MRV Brochure

S
The Haier Difference

High Efficiency
An Enhanced Vapor Injection (EVI) compressor, speedless
inverter DC motor, and a sturdy one-piece four-sided heat
exchanger provide exceptional efficiency, ensuring peak
performance built to withstand the test of time.

Superior Comfort
Delivering precise temperature control within 1⁰F
of its set point, enjoy comfortable heating in frigid
conditions as low as -22⁰F and cooling up to 122⁰F.

Advanced Technology
Say goodbye to the hassle of intricate wiring and
experience a streamlined and efficient solution.
Our industry-leading MRV-Link communication
network was engineered to replace the labor
intensive conventional wired daisy chain network,
eliminating the need for communication wires
between indoor units.
Flexible Installation
Auto-addressing indoor units save time on the initial
startup while the 0.4 in. w.g. external static pressure
design offers unparalleled flexibility, allowing for the
installation of outdoor units in the desired location,
even indoors in some applications.
A versatile piping connection design and flexible
piping limits allow the installer to route pipe
according to the job site needs.

3,280’ Max total piping length

726’ Maximum longest run for Heat Pump systems
541’ Maximum longest run for Heat Recovery systems
295’ Maximum run after 1st branch
98’ From branch to indoor unit
295’ Vertical separation - when ODU is below
360’ Vertical separation - when ODU is above
98’ Vertical separation –between indoor units

Easy to Service
All MRV-5 outdoor units feature a swing-out
electronic control box design that conserves
interior volume within the unit, allowing
maintenance personnel to easily access system
parts and components without disassembling or
removing the control box.
NEW IN 2024!

High Efficiency
A highly efficient full DC Inverter EVI compressor and
fan motor along with a 21” serrated-edge fan blade
allows for higher air movement with a nighttime quiet
operation.

Easy to Install
Dual heat pump/heat recovery single chassis models
up to 20 tons designed with built in handles and skid
for easy handling and rigging. Easy integration with
BMS and extended piping limits for flexible design.

Optimized Comfort
Premium heating performance for low ambient
applications with an extended operating range from
-22⁰F to 122⁰F with a full line of indoor units and
controls available for both residential and commercial
applications.

Energy Saving
Tested to the latest DOE and AHRI standards and
regulations, the optimized design features intelligent
controls to prevent scroll gas leakage, reducing the
scroll clearance volume.

Tonnage 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36

Dual Heat Pump/

Heat Recovery
 Outdoor Units

Inverter DC-motor fans with Four-sided heat exchanger

17% improved efficiency. features 30% improved heat
transfer efficiency.
High static operation supports
up to 0.4” of ESP when indoor Standard black fin coating rated
installation is required . for 1000-hour salt spray (ASTM
B117) for corrosion resistance.

Service friendly features include

hinged doors and a swing-out
ebox designed to allow service High efficiency, all-inverter
personnel to quickly access compressors designed for
components. maximum reliability.
Oil temperature sensors and
discharge temperature sensors
Operating range from provide dynamic feedback
-13⁰F to 122⁰F. control of the refrigerant
system.

Tonnage 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36

Heat Pump

Heat Recovery

S
Two stage subcooling process Improved PCB design
improves heat exchange reduces standby energy
efficiency and allows for long consumption by 20%.
refrigerant line lengths.

High efficiency, DC inverter twin

High efficiency DC fan motor rotary compressor designed for
and aerodynamic fan design maximum reliability and small
results in 38% reduction of fan footprint.
power input previous
generation.

