PRODUCT CATALOGUE

CONTENT
About us 2 ACCESSORIES FOR SERVICE UNITS 42

Short history 3
05.STORAGE UNITS 48
UNDER BENCH CABINETS 50
Relevant standards 4
SUSPENDED CABINETS 53
FREESTANDING CABINETS ON PLINTH 54
01.MODULAR BENCH SYSTEMS 6
ACCESSORIES FOR STORAGE UNITS 56
H FRAME SYSTEM 8
C FRAME SYSTEM 9
ECO-PLYNTH SYSTEM 10
06.REAGENTS STORAGE UNITS 58
BALANCE TABLE 11
MOBILE BENCH 12 Aspirated and filtered safety cabinets for the storage of chemical, 60
acid and base products

02. SINK UNITS /Module sanitare 14 Storage units for flammables /organic solvents /explosive volatile 62
reagents

ACCESSORIES FOR SINK UNITS 17 Combined safety storage cabinets, both for flammables and acids 64

Safety cabinets for gas cylinders indoor storage 66

03.WORKTOPS 20
Ceramic 22
Custom storage cabinets for low concentrated reagents 68
Epoxy resin 23
Vitrous enamel steel 24
Polypropylene Custom storage cabinets for pesticides and phytosanitary chemicals 69
25
Acid-proof solid-grade HPL laminate 26

Melamine (optional – acid-proof) 27 07.CHEMICAL FUMEHOOD 70

Stainless steel 27 08.LABORATORY CHAIRS 74

Quartz engineered stoneware 28
Mineral composite 29

04.SERVICE UNITS 30
MINIMAL SYSTEM 32
MEDIUM SYSTEM 34
CONSOLES 36
 Medlak (Spain) supplies
a wide range of laboratory furniture
items, such as:

Laboratory workbenches (they come in above 30 standard

dimensions, and can be equipped with 10 different work
tops /surfaces). All our workbenches are produced according
the EN 13150:2004 norm.

Weighing /balance tables.

Laboratory storage units: Under bench (fixed or on wheels),

freestanding or wall mounted (they can be produced
in several materials upon request, always complying
with the EN 14727 norm).

Washing /sink units, different by size, materials and application.

Service panels (media channels) complete with power sockets,

water and gas laboratory taps, LED lamps and other holders.

Custom laboratory chemical fumehoods – 4 standard sizes

according to EN 14175 and various exhaust /filtration systems
on request.

Safety cabinets – for acids and other chemical reagents

(produced according EN 14727 and EN 1-61010 norms),
for flammable and explosive products (produced according
EN 14727 and EN 1-14470 norms), for compressed gas cylinders
(produced according EN 14727 and EN 2-14470 norms).

Emergency laboratory showers, freestanding

or bench mounted (produced according EN 15154 norm).

Water taps, flammable and technical gas taps – EN 13792

approved.

Laboratory chairs and stools, with up to -5year warranty.

Office furniture, waiting and meeting rooms, lockers,

step-over benches, storage cabinets and shelves.

Medlakcan provide design and planning, 3D drawings

and plans for all projects.
3
 Relevant standards for the laboratory
furniture industry and for all
Medlak furniture:

Workbenches for laboratories

Dimensions, safety requirements EN 13150
and test methods

Laboratory furniture
Recommendations for design and installation
EN 14056

Laboratory furniture
Storage units for laboratories EN 14727
Requirements and test methods

Color code for taps and valves

used in laboratories
EN 13792

Special storage cabinets for flammable

and explosive products
EN 14470
Fire safety storage cabinets
EN 14470-1
Safety storage cabinets for flammable liquids

Fire safety storage cabinets

EN 14470-2
Safety cabinets for pressurised gas cylinders

Office furniture. Office work chairs EN 1335

Part 1 – Dimensions EN 1335-1

Part 2 – Safety requirements EN 1335-2

Part 3 – Test methods EN 1335-3

Safety requirements for electrical

equipment for measurement, control EN 61010
and laboratory use

4
5
 01

MODULAR BENCH SYSTEMS

Workbenches for laboratory use – modular systems with metal frames or structural
under bench storage units.

The Medlak Collection offers a variety of construction systems

and table worktops, perfect for designing fully functional
and ergonomic laboratory spaces, for chemistry laboratories,
microbiology, and more.

By assembling and fitting with other pieces of furniture such

as service panels, cabinets or washing units, the modular systems
can workup complex bench compositions with linear or central
layout, equipped with all the utilities and accessories needed
to conduct proper laboratory work.

All construction systems are equipped with leveling adjustment

mechanism and some systems have a load bearing capacity
of up to 175 Kg /ml.

For fine weighing, the special tables are provided with an anti-vibrating
countertop area, perfectly calibrated and isolated from the rest
of the construction.

6
 MODULARITY • ERGONOMICS • OPTIMAL USE
OF SPACE • COUNTERTOPS MADE OF CERTIFIED
MATERIALS

There are several laboratory workbench systems, with construction

typologies, suitable for various lab activities:

H Series Robust workbench with ”H” type metal frame,

load bearing capacity up to 175 kg /ml.

C Series Robust workbench with ”C” type metal frame,

load bearing capacity up to 150 kg /ml.

Eco series Laboratory workbench with structural under bench

storage units.

Balance table Weighing tables /table stands for vibration sensitive

laboratory equipment.

Mobile table Mobile workbenches with metallic frame on castors.

7
H FRAME SYSTEM
Modular bench system with side ”H” shaped metal frames
and connecting joists.
All metal elements are epoxy powder-coated.
1
This constructive system has a load bearing capacity
of up to 175 Kg for every linear meter . 2 1
Various storage cabinets with doors and drawers, mobile 3
or fixed – with rigid grip on the metallic table frame,
can be placed under the worktop.
By assembling and fitting with other pieces of furniture such as
service panels, cabinets or washing units, this modular systems 1
can workup complex bench compositions with linear or central
layout, equipped with all the utilities and accessories needed
to conduct proper laboratory work.
Worktop of various materials for laboratory use.

INTENDED USE: Support stand for various laboratory equipment

/equipment of large size and weight or as workbench for various 4
regular laboratory activities.
5
1. Structural joist
2. Worktop – by requirement
3. Back panel (material: melamine)

4. ”H” frame (material: metallic frame epoxy powder-coated)

5. Leveling feet (material: plastic)

Standard sizes
Length 600, 900, 1200, 1500, 1800

Width 600, 750, 900

Height 750, 900

Load bearing capacity 175

8
C FRAME SYSTEM
Modular bench system with side ”C” shaped metal frames
and connecting joists.
1
All metal elements are epoxy powder-coated.
Various storage cabinets with doors and drawers, mobile
or fixed – with rigid grip on the metallic table frame 2 1
can be placed under the worktop. 3
The shape of the supporting frames allow placing under bench
storage with continuous alignment.
By assembling and fitting with other pieces of furniture such as
service panels, cabinets or washing units, this modular systems 1
can workup complex bench compositions with linear or central
layout, equipped with all the utilities and accessories needed
to conduct proper laboratory work.
Worktop of various materials for laboratory use. 4
INTENDED USE: Support stand for various laboratory equipment
/equipment of large size and weight or as workbench for various
regular laboratory activities.
5 1. Structural joist
2. Worktop – by requirement

3. Back panel (material: melamine)

4. ”C” frame (material: metallic frame epoxy powder-coated)

5. Leveling feet (material: plastic)

Standard sizes
Length 600, 900, 1200, 1500, 1800

Width 600, 750

Height 750, 900

Load bearing capacity 150

9
ECO-PLYNTH SYSTEM
Modular bench system with fixed storage cabinets
under the worktop.
Depending on the size of the worktop, it requires a minimum
of two structural cabinets to support the top, covering the entire
space under the counter, or only partially, leaving working place
for the user sitting on the chair (minimum 600 mm).
Worktop of various materials for laboratory use. 1
INTENDED USE: Recommended as regular laboratory
workbenches and support-tables for various laboratory
equipment.

