2010 Volvo c30 37167
2010 Volvo c30 37167
2010 Volvo c30 37167
00 01 02
00 Introduction 01 Safety 02 Instruments and controls
General information.................................. 10 Occupant safety........................................ 16 Instrument overview.................................. 50
Volvo and the environment....................... 12 Seat belts.................................................. 18 Instrument panel....................................... 53
Important warnings................................... 13 Supplemental Restraint System............... 21 Indicator and warning symbols................. 55
Occupant Weight Sensor (OWS).............. 26 Symbols – instrument panel..................... 57
Side impact protection airbags................. 29 Information display................................... 60
Volvo Inflatable Curtain (VIC).................... 30 12-volt sockets......................................... 62
Whiplash Protection System..................... 32 Lighting panel........................................... 63
Crash mode.............................................. 34 Left-side steering wheel lever................... 65
Child safety............................................... 35 Trip computer........................................... 67
Child restraint systems............................. 37 Cruise control*.......................................... 69
Infant seats............................................... 39 Right-side steering wheel lever................. 71
Convertible seats...................................... 41 Steering wheel adjustment, Hazard warn-
Booster cushions...................................... 43 ing flashers................................................ 74
ISOFIX lower anchors............................... 44 Parking brake............................................ 75
Top tether anchors.................................... 45 Power windows......................................... 76
Child restraint registration and recalls...... 46 Mirrors....................................................... 77
Power moonroof*...................................... 80
Personal settings...................................... 82
HomeLink® Wireless Control System*..... 85
03 04 05
03 Climate 04 Interior 05 Locks and alarm
General information.................................. 90 Front seats.............................................. 102 Remote key and key blade..................... 122
Air vents.................................................... 92 Interior lighting........................................ 110 Keyless drive*.......................................... 127
Manual climate control.............................. 93 Storage compartments........................... 111 Locking and unlocking............................ 131
Electronic Climate Control (ECC)*............ 96 Rear seat................................................. 115 Alarm*..................................................... 132
Air distribution........................................... 99 Cargo area.............................................. 117
06 07 08
06 Starting and driving 07 Wheels and tires 08 Car care
General information................................ 138 General information................................ 170 Washing and cleaning the car................. 198
Fuel requirements................................... 142 Tire inflation............................................. 173 Paint touch up......................................... 202
Ignition switch......................................... 145 Inflation pressure—U.S. models ............ 175
Starting the vehicle................................. 146 Inflation pressure—Canadian models .... 176
Starting the vehicle with keyless drive*... 148 Tire designations..................................... 177
Manual transmission, 6-speed*.............. 149 Glossary of tire terminology.................... 179
Automatic transmission*......................... 150 Vehicle loading........................................ 180
Shiftlock override.................................... 152 Uniform tire quality gradings................... 181
Brake system.......................................... 153 Snow chains, snow tires, studded tires. . 182
Stability system....................................... 155 Temporary spare..................................... 183
Towing.................................................... 157 Wheel nuts.............................................. 184
Jump starting.......................................... 159 Changing a wheel................................... 185
Transporting loads.................................. 160 Tire Sealing System ............................... 187
Blind Spot Information System (BLIS)*... 161 Tire Pressure Monitoring System (TPMS) 193
Park assist*............................................. 165
09 10 11
09 Maintenance and servicing 10 Audio 11 Specifications
Volvo maintenance.................................. 206 Audio functions....................................... 236 Label information.................................... 262
Maintaining your car............................... 208 Radio functions....................................... 241 Dimensions and weights......................... 264
Hood....................................................... 210 CD player/CD changer............................ 249 Fuel, oils, and fluids................................ 267
Engine compartment............................... 211 Audio menu............................................. 253 Engine oil................................................ 269
Engine oil................................................ 212 Bluetooth® hands-free connection......... 254 Engine specifications.............................. 270
Fluids...................................................... 214 Electrical system..................................... 272
Wiper blades........................................... 216 Three-way catalytic converter................. 274
Battery..................................................... 217 Volvo programs....................................... 275
Replacing bulbs...................................... 219
Fuses...................................................... 227
7
Contents
12
12 Index
Index....................................................... 276
8
Contents
9
Introduction
General information
About this manual Contact your Volvo retailer for additional infor- WARNING
• Before you operate your vehicle for the first mation.
time, please familiarize yourself with the CALIFORNIA proposition 65
new-engine oil consumption information, NOTE Engine exhaust, some of its constituents,
see page 212. You should also be familiar and certain vehicle components contain or
with the information found in the chapters • All information, illustrations and specifi- emit chemicals known to the state of Cali-
"Instruments and controls", and "Starting cations contained in this manual are fornia to cause cancer, and birth defects or
and driving". based on the latest product information other reproductive harm. In addition, certain
available at the time of publication. fluids contained in vehicles and certain
• Information contained in the balance of the products of component wear contain or
manual is extremely useful and should be • Volvo reserves the right to make model
emit chemicals known to the State of Cali-
read after operating the vehicle for the first changes at any time, or to change spec- fornia to cause cancer, and birth defects or
time. ifications or design without notice and other reproductive harm.
without incurring obligation.
• The manual is structured so that it can be
used for reference. For this reason, it • Do not export your Volvo to another
country before investigating that coun- WARNING
should be kept in the vehicle for ready
access. try's applicable safety and emission Certain components of this vehicle such as
control requirements. In some cases it air bag modules, seat belt pretensioners,
Options and accessories may be difficult or impossible to comply adaptive steering columns, and button cell
Optional or accessory equipment described in with these requirements. Modifications batteries may contain Perchlorate material.
this manual is indicated by an asterisk. to the emission control system(s) may Special handling may apply for service or
render your Volvo not certifiable for vehicle end of life disposal.
Optional or accessory equipment may not be legal operation in the U.S., Canada and See www.dtsc.ca.gov/hazardouswaste/
available in all countries or markets. Please other countries. perchlorate.
note that some vehicles may be equipped dif-
ferently, depending on special legal require-
ments. WARNING Shiftlock (automatic transmission)
When your car is parked, the gear selector is
Optional or accessory equipment may not be If your vehicle is involved in an accident,
unseen damage may affect its driveability locked in the Park (P) position. To release the
available in all countries or markets. Please selector from this position, turn the ignition key
note that some vehicles may be equipped dif- and safety.
to position II (or start the engine), depress the
ferently, depending on special legal require- brake pedal, press the button on the front side
ments. of the gear selector and move the selector from
Park (P).
10
Introduction
General information
11
Introduction
Volvo is committed to the well being of its cus- is the next critical step in completing the life cator) light illuminates, or stays on after the
tomers. As a natural part of this commitment, cycle. The metal content is about 75% of the vehicle has started.
we care about the environment in which we all total weight of a vehicle, which makes the vehi- • Properly dispose of any vehicle-related
live. Caring for the environment means an cle among the most recycled industrial prod- waste such as used motor oil, used batter-
everyday involvement in reducing our environ- ucts. In order to have efficient and well-con- ies, brake pads, etc.
mental impact. Volvo's environmental activities trolled recycling, dismantling information is
• When cleaning your vehicle, please use
are based on a holistic view, which means we available for all Volvo models. For Volvo, all genuine Volvo car care products. All Volvo
consider the overall environmental impact of a homogeneous plastic parts weighing more car care products are formulated to be
product throughout its complete life cycle. In than 3.4 oz. (100 grams) are marked with inter- environmentally friendly.
this context, design, production, product use, national symbols that indicate how the com-
For additional information regarding the envi-
and recycling are all important considerations. ponent is to be sorted for recycling. In addition
ronmental activities in which Volvo Cars of
In production, Volvo has partly or completely to continuous environmental refinement of
North America, LLC and Volvo Car Corporation
phased out several chemicals including CFCs, conventional gasoline-powered internal com-
are involved, visit our Internet home page at:
lead chromates, asbestos, and cadmium; and bustion engines, Volvo is actively looking at
http://www.volvocars.us.
reduced the number of chemicals used in our advanced technology alternative-fuel vehicles.
plants 50% since 1991.
When you drive a Volvo, you become our part-
Volvo was the first in the world to introduce into ner in the work to lessen the car's impact on
production a three-way catalytic converter with the environment. To reduce your vehicle's
a Lambda sond, now called the heated oxygen environmental impact, you can:
sensor, in 1976. The current version of this
highly efficient system reduces emissions of
• Maintain proper air pressure in your tires.
Tests have shown decreased fuel econ-
harmful substances (CO, HC, NOx) from the omy with improperly inflated tires.
exhaust pipe by approximately 95 – 99% and
the search to eliminate the remaining emis- • Follow the recommended maintenance
schedule in your Warranty and Service
sions continues. Volvo is the only automobile
Records Information booklet.
manufacturer to offer CFC-free retrofit kits for
the air conditioning system of all models as far • Drive at a constant speed whenever pos-
back as the 1975 model 240. Advanced elec- sible.
tronic engine controls and cleaner fuels are • See a trained and qualified Volvo service
bringing us closer to our goal. After Volvo vehi- technician as soon as possible for inspec-
cles and parts have fulfilled their use, recycling tion if the check engine (malfunction indi-
12
Introduction
Important warnings
Accessory Installation Information booklet for more warranty cellular telephone use by a driver while the
• We strongly recommend that Volvo owners information. Volvo assumes no responsi- vehicle is moving.
install only genuine, Volvo-approved bility for death, injury, or expenses that • If your vehicle is equipped with a naviga-
accessories, and that accessory installa- may result from the installation of nonge- tion system, set and make changes to your
tions be performed only by a trained and nuine accessories. travel itinerary only with the vehicle parked.
qualified Volvo service technician. • Never program your audio system while
• Genuine Volvo accessories are tested to Driver distraction the vehicle is moving. Program radio pre-
ensure compatibility with the performance, • Driver distraction results from driver activ- sets with the vehicle parked, and use your
safety, and emission systems in your vehi- ities that are not directly related to control- programmed presets to make radio use
cle. Additionally, a trained and qualified ling the vehicle in the driving environment. quicker and simpler.
Volvo service technician knows where Your new Volvo is, or can be, equipped • Never use portable computers or personal
accessories may and may not be safely with many feature-rich entertainment and digital assistants while the vehicle is mov-
installed in your Volvo. In all cases, please communication systems. These include ing.
consult a trained and qualified Volvo serv- hands-free cellular telephones, navigation
ice technician before installing any acces- systems, and multipurpose audio systems. A driver has a responsibility to do everything
sory in or on your vehicle. You may also own other portable elec- possible to ensure his or her own safety and
tronic devices for your own convenience. the safety of passengers in the vehicle and oth-
• Accessories that have not been approved ers sharing the roadway. Avoiding distractions
by Volvo may or may not be specifically When used properly and safely, they enrich
the driving experience. Improperly used, is part of that responsibility.
tested for compatibility with your vehicle.
Additionally, an inexperienced installer any of these could cause a distraction.
may not be familiar with some of your vehi- • For all of these systems, we want to pro-
cle's systems. vide the following warning that reflects the
• Any of your vehicle's performance and strong Volvo concern for your safety:
safety systems could be adversely affec- • Never use these devices or any feature of
ted if you install accessories that Volvo has your vehicle in a way that distracts you
not tested, or if you allow accessories to be from the task of driving safely. Distraction
installed by someone unfamiliar with your can lead to a serious accident. In addition
vehicle. to this general warning, we offer the fol-
• Damage caused by unapproved or lowing guidance regarding specific newer
improperly installed accessories may not features that may be found in your vehicle:
be covered by your new vehicle warranty. • Never use a hand-held cellular telephone
See your Warranty and Service Records while driving. Some jurisdictions prohibit
13
Occupant safety...................................................................................... 16
Seat belts................................................................................................ 18
Supplemental Restraint System.............................................................. 21
Occupant Weight Sensor (OWS)............................................................. 26
Side impact protection airbags............................................................... 29
Volvo Inflatable Curtain (VIC).................................................................. 30
Whiplash Protection System................................................................... 32
Crash mode............................................................................................ 34
Child safety............................................................................................. 35
Child restraint systems........................................................................... 37
Infant seats.............................................................................................. 39
Convertible seats.................................................................................... 41
Booster cushions.................................................................................... 43
ISOFIX lower anchors............................................................................. 44
Top tether anchors.................................................................................. 45
G020871
Child restraint registration and recalls.................................................... 46
14
SAFETY
01
01 Safety
01 Occupant safety
Volvo's concern for safety • Never drink and drive. However, NHTSA cannot become
Safety is Volvo's cornerstone. Our concern • If you are taking any medication, consult involved in individual problems
dates back to 1927 when the first Volvo rolled your physician about its potential effects between you, your retailer, or Volvo
off the production line. Three-point seat belts on your driving abilities.
(a Volvo invention), safety cages, and energy-
Cars of North America, LLC. To con-
• Take a driver-retraining course. tact NHTSA, you may either call the
absorbing impact zones were designed into
Volvo cars long before it was fashionable or
• Have your eyes checked regularly. Auto Safety Hotline toll-free at
required by government regulation. • Keep your windshield and headlights 1-888-327-4236
clean.
We will not compromise our commitment to (TTY: 1-800-424-9153) or write to:
safety. We continue to seek out new safety
• Replace wiper blades when they start to
features and to refine those already in our cars.
leave streaks. NHTSA, U.S. Department of Trans-
You can help. We would appreciate hearing • Take into account the traffic, road, and portation, Washington D.C. 20590.
your suggestions about improving automobile weather conditions, particularly with
regard to stopping distance. You can also obtain other information
safety. We also want to know if you ever have
a safety concern with your car. Call us in the about motor vehicle safety from:
U.S. at: 1-800-458-1552 or in Canada at: Reporting safety defects in the U.S. http://www.safercar.gov
1-800-663-8255. If you believe that your vehicle has a Volvo strongly recommends that if
defect which could cause a crash or your vehicle is covered under a serv-
Occupant safety reminders could cause injury or death, you
How safely you drive doesn't depend on how
ice campaign, safety or emission
should immediately inform the recall or similar action, it should be
old you are but rather on:
National Highway Traffic Safety completed as soon as possible.
• How well you see. Administration (NHTSA) in addition to Please check with your local retailer
• Your ability to concentrate. notifying Volvo Cars of North Amer- or Volvo Cars of North America, LLC
• How quickly you make decisions under ica, LLC. If NHTSA receives similar
stress to avoid an accident. if your vehicle is covered under these
complaints, it may open an investiga- conditions.
The following suggestions are intended to help
tion, and if it finds that a safety defect
you cope with the ever changing traffic envi- NHTSA can be reached at:
ronment. exists in a group of vehicles, it may
order a recall and remedy campaign. Internet:
16
01 Safety
Occupant safety 01
http://www.nhtsa.gov
Telephone:
1-888-DASH-2-DOT
(1-888-327-4236).
17
01 Safety
01 Seat belts
Using seat belts tain impacts from the rear. The front seat belts • Make sure that the shoulder belt is rolled
also include a tension reducing device which, up into its retractor and that the shoulder
in the event of a collision, limits the peak forces and lap belts are taut.
exerted by the seat belt on the occupant.
Unbuckling the seat belt
Buckling a seat belt • To remove the seat belt, press the red sec-
Pull the belt out far enough to insert the latch tion on the seat belt receptacle. Before
plate into the receptacle until a distinct click is exiting the vehicle, check that the seat belt
heard. The seat belt retractor is normally retracts fully after being unbuckled. If nec-
"unlocked" and you can move freely, provided essary, guide the belt back into the retrac-
that the shoulder belt is not pulled out too far. tor slot.
G020104
NOTE WARNING
The seat belt is easiest to reach by grasping Never use a seat belt for more than one
it near the lower seat belt guide, not over the occupant. Never wear the shoulder portion
shoulder. of the belt under the arm, behind the back
Adjusting the seat belt or otherwise out of position. Such use could
cause injury in the event of an accident. As
Seat belts should always be worn by all occu- The retractor will lock up as follows: seat belts lose much of their strength when
pants of your vehicle. Children should be prop- exposed to violent stretching, they should
erly restrained, using an infant, car, or booster • if the belt is pulled out rapidly be replaced after any collision, even if they
seat determined by age, weight and height. • during braking and acceleration appear to be undamaged.
Volvo also believes no child should sit in the • if the vehicle is leaning excessively
front seat of a vehicle. • when driving in turns
Most states and provinces make it mandatory
When wearing the seat belt remember:
for occupants of a vehicle to use seat belts.
• The belt should not be twisted or turned.
Seat belt pretensioners • The lap section of the belt must be posi-
All seat belts are equipped with pretensioners tioned low on the hips (not pressing against
that reduce slack in the belts. These preten- the abdomen).
sioners are triggered in situations where the
front or side impact airbags deploy, and in cer-
18
01 Safety
Seat belts 01
G020106
G020105
• Do not use child safety seats or child
booster cushions/backrests in the front
passenger's seat. We also recommend
Seat belt guides (on both front seats)
that children who have outgrown these The seat belt should always be worn during
devices sit in the rear seat with the seat These guides are designed to help provide pregnancy. But it is crucial that it be worn in the
belt properly fastened. easier access to the seat belts. A belt can be correct way. The diagonal section should wrap
taken out of the guide and slid to the rearmost over the shoulder then be routed between the
part of the lower seat belt anchorage rod to breasts and to the side of the belly. The lap
make it easier for passengers to enter or exit section should lay flat over the thighs and as
the rear seat. low as possible under the belly. It must never
be allowed to ride upward. Remove all slack
from the belt and insure that it fits close to the
body without any twists.
As a pregnancy progresses, pregnant drivers
should adjust their seats and steering wheel
such that they can easily maintain control of the
vehicle as they drive (which means they must
be able to easily operate the foot pedals and
``
19
01 Safety
01 Seat belts
steering wheel). Within this context, they seat belts. The audible signal and warning light Seat belt maintenance
should strive to position the seat with as large will be on for a total of 6 seconds from the time Check periodically that the seat belts are in
a distance as possible between their belly and the ignition is switched on, regardless of good condition. Use water and a mild deter-
the steering wheel. whether or not the seat belts are fastened. gent for cleaning. Check seat belt mechanism
If the front seat belts are unbuckled while the function as follows: attach the seat belt and pull
Child seats vehicle is in motion, the audible signal and rapidly on the strap.
Please refer to page 37 for information on warning light will be active for a total of 6 sec-
securing child seats with the seat belts. onds.
Rear seats
Seat belt reminder The seat belt reminder in the rear seat has two
additional functions:
• It provides information about which seat
belts are fastened in the rear seat. A mes-
sage will appear in the information display
when a belt is being used. This message
will disappear after approximately 6 sec-
onds or can be erased by pressing the
READ button on the left steering wheel
lever.
• It also provides a reminder if one of the
occupants of the rear seat has unbuckled
his/her seat belt while the vehicle is in
G018084
20
01 Safety
Supplemental Restraint System (SRS) Where applicable, a text message will also be WARNING
displayed when the SRS warning light illumi-
nates. If this warning symbol is not functioning If your vehicle has been subjected to flood
properly, the general warning symbol illumi- conditions (e.g. soaked carpeting/standing
water on the floor of the vehicle) or if your
nates and either SRS AIRBAG SERVICE vehicle has become flood-damaged in any
URGENT or SRS AIRBAG SERVICE way, do not attempt to start the vehicle or
REQUIRED will be displayed. put the key in the ignition before discon-
necting the battery (see below). This may
WARNING cause airbag deployment which could result
in personal injury. Have the vehicle towed to
• If the SRS warning light stays on after a trained and qualified Volvo service tech-
the engine has started or if it illuminates nician for repairs.
while you are driving, have the vehicle Automatic transmission
inspected by a trained and qualified
G026330
Volvo service technician as soon as Before attempting to tow the vehicle, use
possible. the following procedure to override the
shiftlock system to move the gear selector
SRS warning light • Never try to repair any component or to the neutral position:
As an enhancement to the three-point seat part of the SRS yourself. Any interfer-
1. Switch off the ignition for at least
belts, your Volvo is equipped with a Supple- ence in the system could cause mal-
10 minutes and disconnect the battery.
function and serious injury. All work on
mental Restraint System (SRS). Volvo's SRS 2. Wait at least one minute.
these systems should be performed by
consists of seat belt pretensioners, front air-
a trained and qualified Volvo service 3. Insert the key in the ignition and turn it
bags, side impact airbags, the occupant
technician. to position II.
weight sensor, and inflatable curtains. All of
these systems are monitored by the SRS con- 4. Press firmly on the brake pedal.
trol module. An SRS warning light in the instru- 5. Move the gear selector from Park (P) to
ment panel (see the illustration) illuminates the Neutral (N) position, see page 152,
when the ignition key is turned to position I, II, for information on manually overriding
or III, and will normally go out after approxi- the shiftlock system.
mately 7 seconds if no faults are detected in
the system.
``
21
01 Safety
The front airbag system • The driver's side front airbag is folded and
located in the steering wheel hub.
• The passenger's side front airbag is folded
behind a panel located above the glove
compartment.
G020111
G015167
The front airbags supplement the three-point Location of the passenger's side front airbag
seat belts. For these airbags to provide the As the movement of the seats' occupants com-
protection intended, seat belts must be worn presses the airbags, some of the gas is expel-
at all times. led at a controlled rate to provide better cush-
The front airbag system includes gas genera- ioning. Both seat belt pretensioners also
tors surrounded by the airbags, and decelera- deploy, minimizing seat belt slack. The entire
tion sensors that activate the gas generators, process, including inflation and deflation of the
causing the airbags to be inflated with nitrogen airbags, takes approximately one fifth of a sec-
gas. ond.
The location of the front airbags is indicated by
SRS AIRBAG embossed on the steering wheel
pad and above the glove compartment, and by
decals on both sun visors and on the front and
far right side of the dash.
22
01 Safety
``
23
01 Safety
G032243
safety systems can also be damaged.
175 Gordon Baker Road • The smoke and dust formed when the
airbags are deployed can cause skin
North York, Ontario M2H 2N7 Airbag decal in the front passenger's door opening
and eye irritation in the event of pro-
1-800-663-8255 longed exposure.
www.volvocanada.com
24
01 Safety
WARNING WARNING
• Children must never be allowed in the • No objects or accessory equipment,
front passenger's seat. Volvo recom- e.g. dashboard covers, may be placed
mends that ALL occupants (adults and on, attached to, or installed near the air
children) shorter than 4 feet 7 inches bag hatch (the area above the glove
(140 cm) be seated in the back seat of compartment) or the area affected by
any vehicle with a passenger-side front airbag deployment.
airbag. See page 36 for guidelines. • There should be no loose articles, e.g.
• Occupants in the front passenger's seat coffee cups, on the floor, seat, or dash-
must never sit on the edge of the seat, board area.
sit leaning toward the instrument panel • Never try to open the airbag cover on
G032525 or otherwise sit out of position. the steering wheel or the passenger's
• The occupant's back must be as upright side dashboard. This should only be
as comfort allows and be against the done by a trained and qualified Volvo
Airbag decal on passenger's side dashboard seat back with the seat belt properly service technician.
fastened. • Failure to follow these instructions can
• Feet must be on the floor, e.g., not on result in injury to the vehicle occupants.
the dash, seat or out of the window.
G032934
25
01 Safety
Disabling the passenger's side front not inflate) the passenger's side front airbag The OWS uses a PASSENGER AIRBAG OFF
airbag under certain conditions. indicator lamp which will illuminate and stay on
to remind you that the passenger's side front
The OWS works with sensors that are part of
airbag is disabled. The PASSENGER AIRBAG
the front passenger's seat and seat belt. The
OFF indicator lamp is located in the overhead
sensors are designed to detect the presence of
2 console, near the base of the rearview mirror.
a properly seated occupant and determine if
the passenger's side front airbag should be
enabled (may inflate) or disabled (will not NOTE
inflate). When the ignition is switched on, the OWS
The OWS will disable (will not inflate) the pas- indicator light will go on for up to 10 seconds
while the system performs a self-diagnostic
senger's side front airbag when: test.
• the front passenger's seat is unoccupied,
or has small/medium objects in the front However, if a fault is detected in the system:
G018082
seat,
• the system determines that an infant is • The OWS indicator light will stay on
Occupant Weight Sensor (OWS) indicator light present in a rear-facing infant seat that is • The SRS warning light (see page 21) will
installed according to the manufacturer's come on and stay on
Volvo recommends that ALL occupants (adults instructions, The message PASS. AIRBAG OFF SERVICE
and children) shorter than 4 feet 7 inches
(140 cm) be seated in the rear seat of any vehi- • the system determines that a small child is URGENT will be displayed in the information
present in a forward-facing child restraint display.
cle with a passenger's side front airbag, and be
that is installed according to the manufac-
properly restrained. Children should always be turer's instructions,
seated in child restraints appropriate for their
size and weight. See also the child safety rec- • the system determines that a small child is
ommendations on page 35. present in a booster seat,
26
01 Safety
WARNING passenger's side front airbag is disabled (see sitting properly in the front passenger's seat.
the following table). The PASSENGER AIRBAG OFF indicator
If a fault in the system is detected and indi- lamp will be off and remain off.
cated as explained on the preceding page,
be aware that the passenger's side front air- Passenger's OWS indica- Passenger's If a person of adult size is sitting in the front
bag will not deploy in the event of a collision. seat occu- tor light sta- side front passenger's seat, but the PASSENGER
In this case, the SRS system and Occupant pancy status tus airbag sta- AIRBAG OFF indicator lamp is on, it is possible
Weight Sensor should be inspected by a tus that the person isn't sitting properly in the seat.
trained and qualified Volvo service techni-
If this happens:
cian as soon as possible. Seat unoc- OWS indica- Passenger's
cupied tor light side front 1. Turn the vehicle off and ask the person to
lights airbag disa- place the seatback in an upright position.