Tonnage 3 4 5

Heat Pump
 Tonnage
Series Model 5 7 9 12 15 18 24 30 36 42 48 54 60 72 96

Highwall MVAW_MV2AA ü ü ü ü ü ü

One-Way
MVAO_ME2AA ü ü ü ü
Cassette

Compact
MVAB_MV2AA ü ü ü ü ü
Cassette

Large Cassette MVAL_ME2AA ü ü ü ü ü ü ü ü ü ü

Slim Duct MVAD_MV2AA ü ü ü ü ü

Medium Static
MVAM_ME2AA ü ü ü ü ü ü ü ü ü
Ducted

High Static
MVAH_ME2AA ü ü
Ducted

Air Handling
MVAX_ME2AA ü ü ü ü ü ü ü ü ü ü
Unit

Tonnage Max IDU

Series Model 2 4 8 16 20 Series Model Quantity
VP1-112B 5
AH1-070B ü Heat
Recovery
VP1-180B 8
AH1-140B ü Box
DX AHU (Single)
VP1-280B 8
Connection AH1-280B ü
Kits Heat
AH1-560B ü Recovery 5 per port
VP4-450B
Box (20 total)
AH1-730B ü (Multi)
 Indoor Units
Highwall

Compactly designed, with small Sleek, modern panel design is

chassis models up to 1-ton less easy to clean, and features an
than 8 inches deep. operational display and auditory
feedback.

Independently controlled
Designed for low noise horizontal and vertical
operation, with sound levels discharge louvers provide a high
as low as 29 dB(A). degree of air distribution
control for maximum occupant
6 Models comfort.
07-30 MBH

One-Way Cassette

Low profile design allows for Integral condensate lift pump

easier coordination, requiring capability of more than 17” of
only about 8 inches of space lift, measured from the drain
above the ceiling. pump outlet.

Service friendly design allows all

service and maintenance to be
performed from below the unit.
No access above the ceiling is Independently controlled
required. horizontal and vertical
discharge louvers provide a high
degree of air distribution
control for maximum occupant
4 Models comfort.
05-12 MBH
 Compact Cassette

True 2x2 grille designed to fit within Integral condensate lift pump
even a narrow-T ceiling grid without capability of 14” of lift,
overlapping adjacent tiles. measured from the drain pump
Simplifies coordination with lighting outlet.
and other ceiling mounted devices.

High efficiency BLDC fan

Auto-swing air outlet louvers motor powers a Turbo fan
provide a high degree of air blade designed for low noise
distribution control for maximum operation, with sound levels
occupant comfort. below NC-30.
5 Models
05-18 MBH

Large Cassette
Large Cassette
MVAL - ME 2 A A

Independently controlled air Integral condensate lift pump

outlet louvers provide a high capability of 14” of lift,
degree of air distribution control measured from the drain pump
for maximum occupant comfort. outlet.

High efficiency BLDC fan

Service friendly design allows all motor powers a Turbo fan
service and maintenance to be blade designed for low noise
performed from below the unit. operation, with sound levels
No access above the ceiling is below NC-30 for most models.
required.
10 Models
07-48 MBH
 Indoor Units
Slim Duct

Designed for low sound

Efficient BLDC fan support levels, with noise levels as
provides up to 0.12” external low as 22 dB(A).
static, ideal for low static
applications. Integral condensate lift
pump capability of more
than 17” of lift, measured
Compact design requires from the drain pump
only ~8 inches of vertical outlet.
space above the ceiling.

Factory rear return, optional

Optional Supply Grille and bottom air return, allows the
Return Grille simplifies unit configuration to suit the
ductwork design and ductwork design limitations.
installation.
5 Models
07-24 MBH

Medium Static Ducted

Powerful BLDC fan motor features

12 fan curve ESP settings for up to
0.6” external static capability.
Integral condensate lift
pump capability of 20” of
Compact design requires lift, measured from the
only ~10 inches of vertical drain pump outlet.
space above the ceiling.
Larger capacity models
increase in width, but not
height or depth. Factory rear return, optional
bottom air return, allows the
unit configuration to suit the
Five fan speeds, in combination ductwork design limitations.
with Auto fan speed control, 9 Models
maximize occupant comfort and 07-54 MBH
minimize energy use.
High Static Ducted

Powerful BLDC fan motor features

11 fan curve ESP settings for up to
1” external static capability.
On-board auxiliary heat
output allows for direct
integration and control of
3rd party heater sources
as a secondary source of
heat.