3 2

Standard sizes (mm)

1. Worktop – by requirement
Length 600, 900, 1200, 1500, 1800
2. With storage space covering whole
Width 600, 750, 900 under worktop area, or with gaps for user legroom

Height 750, 900

3. Self-supporting under bench cabinet on plinth.
Load bearing capacity 140 One complete freestanding unit requires a minimum of two under bench storage cabinets
(kg/ml)

10
BALANCE TABLE /MASĂ DE BALANȚĂ
Weighing table with special worktop and integrated
vibration-proof plate with heavy underlayer of fine concrete.
Inner metallic frame vibration decoupled.
For setting up analytical balances and other sensitive
measuring equipment.
The table casing with writing area on one side is freestanding
and does not touch the weighing surface. 1
Legroom for user when in use.

INTENDED USE: Supporting table for analytical balance and other

2
vibration sensitive measuring equipment.

1. Worktop in HPL solid-grade laminate

Standard sizes (mm)
Length 900 2. Weighing plate in quartz stoneware with heavy balance underlayer
in fine concrete and inner vibration decoupled steel framei
Width 750, 900

Height 750, 900 3. Casing in melamine panels

11
MOBILE BENCH
Castor mounted bench with metallic epoxy powder-coated frame.
Workbench for everyday laboratory practice and supporting
construction for analytical equipment and structures.
The castors have a double-roller rubber surface with locking
mechanism, high bearing capacity to static and dynamic load,
so the tables can be easily moved.
Worktop of various materials for laboratory use
1
INTENDED USE: Recommended as regular work tables in the
laboratory and support tables for various devices and equipment.
2 1

3
4

Standard sizes (mm)

Length 600, 900, 1200, 1500, 1800

Width 600, 750, 900 1. Structural joists

2. Worktop – by requirement
Height 750, 900
3. ”H” frame (material: metallic frame epoxy powder-coated)

Load bearing capacity

(kg /ml) 175 4. Heavy load castors with intense traffic rubber rolling surface

12
13
 02

SINK UNITS
Washing stands with one or more sinks, integrated in special countertops
with anti-splash panels and under counter storage.

In order to have maximum functionality and to protect both

the user and the surrounding equipment and furniture,
in laboratories, the washing units area must meet
certain requirements.

Laboratory sinks, available in several dimensions, are integrated

into worktops with specially shaped anti-drip edges (optional).

The taps for water or demineralised water are made of special

anti-corrosion materials and are wall mounted or installed
on the worktop.

14
 MODULARITY • ERGONOMICS • OPTIMAL USE
OF SPACE • WATERPROOF • SPLASH-PROOF

To avoid splashing and damage to surrounding furniture and

equipment, sanitary units can be equipped with splash-proof
panels on both the back of the unit and on the sides.

Under the worktop, the washing units have a special fixed furniture
body, made of waterproof materials and which can be equipped
with customs storage units on plinth, with doors and /or drawers.

The sink units are built in the same parameters of EN 13150

and EN 14727 standards, preserving the design line and
ergonomics in the laboratory.

15
SINK UNITS
Furniture units with special worktops, anticorrosive taps
for water, sinks and undertop cabinets for storage. They can
be integrated into linear island modular compositions,
separating the laboratory wash area.
Depending on the size, the washing units can be equipped 1
with one or two sinks, and with one or more taps for water
or ultra-pure water for glassware washing or supplying various
laboratory equipment with water. 3
Optionally, the worktop where the sinks are incorporated may
have anti-drip overlapped profile edge.
Both at the back, at the wall and on sides, units can be equipped
with splash-proof panels.

INTENDED USE: For areas in which equipment is connected

to water supply and drainage. For cleaning laboratory glassware
and equipment.
2

1. Back and side splash panel made

in HPL solid-grade laminate isolating the washing area

2. Under bench storage unit with doors, shelves and sink cover, made in water repellant panels

3. Acid-proof water outlet and sink mounted on a acid-proof worktop, with or without anti-drip edge

Standard sizes (mm)

Length 600, 900, 1200, 1500, 1800

Width 600, 750, 900

Height 750, 900

16
 ACCESSORIES FOR SINK UNITS
ACCESORII PENTRU MODULE SANITARE

EMERGENCY EYE SHOWER 32100MDS 32301MDS

Single nozzle bench spray unit Double nozzle bench spray unit
vertical extracting, bench top vertical extracting, bench top
mounted (optional – wall mounted) mounted (optional – wall mounted)

Wall mounted or installed

on worktop, mono or biocular
Flow rate : 7 L /min Flow rate : 14 L /min
cups, with extractible hose
Pressure : 5 Bars Pressure : 5 Bars
and /or collecting tray.

SURFACE PROTECTION
Epoxy painted /Nichel plating

MATERIALS
Brass /ABS
Stainless steel /EPDM

HEADWORK SEALING
PTFE temperature
working range: 0-70°

CONNECTION TAP
G ¼” female, G ¾” female,
Swivelling nut G ½” female

31600MDS
31700MDS 31500MDS Floor fixed emergency eye shower
Wall mounted emergency eye shower

Flow rate : 16 L /min • Pressure : 10 Bars Flow rate / 50 L /min Flow rate : 16 L /min
Pressure /: 10 Bars Pressure : 10 Bars

17
 ACCESSORIES FOR SINK UNITS

GLASSWARE DRYER
1
Glassware drying panel 1. PP interchangeable pins
with interchangeable pins,
tray and drain hose. 2. PP back panel

Wall mounted, installed nearby 2

3. Collecting tray
washing areas in the laboratory.
Entirely made of polypropylene, 4. Drip hose
is equipped with 72 various
sizes pins.
At the lower side is equipped Standard sizes
with tray and flexible 450x110x630 mm
3
drip hose.
4

COLLECTOR TANK WITH LEVEL

SENSOR AND ACOUSTIC ALARM
Full acid-proof container made of PP (for storage of acid /corrosive solutions) or metallic 1
(for solvents /petroleum products), equipped with level sensor and sound alert when container
is full. The tank is tapped at the bottom for emptying.
INTENDED USE: For placing under laboratory draining sinks in order to collect waste substances
that cannot be discharged into the sewer or for sanitary units when there is no connection to the
sewer. Ideal for mobile /autonomous sanitary units or washing stations in autolaboratories.
2
Standard dimensions /characteristics:
Custom sizes, depending on the size of the body in which it is installed.

1.Collecting pipe
2.Tank body
3.Drain tap

18
19
 03

WORKTOPS
Worktops in materials with special characteristics and shapes, suitable for various
laboratory activities.

Choosing the table worktop is one of the most important aspects

to be considered in a lab.

Because working in a laboratory often involves using hazardous

substances that stain or are highly corrosive, the furniture used,
especially worktops are highly exposed and can be easily damaged.
For maintaining their function and appearance for as long as possible,
it’s recommended worktops are chosen carefully, even tested
before furnishing the laboratory.

The worktops vary both in standard sizes, physical properties,

and behavior in contact with chemicals – diluted or concentrated
reagents.

Worktop materials have different behavior when exposed to

mechanical shocks, abrasion, high temperatures or wet conditions.

20
 MODULARITY • ERGONOMICS • ACID-PROOF
MOISTURE RESISTANCE • SCRATCH RESISTANCE
MECHANICAL AND THERMAL RESISTANCE

There are 10 materials for laboratory tops available,

each with unique properties:

Ceramic

Epoxy resin

Vitrous enamel steel

Polypropylene

Acid-proof solid-grade HPL laminate

Multilayer melamine (optional – acid-proof)

Stainless steel

Quartz engineered stoneware

Mineral composite

21
 Ceramic

Monolithical mold-casted ceramic top with

acid-proof glazed enamel, with overlaped
marine edge, molded from the same material,
on one or more edges (optional).
The acid-proof coating covers the horizontal
surface, the edges of the worktop (optional),
and the edges of the cutouts for sinks.
The worktop can stand various but limited
cutouts and /or technological holes
(optionally glazed).
Also, can incorporate sinks with same
properties, mounted in various ways:
over the worktop, level with the counter, Acid-proof glazing
or hidden (under the worktop).

INTENDED USE:
Recommendations:
• Worktop recommended in highly corrosive
work environments where concentrated
acids and high temperatures are used.
• The enamel is non-porous and resists up to
24 h without visible changes when in contact
with most concentrated reagents.
• Ceramic countertops are monolithic,
with optional anti-drip profiled overlapped
edges, and can integrate one or more sinks
made of the same material.

