SPECIFICATIONS SHEET PERFECT FIT FOR YOU

NICKNAME
ITEM WU342R-HKMTJD3
Model W04D-TR
Type Diesel, 4-cycle vertical, 4-cylinder in-line, overhead valve, water cooled, direct injection
Displacement cc 4,009
Max. Output (JIS Gross) kW(PS)/rpm 96 (130) / 2,700
Engine Max. Torque (JIS Gross) Nm(kgfm)/rpm 363 (37.0) / 1,800
Bore and Stroke mm 104 x 118

GVW 5,000kg
Fuel Injection System In-line, jerk type, automatic timer and mechanical governor
Air Intake System Turbo-intercooled, stack type Designed
Max. Engine Speed rpm 3,300
Clutch
Type Dry singIe plate, diaphragm type with damper spring (6 Wheeler)
Diameter mm 300

UNECE
Model / No. of Speed M550 / 5-Speed
Transmission Type Five (5) forward and one (1) reverse, overdrive, synchromesh 1st – 5th
Ratio (1st – Top) 4.981 / 0.738 REGULATION COMPLIANCE
Type Reversed Elliot, “I” section beam
Front
Capacity kg 2,600
Axle
Type Full floating, single reduction, singIe speed by hypoid gearing
Rear
Capacity kg 5,700
Hydraulic system with two leading shoes for front wheels and dual two leading shoes for rear
Service Brake Type
wheels
Brake Service Brake Control Vacuum servo hydraulic, dual circuits
Parking Brake Type Mechanical, internal expanding, acting on transmission output shaft
Exhaust Brake Type Electric-vacuum actuator with valve in exhaust pipe
Front Type Semi elliptic leaf spring with dual acting shock absorber
Suspension
Rear Type Semi elliptic with auxiliary leaf sprlng and dual acting shock absorber
Frame Width mm 700
Frame
Height x Width x Thickness mm 180 x 65 x 6.0 (strengthened with a 3.2mm inner frame)
Telescopic and tilt steering column with locking device, recirculating ball with hydraulic booster,
Steering Type
integral type
Wheel Type 5 Stud Disc Wheels
Wheels and Tires Wheel Size 16 x 6.00GS – 127
Tire Size 7.50 – 16 – 12PR
Type 12V, Negative Earth
Electrical Battery 12V x 2, Parallel connection
Alternator Capacity 12V – 100 Amps
Fuel Tank Capacity L 100
PERFORMANCE
GVW Rating kg 5,000
Max. Speed km/h 95
Performance
Gradeability (tan Ø) % 75.3
Model M550
1st 4.981
2nd 2.911
Transmission Ratio 3rd 1.556
4th 1.000
5th 0.738
Reverse 4.625
Model SH13
Rear Axle
Ratio 6.833
DIMENSION AND MASS
Chassis Mass Front Axle kg 1,420
(with standard tool Rear Axle kg 935
set and spare tire) Total kg 2,355
Wheelbase WB mm 3,380
Overall Length OL mm 6,026
Overall Width OW mm 1,945
Overall Height OH mm 2,165
Cab To Axle Center CA mm 2,900
Dimensions Front Overhang FOH mm 1,066
Rear Overhang ROH mm 1,470
Front Tread FT mm 1,455
Rear Tread RT mm 1,480
Turning Radius (on tire) mm 6,700
Seating Capacity 3
HINO MOTORS SALES (MALAYSIA) SDN.BHD. is engaged in an ongoing research and development program, and reserves the right to change specification without
prior notice in order to pass on to the customer any resulting advances or technical refinements. All specifications of the products are within normal manufacturing
allowances and tolerances.

HINO Authorized Dealer:

FW

TW
RT

FOH WB ROHF
OL

Ver. 01/03.2015
 POWERFUL ENGINE SAFETY
Tilt and Telescopic
Steering Column
Height and angle of steering
W04D - TR column is fully adjustable for any
favorite driving position.
Max Output 130 ps @ 2,700 rpm
Max Torque 363 Nm @ 1,800 rpm
Door Impact Beams
Power, Economical and Clean The side impact built into the
The lightweight, compact, high output direct doors of 300 Series increase
injection diesel fitted into W04D engine is among the level of protection for
the advanced engine technologies in Malaysia. driver and passenger in the
These clean-burning units deliver impressive power, event of a collision from
performance with plus unprecedented fuel efficiency the side.
and remarkably low emission.

Turbo Intercooler
4 Cyl. In-line direct Injection
Displacement : 4.009 Liter

FUEL ECONOMY
Aerodynamic
The windshield angle is optimized while the top
corners boast a more gradual curve, thereby
lowering the Cd (coefficient of drag) value, and Rear Axle
resulting in more efficient aerodynamics. The WU342R is using 13-inch
differential (GVMR over 8.5 ton),

DURABILITY which has also been used in

medium-duty trucks.
FUP (Front Under-run Protection)
HINO FRONT UNDERRUN PROTECTION is fitted RUP (Rear Under-run Protection)
as standard on all HINO trucks. The FUP prevents HINO REAR UNDERRUN PROTECTION is fitted as
Ultra - Strong Frame
vehicle from becoming wedged under the truck in standard on all HINO trucks. The RUP is protection system
WU342R is equipped with an ultra-strong 6mm thick
frontal collision and reduce serious injury. is the rear bumper for HINO truck. It is designed to prevent
frame, the sturdiest among the LCVs class. In adding
impacting vehicle from getting wedged under the truck.
maximum support, the WU342R is strengthened

APPLICATION
with a 3.2mm inner frame.

Body Length (ft)

HIGH COMFORTABILITY Model WU342

Standard 14.6

Optional 11.3 17.0 17.7

Cabin Interior
The 300 Series redefines driver comfort. The roomy inner Body Type
cab design shows a remarkably efficient use of space, with
plenty of room to take it easy. The high-roof cab offers the
most head clearance in its class, while the ample legroom
and sliding/reclining seat make driving or just relaxing
more comfortable. The 300 Series also offers a variety of
convenient.
Seat Belt
3 point ELR seat belt with pre-tensioner and 2 point seat
belt in center seat.
Tension is applied instantly upon collision to improve the
belts restraining performance. Note : Some images may be used for illustration purposes only.