(Sample) 6143-MAR-CU-0048 - R0 - Material Approval Request - Sikadur®-31 CF Slow
(Sample) 6143-MAR-CU-0048 - R0 - Material Approval Request - Sikadur®-31 CF Slow
(Sample) 6143-MAR-CU-0048 - R0 - Material Approval Request - Sikadur®-31 CF Slow
Sikadur – 31 CF Slow
COMPANY Doc. No. : 6143-MAR-CU-0048
Class 1 Rev-0 Page: 1 of 2
CONTRACTOR Doc. No. : SO6044-CA0R-MAR-4000-0048
COMPANY
HOME OFFICE v
SITE OFFICE
CONTRACTOR
ADNOC REFINING PROJECT v
PROCESS
WASTE HEAT RECOVERY PROJECT (WHRP) PIPING v
MACHINERY
STATIONARY
ELECTRICAL
INSTRUMENT
CIVIL v
BUILDING
STEEL
STRUCTURE
PROCUREMENT
CONSTRUCTION v
QA / QC v
HSE v
IT
ABU
ABUDHABI
DHABINATIONAL
NATIONALOIL
OILCOMPANY
COMPANY(ADNOC)
(ADNOC)REFINING
REFINING
SAMSUNG
SAMSUNGENGINEERING
ENGINEERINGCO.,
CO.,LTD.
LTD.
Material Approval Request of
Sikadur – 31 CF Slow
COMPANY Doc. No. : 6143-MAR-CU-0048
Class 1 Rev-0 Page: 2 of 2
CONTRACTOR Doc. No. : SO6044-CA0R-MAR-4000-0048
Revision List
6143-MAR-CU-0048
DISCIPLINE
CIVIL
MAR No. 6143‐MAR‐CU‐0048
INDEX
Purpose of Use (Location, Area): Sikadur – 31 CF Slow is a moisture tolerant, thixotropic, structural 2‐component
adhesive and repair mortar, based on epoxy resins and special fillers for use at higher temperatures between 25’C and
45’C.
Manufacture & Country/Origin : Supplier & Country :
SIKA LLC UAE SIKA LLC UAE
Attachments:
Technical Information Yes/NA Ref Others Information Yes/NA Ref
* Compliance Statement NA 2.1 * Membership Certificate NA 3.1
* Project Spec./Codes & Standards NA 2.2 * Commercial License Yes 3.2
* Product Catalogue/Technical Data Yes 2.3 * Quality Certificate Yes 3.3
* Material Safety Data Sheet Yes 2.4 * Company Profile Yes 3.4
* Test Reports Yes 2.5 * Previous Approvals Yes 3.5
* Manufacturer's Recommendation NA 2.6 * List of Projects NA 3.6
* Mockup Sample NA 2.7 * Registration With ADNOC NA 3.7
* Drawing Yes 2.8 * Others (Specify) NA 3.8
Note/Comments:
PRODUCT INFORMATION
Composition Epoxy resin
Packaging Component A: Component B: A+B set
4 kg 2 kg 6 kg
8 kg 4 kg 12 kg
1/4
Shelf life 24 months from date of production
Storage conditions Store in original, unopened, sealed and undamaged packaging in dry condi-
tions at temperatures between +5 °C and +30 °C. Protect from direct sun-
light.
