ENGLISH

_index
www.lg.com
Copyright © 2022 LG Electronics Inc.
All Rights Reserved.

LED TV*
OWNER’S MANUAL
Safety and Reference

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully

before operating your set and retain it
for future reference.

The model and serial number of the product are

located on the back and on one side of the product.
Record them below in case you ever need service.

Model

Serial No.

*MFL718464032211REV06*
 Before reading this manual
•• Read this manual thoroughly before operating your TV, and keep it for future reference.
•• On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its contents on your PC or
mobile device.
•• User Guide : For more information about this TV, read the USER GUIDE embedded in the product. (Depending on model)
-- To open the USER GUIDE → → [Support] → [User Guide]

Separate Purchase
•• Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These
devices only work with certain models.
•• The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
•• Magic Remote Control :
Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.
•• A cable to connect antennas and external devices must be purchased separately.
Note
•• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
•• The items supplied with your product may vary depending on the model.
•• Image shown may differ from your TV.

Warning! Safety instructions

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS -- Near flammable objects such as gasoline or candles, or expose
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. the TV to direct air conditioning.
•• Do not place the TV and/or remote control in the following -- Do not install in excessively dusty places.
environments: Otherwise, this may result in fire, electric shock, combustion/
-- Keep the product away from direct sunlight. explosion, malfunction or product deformation.
-- An area with high humidity such as a bathroom. •• Ventilation
-- Near any heat source such as stoves and other devices that -- Install your TV where there is proper ventilation. Do not install in
produce heat. a confined space such as a bookcase.
-- Near kitchen counters or humidifiers where they can easily be -- Do not install the product on a carpet or cushion.
exposed to steam or oil. -- Do not block or cover the product with cloth or other materials
-- An area exposed to rain or wind. while unit is plugged in.
-- Do not expose to dripping or splashing and do not place objects •• Take care not to touch the ventilation openings. When watching the
filled with liquids, such as vases, cups, etc. on or over the TV for a long period, the ventilation openings may become hot.
apparatus (e.g., on shelves above the unit).

2
•• Protect the power cord from physical or mechanical abuse, such as being •• Do not use high voltage electrical equipment near the TV (e.g., a bug
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular zapper). This may result in product malfunction.
attention to plugs, wall outlets, and the point where the cord exits the •• Do not attempt to modify this product in any way without written
device. authorization from LG Electronics. Accidental fire or electric shock
•• Do not move the TV whilst the Power cord is plugged in. can occur. Contact your local customer service for service or repair.
•• Do not use a damaged or loosely fitting power cord. Unauthorized modification could void the user’s authority to operate
•• Be sure to grasp the plug when unplugging the power cord. Do not pull this product.
on the power cord to unplug the TV. •• Use only an authorized attachments / accessories approved by LG
•• Do not connect too many devices to the same AC power outlet as this Electronics. Otherwise, this may result in fire, electric shock, malfunction,
could result in fire or electric shock. or product damage.
•• Disconnecting the Device from the Main Power •• Never disassemble the AC adapter or power cord. This may result in fire
-- The power plug is the disconnecting device. In case of an emergency, or electric shock.
the power plug must remain readily accessible. •• Handle the adapter carefully to avoid dropping or striking it. An impact
•• Do not let your children climb or cling onto the TV. Otherwise, the TV may could damage the adapter.
fall over, which may cause serious injury. •• To reduce the risk of fire or electrical shock, do not touch the TV with wet
•• Outdoor Antenna Grounding (Can differ by country): hands. If the power cord prongs are wet or covered with dust, dry the
-- If an outdoor antenna is installed, follow the precautions below. power plug completely or wipe dust off.
An outdoor antenna system should not be located in the vicinity of •• Batteries
overhead power lines or other electric light or power circuits, or where -- Store the accessories (battery, etc.) in a safe location out of the reach
it can come in contact with such power lines or circuits as death or of children.
serious injury can occur. -- Do not short circuit, disassemble, or allow the batteries to overheat.
•• Never touch this apparatus or antenna during a lightning storm. You may Do not dispose of batteries in a fire. Batteries should not be exposed
be electrocuted. to excessive heat.
-- Caution : Risk of fire or explosion if the battery is replaced by an
•• Make sure the power cord is connected securely to the TV and wall socket
incorrect type.
if not secured damage to the Plug and socket may occur and in extreme
cases a fire may break out. •• Moving
-- When moving, make sure the product is turned off, unplugged, and
•• Do not insert metallic or inflammable objects into the product. If a
all cables have been removed. It may take 2 or more people to carry
foreign object is dropped into the product, unplug the power cord and
larger TVs. Do not press or put stress on the front panel of the TV.
contact the customer service.
Otherwise, this may result in product damage, fire hazard or injury.
•• Do not touch the end of the power cord while it is plugged in. You may
•• Keep the packing anti-moisture material or vinyl packing out of the reach
be electrocuted.
of children.
•• If any of the following occur, unplug the product immediately
•• Do not allow an impact shock, any objects to fall into the product, and do
and contact your local customer service.
not drop anything onto the screen.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC adapter, •• Do not press strongly upon the panel with a hand or a sharp object such
power cord, or TV). as a nail, pencil, or pen, or make a scratch on it. It may cause damage
-- If you smell smoke or other odors coming from the TV. to screen.
-- When lightning storms or when unused for long periods of time. •• Cleaning
Even the TV is turned off by remote control or button, AC power source is -- When cleaning, unplug the power cord and wipe gently with a soft/
connected to the unit if not unplugged in. dry cloth. Do not spray water or other liquids directly on the TV. Do
not clean your TV with chemicals including glass cleaner, any type of
air freshener, insecticide, lubricants, wax (car, industrial), abrasive,
thinner, benzene, alcohol etc., which can damage the product and/
or its panel. Otherwise, this may result in electric shock or product
damage.

