Facestock

A gloss white polyester film. The smooth surface is covered with

AJ059
a topcoat for very good ink anchorage.
Basis Weight 76 g/m² ISO 536 Fasson ®
Caliper 50 µm ISO 534
Adhesive TRANSFER PET WHITE TOP
S8049 is a rubber hybridised acrylic (RHA) adhesive. S8049-BG42WH BSS FSC
Liner
BG42Wh BSS: on both sides siliconized glassine paper,
woodfree, super calandered and extremely tough and tear-
restistent despite its thinness.
The liner is made from FSC® certified paper (FSC Mix Credit,
chain-of-custody number: CU-COC-807907, Licence Code:
FSC-C004451).
Basis Weight 0 g/m² ISO 536
Caliper 0 µm ISO 534
Laminate
Total Caliper 150 µm±10% ISO 534
Performance Data
Initial Tack 25 N/25mm FTM 9 Glass
Peel Adhesion 90° 25 N/25mm FTM 2 st.st.
24hr
Min. Application Temp. 5 °C TRANSFER PET WHITE TOP
Service Temperature -40 °C to 150
°C
Adhesive Coat Weight 45 g/m² FTM12 S8049
Adhesive Type rubber
hybridised
acrylic BG42WH BSS FSC
Adhesive Performance
S8049 combines extremely high peel adhesion, also on low
surface energy substrates, with excellent chemical and
temperature resistance.
Applications and Use
Transfer PET white TOP is designed for conversion into
identification, warning and tracking labels for durable goods such
as automotive parts, electronic devices and home appliances.
This product is distinguished by the high chemical resistance of
the thermal transfer print. For special requirements we strongly
recommend application tests.
This is a premium product for the automotive industry using
This is an automatically generated datasheet. All data to be considered as typical
values and subject to change without prior notice. Further testing is always
Avery Dennison RHA (rubber hybridised acrylic) adhesive recommended.

technology. It is designed primarily for creating labels to be

If you would like to make a suggestion or comment on this datasheet, please send an
email to datasheet.mgmt@eu.averydennison.com
applied onto low surface energy plastic automotive parts and
lacquers or other rough or low surface energy surfaces. S8049
products are engineered to be resistant to - also harsh -
chemicals commonly found in the automotive and electronics
industry.
Because of the high coat weight and high tack of the adhesive,
there is a risk of adhesive ooze. Special care has to be taken in
the conversion process. It is recommended to contact the
supplier of die cutting equipment to specify the most suitable tool.
Good results have been achieved using a 60° cutting angle with
laser hardening and a no-stick coating.

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Conversion and Printing
Very good results can be achieved with thermal transfer printers
equipped with conventional or near-edge print heads using resin
ribbons. Transfer PET white TOP can also be printed by all
conventional roll label techniques, including flexo, UV letterpress,
silkscreen. This material is qualified for UV inkjet printing by the
following printer manufacturers: EFI Jetrion, Domino (n610i),
Durst (TAU 330 RSC) and Xeikon (PX3000). Results of durability
tests are available on request. For easy diecutting sharp corners
should be avoided.
Shelf Life
To obtain optimal performance, use this product within two years
of the date of manufacture, under storage conditions as defined
by FINAT (20-25°C; 40-50%RH). Prolonged storage outside
these conditions might reduce the shelf life.

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Appendix

UL and CSA recognition

This product meets the requirements as stated in UL 969 and CSA C22.2 No. 0.15 for indoor and outdoor use.
The UL file number is MH27538. For specific information on approved conditions, see appendix.

Performance Data

Note: the following technical data should be considered representative or typical only and should not be used
for specification purposes.

Peel Adhesion:
FTM1: 180°, 300 mm/min, dwell time: 48 hours
Surface N/25mm
ABS 35,0
Aluminium 35,5
Automotive lacquered panels 35,0
Glass 37,0
HDPE 32,0
LDPE 31,0
PA6 36,0
Polycarbonate (PC) 37,0
Polyethylenetherephthalate (PET) 37,5
Polypropylene (PP) 34,0
Polystyrene (PS) 31,0
Stainless Steel 37,0

Due to the unique RHA technology we strongly recommend waiting for 24 hours after application before performing
any adhesive testing.