Density 1.93 ± 0.1 kg/l (component A + B mixed) (+23 °C) (evacuated)
TECHNICAL INFORMATION
Compressive strength Curing time Curing temperature (DIN EN 196)
+25 °C +35 °C +45 °C
1d ~30 N/mm2 ~45 N/mm2 ~48 N/mm2
3d ~47 N/mm2 ~49 N/mm2 ~54 N/mm2
7d ~52 N/mm2 ~54 N/mm2 ~57 N/mm2
Modulus of Elasticity in Compression ~2 600 N/mm2 (14 d / +23 °C) (ASTM D 695)
Modulus of Elasticity in Tension ~3 000 N/mm2 (14 d / +23 °C) (ISO 527)
Tensile Adhesion Strength Curing time Substrate Curing tem- Adhesion (EN ISO 4624, EN
perature strength 1542, EN 12188)
7d Concrete dry +35 °C > 4 N/mm2 *
7d Concrete +25 °C > 4 N/mm2 *
moist
7d Concrete +35 °C > 4 N/mm2 *
moist
7d Steel +25 °C ~15 N/mm2
7d Steel +35 °C ~14 N/mm2
7d Steel +50 °C ~14 N/mm2
*100 % concrete failure
Heat Deflection Temperature Curing time Curing temperat- HDT (ISO 75)
ure
7d +35 °C +50 °C
(thickness 10 mm)
2/4
APPLICATION INFORMATION
Mixing Ratio Component A : Component B = 2 : 1 (by weight)
Consumption ~1.9 kg/m2 per mm of thickness.
Layer Thickness 30 mm maximum.
When using multiple units, one after the other. Do not mix the following
unit until the previous one has been used in order to avoid a reduction in
handling time.
Sag Flow On vertical surfaces it is non-sag up to 15 mm thickness. (EN 1799)
Product Temperature Sikadur®-31 CF Slow can be applied at temperatures between +25 °C and
+45 °C.
Ambient Air Temperature +25 °C min. / +45 °C max.
Dew Point Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew
point.
Substrate Temperature +25 °C min. / +45 °C max.
Substrate Moisture Content Substrate must be dry or mat damp (no standing water)
Brush the adhesive well into the substrate
Pot Life Temperature Potlife* Open time (EN ISO 9514)
+25 °C ~120 min —
+35 °C ~70 min —
+45 °C ~45 min ~60 min
*200 g
The potlife begins when the resin and hardener are mixed. It is shorter at high temperatures and longer at
low temperatures. The greater the quantity mixed, the shorter the potlife. To obtain longer workability at
high temperatures, the mixed adhesive may be divided into portions. Another method is to chill compon-
ents A and B before mixing them (not below +5 °C).
3/4
CLEANING OF EQUIPMENT LEGAL NOTES
Clean all tools and application equipment with Sika®
Colma Cleaner immediately after use. Hardened / The information, and, in particular, the recommenda-
cured material can only be mechanically removed. tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
IMPORTANT CONSIDERATIONS properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
Sikadur® resins are formulated to have low creep un-
tions. In practice, the differences in materials, sub-
der permanent loading. However due to the creep be-
strates and actual site conditions are such that no war-
haviour of all polymer materials under load, the long
ranty in respect of merchantability or of fitness for a
term structural design load must account for creep.
particular purpose, nor any liability arising out of any
Generally the long term structural design load must be
legal relationship whatsoever, can be inferred either
lower than 20 to 25 % of the failure load.
from this information, or from any written recom-
A structural engineer must be consulted for load cal-
mendations, or from any other advice offered. The
culations for the specific application.
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
BASIS OF PRODUCT DATA serves the right to change the properties of its
products. The proprietary rights of third parties must
All technical data stated in this Data Sheet are based be observed. All orders are accepted subject to our
on laboratory tests. Actual measured data may vary current terms of sale and delivery. Users must always
due to circumstances beyond our control. refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
LOCAL RESTRICTIONS will be supplied on request.
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
uses.
