CHIMEI INNOLUX DISPLAY

CORPORATION
LCD MODULE
S P E C I F I C AT I O N

Customer:
Model Name: Q101IRE-LA1
Date: 2013/09/06
Version: 1.0

□Preliminary Specification
■ Final Specification

For Customer ’s Acceptance

Approved by Comment

Approved by Reviewed by Prepared by

鄭國偉 袁凌霄 夏彩梅

 InnoLux copyright 2004
All rights reserved,
Copying forbidden.

Record of Revision
Version Revise Date Page Content
Pre-Spec.01 2012/11/16 Initial Release
Spec.02 2012/6/5 Update LCM and package drawing
Spec 1.0 2013/09/06 update Mechanical Drawing
CHIMEI INNOLUX
Contents
1. General Specifications ............................................................................................................ 1
2. Pin Assignment ....................................................................................................................... 2
3. Operation Specifications ......................................................................................................... 4
3.1. Absolute Maximum Ratings ............................................................................................ 4
3.2. Typical Operation Conditions.......................................................................................... 5
3.3. Power Sequence ............................................................................................................6
3.4. LVDS Signal Timing Characteristics ............................................................................... 7
3.4.1. AC Electrical Characteristics .................................................................................. 7
3.4.2. Timing Table ........................................................................................................... 8
3.4.3. LVDS Data Input Format......................................................................................... 9
4. Optical Specifications............................................................................................................ 10
5. Reliability Test Items ............................................................................................................. 14
6. General Precautions ............................................................................................................. 15
6.1. Safety ........................................................................................................................... 15
6.2. Handling ....................................................................................................................... 15
6.3. Static Electricity ............................................................................................................ 15
6.4. Storage ......................................................................................................................... 15
6.5. Cleaning ....................................................................................................................... 15
7. Mechanical Drawing ............................................................................................................. 16
8. Package Drawing.................................................................................................................. 17
8.1. Packaging Material Table............................................................................................... 17
8.2. Packaging Quantity........................................................................................................17
8.3. Packaging Drawing.........................................................................錯誤! 尚未定義書籤。
CHIMEI INNOLUX Date: 2012/11/16 Page:1/17

1. General Specifications

No. Item Specification Remark

1 LCD size 10.1 inch(Diagonal)

2 Driver element a-Si TFT active matrix

3 Resolution 1280 × 3(RGB) × 800

4 Display mode Normally Black, Transmissive

5 Dot pitch 0.0565(W) × 0.1695(H) mm

6 Active area 216.96(W) × 135.60(H) mm

7 Module size 228.6(W) ×149.2(H) ×2.6(MAX) mm Note 1

8 Surface treatment Hard-Coating

9 Color arrangement RGB-stripe

10 Interface Digital

11 Backlight power consumption 3.1W (Max) Note 2

12 Panel power consumption 1.15W (Max) Note 3

13 Weight 160g(Max)

Note 1: Refer to Mechanical Drawing.

Note 2: Including LED Driver power consumption.
Note 3: Including T-con Board power consumption
CHIMEI INNOLUX Date: 2012/11/16 Page:2/17

2. Pin Assignment
A 40pin connector MSAK24025P40 is used for the module electronics interface.

Pin No. Symbol I/O Function Remark

1 NC --- No connection
2 VDDIN P Power Supply, VDDIN=3.3V (Typ.)
3 VDDIN P Power Supply, VDDIN=3.3V (Typ.)
4 VDC P Power Supply, VDC =3.3V (Typ.)
5 NC --- No connection
6 CLK EDID I CLK for EDID function use
7 DATE EDID I CLK for EDID function use
8 Rin0- I LVDS Negative data signal(-)
R0-R5, G0
9 Rin0+ I LVDS Positive data signal(+)
10 GND P Ground
11 Rin1- I LVDS Negative data signal(-)
G1~G5, B0,B1
12 Rin1+ I LVDS Positive data signal(+)
13 GND P Ground
14 Rin2- I LVDS Negative data signal(-) B2-B5,HS,VS,
15 Rin2+ I LVDS Positive data signal(+) DE

