รวม Catalogue Mavi Deniz
รวม Catalogue Mavi Deniz
รวม Catalogue Mavi Deniz
DIMENSION I ÖLÇÜ
LENGTH I UZUNLUK 4.80 M
BREADTH I GENİŞLİK 2.30 M
DEPTH I DERİNLİK 2.10 M
DRAUGHT I DRAFT 0.40 M
NET TONNAGE I NET TONİLO 2.1 TON
GROSS TONNAGE I GROS TONİLO 2.2 TON
PERFORMANCE I PERFORMANS
SPEED (TRIAL) I HIZ (DENEME) 4 - 3 KNOTS
© Mavideniz reserves the right to modify data and design without notice. All rights reserved, www.basarangemi.com www.mavideniz.com.tr
Collection Rakes
Reed Rake Model 3500 is used for the collection and transport
of plants after reed cutting. It has foldable sections. The rake can be
supplemented with strainer plates for collection of waste, weed, algae
and absorbents pads, booms, granules regarding oil spill clean-up.
Strainer plates are optional for Reed Rake standard.
Reed Rake - Working width : 3.5 m / Weight : 60 kg
Strainer Plates Reed Rake - Working width : 3.5 m / Weight : 15 kg
Reed Rake
Collection and transport of
plants, wastes, algae, absorbents.
Working width: 3.5 m
Weight: 60 kg
Spring Rake
Collection of plants, wastes, algae,
absorbents. etc. at shoreline.
Working width: 2.5 m
Weight: 40 kg
Lifting Rake Model2000 is the perfect tool to choose when cleaning the shore and lifting heavier
objects. The strong forks can lift tires, stones, trees and plants with roots found along the shoreline and bottom
of the lake. The forks can be adjusted to reduce the working width.
Lifting Rake - Working width : 2 m / Weight : 45 kg
Lifting Rake
Collection and transport of
heavier objects, tires, stones, trees.
Working width: 2.0 m
Weight: 45 kg
High tip Rake Model2150 is the perfect tool that has a higher tip height which make loading of trailers
or barges easier. The rake is made of perforated steel plating which allows it to collect smaller particles such as
waste, algae and absorbents (oil decontamination).
High tip Rake - Working width : 2.15 m / Weight : 75 kg
16 mt
CP 45 is a professional dredge & trash pump designed for pumping slurries, trash waters and thick liquids with density concentration
in the fluid up to 25% and suspended solids with dimensions up 70 mm.
Can be powered by power packs or by the hydraulic circuits of excavators, back hoe loaders, trucks, tractors, and all machines
equipped with a sufficient circuit..
THE PUMP BODY IS FABRICATED IN STAINLESS STEEL WITH URETHANE WEAR PLATES, materials that assure hardness,
resistance to abrasivity,impacts and rust.
The hydraulic functioning assure intrinsic safety and impossibility to cause electric shock. Performances are very high: flow up to
3000 L/min and water head up to 16 m. CP 45 is ideal in large movements of water, in the emergencies after floods, for sewage
treatment facilities,manhole dewatering.
ADVANTAGES
Unbeatable power/size/weight ratio
Possibility to run dry without damages
Robust construction and minimal maintenance needs
Durability, versatility thanks to the possibility to be powered by small power packs, mini excavators, jeeps and trucks,
fire fighting and rescue vehicles
Implicit safety thanks to the absence of electricity,
Zero problems of priming
The pumping chamber can be open in few seconds for inspection and cleaning
CP 45
TECHNICAL CHARACTERISTICS
When dredging harder sediments, screw feeding can give a Model SFU
more stable flow to the pump inlet. For sediment containing Screw feed
solid objects, e.g stones, bits of wood, etc. screw feeding is (Optional)
recommended.
Technical data:
The Dredge Pump Model D
Capacity max. 180 m3/hr depending on the material, lifting height and length of hose.
Free flow capacity approx. 3000 l/min Model T
Telescopic extension
(Optional)
Weight with hydraulic feeder Approx. 60 kg
Weight with screw feed Approx. 110 kg
Dredge depth with telescope 1.7 m and with extension 2.4 m.
Dredge depth with mechanical bracket 0.9 m and with extension 1.6 m.
Excavator
Accessories:
The excavator can be delivered with wide range of buckets and supporting legs (studs).
Outrigger pontoons: 2 x 65 kg (for excavation and with assembly parts.)
Bucket 30 litres: work width 0.6 m
Bucket 60 litres: work width 0.6 m
Root knife: work depth 0.6 m
Excavation rake 70 litres: work width 0.9 m
Saw head: work width 0.6 m
Cutter knife: work width 1.9 m
Fail mulcher: working width 0.8 m
Flail Mulcher
Flail Mulcher Model 8000 is a flail mulcher specially designed Flail Mulcher
for AMPHIBEX machine mounted flails and fixed tooth Mulchers. Suitable
for drainage working, land clearance and light duty mulching. Cutting grass, brush, broom, tree
Flail mowers or Mulchers are capable of clearing tall grasses, weeds, up to max. 25 mm thickness.
heavy brush, brooms and trees up to 25 mm in diameter from areas Operation: Hydraulic
such as hillsides, roadways, ditches, utility right of ways, riverbanks and
lake sides. Flail Mulcher is a perfect tool that chops vegetation without Working width: 0.8 m
the need to collect it afterwards. Y-knife Cut: 15 mm
Its working width is min. 0.8 m. It has protective cover for motor. Hammer-knife Cut: 25 mm
Delivered with a hammer knife or Y-knife. Model 1 Y-knife is recommend Weight: Approx.
for cutting plants and brushwood up to 15 mm in diameter. Model 2
Hammer knife is recommend for cutting plants and brushwood up to a 90 kg
max. of 25 mm in diameter. Capacity is thickness of up to 25 mm. CE Certificate: Yes
Flail Mulcher has EC Certificate of Conformity certification. Model No: 8000
Model 1 Model 2
Cutting Tools
Mavi Cutter Model M20/M30 is the perfect solution for common reed cutting in most aquatic
environments. The cutter is hydraulically operated and easy to attach to Amphibex’s tool bracket. The cutter
has two work depths ; 1 m or 1.4 m.
The Mavi T-Cutter M20 cutting depth is 1 m. The Mavi T-Cutter M30 is the same model but its cutting depth has
been increased to 1.4 m. The knives are replaceable with a working width from 2.2 to up to 4 metres.
The Mavi cutter M20 and M30 must be used in water, which lubricates the knives during work and is therefore
not suitable for use on land. A stone release system protects the knives if they come into contact with solid
objects.
Mavi Cutter M20
Reed and submerged aquatic
vegetation cutting.
Working width: 4.0 m
Weight: 65 kg
Cutting depth: 1.0 m
Accessories:
Knife set
3 pcs
Width: 2.0 m
Width: 3.0 m
Width: 4.0 m
Mavi T-Cutter Model E20 is a front-mounted T-cutter with Busati knives and a higher cutting capacity.
The Mavi T-Cutter Model E20 is recommended when the water depth is less than 50 cm. A stone release system
protects the knives from stopping when coming into contact with solid objects.
Mavi Cutter Bucket Model E2200 is the perfect tool to cuts and collects plants at the same time. It
is especially useful in smaller waterways such as golf ponds and harbours where space is scarce and the water
flow can make collection difficult. The collection net on the cutting bucket can be removed when only the
cutting function is to be used. Mavi Cutter Bucket Model E2200 is also recommended for use in marshlands.