Sikadur-31CFSlow-en-AE-(06-2020)-1-2.pdf
Product Data Sheet
Sikadur®-31 CF Slow
June 2020, Version 01.02
020204030010000041
4/4
WASTE HEAT RECOVERY PROJECT
(WHRP)
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use : Adhesive
1.3 Details of the supplier of the safety data sheet
Company name of supplier : Sika UAE LLC
Plot 61 (533-279), Dubai Industrial City (DIC),
Saih Shuaib 4 (533), P.O.Box 126212 - Dubai UAE
Telephone : +971 4 4398200
Telefax : +971 4 4393606
E-mail address of person : EHS@ae.sika.com
responsible for the SDS
1.4 Emergency telephone number
+971 563 982 705
3.2 Mixtures
Hazardous components
Chemical name CAS-No. Classification Concentration
EC-No. (REGULATION (% w/w)
Registration number (EC) No
1272/2008)
bis-[4-(2,3- 1675-54-3 Skin Irrit.2; H315 >= 20 - < 25
epoxipropoxi)phenyl]propane 216-823-5 Eye Irrit.2; H319
01-2119456619-26- Skin Sens.1; H317
XXXX Aquatic Chronic2;
H411
oxirane, mono[(C12-14- 68609-97-2 Skin Irrit.2; H315 >= 1 - < 2,5
alkyloxy)methyl] derivs. 271-846-8 Skin Sens.1; H317
01-2119485289-22-
XXXX
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms : Allergic reactions
Excessive lachrymation
Erythema
Dermatitis
See Section 11 for more detailed information on health effects
and symptoms.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment : Treat symptomatically.
Country 100000006826 3 / 12
SAFETY DATA SHEET
Hygiene measures : Handle in accordance with good industrial hygiene and safety
practice. When using do not eat or drink. When using do not
smoke. Wash hands before breaks and at the end of workday.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage : Keep container tightly closed in a dry and well-ventilated
areas and containers place. Store in accordance with local regulations.
Country 100000006826 4 / 12
SAFETY DATA SHEET
Engineering measures
Maintain air concentrations below occupational exposure standards.
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
Eye protection : Safety glasses with side-shields conforming to EN166
Eye wash bottle with pure water
Skin and body protection : Protective clothing (e.g. Safety shoes acc. to EN ISO 20345,
long-sleeved working clothing, long trousers). Rubber aprons
and protective boots are additionaly recommended for mixing
and stirring work.
Country 100000006826 5 / 12
SAFETY DATA SHEET
No data available
pH : Not applicable
substance/mixture is non-soluble (in water)
Viscosity
Viscosity, kinematic : > 20,5 mm2/s (40 °C)
Solubility(ies)
Water solubility : insoluble
10.1 Reactivity
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
The product is chemically stable.
10.3 Possibility of hazardous reactions
Country 100000006826 6 / 12
SAFETY DATA SHEET
Acute toxicity
Not classified based on available information.
Components:
bis-[4-(2,3-epoxipropoxi)phenyl]propane:
Acute oral toxicity : LD50 Oral (Rat): > 5.000 mg/kg
(1-methylethyl)-1,1'-biphenyl:
Acute oral toxicity : LD50 Oral (Rat): 4.650 mg/kg
Method: OECD Test Guideline 401
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitisation
Skin sensitisation: May cause an allergic skin reaction.
Respiratory sensitisation: Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT - single exposure
Not classified based on available information.
Country 100000006826 7 / 12
SAFETY DATA SHEET
12.1 Toxicity
Components:
bis-[4-(2,3-epoxipropoxi)phenyl]propane:
Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 2 mg/l
Exposure time: 96 h
Toxicity to daphnia and other : EC50 (Daphnia magna (Water flea)): 1,8 mg/l
aquatic invertebrates Exposure time: 48 h
(1-methylethyl)-1,1'-biphenyl:
Toxicity to daphnia and other : LC50 (Daphnia magna (Water flea)): 0,167 mg/l
aquatic invertebrates Exposure time: 48 h
Product:
Assessment : This substance/mixture contains no components considered
to be either persistent, bioaccumulative and toxic (PBT), or
very persistent and very bioaccumulative (vPvB) at levels of
0.1% or higher.
Product:
Endocrine disrupting poten- : The substance/mixture does not contain components consid-
tial ered to have endocrine disrupting properties according to
REACH Article 57(f) or Commission Delegated regulation
(EU) 2017/2100 or Commission Regulation (EU) 2018/605 at
levels of 0.1% or higher.
Additional ecological infor- : An environmental hazard cannot be excluded in the event of
mation unprofessional handling or disposal.
Harmful to aquatic life with long lasting effects.