Factory rear return, optional

Five fan speeds, in combination
bottom air return, allows the
with Auto fan speed control,
unit configuration to suit the
maximize occupant comfort and
minimize energy use. 2 Models ductwork design limitations.
72-96 MBH

NEW Multi-Position Air Handling Unit

Compatible with MRV-Link and High efficiency DC inverter

SmartHQ. delivers nominal airflow up to
0.90” in W.G. external static
pressure.

Two stage 5/8/10/15/20 KW

Vertical and horizontal Auxiliary Heater available.
compatible.

10 Models
9-60 MBH
 Indoor Units
AHU Connection Kit

An integral EEV controls An integral control board offers

refrigerant flow to the 3rd party air four standard control schemes
handling unit, providing the same to control the EEV & AHU to
advantages and degree-of-control best suit the application.
as an MRV indoor unit.
Can be used in conjunction
AHU Connection Kit compatible with other indoor units on
with all MRV outdoor units for the same system.
those who would like to use a
third-party air handler. Heavy duty galvanized steel
construction.

Installation friendly flared

piping connections for all 5 Models AHU Kit capacity can range from
models. 10 BTU/H - 249 BTU/H in one kit.
2-20 Tons

Heat Recovery Box

Four “ports” allow for Pass-thru “series” design allows

independent cooling or heating the main refrigerant piping
operation in a single, compact network to continue thru the
footprint. heat recovery box.

Four port box shown;

single valve boxes also
available.

A bi-directional design allows Internal refrigerant control is

either side of the heat managed by EEVs, resulting in lower
recovery box to serve as the sound levels and improved
piping inlet to the box. management of pressure
equalization during mode
changeover.
Controllers
Haier controls allow the user to take command of their environment. With convenient user-friendly button
layouts and clear graphic displays, the system can be easily set to meet and maintain all comfort needs.

ZONE CONTROLLERS CENTRALIZED BMS SOLUTION

Simple controllers for CONTROLLERS Designed to meet the ever-
effortless comfort. Control up Robust capability for up to 928 growing demand for integrated,
to (16) indoor units with our indoor units (800 IDU + 128 full building control. Capable of
straightforward digital interface DFS IDU) including floor layout a max of (250) indoor units with
and remote control options. views, easy to use touchscreen, multi-user management and
webserver function, alarm history logs.
tracking/history, ODU
monitoring, and weekly/daily
schedules.

Controller Accessories

MODBUS GATEWAY BACNET GATEWAY DFS TO VRF GATEWAY

Featuring energy monitoring and Used to integrate 3rd party Controller adapter that allows
support for up to (32) indoor BMS Systems for control and ductless mini-splits to connect
units per gateway; multiple monitoring of MRV5 systems to a central controller or building
gateways can be connected for with a maximum of (4) systems automation system.
large projects. and (128) indoor units.
 Controllers
MRV-Link Wireless Communication Network
Upgrade your MRV system with a wireless communication solution. Utilizing Zigbee wireless
communication protocol, MRV-Link simplifies the typical two-wire daisy chain communication
network reducing installation labor.

Main Wireless Module (IGU09)

Required primary communication
module for HP systems and VP boxes.

Sub Wireless Module (IGU10)

Required sub modules are
connected to indoor units and paired
to a main module.

Wireless Repeater (IGU11)

Optional to strengthen the wireless
mesh network over long distances or
through multiple walls.
 Accessories
Wind Baffles
The wind baffle is fabricated from durable Wind Baffle Model #
Outdoor Model #
20 gauge G90 galvanized steel. Color- (requires 2)
matched and powder coated to blend MVHP036MV2AA QAWB38A

beautifully with Haier outdoor units, MVHP048MV2AA QAWB38A

the wind baffle is engineered to provide MVHP056MV2AA QAWB38A
optimal performance when operating in
cold, harsh climates.