Strengths:
• Mold-casted overlapped marine edge
– cast (not applied /glued).
• Sinks made of the same material.
• The best chemical resistance.
• Extremely good behavior in contact with
detergents /disinfectants /dyes.
• The best thermal resistance.

Weaknesses:
• Low resistance to shocks – enamel
can be scratched or damaged.
• High specific weight.
• Limited possibility of non-standard sizes
and cutouts, technological holes, shapes.

Standard sizes (mm)

Thickness 20

Overall thicknes
28,38

22
 Epoxy resin

Epoxy resin – the same material in both –

the mass and the surface of the worktop.
The edges of the tops can be flat (slightly
rounded) or overlapped, anti-drip edges
of the same material.
Epoxy resin tops can include sinks made
from the same material, can support various
cutouts and /or technological holes and can
be polished, for work surface renewal.

INTEDED USE:
Recommendations:
• Monolithic worktop, recommended
in laboratories where organic solvents
and various petroleum products are used.
• The epoxy resin counter has a very good
chemical resistance and best behavior
when in contact with high temperatures
/surfaces.
• It is a fireproof and durable material
– because this type of worktop is
mold-casted and has the same material
both on surface and in its body,
the surface can be renewed by polishing.

Strengths:
• Overlapped edges of the same
material.
• Sinks made of the same material – available
in many standard sizes.
• The surface of the worktop is renewable
by polishing.
• Very good chemical resistance.
• Best thermal resistance – no visible changes
when in contact with red heated iron.
• Free dimensioning – non-standard
dimensions.

Weaknesses:
• Low resistance to abrasion and shocks.
• Anti-drip overlapped edge is glued,
not casted.

Standard sizes (mm)

Thickness 19

Overall thickness
30

23
 Vitrous enamel steel

Profiled steel worktop, with acid-proof

glazing and soft polyurethane core.
The edges of the counter may be flat
and slightly rounded or profiled, overlapped
anti-drip.
These tops can incorporate polypropylene
sinks, but not the same material.
This material can stand various holes
and technological cutouts.

INTENDED USE:
Recommendations:
• This type of worktop has a very good
chemical, thermal and bacteriological
resistance.
• Thanks to the non-porous surface Acid-proof glazing
of the enamel, it does not change colour
when in contact with most pigments.
• Excellent behavior when exposed
to abrasion, UV rays and detergents.

Strengths:
• Resistance to abrasion and high
temperatures.
• Ideal for microbiological laboratories,
hospitals and medical clinics.
• Molded overlapped anti-drip edge
– not applied.
• Light specific weight.

Weaknesses:
• There are no sinks in the same material
available, only PP sinks can be incorporated.
• There are few standard sizes for
countertops.

Standard sizes (mm)

Thickness 44

24
 Polypropylene

Thermopressed polypropylene with hollow

core. The countertop has anti-drip
overlapped edges and can include sinks
of various shapes and sizes.
Some countertop units have drainage ducts
embossed on the surface, ideal for fitting
sanitary units.

INTENDED USE:
Recommendations:
• Ideal in physicochemical laboratories,
namely in areas where concentrated
inorganic acids are used.
• Recommended for fitting the large sink
units and worktops inside the chemical
fumehoods.

Strengths:
• The best chemical resistance.
• Sinks of the same material – built-in sinks
are made in one piece (injection molded,
not attached).
• Many shapes and sizes avalable.
• Worktops (with or without built-in sinks)
always have overlapped anti-drip edge –
cast from the same material, not attached.

Weaknesses:
• All parts in PP are white – no other decor
is available.
• Poor thermal and abrasion resistance.
• Only standard sizes available,
worktops can’t stand cutouts
on non-standard shaping.

Standard sizes (mm)

Thickness 40

25
 Acid-proof solid-grade HPL laminate

The countertop is made of kraft paper

embedded in poliphenolic resins, compacted
at high temperatures /high pressure
– the resulting material is a compact panel with
an acid-proof overlay. The core of the material
can be exposed to moisture /water and various
detergents, without any visible effect.
Both sides of this material are made of
acid-proof melamine.
This type of worktop can withstand various
holes and cutouts and can incorporate
polypropylene sinks.
The edges of the worktop can be flat Acid-proof melamine
(chamfered) or overlapped, anti-drip, made
of same material or epoxy resin (optional).

INTENDED USE: Recommendations:

• Solid-grade laminate with acid-proof surface
– no visible changes when in contact with
most concentrated chemical reagents.
• Recommended for any kind of laboratory
with non-specific activities – chemical,
microbiological, industrial, etc.

*A more simple /basic alternative of this

product is also available – solid-grade laminate Acid-proof melamine
compact worktop, with melamine overlay
on both sides (non-acid-proof). Intended for
lab exposed to water, usual cleaning products,
but no concentrated corrosive reagents.

Strengths:
• Can be cut and shaped outside standard sizes
– cutouts and /or irregular shapes.
• Chemical, thermal and abrasion resistance –
very good.

Weaknesses:
• There are no sinks made of the same
material – sinks provided for this kind
of worktop are made of PP, undertop
mounted. Acid-proof melamine
• Adhesive overlapped anti-drip edges.

Standard sizes (mm) Black coloured edges

Overall thickness
Thickness 16,19 30

26
 Melamine (optional – acid-proof)

Multilayer countertop made of wood panels

with HPL melamine surface and PP edges.
On request, the work surface can be
acid-proof. The edges of the counter
are flat, this kind of worktop does not
stand anti-drip overlapped edges.
Integrating sinks in this kind of worktops
is highly unrecommended.

INTENDED USE: Recommendations:

• Laboratory benches – for regular use.
• Recommended as worktop for writing
desks or as countertop /support for
laboratory equipment in dry areas,
without exposure to wet environments.

Strengths:
• Off-standard shapes and sizes
– on request.
• Good chemical resistance – on request.
Weaknesses:
• Not recommended for workareas exposed
to water or moisture. Standard sizes (mm)
• It is not designed as a worktop for sink units. Thickness 38
• Can’t stand overlapped anti-drip edges.

STAINLESS STEEL
Profiled stainless steel worktop. The edges
of the worktop are flat and slightly rounded.
It does not stand overlapped anti-drip edges
or integrated sinks. High wall edge (80 mm)
on one side – on demand.

INTEDED USE:
Recommendations:
• For use in microbiology laboratories,
in the food industry, in clean rooms.
Strengths:
• Various worktop sizes.
• Good resistance to moisture and detergents.
• Very good thermal resistance.
Weaknesses:
• Low chemical and mechanical resistance. Standard sizes (mm)
• No anti-drip edges – optional wall edge Thickness 32
on one side.

27
 Quartz engineered stoneware

Engineered stoneware tops – the same

material in both mass and surface,
with compact, non-porous composition.
The edges can be flat (slightly rounded
or chamfered) or on demand, with
overlapped anti-drip edges made
in epoxy.
Stoneware countertops can integrate mineral
composite sinks (mounted under the
worktop) or PP (mounted on top). Worktops
can stand various cutouts, technological
holes and non-standard shaping.

INTENDED USE:
Recommendations:
• Because the worktops are casted and have
the same material both on the surface and
in mass, and the surface is non-porous, this
material is suitable for work areas with
increased humidity (e.g. washing units)
and can stand common disinfectants.
• Because of it’s high density, this material
has a high shock, scratch and abrasion
resistance, and is recommended as worktop
in specific industrial laboratories or support
for standard laboratory equipment or tables.

Strengths:
• Very good mechanical and thermal
resistance.
• Non-porous and non-retention: this
material is recommended as worktops
for bacteriology, virology, microbiology
labs, etc.
• Same material both core and surface.

Weaknesses:
• It can only incorporate mineral
or PP (applied) sinks.
• Optional anti-drip overlapped edges
– made of epoxy resin – adhesive.
• Low chemical resistance.

Standard sizes (mm)

Thickness Overall thickness
20 30

28
 Mineral composite

Mineral composite worktop – the same

material both core and surface, with
compact, non-porous composition. The
edges of the tops are flat, lightly chamfered.

