Nothing Special   »   [go: up one dir, main page]

General Catalogue CTS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

DISTRIBUTED PRODUCT

CTS Temperature Test Chambers


The latest generation with innovative technique and future-oriented design. The
CTS temperature test cabinets stand out for their high temperature change
rates, easy programming via our modern Multi Touch Panel and low noise
level. Thank to our modular device concept, we are sure to find the right device
and the appropriate solution for your requirements.

Specifications
Temperature Range: -70 to 180°C
Chamber Volume: 100 to 2000 Litres

CTS Climatic Test Chambers


The latest generation with innovative technique and future-oriented design. In
the CTS climatic test cabinets, not only the temperature but also the humidity
stress factor can be simulated. The humidity is measured with a capacitive
sensor which stands out for its high precision, lack of maintenance and long-
term stability. Here too, the advantages of the above-described CTS
temperature test cabinets are of course valid.

Specifications
Temperature Range: -70 to 180°C
Chamber Volume: 100 to 2000 Litres
Humidity Range: 10 to 98 % RH

CTS Thermal Shock Test Chambers


The innovative technology of our CTS temperature shock test cabinets allow
temperature changes up to 100 K/min. The most common national and
international standards (DIN, IEC, MIL) are met. The compressed-air dryer
system used as a standard allows up to 3000 test cycles without defrosting.

Specifications
Temperature Range: -80 to 220°C
Chamber Volume: 32 / 66 / 133 / 350 Litres
No. of Cycles: 3000 Cycles (without defrosting)

PT. NEW MODULE INTERNATIONAL


Jl. Abdul Muis No. 36 Q, Jakarta 10160, Ph. +62 21 3857751, Fax. +62 21 3808281
DISTRIBUTED PRODUCT

CTS Walk-in Test Chambers


The walk-in or drive-in CTS temperature/climatic test chambers are designed
by our experienced sales and project engineers according to your test
requirements. A standardised modular system is available in all sizes with on-
site installation or basic delivery. The walk-in/drive-in chambers are
outstandingly suited for testing bigger components and final products in all
sectors (automotive, electronics, power, aviation, pharmaceutics).

Specifications
Temperature Range: -70 to 180°C
Humidity Range: 10 - 98 % RH
Chamber Volume: > 2000 Liters

CTS Climatic Stress Screening Chambers


The CTS temperature/climatic stress screening test cabinets can achieve high
change rates of up to 30 K/min. with conventional cooling technology thanks to
amplified compressors and a strong fan capacity. By this means, CTS offers
optimised output with low consumption figures and attractive prices. Thus, the
limits of your test item can be determined more quickly. Faster change rates
are optionally possible using nitrogen.

Specifications
Temperature Range: -70 to 180°C
Chamber Volume: 100 to 2000 Litres
Heating and Cooling rate: 5 K/min to 15 K/min

CTS Pharma Climatic Test Chambers


For long-term stability test with highest testing precision.

Specifications
Temperature Range: 10 to 50°C
Chamber Volume: 600 / 1200 Litres
Humidity Range: 10 - 90 % RH

PT. NEW MODULE INTERNATIONAL


Jl. Abdul Muis No. 36 Q, Jakarta 10160, Ph. +62 21 3857751, Fax. +62 21 3808281
DISTRIBUTED PRODUCT

CTS Vibration Test Cabinets


The new series of CTS vibration test cabinets offers you a lot of further options
in addition to a wide range of standard equipment. Whether vibrations are
vertical or horizontal, the modular, standardized assembly can be combined
with all shaker types and adapted to your test requirements. We do of course
also continue to supply custom sizes on request.

Specifications
Temperature Range: -70 to 180°C
Humidity Range: 10 - 95 % RH
Chamber Volume: 700, 1100, 1700, 2300 (Special sizes possible)
Heating and Cooling rate: 5 to 20 K/min

VOC Emission Test Chamber EK1000


1 m3 VOC emission test chamber EK1000 allows for highly accurate and
affordable VOC chamber testing in the automotive industry, and is fully
compliant with the requirements of common European and international, as
well as specific manufacturer standards, including:
ISO 12219-4 / VDA 276 / GS97014-3 BMW Methode / PN 780 Porsche
Methode / VCS 1027, 2769 Volvo Methode / PV 3942 Volkswagen Methode.

The chamber is optionally available with a SHED function for testing according
to GS-97014-2, as well as a fogging device according to VDA 276 and VCS
1027, 2769 (Volvo method), and a nose mask also according to VCS 1027,
2769.

PT. NEW MODULE INTERNATIONAL


Jl. Abdul Muis No. 36 Q, Jakarta 10160, Ph. +62 21 3857751, Fax. +62 21 3808281

You might also like