16 GND P Ground
17 LVDS_CLK- I LVDS Negative CLK signal(-)
LVDS CLK
18 LVDS_CLK+ I LVDS Positive CLK signal(+)
19 GND P Ground
20 RIN3- I LVDS Negative data signal(-) R6, R7, G6, G7,
21 RIN3+ I LVDS Positive data signal(+) B6, B7

22 CE_EN I Color engine enable Note 1

23 NC --- No connection
24 NC --- No connection
25 GND P LED Ground
26 NC --- No connection
27 NC --- No connection
CHIMEI INNOLUX Date: 2012/11/16 Page:3/17
28 GND P Ground
29 NC --- No connection
30 NC --- No connection
31 LED_GND P LED Ground
32 LED_GND P LED Ground
33 LED_GND P LED Ground
34 NC --- No connection
35 LED_PWM I PWM Signal for LED dimming control Note 2
36 LED_EN I LED Enable Pin (+3V Input)
37 CABC_EN I CABC Enable Note 1
38 VLED --- LED Power Supply VLED=3.7V
39 VLED --- LED Power Supply VLED=3.7V
40 VLED --- LED Power Supply VLED=3.7V

I: input, O: output, P: Power

Note1: The setting of Color Enhance /CABC function are as follows.

Pin Enable Disable

Color_EN High Voltage Low Voltage or open
CABC_EN High Voltage Low Voltage or open

Note2: LED_PWM is used to adjust backlight brightness.

Luminance
Bright

Luminance
Dark

Duty (0%) Duty (100%)

CHIMEI INNOLUX Date: 2012/11/16 Page:4/17

3. Operation Specifications

3.1. Absolute Maximum Ratings

(Note 1)
Values
Item Symbol Unit Remark
Min. Max.
VSS=0V,
VDD -0.3 5.0 V
TA=25℃
Power voltage
VLED -0.3 5.0 V

Operation Temperature TOP -10 50 ℃

Storage Temperature TST -20 60 ℃

Note 1: The absolute maximum rating values of this product are not allowed to be exceeded
at any times. Should a module be used with any of the absolute maximum ratings
exceeded, the characteristics of the module may not be recovered, or in an extreme
case, the module may be permanently destroyed.
CHIMEI INNOLUX Date: 2012/11/16 Page:5/17
3.2. Typical Operation Conditions
(GND=0V, TA=25 oC)
Values
Item Symbol Unit Remark
Min. Typ. Max.

VDD - 3.3 - V
Power voltage
VLED 3.3 3.7 4.2 V

Input logic high voltage VIH 3.0 3.3 3.6 V

Input logic low voltage VIL 0 - 0.5 V

IVDD - 255 348 mA VDD=3.3V

Current for Driver
VLED=3.7V,
IVLED - 830 837 mA
Duty=100%
Backlight On 3.0 - 3.6 V
EN Control Level
Backlight Off 0 - 0.4 V

PWM High V
Level 3.0 - 3.6
PWM Control Level
PWM Low V
Level
0 - 0.4
PWM Control fPWM
Frequency 1K - 20K Hz
CHIMEI INNOLUX Date: 2012/11/16 Page:6/17
3.3. Power Sequence

a. Power on:

<10ms

VDD
<50ms

LVDS
Signal Normal signal

>200ms

LED_VCCS >10ms

LED_PWM
>10ms
LED_EN

b. Power off:

VDD
>0ms

LVDS
Signal Normal signal

>200ms
LED_VCCS

>10ms

LED_PWM
>10ms

LED_EN
 CHIMEI INNOLUX Date: 2012/11/16 Page:7/17
3.4. LVDS Signal Timing Characteristics
3.4.1. AC Electrical Characteristics

Parameter Symbol Values Unit Remark

Min. Typ. Max.
LVDS Differential input high
RxVTH - - +100 mV
Threshold voltage
RXVCM=1.2V
LVDS Differential input low
RxVTL -100 - - mV
Threshold voltage
LVDS Differential input common
RxVCM 0.7 - 1.6 V
mode voltage
LVDS Differential voltage |VID| 250 - 600 mV
CHIMEI INNOLUX Date: 2012/11/16 Page:8/17
3.4.2. Timing Table

Values
Item Symbol Unit Remark
Min. Typ. Max.

