—

Customer information packet

ECP3771T-4

10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

Class - CLI GP A,B,C,D
Division - Division II

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
3/15/2024 10:20:24 AM
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

Specifications Part detail

Enclosure TEFC Revision V

Frame 215T Type AC
Frame Material Iron Mech. spec. 07K374
Frequency 60.00 Hz Base
Motor Letter Type Three Phase Status PRD/A
Output @ Frequency 10.000 HP @ 60 HZ Elec. spec. 07WGY826
Phase 3 Layout 07LYK374
Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Eff. date 07-12-2023
Voltage @ Frequency 460.0 V @ 60 HZ CD Diagram CD0006
XP Class and Group CLI GP A,B,C,D Poles 02
XP Division Division II Leads 3#14
Agency Approvals CSA EEV Proprietary False
NEMA PREMIUM Created date 11-29-2011
NEMA_PREMIUM
UR
CCSA US
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator Rigid
Bearing Grease Type Polyrex EM (-20F +300F)
Blower None
Constant Torque Speed Range 6
Current @ Voltage 11.000 A @ 460.0 V
Design Code B
Drip Cover No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 92.4 %
Electrically Isolated Bearing Not Electrically Isolated
Enclosure Modification Severe Duty Features
Feedback Device NO FEEDBACK
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No Heater Page 2 of 12

High Voltage Full Load Amps 11.0 a

Insulation Class F
Electrically Isolated Bearing Not Electrically Isolated
Enclosure Modification Severe Duty Features
Feedback Device CUSTOMER INFORMATION PACKET NO FEEDBACK
ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No Heater
High Voltage Full Load Amps 11.0 a
Insulation Class F
Inverter Code Inverter Duty
KVA Code H
Lifting Lugs Standard Lifting Lugs
Locked Bearing Indicator No Locked Bearing
Max Speed 5400 rpm
Motor Lead Exit Ko Box
Motor Lead Quantity/Wire Size 3 @ 14 AWG
Motor Lead Termination Flying Leads
Motor Standards NEMA
Motor Type 0742M
Mounting Arrangement F1
Number of Poles 2
Overall Length 19.50 IN
Power Factor 90
Product Family Chemical Processing (Not DC)
Pulley End Bearing Type Ball
Pulley Face Code Standard
Pulley Shaft Indicator Standard
Rodent Screen None
Service Factor 1.15
Shaft Diameter 1.375 IN
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Reversible
Shaft Slinger Indicator Shaft Slinger
Speed 3500 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing None
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Page 3 of 12
Winding Thermal 1 None
Winding Thermal 2 None
XP Temp Code T3C
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing CUSTOMER INFORMATION PACKET None215T, 0742M, TEFC, F1
ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ,
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None
XP Temp Code T3C

Page 4 of 12
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

Nameplate

NP3257

CAT.NO. ECP3771T-4
SPEC. 07K374Y826G2
HP 10 TE
VOLTS 460
AMP 11
RPM 3500
FRAME 215T HZ 60 PH 3
SER.F. 1.15 CODE H DES B CL F
RATING 40C AMB-CONT
SN
DE 6307 ODE 6307
NEMA-NOM-EFF 92.4 PF 90
G.MIN.EFF 91.0 CC 010A
T. CODE T3C T= 160

NP3260
SPEC. 07K374Y826G2
D.E. BRG. 35BC03XP30X
O.D.E. BRG. 35BC03XP30X
GREASE POLYREX EM
RPM MAX 5400 MAX. KVAR N/A

BLANK
INV.TYPE PWM
T= 160
C HP FR 60 C HP TO 90
CT HZ FROM 6 CT HZ TO 60
VT HZ FROM 3 VT HZ TO 60
Page 5 of 12
HTR-VOLTS HTR-AMPS
HTR-WATTS MAX. SPACE HEATER TEMP.
NEMA-NOM-EFF 92.4 PF 90
G.MIN.EFF 91.0 CC 010A
T. CODE T3C T= CUSTOMER INFORMATION PACKET
160 ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

NP3260
SPEC. 07K374Y826G2
D.E. BRG. 35BC03XP30X
O.D.E. BRG. 35BC03XP30X
GREASE POLYREX EM
RPM MAX 5400 MAX. KVAR N/A

BLANK
INV.TYPE PWM
T= 160
C HP FR 60 C HP TO 90
CT HZ FROM 6 CT HZ TO 60
VT HZ FROM 3 VT HZ TO 60

HTR-VOLTS HTR-AMPS
HTR-WATTS MAX. SPACE HEATER TEMP.