WARNING bled
up 2. Have the person sit upright in the seat,
• Never try to open, remove, or repair any centered on the seat cushion, with the per-
components in the OWS system. This Seat occu- OWS indica- Passenger's
son's legs comfortably extended.
could result in system malfunction. pied by low tor light side front
Maintenance or repairs should only be weight lights airbag disa- 3. Restart the vehicle and have the person
carried out by an a trained and qualified occupant/ up bled remain in this position for about two
Volvo service technician. objectA minutes. This will allow the system to
• The front passenger's seat should not detect that person and enable the pas-
Seat occu- OWS indica- Passenger's senger's frontal airbag.
be modified in any way. This could
reduce pressure on the seat cushion, pied by tor light side front
heavy occu- airbag ena- 4. If the PASSENGER AIRBAG OFF indicator
which might interfere with the OWS sys- is not
pant/object bled lamp remains on even after this, the person
tem's function. lit
should be advised to ride in the rear seat.
A Volvo recommends that children always be properly
restrained in appropriate child restraints in the rear seats. Do This condition reflects limitations of the OWS
The OWS is designed to disable (will not inflate) not assume that the passenger's side front airbag is disabled classification capability. It does not indicate
the passenger's side front airbag when a rear unless the PASSENGER AIRBAG OFF indicator lamp is lit.
Make sure the child restraint is properly installed. If there is OWS malfunction.
facing infant seat, a forward-facing child any doubt as to the status of the passenger's side front air-
restraint, or a booster seat is detected. The bag, move the child restraint to the rear seat.
Modifications
PASSENGER AIRBAG OFF indicator lamp will If you are considering modifying your vehicle in
The OWS is designed to enable (may inflate)
illuminate and stay on to remind you that the any way to accommodate a disability, for
the passenger's side front airbag anytime the
system senses that a person of adult size is example by altering or adapting the driver's or
``
27
01 Safety
28
01 Safety
G025315
or installed near the SIPS airbag system
or in the area affected by SIPS airbag
G020118
deployment.
SIPS airbag deployment
Location of the side impact (SIPS) airbag
• Never try to open or repair any compo-
nents of the SIPS airbag system. This
NOTE
As an enhancement to the structural side should be done only by a trained and
impact protection built into your car, the car is SIPS airbag deployment (one airbag) occurs qualified Volvo service technician.
also equipped with Side Impact Protection only on the side of the vehicle affected by
the impact. The airbags are not designed to • In order for the SIPS airbag to provide
System (SIPS) airbags. its best protection, both front seat
deploy in all side impact situations.
The SIPS airbag system is designed to help occupants should sit in an upright posi-
increase occupant protection in the event of tion with the seat belt properly fastened.
Components in the SIPS airbag system
certain side impact collisions. The SIPS air- • Failure to follow these instructions can
This SIPS airbag system consists of gas gen- result in injury to the occupants of the
bags are designed to deploy only during cer-
erators and side airbag modules built into the vehicle in the event of an accident.
tain side-impact collisions, depending on the
outboard sides of both front seat backrests.
crash severity, angle, speed and point of
impact.
29
01 Safety
G007478
This system consists of inflatable curtains NOTE WARNING
located along the sides of the roof liners,
stretching from the center of both front side If the inflatable curtain deploys, it remains • The VIC system is a supplement to the
windows to the rear edge of the rear side door inflated for approximately 3 seconds. Side Impact Protection System. It is not
windows. It is designed to help protect the designed to deploy during collisions
heads of the occupants of the front and rear from the front or rear of the car or in roll-
over situations.
seats in certain side impact collisions.
• Never try to open or repair any compo-
In certain side impacts, both the Inflatable Cur- nents of the VIC system. This should be
tain (VIC) and the Side Impact Airbag System done only by a trained and qualified
(SIPS airbag) will deploy. The VIC and the SIPS Volvo service technician.
airbag deploy simultaneously.
• Never hang heavy items from the ceiling
handles. This could impede deployment
of the Inflatable curtain.
30
01 Safety
WARNING
In order for the VIC to provide its best pro-
tection, all occupants of the vehicle should
sit in an upright position with the seat belt
properly fastened; adults using the seat belt
and children using the proper child restraint
system. Only adults should sit in the front
seats. Children must never be allowed in the
front passenger's seat, see page 36 for
guidelines. Failure to follow these instruc-
tions can result in injury to the vehicle occu-
pants in an accident.
31
01 Safety
G020347
The WHIPS system consists of specially WARNING WARNING
designed hinges and brackets on the front seat
backrests designed to help absorb some of the • The WHIPS system is designed to sup- • Occupants in the front seats must never
energy generated in a collision from the rear plement the other safety systems in sit out of position. The occupant's back
(when the vehicle is "rearended"). your car. For this system to function must be as upright as comfort allows
properly, the three-point seat belt must and be against the seat back with the
In the event of a collision of this type, the hinges be worn. Please be aware that no sys- seat belt properly fastened.
and brackets of the front seat backrests are tem can prevent all possible injuries that
designed to change position slightly to allow
• If your car has been involved in a rear-
may occur in an accident. end collision, the front seat backrests
the backrest/head restraint to help support the • The WHIPS system is designed to func- must be inspected by a trained and
occupant's head before moving slightly rear- tion in certain collisions from the rear, qualified Volvo service technician, even
ward. This movement helps absorb some of depending on the crash severity, angle if the seats appear to be undamaged.
the forces that could result in whiplash. and speed.
32
01 Safety
G020125
WARNING
•
G020126
33
01 Safety
01 Crash mode
Driving after a collision fuel lines, sensors for one of the safety sys- 3. Try to start the vehicle.
tems, the brake system, etc.
Moving the vehicle
WARNING If the electrical system is able to reset system
status to normal (CRASH MODE SEE
• Never attempt to repair the vehicle MANUAL will no longer be displayed), the
yourself or to reset the electrical system vehicle may be moved carefully from its pres-
after the vehicle has displayed CRASH ent position, if for example, it is blocking traffic.
MODE SEE MANUAL. This could It should, however, not be moved farther than
result in injury or improper system func- is absolutely necessary.
tion.
• Restoring the vehicle to normal operat- WARNING
ing mode should only be done by a
trained and qualified Volvo service tech- Even if the vehicle appears to be drivable
G026363
34
01 Safety
Child safety 01
Children should be seated safely restrained to help reduce the chance of injuring When a child has outgrown the child safety
Volvo recommends the proper use of restraint or increasing the injury of a child. seat, you should use the rear seat with the
systems for all occupants including children. standard seat belt fastened. The best way to
All states and provinces have legislation gov-
Remember that, regardless of age and size, a help protect the child here is to place the child
erning how and where children should be car-
child should always be properly restrained in a on a cushion so that the seat belt is properly
ried in a car. Find out the regulations existing
car. located on the hips (see the illustration on page
in your state or province. Recent accident sta-
43). Legislation in your state or province may
Your car is also equipped with ISOFIX/LATCH tistics have shown that children are safer in rear
mandate the use of a child seat or cushion in
attachments, which make it more convenient seating positions than front seating positions
combination with the seat belt, depending on
to install child seats. when properly restrained. A child restraint sys-
the child's age and/or size. Please check local
tem can help protect a child in a vehicle. Here's
Some restraint systems for children are regulations.
what to look for when selecting a child restraint
designed to be secured in the vehicle by lap system: A specially designed and tested booster cush-
belts or the lap portion of a lap-shoulder belt. ion can be obtained from your Volvo retailer.
Such child restraint systems can help protect • It should have a label certifying that it
children in cars in the event of an accident only meets applicable Federal Motor Vehicle USA: for children weighing 33–80 lbs. (15–
if they are used properly. However, children Safety Standards (FMVSS 213) – or in Can- 36 kg) and 38–54 inches (97–137 cm) in height
could be endangered in a crash if the child ada, CMVSS 213.
Canada: for children weighing 40–80 lbs. (18–
restraints are not properly secured in the vehi- • Make sure the child restraint system is 36 kg) and 40–54 inches (102–137 cm) in height
cle. Failure to follow the installation instructions approved for the child's height, weight and
for your child restraint can result in your child development – the label required by the
standard or regulation, or instructions for WARNING
striking the vehicle's interior in a sudden stop.
infant restraints, typically provide this infor- Do not use child safety seats or child
Holding a child in your arms is NOT a suitable mation. booster cushions/backrests in the front
substitute for a child restraint system. In an passenger's seat. We also recommend that
accident, a child held in a person's arms can
• In using any child restraint system, we urge children under 4 feet 7 inches (140 cm) in
you to carefully look over the instructions
be crushed between the vehicle's interior and height who have outgrown these devices sit
that are provided with the restraint. Be sure in the rear seat with the seat belt fastened.
an unrestrained person. The child could also be you understand them and can use the
injured by striking the interior, or by being ejec- device properly and safely in this vehicle.
ted from the vehicle during a sudden maneuver A misused child restraint system can result
or impact. The same can also happen if the in increased injuries for both the infant or
infant or child rides unrestrained on the seat. child and other occupants in the vehicle.
Other occupants should also be properly
``
35
01 Safety
01 Child safety
Automatic Locking Retractor/ WARNING Volvo recommends that you do not dis-
Emergency Locking Retractor (ALR/ connect the airbag system in your vehicle.
Do not use child safety seats or child
ELR) booster cushions/backrests in the front • Volvo strongly recommends that everyone
To make child seat installation easier, each passenger's seat. We also recommend that in the vehicle be properly restrained.
seat belt (except for the driver's belt) is equip- children who have outgrown these devices • Volvo recommends that ALL occupants
ped with a locking mechanism to help keep the sit in the rear seat with the seat belt properly (adults and children) shorter than 4 feet
seat belt taut. fastened. 7 inches (140 cm) be seated in the back
seat of any vehicle with a front passenger
When attaching the seat belt to a child side airbag.
Volvo's recommendations
seat: Why does Volvo believe that no child should sit • Drive safely!
1. Attach the seat belt to the child seat in the front seat of a car? It's quite simple really.
according to the child seat manufacturer's A front airbag is a very powerful device
instructions. designed, by law, to help protect an adult.
2. Pull the seat belt out as far as possible. Because of the size of the airbag and its speed
3. Insert the seat belt latch plate into the of inflation, a child should never be placed in
buckle (lock) in the usual way. the front seat, even if he or she is properly bel-
ted or strapped into a child safety seat. Volvo
4. Release the seat belt and pull it taut around
has been an innovator in safety for over sev-
the child seat.
enty-five years, and we'll continue to do our
A sound from the seat belt retractor will be part. But we need your help. Please remember
audible at this time and is normal. The belt will to put your children in the back seat, and
now be locked in place. This function is auto- buckle them up.
matically disabled when the seat belt is
unlocked and the belt is fully retracted. Volvo has some very specific
recommendations:
• Always wear your seat belt.
• Airbags are a SUPPLEMENTAL safety
device which, when used with a three-
point seat belt can help reduce serious
injuries during certain types of accidents.
36
01 Safety
Child restraints
G026320
G026321
G026319
``
37
01 Safety
WARNING
• When not in use, keep the child restraint
system secured or remove it from the
passenger compartment to help pre-
vent it from injuring passengers in the
event of a sudden stop or collision.
• A small child's head represents a con-
siderable part of its total weight and its
neck is still very weak. Volvo recom-
mends that children up to age 4 travel,
properly restrained, facing rearward. In
addition, Volvo recommends that chil-
dren should ride rearward facing, prop-
erly restrained, as long as possible.
38
01 Safety
Infant seats 01
Securing an infant seat with a seat belt 1. Place the infant seat in the rear seat of the
vehicle.
G026323
G026417
G026322
Fasten the seat belt
Do not place the infant seat in the front passeng-
er's seat Positioning the seat belt through the infant seat WARNING
2. Attach the seat belt to the infant seat A child seat should never be used in the
NOTE front passenger seat of any vehicle with a
according to the manufacturer's instruc-
Refer to pages 44–45 for information on front passenger airbag – not even if the
tions. "Passenger airbag off" symbol near the
securing a child restraint using ISOFIX lower
anchors and/or top tether anchorages. rear-view mirror is illuminated (on vehicles
equipped with Occupant Weight Sensor). If
the severity of an accident were to cause the
WARNING airbag to inflate, this could lead to serious
injury or death to a child seated in this posi-
• An infant seat must be in the rear-facing tion.
position only.
• The infant seat should not be positioned 3. Fasten the seat belt by inserting the latch
behind the driver's seat unless there is plate into the buckle (lock) until a distinct
adequate space for safe installation. click is audible.
``
39
01 Safety
01 Infant seats
G026324
G026325
Pull out the shoulder section of the seat belt
4. Pull the shoulder section of the seat belt
out as far as possible to activate the belt's Ensure that the seat is securely in place
automatic locking function.
WARNING
NOTE It should not be possible to move the child
The locking retractor will automatically restraint more than 1 in. (2.5 cm) in any
release when the seat belt is unbuckled and direction.
allowed to retract fully.
6. Push and pull the infant seat to ensure that
5. Press the infant seat firmly in place, let the it is held securely in place by the seat belt.
seat belt retract and pull it taut. A sound
7. The infant seat can be removed by unbuck-
from the seat belt retractor's automatic
ling the seat belt and letting it retract com-
locking function will be audible at this time
pletely.
40
01 Safety
Convertible seats 01
WARNING
• Convertible child seats should be instal-
led in the rear seat only.
G026420
G026320
NOTE 1. Place the convertible seat in the rear seat
of the vehicle.
Refer to pages 44–45 for information on Route the seat belt through the convertible seat
securing a child restraint using ISOFIX lower
anchors and/or top tether anchorages.
``
41
01 Safety
01 Convertible seats
NOTE WARNING
The locking retractor will automatically It should not be possible to move the child
release when the seat belt is unbuckled and restraint more than 1 in. (2.5 cm) in any
allowed to retract fully. direction.
5. Press the convertible seat firmly in place, The convertible seat can be removed by
let the seat belt retract and pull it taut. A unbuckling the seat belt and letting it retract
sound from the seat belt retractor's auto- completely.
matic locking function will be audible at this
time and is normal. The seat belt should
now be locked in place.
G026326
G026328
click is audible.
4. Pull the shoulder section of the seat belt
out as far as possible to activate the belt's Ensure that the seat is securely in place
G026327
automatic locking function.
42
01 Safety
Booster cushions 01
43
01 Safety
Using the ISOFIX lower child seat 3. Fasten the attachment on the child
anchors restraint's lower straps to the ISOFIX lower
anchors.
4. Firmly tension the lower child seat straps
according to the manufacturer's instruc-
tions.
NOTE
• Always follow your child seat manufac-
turer's installation instructions, and use
both ISOFIX lower anchors and top
G031682
G009182
tethers whenever possible.
44
01 Safety
WARNING
• Never route a top tether strap over the
top or around the head restraint. It
should always be routed under the head
restraint.
• Child restraint anchorages are designed
to withstand only those loads imposed
by correctly fitted child restraints. Under
G015719
no circumstances are they to be used
for adult seat belts or harnesses. The
G015718
45
01 Safety
46
01 Safety
01
47
Instrument overview................................................................................ 50
Instrument panel..................................................................................... 53
Indicator and warning symbols............................................................... 55
Symbols – instrument panel.................................................................... 57
Information display.................................................................................. 60
12-volt sockets....................................................................................... 62
Lighting panel.......................................................................................... 63
Left-side steering wheel lever................................................................. 65
Trip computer.......................................................................................... 67
Cruise control*........................................................................................ 69
Right-side steering wheel lever............................................................... 71
Steering wheel adjustment, Hazard warning flashers............................. 74
Parking brake.......................................................................................... 75
Power windows....................................................................................... 76
Mirrors..................................................................................................... 77
Power moonroof*.................................................................................... 80
Personal settings.................................................................................... 82
G020901
HomeLink® Wireless Control System*................................................... 85
02
02 Instruments and controls
Instrument overview
02
G019492
50
02 Instruments and controls
Instrument overview
Steering wheel adjustment Courtesy lighting switch Position for optional equipment
02
Hood opener Driver's side reading light Position for optional equipment
``
Instrument overview
G017449
Power windows
52
02 Instruments and controls
Instrument panel
Instrument panel
1 2 3 4 5 6 7 02
G031465
8 9 10 11 12 13 14
Speedometer the temperature readings may be slightly sively high engines speeds. This will be
higher than the actual ambient tempera- noticeable as a pronounced unevenness in
Turn signal, left ture. engine speed.
Warning symbol – See the following pages Information symbol – See the following Indicator and information symbols
for additional information. pages for additional information.
Fuel gauge, see page 267 for fuel tank vol-
Information display – The display presents Turn signal, right ume. When a warning light in the gauge
information and warning messages, the comes on, the vehicle should be refueled
ambient temperature, clock, etc. When the Tachometer – Shows engine speed in
thousands of revolutions per minute (rpm). as soon as possible, see page 67 for
ambient temperature is between 23 °F and more information on fuel level and con-
36 °F (–5 °C and +2 °C), a snowflake sym- Do not drive continuously with the needle
in the red area of the dial, which indicates sumption in the "Trip computer” section.
bol is shown in the display. This symbol
serves as a warning for possible slippery maximum allowable engine rpm range. High beam indicator
road surfaces. Please note that this symbol Instead, shift to a higher gear or slow the
vehicle down. The engine management Function display – This window displays
does not indicate a fault with your car. At information on functions such as the
low speeds, or when the car is not moving, system will automatically prevent exces-
``
53
02 Instruments and controls
Instrument panel
54
02 Instruments and controls
Function check Symbols in the center of the instrument If the red warning symbol lights up:
The indicator and warning symbols1 light up panel 1. Stop the car as soon as possible in a suit- 02
when you turn the ignition key or the optional able location.
keyless drive start control to the driving posi-
2. Read the message in the information dis-
tion (position II) before starting. This shows that
play.
the symbols are functioning.
3. Follow the instructions provided, or con-
When the engine starts, all sym-
tact a trained and qualified Volvo service
bols go out. If the engine is not
technician. Erase the message by pressing
started within 5 seconds, all of the
READ, see page 60.
symbols except the malfunction
indicator light (CHECK ENGINE) Information symbol
and the oil pressure warning light The yellow information symbol
will go out. Certain symbols may lights up to alert the driver to a
not have their functions illustrated, depending
G026365
message in the information dis-
on the car's equipment. play. This symbol illuminates when
The PARK BRAKE symbol will not go out until the vehicle is traveling at speeds
the parking brake has been released. below 5 mph (7 km/h).
Warning symbol
The red warning symbol lights up The message can be erased by pressing the
to indicate a fault that could affect READ button, see page 60, or will disappear
the car's drivability.This symbol automatically (the length of time required for
illuminates when the vehicle is the message to disappear varies, depending
traveling at speeds above 5 mph on the function indicated).
(7 km/h). A text explaining the nature of the fault When the message "TIME FOR REGULAR
will also be shown in the information display.
SERVICE" is displayed, the text can be erased
The symbol and accompanying text will remain
and the information symbol light can be turned
on until the fault has been corrected. This sym-
off by pressing the READ button. The text will
bol may also light up in combination with other
disappear and the symbol light will go out auto-
indicator or warning symbols.
matically after two minutes.
1 On certain engines, the symbol for low oilpressure is not used. Instead, a text warning is provided in the information display, see page 212.
``
55
02 Instruments and controls
56
02 Instruments and controls
Symbols – left side A CHECK ENGINE light may have many cau- 3. Rear fog light
ses. Sometimes, you may not notice a change This symbol indicates that the rear
in your car's behavior. Even so, an uncorrected fog light (located in the driver's 02
condition could hurt fuel economy, emission side taillight cluster) is on.
controls, and drivability. Extended driving with-
out correcting the cause could even damage
other components in your car. 4. Stability system DSTC
This indicator symbol flashes when
NOTE the DSTC (Dynamic Stability and
Canadian models are equipped with the Traction control system) is actively
second symbol. working to stabilize the car, see
page 155 for more detailed infor-
mation.
2. Anti-lock Brake system (ABS)
G026439
If the warning light comes on, there 5. Tire Pressure Monitoring System
is a malfunction of the ABS system This system monitors inflation
(the standard braking system will pressure in the tires. See page
1. Malfunction indicator light still function). 193 for more information.
The vehicle should be driven to a
trained and qualified Volvo service
As you drive, a computer called technician for inspection, see 6. Fuel level warning light
On-Board Diagnostics II (OBDII) page 153 for additional informa- When this light comes on, the vehi-
monitors your car's engine, trans- tion. cle should be refueled as soon as
mission, electrical and emission possible.
systems.
NOTE
The CHECK ENGINE light will light up if the
Canadian models are equipped with the
computer senses a condition that potentially second symbol.
may need correcting. When this happens,
please have your car checked by a trained and
qualified Volvo service technician as soon as
possible.
``
57
02 Instruments and controls
1 On certain engines, this symbol is not used to indicate low oil pressure. Instead, a text warning is provided in the information display, see also page 212.
58
02 Instruments and controls
4. If both lights remain on after the engine has Hood and liftgate
been restarted, switch off the engine again If the hood and/or liftgate is not
and check the brake fluid level, see completely closed, the Information
page 211 for the location of the reservoir. symbol in the instrument panel will
light up and a message will be dis-
played, regardless of the vehicle's
speed.
59
02 Instruments and controls
Information display
HIGH ENGINE Stop the vehicle in a TIME FOR This message is affec-
TEMP STOP safe place and switch REGULAR ted by the number of
When an indicator or warning light in the instru- SAFELY off the engine to help MAINTE- miles/km driven, by the
ment panel comes on, a message is also prevent the risk of seri- NANCE number of months, or
shown in the information display. To read a ous damage. by the number of engine
message: hours since the service
SERVICE Take your car to a reminder was reset at
1. Press the READ button (1).
URGENTA trained and qualified the most recent regu-
2. Pressing READ repeatedly enables you to Volvo service techni- larly scheduled service.
scroll to any other messages that may be cian for inspection
stored. immediately. MAINTE- If the vehicle is not serv-
NANCE OVER- iced according to
SEE MANUALA Refer to your owner's DUE schedule, the warranty
manual. For additional may not apply to dam-
information, please aged parts, etc.
contact your Volvo
retailer.
60
02 Instruments and controls
Information display
Message Meaning
TIME FOR This message is affec- 02
REGULAR ted by the number of
MAINTE- miles/km driven, by the
NANCE number of months, or
by the number of engine
hours since the service
reminder was reset at
the most recent regu-
larly scheduled service.
61
02 Instruments and controls
12-volt sockets
Auxiliary equipment
The buttons to the left of the 12-volt socket can
be used for Volvo-installed optional or auxiliary
equipment.
Ashtrays/cigarette lighter
The auxiliary socket can also be used for a cig-
G029082
arette lighter1, and ashtrays, which can be pur-
chased from your Volvo retailer.
1 Accessory.
62
02 Instruments and controls
Lighting panel
Parking lights
G026415
Brake lights
The brake lights come on automatically when
Daytime running lights. High
the brakes are applied.
Light switch beams and high beam flash can
be used in this position.
Thumb wheel for adjusting brightness of Fog lights
instrument lighting
The front and rear parking lights can be turned Front fog lights*
Daytime running lights
on even when the ignition is switched off. The front fog lights can be used in combination
To unlock the fuel filler door with either the headlights or the parking lights.
Turn switch (1) to the parking light position.
Rear fog light 1. Turn the ignition key to position II.
The license plate lights also illuminate when the
parking lights are switched on. 2. Press button (3) to turn on the front fog
lights.
An indicator light in the button illuminates when
the front fog lights are on.
1 On Canadian models, the daytime running lights will remain on with the light switch in this position.
``
Lighting panel
64
02 Instruments and controls
1 Factory setting.
``
65
02 Instruments and controls
66
02 Instruments and controls
Trip computer
``
67
02 Instruments and controls
Trip computer
NOTE
Trip computer readings may vary slightly
depending on the circumference of the tires
on the car, tire inflation, or driving style.
68
02 Instruments and controls
Cruise control*
G031667
• Press 0 to temporarily disengage cruise
control.
