BASF Additives Global Product Catalogue 2023
BASF Additives Global Product Catalogue 2023
BASF Additives Global Product Catalogue 2023
Your Formulations
BASF Performance and Formulation Additives
Jun 2023
Global Additives Webpage Contents
Lab Assistant....................................................... 4
Powering Up Your Formulations........................ 6
Sustainability....................................................... 8
Brands to power your brand............................ 10
Light Stabilizers................................................ 12
Technology highlights........................................................... 12
Technical information, features and benefits......................... 14
Antioxidants...................................................... 22
Technology highlights........................................................... 22
Technical information, features and benefits......................... 24
Dispersing Agents............................................. 28
Technology highlights........................................................... 28
Technical information, features and benefits......................... 30
Defoamers......................................................... 42
Technology highlights........................................................... 42
Technical information, features and benefits......................... 44
Rheology Modifiers........................................... 52
Technology highlights........................................................... 52
Technical information, features and benefits......................... 54
Film-Forming Agents........................................ 76
For more information about BASF’s Additives please visit the global webpage:
Technology highligts............................................................. 76
Technical information, features and benefits......................... 78
Index.................................................................. 88
2 3
Designed to simplify your lab life.
– Explore. Formulate. Collaborate.
4 5
Powering Up Your Formulations
6 7
Sustainability
Reliable information about the carbon footprint of your materials Sustainability Drivers in Additives
We have built an industry-leading certified digital solution to calculate product carbon footprints Zero pollution and health & safety as basic mechanism for products & technologies
Scope 3
Emissions caused by suppliers and generation of raw materials
If you want to learn more about Product Carbon Footprint calculation at BASF: If you want to learn more about Sustainability at BASF:
8 9
Irganox®
Tinuvin®
Hydropalat® Rheovis®
Foamaster®
10 11
Key benefits
12 13
Light stabilizers
Light stabilizers
Light Stabilizers
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Printing &
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Industrial
Sealants
Flooring
Weight (g/mol)
Tinuvin® 249-DW ECO N-R HALS Liquid, 40% active - 482 ■ ■ ■ ■ Non-basic HALS, no interaction with sensitive dispersions.
Lignin stabilizers
Lignostab® 1198 Activated HALS Solid 66-70 172 ■ ■ Lignin stabilizer for wood impregnation.
Recommended
Suitable
14 15
Light stabilizers
Light stabilizers
Light Stabilizers
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Printing &
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Industrial
Sealants
Flooring
Weight (g/mol)
Liquid, 95% in
Tinuvin 99-2 ®
2-methoxy-1-propyl - 452 ■ ■ ■ ■ UVA for medium performance coatings.
acetate
Tinuvin® 1130 Liquid - 637 & 975 ■ ■ ■ ■ ■ ■ UVA for medium performance coatings.
Recommended
Suitable
16 17
Light stabilizers
Light stabilizers
Light Stabilizers
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Printing &
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Industrial
Sealants
Flooring
Weight (g/mol)
Tinuvin® 770 DF (ED) N-H HALS Solid 81-85 480 ■ ■ ■ HALS suitable for powder coating applications.
Tinuvin® 5100 N-OR HALS Liquid - 737 ■ ■ ■ ■ ■ Non-basic HALS for oxidative curing coatings.
Recommended
Suitable
18 19
Light stabilizers
Light stabilizers
Light Stabilizers
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Printing &
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Industrial
Sealants
Flooring
Weight (g/mol)
Tinuvin® 5050 BTZ / N-R HALS Liquid - Mixture ■ ■ ■ ■ UVA / HALS blend for solvent-based applications.
Tinuvin® 5866 UVA / N-R HALS Solid - Mixture ■ ■ Stabilizer blend for adhesive and sealants applications.
Tinuvin® B 75 (ED) UVA / N-R HALS / AO Liquid - Mixture ■ ■ ■ Stabilizer blend for furniture and flooring applications.
Recommended
Suitable
20 21
Key benefits
Antioxidants and
• Improved sustainability (e.g. eco-labeling)
• Easy stir-in during processing
22 23
Antioxidants and Optical Brighteners
Antioxidants
Antioxidants
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Printing &
Industrial
Sealants
Weight (g/mol)
Flooring
Hindered phenolic (primary antioxidant)
AO for solvent-based and powder-coating applications, not to be used
Irganox® 245 (ED) Solid 76-79 587 ■ ■ ■ ■
in direct-fired gas ovens.
AO for water-based coating applications, not to be used in direct-fired
Irganox® 245 DW Liquid, 40% active - 587 ■ ■ ■
gas ovens.
AO for solvent-based and powder-coating applications, not to be used
Irganox® 1010 (ED) Solid 110-125 1,178 ■ ■ ■ ■
in direct-fired gas ovens.
AO for solvent-based coating applications, not to be used in direct-fired
Irganox® 1035 Phenol Solid 63-78 643 ■
gas ovens.
AO for 100% and solvent-based applications, not to be used in direct
Irganox® 1076 (ED) Solid 50-55 531 ■ ■ ■ ■
fired gas ovens.
AO for all solvent-based applications, not to be used in direct fired gas
Irganox® 1135 Liquid - 390 ■ ■ ■ ■
ovens.
Irganox® 1726 Solid 28 537 ■ AO for hot melt and rubber applications.
Recommended
Suitable
24 25
Antioxidants and Optical Brighteners
Antioxidants
Antioxidants
Technical information, features and benefits
Transportation
Automotive &
Architectural
Adhesives &
Molecular
Furniture &
Packaging
Product name Chemistry Physical Form Melting Point (°C) Features and benefits
Printing &
Industrial
Sealants
Weight (g/mol)
Flooring
Antioxidant blend
AO blend for powder-coating applications, not to be used in direct fired
Irganox® B 225 (ED) Solid >100 ■ ■ ■
gas ovens.
AO blend for powder-coating applications, not to be used in direct fired
Irganox® B 900 Phenol / phosphite Solid >50 ■ ■ ■
gas ovens.
Irgastab® Plus 5193 Solid 180-190 ■ ■ AO blend for adhesives and sealants applications.
Irgastab® Plus 5170 MG Phenol / thioether Solid 160-170 ■ ■ AO blend for adhesives and sealants applications.
Optical brightener
Water-based solution for white and pastel tone paints, clear coats,
Tinopal® NFW 10 LIQ Biphenyl-stilbene Liquid, 10% active - 563 ■ ■ ■ ■
overprint varnishes.
Solid optical brightener for solvent-based and 100% applications, white
Tinopal® OB CO Benzoxazole Solid 196-203 431 ■ ■ ■ ■
and pastel tone paints, clear coats, overprint varnishes.
Highly efficient water-soluble form, especially recommended to
Tinopal® SFP Triazine-stilbene Solid - 1,305 ■ ■ ■ ■
enhance brightness of pure white and pastel shades.
