Nothing Special   »   [go: up one dir, main page]

Alyaf - A401 XL - MDS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ALYAF A401 XL FUNCTIONS

Product Data Sheet - A1 Range


ALYAF A401 XL is a nonwoven geotextile made from staple fibers, mechanically bonded by
a needle punching process to produce a dimensionally stable network. The fibers used are
100% white polyester, ultra-violet resistant with 256°C melting point. ALYAF geotextiles are
manufactured, inspected and tested according to our Integrated Management System
procedures that have been assessed and certified in accordance with ISO 9001:2015,
ISO 14001:2015 & ISO 45001:2018.
APPLICATION AREAS:

P rop e rt i e s Te st M ethod Unit V alu e


Tensile Strength CD EN ISO 10319 kN/m 17
Tensile Strength MD EN ISO 10319 kN/m 17
Elongation at break CD / MD EN ISO 10319 % 60 / 50
CBR Puncture EN ISO 12236 N 3000
Dynamic Puncture EN ISO 13433 mm 14
Permeability EN ISO 11058 10-3ms-1 55
Flow rate normal to the plane EN ISO 11058 l/m2/sec 55
Opening Size (O90) EN ISO 12956 microns 75
Thickness under 2kPa EN ISO 9863-1 mm 2.7
Mass Per Unit Area EN ISO 9864 g/m2 300
Roll Width nominal meters 6
Roll Length nominal meters 100
Note :
1. ALYAF geotextiles are non-biodegradable, have excellent resistance to chemicals and salts present in the soil and are unaffected by prolonged
contact with hydrocarbons such as gasoline and diesel. Predicted to be durable for a minimum of 25 years in natural soil with 4 < pH < 9 and soil
temperatures < 25° C.
2. These have excellent UV resistance and exhibit strength retention of 70% on test for weathering resistance to EN 12224.
3. As an organization committed to the safe environmental practices we suggest our customers to dispose the used material and the wastes during
installation through a certified agency as the material is recyclable.
4. Engineered grades to meet specific project requirements are available upon request.
5. Values reported in this data sheet are the average results obtained in our laboratory and Independent testing institutions effective September’2022
and are subject to manufacturing tolerances. Properties optimization and practical experience can make revisions necessary and the right is
reserved to make changes without prior notice.
6. This is not intended as warranty or guarantee and Alyaf Industrial Co. Ltd. assumes no liability in connection with the use of this information as
the conditions of usage are beyond our control.

Rev. 07 September’2022 Geospec- XL_EN

You might also like