SealArm PU 2K PF-Ver6
SealArm PU 2K PF-Ver6
SealArm PU 2K PF-Ver6
A
SealArm PU 2K PF
A Two Component Polyurethane, pitch free,
Elastomeric Pavement Sealant TECHNICAL DATA SHEET
Product Description
SealArm PU 2K PF is a low modulus, two part polyurethane, pitch free, cold applied elastomeric pavement designed for
joints in concrete pavements.
Step no. 1: Surface Preparation: Mixed material is applied using either 600ml or 1500 ml
Joints to be sealed shall be properly formed as per the solid barrel gun. For wider joints sealant can be poured.
designed dimensions. Joint surfaces shall be free from
dirt, laitance and other contaminates viz. grease, oil etc. .
Backing roads of required size shall be placed in the Technical Data
prepared joints to the required depth.
Shake the one component SealArm Primer PS before Curing agent Liquid
use. Application of primer shall be done using a small
Colour Grey
brush. One coat of primer shall be applied on the joint
sides and it shall be ensured excessive priming is Movement accommodation
Butt joints 30%
avoided. Sealant application to be done when the primer factor (BS 6093)
is still tacky. Repriming to be done if the primer is totally
Curing mechanism Chemical cure
dried out at the time of sealant application.
0
Setting time After 10 to 16 hours @ 35 C
Step no. 3: Application Instructions for SealArm
PU 2K PF sealant: Hardness shore 'A' at 25 C
0
15 ± 5
Transfer the entire content of curing agent tin into base
component tin which is larger. Mix the components for 3- Solids content 99%
4 minutes using a slow speed, hand held drill (300-
Mixed Density 1.37 kg/litre
400rpm) which is fitted with a stirrer. Take care to ensure
that materials on the top of the tin adhered if any are
scraped after mixing for a minute and continued. Avoid
over mixing of components.
Ver/6/Jun 2022 1 of 2
Building & Joint Sealant
SealArm PU 2K PF
A Two Component Polyurethane, pitch free,
Elastomeric Pavement Sealant TECHNICAL DATA SHEET
Legal Note
The information, and, in particular, the recommendations relating to the application and end-use of MYK Arment products, are given in good
faith based on MYK Arment current knowledge and experience of the products when properly stored, handled and applied under normal
conditions in accordance with MYK Arment’s recommendations. In practice, the difference in materials, substrates and actual site conditions
are such that no warranty in respect of merchant ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship
whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of
the product must test the product's suitability for the intended application & purpose. MYK Arment reserves the right to change the properties of
its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery.
Users must always refer to the most recent issue of the local product data sheet for the product concerned, copies of which will be supplied on
request.
Ver/6/Jun 2022 2 of 2