Spec Prob Set 315 Current
Spec Prob Set 315 Current
Spec Prob Set 315 Current
PROBLEM SET
All Sections
CHEMISTRY 315
IR, MS, UV SPECTROSCOPY PROBLEM SET
Consult the Lab Manual, the textbooks by Solomons and by Pavia, et al., and the following
discussion to help you with the analyses.
In the Lab Manual section, Spectroscopy I, there is a section titled "Using On-line Databases
to Help Solve Organic Chemistry Spectroscopy Problems". You should review it so you can
use on-line sources to help you analyze some of the problem spectra and as a source for
literature spectra. The GMU Organic Chemistry web page
(http://mason.gmu.edu/~sslayden/Lab/index.html) has links to the databases. You really will
find this material easier to master if you take the logical approach outlined in the manual and
in Pavia.
If you are unfamiliar with a compound's name, look it up on-line, or in the textbook, Merck,
CRC, or Aldrich catalog. The Lab Manual has a list of reference sources in the section
"Finding and Citing Information for the Laboratory".
1. a) For each of the compounds below, first write a structural formula and then indicate
which of them is likely to absorb in the UV region. Briefly explain your reasoning.
A. cyclohexanol
B. 2,4-hexadienal
C. 2-methyl-5-vinylpyridine
Indicate the approximate wavenumbers of the IR absorption peaks that could be used to
distinguish between the members of each of the pairs of compounds in a row. Mention at least
one distinguishing absorption peak for each compound in the pair that is absent in the
spectrum of the other compound (except for the compound in the lower right box).
Example:
B. 1-pentyne 1,3-pentadiene
C. pentanal 2-pentanone
2. Shown on the next page are the IR spectra of the four isomeric butyl chlorides. The spectra
are clearly different, as are their structures. Focus on two of the absorption regions in the
spectra: ~1380 cm-1 and ~525 cm-1. Notice the variability in intensity and appearance of the
peaks in those two regions for the isomers. Mark these regions on the spectra on the next page.
a) For the two IR spectra below, specify in the white space on the spectra, whether they
contain an n-butyl, sec-butyl, isobutyl, or tert-butyl group. Circle the peaks that justify your
choices using the spectra on the next page for comparison. Remember to compare the two
important absorption regions specified above.
b) Which of these two spectra is of an aromatic compound? Mark the peaks that justify your
choice. Put all your answers on this page.
3. Go to the NIST web site (http://webbook.nist.gov/chemistry/) and find the mass spectrum
for 2-bromobutane.
To print the mass spectrum, scroll down and click on “View image of digitized spectrum (can
be printed in landscape orientation)”.
Change the page orientation to “Landscape” in the File | Print…| Properties window. If you
get an error message, reload the page and try to print again.
Calculate the molecular weight of 2-bromobutane to guide you where to look for the highest
mass peaks. Remember, the mass spectrum itself will show only the integral mass, not the
molecular weight, which is an average of all the atomic isotopes present in the sample.
Before you leave the website, make sure you write on the printed copy the mass numbers of
the peaks of highest M/z (they may be very small) and several other peaks. It is easier to see
them on the monitor screen than on a black and white printout.
a) On the printed spectrum of 2-bromobutane, indicate the two isotopic molecular ion peaks
and their M/z ratios (refer back to the discussion in the lab manual on MS).
b) On the printed spectrum of 2-bromobutane, indicate the M/z for the peak of greatest
intensity. What fragmentation of the 2-bromobutane accounts for its presence? Draw the
structure of the charged fragment.
Part II: Each Combined Spectra Problem on the following pages contains some combination
of this information: IR spectrum, mass spectrum or molecular ion peak, major UV peak,
element % mass. On each spectrum, neatly label the major absorption peaks with the structural
fragment that causes the absorption. On the answer sheet that follows each problem, fill in the
requested information so that you assemble all the structural information that can be obtained
from the spectra. Then, using this information, propose the structure and identity of the
compound. A logical analysis of the data to support the identification should be written in the
"Combined Analysis" section. You can confirm the identity from literature or on-line sources.
A completed example is given.
Example Spectra Problem – The spectra here have been marked to indicate major
absorptions. Other answers are entered on the next page.
Answer to Example Problem
Mass Spectrum Analysis:
The integral molecular weight of the unknown is 88. Because this is an even number, the
compound has either no nitrogen atoms or an even number of N atoms. The highest m/z peaks
do not show evidence of the presence of atoms such as Cl or Br (which would have two peaks
in 75:25 and 50:50 ratios, respectively).
Elemental Analysis:
None was given.
UV-visible Analysis:
No information was given.
IR Analysis:
The absorption at 3000 cm–1 (and not to the left) shows only aliphatic (saturated) C–H groups.
The carbonyl, C=O, absorbs strongly at 1740 cm–1. The two intense peaks between 1000-1300
cm–1 indicate the carbonyl belongs to the ester group. The C=O absorption is within the range
for an ester group.
Combined Analysis:
The IR shows the only functional group present is an ester. There is no aromaticity or other
unsaturation in the molecule (except for the C=O). The ester group accounts for 44 amu of the
88 integral mass. The remaining mass (88-44= 44) belongs to one or more hydrocarbon
groups. The basic structure must be R–(CO2)–R' where R could be a hydrogen bonded to the C
of the ester (but R' cannot be H, since the functional group would be a carboxylic acid, not an
ester).
Since the hydrocarbon group(s) must be saturated, there must be 3 carbons (36 amu) and 8
hydrogens (8 amu) = 44 amu. The molecular formula is thus C3H8O2. If R=H, then R'=
isopropyl or n-propyl. The two remaining possibilities are for R and R' to be methyl and ethyl
(or vice versa). [Note: A more detailed analysis of the fingerprint region would show this is
not either of the propyl formates. A more detailed analysis of the fragmentation in the mass
spectrum would also eliminate these.]
Entering the molecular formula into the search page of an on-line spectroscopy database, and
comparing the known spectra with the unknown's spectra matches only one of the
possibilities.
Elemental Analysis:
UV-visible Analysis:
IR Analysis:
Combined Analysis:
Elemental Analysis:
UV-visible Analysis:
IR Analysis:
Combined Analysis:
Elemental Analysis:
UV-visible Analysis:
IR Analysis:
Combined Analysis:
Elemental Analysis:
UV-visible Analysis:
IR Analysis:
Combined Analysis:
Elemental Analysis:
UV-visible Analysis:
IR Analysis:
Combined Analysis: