DEA-41T1 Exam - Free Actual Q&As, Page 1 - ExamTopics

7/25/22, 2:54 PM DEA-41T1 Exam – Free Actual Q&As, Page 1 | ExamTopics
- Expert Verified, Online, Free.
 Custom View Settings
Topic 1 - Single Topic
Question #1 Topic 1
An administrator is implementing LTO-5 drives in their backup solution. They plan to disable hardware data compression through their backup
appliance.
What is the maximum data rate that can be achieved?
A. 80 MB/s
B. 120 MB/s
C. 140 MB/s
D. 160 MB/s
Question #2 Topic 1
A server is experiencing issues with completing POST. The environment does not have a KVM or `Crash cart` available to view where the system is
halting.
Which method can an administrator use to determine the first place to start troubleshooting?
A. Run OpenManage Essentials
B. Check rear lights on the server chassis
C. Run Repository manager
D. Check iDRAC Post Code
Question #3 Topic 1
What advantage do NVDIMMs have over other server-based memory technologies?
A. Operate at lower voltages to save on power costs.
B. Lower cost per GB of capacity
C. Require less cooling than traditional memory DIMMs
D. Can retain contents even after a power loss
https://www.examtopics.com/exams/dell/dea-41t1/custom-view/ 1/35
Question #4 Topic 1
What is an accurate statement in reference to software RAID?
A. Software RAID does not have any data integrity issues
B. Software RAID requires a hardware license
C. Software RAID is an additional cost
D. Software RAID uses CPU resources
Question #5 Topic 1
What is a consideration for a hardware administrator who is physically installing multiple servers into a rack?
A. Observe load requirements specified in documentation for the switch.
B. Avoid unevenly loading the rack and creating a hazard.
C. Ensure that the server can connect to Windows updates
D. Ensure that the associated UPS can also power the top-of-rack switch.
Question #6 Topic 1
Where can a history of change related to hardware components for a managed system be found?
A. Windows Event Logs
B. Raid Controller Logs
C. Lifecycle Logs
D. System Event Logs
Question #7 Topic 1
What types of data transfer are used by Dell EMC servers to connect mass storage devices?
A. USB, Ethernet, SSD, and CSI
B. SAS, USB, Ethernet, and SSID
C. SSID, CSI, USB, and SAS
D. Ethernet, SSID, CSI, and SAS
Question #8 Topic 1
Which RAID level is recommended for high speed data access and maximum storage capacity?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Question #9 Topic 1
What is the Dell EMC iSM?
A. Agent that expands iDRAC management functionality into the host operating system
B. Program that is installed and provides one-to-one systems management functionality
C. Systems management console that simplifies monitoring of multiple Dell EMC servers
D. Out-of-band management platform on Dell EMC servers
Question #10 Topic 1
Which protocol resolves IP addresses into MAC addresses?
A. ARP
B. DHCP
C. DNS
D. STP
For which use case is Dell EMC OpenManage Essentials recommended for installation?
A. Comprehensive, one-to-one systems management solution for remote or local servers
B. Management console for one-to-many monitoring of Dell EMC infrastructure
C. Operation of hardware while iDRAC is non-functional
D. Management and integration of operating system updates across an entire environment
What occurs during the Data Wiping process?
A. Destroys CDs and DVDs by pulverizing and cross-cut shredding
B. Disposes sensitive data using file detection, disk formatting, and file encryption
C. Temporarily removes data from a readwrite medium so that it can no longer be read
D. Logically connects storage media to a bulk-wiping device
What should an administrator review, prior to deploying an operating system (OS), to confirm there are no hardware incompatibilities with the
desired OS?
A. iDRAC SEL
B. HCL
C. BPA
D. LCC Log
What is the purpose of the DNS role?
A. Send out emails from a server to a client
B. Translate domain names into IP address
C. transfer computer files between a client and a server
D. Distribute and update dynamic IP address
What does well organized documentation help a system administrator improve?
A. Cost of running a server
B. Visibility of a system during an audit.
C. Processor efficiency
D. Recovery time in the event of a failure
Which advanced feature does a Dell EMC energy-smart power supply offer?
A. Provides thermal management of the supply
B. Reverses airflow to meet data center requirements
C. Throttles output to power-heavy components
D. Ability to update firmware without the need for downtime
What is commonly used by a system administrator to prevent electrostatic discharge when working on components inside a Dell EMC PowerEdge
server?
A. Uninterruptible Power Supply
B. Voltage Regulator
C. Anti-static wrist strap
D. Non anti-static floor mat