Countertops made of mineral composite

can integrate sinks made of same material,
mounted underneath the worktop,
with seamless joints. Worktops can stand
various cutouts, off-standard shaping
or technological holes. The worksurface
can be renewed by polishing.

INTENDED USE:
Recommendations:
• Compact, non-porous material
– recommended in hospitals, clinics,
and workareas with regular disinfection
procedures.

Strengths:
• Large worktops, off-standard shapes
and sizes seamless large worktops
can be made on request.
• Avalable sinks made of same material,
various shapes and sizes.
• Ideal for work areas exposed to water
and moisture.
• Renewable surface by polishing – similar
to epoxy resins worktops.

Weaknesses:
• Low shock, scratch and chemical resistance.
• Low-thickness – countertops don’t stand
heavy loads.

Standard sizes (mm)

Thickness 12

29
 04

SERVICE UNITS
Integrated self-contained accessories and supplies units.

The laboratory work standards involve strict and clear rules

for both electric and for technical or flammable gas
supplies layout.

Workbenches are equipped with technological panels, in order

to comply with the current standards and the laboratory activity
to be carried out in optimal conditions and maximum safety.

Service panels – in all their dimensional versions, and with all

the available equipment levels, transform simple laboratory tables
into professional and fully functional work stations, the user having
in his immediate surrounding all the utilities and supplies required
for his work and equipment.

30
 MODULARITY • ERGONOMICS • UTILITIES
EQUIPMENT

Service panels for both linear benches against the wall and island
/central work compositions:

Minimal System – service unit wall mounted, freestanding

or fixed on benches metallic frame, grouping the supplies
in an accessible area, hiding unaesthetic and dangerous,
supplies connections.

Medium System – shelves and structural metal casing,

wall mounted or fixed on workbenches frames, for central
layout workstations.

Console System – freestanding construction with

multiple configurations for both wall and island
workbenches. It consists of a horizontal metal casing,
optionally with front skirting panel, with shelves
and /or storage units on the upper side fixed
on a metal structure.

31
MINIMAL SYSTEM
Freestanding metal casing, wall mounted or fixed on the Minimal service panel for laboratory workstations mounted on bench frame
benches frame.
Minimal service panel for laboratory workstations, can integrate
all service outlets including sockets and multiple connections
for gas, water, etc.
For wall workbenches, can be both wall mounted and attached
to bench frame. Freestanding and double-sided units available
for island workbenches.
Inner and outer corner connections available for continuous panel
display, following the laboratory's wall contour.
1
INTENDED USE: The compact lines of this system make it suitable
for laboratory benches that support all kinds of equipments.

2
2

1. Connections to water /electrical /gas supplies are made within the casing.
For technical maintenance, connections can be easily reached by removing front panel

Standard sizes (mm) 2. Connecting elements up to the metal casing on the top
are protected with a removable panel, easy to reach at all times
Length 600, 900, 1200, 1500, 1800

Width 100, 150 3. The service unit is fixed to the workbenches frames.
Total workbench width will also integrate the service panel's width
Height 150, 900, 1050

32
 Wall mounted minimal service panel Freestanding minimal service panel for single or double workstation

1
3 2

2 2

1. Connections to water /electrical

/gas supplies are made within the casing. For technical
maintenance, connections can be easily reached by removing front panel

2. If necessary, for technical maintenance

the panels can be provided with technological capped cutouts
1. Connections to water /electrical /gas supplies are made within the casing.
For technical maintenance, connections can be easily reached by removing front
panel
3. Freestanding casing – contains all connections to supplies,
floor mounted connections (for island workbench compositions)
2. Connecting elements is possible if all supplies are contained within the casing's body
or wall mounted connections (for linear workstations)

3. Upper side can be used as storage space for various lab ware

33
MEDIUM SYSTEM
Medium service panel for laboratory workstations, can integrate
Service panel – linear laboratory workbench layout
all service outlets including sockets and multiple connections
for gas, water, etc.
With two fixed shelves for storing various laboratory
glassware and equipment.
On worktop level can also integrate one or more small size
drain sinks.

INTENDED USE: This solution, having both storage and utility

purposes, is intended for most kinds of laboratories, depending 1
on the layout.

Standard sizes(mm)
Length 600, 900, 1200, 1500, 1800

Width 100, 150 1. Services supply mounted on structural metallic case

Shelf width
250
2. Connections to water /electrical /gas supplies can be set both under the worktop
and up to 600 mm over worktop height.
Height 600

34
 Service panel – island laboratory
1 workbench layout

2 3
5

7
7

1. Acid-proof shelving for storing laboratory glassware and equipment

2. Structural metallic case for services supply (electric sockets, water, gas, etc.) – removable front panels

3. Worktop height drain sink

4. Taps and plugs mounted on easy to remove metallic panels

5. One or more drain sinks can be installed. /

6. For island workstations, two medium service panels are fixed back to back and connected to the benches frames and supplies

7. Connecting elements up to the metal casing on the top are protected with a removable panel, easy to reach at all times

35
CONSOLES
Complex modular service panel system made 1. Shelf for glassware /equipment 2. Power sockets console
of various components: open adjustable 3. Functional groove for clamping accesories (eg. pipette holder,tissue holder, etc.)
4. Metal structure with leveling feet
shelving, suspended cabinets, detachable 5. Removable wall for services utilities (non-electrical supplies)
vertical panels for non-electrical supplies, 6. Worktop extension – acid-proof HPL 7. One or mode PP sinks for draining liquids
electrical supplies body and drain sink units. 8. Non-electrical connections: for water /technical gases /flammable gasses, etc.
9. Electrical plugs with protection cover

INTENDED USE: This solution, having both

storage and utility purposes, is intended
for most kinds of laboratories, depending
on the layout. A3

1 2
3

9 8

7
6

Standard sizes (mm)

Length 600, 900, 1200
1500, 1800

Width A1 - 150
Installing:
A2 - 250
• Island workbench console without closing front panels:
A3 - 400 This construction is freestanding, fixed to the
workbenches frames.
Height 1400 • Maintenance /service access: Top shelf is removable.

36
 A1
A2
1 2
3
1 2
3
9
5 9
8 5
8

4
4

Installing: Installing:
• Wall mounted console with front closing • Island layout console with front cover panels:
panel: The consoles metal structure The consoles body is installed by fixing
is installed by fixing it to the workbenches it's metal structures to the adjoining
frame. workbenches frames.
• Maintenance / service access: • Service and access to connections:
All connections fixed behind All connections fixed within
the panel can be easily the panel's area can be easily
accessed – detachable panel. accessed – detachable panel.

37
CONSOLES
SHELF UNIT CONSOLE A3

11

1. Shelf for glassware /equipment

2. Power sockets console

3. Functional groove for clamping accesories (eg. pipette 10
holder, tissue holder, etc.)

4. Metal structure with leveling feet

1 2
5. Removable wall for services utilities
(non-electrical supplies)

8
6. Worktop extension – acid-proof HPL 3 9
7. One or mode PP sinks for draining liquids
7

8. Non-electrical connections taps for water /technical

gases /flammable gasses, etc. 6

9. Electrical plugs with protection cover

10. One or two metal shelves with acid-proof storage surface

and adjustable height mechanism. Optional feature
– LED lamp (height not adjustable)

11. Top shelf with acid-proof storage surface 4

Standard sizes (mm)

Length 600, 900, 1200
1500, 1800 Installing:
• Island workbench console without closing front panels:
Width A1 - 250 This construction is freestanding, fixed to the
workbenches frames.
A2 - 425
• Maintenance /service access: The metal casing's top
A3 - 600 is removable.
• Configuration: One or more height adjustable shelves and
Height 2200, 2400 one fixed top shelf; with one or more sink units integrated.
Optional LED light can be installed on first shelf (fixed).

38
 A1 A2
11 11

10 10

1 2 1 2
9 9
3 3
5
5
8
8

4 4

Installing: Installing:
• Wall mounted console with front closing • Island workstation console: Mounted on
panel: Fixed to the workbenches frames benches frames, with front closing panels.
or to the wall.
• Maintenance /service access: Removable
• Maintenance /service access: shelves and front panels
Removable shelves and front panel.
• Configuration: One or more height adjustable
• Configuration: One or more height adjustable shelves and one fixed top shelf. Optional:
shelves and one fixed top shelf. Optional: LED LED light can be installed on first shelf (fixed).
light can be installed on first shelf (fixed).