Frame rate
Clock Frequency 1/Tc 68.9 71.1 85 MHz
=60Hz

Horizontal display area tHD 1280 Tc

HS period time tH 1410 1440 2000 Tc

HS Width +Back Porch tHW+ tHBP
60 160 720 Tc
+Front Porch +tHFP
Vertical display area tVD 800 tH

VS period time tv 815 823 1024 tH

VS Width +Back Porch tvW+ tvBP
15 23 224 tH
+Front Porch +tvFP
CHIMEI INNOLUX Date: 2012/11/16 Page:9/17

3.4.3. LVDS Data Input Format

CHIMEI INNOLUX Date: 2012/11/16 Page:10/17

4. Optical Specifications

Values
Item Symbol Condition Unit Remark
Min. Typ. Max.

θL Φ=180°(9 o’clock) 75 80 -

θR Φ=0°(3 o’clock) 75 80 -
Viewing angle
degree Note 1
(CR≥ 10)
θT Φ=90°(12 o’clock) 75 80 -

θB Φ=270°(6 o’clock) 75 80 -

TON - 10 20 msec Note 3

Response time
TOFF - 15 30 msec Note 3
Note 2
Contrast ratio CR 600 800 - -
Note 4
WX Normal 0.28 0.31 0.34 - Note 2
=Φ=0°
Color chromaticity Note 5
WY 0.30 0.33 0.36 - Note 6

Luminance L 300 350 - cd/m² Note 6

Luminance
YU 70 75 - % Note 7
uniformity

Test Conditions:
1. VDD=3.3V, VLED=3.7V, the ambient temperature is 25℃.
2. The test systems refer to Note 2.
CHIMEI INNOLUX Date: 2012/11/16 Page:11/17
Note 1: Definition of viewing angle range

Normal line
θ=Φ=0°

Φ=90°
12 o’clock direction

θL
θT θR
θB

Φ=180° Φ=0°
Active Area

LCM

Fig. 4-1 Definition of viewing angle Φ=270°

Note 2: Definition of optical measurement system. 6 o’clock
The optical characteristics should be measured in dark room. After 30 minutes
operation, the optical properties are measured at the center point of the LCD
screen. (Viewing angle is measured by ELDIM-EZ contrast/Height :1.2mm,
Response time is measured by Photo detector TOPCON BM-7, other items are
measured by BM-5A/ Field of view: 1° /Height: 500mm.)

Photo detector Normal line

θ=Φ=0°

Φ=90°
12 o’clock direction
500mm

Φ=180° Φ=0°
Active Area

LCM

Φ=270°
6 o’clock direction

Fig. 4-2 Optical measurement system setup

CHIMEI INNOLUX Date: 2012/11/16 Page:12/17

Note 3: Definition of Response time

The response time is defined as the LCD optical switching time interval between
“White” state and “Black” state. Rise time (TON) is the time between photo detector
output intensity changed from 90% to 10%. And fall time (TOFF) is the time
between photo detector output intensity changed from 10% to 90%.

White (TFT OFF) Black (TFT ON) White (TFT OFF)

Photo detector output

100%
(Relative value)

90%

10%
0%
TON TOFF

Fig. 4-3 Definition of response time

Note 4: Definition of contrast ratio

Luminance measured when LCD on the " White" state
Contrast ratio (CR) =
Luminance measured when LCD on the " Black" state
The Luminance in the formula measured at center point of LCD.

Note 5: Definition of color chromaticity (CIE1931)

Color coordinates measured at center point of LCD.

