Pioneer Dvh-P6050ub crt4141 Car DVD Receiver

ORDER NO.
CRT4141
DVH-P6050UB/XN/CN5
DVD RECEIVER
DVH-P6050UB /XN/CN5
DVH-P6050UB /XN/RC
DVH-P6050UB /XN/RD
DVH-P6050UB /XN/RI
This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks
CX-3212 CRT3896 MS5 DVD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
Manufactured under license from Dolby Laboratories.

"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
DTS and DTS Digital Out are registered trademarks

and the DTS logos and Symbol are trademarks of DTS, Inc.
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2008
K-ZZY. MAR. 2008 Printed in Japan
1 2 3 4
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
Where in a manufacturer’s service documentation, for example in circuit diagrams or lists

of components, a symbol is used to indicate that a specific component shall be replaced only
B by the component specified in that documentation for safety reasons, the following symbol shall
be used:
1. Safety Precautions for those who Service this Unit.

Follow the adjustment steps in the service manual when servicing this unit. When check -
ing or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results.
Caution:
1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.
C 2. During repair or tests, do not view laser beam for 10 seconds or longer .
DVH-P6050UB/XN/CN5
2
1 2 3 4
5 6 7 8
WARNING!
The AEL (accessible emission level )of the laser power output is less than CLASS 1 A
but the laser component is capable of emitting radiation exceeding the limit for
CLASS 1.
A specially instructed person should do servicing operation of the apparatus.
Laser diode characteristics

Wave length:
DVD:660 nm to 670 nm
CD:780 nm to 800 nm
Maximum Output B
DVD : 1.27 mW(Emitting period :9 sec.)
CD : 6.26 mW(Emitting period : unlimited)
Additional Laser Caution
Transistors Q1103 and Q1104 in PCB drive the laser diodes for DVD and CD C
respectively. When Q1103 or Q1104 is shorted between their terminals,
the laser diodes for DVD or CD will radiate beam. If the top cover is removed
with no disc loaded while such short-circuit is continued, the naked eyes may
be exposed to the laser beam.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.
DVH-P6050UB/XN/CN5
5 6 7 8
3
1 2 3 4
[Important Check Points for Good Servicing]

In this manual, procedures that must be performed during repairs are marked with the below symbol.
A Please be sure to confirm and follow these procedures.
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
B
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
C Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
D
a Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts

Use grease and adhesives that are equal to the specified substance.
E Make sure the proper amount is applied.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws

To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
DVH-P6050UB/XN/CN5
4
1 2 3 4
5 6 7 8
CONTENTS
SAFETY INFORMATION .....................................................................................................................................2
1. SERVICE PRECAUTIONS................................................................................................................................6
1.1 SERVICE PRECAUTIONS .........................................................................................................................6 A
1.2 NOTES ON SOLDERING...........................................................................................................................6
2. SPECIFICATIONS.............................................................................................................................................7
2.1 SPECIFICATIONS ......................................................................................................................................7
2.2 DISC/CONTENT FORMAT.........................................................................................................................9
2.3 PANEL FACILITIES ..................................................................................................................................10
2.4 CONNECTION DIAGRAM........................................................................................................................20
3. BASIC ITEMS FOR SERVICE ........................................................................................................................24
3.1 CHECK POINTS AFTER SERVICING .....................................................................................................24
3.2 PCB LOCATIONS.....................................................................................................................................25
3.3 JIGS LIST .................................................................................................................................................26
3.4 CLEANING ...............................................................................................................................................26
4. BLOCK DIAGRAM ..........................................................................................................................................28 B
5. DIAGNOSIS ....................................................................................................................................................33
5.1 OPERATIONAL FLOWCHART.................................................................................................................33
5.2 INSPECTION METHOD OF PICKUP UNIT .............................................................................................34
5.3 DIAGNOSIS FLOWCHART ......................................................................................................................37
5.4 ERROR CODE LIST.................................................................................................................................59
5.5 CONNECTOR FUNCTION DESCRIPTION .............................................................................................61
6. SERVICE MODE.............................................................................................................................................62
6.1 DISPLAY TEST MODE.............................................................................................................................62
6.2 DVD TEST MODE ....................................................................................................................................63
7. DISASSEMBLY ...............................................................................................................................................66
8. EACH SETTING AND ADJUSTMENT............................................................................................................71
C
8.1 DVD ADJUSTMENT .................................................................................................................................71
8.2 TUNER AMP UNIT ADJUSTMENT ..........................................................................................................78
8.3 PCL OUTPUT CONFIRMATION ..............................................................................................................80
9. EXPLODED VIEWS AND PARTS LIST ..........................................................................................................82
9.1 PACKING..................................................................................................................................................82
9.2 EXTERIOR(1) ...........................................................................................................................................84
9.3 EXTERIOR(2) ...........................................................................................................................................86
9.4 DVD MECHANISM MODULE...................................................................................................................88
10. SCHEMATIC DIAGRAM................................................................................................................................90
10.1 TUNER AMP UNIT (SYSCOM) AND PANEL UNIT (GUIDE PAGE) ......................................................90
10.2 TUNER AMP UNIT (POWER SUPPLY) .................................................................................................96
10.3 KEYBOARD UNIT ..................................................................................................................................98 D
10.4 DVD CORE UNIT (1/2) (GUIDE PAGE) ...............................................................................................100
10.5 DVD CORE UNIT (2/2) .........................................................................................................................106
10.6 COMPOUND UNIT(A) AND COMPOUND UNIT(B) .............................................................................108
10.7 WAVEFORMS.......................................................................................................................................109
11. PCB CONNECTION DIAGRAM .................................................................................................................. 112
11.1 TUNER AMP UNIT ............................................................................................................................... 112
11.2 KEYBOARD UNIT................................................................................................................................. 116
11.3 PANEL UNIT ......................................................................................................................................... 117
11.4 DVD CORE UNIT.................................................................................................................................. 118
11.5 COMPOUND UNIT(A) AND COMPOUND UNIT(B) .............................................................................122
12. ELECTRICAL PARTS LIST.........................................................................................................................123
E
DVH-P6050UB/XN/CN5
5 6 7 8
5
1 2 3 4
1. SERVICE PRECAUTIONS
1.1 SERVICE PRECAUTIONS
A
You should conform to the regulations governing the product (safety, radio and noise, and other regulations),
and should keep the safety during servicing by following the safety instructions described in this manual.
Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic
induction.
area and a heat sink becomes hot areas. Be careful not to burn yourself.
- DVD section precaution

1. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
2. To protect the pickup unit from electrostatic discharge
D during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY" .
3. After replacing the pickup unit, be sure to skew
adjustment.
4. During disassembly, be sure to turn the power off since
an internal IC might be destroyed when a connector
is plugged or unplugged.
1.2 NOTES ON SOLDERING
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
E accompanied by reworking of soldering.
Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts:

Parts numbers of lead-free solder:
F GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.
DVH-P6050UB/XN/CN5
6
1 2 3 4
5 6 7 8
2. SPECIFICATIONS
2.1 SPECIFICATIONS
A
DVH-P6050UB/XN/CN5
5 6 7 8
7
1 2 3 4
DVH-P6050UB/XN/RC, RD, RI
A
General Gain ................................. +6 dB to – 24 dB