Recommended
Suitable
26 27
Key benefits
pigment concentrates. These polymeric, oligomeric enhancing color strength. Broad range of surfactant-type dispersants for water-based
Dispex® Ultra FA Low molecular weight systems, broad applicability, excellent compatibility, improvement of
and surfactant-based technologies are known for color acceptance.
outstanding color development, viscosity reduction, Our latest developments have focused on
Versatile, oligomeric dispersants allow for universal colorants and
enhanced gloss and stability as well as suitability for advancing water-based formulations with products Dispex® Ultra FA Oligomeric (FAME)
improvement of color acceptance.
low-VOC and APEO-free systems. like Dispex® Ultra PX 4290 and Dispex® Ultra CX
Established anionic dispersants for decorative paints and coatings,
4452. Improved durability or reduced total cost of Dispex® AA High molecular weight excellent in stabilizing inorganic pigments and fillers, high pigment
Drawing on in-depth knowledge of pigment chemistry, formulation can be achieved by using our Dispex® CX and filler loading possible, improved wet-scrub resistance with
hydrophobic types.
polymerization technology and formulations, our hydrophobic dispersants Dispex® CX 4248 and
experts will work with you to find the right dispersants Dispex® CX 4348. For solvent-based applications Broad range of high-performance dispersing agents, excellent
Dispex® Ultra PA Advanced high molecular
stabilization and color development, low pigment concentrate
to overcome challenges and achieve the properties Efka® PX 4787 provides optimal milling efficiency, Dispex® Ultra PX weight
viscosities.
you want in your coatings. which can support in reducing energy consumption.
A prime example of the advanced chemistry behind Talk to your partners at BASF Performance and
our dispersants is the award-winning controlled free- Formulation Additives for support in formulating Product range for
solvent-based systems Chemistry Characteristics
radical polymerization (CFRP) technology. It allows the and developing coatings – they can give you guide
(incl. 100% systems)
creation of highly efficient and widely compatible formulas for all dispersing additives in conjunction
Range of surfactant-type dispersants, broad applicability, excellent
block-copolymer dispersants that offer optimal with a variety of pigments. You can also find out Efka® FA Low molecular weight
anti-settling properties.
rheology control and improved coloristics. more about our dispersing agents here:
Dispex® Ultra FA Versatile, oligomeric dispersants allow for universal colorants and
www.basf.com/additives Oligomeric (FAME)
Efka® FA improvement of color acceptance.
The Efka® PX and Dispex® Ultra PX ranges comprise
Efka® PA Established range of high molecular-weight dispersants, excellent
our top-line dispersing agents. They are characterized High molecular weight
Efka® PU viscosity reduction and stabilization.
by a defined polymer architecture, which provides
high affinity for the pigment surface and robust
stabilization against flocculation. These additives help
to differentiate formulations with improved properties,
28 29
Dispersing agents
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
Anionic dispersing agents based on polyacrylic acid
Standard dispersing agent for inorganic fillers and pigments,
Dispex® AA 4030 30 <0.1 - - ■ ■ ■ ■ ■ ■ □ □ ■ ■
suitable for exterior applications.
Ammonium polyacrylate
Low polydispersity with higher efficiency for inorganic fillers and
Dispex® AA 4040 45 <0.1 - - ■ ■ ■ ■ ■ ■ □ ■ ■ ■
pigments, suitable for exterior coatings.
Dispex® AA 4135 35 <0.1 - - ■ ■ ■ ■ ■ ■ □ ■ Standard dispersing agent for inorganic fillers and pigments.
Low polydispersity for efficient dispersing properties and
Dispex® AA 4140 43 <0.1 - - ■ ■ ■ ■ ■ ■ □ ■ ■ ■
liquefying effect.
Low polydispersity for efficient dispersing properties and
Dispex® AA 4141 43 <0.1 - - ■ ■ ■ ■ ■ ■ □ ■
liquefying effect.
Sodium polyacrylate
Dispex® AA 4144 35 <0.3 - - ■ ■ ■ ■ ■ ■ □ ■ Efficient dispersing properties, excellent gloss development.
Dispex® CX 4340 40 <0.1 - - ■ ■ ■ ■ ■ ■ □ □ □ For inorganic pigments and extenders, balanced hydrophobicity.
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
Low molecular weight dispersing agents mainly for water-based systems
Anionic dispersing agent; excellent liquefying effect in inorganic
Dispex® Ultra FA 4404 Chelating agent 50 <0.1 - - ■ ■ ■ ■ ■ ■ ■ □
pigment slurry formulations.
Suitable for inorganic and organic pigments and pigment
Dispex® Ultra FA 4416 Surfactant mixture 75 <2 - - □ ■ ■ ■ ■ ■ ■ ■ □
concentrates.
Universal dispersing agent; also suitable as co-dispersant;
Dispex® Ultra FA 4420 100 <1 35 22 □ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■
Fatty acid modified improves compatibility and color acceptance in basepaints.
emulsifier (FAME) Dispersing agent for universal colorants for decorative tinting
Dispex® Ultra FA 4425 100 <1 47 46 □ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ □ □ ■
systems; excellent compatibility with aromatic-free alkyd paints.
Non-ionic fatty alcohol
Dispex® Ultra FA 4430 30 - - - □ ■ ■ ■ ■ ■ ■ Improves storage stability and compatibility of pigment pastes.
ethoxylate
Aliphatic polyether with Dispersing agent for inorganic pigments and fillers for decorative
Dispex® Ultra FA 4431 100 <0.1 - 100 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■ ■
acidic groups and industrial coatings.
Non-ionic dispersant for organic pigment concentrates, enhances
Dispex® Ultra FA 4437 Modified natural oil >99 <0.1 - - ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □
effect pigment orientation.
Universal non-ionic wetting and dispersing agent; APEO
Modified fatty alcohol
Dispex® Ultra FA 4480 80 <0.1 - - ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■ alternative for improved color acceptance, gloss and storage
ethoxylate
stability.
Anionic wetting and dispersing agent; especially suitable for
Dispex® Ultra FA 4483 Phosphoric acid ester 30 <0.1 - 25 ■ ■ ■ ■ ■ ■ ■ ■ □ ■
inorganic pigment concentrates.
Phosphoric acid ester, Neutralized anionic wetting and dispersing agent; especially
Dispex® Ultra FA 4484 26 <0.1 - - ■ ■ ■ ■ ■ ■ ■ ■ □
sodium salt suitable for universal inorganic pigment concentrates.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
32 33
Dispersing agents
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
Low molecular weight dispersing agents mainly for solvent-based systems
Surface active anionic Anti-settling agent for non-aqueous systems; provides good
Efka® FA 4600 35 27.5 - - ■ ■ ■ ■ □
compounds anti-settling properties in polar systems.
Anti-settling agent for non-aqueous systems; good anti-settling
Efka® FA 4601 Blend of fatty alcohol sulfates 47 16 - - ■ ■ ■ ■ □
properties for medium-polar systems.
Hydroxyl functional, For solvent-based decorative systems; from low to polar solvent
Efka® FA 4608 100 <1 85 - ■ ■ ■ ■ ■ ■ ■ ■
modified carboxylic acid containing systems.
Solution of a copolymer Excellent dispersant for inorganic pigments, especially TiO2;
Efka® FA 4609 52 48 - 50 ■ ■ ■ ■ □ ■ ■ ■ ■
with acidic groups strong reduction of mill base viscosity; increased hiding power.
Suitable for inorganic pigments in industrial coatings and
Efka® FA 4610 Acidic polyester polyamide 50 50 - 140 ■ ■ ■ □ ■ ■
dispersion of extenders and fillers in composites (SMC + BMC).
Solvent-free dispersing agent; strong reduction of mill base
Efka® FA 4611 Copolymer with acidic groups 100 <2.5 - 129 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
viscosity; high pigment and filler loading; increased hiding power.
Efficient dispersant for inorganic pigments; dispersion of extend-
Efka® FA 4620 Acidic polyether 100 <2.5 - 290 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
ers and fillers in composite formulations (SMC+BMC).
Unsaturated polyamide and For solvent-based and solvent-free systems; also effective for
Efka® FA 4644 52 48 16 25 □ ■ ■ ■ □ ■ ■ □ □ ■ ■
acid ester salts gelling bentonite concentrates.
Unsaturated fatty acid- Strong viscosity reduction for dispersing fillers in SMC, BMC and
Efka® FA 4647 80 20 30 40 □ ■ ■ ■ ■ □ ■
modified polyamide salts other filled and reinforced compounds.
Efka FA 4654 ®
Carboxylic acid salts 52 48 51 53 □ ■ ■ ■ ■ ■ □ ■ For low-polar to medium-polar systems; also for bentonite gels.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
34 35
Dispersing agents
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
High molecular weight dispersants
pH-independent with broad compatibility in water-based systems;
Dispex® Ultra PA 4550 50 <1 27 - □ ■ □ ■ ■ ■ ■ □ ■ ■ ■
good water resistance properties.
For water-based decorative and industrial coatings,
Dispex® Ultra PA 4560 Modified polyacrylate polymer 40 <1 25 - □ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ □
pH-independent; broad compatibility.
Suitable for stabilizing universal pigment concentrates for
Dispex® Ultra PA 4590 40 25 39 6 ■ ■ □ ■ □ ■ □ ■ ■ ■ □ ■
industrial coatings.
Specifically designed for semi-gloss and high-gloss paint
Dispex® Ultra PX 4275 37.5 <0.5 - - □ ■ ■ ■ ■ ■ ■ □ ■ ■ ■
formulations and pigment concentrates.
Copolymer Excellent for water-based universal colorants with broadest
Dispex® Ultra PX 4290 40 <0.1 - 9 ■ ■ ■ □ ■ □ ■ ■ ■ ■ ■ ■ ■ □ pigment affinity. Suitable for coatings, printing inks and
adhesives.
Excellent for inorganic pigments and transparent iron oxides;
Dispex® Ultra CX 4452 Anionic copolymer 40 <0.1 - - ■ ■ ■ □ ■ ■ ■ □ ■ ■ ■ □ □
strong viscosity reduction with low-foaming during milling.
Universal, non-ionic wetting and dispersing agent; improves gloss
Dispex® Ultra PX 4522 Non-ionic polymer 100 <0.1 - - ■ ■ ■ ■ ■ □ ■ □ □ □ ■
development, color strength and color acceptance.
Blend of amine- and Universal wetting and dispersing agent for organic and inorganic
Dispex® Ultra PX 4525 92 <1 16 33 ■ ■ ■ □ ■ ■ ■ □ ■ ■ □
acid-functional polymers pigments; improves color strength and color acceptance.
Excellent performance with inorganic pigments; broad
Dispex® Ultra PX 4575 40 <0.1 32 - □ ■ □ ■ □ ■ ■ ■ ■ ■ ■ ■ compatibility across binder systems; for colorants and co-
Acrylic block copolymer grinding.
(CFRP4) Best-in-class for high-jetness application and enhanced
Dispex Ultra PX 4585
®
50 <0.1 20 - ■ ■ □ ■ □ ■ ■ ■ ■ ■ ■ ■ coloristics for industrial and automotive coatings; broad binder
compatibility.
Specifically used in coil coating applications and polyester /
Efka® PA 4400 40 60 42 - □ ■ □ □ ■ ■ ■ ■
melamine stoving enamels.
Industrial coatings, automotive topcoats; for industrial colorants in
Efka® PA 4401 50 50 50 - □ ■ ■ ■ ■ ■ ■
combination with grinding resins such as Laropal® A81.
Modified polyacrylate polymer
For automotive OEM and refinish topcoats; also suitable for coil
Efka® PA 4404 40 60 36 - □ ■ □ □ ■ ■ ■ ■ ■
coating applications.
Efka® PA 4450 50 50 - 110 ■ ■ □ ■ ■ □ ■ ■ For organic and inorganic pigments in non-aqueous systems.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
36 37
Dispersing agents
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
High molecular weight dispersants
Efka® PU 4009 60 40 9 13 □ ■ ■ □ ■ ■ ■ ■ ■ □ □ ■ Suitable for general industrial application for optimum value in use.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
38 39
Dispersing agents
Dispersing agents
Dispersing Agents
Technical information, features and benefits
Recommended for
low VOC systems3
Organic pigments
General Industrial
VOC content (%)2
Resin-containing
Solvent-based
Carbon black
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Amine value
Solvent-free
Composites
Automotive
Solids (%)2
Acid value
Resin-free
Extenders
High molecular weight dispersants
High-end dispersing agent for solvent-based industrial coatings
Efka® PX 4300 80 20 56 - ■ ■ □ ■ ■ ■ ■ ■ □ ■ ■ ■
including medium- and long-oil alkyds.
Best-in-class for high-jetness application and enhanced coloristics
Efka® PX 4310 50 50 19 - ■ ■ □ ■ □ ■ ■ □ ■ ■
for industrial and automotive coatings; polar to mid-polar systems.
Delivers ultra-high jetness with carbon black and high transparency
Efka® PX 4320 50 50 28 - ■ ■ □ ■ ■ ■ ■ □ ■ ■ □
with organic pigments; suitable for mid-polar to non-polar systems.
For industrial and decorative coatings; industrial colorants in
Efka® PX 4330 70 30 28 - □ ■ ■ □ □ ■ ■ □ ■ ■ ■ ■ ■
Acrylic block copolymer combination with grinding resins such as Laropal® A81.
(CFRP4) For industrial and automotive systems; good performance in
Efka® PX 4340 55 45 4 - □ ■ □ ■ ■ ■ ■ ■ ■ ■
CAB-modified systems, 2-pack PUR and 2-pack epoxies.
Excellent gloss due to enhanced compatibility and improves
Efka® PX 4350 51 49 12 - □ ■ □ ■ ■ ■ □ ■ □ ■ ■
dispersion of Cu-Phthalocyanine pigments.
For high-performance pigments, suitable for energy-curable
Efka® PX 4701 100 <2.5 40 - ■ ■ □ ■ □ ■ ■ ■ ■ ■ ■ ■ ■
systems and solvent-based applications.
For UV-curable and mild-solvent ink-jet systems, including
Efka® PX 4703 100 <2.5 56 - ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■
UV-curable flexographic-, litho- and screen inks.
Suitable for energy-curable and solvent-based systems; broad
Efka® PX 4733 100 <2.5 25 - ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
pigment affinity, including matting agents.
Dispersing agent for high-quality solvent-based coatings; suitable
Efka® PX 4753 51 49 12 - ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■
for high-performance organic pigments.
Advanced polymer
Highly efficient, cross-linkable dispersing agent for excellent film
Efka® PX 4780 100 <2.5 20 - ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
properties; strong viscosity reduction during milling.
Highly efficient, cross-linkable dispersing agent for excellent film
Efka® PX 4787 70 30 15 - ■ ■ □ ■ ■ ■ □ ■ ■ ■ ■
properties; strong viscosity reduction during milling.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
40 41
Key benefits
Defoamers • Solutions for water-based and
non-aqueous formulations
• Improved sustainability
(e.g. renewables, low VOC, low odor)
• Broad country registrations
• Food contact compliance
suppressants. Foamaster ® NO Natural oil based Renewable raw materials, low SVOC.
