Whirlpool Europe

SERVICE Customer Services ADP 4415 WH

Service Manual
Dishwasher
ADP 4415 WH
Model ADP 4415 WH
Version 8511 761 10820 Page

Technical data 2-4

Spare part list 5-6

Exploded view 7-8

Circuit diagram 9

Program diagram 10

Text/Legend 11 - 16

Family WRC - IC
LOW 4

This documentation is only intended for qualified technicians who are aware of the respec-
tive safety regulations.
Date: 23.05.2005 Subject to modification
Document-No.: 4812 728 12296
23.05.2005 / Page 2 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE

Technical data
Dimension Water Volume at permanent spray system

Height 85.0 cm Water Volume Level

Width 59.7 cm Regeneration 0.3 l 15 mm
Depth 59.6 cm Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Weight 56 kg
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Electronic boards Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Service boards see spare part list Safety/ overflow 8.5 l 141 mm
Serial boards see on the boards itself
Programmed control board and programing of Measuring the level
version , see „Board Service“ and „DATA“ on rating
plate of inner door: Remove the coarse sieve, put in a measuring
UCB 704722 meter into the sump, measure the hight of the
Data set 704712 water level.

Basic UCB, not programmed Detergent max.

see on the board itself 4619 727 04651
Pre-wash 10 cm3
Main-wash 40 cm3
Succession of programs Rinse aid 135 cm3
6 Dosage steps 1-6 ml
Programs see program diagram
Succession P1a-P3a-P5b-P7a
Water softener

Datas Energy Label Saltcontainer 2 kg

Resin container 700 cm3
Reference program P5b Regeneration dosage 300 cm3
Energy Performance B
Cleaning Performance A Water pressure
Drying Performance B
Inlet pressure 0.3 - 10 bar
Spray pump pressure 0.3 bar
Alarms

Rotations
Refill rinse aid
Refill salt
Spray pump motor 2800 RPM
Drain pump motor 3000 RPM
Program information Spray arm lower 30 - 40 RPM
Spray arm upper 30 - 40 RPM
Start indicator

All programs will be locked after start. Changing

the program or finishing the program will be
possible only after pressing the start button for
longer then 1.5 sec. (Break by customer)

A switching off the appliance or unplug the

appliance for a while, this will frozen the program
step and later on, the program continuos on the
same position.

Exception: Switching off the appliance or unplug

the appliance during the drying phase, this will lead
directly to the end of the program.
 Whirlpool Europe ADP 4415 WH 23.05.2005 / Page 3
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Technical data
Flow rates/ Inlet volume Water safty options

Flow meter (at 0.3 bar = quantity 1.1 l/min) Waterstop system Electronic aqua control
208 lmp/l
Spray pump 65 l/min
Drain pump 16 l/min Single electric water inlet valve
Pump height max. 1.1 m
Inlet valve 4 l/min Voltage 220/ 240 V
Spray arm lower ~ 33 l/min Frequency 50/ 60 Hz
Sprayarm upper ~ 27 l/min Resistance 3.76 kΩ
Sprayarm/ Shower top ~8 l/min
Regenerating valve
Electrical base data
Voltage 220/ 240 V
Voltage 220/ 240 V Frequency 50/ 60 Hz
Frequency 50 Hz Resistance 3.13 kΩ
Total power 2.0 - 2.2 kW
Fuse 10 A
Coil of dispenser

Spray pump motor permanent spray system Voltage 220/ 240 V

Frequency 50/ 60 Hz
Voltage 220/ 240 V Resistance 1.3 kΩ
Power consumption 140 W
HI 69 Ω
HA 48 Ω Reed contacts
Capacitor 4 µF
flow meter
Drain pump motor salt control
rinse aid control
Voltage 220/ 240 V
Power consumption 30 W NTC
Resistance 146 Ω
20 ˚C 58.1 kΩ
Heating - 1 Element system 25 ˚C 47.1 kΩ
30 ˚C 38.2 kΩ
Voltage 220/ 240 V 40 ˚C 25.4 kΩ
Power consumption 1.87/ 2.04 kW 50 ˚C 17.2 kΩ
Resistance 24.5 Ω 60 ˚C 11.8 kΩ
Heating speed ~ 2.0 ˚C/min 70 ˚C 8.3 kΩ
Temperature on surface ~ 115 ˚C 80 ˚C 6 kΩ
Safety thermostat 85 ˚C 4 kΩ
self reset
(Temperature of water) ~ 85 ˚C
Fuse 206 ˚C Regeneration

Volume 300 cm3

after wash cycles depending on the water

softener setting
water hardness 0 - 40 ˚dh
0 - 10.7 mmol/l
0 - 107 ˚Fh

Salt consumption
for regeneration ~ 77 g

Number of cycles
with 2 kg salt ~ 26
23.05.2005 / Page 4 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE
Technical data

Water softener setting

To change the water softener setting:

• Push the POWER button on
• Change to program 2
• Hold the START button for 5 seconds until the LED is flashing
• Water softener setting is shown by flashing LED
• By pushing the START button you can change the setting
• Push the POWER button off to save and exit the water softener setting