39
CONSOLES
CONSOLE WITH SUSPENDED CABINETS
A3

1. Shelf for glassware /equipment

2. Power sockets console

3. Functional groove for clamping accesories (eg. pipette
holder, tissue holder, etc.) 10

4. Metal structure with leveling feet

5. Removable wall for services utilities

(non-electrical supplies) 1
2
6. Worktop extension – acid-proof HPL 3

7. One or mode PP sinks for draining liquids 9 8

8. Non-electrical connections: taps for water /technical

gases /flammable gasses, etc. 7
6
9. Electrical plugs with protection cover

10. Suspended storage unit with two or more compartiments,

450 or 700 mm in height. Optional feature – LED lamp
underneath

Standard sizes (mm)

Length 600, 900, 1200
1500, 1800
Installing:
Width A1 - 350 • Island workbench console without closing front panels:
This construction is freestanding, fixed to the
A2 - 710 workbenches frames.
A3 - 810
• Maintenance/service access: Top shelf is removable.

Height 2200, 2400 • Configuration: Optional: LED light can be installed on

suspended cabinet (fixed).

40
 A2
A1

10
10

1 1
2 2
9 9
3 3

5 5
8 8

4 4

Installing: Installing:
• Wall mounted console with front closing • Island workstation console: Mounted on
panel: Fixed to the workbenches frames benches frames, with front closing panels.
or to the wall.
• Maintenance /service access:
• Maintenance /service access:
Removable shelf and front panels.
Removable shelf and front panel.

• Configuration: Optional: LED light can • Configuration: Optional: LED light can
be installed on suspended cabinet (fixed). be installed on suspended cabinet (fixed).

41
 ACCESSORIES FOR SERVICE PANELS

Wall or bench-mounted, the laboratory taps are made of highly resistant and non-corrosive materials, being also in accordance with the current EU norms.

WATER TAPS
Water taps can be supplied
with oil bath head valve
sealing in EPDM or with 1/4"
turn ceramics head valve.
Maximum working pressure 11003.1MDS 11011.2MDS
10 Bars. 45° handle and nozzle water tap 45° handle and nozzle water top
Nozzle with possibility
of disassembly in compliance
with DIN 12898 regulation.
Handles in compliance
with EN 13792:2000 norm,
manufactured in acid
– resistant PP.
Threads in compliance
with ISO 228/4 regulation,
B tolerance class.
Taps are built following
11001.1MDS 11012.2MDS
Water 90° tap Water 90° tap
the DIN 12918 norm.

11000.1MDS 11010.2MDS 11014.2MDS 11023.2MDS

Water straight tap Water straight tap Wall mounted u-tap with nozzle 90° Vertical “Y” tap

42
PURE WATER TAPS

Pure water taps are made in

RAL 7032 colour, and allow that
the water erogated goes in
touch only PP and never with 11010.2MDSPP
metals or other contaminating Straight pure water PP tap
materials.

The open and close system

is a PP ceramic headwork
with 90° rotation and can
work up to 6 Bars pressure.

All the models made in PP

are supplied with a G ½”
male threaded leg, and a
female G ¼” thread that allow
to screw inside a connector in
PP for tube diameter external
8 mm and internal 6 mm. 11012.2MDSPP
90° pure water PP tap
All the taps are also supplied
with a PP rosetta, with laser
printed the chemical
abbreviation of the water
following the EN 13792 norm,
as also the textual indication.
All the taps are supplied
with removable nozzle G ½”.

11031.2MDSPP
Wall pure water PP tap with swivelling spout

43
 ACCESSORIES FOR SERVICE UNITS

TAPS FOR TECHNICAL GASES

The taps for technical gases

13050.2MDS 13051.2MDS
are supplied with refined Wall mounted tap with 60° nozzle
adjustment head valve, Straight tap
with sealing in PTFE. Fixed
nozzle in compliance with
the DIN 12898 regulation.
Handles in compliance
with EN 13792:2000
regulation and manufactured
in acid-resistant PP.
Threads in compliance
with ISO 228/1 regulation,
B tolerance class. 13052.2MDS 13062.2MDS
Taps are built following Wall mounted tap with 45° handle and nozzle 90° “Y” technical gases tap
the DIN 12918 norm. The taps
for oxygen and hydrogen are
equipped with an headwork
lubrificated with specific
and omologated grease.
Maximum working pressure
– 10 Bars.
Taps finished with
acid-resistant epoxy
powder painting.
13002.1MDS 13012.2MDS
Wall handle and nozzle 45° tap Bench 90° standout

13010.2MDS 13011.2MDS
13000.1MDS 13064.2MDS Straight Single standout Bench 180° stand out

tap Vertical tap

44
TAPS FOR FLAMMABLE GASES

Taps for combustible gases 12051.2MDS 12011.2MDS

are supplied with ceramic Wall mounted tap with 60° nozzle Bench 180° standout
safety spring lock head valve.
Fixed nozzle in compliance
with the DIN 12898 regulation.
Handles in compliance
with EN 13792:2000 regulation
and manufactured
in acid-resistant PP.
Threads in compliance
with ISO228/1 regulation,
B tolerance class.
Taps are built following 12050.2MDS Bench 90° standout 12012.2MDS
Straight tap
the DIN 12918 norm.
The taps for combustible
gases are tested for maximum
working pressure of 0,2 Bars,
manufactured under
DIN 12918, and are all DVGW
approved.
Taps finished with
acid-resistant epoxy
powder painting.
12052.2MDS 12060.2MDS
Wall mounted tap with 45° handle and nozzle Straight “Y” burning gases tap

12010.2MDS 12062.2MDS 12053.2MDS 12064.2MDS

Single standout 90° “Y” burning gases tap 90° burning gases tap Vertical tap

45
 ACCESSORIES FOR SERVICE UNITS

ELECTRIC PLUGS

Single-phase electric plugs,

IP44, 230 V /16 A, complete
1
with plastic cover.
1. Protection cover
INTENDED USE:
Plugs for general use.

HOLDERS FOR GLASSWARE AND ACCESSORIES

Metallic holder, made

of epoxy powder-coated steel
sheet. It can be mounted
on the console’s upper rail.

1. Pipette holder: Made of

epoxy powder-coated steel
sheet or stainless stell sheet 1 2
for laboratory pipettes or tubes.
2. Documents tray:
Metallic holder/tray for papers
/documents (A4 format),
horizontal or inclined.
3. Glove box holder:
Metallic holder for a standard
laboratory glove box, with
cutout on frontal side,
for easy access.
4. Tissue /napkin box holder:
Metallic holder for a standard
laboratory tissue box, with
cutout on frontal side, 3 4
for easy access.

46
47
 05

STORAGE UNITS
Modular cabinets and shelf units, available in various configurations
for laboratory supplies and documents.

MODULARITY • ERGONOMICS
STORAGE • SPACE EFFICIENCY

The storage units in a laboratory must be ergonomically placed,

so that they properly sustain the activity. In this way, our laboratory
storage units collection includes:

Under bench storage units, fixed or mobile (on rubber castors),

in various dimensions, with doors or drawers.

Suspended storage units, wall mounted or fixed on the service

panels metallic frame, with or without doors.

Freestanding units or on plinth. They come in various

configurations and dimensions, for documents and
supplies storage.

48
1. Under bench cabinets – on castors. 2. Under bench cabinets – fixed.
3. Under bench cabinets – fixed, freestanding, on plinth. 4. Suspended cabinet
– monted on consoles metal frame /wall mounted /top cabinet – stacked
on top of freestanding units. 5. Freestanding on plinth – H 900, H 1200, H 2000.

4"
4' 4 4

5" 5' 5 3 3 1 2 3

49
UNDER BENCH UNITS
Storage units, installed under the laboratory worktop, fixed, Under bench cabinets on castors
on plinth, or mobile (on rubber castors), equipped with doors
or drawers.