One of the outstanding innovations in the BASF
Allows for food contact compliance,
Foamaster ® WO White oil based
defoamer portfolio is our award-winning FoamStar® better odor, low fogging.
technology. It is based on a hyper-branched polymer Water-based
FoamStar ® ED Emulsion based Universal, easy to incorporate.
with a 3-dimensional star-shaped structure,
FoamStar ® PB Polymer based High efficiency.
containing hydrophilic as well as hydrophobic
elements. Unlike conventional mineral-oil and silicone For high-gloss systems, e.g. industrial,
FoamStar ® SI Silicone based
printing inks.
defoamers, our FoamStar technology breaks down
®
foam on a molecular level. It acts as a unique FoamStar ® ST Star polymer based High efficiency, fast foam knock-down.
surfactant interacting with the foam-related Efka® PB Polymer based High efficiency.
Non-aqueous
surfactants and destabilizes the foam bubbles. When
Efka® SI Silicone based High efficiency, high-gloss.
combined with conventional defoamer types, it
accelerates bubble-break times and boosts efficiency.
42 43
Defoamers
Defoamers
Defoamers
Technical information, features and benefits
Technical
Incorproation Appearance Application Systems Industry Water-based
information
Emulsions polymerization
Micro foam elimination
High-shear / Mill base
General Industrial
Acrylic emulsions
VOC content (%)2
Alkyd emulsions
Styrene acrylic /
Product name1 Description
Roller coatings
Solvent-based
Natural rubber
Polyurethane
Construction
Water-based
Architectural
Vinylacetate
Solvent-free
Composites
Semi-gloss
Automotive
Solids (%)2
Spray
Gloss
For water-based systems
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
44 45
Defoamers
Defoamers
Defoamers
Technical information, features and benefits
Technical
Incorproation Appearance Application Systems Industry Water-based
information
Emulsions polymerization
Micro foam elimination
High-shear / Mill base
General Industrial
Acrylic emulsions
VOC content (%)2
Alkyd emulsions
Styrene acrylic /
Product name1 Description
Roller coatings
Solvent-based
Natural rubber
Polyurethane
Construction
Water-based
Architectural
Vinylacetate
Solvent-free
Composites
Semi-gloss
Automotive
Solids (%)2
Spray
Gloss
For water-based systems
Foamaster ® NO 2306 100 <0.5 ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □ □
FoamStar ® PB 2706 98 2 ■ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■ ■ ■ ■
Polymer based
FoamStar ® PB 2724 100 <0.5 ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Defoamers
Technical information, features and benefits
Technical
Incorproation Appearance Application Systems Industry Water-based
information
Emulsions polymerization
Micro foam elimination
High-shear / Mill base
General Industrial
Acrylic emulsions
VOC content (%)2
Alkyd emulsions
Styrene acrylic /
Product name1 Description
Roller coatings
Solvent-based
Natural rubber
Polyurethane
Construction
Water-based
Architectural
Vinylacetate
Solvent-free
Composites
Semi-gloss
Automotive
Solids (%)2
Spray
Gloss
For water-based systems
FoamStar ® ST 2400 100 <1 ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ □ □ □ □ ■ ■ ■ ■ □ ■
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
48 49
Defoamers
Defoamers
Defoamers
Technical information, features and benefits
Technical
Incorproation Application System Industry Solvent-free systems Solvent-based
information
Polyacrylates, polyurethane
General Industrial
VOC content (%)2
Solvent-based
Construction
Architectural
NC coatings
Solvent-free
Composites
Automotive
UV-curable
Solids (%)2
systems3
Flooring
Spray
For non-aqueous systems
Efka® PB 2001 26 74 ■ ■ ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Efka® PB 2010 - 80 ■ ■ ■ ■ ■ □ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Efka® PB 2720 AN - 60 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■ ■
Efka® PB 2725 - 60 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ ■
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
50 51
Key benefits
52 53
Rheology modifiers
Rheology modifiers
Rheology Modifiers
Technical information, features and benefits
Low-shear (Brookfield)
Associative interaction
Recommended for
low VOC systems3
General Industrial
VOC content (%)2
Product viscosity
Scrub resistance
pH-independent
High-shear (ICI)
Newtonian flow
Mid-shear (KU)
Solvent-based
Product name1 Description Features and benefits
Construction
Water-based
Architectural
Anti-settling
Solvent-free
High water /
Composites
Automotive
Solids (%)2
Anti-sag
(mPas)2
For water-based systems
Economical grade for thickening asphalt emulsions and
Attagel 15 ®
100 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ □ 5
■ ■ roof coatings with slightly coarser particle size than
Attagel® 30.
Economical grade of attapulgite for tape joint compound
Attagel® 30 100 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ □5 ■ ■ ■ applications that can tolerate a coarser grade than
Natural attapulgite
Attagel® 40 while still providing rheological benefits.
clays
Additionally to key benefits, it improves anti-spatter and
Attagel® 40 100 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ □5 ■ ■
syneresis control.
Additionally to key benefits, it improves anti-spatter and
Attagel® 50 100 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ □5 ■ ■ ■ ■ syneresis control with a smaller particle size than
Attagel® 40.
Advantageous shear thinning rheology profile, for good
Rheovis AS 1110 ®
25 <0.2 20 ■ ■ ■ ■ ■ ■ ■ ■ spray characteristics. Used e.g. in pigment concentrates
to prevent settling and sedimentation.
Shear thinning rheology curve providing a high yield
Rheovis® AS 1125 25 <0.1 <20 ■ ■ ■ ■ ■ ■ ■ ■ ■
point.
Broad food contact compliance with freeze-thaw stable
Rheovis® AS 1127 40 <0.1 50 ■ ■ ■ ■ ■ ■ ■ ■
product form, offering reduced syneresis.
Highly efficient and shear thinning rheology curve, used
Rheovis AS 1130 ®
30 <0.1 <40 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ in pigment and filler slurries. Standard in automotive
formulations.
Anionic polyacrylate Highly efficient, inverse emulsion, especially suited for
Rheovis® AS 1180 30 <10 300 ■ ■ ■ ■ □ ■
copolymers (ASE) adhesive systems.
Highly active, inverse emulsion with outstanding low-
Rheovis® AS 1187 55 <10 <3,000 ■ ■ ■ ■ □ ■ shear thickening efficiency which can be used in a pH
range between 6-12; sodium salt.
Highly active, inverse emulsion with outstanding low-
Rheovis AS 1189 ®
57 <10 <1,500 ■ ■ ■ ■ □ ■ shear thickening efficiency which can be used in a pH
range between 4-12; ammonia salt.
Most newtonian rheology profile in the Rheovis® AS
Rheovis® AS 1337 30 <0.1 30 ■ ■ ■ ■ ■ ■ ■
range.
Micronized, highly efficient granula with excellent
Rheovis® AS 1956 >85 <0.3 Powder ■ ■ ■ ■ ■ ■ ■
blushing resistance in clear coats.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
54 55
Rheology modifiers
Rheology modifiers
Rheology Modifiers
Technical information, features and benefits
Low-shear (Brookfield)
Associative interaction
Recommended for
low VOC systems3
General Industrial
VOC content (%)2
Product viscosity
Scrub resistance
pH-independent
High-shear (ICI)
Newtonian flow
Mid-shear (KU)
Solvent-based
Product name1 Description Features and benefits
Construction
Water-based
Architectural
Anti-settling
Solvent-free
High water /
Composites
Automotive
Solids (%)2
Anti-sag
(mPas)2
For water-based systems
High polymer content. Imparts slight thixotropy and
Rheovis® HS 1153 40 <0.1 <50 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ prolongs the open time. Especially recommended for
paints and plasters.
Combines slighty thixotropic flow behavior with low water
Rheovis HS 1162 ®
35 <0.1 <50 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □ ■ uptake. Has no impact on wet adhesion even after long
water contact.