Page 6 of 12
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

Parts list

Part number Description Quantity

SA235040 SA 07K374Y826G2 1.000 ea
RA222003 RA 07K374Y826G2 1.000 ea
36FN3000C02SP EXFN, PLASTIC, 5.25 OD, 1.175 ID 1.000 ea
HW3201A05 3/8-16 EYEBOLT 1.000 ea
09CB1001A03G CONDUIT BOX, MACH GRAY 1.000 ea
RM1017 LEAD SEPERATOR GASKET MODEL 307 1/8" THK 1.000 ea
19XW2520A16 SCREW,1/4-20X1 TAPTITE-II OR ROLOC 91 2.000 ea
11XW1032G06 10-32 X .38, TAPTITE II, HEX WSHR SLTD U 1.000 ea
HW3001B01 BRASS CUP WASHER, FOR #10 SCREW 1.000 ea
10XN2520S06 1/4 20X3/8 HX HD CAP S.S. 2.000 ea
WD1000B16 T&B CX70TN OR L70P TERMINAL LUG 1.000 ea
37EP1101C43G TEFC 307 BRG, GRSR,RELIEF,.25-20 FH TAPS 1.000 ea
HA4051A00 PLASTIC CAP FOR GREASE FITTING 1.000 ea
HA4051A00 PLASTIC CAP FOR GREASE FITTING 1.000 ea
HW4500A17 317400 ALEMITE GREASE RELIEF 1.000 ea
HW4500A17 317400 ALEMITE GREASE RELIEF 1.000 ea
HA4054 SHORT T-DRAIN FITTING, .125" N.P.T. 1.000 ea
HW5100A08 W3118-035 WVY WSHR (WB) 1.000 ea
37EP1101A32G PU ENDPLATE MACH 1.000 ea
HW4500A01 1641B(ALEMITE)400 UNIV, GREASE FITT 1.000 ea
HA4054 SHORT T-DRAIN FITTING, .125" N.P.T. 1.000 ea
HW4500A01 1641B(ALEMITE)400 UNIV, GREASE FITT 1.000 ea
XY3118A12 5/16-18 HEX NUT DIRECTIONAL SERRATION 4.000 ea
51XB1214A20 12-14X1.25 HXWSSLD SERTYB 1.000 ea
07FH1001A01G SPL FAN HOUSING, 307, W/GREASER, GRAY EP 1.000 ea
10XN2520A28 1/4-20X 1 3/4 HEX HD 3.000 ea
WD4100A02 DP-1000 HEYCO PLUG OR 62MP1000 MICRO PL 1.000 ea
09CB1504A01G LIPPED CONDUIT BOX LID, MACH GRAY EPOXY 1.000 ea
09GS1001A01 GASKET, BOX LID, 1/8 THICK BLACK NEOPREN 1.000 ea
10XN2520A12 1/4-20 X 3/4 HEX HEAD CAP 2.000 ea
HW1001A25 LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I 2.000 ea
HA1005A07 SLINGER, OD 2.25, ID 1.344, 307 BRG 1.000 ea
Page 7 of 12
HW4600B33 V-RING SLINGER 1.375 X 1.890 X .35 VITON 1.000 ea
HW2501F21 KEY, 5/16 SQ X 2.375 1.000 ea
HA7000A02 KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA 1.000 ea
09CB1504A01G LIPPED CONDUIT BOX LID, MACH GRAY EPOXY 1.000 ea
09GS1001A01 GASKET, BOX LID, 1/8 THICK BLACK NEOPREN 1.000 ea
10XN2520A12 CUSTOMER INFORMATION PACKET ECP3771T-41/4-20
- 10HP, X 3/4 HEX
3500RPM, HEAD
3PH, CAP
60HZ, 215T, 0742M, TEFC, F1 2.000 ea
HW1001A25 LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I 2.000 ea
HA1005A07 SLINGER, OD 2.25, ID 1.344, 307 BRG 1.000 ea
HW4600B33 V-RING SLINGER 1.375 X 1.890 X .35 VITON 1.000 ea
HW2501F21 KEY, 5/16 SQ X 2.375 1.000 ea
HA7000A02 KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA 1.000 ea
MJ5001A27 32220KN GRAY SEALER *MIN BUY 4 QTS=1GAL 0.001 qt
85XU0407S04 4X1/4 U DRIVE PIN STAINLESS 2.000 ea
LB1002N LABEL,MARINE DUTY (ON ROLLS) 1.000 ea
MJ1000A02 GREASE, POLYREX EM EXXON 0.050 lb
HA3104A32 THRUBOLT- 5/16-18 X12.750 4.000 ea
MG1025N19 WILKOFAST, 778.50, RELIANCE BLUE-GREEN 8 0.036 ga
LB1624 COMBINED WARNING LABEL, ISO/ANSI PICTOGR 1.000 ea
LB1449 DIV-2/NEC WARNING LABEL 1.000 ea
LC0006 CONNECTION LABEL 1.000 ea
NP3257 SS CP SUPER-E DIV-2 UL CSA-C US EEV PREM 1.000 ea
NP3260 SS CP SUPER-E AUX DATA INFORMATION 1.000 ea
85XU0407S04 4X1/4 U DRIVE PIN STAINLESS 2.000 ea
07PA1011 PKG GRP, 07 CAST IRON PK1181 1.000 ea
MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22 1.000 ea