The cruise control buttons are located on the Use + or – in the following ways to increase or CRUISE will appear in the function display.
left side of the steering wheel hub. decrease the vehicle's speed: The currently set speed is stored in the sys-
tem's memory.
1. Press and hold down + or – until the vehicle
NOTE reaches the desired speed. This will
This does not set the vehicle's speed. become the set speed when the button is Cruise control is also automatically
released. disengaged:
1. Press the CRUISE button. CRUISE will 2. Press + or – for approximately a half sec- • If the speed drops below approximately
ond and release the button to increase or 20 mph (30 km/h) when driving uphill.
appear in the function display in the center
of the instrument panel. decrease vehicle speed by approximately • When the brake or clutch pedal is
1 mph (1.6 km/h). depressed.
2. Press + or – to set the current speed.
CRUISE ON will be displayed. • If the gear selector is moved to posi-
tion N.
``
Cruise control*
WARNING
Cruise control should not be used in heavy
traffic or when driving on wet or slippery
roads. Cruise control may not maintain set
speed on steep downgrades.
Parking lights on
Optional Dual Xenon headlights will be washed
once for every five times the windshield is
washed.
Normal halogen headlights will not be washed.
``
71
02 Instruments and controls
– Rain sensor* 3. Press button B (see page 71). The rain sen- – Thumb wheel
sor symbol will appear in the lower display. The thumb wheel is used to set the wiper inter-
02
Manual deactivation val when intermittent wiping is selected, or the
sensitivity to the amount of rain on the wind-
The rain sensor can be deactivated by:
shield when the rain sensor is selected. Move
Pressing button (B). the wheel upward or downward to increase/
or decrease wiper speed when the intermittent
function is selected, or to increase/decrease
Moving the windshield wiper lever down. the optional rain sensor's sensitivity when the
this function is activated.
NOTE
The rain sensor function will remain acti- – Liftgate wiper/washer
vated if the lever is briefly moved up to acti-
G031469
73
02 Instruments and controls
Steering wheel adjustment Check that the steering wheel is locked in the 2. Press the button again to turn off the flash-
new position. ers.
02
WARNING NOTE
Never adjust the steering wheel while driv- • Regulations regarding the use of the
ing. hazard warning flasher may vary,
depending on where you live.
G027308
G020144
2. Adjust the steering wheel to a suitable
position.
3. Press the lever back into place to lock the The four-way flasher should be used to indi-
steering wheel in the new position. If nec- cate that the vehicle has become a traffic haz-
essary, press the steering wheel slightly ard.
while pressing the lever into the locked 1. Press the triangular button in the center
position. dash.
74
02 Instruments and controls
Parking brake
Parking brake (hand brake) 4. If the vehicle rolls, the parking brake lever
must be pulled more firmly.
02
5. When parking a vehicle always put the gear
selector in first gear (for manual transmis-
sion) or P (for automatic transmission).
Parking on a hill
• If the vehicle is pointing uphill, turn the front
wheels so that they point away from the
curb.
• If the vehicle is pointing downhill, turn the
front wheels so that they point toward the
curb.
G026348
75
02 Instruments and controls
Power windows
Operation Opening a window stop the window at any time, press the
Lightly press down the front edge of either of button down.
02 the buttons (A) to the first detent ("stop") to
open a window to the position of your choice. Power window control – front
passenger's side
WARNING
• Always remove the ignition key when
the vehicle is unattended.
• Never leave children unattended in the
vehicle.
• Make sure that the windows are com-
pletely unobstructed before they are
G018240
operated.
Control panel in driver's door 1. Press the front part of any of the buttons
(A) as far down as possible and release to
Power window controls
G019511
automatically open the window com-
The power windows are controlled by buttons pletely.
in the arm rests.
2. To stop the window at any time, pull the
• The ignition must be ON (ignition key in button up. The control for the power window in the front
position I, II or the engine running) for the passenger's door operates that window only.
power windows to function. Closing a window
1. Lightly pull up the front edge of any of the
• The power windows will also function after
the ignition has been switched off as long buttons (A) to the first detent ("stop") to
as neither of the front doors has been close a window to the position of your
opened. choice.
2. Pull the front part of any of the buttons (A)
up as far as possible and release to auto-
matically close the window completely. To
76
02 Instruments and controls
Mirrors
G031045
G029930
Day/night control The upper right-hand corner of the rearview The earth is divided into 15 magnetic zones.
mirror has an integrated display that shows the The compass is initially set for the zone to
Normal position
compass direction toward which the car is which the car was delivered, and should
Night position, reduces glare from follow- pointing. Eight different directions can be dis- always be adjusted if the car is driven to a new
ing traffic played: N, NE, E, SE, S, SW, W and NW. The magnetic zone. A "C" will be displayed if cali-
display shows your car's orientation with bration becomes necessary.
Night position respect to true north. To calibrate the compass:
To reduce glare from the headlights of follow-
ing vehicles, use control (1) to switch between 1. Stop the car in a large, open area, away
the normal and night-driving positions. from traffic.
``
Mirrors
Power door mirrors Use this control to adjust the driver's door
mirror.
02
Passenger's door mirror:
1. Press the R switch (a light in the switch will
go on) to activate the adjustment control.
Use this control to adjust the passenger's
door mirror.
2. After you have adjusted the mirror(s), press
the L or R switch again (the LED will go out)
to deactivate the adjustment control.
G026409
Storing the mirrors' position
G018250
The position of the door mirrors is stored when
the vehicle is locked. The next time the driver's
Magnetic zones
door is unlocked with the same remote key and
3. Press button (1) for at least 3 seconds to The mirror control switches are located on the that door is opened within 2 minutes, the
display the number of the current magnetic driver's door armrest.
optional power driver's seat and side door mir-
zone. rors will automatically move to the position that
4. Press button (1) repeatedly until the num- Adjusting the mirrors they were in when the doors were most
ber for the required geographical area (1– recently locked with the same remote key.
15) is displayed. "C" will be displayed WARNING
Folding power door mirrors*
again. • The mirrors should always be adjusted The mirrors can be folded in for parking/driving
5. Drive slowly in a circle at a maximum speed prior to driving. in narrow spaces.
of 6 mph (10 km/h) until a compass direc- • Objects seen in the passenger's side
Folding the mirrors in
tion is displayed. wide-angle door mirror are closer than
they appear to be. 1. Press down the L and R mirror control but-
Calibration is complete. tons on the driver's door at the same time.
Mirrors
Folding the mirrors out 1. Fold in the mirrors by pressing the L and
Fold out the mirrors by pressing down the L R mirror control buttons on the driver's
and R buttons at the same time. The mirrors door at the same time. 02
automatically fold out to the fully extended 2. Fold them out again by pressing the L and
position. R mirror control buttons.
Automatic folding This returns the mirrors to their original (neutral)
When the vehicle is locked/unlocked with the
positions.
remote key or with the optional keyless drive
system (see page 127), the power door mirrors Blind Spot Information System (BLIS)*
with automatically fold in or out. The Blind Spot Information System (BLIS) is an
information system that indicates the presence
NOTE of another vehicle in the side-view mirror's
The door mirrors will not fold out automati- "blind area." See page 161 for detailed infor-
cally when the vehicle is unlocked if they mation.
were folded in using the buttons on the driv-
er's door control panel.
Power moonroof*
G029222
opened to the position of your choice.
G007503
Power moonroof*
CAUTION Visor
• Remove ice and snow before opening 02
the moonroof.
• Do not operate the moonroof if it is fro-
zen closed.
• Never place heavy objects on the
moonroof.
WARNING
• If the moonroof is obstructed during
auto-close operation, it will automati-
G020157
cally reverse direction and return to its
starting position.
• During manual closing, if the moonroof
is obstructed, immediately open it The optional moonroof features a sliding visor.
again. The visor slides open automatically when the
moonroof is opened, and must be closed man-
ually.
WARNING
• Never open or close the moonroof if it is
obstructed in any way.
• Never allow a child to operate the
moonroof.
• Never extend any object or body part
though the open moonroof, even if the
vehicle's ignition is completely
switched off.
• Never leave a child alone in a vehicle.
Personal settings
Control panel Personal settings can be made for some of the 2. Select hour(s) or minute(s) to be changed
car's functions, such as the central locking with the left/right arrow keys.
02 system, climate control, and the audio system.
3. Press ENTER to start the clock.
Please refer to page 237 for more information
on the audio functions that can be adjusted.
The settings are presented in the display (A). NOTE
A If you are currently using the 12-hour time
To access the menu and adjust settings setting, use the up/down arrow keys to
1. Press MENU (B). select AM/PM after the minute-setting has
been adjusted.
2. Scroll to Car Settings using the menu nav-
igation control (E).
Lock confirmation light
3. Press ENTER (D).
When the car is locked/unlocked with the
E B
4. Select an alternative using the menu navi- remote key, the direction indicators can be
D C gation control (E). selected to flash to confirm the action. The
alternatives On/Off are available for both lock-
5. Confirm your selection by pressing
ing and unlocking.
ENTER.
Autolock
To exit the menu
When the car starts to move, the doors and
Press EXIT (C).
G026307
82
02 Instruments and controls
Personal settings
• Global (All doors) – unlocks all doors and Temporarily turning off the alarm Information
the liftgate with one press on the remote sensor(s) • VIN number – The VIN (Vehicle Identifica-
key. tion Number) is the car's unique identity 02
The alarm sensors can be temporarily turned
• Two Step (Two-stage unlocking) – This off (if, for example, a person or a pet remains number.
alternative unlocks the driver's door with in the vehicle when the doors are locked from • Number of Keys – the number of keys reg-
one press on the remote key. A second outside with the remote key). There are two istered for the car is displayed here.
press unlocks the passenger's door and alternatives:Activate once and Ask on exit,
the liftgate. see page 122 and 132. Climate functions
• Blower speed in AUTO mode – the blower
Automatically folding the door mirrors Approach lighting speed can be set to AUTO mode in models
The setting makes it possible to automatically This alternative determines the length of time equipped with ECC. Choose between
fold the door mirrors in or out when the vehicle for which the car's lights will remain on when "Low", "Normal" and "High".
is locked or unlocked. See page 78. the Approach light button on the central lock- • Timer for recirculation – when the timer is
ing system's remote key is pressed. Intervals active, the air recirculates in the car for
Operating side windows
of 30/60/90 seconds may be selected, see the 3–12 minutes depending on the ambient
The following alternative can be selected for
section "Remote key functions" for more infor- temperature. Select On/Off depending on
opening the door windows at the same time by whether the recirculation timer is to be
mation.
pressing and holding the Unlock switch in active or not.
either of the front doors (see page 131 for Home safe lighting
additional information)1 This alternative determines the length of time Keyless locking and unlocking*
for which the car's lights will remain on when The following alternatives can be selected for
NOTE the high beam lever on the steering column is locking and unlocking the doors and liftgate:
pulled toward the wheel with the ignition • All doors – all doors are locked or unlocked
The ignition key must be in position I or
higher (see page 145) before the door win- switched off. Intervals of 30/60/90 seconds at the same time.
dows can be opened using the switches in may be selected, see page 65 for information
the doors. on using this function. • Doors on the same side – front and rear
doors on the same side are unlocked
together.
• Auto open all windows On/Off
1 This menu alternative also makes it possible to open both door windows by pressing and holding the Unlock button on the remote key for several seconds.
``
Personal settings
2 Factory default.
84
02 Instruments and controls
1 HomeLink and the HomeLink house are registered trademarks of Johnson Controls, Inc.
``
NOTE found where the hanging antenna wire is cedures, replace “Programming HomeLink”
attached to the motor-head unit. step 2 with the following:
02 Some devices may require you to replace
this Programming Step 2 with procedures 5. Firmly press and release the “learn” or • Continue to press and hold the HomeLink
noted in the “Gate Operator / Canadian Pro- “smart” button. (The name and color of the button while you press and release -
gramming” section. If the HomeLink indica- button may vary by manufacturer.) There every two seconds (“cycle”) your hand-
tor light does not change to a rapidly blink- are 30 seconds to initiate step 6. held transmitter until the HomeLink indica-
ing light after performing these steps, con- tor light changes from a slow to a rapidly
tact HomeLink at www.homelink.com. 6. Return to the vehicle and firmly press, hold blinking light. Now you may release both
for two seconds and release the pro- the HomeLink and hand-held transmitter
grammed HomeLink button. Repeat the buttons.
3. Firmly press, hold for five seconds and
“press/hold/release” sequence a second
release the programmed HomeLink but- Proceed with “Programming” step 3 to com-
time, and, depending on the brand of the
ton up to two separate times to activate the plete.
garage door opener (or other rolling code
door. If the door does not activate, press
equipped device), repeat this sequence a
and hold the just-trained HomeLink button
third time to complete the programming Using HomeLink
and observe the indicator light.
process. To operate, simply press and release the pro-
• If the indicator light stays on con- HomeLink should now activate your rolling grammed HomeLink button. Activation will
stantly, programming is complete now occur for the trained device (i.e., garage
and your device should activate when code equipped device.
door opener, gate operator, security system,
the HomeLink button is pressed and Gate Operator/Canadian Programming entry door lock, home/office lighting, etc.). For
released.
Canadian radio-frequency laws require trans- convenience, the hand-held transmitter of the
• If the indicator light blinks rapidly for mitter signals to “time-out” (or quit) after sev- device may also be used at any time. In the
two seconds and then turns to a con- eral seconds of transmission – which may not event that there are still programming difficul-
stant light continue with “Program- be long enough for HomeLink to pick up the ties or questions, contact HomeLink at:
ming” steps 4-6 to complete the pro- signal during programming. Similar to this www.homelink.com.
gramming of a rolling code equipped Canadian law, some U.S. gate operators are
device (most commonly a garage door designed to “time-out” in the same manner.
opener).
If you live in Canada or you are having difficul-
4. At the garage door opener receiver (motor-
ties programming a gate operator or garage
head unit) in the garage, locate the “learn”
door opener by using the “Programming” pro-
or “smart” button. This can usually be
2 The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met.
G020906
Air distribution......................................................................................... 99
03
03 Climate
General information
Air conditioning – A/C Fog on the inside of the windows Passenger compartment filter
Your car is equipped with a climate control The defroster function should be used to Replace the cabin air filter with a new one at
system that includes either manually adjusta- remove fog or mist from the inside of the win- the recommended intervals. Please refer to
ble air conditioning or optional Electronic Cli- dows. Keeping the windows clean with a com- your Warranty and Service Records Informa-
mate Control (ECC). mercially available window washing spray will tion booklet, or consult a trained and qualified
also help prevent fogging or misting Volvo service technician for these intervals.
The air conditioning system can be switched
03 The filter should be replaced more often when
off, but for optimal air quality in the passenger
driving under dirty and dusty conditions. The
compartment and to prevent the windows from Climate control maintenance
filter cannot be cleaned and therefore should
fogging, the air conditioning should be left on Special tools and equipment are required to always be replaced with a new one.
– even in cool weather. maintain and carry out repairs on the climate
system. Work of this type should only be done
NOTE by a trained and qualified Volvo service tech-
NOTE
nician. There are different types of cabin air filters.
In warm weather, a small amount of water
Ensure that the correct type is installed.
may accumulate under the car when it has
been parked. This water is condensation Refrigerant
from the A/C system and is normal.
Volvo cares about the environment. The air Display
conditioning system in your car contains a The display above the climate control panel
Ice and snow CFC-free refrigerant – R134a. This substance shows the climate settings that have been
will not deplete the ozone layer. The system made.
Always keep the air intake grille at the base of
contains 1.2 lbs (530 g) R134a (HFC 134a), and
the windshield free of snow.
uses PAG oil.
Personal settings
There are two functions in the climate system
that can be set to your preferences:
• Blower speed to Auto mode (models with
ECC only).
• Timer controlled recirculation of the air in
the passenger compartment.
90
03 Climate
General information
For information about how to make these set- closed. If you drive with the windows or moon-
tings, see the Personal settings section on roof open, it may be preferable to manually
page 82. adjust the temperature and blower control (the
LED in the AUTO switch should be off).
Models equipped with ECC* Acceleration
Sensors The air conditioning system is temporarily 03
switched off during full throttle acceleration.
• The sunlight sensor is on the upper side of
the dashboard
• The passenger compartment temperature
sensor is located behind the climate sys-
tem control panel.
• The ambient temperature sensor is in the
driver's side door mirror.
• The humidity sensor is in the rearview mir-
ror.
These sensors should never be obstructed.
NOTE
The sunlight sensor monitors the side of the
vehicle from which the sun shines into the
passenger compartment. This means that
the temperature may differ slightly between
the left and right air vents, even if the climate
system temperature is set to be the same
for both sides of the passenger compart-
ment.
Air vents
03
G019942
Open
Closed
Horizontal air flow
Vertical air flow
Direct the outer air vents toward the side win-
dows to defrost.
92
03 Climate
03
G019515
Climate system control panel
Blower speed Manual climate system functions 2. Recirculation
This function can be used to
Recirculation 1. Blower shut out exhaust fumes,
The blower speed can be smoke, etc from the passen-
Defroster
increased or decreased by ger compartment. The air in
Airflow controls turning the knob. If the knob is the passenger compartment
turned counterclockwise and is then recirculated, i.e. no air
A/C – ON/OFF the indicator light in the dis- from outside the car is taken
Heated driver's seat play goes out, the blower and into the car when this function is activated.
the air conditioning are Recirculation (together with the air condition-
Heated front passenger's seat switched off. The display shows the blower ing system) cools the passenger compartment
symbol and OFF. more quickly in very warm weather. If the air in
Rear window and door mirror defrosters
the car recirculates for too long, there is a risk
Temperature selector of condensation forming on the insides of the
windows, especially in winter.
``
93
03 Climate
Timer 4. Airflow controls Press the button once – both LEDs light up.
The timer function minimizes the risk of mist- Press one of the three buttons Reduced heating:
ing, or stale air when the recirculation function in the illustration to activate
is selected, see page 82 for information on set- the selected airflow. A symbol Press the button a second time – one LED
ting the recirculation timer. Recirculation is in the display above the cli- lights up.
always disengaged when you select mate control panel and a lit Seat heating off:
03 Defroster (3). LED in the selected button
indicate that the manual func- Press the button a third time – no LEDs are
3. Defroster tion has been selected. With manually selected lit.
Directs airflow to the wind- airflow both warm and cool air can be selected.
shield and side windows and 8. Heated rear window and door mirrors
The desired temperature is selected using con-
increases blower speed. Press to defrost the rear win-
trol 9.
dow and door mirrors.
5. A/C – On or Off The rear window and door
ON: The air conditioning sys- mirrors are defrosted simulta-
tem is engaged when the ON neously if the switch is
When the defroster is activated:
light is lit. pressed once. The defrost
• Air flows to the windows at high blower OFF: The system is disen- function is active if the LED in the switch is illu-
speed. minated.
gaged when the OFF lights
• The LED in the defroster button lights up up. • The function can be switched off manually
when this function is activated. The air con- by pressing the button,
ditioning system is controlled to provide If Defroster (3) is activated the air conditioning
maximum air dehumidification. is always engaged. • The defrost function switches off automat-
ically after 12–20 minutes, depending on
• The air conditioning is automatically 6/7. Heated front seats* the outside temperature.
switched on (can be switched off by press- Maximum heating:
ing button 5).
NOTE
On certain markets, the defrost function
may remain on longer than 20 minutes in
cold weather to help keep the rear window
free from ice or condensation.
9. Temperature selector
The knob with the thermome-
ter symbol is used to select
cooling or heating for both the
driver's and passenger's
sides of the car.
03
95
03 Climate
03
G019518
Auto – On/Off ECC functions 2. Blower speed
The blower speed can be
Blower speed 1. Auto – On/Off increased or decreased by
Recirculation The AUTO function automat- turning the knob. The blower
ically regulates climate con- speed is regulated automati-
Defroster trol to maintain the desired cally if AUTO is selected. The
temperature. The automatic previously set blower speed is
Airflow controls function controls heating, air disconnected.
A/C – ON/OFF conditioning, blower speed,
recirculation, and air distribu-
Heated driver's seat
NOTE
tion.
If the knob is turned counterclockwise and
Heated front passenger's seat If you select one or more manual functions, the the blower indication in the display goes
remaining functions continue to be controlled out, the blower and the air conditioning are
Rear window and door mirror defrosters automatically. All manual settings are switched switched off. The display shows the blower
Temperature selector off when AUTO is switched on. AUTO symbol and OFF.
CLIMATE is shown in the display.
``
Air distribution
Air to windshield and front Prevents fogging in cold Air to the floor and from For sunny weather with
side windows. or humid weather (blower the dashboard air vents. cool ambient tempera-
speed should be moder- tures.
There is also a certain
ate to high).
amount of airflow to the
dashboard air vents.
Air to the windows and For good comfort in Air to the floor. To warm the feet.
from the dashboard air warm, dry weather.
There is a certain amount
vents.
of airflow to the dash-
board and window air
vents.
Airflow directed to the To ensure efficient cooling Airflow to the windows, For cooler air toward the
head and chest from the in a warm weather. dashboard air vents, and feet, or for warmer air
dashboard air vents. floor. toward the head and
chest.
99
Front seats............................................................................................ 102
Interior lighting...................................................................................... 110
Storage compartments......................................................................... 111
Rear seat............................................................................................... 115
G020908
Cargo area............................................................................................ 117
100
INTERIOR
04
04 Interior
Front seats
Manual seat adjustment Turn this knob to adjust the backrest tilt. Accessing the rear seat
Control panel for the optional power seats.
NOTE
Both front seats are equipped with head
restraints that can be adjusted vertically to
suit the height of the passenger. The upper
edge of the head restraint should be at least
on a level with the upper-most point of the
seat occupant's ear (see the section
04 "Adjusting the front seat head restraints" on
page 108).
WARNING
The driver's and passenger's seats can be • Do not adjust the seat while driving. Seat access buttons (power seat shown)
adjusted in a number of ways to provide a • Adjust the driver’s seat and seat belt Seat adjustment handle
comfortable driving and sitting position. (see page 18) before driving. The seat
Seat adjustment button
should be adjusted so that the brake
Forward-rearward: Pull the lever up and pedal can be depressed fully.
slide the seat to the position of your choice.
• Position the seat as far rearward as
Use this control to raise or lower the front comfort and control allow.
edge of the seat cushion.
Use this control to raise or lower the rear
edge of the seat cushion.
Turn this knob (optional on some passeng-
er's seats) to adjust the firmness of the
lumbar support1.
102
04 Interior
Front seats
Manual seat
Moving the seat forward:
04
Hold the handle up and move it forward Fold the backrest forward until it locks in
Remove the seat belt from its guide (see slightly until the backrest begins to move. position.
page 19).
Move the seat forward.
``
103
04 Interior
Front seats
04
Hold the handle up and move it rearward 6. Return the seat belt to its guide.
slightly until the backrest begins to move. Seat position
If the seat does not return to its original posi-
tion, reset the seat memory function as follows:
1. Sit in the seat.
2. Lift the handle (1) (see page 102) and move
the seat as far rearward as possible.
3. While holding the handle up, move the seat
forward to the desired position.
104
04 Interior
Front seats
04
Hold the handle up and move it forward Fold the backrest forward until it locks in 1. With the backrest folded forward in the
slightly until the backrest begins to move. position. locked position, press and hold down the
button until the seat has returned to its
6. Hold down the button while the seat moves original position.
forward. If the seat is in a high position, it
will be lowered automatically so that the Pull up the handle.
head restraint does not come in contact
Hold the handle up and move it rearward
with the sun visor.
slightly until the backrest begins to move.
``
105
04 Interior
Front seats
G020199
that activates if a seat is blocked by any
After the seat has been returned to its orig- object. If this occurs, switch off the ignition
inal position, be sure that the backrest is (key in position 0) and wait for approxi-
securely locked in the upright position. Seat adjustment controls mately 20 seconds before operating the
seat again.
Front seats
Emergency stop 1. Adjust the seat to the desired position. the doors were most recently locked with
If the seat inadvertently begins to move, press 2. Press and hold down the "M" (Memory) the same remote key.
any of the buttons to stop the seat. button.
3. With the "M" button depressed, press
NOTE
Programming the seat memory, driver's
seat only* memory button 1 to store the seat's current The memory function in the remote key
position. operates independently the memory func-
tion in the seat.
To move the seat to the position that it was in
when memory button 1 was programmed,
press and hold down button 1 until the seat WARNING
stops moving.
• Because the driver's seat can be 04
As a safety precaution, the seat will stop auto- adjusted with the ignition off, children
matically if the button is released before the should never be left unattended in the
seat has reached the preset position. car.
``
Front seats
Adjusting the front seat head restraints The head restraints should be put in the upper WARNING
or lower position according to the height of the
occupant of the seat. After adjusting the head restraint, be sure
that it is securely locked in the new position
by pressing and/or pulling it.
108
04 Interior
Front seats
WARNING
• If a front seat head restraint has been
removed, it must be put properly back
in place and it must lock (click) into one
of the available adjustment positions
before the seat is occupied.
• The front seat head restraints must be
in position and properly adjusted to the
height of the person sitting in the seat
when the vehicle is driven and when the
front passenger's seat is occupied. 04
109
04 Interior
Interior lighting
Interior lighting Neutral position: the interior courtesy light- 5 minutes after the engine has been switched
ing comes on when a door is opened, and off.
is switched off 10 seconds after the door is
closed. Footwell lighting
The footwell (and courtesy lighting) comes on
Press the right side of the button: the inte- or goes off when one of the side doors is
rior courtesy lighting stays off. opened or closed.
G020210
The front seat reading lights can be switched switched off (the right side of button 2
on and off by pressing buttons (1) or (3) when depressed).
the ignition key is position I or II, or when the The automatic lighting goes out when:
engine is running. Raise the cover to switch on the light.
• the engine is started
The courtesy lighting (2) can be set to three
• the car is locked from the outside using the
positions: key blade or remote key.
Press the left side of the button: the interior If the courtesy lighting is not switched off man-
courtesy lighting turns on. ually, it will be turned off automatically
110
04 Interior
Storage compartments
04
``
111
04 Interior
Storage compartments
G024208
Compartment on rear side of front seat
backrests
WARNING The owners manual and maps can be stored The jacket hanger is located on the inboard
here. There are also holders for coins, pens and side of the front passenger's seat head
• Anchor any heavy objects to prevent fuel cards. The glove compartment can only be restraint. It is only intended for hanging light
them from moving during sudden stops. locked and unlocked using the detachable key garments.
• Packages on the rear parcel shelf can blade from the central locking system's remote
obscure vision and may become dan- key. See page 124 for information on removing
gerous projectiles in the event of a sud- the key blade from the remote key, and page
den stop or an accident. 131 for information about locking the glove
compartment.
112
04 Interior
Storage compartments
Storage under the front, center armrest CD storage Cup holders in the center console
04
G026704
G018371
G018372
There are two storage compartments under the The deep storage compartment has room for Two cup holders are located under the sliding
front, center armrest. 10 CD jewel cases. These cases must be cover in the center console.
inserted with their spines upward in order to
• Press the smaller button on the front edge allow space for 10 cases in the storage com- The cup holders can be lifted out if necessary.
of the armrest and lift the armrest cover to To do so, grasp the indentation on the rear
partment
access a shallow storage compartment. edge of the cup holder and lift.
• Press the larger button and lift the entire To put the cup holder back in place:
armrest to access a deeper compartment.
1. Slide the two locating tabs in the front side
of the cup holder into the two correspond-
ing recesses in the center console storage
space.
2. Press down the rear edge of the cup
holder.
To close the sliding cover, grasp the underside
of the front edge and pull.
``
113
04 Interior
Storage compartments
04
G019623
114
04 Interior
Rear seat
G007608
rest of the rear seat. Be sure to secure
cargo.
G009109
``
115
04 Interior
Rear seat
04
G009152
WARNING
Long loads should be securely anchored.
Cargo area
04
G007611
G007602
G009475
4. Place one of the rear locks at (B) and slide
The eyelets in the cargo area can be used to the lock pin into position by moving the
Installing the cargo area cover
fasten accessory load nets and lashing straps, lock button forward.
1. Before lifting cover into the vehicle, retract
load nets, and other load anchors. all four lock pins by pulling back the lock 5. Put the other rear lock into position in the
buttons as far as possible. The pins will same way and slide the lock pin into posi-
remain retracted. tion by moving the lock button forward.
2. Lift the cover into the vehicle at an angle, 6. Slide the front lock buttons forward, one at
turn it back and raise the front edge a time, so that the lock pins move into
slightly. position (A).
3. Place the front section of the cover on the
two support pins behind the locking points NOTE
(A) on both sides of the vehicle. The rear section of the cover can be folded
up when loading items into the cargo area.
``
Cargo area
WARNING Soft cargo area cover* 4. Attach the rear lower hooks on the cover to
the lower eyelets (D) on opposite sides of
The cargo area cover does not have a load the vehicle.
anchoring function. No item should be place
on top of the cargo area cover. These items Hanging the cover when it is not in use
could move forward and cause injury during
1. Remove the rear hooks (D) from the eye-
braking.
lets.
2. Press together the rear rails (C) and remove
Removing the cover
them from their attachments. Place them
1. Retract the front lock pins at (A) by pulling
at the front of the cargo area floor.
back the lock buttons on both sides as far
04 as possible. 3. Attach the hooks in the rail next to the
attachments (B).
2. Retract the rear lock pins at (B) by pulling
G007614
back the lock buttons on both sides as far The cargo area cover is now hanging near the
as possible. rear seat backrests until it is needed again.
3. Lift up and turn the cover before lifting it out Removing the cargo area cover
of the vehicle. The cargo area cover is pulled over the cargo
area and fastened to the eyelets with the hooks 1. Remove the hooks and remove the rails
on the corners of the cover. one at a time by pressing them together
and removing them from their attach-
Installing the cover ments.
1. Attach the front lower hooks on the cover 2. When all attachments have been removed,
to the lower eyelets (A) on opposite sides the cover can be rolled up and placed on
of the vehicle. the rear part of the cargo area floor to make
2. Insert the front upper attachments (B) by room for cargo.
pressing together the spring-loaded rails
and pressing them into place on opposite
sides of the vehicle.
3. Insert the upper rear rails (C) in the same
way.
Cargo area
WARNING Installing the net Folding up the cargo area floor hatch
1. Fold down the rear seat backrests (see
The cargo area cover does not have a load page 115).
anchoring function. No item should be place
on top of the cargo area cover. These items 2. Attach the cargo net to the upper mounting
could move forward and cause injury during brackets near the ceiling.
braking.
3. Attach the cargo net’s hooks in the eyelets
near the seat belts floor anchorages on
Cargo area net* opposite sides of the vehicle.
4. Pull the cargo net’s bands taut if neces-
sary. 04
WARNING
G014316
• Be sure that the net is securely attached
in the mounting brackets and eyelets.
• Cargo should be properly secured even Without the cargo area cover
when the net is in use. Fold up the hatch and attach it to the latches
on both sides of the cargo area.
Removing the cargo net
1. Release the pressure on the bands. With the hard cover in place
G007603
05
05 Locks and alarm
G019402
ence that may cause undesired operation.
remote key – this is where the transponder
Canada – IC: 3659AVO315TX is located. The car cannot be started if the
05
Operation is subject to the following condi- transponder is damaged.
Lock – Press the Lock button on the
tions: (1) this device may not cause interfer-
remote once to lock all doors and the lift-
ence, and (2) this device must accept any inter- USA – FCC ID: LTQWFS 125VO gate. The turn signals will flash once to
ference, including interference that may cause This device complies with part 15 of the FCC confirm locking.
undesired operation of the device. rules. Operation is subject to the following con-
dition: (1) This device may not cause harmful
NOTE
Loss of a remote key interference, and (2) this device must accept
any interference received, including interfer- The car can also be locked if a door is open
If either of the remote keys is lost, the other (does not apply to vehicles with the optional
ence that may cause undesired operation.
must be taken with the car to a Volvo retailer. keyless drive).
As an anti-theft measure, the code of the lost Canada – IC: 3659A-WFS125VO
remote key must be erased from the system. Operation is subject to the following condi-
Each key blade has a unique code, which is tions: (1) this device may not cause interfer-
used if new key blades are required. A maxi- ence, and (2) this device must accept any inter-
mum of six remote keys/key blades can be ference, including interference that may cause
programmed and used for one car. undesired operation of the device.
122
05 Locks and alarm
Unlock – Press the Unlock button on the 2 minutes unless a door or the liftgate has Panic alarm – This button can be used to
remote once to unlock the driver's door. been opened. attract attention during emergency situa-
After a short pause, press the Unlock but- • Automatic locking: When the car starts to tions. To activate the panic alarm, press
ton a second time within 10 seconds to move, the doors and liftgate can be locked and hold the red button for at least 3 sec-
unlock the other doors and the liftgate. A automatically. This feature can be turned onds or press it twice within 3 seconds.
long press (at least several seconds) opens on or off, see Personal settings on page The turn signals and horn will be activated.
all side windows. 82 for more information. The panic alarm will stop automatically
• Airbag deployment will automatically after 30 seconds. To deactivate, wait
NOTE attempt to unlock the doors. approximately 5 seconds and press the red
button again.
• The turn signals flash to confirm that the Approach lighting – As you approach the
vehicle has been correctly locked/ car: Press the button on the remote key to
unlocked with the remote key or the illuminate the area around the car in dark NOTE
optional keyless drive. When locking the conditions. Pressing the button once lights This button will NOT unlock the car.
vehicle, the turn signals will flash a con- up the interior lighting, parking lights, and
firmation only if all the doors are license plate lighting. These lights will
securely closed and locked. Flashing 05
switch off automatically after 30, 60 or Weak battery in the remote key
confirmation for locking and unlocking 90 seconds. See the Personal settings pa
may be customized in the vehicle's Per- ge 82 for information about adjusting the
sonal settings menu, see page 82 for time setting.
more information.
Unlock liftgate – Press the button once to
• The two-step unlocking function can be disarm the alarm system and unlock only
changed so that one press of the
the liftgate. After closing, the liftgate will
Unlock button unlocks all of the doors
not automatically relock. Press Lock to
and the liftgate. See Personal settings
relock it and rearm the alarm.
page 82 for more information.
NOTE
• Automatic relocking: If the doors are
unlocked, the locks will automatically reen- This function will not open the liftgate.
G019406
gage (re-lock) and the alarm will rearm after
``
123
05 Locks and alarm
When the battery begins to lose its charge, the The old battery should be disposed of properly While holding the catch, pull the key blade
Information symbol in the instrument panel at a recycling center or by a trained and quali- out of the remote key.
(see page 55) lights up and KEY BATTERY fied Volvo service technician.
LOW VOLTAGE is shown in the information Reinserting the key blade in the remote
display. key
Key blade 1. Hold the remote key with the pointed end
down.
Replacing the battery in the remote key
If the range of the transmitter is noticeably 2. Carefully slide the key blade into its groove.
reduced, this indicates that the battery (type 3. Gently press the key blade in the groove
CR 2450, 3V) is weak and should be replaced. until it clicks into place.
To replace the battery:
Unlocking the doors with the detached
1. Place the remote key with the keypad
key blade
downward. Pry open the cover with a small
1. Insert the key blade as far as possible in the
slotted screwdriver.
driver's door lock.
05
2. Remove the cover.
2. Turn the key blade clockwise approxi-
mately one-quarter turn to unlock the driv-
G019403
CAUTION er's door only.
When replacing the battery, avoid touching
the electrical circuitry in the other half of the Removing the key blade NOTE
remote key.
The key blade can be removed from the remote After unlocking the driver's door with the
key. When removed, it can be used as follows: key blade, opening the door will trigger the
3. Note how the + and – sides of the battery alarm.
are positioned on the inside of the cover • To lock/unlock the driver’s door
(see the underside of the cover). • To lock/unlock the glove compartment,
see page 131. To disable the alarm
4. Pry out and replace the battery. Avoid Press the Unlock button on the remote key, or
touching the battery and its contact surfa- Removing the key blade insert the key in the ignition switch.
ces with your fingers. Slide the spring loaded catch to the side.
5. Press the cover back into place.
124
05 Locks and alarm
Locking points
By utilizing the remote key with the key blade
removed, you can block access to the glove
compartment for e.g. valet parking or when the
car is brought to the retailer for service.
05
``
125
05 Locks and alarm
G019405
05 Locking/unlocking points for the remote
key with the key blade
Locking/unlocking points for the remote
key without the key blade
126
05 Locks and alarm
Keyless drive*
Keyless locking and unlocking Both of the remote keys provided with the vehi- Locking the vehicle
cle have the keyless function, and additional
remotes can be ordered. The system can
accommodate up to six keyless drive remote
keys.
NOTE
The number of doors that are unlocked at
the same time can be set in the Personal
settings menu, see page 82 for additional
information.
G020033
G007577
``
Keyless drive*
Locking or unlocking the vehicle with the to unlock the driver's door only. This will NOTE
key blade trigger the alarm.
If several people carrying keyless drive
• To disable the alarm: Press the Unlock remote keys approach the vehicle at the
button on the keyless drive remote key. If same time, the driver's seat will assume the
the batteries in the remote are weak, position it was in for the person who opens
remove the keyless drive start control from a door first.
the ignition switch by pressing the catch
(see the illustration on page 148) and pull-
ing the control out of the ignition switch. Keyless drive information messages
Insert the ignition key section of a keyless If anyone leaves the vehicle with the only key-
drive remote key in the ignition switch. less drive remote key in his or her possession
while the ignition is switched on, a message will
Keyless drive remote key and driver's be shown in the information display and an
seat memory audible signal will sound.
This function is only available on vehicles
G020225
Keyless drive*
CAUTION KR55WK48964
NOTE
• Keyless drive remote keys should never
be left in the vehicle. In the event of a This device complies with part 15 of the FCC
break-in, a remote found in the vehicle Rules. Operation is subject to the following two
could make it possible to start the conditions: (1) This device may not cause
engine. harmful interference, and (2) this device must
• Electromagnetic fields or metal accept interference received, including inter-
obstructions can interfere with the key- ference that may cause undesired operation.
less drive system. Avoid placing the CAUTION
remote key near cellular phones, metal-
lic objects or e.g., in a metal briefcase. Changes or modifications not expressly
approved by the manufacturer could void the
G020075
user's authority to operate the equipment.
Canada – IC:267T- 5WK48952,
Siemens VDO
267T- 5WK48964, 267T-5WK48891 5WK48891 On the inside center of the rear bumper 05
NOTE
Tested To Comply With FCC Standards Under the floor of the cargo area, near the
This device complies with RSS -210 of Industry rear seat
Canada. Operation is subject to the following For Automobile Use
Left door handle
two conditions: (1) This device may not cause
harmful interference, and (2) this device must Location of the keyless drive antennas Under the rear section of the center con-
accept interference received, including inter- sole
The keyless drive system has a number of
ference that may cause undesired operation.
antennas located at various points in the vehi- Right door handle
CAUTION cle.
Under the front section of the center con-
Changes or modifications not expressly sole
approved by the manufacturer could void the
user's authority to operate the equipment.
``
Keyless drive*
WARNING
People with implanted pacemakers should
not allow the pacemaker to come closer
than 9 inches (22 cm) to any of the keyless
drive system's antennas. This is to help pre-
vent interference between the pacemaker
and the keylesss drive system.
05
Locking/unlocking the vehicle from the NOTE Locking the glove compartment
inside
• The ignition key must be in position I or
higher (see page 145) before the win-
dows in the doors can be opened using
the switches in the front doors.
• The doors cannot be opened by pulling
up the lock buttons.
• If both doors are closed when a lock
button is pressed, the alarm will not be
armed.
• Each door can also be locked manually
using the lock button on that particular
G020034
door. This applies only if the car has not
G007451
1 This function must be set to On in the Personal settings menu (see page 83)
131
05 Locks and alarm
Alarm*
The alarm system The alarm indicator light • Fault in the alarm system: If a fault has
The alarm is automatically armed whenever the been detected in the alarm system, a mes-
car is locked with the remote key, or if a front sage will be shown in the information dis-
lock button is depressed. play. Contact your Volvo retailer to have
the alarm system inspected and repaired if
When armed, the alarm continuously monitors necessary.
a number of points on the car. The following
conditions will trigger the alarm:
Arming the alarm
• The hood is forced open. Press the LOCK button on the remote key,
• The liftgate is forced open. or press the central lock button on one of
• A door is forced open. the front doors with the door open. One
long flash of the turn signals will confirm
• The ignition switch is tampered with
that the alarm is armed.
G020227
• An attempt is made to start the car with a
non-approved key (a key not coded to the
05 car's ignition). Disarming the alarm
Alarm indicator light Press the UNLOCK button on the remote
• If there is movement in the passenger com-
partment (if the car is equipped with the The status of the alarm system is indicated by key or insert the key in the ignition1 to dis-
optional movement sensor). the indicator light on at the top of the dash- arm the alarm. Two short flashes from the
board (see the illustration): car's direction indicators confirm that the
• The car is lifted or towed (if the car is equip- alarm has been deactivated and that all
ped with the optional inclination sensor) • Indicator light off – the alarm is not armed doors are unlocked.
• The battery is disconnected (while the • The indicator light flashes every two sec-
alarm is armed). onds – the alarm is armed
• The siren is disconnected when the alarm • The indicator light flashes rapidly before
is disarmed. the ignition is switched on – the alarm has
• The liftgate window is broken. been triggered. The message ALARM
TRIGGERED, CHECK CAR will also be
displayed.
1 On vehicles with the optional keyless drive, press in the start control in the ignition switch.
Alarm*
Turning off (stopping) the alarm Temporarily turning off the accessory In certain situations it may be desirable to turn
If the alarm is sounding, it can be stopped by alarm sensor(s) off the accessory inclination and movement
pressing the UNLOCK button on the remote alarm sensors if, for example, you drive your
key or by inserting the key in the ignition switch. vehicle onto a ferry where the rocking of the
The driver's door must first be unlocked with boat could trigger the alarm or if a pet is left in
the key blade. the vehicle with the doors locked.
To do so:
NOTE 1. Press MENU to enter the menu system and
On vehicles equipped with the optional key- scroll to Car settings (for a more detailed
less drive, the start control must be description of the menus, see page 82.
removed from the ignition switch before the
key can be inserted, see page 148 for 2. Select Reduced guard.
instructions.
3. Select Activate once and the message
Reduced guard – See manual will
Audible/visual alarm signal appear in the information display. The 05
alarm sensors will be turned off when the
An audible alarm signal is given by a battery
vehicle is locked.
powered siren. The alarm cycle lasts for
30 seconds. or
Select Ask on exit. Each time the ignition
NOTE key is turned to position 0, the message
G026313
The visual alarm signal is given by flashing Press ENTER to reduce guard until
all turn signals and turning on the interior engine is started. Press EXIT to
lighting for approximately 5 minutes. Display cancel will be displayed. Select one of the
MENU alternatives:
``
Alarm*
or
• If you do not wish to deactivate the sen-
sors, do not choose an alternative and lock
the vehicle or press EXIT and lock the vehi-
cle.
CAUTION
• The accessory sensors are automati-
cally reconnected to the alarm system
the next time the vehicle is unlocked
and then locked again.
• This function will not turn off the vehi-
cle's standard alarm.
05
U.S.A. FCC ID: MAYDA 5823(3)
This device complies with part 15 of the FCC
rules. Operation is subject to the following con-
ditions: (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interfer-
ence that may cause undesired operation.
05
135
General information............................................................................... 138
Fuel requirements................................................................................. 142
Ignition switch....................................................................................... 145
Starting the vehicle............................................................................... 146
Starting the vehicle with keyless drive*................................................. 148
Manual transmission, 6-speed*............................................................ 149
Automatic transmission*....................................................................... 150
Shiftlock override.................................................................................. 152
Brake system........................................................................................ 153
Stability system..................................................................................... 155
Towing.................................................................................................. 157
Jump starting........................................................................................ 159
Transporting loads................................................................................ 160
Blind Spot Information System (BLIS)*................................................. 161
G020912
Park assist*........................................................................................... 165
06
06 Starting and driving
General information
Economical driving conserves natural • Note that roof racks, ski racks, etc, WARNING
resources increase air resistance and also fuel con-
sumption. Driving with the liftgate open: Driving with
Better driving economy may be obtained by the liftgate open could lead to poisonous
thinking ahead, avoiding rapid starts and stops • At highway driving speeds, fuel consump- exhaust gases entering the passenger com-
and adjusting the speed of your vehicle to tion will be lower with the air conditioning partment. If the liftgate must be kept open
immediate traffic conditions. on and the windows closed than with the for any reason, proceed as follows:
air conditioning off and the windows open.
Observe the following rules: 1. Close the windows.
• Using the onboard trip computer's fuel 2. Set the ventilation system control to air
• Bring the engine to normal operating tem- consumption modes can help you learn
perature as soon as possible by driving how to drive more economically. flow to floor, windshield and side win-
with a light foot on the accelerator pedal for dows and the blower control to its high-
the first few minutes of operation. A cold Other factors that decrease gas mileage est setting.
engine uses more fuel and is subject to are:
increased wear. • Dirty air cleaner
Weight distribution affects handling
• Whenever possible, avoid using the vehicle • Dirty engine oil and clogged oil filter
for driving short distances. This does not At the specified curb weight your vehicle has a
allow the engine to reach normal operating
• Dragging brakes tendency to understeer, which means that the
temperature. • Incorrect front end alignment steering wheel has to be turned more than
Some of the above mentioned items and others might seem appropriate for the curvature of a
• Drive carefully and avoid rapid acceleration
bend. This ensures good stability and reduces
06 and hard braking. are checked at the standard maintenance
intervals. the risk of rear wheel skid. Remember that
• Use the transmission's Drive (D) position these properties can alter with the vehicle load.
as often as possible and avoid using kick- The heavier the load in the cargo area, the less
down. the tendency to understeer.
• Do not exceed posted speed limits.
• Avoid carrying unnecessary items (extra
load) in the vehicle.
• Maintain correct tire pressure. Check tire
pressure regularly (when tires are cold).
• Remove snow tires when threat of snow or
ice has ended.
138
06 Starting and driving
General information
1 Synthetic oil is not used when the oil is changed at the normal maintenance intervals except at owner request and at additional charge. Please consult your Volvo retailer.
``
139
06 Starting and driving
General information
more frequently and spray an anti-rust oil Conserving electrical current NOTE
on the battery posts. Keep the following in mind to help minimize
• Volvo recommends the use of snow tires battery drain:
• If the ignition is switched on, a warning
message will be displayed in the text
on all four wheels for winter driving – see
the chapter "Wheels and tires." • When the engine is not running, avoid turn- window in the instrument panel when
ing the ignition key to position II. Many the battery charge is low.
• To prevent the washer fluid reservoir from electrical systems (the audio system, the • An energy conserving function
freezing, add washer solvents containing optional navigation system, power win- designed into the vehicle's electrical
antifreeze (see page 211 for the location of dows, etc) will function with the ignition key system will switch off certain functions
the washer fluid reservoir). This is impor- in position I. This position reduces drain on or reduce the load on the battery by,
tant since dirt is often splashed on the the battery. e.g., reducing the audio system's vol-
windshield during winter driving, requiring
the frequent use of the washers and wip- • Please keep in mind that using systems, ume.
accessories, etc that consume a great deal
ers. Volvo Washer Solvent should be dilu-
of current when the engine is not running
ted as follows: Down to 14 °F (–10 °C):
1 part washer solvent and 4 parts water
could result in the battery being completely Before a long distance trip
drained. It is always worthwhile to have your vehicle
Down to 5 °F (–15 °C): 1 part washer sol-
vent and 3 parts water Down to 0 °F • The optional 12 volt socket in the cargo checked at a trained and qualified Volvo serv-
(–18 °C): 1 part washer solvent and 2 parts area (certain models only) provides electri- ice technician before driving long distances.
water Down to –18 °F (–28 °C): 1 part cal current even with the ignition switched Your trained and qualified Volvo service tech-
washer solvent and 1 part water. off, which drains the battery. nician will also be able to supply you with
06 bulbs, fuses, spark plugs and wiper blades for
• Use Volvo Teflon Lock Spray in the locks.
your use in the event that problems occur.
NOTE As a minimum, the following items should be
checked before any long trip:
Avoid using de-icing sprays as they can
cause damage to the locks. • Check that engine runs smoothly and that
fuel consumption is normal.
• Check for fuel, oil, and fluid leakage
• Have the transmission oil level checked2.
• Check condition of drive belts.
2 To prevent injury from contact with hot surfaces, do not inspect your vehicle's transmission fluid yourself. Have your vehicle's transmission fluid level inspected by a qualified Volvo service technician.
140
06 Starting and driving
General information
06
141
06 Starting and driving
Fuel requirements
Octane rating engine's capacity, and for the smoothest pos- Use of Additives
sible operation. With the exception of gas line antifreeze during
Minimum octane winter months, do not add solvents, thicken-
NOTE ers, or other store-bought additives to your
vehicle's fuel, cooling, or lubricating systems.
When switching to higher octane fuel or
changing gasoline brands, it may be neces- Overuse may damage your engine, and some
sary to fill the tank more than once before a of these additives contain organically volatile
difference in engine operation is noticeable. chemicals. Do not needlessly expose yourself
to these chemicals.
Fuel Formulations
Do not use gasoline that contains lead as a WARNING
G028920 knock inhibitor, and do not use lead additives. Never carry a cell phone that is switched
Besides damaging the exhaust emission con- on while refueling your vehicle. If the phone
trol systems on your vehicle, lead has been rings, this may cause a spark that could
strongly linked to certain forms of cancer. ignite gasoline fumes, resulting in fire and
Typical pump octane label injury.
Volvo recommends premium fuel for best per- Many fuels contain benzene as a solvent.
formance, but using 87 octane or above will not Unburned benzene has been strongly linked to
affect engine reliability. certain forms of cancer. If you live in an area WARNING
06 where you must fill your own gas tank, take Carbon monoxide is a poisonous, colorless,
Volvo engines are designed to achieve rated precautions. These may include: and odorless gas. It is present in all exhaust
horsepower, torque, and fuel economy per- gases. If you ever smell exhaust fumes
formance using premium 91 octane fuel. • standing upwind away from the filler nozzle inside the vehicle, make sure the passenger
while refueling compartment is ventilated, and immediately
Demanding driving • refueling only at gas stations with vapor return the vehicle to a trained and qualified
In demanding driving conditions, such as oper- recovery systems that fully seal the mouth Volvo service technician for correction.
ating the vehicle in hot weather, towing a trailer, of the filler neck during refueling
or driving for extended periods at higher alti-
tudes than normal, it may be advisable to
• wearing neoprene gloves while handling a
fuel filler nozzle.
switch to higher octane fuel (91 or higher) or to
change gasoline brands to fully utilize your
142
06 Starting and driving
Fuel requirements
Deposit control gasoline (detergent ness of the emission control system and could use of the following "oxygenated" fuels; how-
additives) result in loss of emission warranty coverage. ever, the octane ratings listed on this page
Volvo recommends the use of detergent gas- State and local vehicle inspection programs must still be met.
oline to control engine deposits. Detergent will make detection of misfueling easier, pos-
Alcohol – Ethanol: Fuels containing up to 10%
gasoline is effective in keeping injectors and sibly resulting in emission test failure for mis-
ethanol by volume may be used. Ethanol may
intake valves clean. Consistent use of deposit fueled vehicles.
also be referred to as Ethyl alcohol, or "Gaso-
control gasolines will help ensure good driva- hol".
bility and fuel economy. If you are not sure NOTE
whether the gasoline contains deposit control Ethers – MTBE: Fuels containing up to 15%
Some U.S. and Canadian gasolines contain MTBE may be used.
additives, check with the service station oper- an octane enhancing additive called methyl-
ator. cyclopentadienyl manganese tricarbonyl Methanol
(MMT). If such fuels are used, your Emission
Do not use gasolines containing methanol
NOTE Control System performance may be affec-
ted, and the Check Engine Light (malfunc- (methyl alcohol, wood alcohol). This practice
Volvo does not recommend the use of tion indicator lamp) located on your instru- can result in vehicle performance deterioration
store-bought fuel injector cleaning addi- ment panel may light. If this occurs, please and can damage critical parts in the fuel sys-
tives. return your vehicle to a trained and qualified tem. Such damage may not be covered under
Volvo service technician for maintenance. the New Vehicle Limited Warranty.
Unleaded fuel
Gasoline containing alcohol and ethers Fuel filler door 06
Each Volvo has a three-way catalytic converter
Some fuel suppliers sell gasoline containing Press the button on the light switch panel (see
and must use only unleaded gasoline. U.S. and
Canadian regulations require that pumps deliv- "oxygenates" which are usually alcohols or the illustration on page 63) with the ignition
ering unleaded gasoline be labelled "UNLEA- ethers. In some areas, state or local laws switched off to unlock the fuel filler door.
DED". Only these pumps have nozzles which require that the service pump be marked indi- Please note that the fuel filler door will remain
fit your vehicle's filler inlet. It is unlawful to dis- cating use of alcohols or ethers. However, unlocked until the vehicle begins to move for-
pense leaded fuel into a vehicle labelled there are areas in which the pumps are ward. An audible click will be heard when the
"unleaded gasoline only". Leaded gasoline unmarked. If you are not sure whether there is fuel filler door relocks.
damages the three-way catalytic converter and alcohol or ethers in the gasoline you buy, check If you intend to leave your vehicle while it is
the heated oxygen sensor system. Repeated with the service station operator. To meet sea- being refueled, this feature enables you to lock
use of leaded gasoline will lessen the effective- sonal air quality standards, some areas require the doors/liftgate while leaving the fuel filler
the use of "oxygenated" fuel. Volvo allows the door unlocked.
``
143
06 Starting and driving
Fuel requirements
You can also keep the vehicle locked if you CAUTION under the New Vehicle Limited War-
remain inside it during refueling. The central ranty.
locking button does not lock the fuel filler door. • Do not refuel with the engine running1.
Turn the ignition off or to position I. If the
Be sure the fuel filler door is not obstructed and ignition is on, an incorrect reading could
is completely closed after refueling. Open the occur in the fuel gauge
fuel filler cap slowly during hot weather.
• After refueling, close the fuel filler cap
by turning it clockwise until it clicks into
Refueling place.
The fuel tank is designed to accommodate • Avoid overfilling the fuel tank. Do not
possible expansion of the fuel in hot weather, press the handle on the filler nozzle
see page 267 for fuel tank volume. Be aware more than one extra time. Too much fuel
that the "usable" tank capacity will be some- in the tank in hot weather conditions can
what less than the specified maximum. When cause the fuel to overflow. Overfilling
the fuel level is low, such factors as ambient could also cause damage to the emis-
temperature, the fuel's "Reid vapor pressure" sion control systems.
characteristics, and terrain can affect the fuel • Avoid spilling gasoline during refueling.
pump's ability to supply the engine with an In addition to causing damage to the
adequate supply of fuel. Therefore, it is advis- environment, gasolines containing
able to refuel as soon as possible when the alcohol can cause damage to painted
06
needle nears the red zone, or when the fuel surfaces, which may not be covered
warning light comes on. under the New Vehicle Limited War-
ranty.
• Do not use gasolines containing meth-
anol (methyl alcohol, wood alcohol).
This practice can result in vehicle per-
formance deterioration and can dam-
age critical parts in the fuel system.
Such damage may not be covered
1 If the fuel filler cap is not closed tightly or if the engine is running when the vehicle is refueled, the Check Engine Light (malfunction indicator lamp) may indicate a fault. However, your vehicle’s
performance will not be affected. Use only Volvo original or approved fuel filler caps.
144
06 Starting and driving
Ignition switch
1 Automatic transmission: the gear selector must be in the Park position. The optional keyless drive start control does not need to be removed.
2 Please be aware that leaving the key in this positions I or II will increase battery drain.
145
06 Starting and driving
1 The optional keyless drive start control does not need to be removed from the ignition switch.
146
06 Starting and driving
WARNING
Volvo's floor mats are specially manufac-
tured for your car. They must be firmly
secured in the clips on the floor so that they
cannot slide and become trapped under the
pedals on the driver's side.
• Always place the gear selector in Park
(P) (manual transmission: first or reverse
gear) and apply the parking brake
before leaving the vehicle.and apply the
parking brake before leaving the vehi-
cle. Never leave the vehicle unattended
with the engine running.
• Always open garage doors fully before
starting the engine inside a garage to
ensure adequate ventilation. The
exhaust gases contain carbon monox-
ide, which is invisible and odorless but
very poisonous.
06
CAUTION
Automatic transmission: The engine
should be idling when you move the gear
selector. Never accelerate until after you
feel the transmission engage! Accelerating
immediately after selecting a gear will cause
harsh engagement and premature trans-
mission wear. Selecting P or N when idling
at a standstill for prolonged periods of time
will help prevent overheating of the auto-
matic transmission fluid.
147
06 Starting and driving
Starting a vehicle with keyless drive 1. Press the brake pedal (the clutch pedal
must also be fully depressed on models
with a manual transmission).
2. Press in the keyless drive start control and
turn it to position III.
NOTE
The vehicle is equipped with an autostart
function that makes it possible to start the
engine without holding the start control in
position III. Turn the start control to posi-
tion III and release it. The starter motor will
G019420
then operate automatically (for up to ten
G019410
NOTE
A keyless drive remote key must be inside
the vehicle in order to start the engine.
WARNING
An extra mat on the driver's floor can cause
the accelerator, brake, and/or clutch pedal
to catch. Check that the movement of these
pedals is not impeded. Not more than one
protective floor covering may be used at
one time.
G018258
G018259
• Depress the clutch pedal completely when
changing gears1 Reverse gear should only be engaged from a
• Remove your foot from the clutch pedal complete stop.
while driving. The shift pattern should be 06
followed. NOTE
• Overdrive (5th and 6th gears) should be Reverse gear is electronically blocked to
used as often as possible to help improve help prevent it from being selected while the
fuel economy. vehicle is moving foward.
1 Clutch interlock: The clutch must be fully depressed before you can start your car. If the clutch is notdepressed, it will not be possible to start the engine.
Automatic transmission*
NOTE
If the gear selector is in the Neutral position
and the vehicle has been at a standstill for
G020237
G018264
06 The gear selector can be moved freely between 1. Turn the ignition key to position II (if the
the Geartronic (manual shifting) and Drive (D) engine is not already running).
positions while driving.
D - left position: automatic shifting, M - right posi- 2. Depress the brake pedal.
tion: manual shifting
3. Move the gear selector to the desired posi-
CAUTION tion.
Automatic transmission*
based on the level of acceleration and speed. time and will utilize the braking power of Kickdown will not occur if the driver attempts
The car must be at a standstill when shifting to the engine. If the current speed is too high to use this function when engine speeds are
position D from position R. for using a lower gear, the downshift will too high. The transmission will remain in the
not occur until the speed has decreased currently selected gear.
enough to allow the lower gear to be used.
Manual shifting – Geartronic
The manual shifting mode (Geartronic) can be
• If you slow to a very low speed, the trans-
mission will automatically shift down.
selected at any time to manually select forward
gears, including while the car is moving.
Cold starts (turbo engines)
NOTE When driving before the engine has reached its
normal operating temperature, the transmis-
Reverse, Neutral, and Park cannot be
sion will shift up at slightly higher engine
selected in Geartronic mode.
speeds to heat the three-way catalytic con-
verter as quickly as possible.
• To access the Manual (M) shifting position
from Drive (D), move the gear selector to
the right to M. Kickdown
Automatic shift to a lower gear (kickdown) is
• To return to the Drive (D) position from M,
move the gear selector to the left. achieved by depressing the accelerator pedal
fully and briskly. An upshift will occur when 06
While driving approaching the top speed for a particular gear
• If you select the M position while driving, or by releasing the accelerator pedal slightly.
the gear that was being used in the Drive Kickdown can be used for maximum acceler-
position will also initially be selected in the ation or when passing at highway speeds.
M position.
Safety function
• Move the gear selector forward To help prevent excessive engine speeds (rpm)
(toward "+") to shift to a higher gear or
rearward (toward "–") to shift to a lower that could lead to engine damage, the engine
gear. management system includes a function that
prevents kickdown from taking place if the
• If you hold the gear selector toward "–", the engine speed is too high.
transmission will downshift one gear at a
Shiftlock override
Overriding the shiftlock system 4. Insert the key blade, see page 124, into the
opening and press it down until it bottoms.
5. With the key blade pressed down, move
the gear selector out of the P position.
G018263
152
06 Starting and driving
Brake system
Brake circuit malfunction Power brakes function only when the Severe strain on the brake system
The brake system is a hydraulic system con- engine is running The brakes will be subject to severe strain
sisting of two separate brake circuits. If a prob- The power brakes utilize vacuum pressure when driving in mountains or hilly areas, or
lem should occur in one of these circuits, it is which is only created when the engine is run- when towing a trailer. Vehicle speed is usually
still possible to stop the vehicle with the other ning. Never let the vehicle roll to a stop with the slower, which means that the cooling of the
brake circuit. engine switched off. brakes is less efficient than when driving on
level roads. To reduce the strain on the brakes,
If the brake pedal must be depressed farther If the power brakes are not working, consider-
shift into a lower gear and let the engine help
than normal and requires greater foot pressure, ably higher pressure will be required on the
with the braking. Do not forget that if you are
the stopping distance will be longer. brake pedal to compensate for the lack of
towing a trailer, the brakes will be subjected to
A warning light in the instrument panel will light power assistance. This can happen for exam-
a greater than normal load.
up to warn the driver that a fault has occurred. ple when towing your vehicle or if the engine is
switched off when the vehicle is rolling. The
If this light comes on while driving or braking, brake pedal feels harder than usual. Anti-lock brakes (ABS)
stop immediately and check the brake fluid The Anti-lock Braking System (ABS) helps to
level in the reservoir. improve vehicle control (stopping and steering)
Water on brake discs and brake pads
affects braking during severe braking conditions by limiting
NOTE brake lockup. When the system "senses"
Driving in rain and slush or passing through an
Press the brake pedal hard and maintain impending lockup, braking pressure is auto-
automatic car wash can cause water to collect
pressure on the pedal – do not pump the matically modulated in order to help prevent
on the brake discs and pads. This will cause a 06
brakes. lockup that could lead to a skid.
delay in braking effect when the pedal is
depressed. To avoid such a delay when the The system performs a self-diagnostic test
WARNING brakes are needed, depress the pedal occa- when the engine is started and when the
sionally when driving through rain, slush, etc. vehicle first reaches a speed of approxi-
If the fluid level is below the MIN mark in the This will remove the water from the brakes. mately 12 mph (20 km/h). The brake pedal will
reservoir or if a brake system message is
Check that brake application feels normal. This pulsate several times and a sound may be
shown in the information display, DO NOT
DRIVE. Have the vehicle towed to a Volvo should also be done after washing or starting audible from the ABS control module. This is
retailer and have the brake system inspec- in very damp or cold weather. normal.
ted.
``
153
06 Starting and driving
Brake system
154
06 Starting and driving
Stability system
G020349
that begins to lose traction to the wheel on the tem's spin control function has tempo-
opposite side of the vehicle (on the same axle). rarily been switched off.
TC is most active at low speeds. Thumb wheel • The stability control indicator light
will illuminate and remain on until spin
This is one of the stability system's permanent RESET button control has been reactivated.
functions and cannot be switched off.
Spin control (SC)
• The spin control function is automati-
cally enabled each time the engine is
The spin control function is designed to help started. 06
prevent the drive wheels from spinning while
the vehicle is accelerating. • DSTC ON indicates that all system
functions are active.
Under certain circumstances, such as when
driving with snow chains, or driving in deep
snow or loose sand, it may be advisable to
Active yaw control – AYC (DSTC only)
temporarily switch off this function for maxi- This function helps maintain directional stabil-
mum tractive force. ity, for example when cornering, by braking
one or more of the wheels if the vehicle shows
a tendency to skid or slide laterally.
``
155
06 Starting and driving
Stability system
156
06 Starting and driving
Towing
Emergency towing After the vehicle has been towed, the eye- unlocked. With the engine off and the vehi-
let should be removed and returned to its cle at a standstill, great effort will be
storage space. required to turn the steering wheel.
Press the cover back into position. 3. Turn the ignition key to position II.
4. Place the gear selector in neutral. For vehi-
WARNING cles with automatic transmissions, follow
Do not use the towing eyelets to pull the instruction on page 152, "Shiftlock over-
vehicle up onto a flat bed tow truck. ride" to allow the gear selector to be moved
from the Park position.
5. Keep firm pressure on the brake pedal
Towing a vehicle with all four wheels on
while releasing the parking brake.
the ground
6. When towing has been completed, return
G007607
``
157
06 Starting and driving
Towing
• When the engine is not running, steering If it is absolutely necessary to tow the vehicle • The towing eyelets must not be used for
resistance and the effort needed to with the front wheels on the ground, please pulling the vehicle out of a ditch or for
apply the brakes will be great. any similar purpose involving severe
refer to the towing information on the previous
strain. Do not use the towing eyelets to
• Never attempt to tow a vehicle with a page.
pull the vehicle up onto a flat bed tow
dead battery at night.
• Sling-type equipment applied at the front truck.
will damage radiator and air conditioning
CAUTION lines.
• It is equally important not to use sling-type
• Check with state and local authorities equipment at the rear or apply lifting equip-
before attempting this type of towing, ment inside the rear wheels; serious dam-
06 as vehicles being towed are subject to age to the rear axle may result.
regulations regarding maximum towing
speed, length and type of towing • If the vehicle is being towed on a flat bed
device, lighting, marker flags, etc. truck, the towing eyelets must not be used
to secure the vehicle on the flat bed. Con-
• Never attempt to push- or tow-start a sult the tow truck operator.
vehicle with a dead battery. This would
inject unburned fuel into the three-way
catalytic converter(s), causing over-
heating, backfiring, and damage, see
page 159 for instructions on jump star-
ting the vehicle.
158
06 Starting and driving
Jump starting
Jump starting the vehicle your vehicle's battery (2), marked with a WARNING
"+" sign.
• Do not connect the jumper cable to any
3. Connect the auxiliary battery's negative (–) part of the fuel system or to any moving
terminal (3) to the ground point in your parts. Avoid touching hot manifolds.
vehicle's engine compartment near the
driver's side spring strut (4).
• Batteries generate hydrogen gas, which
is flammable and explosive.
4. Start the engine in the assisting vehicle, • Battery fluid contains sulfuric acid. Do
then start the engine in the vehicle with not allow battery fluid to contact eyes,
dead battery. skin, fabrics or painted surfaces. If con-
5. After the engine has started, first remove tact occurs, flush the affected area
the negative (–) terminal jumper cable. immediately with water. Obtain medical
G020298
Then remove the positive (+) terminal help immediately if eyes are affected.
jumper cable. • Never expose the battery to open flame
or electric spark.
WARNING • Do not smoke near the battery.
Follow these instructions to jump start your
vehicle's dead battery or to jump start another PROPOSITION 65 WARNING! • Failure to follow the instructions for
jump starting can lead to personal
vehicle's dead battery using your vehicle. If the Battery posts, terminals, and related acces- injury.
12-volt auxiliary battery to be used is in another sories contain lead and lead compounds, 06
vehicle, check that the vehicles are not touch- chemicals known to the state of California • Do not touch the jumper cables during
ing to prevent premature completion of a cir- to cause cancer and reproductive harm. the attempt to start the vehicle. This
Wash hands after handling. could cause sparks.
cuit. Be sure to follow jump starting instruc-
tions provided for the other vehicle.
To jump start your vehicle:
1. Switch off the ignition.
2. First connect the auxiliary battery positive
(+) terminal (1) to the positive (+) terminal in
159
06 Starting and driving
Transporting loads
160
06 Starting and driving
Introduction WARNING B
• BLIS is an information system, NOT a
warning or safety system.
• BLIS does not eliminate the need for A
you to visually confirm the conditions
around you, and the need for you to turn
your head and shoulders to make sure
that you can safely change lanes.
• As the driver, you have full responsibility
for changing lanes in a safe manner.
G020296
The system is based on digital camera tech-
G020295
``
Limitations CAUTION
In certain situations, the BLIS indicator light(s)
may illuminate even when there are no other • Clean the lenses carefully to avoid
vehicles in the area monitored by the system. scratching.
• The lenses are electrically heated to
G018177
NOTE help melt ice or snow. If necessary, gen-
tly brush away snow from the lenses.
If the BLIS indicator lights illuminate occa-
sionally even when there are no other vehi- The vehicle's own shadow against a large, light,
cles in the blind area, this does not indicate smooth surface such as barriers between lanes on Switching BLIS on and off
a fault in the system. a highway
In the event of a fault, Blind spot syst.
service required will be displayed.
G018270
In order to function optimally, the BLIS camera
lenses must be kept clean. They can be wiped
clean with a soft cloth or wet sponge.
BLIS button (left button in the illustration)
Light reflected from a wet road surface BLIS is automatically activated when the igni-
tion is switched on. The indicator lights will
provide confirmation by flashing 3 times.
• The system can be switched off by press-
ing the BLIS button in the center console.
The indicator light in the button goes out
``
Park assist*
``
Park assist*
Park assist*
G007601
NOTE
If the sensors are obstructed by e.g., dirt,
snow, or ice, this could result in false warn-
ing signals from the park assist system.
G020918
Tire Pressure Monitoring System (TPMS)............................................. 193
168
WHEELS AND TIRES
07
07 Wheels and tires
General information
Introduction of road holding on slippery surfaces than tires You should replace the spare tire when you
Your vehicle is equipped with tires according without the "all-season" rating. However, for replace the other road tires due to the aging of
to the vehicle's tire information placard on the optimum road holding on icy or snow-covered the spare.
B-pillar (the structural member at the side of roads, we recommend suitable winter tires on
A tire's age can be determined by the DOT
the vehicle, at the rear of the driver's door all four wheels.
stamp on the sidewall (see the illustration).
opening), or on the inside of the fuel filler door When replacing tires, be sure that the new tires
on Canadian models. A tire with e.g., visible cracks or discoloration
are the same size designation, type (radial) and
should be replaced immediately.
preferably from the same manufacturer, on all
CAUTION four wheels. Otherwise there is a risk of altering Improving tire economy
Some Volvo models are equipped with an the car's roadholding and handling characte- • Maintain correct tire pressure. For the tire
Ultra High Performance tire and wheel com- ristics. pressure tables, see page 175.
bination designed to provide maximum dry • Drive smoothly: avoid fast starts, hard
pavement performance with consideration New Tires
Remember that tires are per- braking and tire screeching.
for hydroplaning resistance. As such, they
may be more susceptible to road hazard ishable goods. As of 2000, the • Tire wear increases with speed.
damage and, depending on driving condi- manufacturing week and year • Correct front wheel alignment is very
tions, may achieve a tread life of less than (Department of Transporta- important.
20,000 miles (30,000 km). Even if this vehi- tion (DOT) stamp) will be indi-
cle is equipped with Volvo’s advanced • Unbalanced wheels impair tire economy
cated with 4 digits (e.g. 1502 and driving comfort.
DSTC system, these tires are not designed
for winter driving, and should be replaced means that the tire illustrated
was manufactured during week 15 of 2002). • Tires must maintain the same direction of
with winter tires when weather conditions rotation throughout their lifetime.
dictate.
Tire age • When replacing tires, the tires with the
Tires degrade over time, even when they are most tread should be mounted on the rear
07 The tires have good road holding characteris- not being used. It is recommended that tires wheels to reduce the chance of oversteer
tics and offer good handling on dry and wet generally be replaced after 6 years of normal during hard braking.
surfaces. It should be noted however that the service. Heat caused by hot climates, frequent
tires have been developed to give these fea-
• Hitting curbs or potholes can damage the
high loading conditions or Ultra Violet (U.V) tires and/or wheels permanently.
tures on snow/ice-free surfaces. exposure can accelerate the aging process.
Certain models are equipped with "all-season"
tires, which provide a somewhat higher degree
170
07 Wheels and tires
General information
Summer and winter tires • Contact a Volvo workshop if you are WARNING
unsure about the tread depth.
• The wheel and tire sizes for your Volvo
Storing wheels and tires are specified to meet stringent stability
When storing complete wheels (tires mounted and handling requirements. Unap-
on rims), they should be suspended off the proved wheel/tire size combinations
floor or placed on their sides on the floor. can negatively affect your vehicle's sta-
bility and handling. Approved tire sizes
Tires not mounted on rims should be stored on are shown in the Tire inflation pressure
their sides or standing upright, but should not tables, see page 175.
be suspended.
• Any damage caused by installation of
unapproved wheel/tire size combina-
CAUTION tions will not be covered by your new
vehicle warranty. Volvo assumes no
G020325
``
171
07 Wheels and tires
General information
tread wear as even as possible and will help Tread wear indicator
you get maximum mileage from your tires.
Ideally, tire rotation should be done the first
time after approximately 3,000 miles
(5, 000 km) and thereafter at 6,000 mile
(10,000 km) intervals.
Tire rotation should only be performed if front/
rear tire wear is fairly even and tread height is
above 1/16" (1.6 mm).
NOTE
Tire rotation is not included in regularly
G020323
scheduled maintenance and is performed
only at customer request, at additional
charge.
The tires have wear indicator strips running
Your Volvo retailer can also provide guidance across or parallel to the tread. The letters TWI
based on your particular driving circumstan- are printed on the side of the tire. When
ces. approximately 1/16" (1.6 mm) is left on the
tread, these strips become visible and indicate
that the tire should be replaced. Tires with less
than 1/16" (1.6 mm) tread offer very poor trac-
tion.
07
When replacing worn tires, it is recommended
that the tire be identical in type (radial) and size
as the one being replaced. Using a tire of the
same make (manufacturer) will prevent altera-
tion of the driving characteristics of the vehicle.
172
07 Wheels and tires
Tire inflation
WARNING
• Under-inflation is the most common
cause of tire failure and may result in
severe tire cracking, tread separation,
or "blowout," with unexpected loss of
vehicle control and increased risk of
injury.
• Under-inflated tires reduce the load car-
G032520
G032513 rying capacity of your vehicle.
``
173
07 Wheels and tires
Tire inflation
Checking tire pressure 2. Add air to reach the recommended air 99 = 1709 lbs (755 kg).
pressure
Cold tires Speed ratings
Inflation pressure should be checked when the 3. Replace the valve cap. The speed ratings in the tables translate as fol-
tires are cold. 4. Repeat this procedure for each tire, includ- lows:
The tires are considered to be cold when ing the spare. M = 81 mph (130 km/h),
they have the same temperature as the sur- 5. Visually inspect the tires to make sure there V = 149 mph (240 km/h),
rounding (ambient) air. are no nails or other objects embedded
that could puncture the tire and cause an W = 168 mph (270 km/h).
This temperature is normally reached after the
car has been parked for at least 3 hours. air leak. See also page 177 for an explanation of the
6. Check the sidewalls to make sure there are designations on the sidewall of the tire.
After driving a distance of approximately 1 mile
(1.6 km), the tires are considered to be hot. If no gouges, cuts, bulges or other irregular-
you have to drive farther than this distance to ities.
pump your tire(s), check and record the tire
pressure first and add the appropriate air pres- NOTE
sure when you get to the pump. • If you overfill the tire, release air by
If checking tire pressure when the tire is hot, pushing on the metal stem in the center
never "bleed" or reduce air pressure. The tires of the valve. Then recheck the pressure
are hot from driving and it is normal for pres- with your tire gauge.
sures to increase above recommended cold • Some spare tires require higher inflation
pressures. A hot tire at or below recommended pressure than the other tires. Consult
cold inflation pressure could be significantly the tire inflation tables, see page 175,
under-inflated. or see the inflation pressure placard.
07
To check inflation pressure:
Load ratings
1. Remove the cap from the valve on one tire,
The load ratings in the tables above translate
then firmly press the tire gauge onto the
as follows:
valve.
91 = 1365 lbs (615 kg),
93 = 1433 lbs (650 kg),
174
07 Wheels and tires
Tire inflation pressure table tion placard for information specific to the tires
The following tire pressures are recommended installed on your vehicle at the factory.
by Volvo for your vehicle. Refer to the tire infla-
07
175
07 Wheels and tires
Tire inflation pressure table tion placard for information specific to the tires
The following tire pressures are recommended installed on your vehicle at the factory.
by Volvo for your vehicle. Refer to the tire infla-
176
07 Wheels and tires
Tire designations
Tire designations 215: The width of the tire (in millimeters) M+S or M/
from sidewall edge to sidewall edge. The S = Mud and Snow, AT = All Terrain, AS =
7 9 larger the number, the wider the tire. All Season
65: The ratio of the tire's height to its width. U.S. DOT Tire Identification Number
(TIN): This begins with the letters "DOT"
6 R: Radial tire. and indicates that the tire meets all federal
8
15: The diameter of the wheel rim (in standards. The next two numbers or letters
5 10
inches). are the plant code where it was manufac-
4 11 tured, the next two are the tire size code
95: The tire's load index. In this example, a
and the last four numbers represent the
3 12 load index of 95 equals a maximum load of
week and year the tire was built. For exam-
1521 lbs (690 kg).
2 ple, 2501 means the 25th week of 2001.
H: The tire's speed rating, or the maximum The numbers in between are marketing
G026442
1 speed at which the tire is designed to be codes used at the manufacturer's discre-
driven for extended periods of time, carry- tion. This information helps a tire manufac-
ing a permissible load for the vehicle, and turer identify a tire for safety recall purpo-
Federal law mandates that tire manufacturers with correct inflation pressure. For exam- ses.
place standardized information on the sidewall ple, H indicates a speed rating of 130 mph
Tire Ply Composition and Material Used:
of all tires (see the illustration). (210 km/h).
Indicates the number of plies indicates or
The following information is listed on the tire the number of layers of rubber-coated fab-
sidewall: NOTE ric in the tire tread and sidewall. Tire man-
This information may not appear on the tire ufacturers also must indicate the ply mate-
The tire designation:
because it is not required by law. rials in the tire and the sidewall, which
include steel, nylon, polyester, and others. 07
NOTE
Maximum Load: Indicates the maximum
Please be aware that the following tire des- load in pounds and kilograms that can be
ignation is an example only and that this carried by the tire. Refer to the vehicle's tire
particular tire may not be available on your
information placard located on the B-Pillar
vehicle.
or the driver's door for the correct tire pres-
sure for your vehicle.
``
177
07 Wheels and tires
Tire designations
07
178
07 Wheels and tires
Terminology • B-pillar: The structural member at the side B-pillar and in the tire inflation table in this
• Tire information placard: A placard of the vehicle behind the front door. chapter.
showing the OE (Original Equipment) tire • Bead area of the tire: Area of the tire next • Cold tires: The tires are considered to be
sizes, recommended inflation pressure, to the rim. cold when they have the same temperature
and the maximum weight the vehicle can • Sidewall of the tire: Area between the as the surrounding (ambient) air. This tem-
carry. bead area and the tread. perature is normally reached after the car
• Tire Identification Number (TIN): A num- has been parked for at least 3 hours.
• Tread area of the tire: Area of the perim-
ber on the sidewall of each tire providing eter of the tire that contacts the road when Properly loading your vehicle will provide maxi-
information about the tire brand and man- mounted on the vehicle. mum return of vehicle design performance.
ufacturing plant, tire size and date of man-
ufacturer. • Rim: The metal support (wheel) for a tire or
a tire and tube assembly upon which the
• Inflation pressure: A measure of the tire beads are seated.
amount of air in a tire.
• Maximum load rating: a figure indicating
• Standard load: A class of P-metric or Met- the maximum load in pounds and kilo-
ric tires designed to carry a maximum load grams that can be carried by the tire. This
at 35 psi [37 psi (2.5 bar) for Metric tires]. rating is established by the tire manufac-
Increasing the inflation pressure beyond turer.
this pressure will not increase the tires load
carrying capability. • Maximum permissible inflation pres-
sure: the greatest amount of air pressure
• Extra load: A class of P-metric or Metric that should ever be put in the tire. This limit
tires designed to carry a heavier maximum is set by the tire manufacturer.
load at 41 psi [43 psi (2.9 bar) for Metric
tires]. Increasing the inflation pressure • Recommended tire inflation pressure:
beyond this pressure will not increase the inflation pressure, established by Volvo,
which is based on the type of tires that are 07
tires load carrying capability.
mounted on a vehicle at the factory. This
• kPa: Kilopascal, a metric unit of air pres- inflation pressure is affected by the number
sure. of occupants in the car, the amount of
• PSI: Pounds per square inch, a standard cargo, and the speed at which the vehicle
unit of air pressure. will be driven for a prolonged period. This
information can be found on the tire infla-
tion placard(s) located on the driver's side
179
07 Wheels and tires
Vehicle loading
180
07 Wheels and tires
Uniform tire quality gradings faces of asphalt and concrete. A tire marked C WARNING
ALL PASSENGER VEHICLE TIRES MUST may have poor traction performance. The trac-
tion grade assigned to this tire is based on The temperature grade for this tire is estab-
CONFORM TO FEDERAL SAFETY lished for a tire that is properly inflated and
REQUIREMENTS IN ADDITION TO THESE braking (straight-ahead) traction tests and is
not overloaded. Excessive speed, under-
GRADES not a measure of cornering (turning) traction. inflation, or excessive loading, either sepa-
rately or in combination, can cause heat
Quality grades can be found, where appli-
WARNING buildup and tire failure.
cable, on the tire sidewall between the tread
shoulder and maximum section width. For The traction grade assigned to this tire is
example: based on braking (straight-ahead) traction
tests and is not a measure of cornering
Treadwear 200 Traction AA (turning) traction.
Temperature A
TEMPERATURE
TREADWEAR The temperature grades are AA (the highest),
The treadwear grade is a comparative rating A, B, and C, representing the tire's resistance
based on the wear rate of the tire when tested to the generation of heat and its ability to dis-
under controlled conditions on a specified gov- sipate heat when tested under controlled con-
ernment test course. For example, a tire gra- ditions on a specified indoor laboratory test
ded 150 would wear one and one half (1 1/2) wheel. Sustained high temperature can cause
times as well on the government course as a the material of the tire to degenerate and
tire graded 100. The relative performance of reduce tire life, and excessive temperature can
tires depends upon the actual conditions of lead to sudden tire failure. The grade C corre-
their use, however, and many depart signifi- sponds to a minimum level of performance that
cantly from the norm due to variation in driving all passenger vehicle tires must meet under the 07
habits, maintenance practices and differences Federal Motor Safety Standard No. 109.
in road characteristics and climate. Grades B and A represent higher levels of per-
formance on the laboratory test wheel than the
TRACTION
minimum required by law.
The traction grades, from highest to lowest, are
AA, A, B, and C, as measured under controlled
conditions on specified government test sur-
181
07 Wheels and tires
182
07 Wheels and tires
Temporary spare
Temporary spare
The spare tire in your vehicle1 is called a "Tem-
porary Spare".
Recommended tire pressure (see the placard
on the B-pillar or on the fuel filler door) should
be maintained irrespective of which position on
the car the temporary spare tire is used.
In the event of damage to this tire, a new one
can be purchased from your Volvo retailer.
WARNING
Current legislation prohibits the use of the
"Temporary Spare" tire other than as a tem-
porary replacement for a punctured tire. It
must be replaced as soon as possible by a
standard tire. Road holding and handling
may be affected with the "Temporary
Spare" in use. Do not exceed a speed of
50 mph (80 km/h) with the "Temporary
Spare" in use.
CAUTION
The car must not be driven with wheels of 07
different dimensions or with a spare tire
other than the one that came with the car.
The use of different size wheels can seri-
ously damage your car's transmission.
183
07 Wheels and tires
Wheel nuts
G020324
NOTE
This nut can also be used on steel wheels.
184
07 Wheels and tires
Changing a wheel
Changing a wheel
G020332
G020331
``
185
07 Wheels and tires
Changing a wheel
186
07 Wheels and tires
``
G020400
• Keep out of reach of children.
• Do not ingest the contents.
1. Return the tire sealing system to its storage Speed limit sticker • Avoid prolonged or repeated contact
position. with the skin.
On/Off switch
2. Put the retaining bracket in its proper posi- • Hands should be washed thoroughly
tion. Electrical wire after handling.
3. Tighten the screw that holds the bracket in Bottle holder (orange cover) First aid:
place.
Protective hose cover
• Skin: Wash affected areas of skin with
Be sure the bracket is correctly installed and soap and water. Get medical attention
07 the screw tightened to help keep the tire seal- Air release knob if symptoms occur.
ing system from rattling. • Eyes: Flush with plenty of water for least
Hose 15 minutes, occasionally lifting the
Bottle with sealing compound
Air pressure gauge
188
07 Wheels and tires
upper and lower eyelids. Get medical NOTE 4. Put on the gloves included in the tire seal-
attention if symptoms occur. ing system.
Do not remove any foreign objects (nails,
• Inhalation: Move the person to fresh air. etc.) from the tire before using the sealing
If irritation persists, get medical atten- system. WARNING
tion.
Contact with the sealing compound may
• Stage 2: The tire’s inflation pressure is cause skin irritation. If contact occurs, wash
checked and adjusted if necessary. the affected area immediately with soap and
Tire sealing system–temporarily water.
repairing a flat tire
WARNING
5. Unscrew the orange cover over the bottle
• Never leave the tire sealing system holder and unscrew the cap on the bottle
unattended when it is operating. of sealing compound.
• Keep the tire sealing system away from
children. NOTE
• Be sure the vehicle is parked safely off Do not break the seal on the bottle. This
the road and away from moving traffic. occurs automatically when the bottle is
• Apply the parking brake. screwed into the holder.
Stage 1: Sealing the hole 6. Screw the bottle into the bottle holder.
1. Open the cover on the tire sealing kit.
G019723
WARNING
2. Peel off the speed limit sticker and affix it
to the steering wheel hub where it will be The bottle is equipped with a catch to keep
clearly visible to the driver. it securely in place and help prevent sealing 07
Temporarily repairing a flat tire is done in two compound leakage. Once in place, the bot-
stages: 3. Ensure that the on/off switch is in posi- tle cannot be unscrewed. This must be done
• Stage 1: The hole is sealed by pumping tion 0 (the 0 side of the switch should be by a trained and qualified Volvo service
sealing compound into the tire. The car is pressed down). technician.
then driven a short distance to distribute
the sealing compound in the tire.
``
189
07 Wheels and tires
7. Remove the valve cap from the tire’s infla- NOTE 12. Switch off the compressor and disconnect
tion valve and screw the tire sealing sys- the electrical wire from the 12-volt socket.
tem’s hose connector onto the valve as The air pressure gauge will temporarily
show an increase in pressure to approxi- 13. Unscrew the hose from the tire’s inflation
tightly as possible by hand.
mately 88 psi (6 bar) while the sealing com- valve and reinstall the valve cap.
8. Connect the electrical wire to the nearest pound is being pumped into the tire. The
pressure should return to a normal level 14. Immediately drive the vehicle for approxi-
12-volt socket in the vehicle.
after approximately 30 seconds. mately 2 miles (3 km) at a maximum speed
9. Start the vehicle’s engine. of 50 mph (80 km/h) to distribute the seal-
ing compound in the tire.
10. Start the tire sealing system’s compressor 11. Within seven minutes, inflate the tire to
by pressing the on/off switch to position I. between 22—44 psi (1.8—3.0 bar). Switch
off the compressor briefly to get a clear CAUTION
WARNING reading from the pressure gauge. The If your vehicle is equipped with the Tire
compressor should not be used for more Pressure Monitoring System (TPMS), the
• Never stand next to the tire being inflated
than 10 minutes at a time to avoid over- use of the sealing compound may lead to
when the compressor is in operation. incorrect tire pressure readings or in rare
heating.
• If cracks, bubbles, etc. form on the tire, cases, damage to the tire pressure sensor.
switch off the compressor immediately. Use the tire sealing system to check and
CAUTION adjust the damaged tire's inflation pressure.
• If there is visible damage to the sidewall
or the rim, the tire cannot be repaired. The compressor should not be used for
more than 10 minutes at a time to avoid
The vehicle should not be driven if this
overheating.
NOTE
occurs. Contact a towing service or
Volvo On Call Roadside Assistance if • Safely stow the tire sealing system in a
applicable. convenient place as it will soon be used
WARNING again to check the tire’s inflation pres-
07 If the pressure remains below 22 psi sure.
(1.8 bar) after approximately seven minutes, • The empty bottle of sealing compound
turn off the compressor. In this case, the cannot be removed from the bottle
hole is too large to be sealed and the vehicle holder. Consult a trained and qualified
should not be driven.
Volvo service technician to have the
bottle removed and properly disposed
of.
190
07 Wheels and tires
``
191
07 Wheels and tires
CAUTION
The compressor should not be used for
more than 10 minutes at a time to avoid
overheating.
192
07 Wheels and tires
``
193
07 Wheels and tires
NOTE will erase the warning text and the warning Volvo does not recommend moving sen-
light will go out. sors back and forth between sets of
• TPMS indicates low tire pressure but wheels.
does not replace normal tire mainte-
WARNING
nance. For information on correct tire NOTE
pressure, please refer to the tables Incorrect inflation pressure could lead to tire
beginning on page 175, or consult your failure, resulting in a loss of control of the • If you change to tires with a different
Volvo retailer. vehicle. recommended inflation pressure, the
TPMS system must be recalibrated to
• The tire pressure warning light will not
these tires. This must be done by an
identify which tire is underinflated. Be Changing wheels with TPMS
sure to check all four tires. authorized Volvo retailer or workshop.
Please note the following when changing or
• A certain amount of air seepage from replacing the factory installed TPMS wheels/ • If a tire is changed, or if the TPMS sen-
the tires occurs naturally and tire pres- tires on the vehicle: sor is moved to another wheel, the sen-
sure fluctuates with seasonal changes sor's seal, nut, and valve core should be
• Only the factory-mounted wheels are replaced.
in temperature. Always check tire pres- equipped with TPMS sensors in the valves.
sure regularly. • When installing TPMS sensors, the
• If the vehicle is equipped with a temporary vehicle must be parked for at least
spare tire, this tire does not have a TPMS 15 minutes with the ignition off. If the
Erasing warning messages sensor. vehicle is driven within 15 minutes, a
When a low tire pressure warning message has • If wheels without TPMS sensors are moun- TPMS error message will be displayed.
been displayed, and the tire pressure warning ted on the vehicle, TIRE PRESS SYST
light has come on: SERVICE REQUIRED will be displayed
each time the vehicle is driven above CAUTION
1. Use a tire pressure gauge to check the
inflation pressure of all four tires. 25 mph (40 km/h) for 10 minutes or more. When inflating tires with TPMS valves, press
07 • Once TPMS sensors are properly installed, the pump's mouthpiece straight onto the
2. Re-inflate the tire(s) to the correct pressure valve to help avoid bending or otherwise
the warning message should not reappear.
(consult the tire pressure placard or the damaging the valve.
If the message is still displayed, drive the
tables, see page 175 ).
vehicle for several minutes at a speed of
3. In certain cases, it may be necessary to 20 mph (30 km/h) or faster to erase the
drive the vehicle for several minutes at a message.
speed of 20 mph (30 km/h) or faster. This • Volvo recommends that TPMS sensors be
fitted on all wheels used on the vehicle.
194
07 Wheels and tires
07
195
Washing and cleaning the car............................................................... 198
G020920
Paint touch up....................................................................................... 202
196
CAR CARE
08
08 Car care
Washing the car considerably and also helps prolong the CAUTION
The following points should be kept in mind service life of the wiper blades.
when washing and cleaning the car: • Wash off the dirt from the underside (wheel • Avoid waxing or polishing plastic or rub-
ber components
housings, fenders, etc).
• The car should be washed at regular inter- • Polishing chromed strips can wear
vals since dirt, dust, insects and tar spots • In areas of high industrial fallout, more fre- away or damage the surface
adhere to the paint and may cause dam- quent washing is recommended.
age. To help prevent corrosion, it is partic- • Polishes containing abrasive sub-
ularly important to wash the car frequently NOTE stances should not be used
in the wintertime when salt has been used
When washing the car, remember to remove
on the roads. CAUTION
dirt from the drain holes in the doors and
• Avoid washing your car in direct sunlight. sills.
Doing so may cause detergents and wax • During high pressure washing, the
to dry out and become abrasive. To avoid spray mouthpiece must never be closer
scratching, use lukewarm water to soften
Exterior components to the vehicle than 13" (30 cm). Do not
the dirt before you wash with a soft Volvo recommends the use of special cleaning spray into the locks.
sponge, and plenty of sudsy water. products, available at your Volvo retailer, for • Dirt, snow, etc., on the headlights can
cleaning colored plastic, rubber, or ornamental reduce lighting capacity considerably.
• Bird droppings: Remove from paintwork components such as chromed strips on the Clean the headlights regularly, for
as soon as possible. Otherwise the finish
exterior of your vehicle. The instructions for example when refueling.
may be permanently damaged.
using these products should be followed care- Special moonroof cautions:
• A detergent can be used to facilitate the fully. Solvents or stain removers should not be
softening of dirt and oil. used. • Always close the moonroof* and sun
• Dry the car with a clean chamois and shade before washing your vehicle.
remember to clean the drain holes in the • Never use wax on the rubber seals
doors and rocker panels. around the moonroof.
• Tar spots can be removed with tar remover • Never use abrasive cleaning agents on
after the car has been washed. the moonroof.
• A stiff-bristle brush and lukewarm soapy •
08 water can be used to clean the wiper
blades. Frequent cleaning of the wind-
shield and wiper blades improves visibility
Automatic washing – simple and quick WARNING • Waxing alone does not substitute for pol-
We do NOT recommend washing your car in an ishing a dull surface.
automatic wash during the first six months • When the car is driven immediately after
• A wide range of polymer-based waxes can
(because the paint will not have hardened suf- being washed, apply the brakes several
be purchased today. These waxes are easy
times in order to remove any moisture
ficiently). to use and produce a long-lasting, high-
from the brake linings.
gloss finish that protects the bodywork
An automatic wash is a simple and quick way
• Engine cleaning agents should not be against oxidation, road dirt and fading.
to clean your car, but it is worth remembering used when the engine is warm. This
that it may not be as thorough as when you constitutes a fire risk.
• Do not polish or wax your vehicle in direct
yourself go over the car with sponge and water. sunlight (the surface of the vehicle should
Keeping the underbody clean is most impor- not be warmer than 113 °F (45 °C).
tant, especially in the winter. Some automatic Exterior lighting
washers do not have facilities for washing the Condensation may form temporarily on the CAUTION
underbody. inside of the lenses of exterior lights such as
Volvo does not recommend the use of long-
headlights, fog lights, or taillights. This is nor-
life or durable paint protection coatings,
mal and the lights are designed to withstand some of which may claim to prevent pitting,
CAUTION
moisture. Normally, condensation will dissi- fading, oxidation, etc. These coatings have
• Before driving into an automatic car pate after the lights have been on for a short not been tested by Volvo for compatibility
wash, turn off the optional rain sensor to time. with your vehicle's clear coat. Some of them
avoid damaging the windshield wipers. may cause the clear coat to soften, crack,
• Make sure that side view mirrors, auxil- Polishing and Waxing or cloud. Damage caused by application of
• Normally, polishing is not required during paint protection coatings may not be cov-
iary lamps, etc, are secure, and that any
the first year after delivery, however, wax- ered under your vehicle's paint warranty.
antenna(s) are retracted or removed.
Otherwise there is risk of the machine ing may be beneficial.
dislodging them • Before applying polish or wax the vehicle
• Chromed wheels: Clean chrome- must be washed and dried. Tar spots can
plated wheels using the same deter- be removed with kerosene or tar remover.
gents used for the body of the vehicle. Difficult spots may require a fine rubbing
Aggressive wheel-cleaning agents can compound.
permanently stain chrome-plated • After polishing use liquid or paste wax. 08
wheels. • Several commercially available products
contain both polish and wax.
``
199
08 Car care
Upholstery care Volvo also offers a special leather softener that This will help the leather resist staining and
should be applied after the cleaner and pro- protect against sunlight's harmful UV rays.
Fabric tectant. It leaves leather soft and smooth, and
Clean with soapy water or a detergent. For reduces friction between leather and other fin- CAUTION
more difficult spots caused by oil, ice cream, ishes in the vehicle.
shoe polish, grease, etc., use a clothing/fabric • Under no circumstances should gaso-
stain remover. Consult your Volvo retailer. Volvo recommends cleaning, protecting and line, naphtha or similar cleaning agents
conditioning your vehicle's leather two to four be used on the plastic or the leather
Interior plastic components times a year. Ask your Volvo retailer about since these can cause damage.
Cleaning interior plastic components should Leather Care Kit 951 0251 and Leather Soft- • Take extra care when removing stains
be done with a cleaning agent specially ener 943 7429. such as ink or lipstick since the coloring
designed for this purpose. Consult your Volvo Cleaning leather upholstery can spread.
retailer. 1. Pour leather cleaner on a damp sponge • Use solvents sparingly. Too much sol-
and squeeze it until the cleaner foams. vent can damage the seat padding.
Alcantera™ suede-like material
Suede-like upholstery can be cleaned with a 2. Apply the foam to the stain by moving the • Start from the outside of the stain and
soft cloth and mild soap solution. sponge with circular movements. work toward the center.
3. Dampen the stain thoroughly with the • Sharp objects (e.g. pencils or pens in a
Leather care pocket) or Velcro fasteners on clothing
Volvo's leather upholstery is manufactured sponge. Let the sponge absorb the stain,
may damage the textile upholstery.
with a protectant to repel soiling. Over time, do not rub.
sunlight, grease and dirt can break down the
• Clothing that is not colorfast, such as
4. Dry the stain with soft paper towels or a new jeans or suede garments, may stain
protection. Staining, cracking, scuffing, and towel, and allow the leather to dry com- the upholstery.
fading can result. pletely.
Volvo offers an easy-to-use, non-greasy Protecting leather upholstery
leather care kit formulated to clean and beau- 1. Put a small amount of protectant cream on
tify your vehicle's leather, and to renew the a cloth and apply a thin coating of cream
protective qualities of its finish. The cleaner to the upholstery with light circular move-
removes dirt and oil buildup. The light cream ments.
08 protectant restores a barrier against soil and
2. Allow the leather to dry for 20 minutes.
sunlight.
200
08 Car care
08
201
08 Car care
Paint touch up
Touching up minor paint damage Minor stone chips and scratches NOTE
Paint damage requires immediate attention to Material:
When touching up the vehicle, it should be
avoid rusting. Make it a habit to check the finish
regularly - when washing the vehicle for
• Primer – can clean and dry. The surface temperature
should be above 60° F (15° C).
instance. Touch-up if necessary. • Paint – touch-up pen
If the stone chip has not penetrated down
Paint repairs require special equipment and • Brush
to the metal and an undamaged layer of
skill. Contact a trained and authorized Volvo • Masking tape paint remains, the touch-up paint can be
service technician for any extensive damage. applied as soon as the spot has been
Minor scratches can be repaired by using cleaned.
Volvo touch-up paint.
Deep scratches
Color code 1. Place a strip of masking tape over the dam-
aged surface. Pull the tape off so that any
loose flakes of paint adhere to it.
2. Thoroughly mix the primer and apply it with
a small brush. When the primer surface is
dry, the paint can be applied using a brush.
Mix the paint thoroughly; apply several thin
G020345
paint coats and let dry after each applica-
tion.
3. If there is a longer scratch, you may want
to protect surrounding paint by masking it
off.
G031024
202
08 Car care
08
203
Volvo maintenance................................................................................ 206
Maintaining your car............................................................................. 208
Hood..................................................................................................... 210
Engine compartment............................................................................. 211
Engine oil............................................................................................... 212
Fluids..................................................................................................... 214
Wiper blades......................................................................................... 216
Battery................................................................................................... 217
Replacing bulbs.................................................................................... 219
G020922
Fuses..................................................................................................... 227
204
MAINTENANCE AND SERVICING
09
09 Maintenance and servicing
09 Volvo maintenance
206
09 Maintenance and servicing
Volvo maintenance 09
207
09 Maintenance and servicing
Owner maintenance As needed: If a garage jack is used to lift the vehicle, the
Periodic maintenance requirements and inter- • Wash the car, including the undercarriage, two jack attachments points should be used.
vals are described in your vehicle's Warranty to reduce wear that can be caused by a They are specially reinforced to bear the weight
and Service Records Information booklet. buildup of dirt, and corrosion that can be of the vehicle. A garage jack can also be placed
caused by salt residues. under the front of the engine support frame.
The following points can be carried out Take care not to damage the splash guard
between the normally scheduled maintenance • Clean leaves and twigs from air intake
vents at the base of the windshield, and under the engine. Ensure that the jack is posi-
services. tioned so that the vehicle cannot slide off it.
from other places where they may collect.
Always use axle stands or similar structures.
Each time the car is refueled:
• Check the engine oil level. NOTE If a two-post hoist is used to lift the vehicle, the
• Clean the windshield, windshield wipers, Complete service information for qualified front and rear lift arm pads should be centered
headlights, and taillights. technicians is available online for purchase under the reinforced lift plates on the inboard
or subscription at www.volvotechinfo.com. edge of the sill rail (see illustration).
Monthly:
• Check cold tire pressure in all tires. Inspect Emission inspection readiness
the tires for wear. Hoisting the vehicle
• Check that engine coolant and other fluid What is an Onboard Diagnostic System
levels are between the indicated "min" and (OBD II)?
"max" markings. OBD II is part of your vehicle's computerized
• Clean interior glass surfaces with a glass engine management system. It stores diagnos-
cleaner and soft paper towels. tic information about your vehicle's emission
• Wipe driver information displays with a soft controls. It can light the Check Engine light
cloth. (MIL) if it detects an emission control "fault." A
"fault" is a component or system that is not
• Visually inspect battery terminals for cor- performing within an expected range. A fault
rosion. Corrosion may indicate a loose ter-
may be permanent or temporary. OBD II will
minal connector, or a battery near the end
store a message about any fault.
of its useful service life. Consult a trained
and qualified Volvo service technician for
additional information.
208
09 Maintenance and servicing
How Do States Use OBD II for Emission your vehicle diagnosed and, if necessary,
Inspections? serviced by a qualified Volvo technician.
Many states connect a computer directly to a • If you recently had service for a lit Check
vehicle's OBD II system. The inspector can Engine light, or if you had service that
then read "faults." In some states, this type of required disconnecting the battery, a
inspection has replaced the tailpipe emission period of driving is necessary to bring the
test. OBD II system to "ready" for inspection. A
half-hour trip of mixed stop-and-go/high-
How Can My Vehicle Fail OBD II Emission way driving is typically needed to allow
Inspection? OBD II to reach readiness. Your Volvo
Your vehicle can fail OBD II emission inspec- retailer can provide you with more infor-
tion for any of the following reasons. mation on planning a trip.
• If your Check Engine (MIL) light is lit, your • Maintain your vehicle in accordance with
vehicle may fail inspection. your vehicle's maintenance schedule.
209
09 Maintenance and servicing
09 Hood
G031032
WARNING
Check that the hood locks engage properly
when closed.
210
09 Maintenance and servicing
Engine compartment 09
G026456
Cooling system expansion tank Relay/fuse box
Power steering fluid reservoir (concealed Air cleaner
behind the headlight)
Dipstick – engine oil WARNING
Radiator The cooling fan may start or continue to
operate (for up to 6 minutes) after the engine
Cooling fan has been switched off.
Washer fluid reservoir
Engine oil filler cap
Brake/clutch fluid reservoir
Battery
211
09 Maintenance and servicing
09 Engine oil
NOTE
• Volvo does not recommend the use of
oil additives.
• Synthetic oil is not used when the oil is
G020338
G020336
changed at the normal maintenance
intervals except at owner request and at
additional charge. Please consult a Location of dipstick and oil filler cap
trained and qualified Volvo service tech- CAUTION
nician. Checking the oil
1. Pull out the dipstick and wipe it with a lint- • Not checking the oil level regularly can
free rag. result in serious engine damage if the oil
Checking and adding oil level becomes too low.
The oil level should be checked every time the 2. Reinsert the dipstick, pull it out, and check
vehicle is refueled. This is especially important the oil level. • Oil that is lower than the specified qual-
ity can damage the engine.
during the period up to the first scheduled 3. Add oil if necessary. If the level is close to
maintenance service the MIN mark, add approximately • Always add oil of the same type and
viscosity as already used.
• The car should be parked on a level surface 1 US quart (1 liter) of oil.
when the oil is checked. • Never fill oil above the MAX mark. This
4. Run the engine until it reaches normal could cause an increase in oil consump-
• If the engine is warm, wait for at least operating temperature. tion.
10–15 minutes after the engine has been
5. Switch off the engine and wait for at least
switched off before checking the oil.
10–15 minutes and recheck the oil level. If
necessary, add oil until the level is near the
MAX mark.
212
09 Maintenance and servicing
Engine oil 09
WARNING
Do not allow oil to spill onto or come into
contact with hot exhaust pipe surfaces
NOTE
Volvo uses different systems to indicate a
low oil level or pressure. Some models have
an oil pressure sensor, in which case a
warning symbol (see page 57) is used to
indicate low oil pressure. Other models have
an oil level sensor, in which case the driver
is alerted by the warning symbol in the cen-
ter of the instrument panel and a text in the
information display. Some models use both
systems. Contact an authorized Volvo
retailer for more information.
213
09 Maintenance and servicing
09 Fluids
G020334
• The cooling system must always be
kept filled to the correct level, and the
level must be between the MIN and
Washer fluid reservoir Coolant reservoir
MAX marks. If it is not kept filled, there
The washer fluid reservoir is located in the Normally, the coolant does not need to be can be high local temperatures in the
engine compartment and holds approximately changed. If the system must be drained, con- engine which could result in damage.
6.8 US qts (6.5 liters). During cold weather, the sult a trained and qualified Volvo service tech- Check coolant regularly!
reservoir should be filled with windshield nician. • Do not top up with water only. This
washer solvent containing antifreeze. reduces the rust-protective and anti-
freeze qualities of the coolant and has a
lower boiling point. It can also cause
damage to the cooling system if it
should freeze.
• Do not use chlorinated tap water in the
vehicles cooling system.
214
09 Maintenance and servicing
Fluids 09
215
09 Maintenance and servicing
09 Wiper blades
G020330
G007444
1. Fold out the wiper arm. 1. Fold out the wiper arm.
2. Press the button on the wiper blade attach- 2. Remove the wiper blade by pulling it
ment and pull straight out (1), parallel with straight out from the wiper arm.
the wiper arm. 3. Press the new wiper blade securely into
place.
3. Press a new wiper blade (2) until it clicks
into place. Fold in the wiper arm.
4. Ensure the blade is securely attached (3). Keeping the windshield/liftgate window and
wiper blades clean helps improve visibility and
5. Fold in the wiper arm. prolongs the service life of the wiper blades.
The wiper blades are different lengths. The See page 198 for washing instructions.
blade on the driver's side is longer than the one
on the passenger's side.
G020329
216
09 Maintenance and servicing
Battery 09
Battery maintenance • To help keep the battery in good condition, Battery symbols
Driving habits and conditions, climate, the the vehicle should be driven for at least 15 Wear protection goggles
number of starts, etc., all affect the service life minutes a week or connected to a charger
and function of the battery. In order for your with an automatic charging function.
battery to perform satisfactorily, keep the fol- • If the battery is fully discharged a number
lowing in mind: of times, this may shorten its service life.
Keeping the battery fully charged helps
Check the fluid level in each cell in the battery prolong its service life.
every 24 months or every 15,0001 miles See owner's manual for
(24,000 km), whichever is sooner. • The service life of a battery is affected by details
factors such as driving conditions and cli-
• Use a screw driver to open the caps or mate. Extreme cold may also further
cover and a flashlight to inspect the level. decrease the battery’s starting capacity.
• If necessary, add distilled water. The level • Because the battery’s starting capacity
should never be above the indicator. decreases with time, it may be necessary
• The fluid level should be checked if the to recharge it if the vehicle is not driven for Keep away from children
battery has been recharged. an extended period of time or if the vehicle
is usually only driven short distances.
• After inspection, be sure the cap over each
battery cell or the cover is securely in •
place.
• Check that the battery cables are correctly WARNING
connected and properly tightened. PROPOSITION 65 WARNING! Corrosive
• Never disconnect the battery when the Battery posts, terminals, and related acces-
engine is running, or when the key is in the sories contain lead and lead compounds,
ignition. This could damage the vehicle's chemicals known to the state of California
electrical system. to cause cancer and reproductive harm.
Wash hands after handling.
• The battery should be disconnected from
the vehicle when a battery charger is used
directly on the battery.
217
09 Maintenance and servicing
09 Battery
218
09 Maintenance and servicing
Replacing bulbs 09
Introduction Removing the headlight housing light, turn signal, and side marker bulbs. To lift
Before replacing bulbs in your vehicle, please out the housing:
keep the following points in mind: WARNING 1. Remove the key from the ignition and turn
• The engine should not be running when the headlight switch to position .
NOTE changing bulbs.
2. Open the hood.
Never touch the glass of bulbs with your fin- • When changing in the headlight hous-
gers. Grease and oils from your fingers ing, if the engine has been running just 3. Pull up the headlight housing's retaining
vaporize in the heat and will leave a deposit prior to replacing bulbs, please be pin.
on the reflector, which will damage it. aware that components in the engine 4. Pull out the headlight housing.
The optional Dual Xenon headlight bulbs compartment will be hot.
contain trace amounts of mercury. These
bulbs should always be disposed of by a
trained and qualified Volvo service techni-
cian.
Certain bulbs should only be replaced by a
4
trained and qualified Volvo service techni-
cian:
• Courtesylighting
• Reading lights
• Glove compartment lights
• Turn signals and courtesy lights in the
G007612
side door mirrors
G007334
• High-mounted brake lights
• Dual Xenon headlights, Brake lights
5. Disconnect the wiring connector by press-
ing down the clip with your thumb while at
The entire headlight housing must be lifted out
the same time pulling the connector with
when replacing the high/low beam, parking
your other hand.
``
219
09 Maintenance and servicing
09 Replacing bulbs
6. Lift out the headlight housing and place it Low beam bulb
on a soft surface to avoid scratching the
lens.
CAUTION
When disconnecting the connector, pull on
the connector itself and not on the wiring.
G007339
G020255
WARNING
Dual Xenon headlights* – due to the high Low beam bulb
voltage used by these headlights, these Cover with retaining clamps
bulbs should only be replaced by a trained Installing a new bulb
and qualified Volvo service technician. 1. Open the hood and remove the headlight 1. Insert the new bulb. It can only be installed
housing (see page 219 for instructions). in one position.
2. Release the retaining clamps on the cover. 2. Press the retaining spring inward and
3. Release the bulb's retaining spring holding upward and slightly to the right until it
the bulb in place by pressing it first to the snaps into place.
left and then moving it outward and down- 3. Press the wiring connector onto the bulb.
ward.
4. Put the plastic cover in place.
4. Pull out the bulb. 5. Press the retaining clamps back into place.
6. Reinstall the headlight housing (see
page 219).
Replacing bulbs 09
G007392
bulb.
5. Reinstall the bulb holder. It can only be
Halogen high beam bulb installed in one position. 1. Pull out the bulb holder with a pair of pliers.
1. Open the hood. 6. Reinstall the headlight housing (see The bulb holder should not be pulled out
2. Remove the headlight housing (see page 219). by the wire.
page 219). 2. Replace the bulb.
3. Press the bulb holder back into place. It
NOTE can only be installed in one position.
The halogen high beam bulb has a different
socket on vehicles equipped with the
optional Dual Xenon headlights. On these
models, pull the bulb straight out.
``
09 Replacing bulbs
G007393
G007394
G020348
1. Turn the bulb holder counterclockwise and 1. Turn the bulb holder counterclockwise,
1. Switch off all lights and turn the key to
remove it. pull it out, and replace the bulb.
position 0.
2. Remove the bulb from the holder by press- 2. Reinstall the bulb holder. It can only be
2. Remove the panel around the fog light
ing it in and twisting it counterclockwise. installed in one position.
housing.
3. Insert a new bulb and reinstall the bulb
3. Unscrew both torx screws in the fog light
holder in the headlight housing.
housing and remove it.
4. Disconnect the connector from the bulb.
5. Turn the bulb counterclockwise and pull it
out.
6. Install the new bulb in its seat and turn it
clockwise.
7. Reconnect the connector to the bulb.
Replacing bulbs 09
8. Secure the fog light housing with the 3. Disconnect the wiring connector from the Brake light (LED)1
screws and press the panel back into affected bulb holder.
place. Taillight/parking light/fog light (driver’s
4. Press the catches together and pull out the side only)
bulb holder.
Taillight/parking light
Removing the taillight bulb holder 5. Replace the defective bulb.
Turn signal
6. Press the wiring connector back into posi-
tion. Back-up light
7. Press the bulb holder into place and rein- Taillight/parking light
stall the cover.
NOTE
Location of taillight bulbs
If the message indicating a burned out bulb
remains in the information display after the
bulb has been replaced, consult a trained
and qualified Volvo service technician.
G007402
G007395
position 0.
2. Remove the covers (A or B) in the left/right
panels to access the bulb holders. Location of taillight bulbs
1 The wiring to the LED brake lights is permanently connected to the bulb holder. It should not be removed.
``
223
09 Maintenance and servicing
09 Replacing bulbs
G007634
G007447
G020795
1. Switch off all lights and turn the key to The grids are held in place by clips and can be The footwell lighting is located under the dash-
position 0. pressed into position. They can only be instal- board on the driver's and passenger's sides.
led one way. To replace a bulb:
2. Remove the screws with a screw driver.
1. Insert a screwdriver under the edge of the
3. Detach the lens (bulb housing) carefully.
lens. Turn the screwdriver gently to detach
4. Replace the defective bulb. the lens.
5. Reinstall the entire bulb housing and screw 2. Remove the defective bulb.
it into place.
3. Install a new bulb.
4. Press the lens back into place.
224
09 Maintenance and servicing
Replacing bulbs 09
Cargo area lighting Cabin lighting in the cargo area Vanity mirror lighting
G010326
G007613
G020253
1. Insert a screwdriver and turn it gently to The rear cabin lighting consists of a light on the 1. Insert a screwdriver under the center of the
detach the bulb housing. driver’s side of the cargo area lower edge of the mirror, turn it, and care-
1. Insert a screwdriver and turn it carefully to fully pry up the lugs at the edge.
2. Remove the defective bulb.
release the lens. 2. Move the screwdriver under the edge on
3. Install a new bulb.
2. Remove the connector from the bulb the left and right-hand sides (near the black
4. Press the bulb housing back into place. holder. rubber sections) and pry carefully to
release the lower edge of the mirror.
3. Replace the defective bulb.
3. Pry carefully and lift out the entire mirror
4. Press the lens back into place. and the cover.
4. Remove the defective bulb and replace it
with a new one.
5. To reinstall the mirror, begin by pressing
the three lugs at the upper edge of the mir-
ror back into place.
``
225
09 Maintenance and servicing
09 Replacing bulbs
226
09 Maintenance and servicing
Fuses 09
Replacing fuses
There are relay/fuse boxes located in the
engine compartment and the passenger com-
partment.
If an electrical component fails to function, this
may be due to a blown fuse. The easiest way
to see if a fuse is blown is to remove it.
To do so:
1. Pull the fuse straight out. If a fuse is difficult
to remove, special fuse removal tools are
located on the inside of the fuse box cov-
ers.
2. From the side, examine the curved metal
wire in the fuse to see if it is intact.
3. If the wire is broken, insert a new fuse of
the same color and amperage (written on
the fuse).
If fuses burn out repeatedly, have the electrical
system inspected by a trained and qualified
Volvo service technician.
WARNING
Never use metal objects or fuses with higher
amperage than those stated on the follow-
ing pages. Doing so could seriously damage
or overload the vehicle's electrical system.
``
227
09 Maintenance and servicing
09 Fuses
G007446
The fuse box in the engine compartment has
positions for 36 fuses.
• Fuses 1–18 are relays/circuit breakers and
should only be removed or replaced by an
authorized Volvo service technician.
• Fuses 19–36 may be changed at any time
when necessary.
Several extra fuses and a fuse removal tool to
assist in removing/replacing fuses can be
found on the underside of the fuse box cover
in the engine compartment.
228
09 Maintenance and servicing
Fuses 09
G020250
1. Coolant fan (radiator) 50A 9. Engine functions 30A 17. Windshield wipers 30A
2. Power steering 80A 10. Climate system blower 40A 18. Feed to passenger com- 40A
partment fuse box
3. Feed to passenger com- 60A 11. Headlight washers 20A
partment fuse box 19. Not in use
12. Feed to heated rear window 30A
4. Feed to passenger com- 60A 20. Horn 15A
partment fuse box 13. Starter motor relay 30A
21. Not in use
5. Element, climate unit 80A 14. Trailer connector (acces- 40A
sory) 22. Not in use
6. Not in use
15. Not in use 23. Engine control module 10A
7. ABS pump 30A (ECM)/transmission control
16. Feed to audio system 30A module (TCM)
8. ABS valves 20A
``
229
09 Maintenance and servicing
09 Fuses
Fuses 09
G020601
The fuse box in the passenger compartment is 6. Pull the center pins fully out of the mount-
located under the glove compartment. ing clips, secure the upholstery with the
mounting clips and press the pins into the
To access the fuses:
mounting clips again. The mounting clips
1. Remove the upholstery covering the fuse then expand, holding the upholstery in
box by first pressing in the center pins in position.
the mounting clips approximately 0.5 in
(1 cm) with a small screwdriver and then
pulling the pins out.
2. Turn both retaining screws (2) counter-
clockwise until they release.
3. Fold down the fuse box (3) half way. Pull it
toward the seat until it stops. Fold it down
completely. The fuse box can be unhooked
completely.
4. Replace the blown fuse.
5. Close the fuse box in reverse order.
``
231
09 Maintenance and servicing
09 Fuses
G020246
- Fuse 37-42, not in use - 47. Interior lighting 5A 54. Park assist*, Dual Xenon 10A
headlights*
43. Audio system, Blue- 15A 48. Rear liftgate wiper/washer 15A
tooth,Volvo Navigation sys- 55. Not in use
tem* 49. Supplemental Restrain Sys- 10A
tem (SRS), Occupant 56. Volvo Navigation System 10A
44. Supplemental Restrain Sys- 10A Weight Sensor (OWS) remote key module, alarm
tem (SRS), engine control siren control module
module 50. Not in use
57. On-board diagnostic 15A
45. 12-volt socket in rear seat 15A 51. Fuel filter relay 10A socket, brake light switch
46. Lighting – glove compart- 5A 52. Transmission control mod- 5A 58. Right high beam, auxiliary 7.5A
ment, instrument panel, and ule (TCM), ABS lights relay
footwells 53. Power steering 10A 59. Left high beam 7.5A
Fuses 09
G020924
Bluetooth® hands-free connection....................................................... 254
234
AUDIO
10
10 Audio
Audio functions
Audio functions
5. Press MENU on the audio system, and Steering wheel keypad connector*
USB/iPod
navigate to AUX Volume or AUX Input
Volume. 10
G026424
Volume
Use the volume dial (1) or the buttons in the
steering wheel keypad to adjust the volume Steering wheel keypad
level. The volume level is also adjusted auto- An auxiliary device, such as an iPod, MP3
matically according to the vehicle's speed, see The four buttons on the steering wheel keypad player or a USB flash drive can be connected
page 239 for more information on this func- can be used to control the audio system. The to the audio system via the connector in the
tion. steering wheel keypad can be used to adjust center console storage compartment. A stand-
volume, shift between preset stations and ard cable from an iPod or MP3 player can be
change CD tracks. Press one of the two left- routed under the cover to the AUX connector
hand buttons briefly to change to the next/pre- in the storage compartment.
vious preset radio station, or to go to the next/
previous track on a CD. Press and hold down A sound source must be chosen, depending on
these buttons to search within a track on a CD. the device that has been connected:
1. Use MODE to select iPod or USB. The text
Daytime/twilight display
CONNECT DEVICE will be displayed.
In daylight the information is displayed against
a light background. In darkness it is displayed 2. Connect the device to the connector in the
against a dark background. center console storage compartment (see
the illustration).
``
Audio functions
238
10 Audio
Audio functions
``
239
10 Audio
Audio functions
1 Default setting.
240
10 Audio
Radio functions
Radio function controls EXIT–press to cancel a menu selection or Storing preset stations
a selected function
Manually storing a station 10
AUTO–search for and store the strongest
1. Tune to the desired station.
radio stations in the area in which you are
driving 2. Press and hold the preset button under
which the station is to be stored. The audio
Searching for stations system sound will be interrupted for a few
There are two ways to manually tune a radio seconds and STATION STORED will
station: appear in the display.
Turn the TUNING dial (3) to the desired fre-
quency. NOTE
Press the left or right arrow key on the A total of 30 stations can be stored; 10 sta-
tions each in AM, FM1 and FM2.
G026366
``
241
10 Audio
Radio functions
When the search is completed, AUTO down the button until STATION down the button until STATION
STORING will no longer be displayed. If there STORED is displayed. STORED is displayed.
10 are no stations with sufficient signal strength,
The radio will then exit auto-store mode and The SCAN function will be deactivated and the
NO AST FOUND is displayed. the stored station can be selected by pressing station can be selected by pressing the preset
The auto-stored stations can be selected using the preset button. button.
the preset buttons (2).
Press EXIT (6) to terminate the automatic Scanning Radio text
storing function. SCAN (4) automatically searches through the Certain stations broadcast program informa-
When the radio is in auto-store mode, AUTO is selected waveband for strong AM or FM sta- tion, which can be shown in the display.
shown in the display. AUTO disappears when tions. When the radio finds a station, that sta-
To start this function:
you return to normal radio mode, which can be tion will be played for approximately 8 sec-
onds, after which scanning resumes. 1. Select FM1 or FM2 and press the MENU
done by briefly pressing AM/FM (1), EXIT (6),
button.
or AUTO (7). Activating/deactivating SCAN
2. Press ENTER.
To return to the Auto-store mode, press the 1. Select radio mode using the AM/FM but-
AUTO button briefly and select a stored station ton (2). 3. Select RADIOTEXT in the menu and press
by pressing one of the preset buttons (2). 2. Press SCAN to activate the function. ENTER.
Saving auto-stored stations in the preset SCAN is shown in the display. To deactivate this function, select
memory 3. Press the SCAN or EXIT button to deacti- RADIOTEXT again and press ENTER.
An auto-stored station can be saved in the vate the scan function and listen to the
memory for manually preset stations. selected station.
1. Press AUTO (7) briefly. Storing a station found with SCAN
> Auto is displayed. A station can be stored as a preset while the
2. Press one of the preset buttons (2) under SCAN function is activated.
which the station is to be stored. Hold Press one of the preset buttons (2) under
which the station is to be stored. Hold
242
10 Audio
Radio functions
243
10 Audio
Radio functions
channels will be displayed as 93.9 – 2 NOTE 3. Press ENTER to turn HD off (the X will dis-
WNYC, 93.9 - 3 WNYC, etc. appear from the box on the display screen).
10 There may be a noticeable difference in
• Reception coverage area: Due to current sound quality when a change from analogue This will disable the radio's capability to receive
IBOC transmitter power limitations, the to digital or digital to analogue occurs, such digital broadcasts but it will continue to func-
reception coverage area in digital mode is as: tion as a conventional (analogue) AM/FM
somewhat more limited than the station's receiver. Please note that when HD is switched
analogue coverage area. Please be aware • Volume increase or decrease
off, it will not be possible to tune to sub-chan-
that as with any radio broadcast technol- • Equalizer settings, i.e. Bass/ Midrange/ nels (see the following section for a more
ogy, terrain, time of day, foliage level and Treble cut or boost detailed explanation of sub-channels).
building location can have positive or neg- • Time alignment (Digital program mate-
ative effects on radio reception. Repeat steps 2 and 3 above to reactivate HD
rial in extreme cases can be as much as
(an X will appear in the box on the display
• Analogue to digital/digital to analogue 8 seconds behind the analogue). This
screen).
blending: Analogue to digital blending will will noticeable as a "stuttering" effect.
occur as the signal strength reaches a pre- The above items are dependant on the Sub-channels
set threshold in the receiver. This will be broadcaster's equipment settings and do
noticeable in fringe areas (areas with weak not indicate a fault in the vehicle's radio
reception) and is normal. receiver or antenna systems.
Switching HD on or off
The factory setting for HD radio is on. However,
when driving through areas with weak HD sig-
nals (fringe areas), you may experience that the
radio repeatedly switches between analogue/
digital and digital/analogue reception. If this
happens, it may be desirable to switch HD off.
To do so:
1. Be sure the audio system is switched on
and in AM or FM mode.
2. Press MENU in the center console control Example of an HD Radio station with sub-channels
panel.
244
10 Audio
Radio functions
In many cases, a main HD Radio station (FM NOTE Listening to satellite radio
wavebands only) will also have sub-channels The Sirius satellite system consists of a number
offering additional types of programming or • When the radio has gone into HD mode,
of high elevation satellites in geosynchronous
10
music. it may take several seconds before the
">" symbol (if the current frequency has
orbit.
In such cases, the “>” symbol will be displayed any sub-channels) is displayed to the
to the left of the frequency number and a num- right of the frequency. Pressing the NOTE
ber will be displayed to the right of the fre- arrow keys before the number is dis-
quency number indicating that the currently
• The digital signals from the Sirius satel-
played will cause the radio to tune to the lites are line-of-sight, which means that
tuned frequency has at least one sub-channel. next available radio station, not to the physical obstructions such as bridges,
The "2" in the illustration indicates that you are current station's sub-channels. tunnels, etc, may temporarily interfere
currently listening to the first sub-channel on • When you are no longer in broadcasting with signal reception.
frequency 93.9. range of the currently tuned sub-chan-
• Avoid any obstructions, such as metal-
Selecting sub-channels nel, No HD reception will be dis- lic objects transported on roof racks or
To listen to a station's sub-channel(s), press played. The radio will then be muted in a ski box, or other antennas that may
and it will be necessary to tune to or impede signals from the SIRIUS satel-
the right arrow key on the center console or on
search for a new radio station. lites.
the steering wheel keypad. To go back to the
main channel, press the left arrow key. To go
to subchannel 2 (if available), press the right Sub-channels can also be stored as presets, Selecting Sirius radio mode
arrow key. see page 241 for information on storing sta- 1. Press Power to switch on the audio system
tions. (see page 241 for information on the stand-
If you are currently tuned to a frequency's main
channel, pressing the left arrow key will tune to If you press a sub-channel's preset button, it ard radio functions).
the next lower radio frequency. may take up to 6 seconds before the channel 2. Press the MODE button repeatedly until
becomes audible. If you press this button while Sirius 1 or 2 is displayed.
you are out of digital range of the transmitter,
No HD reception will be displayed. Activating Sirius radio
1. Tune to a satellite channel that has no
audio, which means that the channel is
unsubscribed and the text "Call 888-539-
SIRIUS TO SUBSCRIBE" is displayed
``
245
10 Audio
Radio functions
(see also "Selecting a channel" in the right 5. Use the left or right arrow keys to select a 1. Press MENU and scroll to "Direct channel
column). channel in the currently chosen category. entry."
10
2. Call Sirius at 1-888-539-SIRIUS (7474). 6. Press ENTER to listen to a channel. 2. Use the numerical keypad to enter the
channel's number.
3. When asked for the Sirius ID number press
AUTO to display this number. It is also NOTE 3. Press ENTER. The radio will tune to this
possible to retrieve the Sirius ID from the • The category "All" is default, which ena- channel, even if it belongs to a category
MENU. bles you to scroll through the entire list other than the currently selected one.
4. "UPDATING SUBSCRIPTION" will be of available satellite channels.
displayed while the subscription is being • The channel categories are automati- NOTE
updated, after which the display will return cally updated several times a year. This • The numbers of skipped or locked
to the normal view. takes approximately two minutes and channels will not be displayed.
will interrupt normal broadcasting. A
SIRIUS ID message will be displayed while updat- • If a channel is locked, the access code
ing is in progress. Information on chan- must be entered before the channel can
The SIRIUS ID is required when contacting the
nel or feature updates is available at be selected. See "Unlocking a channel"
Sirius Call Center. It is used to activate your on page 247.
account and when making any account trans- www.sirius.com.
actions. The SIRIUS ID is sometimes referred
to as the Electronic Serial Number (ESN). Selecting a channel Scanning
There are three ways of tuning in a channel:
Selecting a channel category NOTE
1. Select Sirius radio mode as described • Using the left and right arrow keys
above. SCAN automatically searches through the
• By turning the tuning control list of satellite channels, see page 242 for
2. Press ENTER. • Through direct channel entry more detailed information.
3. Use the up/down arrow keys to scroll Direct channel entry
through the list of categories. The Sirius satellite channels are numbered Storing a channel
4. Press ENTER or the right arrow key to consecutively throughout all of the categories. • A long press on one of the number keys
To access a channel directly: stores the currently tuned channel on that
select a category.
key.
• A short press on a number key while the
radio is in Sirius 1 or 2 mode will tune to the
246
10 Audio
Radio functions
preset satellite channel stored on that but- Song seek Advanced settings
ton, regardless of the currently selected When a satellite radio channel plays one of the This menu function enables you to make set-
channel category. songs stored in the song memory, the listener 10
tings on certain Sirius satellite radio functions.
will be alerted by a text message and an audi- To access this menu:
Song Seek and Song Memory ble signal.
1. Press MENU.
The Song Seek and Song Memory functions Press ENTER to listen to the song or
provide both audio and visual notification when EXIT to cancel. 2. Scroll to Sirius menu.
Sirius is broadcasting your favorite songs. 3. Select Advanced Sirius settings.
To activate/deactivate the song seek function:
Song Seek enables you to store the name of
the song for future advance notification when 1. Press MENU WARNING
that song is being played. The Song Memory 2. Scroll to "Song seek"
feature makes it possible to view all of the cur- Settings should be made when the vehicle
rent songs that are stored in memory. 3. Press ENTER to activate or deactivate the is at a standstill.
function.
Song memory The following settings can be made in the Sir-
Up to ten songs can be saved in the system's NOTE ius menu.
memory.
When the song has ended, the radio will • Songs can be added to the song list
1. Press MENU. remain tuned to the channel on which the • Channel skip settings can be made
song was played.
2. Scroll to "Add song to song mem." and • Channel lock settings can be made
follow the instructions shown in the dis-
play. Radio text • The channel access code can be displayed
or changed
The text that is displayed about the song that
If a new song is selected when the memory is • Your Sirius ID can be displayed
is currently playing can be changed. Use the
full, you will be prompted to press ENTER to
AUTO button or the menu to display the Artist,
delete the last song on the list. Skip options
Title, Composer, or switch radio text off. This function is used to remove a channel from
NOTE the list of available channels.
The remaining songs in the list will move Skip current
down one position, and the newly added 1. Select CHANNEL SKIP LIST and press
song will be placed at the top of the list.
ENTER.
``
247
10 Audio
Radio functions
2. Select a category in the list and press 3. Enter the channel access code and press 1. Select CHANGE CODE and press
ENTER. ENTER. ENTER.
10
3. Skip channels in the list presented by 4. Select a category in the list and press 2. Enter the current code and press ENTER.
pressing ENTER or right arrow key. ENTER.
3. Enter the code and press ENTER.
Unskip all channels 5. Lock channels in the list presented by
4. Confirm the new code and press ENTER.
This permanently removes all channels from pressing ENTER or right arrow.
the skip list and makes them available for If an incorrect code is entered, the text
The channel is now locked and a checked box
selection. WRONG CODE! is displayed.
will be displayed to indicate this. It will be nec-
essary to enter the channel access code1 in If you have forgotten the access code:
Temp. unskip all ch. order to listen to a locked channel.
This function will temporarily unskip all chan- 1. Select "SIRIUS ID" in the Sirius settings
nels and make them available for selection. The Unlocking a channel: menu and press ENTER.
channels remain on the skip list and will again A channel's access code1 is required to unlock
2. Press and hold the ENTER button for
be skipped the next time the ignition is a channel.
2 seconds.
switched on. Unlock all channels
3. The current code will be displayed.
This permanently removes all channels from
Channel lock the locked list and makes them available for Your Volvo retailer can also provide you with
Access to specific channels can be restricted selection. assistance.
(locked). A locked channel will not provide
audio, song titles, or artist information. Temp. unlock all ch. SIRIUS ID
This function will temporarily unlock all chan- This function displays the 12-digit Sirius acti-
nels and make them available for selection. The
NOTE vation ID.
channels remain on the locked list and will
All channels are initially unlocked. again be locked the next time the ignition is
switched on.
Locking a channel
CHANGE CODE
1. Select "Sirius ID" in the menu and select
This function makes it possible to change the
LOCK OPTIONS and press ENTER.
channel access code. The default code
2. Select CHANNEL LOCK LIST and press is 0000.
ENTER To change the code:
248
10 Audio
CD player/CD changer
``
CD player/CD changer
250
10 Audio
CD player/CD changer
3. Select Disc or Folder and press ENTER. 1. Press MENU. Select the menu for relevant NOTE
sound source and press ENTER.
Activating/deactivating the random • The Eject all function can only be used 10
function-CD changer 2. Select Disc text in the menu and press while the vehicle is at a standstill and will
ENTER. be cancelled if the vehicle begins to
If a normal CD is being played: move.
> If information is stored on the disc, it will
1. Press MENU followed by ENTER.
now appear in the display. • For reasons of traffic safety, the ejected
2. Select Random and press ENTER. CD must be removed within 12 seconds
To deactivate this function, select Disc text in
3. Select Single disc or All discs and press the menu and press ENTER. or it will be automatically drawn back
into the slot and the CD player will enter
ENTER.
Scan pause mode. Press the CD button to
If a CD with audio files is being played: This function plays the first 10 seconds of each restart the disc.
1. Press MENU followed by ENTER. track/file on the CD.
2. Select Random and press ENTER. Press SCAN. Compact disc care
3. Select Single disc or Folder and press Press EXIT or SCAN to stop the scan func- Keep the following in mind when playing/han-
ENTER. tion and listen to an entire track/file. dling compact discs
``
251
10 Audio
CD player/CD changer
252
10 Audio
Audio menu
FM1/FM2 menu
1. RADIOTEXT ON/OFF
10
2. ADVANCED RADIO SETTINGS
3. AUDIO SETTINGS
AM menu
1. AUDIO SETTINGS
CD menu
1. RANDOM
2. AUDIO SETTINGS
CD changer menu
1. RANDOM
2. DISC TEXT ON/OFF
3. AUDIO SETTINGS
AUX menu
1. AUX VOLUME
2. SOUND SETTINGS
253
10 Audio
Introduction and other controls on the cell phone can The symbol indicates that the hands-free
always be used regardless of whether or not system is active.
10 the phone is connected to the hands-free sys-
tem. A long press on the PHONE button deactivates
the hands-free system and disconnects the
cell phone.
NOTE
Not all cell phones are fully compatible with Connecting cell phones
the hands-free system. A list of compatible The procedure for connecting a cell phone var-
phones is available at your Volvo retailer or ies, depending on the phone itself, and on
at www.volvocars.us whether or not the phone has been previously
connected.
WARNING If this is the first time the phone is to be con-
nected to the hands-free system, proceed as
G029503
254
10 Audio
> The audio system will search for cell The cell phone will be registered and will be the driver’s door is opened on vehicles equip-
phones that are in range. This search connected automatically to the audio system ped with the optional keyless drive).
takes approximately 30 seconds. Any while the text Synchronising is displayed. For 10
When the cell phone is disconnected from the
phones detected will be displayed with more information on synchronizing a cell hands-free system, a call in progress can be
their Bluetooth® names. The hands-free phone, see page 257. continued using the cell phone’s own speaker
system’s Bluetooth® name will appear When a connection has been established, the and microphone.
in the cell phone’s display as My Car.
symbol and the cell phone’s Bluetooth®
4. Select one of the cell phones shown in the name will be displayed. The cell phone can NOTE
audio system’s (center console) display. now be controlled from the audio system. Certain cell phones may require confirma-
5. Using the cell phone’s keypad, enter the tion from the phone’s keypad when a call is
Making a call transferred from hands-free to the cell
digits shown in the audio system’s display. 1. Ensure that TELEPHONE is shown at the phone.
Alternative 2–using the cell phone’s menus top of the center console display and that
1. Activate the hands-free system by briefly the symbol is visible (by pressing briefly
pressing the PHONE button in the center on PHONE on the center console). Handling calls
console. If there is a cell phone connected, 2. Dial the desired phone number or use the Incoming calls
disconnect it from the hands-free system phone book (see page 257). Press ENTER to answer a call, even if the
(by pressing PHONE in the center console audio system is currently in e.g., CD or FM
for several seconds). 3. Press ENTER.
mode.
2. Perform a search using the cell phone’s End the call by pressing EXIT.
Press EXIT to defer a call.
Bluetooth® function (consult the cell Disconnecting the cell phone
phone’s owner’s manual if necessary). The cell phone is automatically disconnected Automatic answer
3. Select My Car in the list of devices shown from the audio system if it is moved out of This function means that incoming calls will be
in the cell phone’s display. range. For more information about connec- answered automatically. Activate or deactivate
tions, see page 254. the function in the menu system under Phone
4. When prompted, enter the PIN code 1234 settings Call options Automatic
in the cell phone. The cell phone can be manually disconnected
answer.
from the hands-free system by pressing
5. Connect to My Car from the cell phone.
PHONE. The hands-free system is also deac-
tivated when the ignition is switched off (or if
``
255
10 Audio
Call settings Sound settings Sounds and volume Ring signal Ring
While a call is in progress, press MENU or signal 1,2,3....
10 ENTER on the center console to access the Call volume
following functions: Call volume can be adjusted when the hands-
free system is activated. Use the buttons in the
NOTE
• Microphone off–mute the audio system’s steering wheel keypad or the audio system’s The connected cell phone’s ring tone is not
microphone. volume control. switched off when one of the hands-free
• Transfer call to mobile–transfer the call system's ringing tones is used.
from hands-free to the cell phone. Audio system volume
While a phone call is in progress, volume for If you prefer to use the connected cell phone’s
• Phone book–this feature enables you to the audio system can be adjusted in the normal
search for a stored telephone number. ring tone1, go to Phone settings Sounds
way with the audio system's volume control. In
order to adjust volume during a phone call, the and volume Ring signal Use mobile
NOTE audio system must be switched to one of the phone signal
• On certain cell phones, the connection other modes (FM, CD, etc).
is broken when the mute function is More information about registering
Audio system sound can be automatically
used, which is normal. If this happens, and connecting cell phones
muted when a phone call is received in Phone
the hands-free system will prompt you
settings Sounds and volume Mute A maximum of 5 cell phones can be registered
to reconnect.
radio and adjust the volume with the / in the hands-free system. Registration only
• A new call cannot be initiated while needs to be done once for each phone. After
another call is in progress. keys on the center console.
registration, the cell phone no longer needs to
Ringing volume be in sight or searchable. Only one cell phone
Go to Phone settings Sounds and volume can be connected to hands-free at a time.
Phones can be unregistered in Bluetooth
Ring volume and adjust the volume with
Remove telephone
the / keys on the center console.
Automatic connection
Ringing tones When the hands-free system is active and the
The hands-free system’s integrated ringing most recently connected cell phone is within
tones can be selected in Phone settings range, it is detected automatically. When the
256
10 Audio
audio system searches for the most recently made in the phone book of the currently con- Voice control
connected phone, this phone’s name appears nected cell phone. If the cell phone that is currently connected
in the display. To manually connect a different allows calls to be made via voice commands, 10
cell phone, press EXIT. NOTE this function can be used by pressing and hold-
ing ENTER.
Manual connection If a particular cell phone does not support
To connect a phone other than the one that copying of the phone book, List is empty Voice mail number
was most recently connected or to switch will be displayed when copying has been
completed.
The phone number to your voice mail can be
between cell phones that are already regis- changed in the menu Phone settings Call
tered in the hands-free system: options Voice mail number. If no number
If the phone book contains information about
1. Put the audio system in telephone mode. someone who is trying to call you, this infor- has been stored, this menu can be accessed
2. Press PHONE in the center console and mation will be shown in the display. by a prolonged press on button 1. Once a
select one of the phones on the list. phone number has been stored, press and
Searching for contacts hold 1 to dial this number.
A connection can also be established in the
The easiest way to search for a contact in the
menu system under Bluetooth Connect Call lists
phone book is to press and hold any of the
phone or Change phone. Lists of calls in a particular cell phone are cop-
buttons 2–9 (see the illustration on page 254).
This starts a search based on the first letter on ied to the hands-free system each time that
Phone book the button that has been pressed. phone is connected. These lists are then upda-
ted while the phone is connected. Press
In order to use the hands-free system’s phone The phone book can also be accessed by ENTER to show the most recently dialed num-
book (list of contacts), TELEPHONE must be pressing the navigation buttons / on the bers. Other call lists can be found under Call
displayed at the top of the center console dis-
center console or by pressing / on the register.
play and the symbol must be visible.
steering wheel keypad. A search can also be
The audio system stores a copy of the phone made in the phone book’s search menu in NOTE
book of each registered cell phone. The phone Phone book Search: Certain cell phones display the list of the
book is automatically copied each time a most recently dialed numbers in reverse
phone is connected. This function can be acti- 1. Enter the first letter of the contact’s name
and press ENTER or simply press ENTER. order.
vated in Phone settings Synchronise
phone book. Searches for contacts are only 2. Select the desired contact and press
ENTER to make a call to that person.
``
257
10 Audio
ABC2ÄÅÀÆÇ
Bluetooth® menus
1. Missed calls
DEF3ÈÉ 2. Received calls
3 Dialed calls
GHI4Ì 4. Phone book
4.1. Search
JKL5
4.2. Copy fr. mobile phone
MNO6ÑÖÒØ 5. Bluetooth...
5.1. Change phone
PQRS7ß
5.2. Connect phone
5.3. Disconnect phone
258
10 Audio
10
259
Label information.................................................................................. 262
Dimensions and weights....................................................................... 264
Fuel, oils, and fluids.............................................................................. 267
Engine oil............................................................................................... 269
Engine specifications............................................................................ 270
Electrical system................................................................................... 272
Three-way catalytic converter............................................................... 274
G000000
Volvo programs..................................................................................... 275
260
SPECIFICATIONS
11
11 Specifications
Label information
11
262
11 Specifications
Label information
1 The Vehicle Identification Number (VIN) should always be quoted in correspondence concerning your vehicle with the retailer and when ordering parts.
263
11 Specifications
Dimensions
11
Position Dimension
A Wheelbase 103.9 in. (264 cm)
264
11 Specifications
Position Dimension
H Track, rear 60.8 in. (154 cm)
Weights
Category USA Canada
Gross vehicle weight Non-turbo: - 1840 kg
Turbo manual: 4320 lbs 1960 kg
Turbo automatic: 4340 lbs 1970 kg
``
265
11 Specifications
CAUTION
The maximum permissible axle loads and/
or the gross vehicle weight must not be
exceeded.
11 WARNING
When adding accessories, equipment, lug-
gage and other cargo to your vehicle, the
total capacity weight must not be exceeded.
266
11 Specifications
Engine oil (with filter replacement) See page 269 for information on engine oil 6.1 US quarts (5.8 liters)
specifications.
Manual transmission oil BOT 350 M3 5-speed: 2.2 US quarts (2.1 liters)
6-speed: 2.0 US quarts (1.9 liters) – turbo models
Coolant Volvo original coolant/antifreeze (50/50 mix- 10.5 US quarts (10 liters) – models with automatic
ture of water and anti-freeze) transmission
10 US quarts (9.5 liters) – models with manual trans-
mission
Brake fluid DOT 4+ boiling point >536 °F (280 °C), P/N 0.63 US quarts (0.6 liters)
9437433
Power steering fluid WSS M2C204-A or equivalent 1.3 US quarts (1.2 liters) – system and reservoir com-
bined
Washer fluid reservoir Use washer fluid solvent in cold weather con- 6.8 US quarts (6.5 liters)
ditions.
``
267
11 Specifications
NOTE
The transmission oil does not normally need
to be changed during the service life of the
vehicle. However, it may be necessary to
replace the oil if the vehicle is often driven
in areas of sustained temperature extremes
11 (hot or cold), when towing a trailer over long
distances, for prolonged driving in moun-
tainous areas, or if the vehicle is often driven
short distances in temperatures under 40 °F
(5 °C).
268
11 Specifications
Engine oil
Oil specifications good fuel economy and engine protection. See American Petroleum Institute (API)
Engine oil must meet the minimum ILSAC the viscosity chart. symbol
specification GF-4, API SL, or ACEA A1/B1.
Lower quality oils may not offer the same fuel
economy, engine performance, or engine pro-
tection.
11
Volume: 6.1 US qts (5.8 liters).
Volume between the MIN and Max marks on
the dipstick: approximately 1.4 US qts (1.3 lit-
ers).
Volvo recommends Castrol.
G022917
G023491
Depending on your driving habits, premium or
synthetic oils may provide superior fuel econ-
Viscosity chart The API Service Symbol "donut" is divided into
omy and engine protection. Consult your Volvo
retailer or a trained and qualified Volvo service Extreme engine operation three parts:
technician for recommendations on premium Synthetic oils meeting SAE 0W-30 or 0W-40 • The upper section describes the oil's per-
or synthetic oils. and complying with oil quality requirements are formance level.
recommended for driving in areas of sustained
Oil additives must not be used.
temperature extremes (hot or cold), when tow-
• The center identifies the oil's viscosity.
ing a trailer over long distances, and for pro- • The lower section indicates whether the oil
NOTE longed driving in mountainous areas. has demonstrated energy-conserving
Synthetic oil is not used when the oil is properties in a standard test in comparison
changed at the normal service intervals. to a reference oil.
This oil is only used at customer request, at
additional charge. Please consult a trained
and qualified Volvo service technician.
Oil viscosity
Incorrect viscosity oil can shorten engine life
under normal use. SAE 5W-30 will provide
269
11 Specifications
Engine specifications
No. of cylinders 5 5
Spark plugs
type Volvo kit no. 30650843 Volvo kit no. 30650379
gap inches/mm (3x) 0.024 ± 0.004 in./0.6 ± 0.1mm 0.027in./0.7mm
tightening torque ft. lbs./Nm 22.5 ft. lbs./30 Nm 22.5 ft. lbs./30 Nm
A Certain markets.
B The engine specifications for output and torque listed in this table are based on the use of premium fuel.
Charge air cooler (Intercooler) pressed inlet air. The resulting increase in air cooler (which resembles a radiator) is located
Turbocharged engines employ a turbo-com- flow raises pressure in the intake manifold and between the turbo-compressor and inlet mani-
pressor to force air into the engine inlet mani- increases engine power over that developed by fold.
fold and a charge air cooler to cool the com- the normally-aspirated engine. The charge air
270
11 Specifications
Engine specifications
Fuel system
The engine is equipped with a multiport fuel
injection system.
11
271
11 Specifications
Electrical system
Capacity (Ah) 70 80
A Models equipped with the High Performance audio system.
B Models equipped with the Premium Sound audio system,
the Volvo Navigation System and/or keyless drive.
Extra high beam (models with Dual Xenon headlights only) 55W H7
272
11 Specifications
Electrical system
Turn signal, front/rear (applies to models with halogen headlights) 24W P21/5W
11
Rear parking light, side marker light 5W P21/W5
NOTE
For information regarding any other bulbs
not mentioned in this section, please con-
tact your Volvo retailer or a trained and
authorized Volvo service technician.
274
11 Specifications
Volvo programs
Technician certification
In addition to Volvo factory training, Volvo sup-
ports certification by the National Institute for
Automotive Service Excellence (A.S.E.). Certi-
fied technicians have demonstrated a high
degree of competence in specific areas.
Besides passing exams, each technician must
also have worked in the field for two or more
years before a certificate is issued. These pro-
fessional technicians are best able to analyze
vehicle problems and perform the necessary
maintenance procedures to keep your Volvo at
peak operating condition.
275
12 Index
276
12 Index
277
12 Index
278
12 Index
279
12 Index
280
12 Index
281
12 Index
282
Kdakd8Vg8dgedgVi^dcIE&%.&*JH68VcVYV!6I%.'%!Eg^ciZY^cHlZYZc!<iZWdg\'%%.!8deng^\]i'%%%"'%%.Kdakd8Vg8dgedgVi^dc