Recommended as co-thickener for spray applications
Rheovis® HS 1169 30 <0.1 <50 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
with lower water uptake and elongation of open time.
Good leveling and syneresis control; partial HEC
Rheovis® HS 1181 30 <0.2 <50 ■ ■ ■ ■ ■ ■ ■ ■
replacement possible.
High thickening power and less water absorption than
Rheovis® HS 1184 Hydrophobically 30 <0.2 28 ■ ■ ■ ■ ■ ■ ■ ■
Rheovis® HS 1181.
modified anionic
High thickening power for plasters and texture combined
polyacrylate
Rheovis HS 1185 ®
30 <0.2 30 ■ ■ ■ ■ ■ ■ ■ ■ with low odor and less water absorption than Rheovis®
copolymers (HASE)
HS 1181.
Allround mid-shear thickener with high polymer content,
Rheovis® HS 1212 40 <0.5 <50 ■ ■ ■ ■ ■ ■ ■ ■ ■
excellent efficiency and sizable food contact compliance.
Mid- to high-shear thickener with pronounced ICI
Rheovis® HS 1276 30 <0.2 <100 ■ ■ ■ ■ ■
contribution.
Most efficient high-shear HASE with most newtonian
Rheovis® HS 1303 25 <0.2 <50 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ flow behaviour in the Rheovis® HS range; increases layer
thickness and reduces spatter.
High polymer content with newtonian flow behavior;
Rheovis® HS 1332 40 <0.1 <50 ■ ■ ■ ■ ■ ■ ■ ■
improves leveling; sizable food contact compliance.
Powder HASE thickener, recommended for water
Rheovis® HS 1980 97 <0.5 Powder ■ ■ ■ ■ ■ ■ ■ ■
proofing membranes.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
56 57
Rheology modifiers
Rheology modifiers
Rheology Modifiers
Technical information, features and benefits
Low-shear (Brookfield)
Associative interaction
Recommended for
low VOC systems3
General Industrial
VOC content (%)2
Product viscosity
Scrub resistance
pH-independent
High-shear (ICI)
Newtonian flow
Mid-shear (KU)
Solvent-based
Product name1 Description Features and benefits
Construction
Water-based
Architectural
Anti-settling
Solvent-free
High water /
Composites
Automotive
Solids (%)2
Anti-sag
(mPas)2
For water-based systems
Most efficient low-shear HEUR combined with low VOC,
Rheovis® PU 1192 32 <0.1 3,000 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
combining convenient handling and easier defoaming.
Rheovis® PU 1256 Hydrophobically 35 <0.1 23,000 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Slightly pseudoplastic and low VOC.
modified ethoxylated
urethanes (HEUR) High efficiency, low VOC, excellent ICI thickening and
Rheovis® PU 1291 40 <0.1 2,700 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
easy handling.
High efficient high-shear (ICI) build combined with
Rheovis® PU 1331 18 < 0.1 4,500 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
low VOC.
Excellent high-shear thickener imparting excellent
Rheovis® PU 1340 20 < 0.1 2,500 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ □
flow and low VOC (preferred in EMEA).
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
58 59
Rheology modifiers
Rheology modifiers
Rheology Modifiers
Technical information, features and benefits
Low-shear (Brookfield)
Associative interaction
Recommended for
low VOC systems3
General Industrial
VOC content (%)2
Product viscosity
Scrub resistance
pH-independent
High-shear (ICI)
Newtonian flow
Mid-shear (KU)
Solvent-based
Product name1 Description Features and benefits
Construction
Water-based
Architectural
Anti-settling
Solvent-free
High water /
Composites
Automotive
Solids (%)2
Anti-sag
(mPas)2
For solvent-based systems
Introduces highly thixotropic flow behavior combining
Efka® RM 1410 Modified urea 52 48 100 ■ ■ ■ ■ ■ ■ ■ ■ ■ anti-sagging with good leveling with minimum effect on
gloss.
Pre-activated polyamide wax for solvent-based OEM &
Efka RM 1469 ®
Polyamide wax 20 80 Paste ■ ■ ■ ■ ■ ■ ■ refinish as well as for wood coatings with minimum effect
on color and gloss.
Modified hydrogenated Provides excellent sag resistance for non-aqueous
Efka® RM 1900 100 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ ■
castor oil formulations; higher temperature stability.
Hydrogenated Provides excellent sag resistance for non-aqueous
Efka® RM 1920 99 <0.1 Powder ■ ■ ■ ■ ■ ■ ■ ■ ■
castor oil formulations; standard thixotropy.
Prevents settling of pigments by developing a more shear
Overbased calcium
Efka RM 1965 ®
70 30 Paste ■ ■ ■ ■ ■ ■ thinning rheological behavior; prevents the formation of
sulfonate complex
hard pigment sediments.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
60 61
Key benefits
62 63
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Flow and leveling agents Slip
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
64 65
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Slip and leveling agents Slip
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
66 67
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Slip and leveling agents Slip
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
68 69
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Substrate wetting agents Slip
Hydropalat®
100 <0.1 ■ ■ ■ ■ ■ Water-soluble polyalkylene glycol; 100% active.
WE 3155
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
70 71
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Substrate wetting agents Slip
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
72 73
Wetting Agents
Wetting agents and
surface modifiers
and Surface Modifiers
Technical information, features and benefits
Technical
Functionality Systems Industry
information
General Industrial
Substrate wetting
VOC content (%)2
Anti-blocking &
Solvent-based
Low-foaming /
Anti-cratering
Recoatability
Construction
Water-based
Architectural
Product name1 Description Features and benefits
Solvent-free
Composites
De-aeration
Automotive
Solids (%)2
Emulsifier
Leveling
Substrate wetting agents Slip
Hydropalat®
90 <4 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 100% version of Hydropalat® WE 3221.
WE 3220
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
74 75
Key benefits
BASF
and plasticizers.
offers film-forming agents including
coalescents, open-time prolongers
Our portfolio focuses on high-
At BASF Performance and Formulation Additives,
you will find experts in your specific needs who are
glad to support you in finding the right film-forming
performance and sustainable products with agents for your formulations.
renewable content that are non-phthalate and have For more information, you can also look here:
lowest-possible VOC emissions in systems ranging www.basf.com/additives
from paints to plasters and sealants.
76 77
Film-forming agents
Film-forming agents
Film-Forming Agents and Others
Technical information, features and benefits
General Industrial
VOC content (%)2
Product name1 Description Features and benefits
Solvent-based
Construction
Water-based
Architectural
Solvent-free
Composites
Automotive
Solids (%)2
Coalescents
Highly efficient coalescing agent for interior / exterior paints:
Loxanol® CA 5140 Methyl ester of natural fatty acid 100 6 <0.1 ■ ■ ■ ■ □ □ ■
based on renewable raw materials.
Highly efficient coalescing agent for interior / exterior paints,
Loxanol® CA 5308 Dicarboxylic acid ester 100 6 <0.1 ■ ■ ■ ■ □ □ ■
elastomeric coatings, textured finishes and wood coatings.
Excellent balance of coalescent properties; based on renewable
Loxanol® CA 5310 Propylene glycol monoester >98 30 2 ■ ■ ■ ■ ■ □ □
raw materials.
Highly efficient odorless coalescent complying with VOC
Linear ester based on
Loxanol® CA 5336 100 5 <0.1 ■ ■ ■ ■ □ □ ■ restrictions as per 1999/13/EU and 2004/42/EU; based on
renewable raw materials
renewable raw materials.
