Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    MANUAL HD Modulator Single DVB-T EN

    Uploaded by

    Sil_Sir

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MANUAL HD Modulator Single DVB-T EN

    Uploaded by

    Sil_Sir
    11 views14 pages

    Original Title

    MANUAL_HD_Modulator_single_DVB-T_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views14 pages

    MANUAL HD Modulator Single DVB-T EN

    Uploaded by

    Sil_Sir

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 14

    HD Modulator

    single DVB-T

    User Manual
    CONTENTS Page

    1. REAR PANEL 3
    2. CONNECTING YOUR SYSTEΜ 4
    3. FRONT PANEL BUTTONS 4
    4. OPERATING INSTRUCTIONS 5
    4.1 PARAMETERS SETUP 5
    5. SPECIFICATIONS 9

    The CE certificate of the product is available on our webpage, by visiting this link:
    https://www.edision.gr/en/support
    1. Rear Panel

    1.RF OUT: RF output terminal. For mix with RF IN signal.


    2.RF IN : connection of IN signal.
    3.LTE switch: To switch 4G LTE signal Filter ON/OFF. “ON” > LTE signal is
    filtered. “OFF” > LTE signal NOT filtered.
    4.USB : USB 2.0 , connect to USB for software upgrade or configuration data
    backup.
    5.HD: HD Input signal.
    6.DC 12V: For connection of an external 12V adapter.

    3
    2. Connection

    HD Signal source IN to Modulator.


    Modulated RF output.

    3. Front panel
    

    1. LOCK: (DOUBLE USE BUTTON): 1. locks the use of the buttons. “LOCK” led
    lights up when pressed 1 time for locking. To release lock state, press again.
    2.also functions as “Delete”(Space) button while editing menu “Name”.

    4
    2. MENU/OK: One time press: “MENU” button.
    Two times press: “Confirm” button.
    3. « » Left : backward selection.
    4. « » Right: forward selection.
    5. « » Down: list down selection.
    6. « » Up: list up selection.

    4. Operating instructions

    4.1 Parameters Setup


    4.1.1 Output channel Setup
    Press “MENU/OK” button and the OLED display displays “Freq/CH_xx”. Press
    “ “Up or “ “Down button to select the desired output channel. If you do not
    want to setup other parameters, press “MENU/OK” button and on the display
    appears “Save config? Yes(*) No( ). Press “MENU/OK” again to save the setting. If
    you want to setup other parameters also, please do not press this button. For more
    setup options, press “ “(Left) or “ “ (Right) button to select other parameters.
    When all your settings are complete, press “MENU/OK” button two times to save
    the settings .

    5
    4.1.2 Setup Cons(tellation), FEC, FFT, Guard Interval, RF Level, Audio Bit
    Rate. Audio Format.
    Press the“MENU/OK” button. Then use “ “(Left) or “ “(Right) button to
    select the desired setup item. Use “ “(UP) or “ “(DOWN) button to set the
    correct value. Press “MENU/OK” button two times to complete and save the setup.

    4.1.3 Output program “Name” Setup


    Press “MENU/OK” button. Then use “ “(Left) or “ “(Right) button to select
    “Name” option. Press “ “(UP) and first character on left side will flicker. You can
    use “ “(Left) or “ “(Right) button to change the character. To stop editing,
    press “ “(UP) button Or press “ “(DOWN) button to edit another character.
    Use “LOCK” button to delete the flickering character. ‘LOCK’ button also functions
    as “Space” button. To end editing, press “MENU/OK” button two times and save
    the “Name” field that you edited. To select other parameters, press “ “(UP)
    button to end “Name” editing function and use “ “(Left) or “ “(Right) button
    to choose other programming options.

    6
    4.1.4 LCN Setup, Network Name, Audio pid, Video pid, Pmt pid, Program
    num. Video Bit rate.
    Press “MENU/OK” button. To select the desired option press “ “(Left) or
    “ “(Right). For example, edit LCN: Press “ “(UP) button. then left side first
    character flickering. To change the number, use “ “(Left) or “ “(Right)
    button. To select next number to be edited, press “ “(DOWN) button. To end
    editing, press “ “(UP) button. To edit another item, press “ “(Left) or “
    “(Right) button. Press “MENU/OK” button two [2] times to save configuration.

    4.1.5 Turn off OLED display


    Press ”MENU/OK” button to enter setup. Use “ “(Left) or “ “(Right) button
    to select “Led off?” option. Press “ “ (UP) button” to turn off the oled display.
    Press “MENU/OK” button again to activate the oled display again.

    4.1.6 Reset to Factory default values


    Press ”MENU/OK” button to enter setup. Use “ “ (Left) or “ “ (Right) button
    to select “Factory reset“ to default values. Press “ “(UP) button” to start reset
    to factory default values. The display will appear “Success!” when the procedure
    is completed.

    7
    4.1.7 Save configuration to USB.
    Press ”MENU/OK” button to enter setup menu. Use “ “(Left) or “ “(Right)
    button to select “Save to usb” option. Press “ “(UP) button” to start saving
    process and then the display will appear “Success!” when the procedure is
    completed.

    4.1.7 How to upgrade software


    1: Copy the “jedi.img” file to the USB device.
    2: POWER OFF the modulator.
    3: Plug the usb device into USB port on the back of the device.
    4: POWER ON the modulator.
    5: When on the OLED display appears “Upgrade Yes(*) No( )”, press “MENU/OK”
    button to start upgrade process.

    Upgrade procedure will finish after 10 seconds approximately.


    WARNING! DO NOT power off the modulator while upgrading!! Damage to the
    device may occur !

    If you do not want to upgrade software, press “ “(DOWN) button to select “No
    (*)” and then press “MENU/OK” button to end upgrade submenu.
    8
    5. Specification of Hardware
    Class Sub class Designation Expected Features
    Host CPU: 200MHZ 32Bits RISC
    Processor Processor Security Processor :200Mhz
    frequency 32Bits
    Audio Processor:200MHZ 32Bits
    RAM DDRII 16bit 512Mbitsx1
    Memory (Embedded)
    Flash NOR Flash 32Mbit x 1
    ISO/IEC 11172-2 MPEG1
    ISO/IEC 13818-2 MPEG2
    MP@HL
    Encoder ISO/IEC 14496 MPEG4
    Video encoder compliant Support SP@L3 to
    ASP@L5
    ISO/IEC 14496-10 AVC,
    Video HP@level 4.1, MP@level 4.1
    H.264 profile 0
    JPEG base-line, progressive
    Aspect Ratio 16:9 wide screen, 4:3 letter box,
    4:3 pan scan, support AFD(DTG,
    MingDTG)
    Resolution 1080i,up to 1080p@30FPS

    MPEGI layer1/2, MPEGII


    Audio Audio encoder Layer II
    AAC LC, HE-AAC v1/V2 (2-
    9 CH)
    174~233MHZ(VHF III) ,470 -
    Resolution 1080i,up to 1080p@30FPS

    MPEGI layer1/2, MPEGII


    Audio Audio encoder Layer II
    AAC LC, HE-AAC v1/V2 (2-
    CH)

    Output frequency range 174~233MHZ(VHF III) ,470 -


    858 [MHz](UHF)
    Output impedance 50 [ ]
    Input impedance (Loop to 50 [ ]
    Output)
    Forward Error Correction 1/2,2/3,3/4, 5/6, 7/8
    (FEC)

    Guard Interval 1/4,1/8,1/16,1/32

    Modulati Constellations QPSK,16QAM,64QAM


    on Default: 90 dBμV
    RF Output Level Αdjustable: 0 to -14 dB
    0 to + 6 dB

    Band Wide 7MHZ(VHF),8MHZ(UHF)

    FFT 2K,8K

    Reed Solomon 202,188,T=8

    Symb l rate range up to 31.668 MBPS

    MER More than 35dB at Maximum


    RF Level output
    RF Input (LOOP to Output) Impedence:50 Ohm
    10 Input type: F-type female
    RF Output Impedence:50 Ohm
    MER More than 35dB at Maximum
    RF Level output
    RF Input (LOOP to Output) Impedence:50 Ohm
    Input type: F-type female
    RF Output Impedence:50 Ohm
    Output type: F-type female
    USB Connector (software Number: 1
    upgrade)
    LTE(Long Term ON/OFF
    Evolution)Filtering switch Cut Off Frequency: 790MHZ
    Number: 1, High Definition
    Rear HD Input Media Interface HD
    Panel V1.4a

    USB Connector Number: 1


    Type: Host 2.0

    Power DC Input Connector X1 DC(12V, 2A)

    128x32 dots OLED Display


    Display Display (IIC or SPI communication
    protocal)
    LED Power & work state LED POWER/LOCKED/SIGNAL
    Indicator
    Front
    Panel
    Tact switch X6(UP/DOWN/ Set Output channel/FEC/
    LEFT/RIGHT,MENU/ CONSTELLATION/FFT/
    Buttons
    OK,LOCK Channel Name etc.

    Power supply unit type Adapter Input:100~240V


    11 AC,Output:DC 12V/2.0A
    Power
    Power consumption in
    Buttons
    OK,LOCK Channel Name etc.

    Power supply unit type Adapter Input:100~240V


    AC,Output:DC 12V/2.0A
    Power
    Supply Power consumption in
    normal working mode < 10W

    Demensi 164(W)X104(D)X41(H)mm
    Mechani on
    cal Design
    Material Metal cabinet and 2 layers With enough heat radiation
    and
    structure
    PCB structure holes on cabinet

    12
    For information about EDISION Hardware or Software matters, please
    contact support@edision.gr
    w w w. e d i s i o n . g r

    EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RISIO • THESSALONIKI - GREECE

    You might also like