3
 Installation
Lifting and moving the TV Securing TV to the Wall
Please note the following advice to prevent the TV from being scratched or 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of
damaged and for safe transportation regardless of its type and size. the TV.
•• It is recommended to move the TV in the box or packing material that • If there are bolts inserted at the eye-bolts position, remove the bolts
the TV originally came in. first.
•• Before moving or lifting the TV, disconnect the power cord and all cables. 2 Mount the wall brackets with the bolts to the wall. Match the location of
the wall bracket and the eye-bolts on the rear of the TV.
•• When holding the TV, the screen should face away from you to avoid
damage. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make
sure to keep the rope horizontal with the flat surface.
•• Hold the top and bottom of the TV frame firmly. Make sure not to hold
the transparent part, speaker, or speaker grill area.
•• When transporting a large TV, there should be at least 2 people. •• Use a platform or cabinet that is strong and large enough to support the
TV securely.
•• When transporting the TV, do not expose the TV to jolts or excessive
vibration. •• Brackets, bolts and ropes are not provided. You can obtain additional
accessories from your local dealer.
•• When transporting the TV, keep the TV upright, never turn the TV on its
side or tilt towards the left or right.
•• Do not apply excessive pressure to cause flexing / bending of frame Mounting to the Wall
chassis as it may damage screen. Attach an optional wall mount bracket at the rear of the TV carefully and
•• When handling the TV, be careful not to damage the protruding buttons. install the wall mount bracket on a solid wall perpendicular to the floor.
When you attach the TV to other building materials, please contact qualified
personnel. LG recommends that wall mounting be performed by a qualified
•• Avoid touching the screen at all times, as this may result in damage to professional installer. We recommend the use of LG’s wall mount bracket.
the screen. LG’s wall mount bracket is easy to move with cables connected. When you
•• When attaching the stand to the TV set, place the screen facing down on do not use LG’s wall mount bracket, please use a wall mount bracket where
a cushioned table or flat surface to protect the screen from scratches. the device is adequately secured to the wall with enough space to allow
connectivity to external devices. It is advised to connect all the cables before
installing fixed wall mounts.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (minimum) space from the wall for proper ventilation.
2 Connect the power cord to a wall outlet.

•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts
when assembling the product. (Doing so may damage the product.)
•• Do not use any unapproved items to ensure the safety and product life
span.
•• Any damage or injuries caused by using unapproved items are not
covered by the warranty.
•• If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
•• When assembling the stand, ensure that all of the provided screws are
attached. If the screws are not fully tightened, the product may tilt or
tip over, resulting in damage. Tightening the screws with excessive force
may cause them to come off due to abrasion of the screw joint.