Opentime prolonger
Open-time prolonger in liquid form; prevents / reduces cracking in
Loxanol® OT 5840 20 600 <0.1 ■ ■ ■ □
Water-based dispersion of resin-based plasters.
oleochemical compounds Highly efficient open-time prolonger; prevents / reduces cracking
Loxanol® OT 5853 30 1.000 <0.1 ■ ■ ■ □
in resin-based plasters; improved storage stability.
Plasticizer
Standard epoxy plasticizer which is extraction-resistant to many
Efka® PL 5381 100 550 <0.1 ■ ■ ■ ■ ■ □ ■ industrial agents. The migration resistance is comparable with
Epoxidized soy bean oil polymeric plasticizers; contains bio-based materials.
Higher purified version of Efka® PL 5381, with a slightly broader
Efka® PL 5382 100 550 <0.1 ■ ■ ■ ■ ■ □ ■
food contact range; contains bio-based materials.
Secondary plasticizer for lacquers, wood and furniture coatings
based on nitrocellulose, as well as acid curing of one and two-
Butyl ester of a natural
Efka PL 5520 V ®
100 10 <0.1 ■ ■ ■ ■ component finishes. Very fast solvent release and an
fatty acid mixture
improvement in sanding and stacking properties as well as
scratch resistance - bio-based raw materials.
Plasticizer for nitrocellulose, chlorinated rubber and PVC systems
as well as for cellulose acetobutyrate. Low viscosity and volatility
Efka® PL 5635 Epoxidized linear ester 100 30 <0.2 ■ ■ ■ ■ □ ■
and excellent migration resistance: based on renewable raw
materials.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
78 79
Film-forming agents
Film-forming agents
Film-Forming Agents and Others
Technical information, features and benefits
General Industrial
VOC content (%)2
Product name1 Description Features and benefits
Solvent-based
Construction
Water-based
Architectural
Solvent-free
Composites
Automotive
Solids (%)2
Plasticizer
Phthalate-free plasticizer for the use in PVC, coatings and rubber;
excellent durability with low temperature resistance and broad
Efka® PL 5643 Di-octyl adipate 100 10 <0.1 ■ ■ ■ ■ □ □
food contact compliance; boiling point >400°C; solvent for
ceramic inkjet.
Phthalate-free plasticizer for PVC, coatings, inks and rubber
1,2-cyclohexanedicarboxylic
Efka PL 5646 ®
100 50 <0.1 ■ ■ ■ ■ ■ suitable for sensitive applications; boiling point ~394°C;
acid diisononyl ester
solvent for ceramic inkjet.
Highly compatible plasticizer designed to provide maximum low
temperature flexibility to various types of elastomers; enhances
Efka® PL 5651 Bis(butylcarbitol) formal 100 100 <0.1 ■ ■ ■ ■ ■ ■ ■ ■
low temperature properties and reduces processing viscosities in
elastomers and thermoplastic elastomers.
Polypropylene glycol Highly efficient plasticizer for polymer dispersions in gloss paints,
Loxanol® PL 5060 100 94 <0.1 ■ ■ ■ ■ ■ ■ ■ ■
alkylphenylether elastomeric and wood coatings.
Improves pigment wetting and acts as a humectant to control the
Loxanol PL 5830 ®
Polypropylene glycol 100 60 <0.1 ■ ■ ■ □ ■ □ drying behavior of water-based formulations including pigment
concentrates.
Miscellaneous
Loxanol® MI 6311 Polyamide 75 700 - ■ ■ ■ ■ Highly efficient formaldehyde scavenger for water-based paints.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
80 81
Film-forming agents
Film-forming agents
Film-Forming Agents and Others
Technical information, features and benefits
General Industrial
VOC content (%)2
Product name1 Description Features and benefits
Solvent-based
Construction
Water-based
Architectural
Solvent-free
Composites
Automotive
Solids (%)2
Miscellaneous
Used as a primer for coatings applications; highly effective
Loxanol MI 6730 ®
50 25.000 <0.1 ■ ■ ■ ■ adhesion promotor in multi layer packaging films; recommended
for ionic / cationic binders and in a pre-treatment solution.
Crosslinking agent for PVB (Poylvinylbutyral) inks; highly effective
Polyethylene imine
Loxanol® MI 6735 100 15.000 <0.1 ■ ■ ■ ■ ■ adhesion promoter for bonding different materials; recommended
for ionic/cationic binders and in a pre-treatment solution.
Improves water resistance in the early stages of drying and
Loxanol MI 6835 ®
50 100 <0.1 ■ ■ ■ enhances initial resistance to water (early rain resistance); suitable
for paints and textured finishes.
Improved hydrophobicity; reduces mud cracks; reduces snail trail
Loxanol® MI 6840 Paraffin wax 62 350 <0.4 ■ ■ ■ ■
tendency under critical conditions.
Conductivity aids
Increases the electric conductivity of a liquid or solid paint film;
Efka® IO 6779 80 - 20 □ ■ ■ □ ■ ■ ■ □
Solution of quaternary long chain fatty acid modified salt.
ammonium salt Increases the electric conductivity of a liquid or solid paint film;
Efka® IO 6782 80 - 30 □ ■ ■ □ ■ ■ ■ □
short chain fatty acid modified salt.
Conductivity promoter to adjust anti-static property of coatings
Ionic liquid, hydroxy functional
Efka® IO 6783 >98 1.100 <2 ■ ■ □ ■ ■ ■ ■ and resistivity in liquid formulations to prevent static charge
ammonium salt
build-up or dust attraction during and after the drying process.
Conductivity promoter to adjust anti-static property of coatings
and resistivity in liquid formulations to prevent static charge
Efka® IO 6785 >97 120 <3 ■ ■ □ ■ ■ ■ ■
build-up or dust attraction during and after the drying process;
Ionic liquid, non-functional medium active.
imidazolium salt Conductivity promoter to adjust anti-static property of coatings
and resistivity in liquid formulations to prevent static charge
Efka® IO 6786 >97 20 <3 ■ ■ □ ■ ■ ■
build-up or dust attraction during and after the drying process;
highly active.
1
All products comply with APEO-free claims. APEO has not been intentionally added. 4
Contolled free radical polymerization.
2
All measurements reflect approximate values. 5
Needs synergist. Recommended
3
Measurements done according to the EU Ecolabel 2014/312/EU for indoor and outdoor paints and varnishes.
For products with a VOC level above 10% the value is based on calculation according to recipe. Suitable
82 83
Bio-based Portfolio
BASF’s dedicated bio-based portfolio offers Our aim is to continuously increase the share of We also take into consideration recognized certification
solutions for multiple applications. Either as substitute renewable raw materials in our value chains. As for standards such as the Roundtable on Sustainable Palm Oil
for a fossil alternative (so called drop-ins) to reduce fossil raw materials, we also consider economic (RSPO) in our decisions.
the carbon footprint or new products using their criteria, aspects of supply security, and process
unique properties that can either not or not cost- and product safety, as well as the potential impact on As part of our commitment to greater sustainability, we
efficiently be achieved with a fossil feedstock. sustainability along the value chain. Alongside concentrate on value chains that are relevant quantitatively or
positive effects like reducing greenhouse gas that do not yet have certification standards. We are also working
In addition to fossil resources, we employ renewable emissions, these can also have negative effects on on product innovations and on enhancing our production
raw materials, mainly based on vegetable oils, fats, areas such as biodiversity, land use or working processes to improve the profitability and competitiveness of
grains, sugar and wood. In 2022, we purchased conditions, depending on the raw material. This is renewable resources.
around 1.2 million metric tons of renewable raw why we carefully weigh up the advantages and
materials. We use these to produce ingredients for disadvantages of using renewable resources, for
the detergent and cleaner industry and natural active example with Eco-Efficiency Analyses. At the same
ingredients for the cosmetics industry. time, we seek dialog with our stakeholders to raise
Segregated bio-based products
awareness of conflicting goals.