Water hardness German degrees French degrees English degrees mmol/l Water softener setting is
˚dH ˚fH Clarke ˚e shown by flashing LED
1 soft 0-5 0-9 0 - 6,3 0 - 0.9 1x
1 - 2 soft/ medium 6 - 10 10 - 18 7 - 12.6 1 - 1.8 2x
2 medium 11 - 15 19 - 27 13.3 - 18.9 1.9 - 2.7 3x
3 medium/ hard 16 - 21 28 - 37 19.6 - 25.9 2.8 - 3.7 4x
4 hard 22 - 28 38 - 50 26.6 - 35 3.8 - 5.0 5x
4 very hard 29 - 35 51 - 63 35.7 - 44.1 5.1 - 6.3 6x
4 extremely hard 36 - 60 64 - 107 44.8 - 74.9 6.4 - 10.7 7x

Accesory

If you need spare parts apart from the spare part list have a look in the Service Bulletin 4812 718 40084.

For higher mounted Dishwashers to prevent the drain off effect - also usable for lower drain pipes and to
prevent the failure F8 use Kit 4812 310 18993.
 Whirlpool Europe ADP4415WH 23.05.2005 / Page 5
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Spare part list

Model ADP 4415 WH

Service No. 851176110820
Version 851176110820

Pos. No. 12NC Code Description Pos. No. 12NC Code Description

003 0 4812 440 19594 Traverse 450 0 4812 259 28684 Heating element
004 0 4812 440 18952 Drip tray assy 480 0 4812 321 28424 Cable harness (EBL) without LS6
004 1 4812 401 18402 Holder 480 3 4812 401 18418 Protector f.wiring
011 0 4812 505 18357 Foot short 490 0 4819 321 18136 Cable,mains 2m SA
022 0 4812 440 10755 Side panel left 490 1 4812 321 28367 Strain relief

022 1 4812 440 10754 Side panel right 521 0 4812 218 38224 User board (UCB)EBL/SAM
024 0 4812 440 10417 Panel, rear 521 0 4812 218 48083 User board (UCB)
024 5 4812 440 10944 Damper fix Motor synch 521 8 4812 530 78066 Axle program knob grey
030 0 4812 310 18916 Table top cpl. WH 571 0 4812 281 28379 Valve inlet
034 0 4812 404 78237 Spacer 575 0 4812 281 28361 Regen.valve

040 1 4812 417 18774 Hinge left 583 0 4812 271 28407 Switch diaphragm
040 2 4812 417 18773 Hinge right 616 0 4812 281 18047 Contact,reed salt
040 3 4812 417 19172 Protector f.door (set) 616 1 4812 271 58161 Contact,reed rinsing agent
044 0 4812 492 38358 Spring f.door 621 0 4819 410 29004 Switch ON/OFF
047 0 4812 404 48746 Brake f.door 633 0 4812 271 38355 Microswitch door

047 1 4812 401 18397 Band,brake 680 0 4812 418 68318 Combidosage cpl.
047 2 4812 404 68023 Hook 680 1 4812 466 68495 Gasket
053 0 4812 440 89031 Plinth WH 680 3 4812 440 11209 Lever,fastener combidos.
053 4 4812 440 89036 Plinth rounded 681 1 4812 466 68497 Gasket
061 0 4812 466 88672 Counter weight 681 2 4812 440 18975 Flap

065 0 4812 466 48052 Insulation 682 0 4812 466 68496 Gasket
103 0 4812 440 10758 Door outer 691 0 4812 282 68035 Feeler NTC
120 0 4812 440 19456 Door,inner 701 0 4812 530 28081 Hose, inlet 3/8Z cpl. 5m
120 1 4812 440 18969 Batten 701 1 4812 310 18302 Yoke
130 0 4812 417 58373 Tilt lock cpl. bk 701 2 4822 480 50159 Sieve inlet

131 0 4812 401 18416 Hook lock 710 0 4812 310 19022 Monoblock SK5176.0
191 0 4812 466 68564 Gasket door 710 2 4812 310 38896 Threaded ring
192 0 4812 466 68467 Gasket, door lower 710 3 4819 466 69562 Gasket set
241 0 4812 458 19027 Basket upper straight 714 0 4812 462 79903 Threaded cap saph
241 1 4812 458 18324 Holder cups right wh 716 0 4812 418 68147 Reg.dosage with flowmeter

241 3 4812 528 88068 Wheel,basket upper (set) 716 1 4812 466 68475 Gasket
241 8 4812 466 68553 Spacer cap set 716 2 4812 462 78994 Cover
241 9 4812 528 88101 Wheel,basket basket upper 717 1 4812 462 79793 Stopper
242 0 4812 310 28134 Basket lower KIT 721 1 4812 360 68689 Spray arm lower. cpl. sa
242 1 4812 528 88069 Wheel,basket lower wh 722 0 4812 360 68687 Spray arm upper sa