Note 6: All input terminals LCD panel must be grounded while measuring the Average of 5
points of the panel. The LED driving condition is IL=240mA.
The average of 5 points luminance = ( L (1)+ L (2)+ L (3)+ L (4)+ L (5)) / 5
The points measured refers to Notes 7
CHIMEI INNOLUX Date: 2012/11/16 Page:13/17

Note 7: Definition of Luminance Uniformity

Measure the luminance of gray level 63 at 9 points
δW9p = {Minimum [L (1)+ L (6)+ L (7)+ L (8)+ L (9)+ L (10)+ L (11) +L (12) +L (13)] /
Maximum [L (1)+ L (6)+ L (7)+ L (8)+ L (9)+ L (10)+ L (11) +L (12) +L (13)]}*100%
10mm

6 7 8
H/4

2 3

X : Test Point
H/4

X=1 to 13
9 1 10
H
H/4

4 5
H/4

11 12 13

10mm 10mm
10mm

W/4 W/4 W/4 W/4

W
Active area
CHIMEI INNOLUX Date: 2012/11/16 Page:14/17

5. Reliability Test Items

(Note3)
Item Test Conditions Remark

High Temperature Storage Ta = 60℃ 240hrs Note 1，Note 4

Low Temperature Storage Ta = -20℃ 240hrs Note 1，Note 4

High Temperature Operation Ts = 50℃ 240hrs Note 2，Note 4

Low Temperature Operation Ta = -10℃ 240hrs Note 1，Note 4

Operate at High Temperature

+40℃, 90%RH 240hrs Note 4
and Humidity
-20℃/30 min ~ +60℃/30 min for a total 100
Thermal Shock cycles, Start with cold temperature and end Note 4
with high temperature.

ISTA-3A 1Hz~200Hz,Grms=0.53
Vibration Test
Half hours for direction of Z.

100G 6ms,±X, ±Y, ±Z 3 times for each

Mechanical Shock
direction

C=150pF,R=300Ω,8point/Panel
Contact:± 4KV, 5times, Human Body Mode
Electro Static Discharge
Air : ± 8KV, 5times, Human Body Mode
(Environment :15℃~35℃,30%~60%)

Note 1: Ta is the ambient temperature of samples.

Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the
display function. After the reliability test, the product only guarantees operation,
but don’t guarantee all of the cosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time,
at least 2 hours at room temperature.
CHIMEI INNOLUX Date: 2012/11/16 Page:15/17

6. General Precautions
6.1. Safety

Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your
skin or clothes, wash it off immediately by using soap and water.

6.2. Handling

1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to
excessive force on its surface.
2. The polarizer attached to the display is easily damaged. Please handle it carefully
to avoid scratch or other damages.
3. To avoid contamination on the display surface, do not touch the module surface
with bare hands.
4. Keep a space so that the LCD panels do not touch other components.
5. Put cover board such as acrylic board on the surface of LCD panel to protect panel
from damages.
6. Transparent electrodes may be disconnected if you use the LCD panel under
environmental conditions where the condensation of dew occurs.
7. Do not leave module in direct sunlight to avoid malfunction of the ICs.

6.3. Static Electricity

1. Be sure to ground module before turning on power or operating module.

2. Do not apply voltage which exceeds the absolute maximum rating value.

6.4. Storage

1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less.
2. Do not store the module in surroundings containing organic solvent or corrosive
gas.
3. Store the module in an anti-electrostatic container or bag.

6.5. Cleaning

1. Do not wipe the polarizer with dry cloth. It might cause scratch.
2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might
permanent damage to the polarizer.
CHIMEI INNOLUX Date: 2012/11/16 Page:16/17

7. Mechanical Drawing
 CHIMEI INNOLUX Date: 2012/11/16 Page:17/17

8. Package Drawing

8.1 Packaging Material Table

Unit
Model Quantit
No. Item Dimensions(mm) Weight Remark
(Material) y
(kg)
1 LCM Module HJ101IA-01I 228.6 X149.2X 2.6 0.1445 40pcs
BC Corrugated
2 Partition 512 X 349 X 226 1.25 1set
paper
3 PET Tray PET 511 X 342X14.6 0.21 21pcs
Dust-Proof PE 700 X 530 0.060 1pcs
4
Bag
Corrugated
5 Carton 530 X 355 X 255 1.10 1pcs
pape r
6 Total weight 12.6 Kg± 5%

8.2 Packaging Quantity

Total LCM quantity in Carton: 2pcs/Tray X 20 Trays/Carton = 40pcs
CHIMEI INNOLUX Date: 2012/11/16 Page:18/17

8. Packaging Drawing