Country 100000006826 8 / 12
SAFETY DATA SHEET
European Waste Catalogue : 08 04 09* waste adhesives and sealants containing organic
solvents or other dangerous substances
14.1 UN number
ADR : UN 3077
IMDG : UN 3077
IATA : UN 3077
14.2 UN proper shipping name
ADR : 9
IMDG : 9
IATA : 9
14.4 Packing group
Country 100000006826 9 / 12
SAFETY DATA SHEET
ADR
Packing group : III
Classification Code : M7
Hazard Identification Number : 90
Labels : 9
Tunnel restriction code : (-)
Remarks : Transport in accordance with special provision 375
IMDG
Packing group : III
Labels : 9
EmS Code : F-A, S-F
Remarks : Transport in accordance with 2.10.2.7 of the IMDG-Code
IATA (Cargo)
Packing instruction (cargo : 956
aircraft)
Packing instruction (LQ) : Y956
Packing group : III
Labels : Miscellaneous
Remarks : Transport in accordance with special regulation A 197
IATA (Passenger)
Packing instruction (passen- : 956
ger aircraft)
Packing instruction (LQ) : Y956
Packing group : III
Labels : Miscellaneous
14.5 Environmental hazards
ADR
Environmentally hazardous : yes
IMDG
Marine pollutant : yes
IATA (Passenger)
Environmentally hazardous : yes
IATA (Cargo)
Environmentally hazardous : yes
14.6 Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely
based upon the properties of the unpackaged material as it is described within this Safety Data
Sheet. Transportation classifications may vary by mode of transportation, package sizes, and var-
iations in regional or country regulations.
14.7 Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable for product as supplied.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
REACH - Restrictions on the manufacture, placing on : Conditions of restriction for the fol-
Country 100000006826 10 / 12
SAFETY DATA SHEET
the market and use of certain dangerous substances, lowing entries should be considered:
mixtures and articles (Annex XVII) Number on list 3
REACH - Candidate List of Substances of Very High : None of the components are listed
Concern for Authorisation (Article 59). (=> 0.1 %).
REACH - List of substances subject to authorisation : Not applicable
(Annex XIV)
Regulation (EC) No 1005/2009 on substances that de- : Not applicable
plete the ozone layer
Regulation (EU) 2019/1021 on persistent organic pollu- : Not applicable
tants (recast)
Regulation (EC) No 649/2012 of the European Parlia- : Not applicable
ment and the Council concerning the export and import
of dangerous chemicals
REACH Information: All substances contained in our Products are
- registered by our upstream suppliers, and/or
- registered by us, and/or
- excluded from the regulation, and/or
- exempted from the registration.
Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of
major-accident hazards involving dangerous substances.
Not applicable
Volatile organic compounds : Law on the incentive tax for volatile organic compounds
(VOCV)
Volatile organic compounds (VOC) content: 0,01% w/w
no VOC duties
Other regulations:
Take note of Directive 92/85/EEC regarding maternity protection or stricter national regulations,
where applicable.
15.2 Chemical safety assessment
No Chemical Safety Assessment has been carried out for this mixture by the supplier.
The information contained in this Safety Data Sheet corresponds to our level of knowledge at the
time of publication. All warranties are excluded. Our most current General Sales Conditions shall
apply. Please consult the product data sheet prior to any use and processing.
AE / EN
Country 100000006826 12 / 12
SAFETY DATA SHEET
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use : Adhesive, Mortar, Product is not intended for consumer use
1.3 Details of the supplier of the safety data sheet
Company name of supplier : Sika UAE LLC
Plot 61 (533-279), Dubai Industrial City (DIC),
Saih Shuaib 4 (533), P.O.Box 126212 - Dubai UAE
Telephone : +971 4 4398200
Telefax : +971 4 4393606
E-mail address of person : EHS@ae.sika.com
responsible for the SDS
1.4 Emergency telephone number
+971 563 982 705
Hazard statements : H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting ef-
fects.
