AP33AP32 Mist Installation Guide v13

AP33 and AP32 Hardware Installation Guide
Overview
The Mist AP33 and AP32 contains three IEEE 802.11ax radios that deliver up
to 4x4 MIMO with four spatial streams when operating in multi-user (MU) or
single-user (SU) mode.
1Juniper Business Use Only

AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
I/O ports
Reset Reset to the factory default settings
USB USB2.0 support interface
Eth1 10/100/1000BASE-T RJ45 interface
100/1000/2500BASE-T RJ45 interface that supports

Eth0+PoE
802.3at PoE PD

AP33/32 Mounting
In a wall mount installation, please use screws that have a 1/4in. (6.3mm) diameter head with a
length at least 2 in. (50.8mm).

The bracket attaches to a rod that is 5/8”-11.

The bracket attaches to a rod that is M16-2.

Technical Specifications:
Feature Description
Power options 802.3at/802.3af PoE
Dimensions 202mm x 202mm x 44mm (7.95in x 7.95in x 1.73in)

AP33: 0.88 kg (1.94 lbs)
Weight AP32: 0.79 kg (1.74 lbs)
AP32E: 0.81 kg (1.78 lbs)
AP33: -5° to 40° C
Operating
AP32: -5° to 40° C
temperature
AP32E: -5° to 40° C
Operating humidity 10% to 90% maximum relative humidity, non-condensing
Operating altitude 3,048m (10,000 ft)

1 – 100/1000/2500BASE-T auto-sensing RJ-45 with PoE
I/O 1 – 10/100/1000BASE-T auto-sensing RJ-45
1 – USB2.0
5GHz - 4x4:4SS 802.11ax MU-MIMO & SU-MIMO
2.4GHz – 2x2:2SS 802.11ax MU-MIMO & SU-MIMO
RF 2.4GHz / 5GHz scanning radio
AP33 - 2.4GHz BLE with Dynamic Antenna Array
AP32/AP32E - 2.4GHz BLE with Omni Antenna
Total maximum PHY rate – 2974 Mbps
Maximum PHY rate 5GHz – 2400 Mbps
2.4GHz – 574Mbps
Indicators Multi-color status LED
CAN/CSA-C22.2 No. 62368-1-14

UL 2043
FCC Part 15.247, 15.407, 15.107, and 15.109
Compliance standards
RSS-247
ICES-003 (Canada)
Suitable for use in environmental air space in accordance with Section 300-22(C) of the
National Electrical Code, and Sections 2-128, 12-010(3), and 12-100 of the Canadian
Electrical Code, Part 1, CSA C22.1.
Warning: The AP must be mounted only horizontally if you mount it into a plenum space.
Warranty Information
The AP33 or AP32 family of Access Points comes with a limited lifetime warranty.
Ordering Information:
Access Points
AP33-US 802.11ax WiFi and BLE Array AP - Internal Antenna for
the US Regulatory domain
AP33-WW 802.11ax WiFi and BLE Array AP – Internal Antenna for

the WW Regulatory domain
AP32-US 802.11ax WiFi and BLE AP – Internal Antenna for the US

Regulatory domain
AP32-WW 802.11ax WiFi and BLE AP – Internal Antenna for the

WW Regulatory domain
AP32E-US 802.11ax WiFi and BLE AP – External Antenna for the

US Regulatory domain
AP32E-WW 802.11ax WiFi and BLE AP – External Antenna for the

WW Regulatory domain

Mounting brackets
APBR-U Universal AP Bracket for T-Rail and Drywall mounting
for Indoor Access Points
APBR-T58 5/8-inch threaded rod bracket
APBR-M16 16mm threaded rod bracket
APBR-ADP-CR9 Adapter for channel rail and recessed 9/16” t-rail
APBR-ADP-RT15 Adapter for recessed 15/16" t-rail
APBR-ADP-WS15 Adapter for recessed 1.5" t-rail
APBR-ADP-T12 Adapter for 1/2-inch threaded rod
Regulatory Compliance Information:

This product and all interconnected equipment must be installed indoors within the same
building, including the associated LAN connections as defined by the 802.3at Standard.