A system administrator wants to view the results of the Best Practices Analyzer (BPA) for their local server. Which Windows built-in tool can they
use to accomplish this?
A. Activity Monitor
B. Server Manager-Local Server
C. Resource Monitor
D. Security Compliance Manager
What is a key characteristic of a Type 2 hypervisor?
A. Runs directly on the host with direct access to the hardware
B. Runs directly on the host without direct access to the hardware
C. Runs on an operating system installed on the host with direct access to the hardware
D. Runs on an operating system installed on the host without direct access to the hardware
What distinguishes server CPUs from client CPUs?
A. Server CPUs have no overlocking features; client CPUs do have them
B. Server CPUs use identical socket types, client CPUs use multiple socket types
C. Server CPUs frequently have fewer cores and more processing power than client CPUs
D. Servers tend to have fewer CPUs installed than clients
What is the maximum number of iDRAC Virtual Console sessions that can be run simultaneously?
A. 5
B. 5
C. 6
D. 7
Which dual-level RAID configuration is combined to configure RAID 10 on a single array?
A. RAID 0 RAID 1, mirrored and parity
B. RAID 0 RAID 1, mirrored and striped
C. RAID 1 RAID 0, parity and striped
D. RAID 0 RAID 1, striped and mirrored
DRAG DROP -
What is the correct sequence of message exchanges between a DHCP server and Client for a connection request?
Select and Place:
Which open source operating system is designed to handle demanding business applications such as network and system administration,
database management, and web services?
A. Linux
B. AIX
C. Windows
D. ESXi
DRAG DROP -
A system administrator needs to install an operating system (OS) on a server that is in BIOS boot mode. What is the correct sequence of steps to
set the server into BIOS mode?
Select and Place:
An administrator is scheduling a software patch in an enterprise environment. What is a consideration for the administrator regarding potential
impact to users?
A. Server Redundancy
B. Update file size
C. Disruption of workflow
D. Network Bandwidth
A system administrator notices that a client system cannot access the Internet. The IP address is 169.254.10.26. The client system is correctly
wired.
Which server role should the administrator investigate?
A. PROXY
B. TCP/IP
C. SNMP
D. DHCP
Which initial menu option should be chosen from the iDRAC Virtual Console to access System Setup?
A. Lifecycle Controller
B. Next Boot
C. Normal Boot
D. Virtual CD/DVD
What is a benefit of SAS technology?
A. Has no moving parts available
B. Used for storage back-plane or HDD carrier applications
C. Easy to manage cable and cable length
D. Has two drives per cable connector
Which solution is recommended for installing a hypervisor in a Dell EMC PowerEdge rack server or in a hyper-converged infrastructure (HCI) host?
A. FC HBA
B. BOSS
C. CPU
D. NVDIMM
What is an accurate statement regarding 40 Gbps Ethernet ports?
A. Can be used as a single 40 Gb connector or used as four 10 Gb connections
B. Cannot be configured into a stack connection
C. Must be segmented into four independent 10 Gb connections
D. May only be used as a non-negotiable, single 40 Gb link
Which Ethernet cable type should be installed if high interference is a concern?
A. RJ45
B. 802.11n
C. STP
D. UTP
Why is a mandatory practice to review the service manual prior to replacing or reseating components on a Dell EMC PowerEdge server?
A. Service manual gives detailed instructions at which firmware levels the components should run
B. Service manual provides vital information on which live wires in the system to avoid, to ensure electric shock does not occur
C. Service manual covers crucial cable routing and special part handling instructions
D. Service manual describes how to reconfigure the server for optional performance-boosting settings, increasing efficiency
Based on the exhibit, which device is a Boot Optimized Storage Solution (BOSS) Controller?
A. A
B. B
C. D.
D. C
What is the maximum bootable storage capacity supported by BIOS mode?
A. 512 GB
B. 1 TB
C. 2 TB
D. 4 TB
What is the maximum amount of hard drives required per RAID set, when configuring RAID 50?
A. 2
B. 3
C. 4
D. 5
Why is Error Correcting Code (ECC) memory beneficial in Dell EMC PowerEdge servers?
A. Provides a separate memory management scheme for memory operation?
B. Creates redundancy by mirroring physically installed memory
C. Can present more memory than what is physically installed
D. Can repair errors without interrupting other server operations
Based on the exhibit, Grid Redundant Mode is selected on a Dell EMC PowerEdge server and the Hot Spare feature is disabled. How is the power
output distributed in a dual-power supply configuration?
A. Equally across both power supplies
B. Only one power supply ever provides power
C. power supply 2 only provides output when power supply 1 reaches maximum capacity