Chemical Resistance:
The performance results are based on 4 hours immersions at room temperature unless otherwise noted.
Samples were applied to the test panel and conditioned for 24 hours before immersion and evaluated
immediately upon removal. Peel adhesion was measured according to FTM1.
Visual Edge
Chemical Test Substrate N/25mm
appearance Penetration
Ad Blue Stainless Steel 28,0 No change 0 mm
Biodiesel Stainless Steel 35,0 No change 0 mm
Bioethanol E85 Glass 29,0 No change 2 mm
Brake Fluid Glass 35,7 No change 0 mm
Diesel Glass 34,5 No change 0,5 mm
Engine Oil Glass 36,5 No change 0 mm
Gasoline Glass 22,7 No change 4,5 mm
Heptane Glass 23,5 No change 5 mm
Water, distilled Aluminum 29,5 No change 0 mm
Windshield washer Stainless Steel 31,5 No change 0 mm

Chemicals: Ad Blue: Aral, Bioethanol E85: CropEnergies CropPower85, Brake Fluid: DOT 4 Synthetic (One Way)
Diesel: TOTAL, Engine Oil: TOTAL quartz 700, 10 W 40, Gasoline: TOTAL Euro 95

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Appendix
Thermal Transfer Printing:

Printability – Physical Resistance

Flat head printers (tests were performed with the printer Zebra XII 140):
Ribbon Settings Print Quality ANSI Grade Scratch Tape
speed energy resistance resistance
Armor AXR7+ 3 20 ++ A ++ ++
Armor AXR8 3 15 ++ A ++ ++
DNP R300 3 15 ++ A ++ ++
DNP R510 3 20 ++ A ++ ++
Iimak SP330 3 15 ++ A ++ ++
ITW B324 3 15 ++ A ++ ++
Ricoh B110CR 3 15 ++ A ++ ++
Zebra 4800 3 20 ++ A ++ ++
Zebra 5095 3 15 ++ A ++ ++

Near edge printers (tests were performed with the printer Avery TTX 450 – Near Edge):
Ribbon Settings Print Quality ANSI Grade Scratch Tape
resistance resistance
Armor AXR 600 4 ”/s + A ++ o
Armor AXR 800 4 ”/s + B ++ o
Ricoh B120 E 4 ”/s ++ A + +

ANSI (American National Standards Institute) Grade: information about barcode quality
A: excellent B: good C: acceptable D: readable with difficulty
++: excellent +: good o: acceptable -: poor

Chemical Resistance
The printed samples were wetted on the surface with a soft clean cotton cloth soaked in the test solution by wiping 10
times back and forth with light pressure. After 5 seconds they were dried with a clean dry soft cloth. After 15 minutes the
evaluation took place.

AXR 600

AXR 800

B120 E
AXR7+

Z-4800

Z-5095
SP330
AXR8

R300

R510

B324

B110
CR

Ad Blue + + + + + + + + + + + +
Anti-Freeze + + + + + + + + + + + +
Biodiesel + o + + + + + + + - o -
Bioethanol E85 - + + + + + + - + - o -
Brake fluid - + + + o + + - o - o -
Cleaner solvent + + + + + + + + + - - -
Engine oil + + + + + + + + + + + o
Gasoline - o - + - - - - - - - -
Hard wax polish + + + + + + + + + - - -
Isopropanol + + + + + + + + + - o -
Spirit - + + + + + + - + - o -

+: good (no change) o: acceptable (minor change, still readable) -: poor

Chemicals:
Ad Blue: Aral, Anti-Freeze: Speedfrost "Speedfroil" 1:1 in water, Bioethanol E85: CropEnergies CropPower85
Brake Fluid: DOT 4 Synthetic (One Way), Cleaner Solvent:: “Caramba” Cold Cleaner, Engine Oil: TOTAL quartz 700, 10 W 40
Gasoline: TOTAL Euro 95, Hard Wax Polish: „Nigrin“ Hard Wax Polish

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Appendix
Compliance Data

UL – Underwriters Laboratories (UL 969, Category PGJI2)

File Number: MH27538, Category PGJI2

This material is UL recognized for indoor and outdoor use where exposed to high humidity or occasional exposure to water.

Max Temp Min Temp

Application Surface I O
(°C) (°C)
Acrylic paint 150 -40 X X
Acrylic powder paint 150 -40 X X
Alkyd paint 150 -40 X X
Aluminum 150 -40 X X
Chromate treated metal 150 -40 X X
Epoxy paint 150 -40 X X
Epoxy powder paint 150 -40 X X
Galvanised steel 150 -40 X X
Polyester paint 150 -40 X X
Polyester powder paint 150 -40 X X
Polyurethane powder paint 150 -40 X X
Stainless steel 150 -40 X X
Unsaturated polyester – thermoset 150 -40 X X
Nylon – Polyamide 100 -40 X X
Phenolic – Phenol Formaldehyde 100 -40 X X
ABS 80 -40 X X
Polyphenylene oxide/ether (PPOX) 80 -40 X -
Polypropylene 80 -40 X X
Polystyrene (PS) 80 -40 X X
Polycarbonate 60 -40 X X
Polyethylene 60 -23 X X
I: Indoor use O: outdoor use