Construction types:
The inner case: made of wooden melamine panels,
with PP edges.
Optional: top panel can also be made in solid-grade
HPL laminate, in order to use them as an worktop extension.
Doors: laminated HPL-plated boards, complete with 270° –
opening hinges.
Optional: solid-grade HPL laminate panel (12 mm thick).
Drawers: completely metallic interiors, total extraction
sliders with soft-closing system.
Optional: 2 keys metallic lock.
1
INTENDED USE: For storage of supplies and /or lab equipment
of immediate use – under the top.
2
4
3

6 5

1. Drawer with total-extraction sliders with soft-closing system

2. Metallic handle
3. Doors with 270° opening hinges
4. Shelf with adjustable height system
5. Castors in hard rubber with blocking system
6. ”C” or ”H” frame workbench

50
 Fixed under bench cabinets Fixed under bench cabinets on plinth

3 4

2 5 2
1 3

1. Structural cabinet on plinth – holds worktop in place

2. Plinth – floor sealed with pasting

1. ”C” or ”H” workbench 3. Depending on the size of the worktop, it requires a minimum of two structural cabinets
to support the top so that there's no more than 750 mm between cabinets and 300 mm on sides
2. Room for cleaning access

4. Max. 300 mm
3. Fixing cabinet on workbenches joists
5. Max. 750 mm

51
UNDER BENCH UNITS
Configuration

Standard sizes
1 segment 400, 450, 2 segments
Length
500, 550, 600 650, 700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1200

Width 420, 510

Height 665, 815

52
SUSPENDED CABINETS
Suspended storage units can be installed directly
on the wall or fixed on the service panels.

Construction types:
The case: made of wooden melamine panels, with PP edges.
Doors: laminated HPL-plated panels, with 270° opening hinges.
Glass doors: with metal frame with 110° opening hinges.

INTENDED USE:
For storage of documents, supplies and /or lab equipment.
2

3
1

1. Metallic handle
2. Shelf with adjustable height system

3. Doors up to 270° hinges

*Glass doors hinges 110° opening

Configuration

Standard sizes
1 segment
400, 450, 500, 550, 600
*
Length 2 segments
*
650, 700, 750, 800, 850, 900,
950, 1000, 1050, 1100, 1150, 1200

Width 300, 400

Height 300, 350, 400, 700, 800

53
FREESTANDING CABINETS ON PLINTH

Freestanding storage units, floor mounted, equipped with

metallic lower plinth, and complete with levelling system.
They can be ordered with /without doors (laminated or glass),
with or without drawers, with inner shelves or holders
for clothes /work apparel and /or additional storage space
for cleaning products /materials.

INTENDED USE: For storing papers /documents (archives),

lab supplies accessories or clean /sterile lab glassware.

3
Standard sizes
1 segment
400, 450, 500, 550, 600
Length 2 segments
650, 700, 750, 800, 850, 900,
950, 1000, 1050, 1100, 1150, 1200
1. Metallic handle
Width 300, 400, 500, 600
2. Shelf with height adjustable system
Height 900, 1200, 2000 3. Door with 270° hinges
*Glass doors hinges 110° opening

54
Configuration

H 1200

* *

H 900 H 2000

55
 ACCESSORIES FOR STORAGE UNITS

VERTICAL DRAWER /METALLIC SHELF EXTRACTABLE COLUMN

Vertical drawer with metal
shelving. Depending on cabinet's
height, the drawer can be
equipped with up to 6 shelves.

Dimensions: On request.
Restrictions:
Minimum length: 300, 400 mm
Maximum height: 1600÷2000 mm
Minimum width: 500 mm

SPECIAL OPTIONAL SHELF

Acid-proof tray made in PP,
on full-extension gliders.
The tray can slide entirely
outside the cabinet.
PP tray is removable
and easy to wash.

Dimensions: On request.
Minimum cabinet width: 300 mm

WASTE BIN
Can fit in a cabinets
compartment with a minimum
length of 300 mm and minimum
width of 500 mm.
Standard sizes:
• 20 L: 242x420x410 mm
• 2x15 L: 248x480x400 mm

56
57
 06

REAGENTS STORAGE UNITS

Special safety storage cabinets for chemical reagents: concentrated acids and
bases, flammable organic solvents and gas cylinders.

For safety reasons, laboratory standards recommend storing reagents

as following:

Flammables /organic solvent /explosible/ volatile substances

(manufactured according the EN 14727 and EN 14470-1 norms).

Acids and bases: It’s highly recommended that these cabinets

be equipped with a ventilation /carbon filtration system.
The cabinets are manufactured according to the EN 14727
and EN 61010-1 norms.

Combined safety storage cabinets, both for flammables

and acids in separate compartments, manufactured according
to the EN 14727, EN 14470-1 and EN 61010-1 norms.

Safety cabinets for indoor storage of gas cylinders

in compliance with EN 14470-2 and EN 14727.

58
 SECURITY • PROTECTION • VENTILATION
/FILTRATION SYSTEMS ACTIVATED CARBON FILTERS

FITOSANITARE
PESTICIDES | TOXIC

INCHIDETI USILE INCHIDETI USILE

CLOSE DOORS CLOSE DOORS

Warning sticker for cabinets containing liquid and solid Warning sticker for cabinets containing highly Warning sticker for cabinets containing highly
flammable /explosive chemical products. Such cabinets corrosive (acids and bases) chemical products. concentrated pesticides and plant-protection
may be placed inside the laboratories or in special Such cabinets may be placed inside the laboratories substances (solid and liquid). It's recommended
reagent's storage room /warehouse. or in the reagent's storage room or warehouse. that cabinets are made of water and
moisture-resistant materials.

59
 Aspirated and filtered safety cabinets for the
storage of chemical, acid and base products

Relevant standards and norms:

EN 14727:2006, EN 61010-1:2010
Completely produced in pickled and electrogalvanized steel
acid-proof powder-coated. External monolithic construction
completely sealed. Palletized base: design of the base
for easier transportation of the cabinet.
Three tray-shaped removable shelves adjustable in height made
of electrogalvanized steel acid-proof epoxy powder-coated; shelves
with anti-falling security lock. Collection capacity of the shelf
approx. 15 L.
Watertight bottom basin in electrogalvanized steel acid-proof
epoxy powder-coated.
Doors opening up to 110° to allow an easy extraction of the shelves
without tilting them. Acid-proof hidden hinges.
Key lock with extractable cylinder.
Equipped with energy saving system that: adjusts fan speed to the
state of the cabinet (open vs. closed), thereby allowing energy saving
in safety conditions.
Activated charcoal filter positioned inside the cabinet, easy
to be replaced. Equipped with electronic device for charcoal
filter replacement.
Termically protected electro aspirator made of class V0 polymer
to grant the highest level of self-extinguishing, in compliance
with EN 60335-1, EN 60335-2-80 and EN 50366 norms.
“Danger” warning stickers on doors (as per EN DIN 4844
and ISO 3864).
Grounding connection to discharge build-up of static electricity.
Levelling feet for balance.
Usage and maintenance manual.
Packaging with “Tipping over system®” device.

Optional:
Cabinets can also be ordered with glass doors.

60
AA 1200 NEW AA 600

Standard sizes Standard sizes

External dimensions – 2 full doors (mm) 1200x500x1998 External dimensions – 1 full door (mm) 600x500x1998

Internal dimensions (mm) 1120x450x1500 Internal dimensions (mm) 530x450x1500

Weight (Kg) 155 Weight (Kg) 95

Loading capacity (Kg) Loading capacity (Kg)
100
100

61
 Storage units for flammables /organic solvents
/explosive volatile reagents

Relevant standards and norms: EN 14470-1, EN 14727

Storage unit made in pickled steel, acid-proof epoxy
powder-coated.

External monolithic construction completely sealed,

with double cases, internal and external with fireproof
insulation made of highly fire resistant material,
completely ecological.

Inflatable trimming that swells in case of fire, isolating

the inside of the cabinet from the outside. With safety
closing system with spring: in case of fire, automatically
closes the door at a temperature of >50°C. Not electric.

Internal body panels made of anti-scratch material,

resistant to corrosive products.

Natural internal ventilation system for vapours,

equipped with two certified security valves for air
recycling with automatic closure at 70°C.