Panels
Indoor panels must be ordered separately with the purchase of the indoor unit.
Panel for MRV Panel for MRV Panel for MRV
Compact Cassette Large Cassette One-Way Cassette

PB-620KB PB-950KB P1B-1050IB

Fits compact cassette models: Fits large cassette models: Fits one-way cassette models:
MVAB005MV2AA MVAL007MV2AA MVAL024MV2AA MVA005ME2AA
MVAB007MV2AA MVAL009MV2AA MVAL030MV2AA MVA007ME2AA
MVAB009MV2AA MVAL012MV2AA MVAL036MV2AA MVA009ME2AA
MVAB012MV2AA MVAL015MV2AA MVAL042MV2AA MVA012ME2AA
MVAB018MV2AA MVAL018MV2AA MVAL048MV2AA

Grilles Piping Kits

Optional return and supply air grilles for Slim Duct models. For refrigerant branch piping.
Return air grilles include filter.

2 Indoor Outdoor
Heat Pump Heat Pump
1 Return Air Grilles 2 Supply Air Grilles Branch Pipe Kits: Gather Pipe Kits:
PAD0890RA PAD0890SA FQG-B335A HZG-R20A
Fits Slim Duct models: Fits Slim Duct models: FQG-B506A HZG-30A
MVAD007MV2AA MVAD007MV2AA FQG-B730A
MVAD009MV2AA MVAD009MV2AA FQG-B1350A Heat Recovery
MVAD012MV2AA MVAD012MV2AA Gather Pipe Kits:
Heat Recovery HZG-R20A
PAD1210RA PAD1210SA Branch Pipe Kits: HZG-R30A
Fits Slim Duct models: Fits Slim Duct models: FQG-R335A
MVAD018MV2AA MVAD018MV2AA FQG-R506A
MVAD024MV2AA MVAD024MV2AA FQG-R730A
FQG-R1350A
 Tools & Support
Haier Selection Software
Experience the intuitive Haier Selection Software
System, an invaluable tool empowering our customers to
effortlessly design a myriad of VRF system applications.
Craft comprehensive designs featuring refrigerant,
electrical, control, and component data drawings to gain
quality insight into your desired system.
The Selection Software System will be able to:
• Seamlessly match indoor and outdoor units for
customized solutions.
• Automatically calculate capacity data based on
location design conditions.
• Ensure system integrity by monitoring component
configurations and identifying any parameter
breaches.
• Compile a comprehensive accessory list for both
indoor and outdoor units.
• Simplify your workflow by exporting data for pricing
and report creation.

Engineering Support
Count on our dedicated team to guide and assist you at every stage of the process, ensuring a smooth journey
from conception to installation. Explore a wealth of resources on our website, providing the supporting
documentation for the available product lines. Obtain the Revit file support you need by accessing the public
BIMsmith Marketplace including all indoor and outdoor units, controls, accessories, and logos.
 Your customers turn to you for
great results, so offer them the
performance and support you can
only get from Haier!
Limited Warranty
At Haier we take pride in our workmanship, which is why we offer a 10 year parts and compressor
warranty on equipment with factory certified startups including, but not limited to:
• Complete the installation and commissioning per Haier’s instructions.
• All pipe-work including brazing was performed per Haier’s instructions.
• Correct refrigerant charge was weighed and calculated at the time of commissioning.
• The warranty will not be continued if the equipment is removed from the original installation site.
All installation and service must be performed by a licensed technician. Failure to use a licensed
technician for installation of the product voids all warranty.
For full warranty details and requirements, please see product installation manuals on our website:
https://www.geappliancesairandwater.com/air-products/vrf/.

Training
We’re with you every step of the way, from theory to application. Through the Air & Water Solutions
Learning Academy, we teach everything from service to installation to sales. For those who prefer to
learn in the field, our Regional Training Program matches professionals with experienced trainers.

Support
You can always rely on Haier to guide you through warranty processing, parts ordering, product
installation, technical documentation and more.

Pub No. 26-V2401 Rev. 01-17-24

©Copyright 2024 GE Appliances, a Haier Company.
Our continued commitment to quality products may mean a
For more info visit us: change in specifications without notice.

geappliancesairandwater.com

C US
Intertek