Raw materials with renewable carbon content directly in our production
84 85
Bio-based production
Bio-based production
Bio-based Portfolio
Technical information, features and benefits
Product name Biogenic Carbon (%)1 Features and benefits Product name Biogenic Carbon (%)1 Features and benefits
Universal dispersing agent; also suitable as co-dispersant; 100% active content for non-pigmented and low pigmented coatings,
Dispex® Ultra FA 4420 55
improves compatibility and color acceptance in base paint. FoamStar ® SI 2210 39 printing inks and adhesives. provides a stron sponteneous defoamering
Non-ionic nature; especially designed for organic pigment effect with long-term defoaming peristancy.
Dispex® Ultra FA 4437 42
concentrates, supports effect pigment orientation. Highly effective defoamer for aqueous pigment concentrates and
FoamStar ® SI 2217 73
Universal, non-ionic wetting and dispersing agent; especially systems with high surfactant content.
Dispex® Ultra FA 4488 59
suitable for organic pigment concentrates. pH stable, low-foaming wetting agent with excellent reduction of
Hydropalat® WE 3120 38
Product shows good pigment wetting and stabilizing performance dynamic surface tension; suitable for printing inks and adhesives.
Dispex® Ultra PA 4501 58
and excellent compatibility with various resin systems. Low-foaming wetting agent for water-based coatings, printing inks
Hydropalat® WE 3130 66
For solvent-based decorative systems including low to polar solvent and adhesives.
Efka® FA 4608 91
containing systems. Especially suitable as wetting and dispersing agent for the formulation
Solvent-based and solvent-free systems; also effective for gelling Hydropalat® WE 3625 100 of aqueous, binder- and solvent-free pigment pastes. It permits the
Efka® FA 4644 40
bentonite concentrates. development of universally compatible pigment concentrates.
For polyurethane systems and stoving enamels; also for orientation
Efka® FA 4665 33 Irganox® 1076 54 AO for solvent-based and powder coating applications.
of aluminum pigments in CAB automotive base coats.
For polyurethane systems and stoving enamels; strong Thiosynergist suitable when high-temperature aging is required, needs
Efka® FA 4666 42 Irganox® PS 802 FL 60
anti-settling effect. combination with primary AO.
Silicone-free deaerator and defoamer for UV curable formulations, Highly efficient coalescing agent for interior/exterior paints: based on
Loxanol® CA 5140 94
Efka PB 2770 ®
61 composites, gel coats, cast resins and adhesives, with outstanding renewable raw materials.
compatibility and excellent recoatability. Highly efficient coalescent based on renewable resources, excellent
Standard epoxy plasticizer which is extraction-resistant to many reduction of minimum film forming temperature (MFFT); good low
Loxanol® CA 5330 95
Efka PL 5381 ®
100 industrial agents. The migration resistance is comparable with temperature cure/non-yellowing/ outstanding solvency. Recommended
polymeric plasticizers. mainly for exterior applictions.
Higher purified version of Efka PL 5381, with a slightly broader
® Highly efficient odorless coalescent complying with VOC restrictions as
Efka® PL 5382 100 Loxanol® CA 5336 84
food contact range. per 1999/13/EU and 2004/42/EU; based on renewable raw materials.
Plasticizer for nitrocellulose, chlorinated rubber and PVC systems as Monoester of a fatty acid derived from renewable raw materials; product
Loxanol® MI 6430 62
Efka® PL 5635 71 well as for cellulose acetobutyrate. Low viscosity and volatility and is biodegradable; good solvency power.
excellent migration resistance; based on renewable ressources. Renewable raw material based solvent with excellent toxicological
Provides excellent sag resistance for non-aqueous formulations; profile for multiple applications such as paint strippers or cleaning
Efka® RM 1900 100 Loxanol® MI 6470 63
higher temperature stability. solvents; green and safe alternative for N-methyl pyrrolidone (NMP)
Provides excellent sag resistance for non-aqueous formulations; and similar type of solvents.
Efka® RM 1920 100
standard thixotropy. Highly efficient open-time prolonger; prevents/reduces cracking in
Loxanol® OT 5853 80
Universal defoamer partly based on natural oils; effectively removing resin-based plasters; improved storage stability
Foamaster ® NO 2306 51
of micro-foam. Most efficient low-shear HEUR combined with low VOC, easy handling
Rheovis® PU 1192 22
Natural oil based defoamer for monomer stripping in latex manufacturing and enabling of easier defoaming.
Foamaster ® NO 2331 98
and emulsion polymerisation; broadest Food Contact Compliance. Multipurpose basic HALS for various applications, use in water-borne
Universal, highly efficient defoamer based on natural oils for emulsion Tinuvin® 292 37 coatings may require addition of cosolvents, may interact with sensitive
Foamaster ® NO 2335 97 paints; defoamer for matt to satin-finish water-based paints and dispersion binders
coatings; extremly low S-VOC content.
