for ignition input
Storage temperature -30 to +85 °C
• RGB status LED
Supply voltage 8 to 32 V
• 1 x RS-232
Standards • 1 x integrated loudspeaker

CE 2014/30/EU Software
UKCA SI 2016 no. 1091 • Programmable with CODESYS® V3 with
E-Mark ECE 10R enhanced target visualization, including support
EMC ISO 13766 for CANopen® master or C/C++
EN 13309 • Display of videos, pdf-files and animations
ISO 7637-3 • Picture-in-picture functionality
ESD ISO 13766 • Sleep mode - wake-up to full operation within
ISO 10605 less than half a second. Configurable wake-up
Electrical ISO 16750-2 sources: touchscreen, wake-up input, RTC and
Ingress Protection EN 60529 IP65 CAN interfaces
ISO 20653 IP6k5
Climatic ISO 16750-4 Reverse polarity protection and protection of all
Mechanical ISO 16750-3 external interfaces (except USB) against short
circuit to GND and BAT+.

TTControl S.r.l. – Brixen, Italy TTControl GmbH – Vienna, Austria


Tel.: +39 0472 26 80-11 products@ttcontrol.com, www.ttcontrol.com Tel.: +43 1 585 34 34-0
Block diagram

eMMC Flash: 8 GB
100BASE-TX 11

Communication
CPU QuadPlus core

interfaces
DDR3 RAM: 2 GB NXP i.MX6 (multimedia processor)
ARM
RS-232 1
32 bit / 1 GHz

Real-time clock CAN 4


Supercapacitor buffered
USB 2.0 2

(User) 1
Interfaces

Terminal 15 key
1 switch
Touchscreen
12.1" LCD
LED backlighting
1 Wake-up pin 1280x800
optically bonded
4 Analog camera
Loudspeaker
Ambient
Keypadlight
withsensor
backlight
for auto dimming
10 keys

Subject to changes and corrections. Vision 312Plus is a product name of TTControl GmbH. CODESYS® is a registered trademark of
CODESYS GmbH. CANopen® and CiA® are registered community trademarks of CAN in Automation). All other trademarks are the property
of their respective holders. To the extent possible under applicable law, TTControl hereby disclaims any and all liability for the content and
use of this product flyer.

Copyright © TTControl GmbH. All rights reserved.

You might also like