4
 Antenna/Cable
•• Remove the stand before installing the TV on a wall mount by
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
performing the stand attachment in reverse.
•• For more information of screws and wall mount bracket, refer to the •• Use a signal splitter to use more than 2 TVs.
Separate purchase. •• If the image quality is poor, install a signal amplifier properly to improve
•• If you intend to mount the product to a wall, attach VESA standard the image quality.
mounting interface (optional parts) to the back of the product. When •• If the image quality is poor with an antenna connected, try to realign the
you install the set to use the wall mounting bracket (optional parts), fix antenna in the correct direction.
it carefully so as not to drop. •• An antenna cable and converter are not supplied.
•• When mounting a TV on the wall, make sure not to install the TV by •• For a location that is not supported with Ultra HD broadcasting, this TV
hanging the power and signal cables on the back of the TV. cannot receive Ultra HD broadcasts directly. (Depending on model)
•• Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
•• When installing the wall mounting bracket, it is recommended to cover Satellite dish
the stand hole using tape, in order to prevent the influx of dust and Connect the TV to a satellite dish to a satellite socket with a satellite RF cable
insects. (Depending on model) (75 Ω). (Depending on model)

Starting TV
Turning on the TV Note
You can simply operate the TV functions, using the button. •• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
Power On (Press) •• Your TV’s OSD (On Screen Display) may differ slightly from that shown
Power Off1) (Press and Hold) in this manual.
Menu Control (Press2)) •• The device must be easily accessed to a location outlet near the access.
Menu Selection (Press and Hold3)) Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
1) All running apps will close, and any recording in progress will stop.
(Depending on country)
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.

5
 Connections
Connect various external devices to the TV and switch input modes to select IR Blaster
an external device. For more information of external device’s connection, refer
Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,
to the manual provided with each device.
soundbar, game consoles, etc., using the IR Blaster. (Depending on country)
(Depending on model)
HDMI
Note
•• When connecting the HDMI cable, the product and external devices •• Connect the IR Blaster cable to the TV’s IR Blaster port.
should be turned off and unplugged. •• Use universal control settings to control the device.
•• Supported HDMI Audio format (Depending on model): •• Secure the IR Blaster with the 3M tape provided.
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs,
Note audio systems, USB storage devices, PC, gaming devices, and other external
•• If the device connected to Input Port also supports HDMI Deep Colour, devices.
your picture may be clearer. However, if the device doesn’t support it, it
may not work properly. In that case, change the TV’s [HDMI Deep Colour] Note
setting to off. (Depending on model) •• The external device connection may differ from the model.
•• → → [General] → [Devices] → [HDMI Settings] → [HDMI •• In PC mode, there may be noise associated with the resolution, vertical
Deep Colour] (Depending on model) pattern, contrast or brightness. If noise is present, change the PC output
•• Use a certified cable with the HDMI logo attached. to another resolution, change the refresh rate to another rate or adjust
the brightness and contrast on the [Picture] menu until the picture is
•• If you do not use a certified HDMI cable, the screen may not display or a
clear.
connection error may occur.
•• In PC mode, some resolution settings may not work properly depending
•• Recommended HDMI Cable Types
on the graphics card.
-- Ultra High Speed HDMI®/™ cable (3 m or less)
•• If Ultra HD content is played on your PC, video or audio may become
disrupted intermittently depending on your PC’s performance.
USB (Depending on model)
Some USB Hubs may not work. If a USB device connected using a USB Hub •• When connecting to a wired LAN, use a CAT 7 cable with high-speed
is not detected, connect it to the USB port on the TV directly. (Depending on Internet transmission. (Only when port is provided.)
model)

Note
•• For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension cable
that supports if the USB cable or USB memory stick does not fit
into your TV’s USB port. (Depending on model)

6
 Specifications
(Depending on country)

Broadcasting Specifications
Digital TV Analogue TV
(Depending on country) (Depending on country)
DVB-S/S2
PAL/SECAM B/G, D/K, I
Television system DVB-T/T2
SECAM L
DVB-C
DVB-S/S2 DVB-C DVB-T/T2
VHF III : 174 ~ 230 MHz
Program coverage UHF IV : 470 ~ 606 MHz 46 ~ 862 MHz
950 ~ 2,150 MHz 46 ~ 890 MHz UHF V : 606 ~ 862 MHz
S Band II : 230 ~ 300 MHz
S Band III : 300 ~ 470 MHz
Maximum number of
6,000 3,000
storable programmes
External antenna
75 Ω
impedance
CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

•• Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced
8K images will vary depending on the source content. (Depending on model)

Environment condition
Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %

•• For information of the power supply and power consumption, refer to the label attached to the product.
-- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending on the model or country, the typical power consumption may not be on label.