3.2 Mixtures
Hazardous components
Chemical name CAS-No. Classification Concentration
EC-No. (REGULATION (% w/w)
Registration number (EC) No
1272/2008)
(1-methylethyl)-1,1'-biphenyl 25640-78-2 Eye Irrit.2; H319 >= 10 - < 20
Contains: 247-156-8 Asp. Tox.1; H304
diisopropyl-1,1'-biphenyl >= 9,9 % 01-2119982993-17- Aquatic Acute1;
XXXX H400
Aquatic Chronic2;
H411
3-aminomethyl-3,5,5- 2855-13-2 Acute Tox.4; H302 >= 3 - < 5
trimethylcyclohexylamine 220-666-8 Skin Corr.1B; H314
01-2119514687-32- Eye Dam.1; H318
XXXX Skin Sens.1A;
H317
Amines, polyethylenepoly-, triethyl- 90640-67-8 Acute Tox.4; H302 >= 3 - < 5
enetetramine fraction 292-588-2 Acute Tox.4; H312
Contains: 01-2119487919-13- Skin Corr.1B; H314
2-(2-aminoethylamino)ethanol <= 0,3 XXXX Skin Sens.1; H317
% Aquatic Chronic3;
H412
benzyl alcohol 100-51-6 Acute Tox.4; H302 >= 1 - < 2,5
202-859-9 Acute Tox.4; H332
01-2119492630-38- Eye Irrit.2; H319
Country AE 100000006827 2 / 14
SAFETY DATA SHEET
XXXX
Adduct IA (epoxy amine adduct) 68609-08-5 Acute Tox.4; H302 >= 1 - < 2,5
Skin Sens.1; H317
01-2120106013-80- Aquatic Chronic2;
XXXX H411
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with difficul-
ty.
In case of eye contact : Small amounts splashed into eyes can cause irreversible tis-
sue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Keep eye wide open while rinsing.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms : Allergic reactions
Dermatitis
See Section 11 for more detailed information on health effects
and symptoms.
Country AE 100000006827 3 / 14
SAFETY DATA SHEET
4.3 Indication of any immediate medical attention and special treatment needed
Treatment : Treat symptomatically.
Hygiene measures : Handle in accordance with good industrial hygiene and safety
practice. When using do not eat or drink. When using do not
smoke. Wash hands before breaks and at the end of workday.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage : Keep container tightly closed in a dry and well-ventilated
areas and containers place. Store in accordance with local regulations.
Engineering measures
Maintain air concentrations below occupational exposure standards.
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
Eye protection : Safety glasses with side-shields conforming to EN166
Eye wash bottle with pure water
Wear eye/face protection.
Skin and body protection : Protective clothing (e.g. Safety shoes acc. to EN ISO 20345,
long-sleeved working clothing, long trousers). Rubber aprons
and protective boots are additionaly recommended for mixing
and stirring work.
No data available
Viscosity
Viscosity, kinematic : > 20,5 mm2/s (40 °C)
Solubility(ies)
Water solubility : insoluble
10.1 Reactivity
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
The product is chemically stable.
10.3 Possibility of hazardous reactions
Hazardous reactions : Stable under recommended storage conditions.
Acute toxicity
Not classified based on available information.
Components:
(1-methylethyl)-1,1'-biphenyl:
Acute oral toxicity : LD50 Oral (Rat): 4.650 mg/kg
Method: OECD Test Guideline 401
3-aminomethyl-3,5,5-trimethylcyclohexylamine:
Acute oral toxicity : Acute toxicity estimate: 1.030 mg/kg
Method: Acute toxicity estimate according to Regulation (EC)
No. 1272/2008
benzyl alcohol:
Acute oral toxicity : LD50 Oral (Rat): 1.620 mg/kg
Skin corrosion/irritation
Causes severe burns.
Serious eye damage/eye irritation
Causes serious eye damage.
Respiratory or skin sensitisation
Skin sensitisation: May cause an allergic skin reaction.
Respiratory sensitisation: Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT - single exposure
Not classified based on available information.