Professional installation instructions
● Installation personnel – This product is designed for a specific application and needs
to be installed by qualified personnel who have RF and related rule knowledge. The
general user shall not attempt to install or change the settings.
● Installation location – The product shall be installed at a location where the radiating
antenna can be kept 44cm(FCC) or 48cm(IC) from nearby personnel in normal
operating conditions to meet the regulatory RF exposure requirement.
● External antenna – Use only an antenna which has been approved by Juniper. The
non-approved antenna(s) may produce unwanted spurious emissions or excessive RF
transmitting power which could violate the FCC limits.
● Installation procedure – Please refer to top section of this installation guide for
detailed instructions.
● Warning – Please carefully select the installation position and make sure that the
final output power does not exceed the limit set in the relevant rules. The violation
of the rule could lead to a federal penalty.
Instructions d'installation professionnelles

• Personnel d'installation - Ce produit est conçu pour une application spécifique et doit
être installé par du personnel qualifié ayant des connaissances en RF et en règles
associées. L'utilisateur général ne doit pas tenter d'installer ou de modifier les
paramètres.
• Emplacement d'installation - Le produit doit être installé à un endroit où l'antenne
rayonnante peut être maintenue à 44 cm (FCC) ou 48 cm (IC) du personnel à
proximité dans des conditions de fonctionnement normales pour répondre aux
exigences réglementaires d'exposition aux RF.
• Antenne externe - Utilisez uniquement une antenne approuvée par Juniper. Les
antennes non approuvées peuvent produire des émissions parasites indésirables ou
une puissance de transmission RF excessive qui pourraient enfreindre les limites de
la FCC.
• Procédure d'installation - Veuillez vous référer à la section supérieure de ce guide
d'installation pour des instructions détaillées.
• Avertissement - Veuillez sélectionner soigneusement la position d'installation et
assurez-vous que la puissance de sortie finale ne dépasse pas la limite définie dans
les règles pertinentes. La violation de la règle pourrait entraîner une sanction
fédérale.
If you need further assistance with purchasing the power source, please contact Juniper
Networks, Inc.

FCC Requirement for Operation in the United States of
America:
FCC Guideline for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 44
cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
● Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
● This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

Industry Canada
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1)
le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit
accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
This radio transmitter (IC: 22068-AP33 / Model: AP32E, AP32, AP33) has been approved
by ISED to operate with the antenna type listed below with maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 22068-AP33 / Model: AP32E, AP32, AP33) a été approuvé
par ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
Approved antenna(s) list:
Antenna Net Frequency Connector

Antenna No. Brand Model Antenna Type
Gain (dBi) range (GHz) Type
Ext WiFi Dual Acceltex ATS-OO-245-46- 4 2.4 – 2.484
6RPSP-36 Omnidirectional RPSMA Plug
Ant 6 5.15 – 5.85
Ext WiFi Dual Acceltex ATS-OP-245-810- 8 2.4 – 2.484
Directional RPSMA Plug
Ant 4RPSP-36 10 5.15 – 5.85
Int WiFi Dual 5 2.4 – 2.484
Omnidirectional N/A
Ant 6 5.15 – 5.85
Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 48
cm between the radiator & your body.

Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites
d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 48 cm de distance entre la
source de rayonnement et votre corps.
IC Caution
(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
(ii) The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be
such that the equipment still complies with the e.i.r.p. limits specified for point-to-point
and non-point-to-point operation as appropriate; and
(iv) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.
Avertissement
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions
précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5
350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5
850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à
point et l’exploitation non point à point, selon le cas;
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de
haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour
les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.