7
 Product Information

Open Source Software Notice

Information
To obtain the source code that is contained in this product, under GPL, LGPL,
MPL, and other open source licenses that have the obligation to disclose
source code, and to access all referred license terms, copyright notices and
other relevant documents please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three
years after our last shipment of this product.

Licenses

(Magic Remote supported models only)

8
 Troubleshooting
In TV / HDMI input, press the button on the remote control three times to display the model name and serial number on the screen.

Cannot control the TV with •• Check the remote control sensor on the product and try again.
the remote control. •• Check if there is any obstacle between the product and the remote control.
•• Check if the batteries are still working and properly installed ( to , to ).
No image display and no •• Check if the product is turned on.
sound is produced. •• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly. •• Check the power control settings. The power supply may be interrupted.
•• Check if the auto-off function is activated on the settings related time.
•• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
When connecting to the •• Turn the TV off/on using the remote control.
PC (HDMI), no signal is •• Reconnect the HDMI cable.
detected. •• Restart the PC with the TV on.
Abnormal Display •• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is
nothing wrong with product.
•• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not
affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is
not subject to exchange or refund.
•• You may find different brightness and colour of the panel depending on your viewing position(left/right/top/
down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not malfunction.
•• Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on
the TV screen for a long period of time.
Generated Sound •• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal
contraction due to temperature and humidity. This noise is common for products where thermal deformation is
required.
•• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which
supplies a large amount of current to operate a product. It varies depending on the product. This generated sound
does not affect the performance and reliability of the product.

•• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the
guide panel. (Depending on model)
•• Make sure to wring any excess water or cleaner from the cloth.
•• Do not spray water or cleaner directly onto the TV screen.
•• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

9
 Using Magic Remote Control
Power Turns the TV on or off. Microphone Number buttons Enters numbers.
Accesses the [Guide]. Accesses the [Quick Help].
Accesses the saved programmes list. More actions Displays more remote
Accesses the [Edit Quick Access]. control functions.
-- [Edit Quick Access] is a feature that Audio descriptions function will be
allows you to enter a specified app or enabled.
Live TV directly by pressing and holding Programme buttons Scrolls through the
the number buttons. saved programmes.
Volume buttons Adjusts the volume Mute Mutes all sounds.
level. Mute Accesses the [Accessibility] menu.
Home Accesses the Home menu. Voice recognition Network connection
Home Launches the last used apps. is required to use the voice recognition
Wheel (OK) Press the centre of function.
button to select a menu. You can change Check for recommended content. (Some
programmes by using button. recommended services may not be
Wheel (OK) Accesses the [Magic Explorer]. available in some countries.)
You can run the [Magic Explorer] feature Voice recognition Speak while pressing
when the pointer colour is changed to and holding the button to use the voice
purple. If watching a programme, press recognition feature.
and hold down the pointer onto the video. 1 1 Input Changes the input source.
When using [TV Guide], [Settings], [Sports 1 1
Input Accesses the [Home Dashboard].
Alert], or [Art Gallery], press and hold 1 1
down on the text. Q. Settings Accesses the Quick Settings.
Up/Down/Left/Right Press the up, Q. Settings Displays the [All Settings]
down, left or right button to scroll the menu.
menu. If you press buttons while the
pointer is in use, the pointer will disappear These access special functions in some
from the screen and Magic Remote will menus.
operate like a general remote control. To Red button Runs the record function.
display the pointer on the screen again,
shake Magic Remote to the left and right. 1 Streaming Service buttons Connects to
the Video Streaming Service.
Back Returns to the previous level.
Back Clears on-screen displays and returns
to last input viewing.

Note To use the button, press and hold for more than 1 second.