242 4 4812 466 48091 Fixation grey 722 2 4812 360 68693 Spray arm 2nd level cpl. saph
243 5 4812 310 68033 Cutlery basket soft handle opaquo 723 0 4812 360 68691 Douche ceiling
243 6 4812 458 18996 Grille wh 726 1 4812 530 29331 Tube assembly cpl.saph
261 0 4812 462 79831 Rail telescope, inner 726 2 4812 505 18208 Nut
261 1 4812 462 79768 Cap rail rear 743 0 4812 511 48171 Condenser

261 2 4812 310 18972 Cap rail front 743 1 4812 530 28102 Hose, inlet
263 0 4819 520 18013 Ball cage cpl. 743 3 4812 462 79857 Cover
263 1 4812 310 48026 Service kit balls plastic 743 4 4812 530 28807 Hose 9x1,5x270+10
301 0 4812 453 72998 Control panel ADP 4415 WH 743 7 4812 466 68514 Gasket
301 1 4812 452 79742 Nameplate Whirlpool 751 0 4812 418 18338 Water collector

303 1 4812 460 38148 Plate,handle 755 0 4812 530 29119 Bend
331 0 4812 413 59155 Knob program cpl. WH 755 2 4812 530 48148 Tray,leak
332 0 4812 410 29163 Button Start 761 0 4812 480 58122 Sieve fine
332 3 4812 410 29166 Button ON/OFF WH 761 2 4812 418 18337 Cover sieve
350 2 4812 381 28068 Light guide 761 3 4812 418 18341 Cover

400 0 4812 361 58334 Motor +SP,50Hz,per.HP-PNT 761 4 4812 530 58141 O-Ring
400 1 4812 466 68776 Spacer support motor/sp 763 0 4812 480 58123 Sieve coarse
421 0 4812 121 18158 Interf.filter 781 0 4812 530 29113 Hose,draining
430 0 4812 360 18508 Pump,draining cpl. 781 3 4812 281 28417 Flap non-return
430 1 4812 466 68689 Gasket 783 4 4812 530 28888 Hose
23.05.2005 / Page 6 ADP4415WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE
Spare part list

Model ADP 4415 WH

Service No. 851176110820
Version 851176110820

Pos. No. 12NC Code Description

783 6 4812 530 28796 Hose 10x3x180+10

791 0 4812 532 68099 Gasket
791 2 4812 530 58093 Gasket
791 4 4812 466 68503 Gasket
791 5 4812 466 68504 Gasket

901 0 4822 401 10258 Clamp,hose 10-18 mm

901 1 4812 401 18424 Strap 050,0
901 2 4812 401 18157 Strap 32-50/9 C61
901 5 4812 401 48573 Strap 028,6
904 0 4812 462 78998 Threaded cap

910 1 4812 502 18394 Screw 3,5x14-H

910 2 4812 502 18363 Screw 4,0x12-H
910 3 4812 502 18527 Screw 4x15 T20
910 4 4812 502 18385 Screw M3,5x8-T15M
910 5 4812 502 18393 Screw 3,5x9-1 Tx15

910 7 4812 502 18397 Screw INOX A2 M 5X12

910 8 4812 502 18389 Screw 5x20 T20
910 9 4812 401 18425 Screw 2,5x18-H
964 0 4812 466 68536 Gasket housing ri/le
964 1 4812 466 68469 Gasket housing upper

993 0 4819 530 29028 Bow

993 5 4822 532 80216 Funnel salt
 Whirlpool Europe ADP 4415 WH 23.05.2005 / Page 7
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Exploded view
23.05.2005 / Page 8 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE
Exploded view
 Circuit diagram
SERVICE

C1 Capacitor
DLB Timerswitch Delay
DPM Drain pump motor
DD Cleaning agent dosage
DR Final rinse dosage
DS Door switch
FM Flow meter
HEW Heating
IF Interference filter
L Line
Whirlpool Europe
Customer Service

MS Main switch
NTC Thermostat temp. sensor
N Neutral
PRG Plug to program
RE2 Relay Heating
RE3 Relay Spray pump motor
RR SA Reed relay salt
RR RA Reed relay rinsaid
SPM Sprayarm motor
THS1 Safety thermostat
THS 2 Fuse
TBL Power supply terminal
TL Winding protective
contact
UCB User- and Control board
ADP 4415 WH
8511 761 10820

VM Fan ventilator
WV1 Water inlet valve
WV2 Water regenerating valve
WI Water indicator

00 black
66 blue
88 grey
99 white
Doc. No: 4812 728 12296
23.05.2005 / Page 9
23.05.2005 / Page 10 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE
Program diagram
 Whirlpool Europe ADP 4415 WH 23.05.2005 / Page 11
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Text/Legend
23.05.2005 / Page 12 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE

Text/Legend
 Whirlpool Europe ADP 4415 WH 23.05.2005 / Page 13
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Text/Legend
23.05.2005 / Page 14 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE

Text/Legend
 Whirlpool Europe ADP 4415 WH 23.05.2005 / Page 15
SERVICE Customer Service 8511 761 10820 Doc. No: 4812 728 12296

Text/Legend
23.05.2005 / Page 16 ADP 4415 WH Whirlpool Europe
Doc. No: 4812 728 12296 8511 761 10820 Customer Service SERVICE

Text/Legend