STOT - repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Country AE 100000006827 8 / 14
SAFETY DATA SHEET
12.1 Toxicity
Components:
(1-methylethyl)-1,1'-biphenyl:
Toxicity to daphnia and other : LC50 (Daphnia magna (Water flea)): 0,167 mg/l
aquatic invertebrates Exposure time: 48 h
3-aminomethyl-3,5,5-trimethylcyclohexylamine:
Toxicity to algae : ErC50 (Desmodesmus subspicatus (green algae)): > 10 - 100
mg/l
Exposure time: 72 h
benzyl alcohol:
Toxicity to fish : LC50 (Fish): > 100 mg/l
Exposure time: 96 h
Toxicity to daphnia and other : EC50 (Daphnia magna (Water flea)): > 100 mg/l
aquatic invertebrates Exposure time: 48 h
Product:
Assessment : This substance/mixture contains no components considered
to be either persistent, bioaccumulative and toxic (PBT), or
very persistent and very bioaccumulative (vPvB) at levels of
0.1% or higher.
Country AE 100000006827 9 / 14
SAFETY DATA SHEET
Product:
Endocrine disrupting poten- : The substance/mixture does not contain components consid-
tial ered to have endocrine disrupting properties according to
REACH Article 57(f) or Commission Delegated regulation
(EU) 2017/2100 or Commission Regulation (EU) 2018/605 at
levels of 0.1% or higher.
Additional ecological infor- : An environmental hazard cannot be excluded in the event of
mation unprofessional handling or disposal.
Harmful to aquatic life with long lasting effects.
European Waste Catalogue : 08 04 09* waste adhesives and sealants containing organic
solvents or other dangerous substances
14.1 UN number
ADR : UN 1759
IMDG : UN 1759
IATA : UN 1759
14.2 UN proper shipping name
Country AE 100000006827 10 / 14
SAFETY DATA SHEET
ADR : 8
IMDG : 8
IATA : 8
14.4 Packing group
ADR
Packing group : III
Classification Code : C10
Hazard Identification Number : 80
Labels : 8
Tunnel restriction code : (E)
IMDG
Packing group : III
Labels : 8
EmS Code : F-A, S-B
Remarks : Alkalis
IATA (Cargo)
Packing instruction (cargo : 864
aircraft)
Packing instruction (LQ) : Y845
Packing group : III
Labels : Corrosive
IATA (Passenger)
Packing instruction (passen- : 860
ger aircraft)
Packing instruction (LQ) : Y845
Packing group : III
Labels : Corrosive
14.5 Environmental hazards
ADR
Environmentally hazardous : no
IMDG
Marine pollutant : no
IATA (Passenger)
Environmentally hazardous : no
IATA (Cargo)
Environmentally hazardous : no
Country AE 100000006827 11 / 14
SAFETY DATA SHEET
15.1 Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
REACH - Restrictions on the manufacture, placing on : Conditions of restriction for the fol-
the market and use of certain dangerous substances, lowing entries should be considered:
mixtures and articles (Annex XVII) Number on list 3
REACH - Candidate List of Substances of Very High : None of the components are listed
Concern for Authorisation (Article 59). (=> 0.1 %).
REACH - List of substances subject to authorisation : Not applicable
(Annex XIV)
Regulation (EC) No 1005/2009 on substances that de- : Not applicable
plete the ozone layer
Regulation (EU) 2019/1021 on persistent organic pollu- : Not applicable
tants (recast)
Regulation (EC) No 649/2012 of the European Parlia- : Not applicable
ment and the Council concerning the export and import
of dangerous chemicals
REACH Information: All substances contained in our Products are
- registered by our upstream suppliers, and/or
- registered by us, and/or
- excluded from the regulation, and/or
- exempted from the registration.
Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of
major-accident hazards involving dangerous substances.
Not applicable
Volatile organic compounds : Law on the incentive tax for volatile organic compounds
(VOCV)
Volatile organic compounds (VOC) content: 2,24% w/w
no VOC duties
Country AE 100000006827 12 / 14
SAFETY DATA SHEET
Country AE 100000006827 13 / 14
SAFETY DATA SHEET
The information contained in this Safety Data Sheet corresponds to our level of knowledge at the
time of publication. All warranties are excluded. Our most current General Sales Conditions shall
apply. Please consult the product data sheet prior to any use and processing.