10
The descriptions in this manual are based on the buttons on the remote Connecting Smart Devices using NFC Tagging
control. Please read this manual carefully and use the TV correctly.
(Some buttons and services may not be provided depending on models NFC is technology that uses Near Field Communication (13.56 MHz),
or regions.) allowing you to conveniently send and receive information without
separate settings. By bringing a smart device near the NFC-enabled
remote control, you can install the LG ThinQ app and connect the device
How to register the Magic Remote Control to the TV.
To use the Magic Remote, first pair it with your TV.
1 Turn on NFC in the smart device’s settings. To use NFC with Android
1 Put batteries into the Magic Remote and turn the TV on.
devices, set the NFC option to enable ‘read/write tags’ in the smart
2 Point the Magic Remote at your TV and press the Wheel (OK) on device's settings. The NFC settings may vary depending on the device.
the remote control.
2 Bring the smart device near the (NFC) on the remote control. The
* If the TV fails to register the Magic Remote, try again after turning the required distance for NFC tagging is about 1 cm.
TV off and back on.
3 Follow the instructions to install the LG ThinQ app on your smart
device.
How to deregister the Magic Remote Control 4 Retagging the smart device to the remote control allows you to
Press the (Back) and (Home) buttons at the same time, for five conveniently access various features on the connected TV through the
seconds, to unpair the Magic Remote with your TV. LG ThinQ app.
* Press and hold the (Home) and (Q. Settings) buttons for Note
more than 5 seconds to disconnect and re-register the Magic Remote •• This feature is available for NFC-enabled smart devices only.
at the same time. •• This feature is only available if the remote control has an NFC logo.

•• It is recommended that an Access Point (AP) be located more than Specifications

0.2 m away from the TV. If the AP is installed closer than 0.2 m, the
Magic remote control may not perform as expected due to frequency Specifications (MR22GN, MR22GA)
interference. Frequency range Output Power (Max.)
Bluetooth 2,400 to 2,483.5 MHz 7 dBm
Using Always Ready
NFC *
13.553 to 13.567 MHz -13.27 dBuA/m @ 10 m
(Depending upon model)
You can operate the TV and connect to Bluetooth with direct voice * Only MR22GN
recognition while the power is off.
* → → [General] → [Always Ready], setting [Enable the
function] to on.
* Pressing the button while watching TV switches the screen to
[Always Ready] that is turned on, and pressing the button once
more turns the screen to [Always Ready] that is turned off.
* Press the (Home) button or the (Back) button to watch TV
when the screen is in [Always Ready] that is turned on.
* Press the Wheel (OK) button to display the wallpaper when the
screen is in [Always Ready] that is turned off, and press the button
to watch TV.

Note
•• Using Always Ready may increase energy consumption.
•• For more information about the feature, refer to the → →
[Support] → [User Guide] → [Troubleshooting] → [Learn More
About Always Ready].

11
 Using Remote Control
Power Turns the TV on or off. Input Changes the input source.
Recalls your preferred subtitle in digital
, Teletext buttons These buttons are mode.
used for teletext. Q. Settings Accesses the Quick Settings.
Shows programme guide. Number buttons Enters numbers.
Edits QUICK ACCESS. Accesses the [Quick Help].
-- QUICK ACCESS is a feature that More actions Displays more remote
allows you to enter a specified app control functions.
Mute Mutes all sounds.
or Live TV directly by pressing and
holding the number buttons. Mute Accesses the [Accessibility] menu.
Volume buttons Adjusts the volume Search Check for recommended content.
level. 1 1
(Some recommended services may not be
available in some countries.)
Programme buttons Scrolls through 1 1
Search for content such as TV
the saved programmes.
programmes, movies and other videos, or
OK Selects menus or options and perform a web search by entering text in
confirms your input. the search bar.
OK Accesses the [Magic Explorer]. When You can watch TV or LG Channels.
using [TV Guide], [Settings], [Sports Home Accesses the Home menu.
Alert], or [Art Gallery], press and hold
Home Launches the last used apps.
down on the text.
, , Navigation buttons (up/down/left/
Accesses the saved programmes list.
, right) Scrolls through menus or options.
, Control buttons Control buttons for
Back Returns to the previous level.
, , media contents.
Clears on-screen displays and returns to
, TV viewing.
Starts to record and displays record These access special functions in some
menu. (Only Time MachineReady menus.
supported model)

1 Streaming Service buttons Connects

to the Video Streaming Service.

Note To use the button, press and hold for more than 1 second.

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
(Some buttons and services may not be provided depending on models or regions.)
(Depending on model)

12