Three removable tray shaped shelves adjustable

in height made of electrogalvanized steel acid-proof
epoxy powder-coated. Removable and adjustable shelves
with anti-falling security lock by rack.

Collection capacity of the shelf approx. 7 L.

Loading capacity 80 kg.

Watertight bottom basin in electrogalvanized

steel acid-proof epoxy powder-coated.

Opening with no external hinges, anti-spark.

Key lock with extractable cylinder.

“No smoking” and “Fire” warning stickers

on doors (as per EN DIN 4844 and ISO 3864).

Grounding connection to discharge build-up

of static electricity and levelling feet for balance.

62
 AC 600 S AC 600 CM

AC 1200 S AC 1200 CM

Standard sizes
AC 1200 S AC 600 S AC 1200 CM AC 600 CM

2 full doors 1 full door 2 full doors 1 full door

External dimensions (mm)
1200x640x1950 680x640x1950 1180x640x1950 680x640x1950

Internal dimensions (mm) 1053x495x1731 533x495x1731 1015x445x1685 515x445x1685

Weight (Kg) 380 252 490 350

Loading capacity (Kg)

80 80 80 80

63
 Combined safety storage cabinets, both for
flammables and acids (in separate sealed compartments)

Relevant standards and norms:

EN 61010-1, EN 14727, EN 14470-1, CE mark
Completely produced in pickled and electrogalvanized steel
acid-proof epoxy powder-coated.
External monolithic construction completely sealed. Built
with double cases, internal and external. “Danger” stickers for
corrosive, harmful and toxic products on the chemicals compartment
and “No Smoking” and “Fire” warning stickers on the flammables
compartment, as required by EN DIN 4844 and ISO 3864.
Locking system with key and cylinder lock.
Grounding connection to discharge build-up of static electricity.
Levelling feet for balance.

Upper compartment for chemical, acid and base products:

Two tray-shaped removable shelves adjustable in height made
of electrogalvanized steel acid-proof epoxy powder-coated. Shelves
with anti-falling security lock. Door opening up to 110°, with hidden
acid-proof hinges, allow an easy extraction of the shelves without
tilting them. Activated charcoal filter positioned inside the cabinet,
easy to be replaced and electronic device with sound alarm for
charcoal filter replacement. Termically protected electro aspirator
in compliance with EN 60335-1, EN 60335-2-80 and EN 50366 norms,
with 220 /230 V input, max absorbed power: 65 W and ON /OFF lamp.

Lower compartment for flammable products:

Fireproof insulation made of highly fire resistant material, completely
ecological. Internal body panels made of anti-scratch material,
resistant to corrosive products. Inflatable trimming that swells
in case of fire, isolating the inside of the cabinet from the outside.
Extra inflatable trimming with protection against “Cold and Hot
fumes” and dusts. Self-closing door with automatic return. Natural
internal ventilation system for vapours, equipped with two certified
security valves for air recycling with automatic closing mechanism
above 70°C. The valves are positioned at the top and at the bottom
of the rear wall of the cabinet in order to grant the release of
substances, as per normative. External connection collar Ø100 mm.
Watertight bottom basin in electrogalvanized steel acid-proof epoxy
powder-coated, with perforated shelf.
Safety catch that keeps the door closed in case of fire.
Anti-spark hinges.

64
Kemfire 1100 A Kemfire 600 A

Standard sizes Standard sizes

External dimensions – 2 full doors (mm) 1100x510x1670 External dimensions – 1 full door (mm) 595x510x1750

Internal dimensions (mm) 490x465x1020 Internal dimensions (mm) 510x474x924

+ 935x395x445 + 430x355x537

Weight (kg) 300 Weight (kg) 185

Loading capacity (kg) Loading capacity (kg)
80 80

65
 Safety cabinets for gas cylinders indoor storage

Relevant standards and norms: EN 14470-2, EN 14727

Storage cabinet for 2 or 4 gas cylinders (50 L).

Completely made in pickled acid-proof epoxy powder-coated.

External monolithic construction completely sealed.
Made with double casing, internal and external.
Fireproof insulation made of highly fire resistant material,
completely ecological.
Internal body panels made of anti-scratch material, resistant
to corrosive products.
Inflatable trimming that swells in case of fire, isolating
the inside of the cabinet from the outside.
Extra inflatable trimming with protection against
“Cold and hot fumes” and dusts.
Wing doors.
Natural internal ventilation system for vapours, equipped
with two certified security valves for air recycling with automatic
closing system at +70°C. The valves are positioned at the top and
at the bottom of the rear wall of the cabinet in order to grant
the release of substances, as per normative. External connection
collar Ø100 mm.
Prepared for piping passage.
Two gas cylinder brackets with locking chains.
Rolling ramp to enable an easy placement of the cylinders
in the cabinet.
Prepared for safety device to detect gas leakages.
Anti-spark hinges.
Grounding connection to discharge build-up of static electricity.
Levelling feet for balance.
“No smoking” and “Fire” warning stickers on the door, as per EN.

66
BC 1350 GS BC 650 GS

Standard sizes Standard sizes

External dimensions – 2 full doors (mm) 1300x600x2015 External dimensions – 1 full door (mm) 700x600x2015

Internal dimensions (mm)

1165x500x1850 Internal dimensions (mm)
485x569x1850

Weight (Kg) 460 Weight (Kg) 300

Optional: With activated charcoal filters and fan

67
 Custom storage cabinets for solids
and low concentration acids

Relevant standards and norms: EN 14727

Special storage cabinets for low concentration acids,
bases and inorganic salts. Made of acid-proof materials.

The cabinets are made of flame retardant melamine panels.

Door /doors made in solid-grade HPL laminate – 12 mm thick,

with hinges with opening up to 270°.

Four metallic steel inner shelves (epoxy powder-coated)

with adjustable height system.
Optional: Polypropylene or solid-grade compact HPL trays with sliders.

Collector tray at the bottom of the cabinet,

made of powder-coated steel.

Prepared for exhaust /filtration pipe passage connection.

Standard sizes
One door compartment with locking Two doors with closing system (mm)
600x600x2000 1100x600x2000
mechanism (mm)

68
 Custom storage cabinets for pesticides
and phytosanitary chemicals

Relevant standards and norms: EN 14727

Special storage cabinets for pesticides. Can be connected
to ventilation system.

The cabinets are entirely made of galvanized

powder-coated steel.

Door /doors with hinges opening up to 270°.

Four metallic steel inner shelves (epoxy powder-coated)

with adjustable height system.
Optional: Polypropylene or solid-grade compact HPL trays with sliders.

Collector tray at the bottom of the cabinet,

made of powder-coated steel.

Prepared for exhaust /filtration pipe passage connection.

Standard sizes
One door compartment with locking Two doors with closing system
600x600x2000 (mm)
1100x600x2000
mechanism (mm)

69
 07

CHEMICAL FUMEHOOD
Metallic freestanding fume cupboard with exhaust and filtration system and
integrated under bench storage for chemical reagents according to EN 14175.

FUMEHOOD • FILTERS • EXHAUST SYSTEMS

REAGENT STORAGE • WORK SAFETY • AIRFLOW

The chemical fumehood – a protection equipment for laboratory use.

It's main roles are:
To control user's exposure to gases, fumes, vapors aerosols
and other dangerous airborne particles while operating
laboratory procedures involving potentially harmful chemicals.
To prevent the development of explosive clouds within
the working area.
To protect users in case of violent chemical reactions, explosions
or splashes with dangerous substances.
Operating principle: In order to ensure a contained hazardous
perimeter within it's casing, negative pressure relative to surrounding
environment is applied by connecting the fumehood to a complex
exhaust system.

70
The fumehoods casing: Is made of electrostatic powder-coated steel.
For ease of transportation and installation, the fumehood's body is made
of easy to handle parts.

Work area: Is made of a contained protected space, with sealed walls

and joints on all sides, accessible only from the front side, through
a sliding vertical window – the sash. Opening the sash allows access
for placing materials and equipment in the work area, so that the user
can safely operate them. The sash opening can be adjusted at any height
and has an automatic safety locking mechanism.