Page 8 of 12
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

AC Induction Motor Performance Data

Record # 47087
Typical performance - not guaranteed values

Winding: 07WGY826-R022 Type: 0742M Enclosure: TEFC

460 V, 60 Hz:
Nameplate Data
Single Voltage Motor
Rated Output (HP) 10 Full Load Torque 14.9 LB-FT
Volts 460 Start Configuration direct on line
Full Load Amps 11 Breakdown Torque 70.8 LB-FT
R.P.M. 3500 Pull-up Torque 24.2 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 32.6 LB-FT
NEMA Design Code B KVA Code H Starting Current 88.5 A
Service Factor (S.F.) 1.15 No-load Current 3.61 A
NEMA Nom. Eff. 92.4 Power Factor 90 Line-line Res. @ 25ºC 0.745 Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 40°C
S.F. Amps Temp. Rise @ S.F. Load 50°C
Locked-rotor Power Factor 30.1
Rotor inertia 0.383 LB-FT2

Load Characteristics 460 V, 60 Hz, 10 HP

% of Rated Load 25 50 75 100 125 150 S.F.

Power Factor 58 79 88 91 92 91 91
Efficiency 90 92.4 92.7 92.4 91.2 89.9 90.4
Speed 3578 3555 3529 3503 3474 3441 3515
Line amperes 4.43 6.32 8.64 11.1 13.9 17.1 13.1

Page 9 of 12
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

ABB Motors and Mechanical Inc. WINDING # 07WGY826

10 HP 3 PH 60 HZ 3500 RPM 460 V 0742M
Typical performance - not guaranteed values. TORQUES(LB-FT): PO=70.8 PU=24.2 LR=32.6 LRA=88.5
TORQUE AMPS
%EFF TORQUE RPM EFF
%PF (LB-FT) RPM KW AMPS
KW PF
100 40 3,600 20 20

95 38 3,590 19 19

90 36 3,580 18 18

85 34 3,570 17 17

80 32 3,560 16 16

75 30 3,550 15 15

70 28 3,540 14 14

65 26 3,530 13 13

60 24 3,520 12 12

55 22 3,510 11 11

50 20 3,500 10 10

45 18 3,490 9 9

40 16 3,480 8 8

35 14 3,470 7 7

30 12 3,460 6 6

25 10 3,450 5 5

20 8 3,440 4 4

15 6 3,430 3 3

10 4 3,420 2 2

5 2 3,410 1 1

0 0 3,400 0 0
0 25 50 75 100 125 150
3/15/2024 ACPERF, record # 47087 PERCENT OF RATED OUTPUT (10 HP)

Page 10 of 12
 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

8 7 6 5 4 3 2 1
07LYK374

D 717-750 = 19.49 14.62 D

8.87 5.75
9.11 3.88

AUXILIARY NP 3.38
PLUG (WHEN REQ'D) 2.04

C C
12.19 5.74

.31 KEY
2.38 LONG

1.3750
1.3745
5.25
5.19
FORSHEDA LEAD
B SLINGER HOLE B
1.00 N.P.T.

8 HOLES
GROUND DRAIN
Ø.41
SLINGER LUG FITTING 4.25 4.25

5.50 (EA. END)

7.25 4.82
5.50 .57
9.63
7.00 3.51

8.13

A A

07LYK374
CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT THE PRODUCT WILL PERFORM SUITABLY IN THE INTENDED APPLICATION

BALDOR - RELIANCE
REV. DESC: CONVERT AUTOCAD DRAWING TO SWD ®
REV: G VERSION: 07 REVISED: 11:34:04 11/21/2022 TDR: 000001199231
MODEL NO. 07LYK374 REF: -
STD HORZ 213-5T TEFC M CP W/6307 BRGS, LIPPED KOBX LID
BY: ENALEM0 B
8 7 6 5 4 3 2 1

07K374: TEFC RG 213-215T CP M N F1 Page 11 of 12

 CUSTOMER INFORMATION PACKET ECP3771T-4 - 10HP, 3500RPM, 3PH, 60HZ, 215T, 0742M, TEFC, F1

07WGY012: Electrical Design Page 12 of 12