BUTTON ILLUSTRATION CONNECTION METHOD WITH PS4 CONNECTING TO IOS/ANDROID DEVICES WIRED CONNECTION XINPUT MODE AND DINPUT

METHOD WITH PS4 CONNECTING TO IOS/ANDROID DEVICES WIRED CONNECTION XINPUT MODE AND DINPUT MODE SELECTION TURBO MODE FUNCTIONS MACRO SETTING EXAMPLE FOR N1 PRODUCT SPECIFICATIONS
For PS4 / PS3 / IOS / Android / PC
① After the PS4 host is powered on, connect the controller to the PS4 host using a USB data cable ① Mode selection is same as the the original PS4 controller. The light indication is the same as the Pressing TURBO multiple times produces different effects. ① Hold down the N1 key combined with the SET key for 2 seconds until indicator light starts 1. Size :L162*W103*H65mm 2. Weight: 221g
Indicator light PS4 wired connection. (Following are setting examples using LT) flashing slowly,indicating that the the controller is in recording state.
3. Input voltage/current :DC5V / 500mA 4. Working voltage/current: DC3.7V / 80mA
SET

PS4 GAMEPAD
SHARE OPTIONS

Indicator
+
5. Maximum operating current: 200mA 6. Continuous use time :8 hours
2s Start programming
Touch pad
N1
light
＋
Supprted Keys: D-pad (up, down, left, right)/ □ / △ / ◯ / ✖ / LT / LB / RT / RB
LB RB ＋ 3s When searching, 3 Seconds 7. Charging time: about 3 hours 8. Bluetooth range ≤8m
9. Battery capacity :1200mah 10. Charge Retention: 30 days
OPTIONS/+
SHARE OPTIONS
lights start flashing
OPERATING INSTRUCTIONS SHARE/— Press SHARE and OPTIONS SETTING METHOD (2) Start recording key presses. After finishing macro recording press N1 to assign recorded
SHARE OPTIONS
Press and hold SHARE and Home 3 seconds to toggle Dinput mode
Button macro to N1 button. Indicator light will stop flashing showing successful macro assignment.
Dinput mode
button for 3 seconds to start pairing Default Xinput mode
D-pad RGB Indicatior COMMON INCONVENIENCES AND SOLUTIONS
HOME
Semi-auto Press and hold DOWN，RIGHT，UP，✖
② Success
the button that Hit Turbo once
N1
Model 1.When connecting via Bluetooth device name may not be displayed properly instead Bluetooth
Right 3D & requires Turbo
Left 3D & MAC address (44-45-53-54-00-00, etc.) may be displayed. Select the MAC addressand pair. (If
Downward R3 In IOS/Android Bluetooth menu,select "Wireless Controller"from the available Bluetooth devices
Downward L3 ② Press the HOME button, Front LED indicator will start to flash, when connection is successful the
RGB Indicatior nothing is displayed restart the Bluetooth and try again. Sometimes you may need to reboot
light will stop flashing. Green light Blue light your phone.)
successful 2. When connecting to the Switch console with a cable, controls for one of the sides of Switch
SHARE OPTIONS
Speaker connection Full Auto Press and hold Press the
Turbo key a
MACRO CLEARING EXAMPLE FOR N1 may not be be registered if the cable miss-oriented..
Indicator light stays MOTOR VIBRATION ADJUSTMENT Mode the button that
TURBO ③ After successful connection you can unplug the USB cable and continue using your controller requires Turbo second time 3. When devices of the same model were previously used and saved on a Bluetooth host, future
Wireless Controller
on after the 1. Follow the step ① as above for recording macros.
wireless. 4 grades of strength: 0%-30%-70%- 100%; The default is 70%. Following below adjustment 2. Without recording any buttons directly press N1.Any macros assigned to N1 will be deleted pairings may fail due to the conflicting device information saved on Bluetooth host. Delete pairing
successful pairing
methods indicator light blinks 3 times (4HZ) for each operation set indicating that the setting is Note: Recorded macros are retained after restart. history of the host device to establish a fresh connection.
successful.
SINGLE PRESS THE HOME BUTTON:
Clear the Turbo Press and hold the Press the WARNINGS
Left
T + Stronger ↑ TURBO
① : Return to the console home screen. key + left joystick up to function of the button that requires Turbo key a
Type-C port increase vibration strengthen button Turbo button third time LED COLOR ADJUSTMENT: 1. Do not place the controller under direct sunlight
② : Press the HOME button twice to switch the application in launching.