CE
This device complies with the Radio Equipment Directive, 2014/53/EU, issued by the
Commission of the European Community.
Hereby, Juniper Networks, Inc. declares that the radio equipment type (AP33, AP32, and
AP32E) are in compliance with Directive 2014/53/EU, Radio Equipment Regulations 2017.
The full text of the EU declaration of conformity is available at the following:
https://www.mist.com/support/
The frequency and maximum EIRP Power in EU:
Bluetooth:
Frequency range (MHz) Maximum EIRP in EU (dBm)
2400 – 2483.5 9.98
WLAN:
Frequency range (MHz) Maximum EIRP in EU (dBm)
2400 – 2483.5 19.99
5150 – 5250 22.93
5250 – 5350 22.90
5500 – 5700 29.99
5745 – 5825 13.96
The minimum distance between the user or bystander and the radiating structure of the
transmitter is 20cm.
The product is for use by authorized professionals and in environments where the product
has been assessed for safe and compliant operation. The installer is responsible for
ensuring that the equipment meets all local safety requirements for the installed location.
For products not certified for use in Hazardous Locations, the equipment is not suitable for
use in explosive environments, in the presence of flammable liquids, near explosives, or in
areas where blasting is occurring.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz
frequency range.
AT BE BG CZ DK EE FR DE IS
IE IT EL ES CY LV LI LT LU
HU MT NL NO PL PT RO SI SK
TR FI SE CH HR UK(NI)

Taiwan
警語內容
低功率電波輻射性電機管理辦法
第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用
，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Morocco
South Korea
해당 무선설비는 운용 중 전파혼신 가능성이 있음
Belarus

Oman
Thailand
• ่
เครืองโทรคมนาคมและอุ ้ ความสอดคล ้องตามมาตรฐานหรือข ้อกําหนดทางเทคนิ คของ กสทช.
ปกรณ์นีมี
Mexico
• La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada
• Este equipo ha sido diseñado para operar con las antenas que enseguida se enlistan
y para una ganancia máxima de antena de [8dBi por 2.4GHz y 10dBi por 5GHz]. El
uso con este equipo de antenas no incluidas en esta lista o que tengan una ganancia
mayor que [8dBi por 2.4GHz y 10dBi por 5GHz] quedan prohibidas. La impedancia
requerida de la antena es de [50] ohms

Ukraine
Brazil
• Este equipamento não tem direito a proteção contra interferência prejudicial e não
pode causar interferência em sistemas devidamente autorizados.
• Este produto não é apropriado para uso em ambientes domésticos, pois poderá
causar interferências eletromagnéticas que obrigam o usuário a tomar medidas
necessárias para minimizar estas interferências


AP33AP32 Mist Installation Guide v13

Uploaded by

Copyright:

Available Formats

AP33AP32 Mist Installation Guide v13

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AP33AP32 Mist Installation Guide v13

Uploaded by

Copyright:

Available Formats

AP33 and AP32 Hardware Installation Guide

1Juniper Business Use Only

Reset Reset to the factory default settings

USB USB2.0 support interface

Eth1 10/100/1000BASE-T RJ45 interface

100/1000/2500BASE-T RJ45 interface that supports

2Juniper Business Use Only

3Juniper Business Use Only

11Juniper Business Use Only

12Juniper Business Use Only

Dimensions 202mm x 202mm x 44mm (7.95in x 7.95in x 1.73in)

Operating altitude 3,048m (10,000 ft)

CAN/CSA-C22.2 No. 62368-1-14

AP33-WW 802.11ax WiFi and BLE Array AP – Internal Antenna for

AP32-US 802.11ax WiFi and BLE AP – Internal Antenna for the US

AP32-WW 802.11ax WiFi and BLE AP – Internal Antenna for the

AP32E-US 802.11ax WiFi and BLE AP – External Antenna for the

AP32E-WW 802.11ax WiFi and BLE AP – External Antenna for the

15Juniper Business Use Only

APBR-T58 5/8-inch threaded rod bracket

APBR-M16 16mm threaded rod bracket

APBR-ADP-CR9 Adapter for channel rail and recessed 9/16” t-rail

APBR-ADP-RT15 Adapter for recessed 15/16" t-rail

APBR-ADP-WS15 Adapter for recessed 1.5" t-rail

APBR-ADP-T12 Adapter for 1/2-inch threaded rod

Regulatory Compliance Information:

16Juniper Business Use Only

Instructions d'installation professionnelles

17Juniper Business Use Only

18Juniper Business Use Only

Approved antenna(s) list:

Antenna Net Frequency Connector

Radiation Exposure Statement:

19Juniper Business Use Only

20Juniper Business Use Only

The frequency and maximum EIRP Power in EU:

21Juniper Business Use Only

23Juniper Business Use Only

24Juniper Business Use Only

25Juniper Business Use Only

You might also like