Tinuvin® 770 DF (ED) 37 HALS suitable for powder coating applications
1
All measurements reflect approximate values based on ASTM D6866-18 (method B)
86 87
Index
A Dispex® Ultra PA 4560 36 Efka® PB 2720 AN 50 Efka® SL 3200 66 FoamStar® PB 2724 46 Hydropalat® WE 3320 72
Attagel 15®
54 Dispex Ultra PA 4590
®
36 Efka PB 2725
®
50 Efka SL 3210
®
66 FoamStar SI 2210
®
46 Hydropalat® WE 3322 74
Attagel 30®
54 Dispex Ultra PX 4275
®
36 Efka PB 2744
®
50 Efka SL 3230
®
66 FoamStar SI 2213
®
46 Hydropalat WE 3323 ®
74
Attagel® 40 54 Dispex® Ultra PX 4290 36 Efka® PB 2770 50 Efka® SL 3236 66 FoamStar® SI 2217 46 Hydropalat® WE 3475 74
Attagel 50®
54 Dispex Ultra PX 4522
®
36 Efka PL 5381
®
78 Efka SL 3257
®
68 FoamStar SI 2240
®
46 Hydropalat WE 3477 ®
74
Dispex® Ultra PX 4525 36 Efka® PL 5382 78 Efka® SL 3258 68 FoamStar® SI 2250 46 Hydropalat® WE 3485 74
C Dispex Ultra PX 4575
®
36 Efka PL 5520 V
®
78 Efka SL 3259
®
68 FoamStar SI 2280
®
46 Hydropalat WE 3488 ®
74
Chimassorb® 2020 FDL (ED) 18 Dispex® Ultra PX 4585 36 Efka® PL 5635 78 Efka® SL 3288 68 FoamStar® SI 2281 46 Hydropalat® WE 3650 72
Chimassorb 81 (ED)
®
16 Efka PL 5643
®
80 Efka SL 3299
®
68 FoamStar SI 2292
®
46 Hydropalat WE 3694 ®
72
E Efka® PL 5646 80 Efka® SL 3883 68 FoamStar® SI 2299 46 Hydropalat® WE 3966 72
D Efka FA 4600
®
34 Efka PL 5651
®
80 FoamStar ST 2400
®
48 Hydropalat WE 3987 ®
72
Dispex® AA 4030 30 Efka® FA 4601 34 Efka® PU 4009 38 F FoamStar® ST 2410 48
Dispex® AA 4040 30 Efka® FA 4608 34 Efka® PU 4010 38 Foamaster® MO 2108 44 FoamStar® ST 2412 48 I
Dispex AA 4135
®
30 Efka FA 4609
®
34 Efka PU 4015
®
38 Foamaster MO 2111
®
44 FoamStar® ST 2420 48 Irgafos® 126 (ED) 24
Dispex AA 4140
®
30 Efka FA 4610
®
34 Efka PU 4046
®
38 Foamaster MO 2114
®
44 FoamStar ST 2434
®
48 Irgafos 168 (ED)
®
24
Dispex® AA 4141 30 Efka® FA 4611 34 Efka® PU 4047 38 Foamaster® MO 2122 44 FoamStar® ST 2437 48 Irganox® 1010 (ED) 24
Dispex® AA 4144 30 Efka® FA 4620 34 Efka® PU 4050 38 Foamaster® MO 2133 44 FoamStar® ST 2438 48 Irganox® 1035 24
Dispex AA 4145
®
30 Efka FA 4644
®
34 Efka PU 4061
®
38 Foamaster MO 2134
®
44 FoamStar ST 2439
®
48 Irganox® 1076 (ED) 24
Dispex AA 4935
®
30 Efka FA 4647
®
34 Efka PU 4063
®
38 Foamaster MO 2140
®
44 FoamStar ST 2445
®
48 Irganox 1135®
24
Dispex® CX 4230 30 Efka® FA 4654 34 Efka® PX 4300 40 Foamaster® MO 2150 44 FoamStar® ST 2446 48 Irganox® 1726 24
Dispex CX 4231
®
30 Efka FA 4663
®
34 Efka PX 4310
®
40 Foamaster MO 2152
®
44 FoamStar ST 2454
®
48 Irganox 245 (ED)
®
24
Dispex® CX 4234 30 Efka® FA 4665 34 Efka® PX 4320 40 Foamaster® MO 2155 AG 44 Irganox® 245 DW 24
Dispex CX 4240
®
30 Efka FA 4666
®
34 Efka PX 4330
®
40 Foamaster MO 2157
®
44 H Irganox B 225 (ED)
®
26
Dispex® CX 4248 30 Efka® FA 4672 34 Efka® PX 4340 40 Foamaster® MO 2159 44 Hydropalat® FL 3635 68 Irganox® B 900 26
Dispex CX 4320
®
30 Efka FL 3730
®
64 Efka PX 4350
®
40 Foamaster MO 2170
®
44 Hydropalat SL 3683
®
68 Irganox PS 800 L
®
24
Dispex® CX 4340 30 Efka® FL 3740 64 Efka® PX 4701 40 Foamaster® MO 2172 44 Hydropalat® WE 3105 70 Irganox® PS 802 FL 24
Dispex CX 4345
®
30 Efka FL 3741
®
64 Efka PX 4703
®
40 Foamaster MO 2185
®
44 Hydropalat WE 3110
®
70 Irgastab Plus 5193
®
26
Dispex® CX 4348 30 Efka® FL 3745 64 Efka® PX 4733 40 Foamaster® MO 2190 44 Hydropalat® WE 3111 70 Irgastab® UV 22 18
Dispex HIDE CX 4540
®
30 Efka FL 3750
®
64 Efka PX 4753
®
40 Foamaster MO NDW
®
44 Hydropalat WE 3120
®
70 Irgastab Plus 5170 MG
®
26
Dispex® Ultra CX 4452 36 Efka® FL 3755 64 Efka® PX 4780 40 Foamaster® MO NXZ 44 Hydropalat® WE 3130 70
Dispex® Ultra FA 4404 32 Efka® FL 3930 64 Efka® PX 4787 40 Foamaster® NO 2306 46 Hydropalat® WE 3136 70 L
Dispex Ultra FA 4416
®
32 Efka IO 6782
®
82 Efka RM 1410
®
60 Foamaster NO 2331
®
46 Hydropalat® WE 3147 70 Lignostab® 1198 14
Dispex Ultra FA 4420
®
32 Efka IO 6783
®
82 Efka RM 1469
®
60 Foamaster NO 2335
®
46 Hydropalat WE 3155
®
70 Lignostab 530 ®
14
Dispex® Ultra FA 4425 32 Efka® IO 6785 82 Efka® RM 1900 60 Foamaster® WO 2310 46 Hydropalat® WE 3165 70 Loxanol® CA 5140 78
Dispex Ultra FA 4430
®
32 Efka IO 6786
®
82 Efka RM 1920
®
60 Foamaster WO 2323
®
46 Hydropalat WE 3185
®
72 Loxanol CA 5308®
78
Dispex® Ultra FA 4431 32 Efka® PA 4400 36 Efka® RM 1965 60 Foamaster® WO 2360 46 Hydropalat® WE 3189 72 Loxanol® CA 5310 78
Dispex Ultra FA 4437
®
32 Efka PA 4401
®
36 Efka SI 2722 S
®
50 Foamaster WO 2390
®
46 Hydropalat WE 3197
®
72 Loxanol CA 5336®
78
Dispex® Ultra FA 4480 32 Efka® PA 4404 36 Efka® SI 2723 50 FoamStar® ED 2521 46 Hydropalat® WE 3220 74 Loxanol® MI 6311 80
Dispex Ultra FA 4483
®
32 Efka PA 4450
®
36 Efka SL 3030
®
66 FoamStar ED 2522
®
46 Hydropalat WE 3221
®
74 Loxanol MI 6470®
80
Dispex® Ultra FA 4484 32 Efka® PB 2001 50 Efka® SL 3031 66 FoamStar® ED 2523 46 Hydropalat® WE 3229 74 Loxanol® MI 6627 80
Dispex Ultra FA 4488
®
32 Efka PB 2010
®
50 Efka SL 3033
®
66 FoamStar ED 2528
®
46 Hydropalat WE 3311
®
72 Loxanol MI 6727®
80
Dispex® Ultra PA 4550 36 Efka® PB 2020 50 Efka® SL 3035 66 FoamStar® PB 2706 46 Hydropalat® WE 3317 72 Loxanol® MI 6730 82
1
For regional product availability please kindly contact your local BASF-representative. 1
For regional product availability please kindly contact your local BASF-representative.
88 89
Index Lab Assistant
1
For regional product availability please kindly contact your local BASF-representative.
90 91
Contacts worldwide
Asia
BASF East Asia Regional Headquarters Ltd.
36/F Two Taikoo Place
979 King’s Road
Quarry Bay
Hong Kong
formulation-additives-asia@basf.com
Europe
BASF SE
Formulation Additives
67056 Ludwigshafen
Germany
formulation-additives-europe@basf.com
North America
BASF Corporation
11501 Steele Creek Road
Charlotte, NC 28273
USA
formulation-additives-nafta@basf.com
South America
BASF S.A.
Rochaverá - Crystal Tower
Av. das Naçoes Unidas, 14.171
Morumbi - São Paulo - SP
Brazil
formulation-additives-south-america@basf.com
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect
ED2 0319e
processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither
do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings,
photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual
quality of the product. The agreed contractual quality of the product results exclusively from the statements made in the product specification.
It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed. When
handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace
hygiene measures adequate for handling chemicals must be observed.
92