9 single color breathing light modes and automatic color changing breathing
2. Do not place the controller in water
③ : While console is in sleep mode pressing HOME button can wake up the console and the controller.
RT LT
light modes are available. Available colors:
3. Do not put heavy weight on the controller
CONNECTING TO PS3/PC 4. Avoid liquid or small particles infiltration
LONG PRESS THE HOME BUTTON:
+
T +
T
Hold Turbo for
Clear Turbo
(blue - cyan blue - purple - yellow - red - orange - yellow - green - white)
TURBO key + left joystick down to
Smartphone holder
for Android / ios Connect the PS3/PC host via USB data cable. Left Weaker ↓ decrease vibration strength function for
more than
3 seconds
5. Do not twist or pull the joysticks
① : to close the currently running application. Channel light
all keys
Press “set” key to switch between modes, press and hold set key for 3
slow flashing (2HZ)
② : to log out/power off your PS4 host.
seconds to turn off LED lights (except the indicator light). Color settings are RESETTING BACK TO THE FACTORY SETTINGS
saved for next restart.
③ : to acces console operation menu for currently running application.
N1 N2 Note: Macro keys can support TURBO's semi-automatic mode and fully automatic mode, but Macro While controller is ON, use a small pin or needle to reach the hidden “Reset” button on back of the
CONTROLLER SHARE/OPTIONS KEYS SHARE OPTIONS
TURBO SPEED ADJUSTMENT keys do not support speed adjustment, macro keys can only loop recorded macro at recorded speed. controller and gently press it.

On PS4: gamepad SHARE key:PS4 Share button, OPTIONS key: PS4 Options button.

T +
Set Reset Right
On PS3: gamepadSHARE key : PS3 Select button,OPTIONS key: PS3 Start button Hold down the Turbo key, push the right Joystick up to the
Wired headset maximum to increase, and push the right Joystick down INSTRUCTIONS FOR PROGRAMMING MACRO KEYS PACKAGE CONTENTS
Website：www.qrdgame.com to the maximum to decrease. The indicator light flashes
Contact : support@qrdgame.com 3 times (4HZ) for each setting Macro buttons are located at rear as: N1, N2 buttons
CONTROLLER STATUS LIGHT DESCRIPTION
SHARE OPTIONS

Supported buttons: □ / △ / ◯ / ✖,LB RB,LT RT, D-pad UP/DOWN/LEFT/RIGHT,left joystick,

1. The gamepad is plug and play no driver installation is required.You can play PC/Steam games There are 3 speed options; 1: 8times/SEC, 2:15times/SEC, right joystick,(joystick 8 directions only)L3, R. Up to 24 key of exact player inputs an timing can be
without any additional software.

T +
Upon pressing the HOME button, the host automatically configures each controller,PS4 host allows a 3:25times/SEC recorded.
maximum of 4controller can be connected at the same time,Player number is assigned by the host 2. PC: Connect the handle to the USB port of PC through USB data cable. In wired mode the game To record a macro press and hold “set” key on the back and N1 or N2 buttons until indicator starts
machine, controller indicator light changes for each player as the following; pad is registered as PC360 controller and indicator light is green. Macro button does not support speed adjustment, the default Right flashing. Release buttons and enter desired macro inputs. Press N1 or N2 to map the macro to one
wireless Touch pad Long Multiple Ergonomic 1P: Blue 2P: Red 3P: Green 4P: Pink speed is 2nd gear TURBO settings are not saved upon shutdown of the macro buttons. 6125 controller x1 Operating instruction x1 Type-C cable x1
PLEASE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USE connections service life vibration function Indicator LED turned off means either controller/console is OFF or in sleep mode