Rated power source..............14.4 V DC Phase .............................. Normal/Reverse
(allowable voltage range: Bass boost:
12.0 V to 14.4 V DC) Gain ................................. +12 dB to 0 dB
Grounding system.................. Negative type
Max. current consumption DVD Player
...............................................10.0 A System ..................................... DVD video, DVD-VR, Video
Backup current .................. 5.0 mA or less CD, CD, WMA, MP3, AAC,
DivX system
Dimensions (W × H × D): Region number:
B DIN for Middle East Asian and South African models
Chassis .................. 178 mm × 50 mm × 165 ...................................... 2
mm for Southeast Asian models
Nose ....................... 188 mm × 58 mm × 15 mm ...................................... 3
D for South American and Oceanian models
Chassis ................. 178 mm × 50 mm × 165 ...................................... 4
mm Usable discs .......................... DVD video, Video CD, CD,
Nose ....................... 170 mm × 46 mm × 15 mm CD-R/RW, DVD-R/RW
Weight .....................................1 415 g Signal format:
Sampling frequency .... 44.1/48/96 kHz
Audio Number of quantization bits
Maximum power output ...... 50 W × 4 .......................................16/20/24; linear
C
50 W × 2/4 + 70 W × 1/2 Frequency response ........... 5 Hz to 44 000 Hz (with DVD,
(for subwoofer) at sampling frequency 96
Continuous power output .. 22 W × 4 (50 Hz to 15 000 kHz)
Hz, 5% THD, 4 load, both Signal-to-noise ratio............. 97 dB (1 kHz) (IEC-A net-
channels driven) work)
Load impedance ................... 4 to 8 × 4 (CD: 96 dB (1 kHz) (IEC-A
4 to 8 × 2 + 2 ×1 network))
Preout max output level ..... 2.2 V Number of channels ............. 2 (stereo)
Equalizer (3-Band Parametric Equalizer): MP3 decoding format ..........MPEG-1 & 2 Audio Layer 3
Low WMA decoding format ........ Ver. 7,7.1, 8, 9, 10, 11 (2ch
Frequency ............ 40/80/100/160 Hz audio)
Q Factor ................ 0.35/0.59/0.95/1.15 (+6 dB (Windows Media Player)
D
when boosted) AAC decoding format...........MPEG-4 AAC (iTunes ®
Gain ........................ ±12 dB encoded only) (.m4a)
Mid (Ver. 7.2 and earlier)
Frequency ............. 200/500/1 k/2 kHz DivX decoding format............Home Theater Ver. 3, 4, 5.2
Q Factor .................0.35/0.59/0.95/1.15 (+6 dB (.avi, .divx)
when boosted)
Gain ........................ ±12 dB USB
High Specification ........................... USB 2.0 full speed
Frequency ............. 3.15 k/8 k/10 k/12.5 kHz Supply current ....................... 500 mA
Q Factor .................0.35/0.59/0.95/1.15 (+6 dB Maximum amount of memory
when boosted) ............................................... 250 GB
E Gain ........................ ±12 dB File system.............................. FAT16, FAT32
HPF: MP3 decoding format ......... MPEG-1 & 2 Audio Layer 3
Frequency ......................50/63/80/100/125 Hz WMA decoding format ........ Ver. 7,7.1, 8, 9, 10, 11 (2ch
Slope ............................... –12 dB/oct audio)
Subwoofer (mono): (Windows Media Player)
Frequency ......................50/63/80/100/125 Hz
Slope ................................–18 dB/oct
DVH-P6050UB/XN/CN5
8
1 2 3 4
5 6 7 8
AAC decoding format...........MPEG-4 AAC (iTunes ®

encoded only) (.m4a)
(Ver. 7.2 and earlier)
WAV signal format ................ Linear PCM & MS ADPCM
(Non-compressed)
FM tuner
Frequency range .................. 87.5 MHz to 108.0 MHz
Usable sensitivity.................. 8 dBf (0.7 μV/75 , mono,
S/N: 30 dB) B
Signal-to-noise ratio............. 75 dB (IEC-A network)
AM tuner
Frequency range .................. 531 kHz to 1 602 kHz (9 kHz)
530 kHz to 1 640 kHz (10
kHz)
Usable sensitivity.................. 18 μV (S/N: 20 dB)
Signal-to-noise ratio............. 65 dB (IEC-A network)
Infrared remote control

Wavelength............................. 945 nm C
Output ...................................... typ; 10 mw/sr per Infrared
LED
Note
Specifications and the design are subject to mod-
ifications without notice due to improvements.
2.2 DISC/CONTENT FORMAT

D
is a trademark of DVD Format/Logo Licensing Corporation.
DVH-P6050UB/XN/CN5
5 6 7 8
9
1 2 3 4
2.3 PANEL FACILITIES
DVH-P6050UB/XN/CN5
10
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
11
1 2 3 4
DVH-P6050UB/XN/CN5
12
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
13
1 2 3 4
DVH-P6050UB/XN/CN5
14
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/RC, RD, RI A
7 RDM/ /iPod button