D. Majority of the output is always provided by power supply 1
Which error control technique is used by ECC memory?
A. Repetition codes
B. Hamming code
C. Checksums
D. Cryptographic hash functions
Refer to the exhibit.
An administrator has a standalone M1000e chassis with only a single CMC module. The CAT6 cable is plugged into the Ethernet port closest to
the DB-9 connector. The power indicator light is lit but the administrator is unable to access the CMC module.
What could be the cause of this issue?
A. No DB-9 serial cable is plugged in
B. CMC module was removed without powering off the chassis
C. CAT6 cable into the stacking port
D. CAT5 cable is required for connection to CMC
DRAG DROP -
A customer needs to access webmail on a laptop. Using a browser, they type in the URL and the page displays correctly. What is the correct
sequence of steps used to load the webpage?
Select and Place:
What is the primary reason for a server emitting a greater heat load than a client system?
A. Smaller system fans in the server
B. Higher ambient temperature in the data center
C. Less space for air to circulate inside the server chassis
D. Increased power usage of the server components
A system administrator is configuring the file transfer role of a server. Important data needs to be accessed by end users.
Which file transfer service provides secure transfer of the data?
A. SNMP
B. FTP
C. SFTP
D. TFTP
Which RAID level has the lowest overhead of all RAID types?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
What is a characteristic of server and user authenticator?
A. Server does not need to know exactly who is accessing the information or site for authentication.
B. Authentication uses logs to determine tasks each individual performs and which files the user is accessing.
C. Authentication is commonly implemented through login ID and password in private and public networks.
D. User does not need to provide their identity to the server or the client for authentication.
What benefit is offered by modular servers over rack servers?
A. Lower power requirements result in lower datacenter operating costs.
B. Higher density is achieved by reducing the amount of consumed rack space
C. Hot replacement of any server in the enclosure is possible
D. All hardware technology is integrated into a single circuit board
What is an example of a dedicated server?
A. Virtual Switch server
B. Clustered server
C. Database server
D. Secure Shell server
Which RAID level requires a minimum of four hard drives?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
A General Purpose GPU (GPGPU) is commonly installed in Dell EMC PowerEdge servers. Which component does a GPGPU complement when
processing tasks?
A. iDRAC modules
B. Memory
C. Network Interface Cards
D. CPU
Based on the exhibit, which type of virtual switch is vSwitch1?
A. External
B. Open
C. Private
D. Public
A RAID 5 configuration with 20 hard drives loses one hard drive. How many additional hard drive failures can this configuration tolerate before
experiencing data loss?
A. 0
B. 1
C. 2
D. 3
A system administrator is tasked with troubleshooting a connectivity issue with a CMC module. Connection through a wired Ethernet connection is
not possible.
Which alternative connection method should the administrator use?
A. Serial
B. NFC
C. SSH
D. Wireless
What is a benefit of having an Uninterruptible Power Supply (UPS) attached to a server?
A. Provides permanent power to a server, eliminating the need for a wall outlet.
B. Keeps a server running during a long power outage
C. Provides short-term protection to allow a server to be shut down gracefully.
D. Replaces the need for power supplies in a server.
Which one-to-many Dell EMC solution provides a simple interface for system administrators to maximize the uptime and health of the Dell EMC
systems?
A. Update Packages
B. Repository Manager
C. DataCenter Capacity Planner
D. OpenManage Essentials
A system administrator is unable to install Hyper-V on a Microsoft Windows Server 2016. What is a possible reason for this issue?
A. Virtualization feature turned on in BIOS
B. System is equipped with a 64-bit processor
C. System has 2 GB memory
D. Standard license in installed
A backup administrator is migrating their tape drive backup solution from LTO-4 to LTO-6 generation. Both LTO-3 and LTO-4 media are presently in
use. All LTO-
4 drives are to be replaced by LTO-6 drives, but the administrator plans to avoid replacing a maximum amount of the tapes already in use.
What should the administrator do to accomplish this task?
A. Back up all critical data on at least LTO-4 tapes in order to be read it from their new LTO-6 drives.
B. Nothing, the administrator will still be able to read any tape currently in use will their LTO-6 drive and will be able to retrieve data if needed
C. Back up all critical data from LTO-3 tapes to LTO-4 tapes Next, back up LTO-4 tapes to LTO-5 tapes Next, back up LTO-5 tapes to LTO-6 tapes
D. Back up all critical data from LTO-3 tapes to LTO-4 tapes Next, back up LTO-4 tapes to LTO-5 tapes
What is a backup process?
A. Capturing historical records used for future reference and is not actively used by the server.
B. Using server technologies data from one computer node to another.
C. Moving data that is no longer actively used to a separate storage device, for long-term retention.
D. Copying files to a secondary site for preservation in case of equipment failure or other catastrophe.
What is the objective of server configuration management in an enterprise environment?
A. Reduce cost of servers regardless of workload types utilization types, or performance requirements.
B. Minimize cost of servers and to extend the lifetime of servers being used.
C. Maximize performance per watt at all utilization levels.
D. Maximize application performance or I/O throughput.
A system administrator recently hired by a company notices that the client systems are set with static IP addresses. The administrator wants the
IP addresses automatically distributed to each computer.
Which server role is required to perform this task?
A. Web Server
B. DHCP
C. DNS
D. Active Directory
Simultaneously pressing the `Ctrl` + `Shift` + `Esc` keys launches which Microsoft Windows built-in tool?
A. Task Manager
B. Network Monitor
C. Performance Monitor
D. Resource Monitor
Where in the iDRAC GUI can the recording of the last three boot cycles of a Dell EMC PowerEdge server be found?
A. Maintenance > Troubleshooting
B. Maintenance > Diagnostics
C. Troubleshooting > SupportAssist
D. Troubleshooting > Lifecycle Log
A server room has two power grids, A and B. PSU1 on each server is on grid A, and PSU2 is on grid B. Grid B has significantly lower load compared
to grid A.
What is the most likely cause of the unbalanced power load?
A. PSU1 is a higher wattage power supply than PSU2
B. Hot spare feature is enabled in power supply configuration
C. PSU1 is always the primary power supply
D. UPS and PDU are not installed to balance the load
A server administrator needs to change the settings of their iDRAC utilizing just the front panel.
Which configuration would allow this?
A. LED Only
B. LED with Quick Sync 2
C. LCD Only
D. Both LCD and LED
An administrator sets up an In-Band management method to monitor their Dell EMC PowerEdge servers.
Which protocol uses In-Band management for basic communication and messaging?
A. SNMP
B. HTTP
C. SMTP
D. FTP
What are the different types of event logs on a Windows server operating system?
A. Healthy, Warning, and Important
B. Information, Non Critical, and Critical
C. Information, Warning, and Error
D. Healthy, Warning, and Critical
Which component determines the system board chipset?
A. SFP
B. HDD
C. M.2
D. CPU
What is an alternative configuration for a 40Gbps Ethernet connection?
A. 1x 25 Gbps
B. 1x 10 Gbps
C. 10x 4 Gbps
D. 4x 10 Gbps
What are characteristics of a UTP Ethernet cable?
A. High noise and lower costs
B. High noise and higher costs
C. Less susceptible to noise and higher costs
D. Less susceptible to noise and lower costs
What process divides the data into blocks across multiple disk drives?
A. Redundancy
B. Striping
C. Mirroring
D. Parity
A network administrator has to reconfigure the company firewall to allow access to a website on the internet.
Which technology will provide the administrator with the correct IP address?
A. ARP
B. DHCP
C. DNS
D. HTTP
DRAG DROP -
Match the management tool to its description.
Select and Place:
How can an administrator access a record of alerts in the iDRAC GUI?
A. System > Details
B. System > Overview
C. Maintenance > System Event Log
D. Troubleshooting > Lifecycle Log
What is the IP address "xxx.xxx.xxx.0" reserved for?
A. Unicast address
B. Network ID
C. Broadcast address
D. Network gateway
A customer created a RAID 6 volume using 4x 600GB disks. How much usable disk space is available?
A. 600GB
B. 1.2TB
C. 1.8TB
D. 2.4TB
A system administrator is installing Hyper-V on a Windows Server 2016. They receive an error message. How can they solve the problem?
A. Ensure minimum memory of 2 GB
B. Verify that the virtualization feature is enabled
C. Check the installed processor is x86
D. Confirm essentials license is installed
What server types offer more disk drives and expansion slots and are the most cost effective within the Dell portfolio?
A. Tower Servers
B. Nano Servers
C. Blade Servers
D. Rack Servers
DRAG DROP -
Order the DHCP address handshake steps.
Select and Place:
A customer looks for a storage solution to boot the hypervisor, where one is active and the other standby.
Which solution will allow the requirement?
A. BIOS
B. IDSDM
C. BOSS
D. UEFI
An MX7000 was purchased with minimal configuration.

What can an administrator add to make the MX7000 management interface fully redundant?
A. CMC module
B. MX9116n module
C. MX9002m module
D. Enterprise license
Which is an example of Host Channel Adapter?
A. GPGPU PCIe card
B. PERC in PCIe adapter form factor with external connectors
C. InfiniBand PCI card
D. An adapter that combines functionality of Ethernet and FC
A server administrator wants to transfer files between a workstation and a server. It needs to be as simple as possible, without concern for
security or advanced functionality.
Which is the optimal protocol to choose?
A. HTTP
B. SFTP
C. SMTP
D. TFTP
What items must be included when compiling server documentation?
A. Inventory, network map, and firmware list
B. Firmware list, driver list, and service tags
C. Vendor list, network map, and action log
D. Network map, inventory, and action log
A user is reporting problems with a service on a Windows server.

Where can the information about the service be found in the Event Viewer?
A. Windows Log > System
B. Windows Log > Application
C. Service Log > Events
D. Application and Services Logs
Which network operating system is capable of supporting various workloads, such as database and printer access, and is based on open source
code?
A. Windows
B. Linux
C. ESXi
D. Oracle
An IT architect is asked to provide a Dell EMC modular infrastructure that offers the most powerful and scalable computing capabilities and works
with virtually any network, storage, or management infrastructure.
Which product should they choose?
A. FX2
B. VRTX
C. FC640
D. MX7000
A system administrator has deployed Windows Server 2016. They want to run the Best Practices Analyzer to check for any issues. How would they
access this tool?
A. OpenManage Server Administrator
B. Resource Monitor
C. SupportAssist Enterprise
D. Server Manager
An administrator has been tasked with installing a server with greater than 2TB partition.
Which boot mode would allow this?
A. BIOS
B. GUID
C. UEFI
D. GRUB
Where can a system administrator check and change power supply redundancy options on a Dell EMC PowerEdge server?
A. Dell Power Manager interface
B. UEFI BIOS
C. iDRAC GUI
D. PXE web interface
Which server component is shown?
A. rNDC
B. bNDC
C. PERC
D. NVDIMM battery
Where are the system settings of a Dell EMC PowerEdge server stored?
A. UEFI
B. vFlash
C. BIOS
D. CMOS
DRAG DROP -
An administrator needs to configure RAID 1 in System Setup.
Place the sequence in the correct order.
Select and Place:
An administrator needs to know which IP address corresponds to a MAC address.

Which protocol will support this?
A. STP
B. DHCP
C. ARP
D. DNS
DRAG DROP -
A server administrator needs to configure a static IP for the iDRAC on their server.
What is the correct sequence to accomplish this through the LCD?
Select and Place:
DRAG DROP -
A system administrator needs to configure their Dell EMC PowerEdge server for PXE boot in UEFI mode.
What is the correct order of steps to accomplish this?
Select and Place:
A customer requires an external storage for their Dell EMC PowerEdge server which allows them to efficiently share files between systems.
What type of storage will meet the requirement?
A. NAS
B. DAS
C. SDS
D. SAN
A Windows administrator needs to configure automatic updates of the Operating System in 10 PowerEdge servers. Which tool should they use to
achieve this?
A. OME
B. LCC
C. iDRAC
D. WSUS
DRAG DROP -
What is the correct sequence when deploying the operating systems by directly booting from media?
Select and Place:
The system board was just replaced on a Dell EMC PowerEdge 13G Server, and the technician needs to restore the saved configurations.
Where is the configuration stored and returned to the system profile?
A. Control Panel
B. vFlash SD
C. BOSS Card
D. IDSDM
A system administrator is securing the company's servers. They want to use a security technology that authenticates the host system hardware.
Which technology is used for this security requirement?
A. Trusted Platform Module
B. RSA SecureID Authentication
C. Boot Guard
D. System Lookdown Mode
Which key is used to access the one-time boot menu when preparing a Dell EMC PowerEdge server?
A. F2
B. F10
C. F11
D. F12
What is this system referred to?
A. HAC
B. FANS
C. CRAH
D. HVAC
In which scenario is an offsite tape backup system recommended?
A. Cold storage
B. Disaster recovery
C. Disk to tape copying
D. Individual file recoveries
A server administrator needs to monitor a Dell EMC PowerEdge server without installing any additional software. Which management tool is the
most appropriate to use?
A. OME
B. SAE
C. iDRAC
D. OMSA
An administrator wishes to create a complex RAID set for a high-performance database, where the value of the data far exceeds the cost of the
drives.
Which complex RAID level should be used?
A. RAID 1
B. RAID 10
C. RAID 50
D. RAID 60
What color tab indicates that hot swap can be performed on a component?
A. Black Tab
B. Red Tab
C. Blue Tab
D. Orange Tab
A PowerEdge 14G server administrator has to shut down a server for urgent intervention. They don't want to risk any data loss but don't know the
OS password.
What steps should be taken?
A. Connect to Lifecycle Controller > Server management > Send OS shutdown command
B. Connect to iDRAC > Dashboard tab > click Graceful Shutdown
C. Connect to iDRAC > Dashboard tab > click Power Off System in the dropdown menu
D. Connect to Lifecycle Controller > Server management > Power Off System
A customer requires a solution that allows data in RAM to be retained in case of power loss.
Which technology should be used?
A. NVDIMM
B. DDR DIMM
C. NVMe
D. SDRAM
A company is planning a physical security solution for its branches worldwide.

Which danger are they trying to avoid?
A. Buffer Overflow
B. Ransomware
C. Phishing
D. Asset vandalism
Which solution is used as a one-to-one systems management?
A. OMSA
B. OME-M
C. SAE
D. OME
An administrator needs to set up a RAID which requires high performance but no data protection.
Which RAID level fulfills these requirements?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
An administrator wants to enable Lifecycle Controller log replication into the operating system.
Which tool can accomplish this?
A. SAE
B. OME
C. PERC CLI
D. iSM
How does GPGPU compare to CPU in a Dell EMC PowerEdge server?
A. GPGPU is somewhat limited on running instructions concurrently, and CPU simultaneously executes a single instruction stream on multiple
data elements
B. GPGPU is only used for video output in servers, and CPU is used for computational power
C. GPGPU has no memory on its own and fully relies on RAM, but CPU memory resource is reduced by 20GB per installed GPGPU
D. GPGPU simultaneously executes a single instruction stream on multiple data elements, and CPU is somewhat limited on running
instructions concurrently
Which technology should a customer choose to directly connect an external storage array?
A. FICON
B. FCoE
C. ESCON
D. SAS
An administrative user sends a Word document as an attachment to their coworker using the email client.
Which protocol is used to complete this transaction?
A. SMTP
B. SNMP
C. SFTP
D. SCTP
A customer is doing the following types of compute.
Compute-intensive applications -
Machine learning and Artificial Intelligence
Data Analytics -
Which type of server can fulfill these requirements in a reasonable time frame?
A. Tower Servers
B. Nano Servers
C. Accelerated Servers
D. Data Center Scalable Servers
A customer needs to implement a vSwitch that will allow communication between certain virtual machines (VMs). The traffic must be segmented
to the VMs and separated from the host.
Which type of vSwitch meets their needs?
A. External switch
B. Internal switch
C. Private switch
D. Restricted switch
A network administrator needs to size an IP subnet to address his 60,000 clients.

Which subnet will fulfill the requirement without using unnecessary IP addresses?
A. /8
B. /16
C. /24
D. /32
A server administrator is deploying Windows 2016 Hyper-V. The virtual machines within the infrastructure will be communicating with each other.
They will also be communicating with other network services and legacy systems that are hosted on a physical server.
What is the virtual switch that must be configured to support this deployment?
A. Private switch
B. Distributed switch
C. External switch
D. Internal switch

DEA-41T1 Exam - Free Actual Q&As, Page 1 - ExamTopics

Uploaded by

Copyright:

Available Formats

DEA-41T1 Exam - Free Actual Q&As, Page 1 - ExamTopics

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DEA-41T1 Exam - Free Actual Q&As, Page 1 - ExamTopics

Uploaded by

Copyright:

Available Formats

7/25/22, 2:54 PM DEA-41T1 Exam – Free Actual Q&As, Page 1 | ExamTopics

- Expert Verified, Online, Free.

 Custom View Settings

Topic 1 - Single Topic

A. Run OpenManage Essentials

B. Check rear lights on the server chassis

C. Run Repository manager

D. Check iDRAC Post Code

What advantage do NVDIMMs have over other server-based memory technologies?

A. Operate at lower voltages to save on power costs.

B. Lower cost per GB of capacity

C. Require less cooling than traditional memory DIMMs

D. Can retain contents even after a power loss

What is an accurate statement in reference to software RAID?

A. Software RAID does not have any data integrity issues

B. Software RAID requires a hardware license

C. Software RAID is an additional cost

D. Software RAID uses CPU resources

A. Observe load requirements specified in documentation for the switch.

B. Avoid unevenly loading the rack and creating a hazard.

C. Ensure that the server can connect to Windows updates

A. Windows Event Logs

B. Raid Controller Logs

D. System Event Logs

A. USB, Ethernet, SSD, and CSI

B. SAS, USB, Ethernet, and SSID

C. SSID, CSI, USB, and SAS

D. Ethernet, SSID, CSI, and SAS

What is the Dell EMC iSM?

B. Program that is installed and provides one-to-one systems management functionality

D. Out-of-band management platform on Dell EMC servers

Question #10 Topic 1

Which protocol resolves IP addresses into MAC addresses?

Question #11 Topic 1

A. Comprehensive, one-to-one systems management solution for remote or local servers

B. Management console for one-to-many monitoring of Dell EMC infrastructure

C. Operation of hardware while iDRAC is non-functional

D. Management and integration of operating system updates across an entire environment

Question #12 Topic 1

What occurs during the Data Wiping process?

A. Destroys CDs and DVDs by pulverizing and cross-cut shredding

D. Logically connects storage media to a bulk-wiping device

Question #13 Topic 1

Question #14 Topic 1

What is the purpose of the DNS role?

A. Send out emails from a server to a client

B. Translate domain names into IP address

C. transfer computer files between a client and a server

D. Distribute and update dynamic IP address

Question #15 Topic 1

What does well organized documentation help a system administrator improve?

A. Cost of running a server

B. Visibility of a system during an audit.

D. Recovery time in the event of a failure

Question #16 Topic 1

A. Provides thermal management of the supply

B. Reverses airflow to meet data center requirements

C. Throttles output to power-heavy components

D. Ability to update firmware without the need for downtime