Control panel: It is ergonomically placed under the worktop and comprises

the controllers for all utilities: electric sockets, lights, ventilation, etc.

Reagent storage body: Located beneath the workspace – for frequently

used reagents and consumables, can be connected to the fumehoods
main exhaust system.

Filters and ventilation: The exhaust system is powered by an electric

single-phase /three-phase motor and centrifugal fan. In order to insure
a constant airflow at the opening of the sash, the fumehood system has
a controller unit that adjusts the fan speed to the opening of the sash.
Filters: The filter system is made of active carbon plates.

INTENDED USE: Designed according to EN 14175, the fumehood is a safety

laboratory equipment insuring safe work environment for operating
laboratory staff.

71
CHEMICAL FUMEHOOD /NIȘA CHIMICĂ
1. Worktop: According to the intended laboratory activity – acid-proof, with drain sink
and /or profiled overlapped anti-drip edges.
2. Storage units: Cabinets placed under the operating panel – for everyday reagents
and consumables – can be connected to the main fumehood exhaust system.
3. Operating panel: Placed ergonomically right under the work area, holds together
all switches and controllers for the fumehood supplies: light, ventilation, water /gas
taps, etc.
a. Exhaust system: Controller with digital screen, assures a constant 0,5 m/s sash
airflow, regardless if the sash is raised or lowered, according to EN 14 175. Equipped
with acoustic sensor – audible warning system in case of low pressure /error.
b. AC plugs: IP44 with protection cover.
c. Faucets: Designed for laboratory use, with remote control valves, mounted on
6
the control panel, and taps mounted on the deflector panel. Color code according
to EN 13 792:2002.
3. Deflector panel: Safely guides the airflow.
4. Safety sash /work area: Work area is contained by acid-proof casing with sealed
joints, front side of the fumehood with vertical sliding sash.
5. Body /case: The fumehoods casing is made of galvanized electrostatic 5
powder-coated steel.
6. Filters: Are made of active carbon plates set up in special casings, easy to replace.
7. Ventilation and ducts: 230 /380 V with acid-proof or antiex ducts. 4
1. Blat de lucru: În funcție de activitate /aplicație – tratat antiacid, cu sau fără cuvă
integrată și margine perimetrală antipicurare.
2. Dulap de stocare: Tratat antiacid pentru consumabile și substanțe utilizate 1
frecvent, cu posibilitate de conectare la sistemul de exhaustare. 3
3. Panou de comandă: Așezat ergonomic sub blatul de lucru, cuprinde acționarea
tuturor utilităților nișei: prize electrice, iluminat interior, robineți, acționare c
și monitorizare aspirație.
a. Ventilație: Controler cu afișaj digital – asigură un debit minim constant b
de 0,5 m /s la deschiderea sas-ului, indiferent dacă panoul glisant este coborât
sau nu, conform SR EN 14175-6. Include senzor și avertizare sonoră în caz
a
de avarie /debit scăzut.
b. Prize: IP44 cu capac de protecție.
2
c. Robineți: Speciali pentru uz în laborator, cu comandă la distanță, cu marcaj
cromatic conform EN 13792:2002.
4. Panou deflector: Direcționează fluxul de aer viciat în procesul de aspirație.
5. Incintă de lucru /sas glisant: Incinta de lucru este capitonată cu materiale
antiacide, etanşate, către fața nișei cu închidere prin panou glisant vertical.
6. Carcasă: Integral metalică, finisată prin vopsire în câmp electrostatic, complet
demontabilă.
6. Filtre: Se compun din lastre de carbon activ în carcase speciale, uşor de înlocuit.
7. Ventilaţie şi traseu de exhaustare: 230 /380 V şi tubulatură antiacidă /antiex.

72 Chemical fumehood /Nişa chimică

Standard sizes Worktop
Lengthmm) 1050, 1350, 1650, 1950 Length (mm) 900, 1200, 1500, 1800
Width (mm) 900 Width (mm) 600, 750, 900
Height (mm) 2400

Features
Ventilation Standard Optional
fan /ducts acid-proof PP

exhaust controller ON /OFF button Inverter

i
power supply tri-phase 380 V mono-phase – 220 V

filters for acids /bases or solvents HEPA filter

Storage cabinets
Standard Optional

made of melamine panels /

flame retardant melamine panels
doors with additional HPL layer
two drawers cabinet one /two doors compartment with 270° hinges
acid-proof shelves
regular melamine shelves tray shaped shelves
1 – 3 doors
(depending on length) metallic powder-coated cabinet
one /two doors compartment with 270° hinges ventilation

metal tray shaped shelves

AC plugs 2 buc x 220 V 380 V plugs

Taps 1 water tap + controller taps for water, gas, N, vacuum, pure
1 pcs gas + controller water, steam, etc.

Recommendation: Fumehood ducts material and filters are to be set

according to the laboratory activity – these vary for acids /bases, solvents, etc.
Exhaust performance can be affected by environment features such as nearby
windows, doors and etc.

73
 08

LABORATORY CHAIRS
Technological seating for laboratory use, made of special dedicated materials,
washable, wear-resistant, fixed or on castors.

Laboratory chairs are made of special materials, in order to comply

with the laboratories routine. Fixed or mobile, with seat, backrest
and adjustable handles, technological seats are easy to clean
with washable surfaces with castors suitable for running surface
and /or leg support ring.

Depending on laboratory's activity, the lab chairs can be:

Common: Stools and laboratory chairs, optionally with tall base

and foot ring, for weighing /microscopy. Seat /backrest made
of moisture resistant materials, washable, resistant to household
and laboratory detergents and disinfectants.
Specially made for pharmaceutical laboratories: GMP certified
and /or clean rooms.
ESD: Made of special materials for this type of activity, there
are ESD materials with which the seat /backrest can be adjusted.

74
 ERGONOMIC • WASHABLE • ESD • ADJUSTABLE

Standard: Optional:
• Black nylon star base, • Metallic base
fixed or on castors • Base with round metallic
• Height adjustment – gas lift footrest
mechanism • Armrests
• Without armrests • ESD

75
LABORATORY CHAIRS
LABSIT
Medium height laboratory chair
for general lab use – star shaped
base in nylon, on castors.
The seat and backrest are fixed
in a plastic shell with a handle
the back for better handling.
Both the seat and the seat rest:

Can be made of hard

polyurethane foam (washable
and antibacterial surface, wear
and shock resistant, stands
regular washing with
disinfectants and detergents).

Can be upholstered in ecological

leather (washable surface,
stands regular cleaning with
disinfectants and detergents,
PVC-free, low maintenance).

Can be upholstered in textile.

Comfortable surface for long
term use, wear-resistant).

Supertec Textile – micro-plating

texture, pleasant to touch,
comfortable for long term
use, cut proof, non-slip, easy
to clean.

Standard sizes
Total height (mm) 770-810
Star base diameter (mm) 640
Seat height /(mm) 420-550
Seat width /(mm) 450
Seat depth / (mm) 420
Backrest height / (mm) 420

76
HOCKER
Swivel, high stool for laboratory use, comfortable, anti-slip seat
made of black soft polyurethane, with adjustable height – gas lift.
Seat and backrest – non-slip, easy to clean polyurethane,
antibacterial, resistant to abrasive and cleaning detergents.

Standard sizes
Total height (mm) 510-830
Star base diameter / (mm) 600
Seat height / (mm) 390-700
Seat width / (mm) 320
Seat depth / (mm) 340

TECHNO
Swivel, medium height chair for laboratory use, comfortable,
anti-slip seat made of black soft polyurethane, with adjustable
height – gas lift.
Seat and backrest – Non-slip, easy to clean polyurethane,
antibacterial, resistant to abrasive and cleaning detergents.

Standard sizes
Total height /(mm) 510-830
Star base diameter /(mm) 600
Seat height / (mm) 390-700
Seat Width / (mm) 430
Seat Depth / (mm) 440
Backrest / (mm) 360/410

77
MEDLAK SL – Avda. Virgen del Rocio S/N C.C. La Colonia local 18. 29670 San Pedro
Alcántara (Málaga)
Tel: +34 951 553 278 • Fax: +34 952 784 031
www.medlak.es • info@medlak.es