The UL certification includes the printing with EFI Jetrion, Jetrion 4000 and the following thermal transfer ribbons:
Armor AXR 600, AXR 7+, AXR 8
Astro-med R-5, RAF, RF, RY
Coding Products 5440 (Red), 5640 (Blue), 5940
R300, R510, R510 (Blue), R510 (Green), R510 (Red, indoor use only),
Dainippon
Signature Series (TM) Resin, TR4070, TR6070, TR6075
Dasco DR 74, DR 84
Datamax PGR, SDR, SDR Millennium, SDR-4, SDR-5, SDR-6, SDR-7, SDR-A, SDR-D
ITW B324, M 95, R90, R91
Iimak Primemark, Primemark 255, SH-36, SP-330, SP-410, SP-575
Intermec Corp. 053258-2, 054048-4, TMX1500, TMX3200
Resin 1, Resin 2 (Blue), Resin 2 (Green), Resin 2 (Red, indoor use only),
Japan Pulp and Paper
Sigma P
Kurz K300, K500, K501
Mid-City Columbia Inc. CGL 80HE, MCC-23HE
Monarch 9446
NCR K3, Matrix Resin, PaceSetter, Perma Max, Promark III, Ultra V
Peak Ultra Extreme, Ultra Premium
RSI ID Technologies Pressiza H, Pressiza K, Pressiza R, Pressiza S, Pressiza X
Ricoh 120 EC, B110C, B110CR, B110CX
Sato Corp. Premier 1
Sony Chemicals 4072, 4075, 4080, 4085, 4571, 5070, TRX-75
Union Chemicar Am. US300
United Barcode
HR06
Industries
Zebra Technologies 5095, 5100, 5175, 5463, 5555, Z-1400, Z-3100, Z-4100

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Appendix
Compliance Data

CSA – Canadian Standards Association

UL has tested this product according to the requirements described in CSA C22.2 No. 0.15.
This product is C-UL recognized for indoor and outdoor use.
The details are listed in the UL file number MH27538, Category PGJI8.

Max. Temperature
Group Application Surface
(°C)
Metals Bare, plated or enamelled steel; +150
bare, anodized or enamelled aluminium
Powder coated metal Group C Epoxy powder coat paint +150
Powder coated metal Group D Polyurethane powder coat paint +150
Plastic Group I Phenolic, melamines, urea fomaldehyde +100
Plastic Group II Polyphenylene oxide, polyphenylene sulphide +80
Plastic Group III Polycarbonate, acetates, acrylics +80
Plastic Group IV Polyethylene, polypropylene, polybutylene +80
Plastic Group V Polyamide, polyimide +80
Plastic Group VII PVC (rigid), PVC plasticized +80
Plastic Group VIII Glass-filled polyester, glass-filled epoxy +80

The C-UL certification includes the printing with EFI Jetrion, Jetrion 4000 and the following thermal transfer ribbons:
Armor AXR 600, AXR 7+, AXR 8
Astro-med RAF, RF, RY
Coding Products 5440 (Red), 5640 (Blue)
Dainippon R300, R510, R510 (Blue), R510 (Green), R510 (Red, indoor use only),
Signature Series (TM) Resin, TR4070, TR6070, TR6075
Datamax SDR, SDR Millennium, SDR-5, SDR-6, SDR-7, SDR-A, SDR-D
ITW B324, R90
Iimak SP-575
Intermec Corp. 053258-2, 054048-4
Japan Pulp and Paper Resin 1
Kurz K500
Mid-City Columbia Inc. CGL 80HE, MCC-23HE
NCR Matrix Resin, Promark III
Peak Ultra Extreme, Ultra Premium
RSI ID Technologies Pressiza K, Pressiza S, Pressiza X
Ricoh B110C, B110CR
Sato Corp. Premier 1
Sony Chemicals 5070, TRX-75
Union Chemicar US300
America
Zebra Technologies 5100

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022

 Avery Dennison Materials Group Europe
Willem Einthovenstraat 11
2342 BH Oegstgeest
The Netherlands
+31 (0)85 000 2000

Warranty
All Avery Dennison statements, technical information and recommendations are based ©2022 Avery Dennison Corporation. All rights reserved. Avery Dennison and all other
on tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Avery Dennison brands, this publication, its content, product names and codes are owned
Dennison products are sold with the understanding that purchaser has independently by Avery Dennison Corporation. All other brands and product names are trademarks of
determined the suitability of such products for its purposes. All Avery Dennison’s products their respective owners. This publication must not be used, copied or reproduced in whole
are sold subject to Avery Dennison’s general terms and conditions of sale, see or in part for any purposes other than marketing by Avery Dennison.
http://terms.europe.averydennison.com

Spec Code: AJ059 | EAN Code: 8712739346503 Issue Date: March-2022