AE / EN
Country AE 100000006827 14 / 14
WASTE HEAT RECOVERY PROJECT
(WHRP)
2.6) Manufacturer’s
Recommendation (N/A)
WASTE HEAT RECOVERY PROJECT
(WHRP)
2.8) Drawing
52
0 0.5 1 2 3 6
www.adbc.gov.ae ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺍﻟﺮﺧﺼﺔ ﺑﺮﺟﺎﺀ ﺯﻳﺎﺭﺓ ﺍﻟﻤﻮﻗﻊ. ﺃﺑﻮﻇﺒﻲ- ﻭﺛﻴﻘﺔ ﻣﻌﺘﻤﺪﺓ ﻭﺻﺎﺩﺭﺓ ﺑﺪﻭﻥ ﺗﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ ﻣﻦ ﺩﺍﺋﺮﺓ ﺍﻟﺘﻨﻤﻴﺔ ﺍﻹﻗﺘﺼﺎﺩﻳﺔ
Approved document issued without signature or stamp by the Department of Economic Development - Abu Dhabi. To verify the license kindly
visit www.adbc.gov.ae
Official Email : elkhawas.ahmed@ae.sika.com : ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﺍﻟﺮﺳﻤﻲ
Official Mobile : +971504521726 : ﺭﻗﻢ ﺍﻟﺘﻮﺍﺻﻞ ﺍﻟﺮﺳﻤﻲ
*CN-1440771*
www.adbc.gov.ae
WASTE HEAT RECOVERY PROJECT
(WHRP)
Certificate of Approval
This is to certify that the Management System of:
This certificate forms part of the approval identified by approval number: 0045885/ 0045886/ 0045887
Luis Cunha
Area Operations Manager - SAMEA
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance Limited, Dubai, Festival Office Tower, Suite 2001, Dubai Festival City, Dubai for and on behalf of: Lloyd's Register Quality
Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
WASTE HEAT RECOVERY PROJECT
(WHRP)
OUR STRATEGY
The Sika growth model is synonymous with long-term
success, as well as sustainable and profitable growth. By
targeting the strategic pillars of market penetration, innova-
tion, operational efficiency, acquisitions, sustainability - and
driven by its strong corporate values - Sika is growing
successfully.
WHAT WE DO
BUILDING TRUST TARGET MARKETS
Trust is the foundation of our partnerships and collaborations. Sika provides one of the most comprehensive sets of
For us it is demonstrated in the quality of our work, and is the solutions dedicated to:
result of our innovative power and perseverance. However, it is
not a static state, but a continuous process that needs to be
actively cultivated. The Sika brand exists because every day we
continuously invest in building trust.
SIKA AT A GLANCE
FLOORING SEALING & BONDING
25,000 + TEAM MEMBERS
100 COUNTRIES
300 + FACTORIES WORLDWIDE
8.1 Billion CHF NET SALES
REFURBISHMENT INDUSTRY
ALNG-CON17-049-TR-10026 Page 1 of 1
TRANSMITTAL
CONTRACTOR TRT-CON17-049-TR-
Date: 6 April 2021
Transmittal Ref.: 09443
Pablo G. Vicioso Romesh Kumar
Project Director PMC Project Manager
To: From:
María de Portugal 9-11 ADNOC LNG, Abu Dhabi,
28050 - Madrid (Spain) U.A.E.
Subject: CIVIL & STRUCTURAL - MATERIAL APPROVAL REQUESTS
LIST OF CONTENTS
Approval
Document Number Rev. Title
Code
Approval shall NOT relieve contractor from its obligation, warranties, guarantees, and liabilities.
Remarks (if any): For ADNOC LNG:
CONTRACTOR Transmittal
TRT-CON17-049-TR-09443 Document Class: Class 2 Approval Code: Code 3, Approved
Ref.: