1100 Series

1104D-E44TA
106 kW / 142 bhp at 2200 rpm

Powered by Your Needs

The 1100D range offers the possibility to move between different fuel system
technologies and aspirations.

The 1104D electronic range provides, turbocharged or turbo charge-cooled
aspiration options at Tier 3..

State of the Art Design

The electronic control system incorporates proven components of Caterpillar®
ACERTTM Technology.

Increase in power, lower fuel consumption and a minimal rise in heat rejection.

Component Commonality

Shared front and rear ends and ‘repeated’ components - pistons, con rods and
valve gear.

Rationalised inventory, streamlined training and consistent serviceability.

Reduced Noise

Noise minimised at source - engine sound levels have been reduced by up to
With the success of their 1100 Series, 1 dBA.
single platform engines, Perkins have
Reduction in noise suppression costs.
taken development further with the
introduction of the new 1100D range. Lower Installation Costs

Virtually identical hook-up points and envelope size as the 1104C model.


The 1100D range is the ultimate
Customer enjoys a seamless transition during the emissions changeover process.
power solution and available with
mechanical or electronic control. All
electronically controlled models in this
Lower Operating Costs

Service intervals are 500 hours standard.
range now incorporate proven

Perkins comprehensive warranty cover for two years (up to 3,000 hours). With
components of Caterpillar ACERT
Technology. three years on major engine components.

Low usage warranty package is also available.
The 1100D range with their wide
choice of build options, plus all the Product Support
features and benefits, present a
Through an experienced network of distributors and dealers, fully trained engine
secure future for all our customers at experts deliver total service support around the clock, 365 days a year. Service
Tier 3/Stage IIIA emissions legislation; points around the world have a comprehensive suite of web based tools covering
and is the platform on which the technical information, parts identification and ordering systems, all dedicated to
long-term solution to Tier 4/Stage IIIB maximising the productivity of your engine.
legislation will be built.
Throughout the entire life of a Perkins engine, we provide access to genuine OE
specification parts giving 100% reassurance that you receive the very best in
terms of quality for lowest possible cost... wherever your Perkins powered
machine is operating in the world.

Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (US) standards.
Stage IIIA refers to European standards.

Performance Data Gross Intermittent (ISO 14396) Speed (rev/min)

Power Output (kW) 106 2200

Power Output (bhp) 142 2200
Peak Torque (Nm) 556 1400
Peak Torque (lbf ft) 410 1400

The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1
Derating may be required for conditions outside these; consult Perkins Engines Company Limited
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No. 1838/01/08 Produced in England ©2006 Perkins Engines Company Limited
1100 Series
1104D-E44TA
Engine Specification 670 mm 626 mm

Engine ratings

SAE A or SAE B PTO drive

Timing case and gear driven auxiliaries

Flywheel housings

Flywheel and starter rings

Oil filter positions

Adapter plates

Starter motors

Fan drives and locations 823 mm

Lubricating oil filters and breathers

Front-end drives

Alternators

Belt driven auxiliaries

Induction manifolds


600

Exhaust manifolds 580

556.0

560

Fuel filter positions 540

Torque (Nm)


520

Cold start aids 500

480
E
Engine mountings 460

440

Cooling packs 420

400

Air compressor 380

360 120
106.2 110
100
90
80

Power (Kw)
70
60
50
40
30

General Data 20

Number of cylinders 4 vertical in-line 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200

Engine Speed (rev/min)

Bore and stroke 105 mm x 127 mm Performance with fuel oil at 40˚C at pump inlet

Displacement 4.4 litres

Aspiration Turbocharged (air-to-air charge cooled)
Note: lower speed ratings cannot be read off this curve
Cycle 4 stroke
Combustion system Direct injection
Compression ratio 16.2:1
Rotation Anti-clockwise, viewed on flywheel
Cooling system Liquid
Dimensions Length 631 mm
Width 646.7 mm
Height 777.7 mm
Dry weight 360 kg

Final weight and dimensions will depend on completed specification.

Perkins Engines Company Limited

Peterborough PE1 5NA Distributed by
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com

All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1838/01/08 Produced in England ©2006 Perkins Engines Company Limited