12 3 4
Press to turn random function on or off
while using CD or USB.
While using an iPod, press to shuffle all
tracks.
Press and hold to switch the control mode
while using an iPod.
ba 9 87 6 5 If using the iPod with an interface adapter
(CD-IB100 ), press to switch the shuffle B
function.
What ’s What 8 CLOCK/DISP OFF button
Head unit Press to change to the clock display.
Press and hold to turn the display indication
1 SOURCE/OFF button
and button illumination off or on.
This unit is turned on by selecting a source.
• Lights up when the display is turned off.
Press to cycle through all the available
sources.
9 SW/BASS button
Press to switch to subwoofer setting menu. C
2 MULTI-CONTROL
When operating subwoofer menu, press to
Move to perform manual seek tuning, fast
switch menu.
forward, reverse and track search controls.
Press and hold to switch to bass boost
Also used for controlling functions.
menu.
Turn to increase or decrease the volume.
a BAND/ESC button
3 DISPLAY/SCROLL button
Press to select among three FM bands and
Press to select different displays.
one AM band.
Press and hold to scroll through the text in-
Press to return to the ordinary display when
formation.
operating the menu. D
4 OPEN button
b COMP button
Press to open the front panel.
Press to turn COMP (compression) and
DBE function on or off.
5 LIST button
Press to display the disc title list, track title
list, folder list or file list depending on the
source.
• This button is not effective when tuner is
selected as a source.
E
6 EQ button
Press to select various equalizer curves.
DVH-P6050UB/XN/CN5
5 6 7 8
15
1 2 3 4
D Remote control
Button names DVH mode DVD and S-DVD mode
Press to cycle through all the available sources.

1 SOURCE button
Press and hold to turn the source off.
Press to quickly lower the volume level by about 90%.

2 ATT button
Press once more to return to the original volume level.
3 VOLUME buttons Press to increase or decrease the volume.

E AUDIO button Press to change the audio language during DVD playback.
4 SUBTITLE button Press to change the subtitle language during DVD playback.
ANGLE button Press to change the viewing angle during DVD playback.
5 AUTO PLAY button Press to turn the DVD auto-playback function on or off.
6 RETURN button Press to display the PBC (playback control) menu during PBC playback.
Press to operate the preprogrammed Press to turn the bookmark
7 BOOKMARK button functions for each source. function on or off.
F
DVH-P6050UB/XN/CN5
16
1 2 3 4
5 6 7 8
A
Button names DVH mode DVD and S-DVD mode
Switch the operation mode between DVD, S-DVD and DVH modes.
Remote control operation
8 Normally, set to DVH. For details, refer to Using the remote control
mode switch
operation mode switch on the next page.
CM BACK / CM SKIP
9 Press to skip progressively backward/forward through the video playing.
buttons
10 DIRECT button Press to select channels directly. Not used.
11 A.MENU button Press to select various sound quality controls.

B
12 FUNCTION Press to select functions.

Press 0 to 9 to input numbers. Buttons
1 to 6 can operate the preset tuning for Press to select a menu item
0 to 10 buttons, CLEAR
13 the tuner or disc changing for multi-DVD on a video CD featuring PBC
button
or multi-CD players. (playback control).
Press CLEAR to clear the input numbers.
Press to select among three FM bands Press to switch between

14 BAND button and MW/LW bands and to cancel control media file types.
modes of functions. C
Press to turn the information display on or off when the video is displayed.
15 DISPLAY button Depending on the selected source, pressing this button can switch
the display indication on the head unit.
PLAY/PAUSE( )
Press to switch sequentially between playback and pause.
button
REVERSE ( ) button Press to perform fast reverse.
FORWARD( ) button Press to perform fast forward.
PREVIOUS ( ) button Press to return to the previous track (chapter). D
16
NEXT( ) button Press to go to the next track (chapter).
Press to move ahead one frame at a time during DVD/VideoCD playback.
Press and hold for one second to activate slow playback.
STEP ( / ) buttons
If a DVD-VR disc contains a still image, press
while displaying a still image to switch to the next image or video.
STOP( ) button Not used. Press to stop playback.
Functions are the same as MULTI-CON-

TROL on the head unit. E
Move to select a menu on
Move the thumb pad Move to operate fast forward, reverse and
the DVD menu.
track search controls. Also used for con-
17 trolling functions.
Click to display the disc title list, track title
Click to select a menu on
Click the thumb pad list, folder list or file list depending on the
the DVD menu.
source.
MENU button Press to display the DVD menu during DVD playback.
18
TOP MENU button Press to return to the top menu during DVD playback.
F
DVH-P6050UB/XN/CN5
5 6 7 8
17
1 2 3 4
Using the remote control operation

mode switch
There are three remote control operation
modes on the remote control. If you want to
operate this unit by remote control, turn the
mode switch to DVH mode. In this case, both 1
the head unit’s buttons and the remote control
can control this unit. 2 3 4 5 6 7 8
DVH mode operation
B
When operating this unit by remote control,
the mode is normally switched to DVH.
• The thumb pad on the remote control can
perform the same operations as
MULTI-CONTROL on the head unit.
j h f e d c ba9
k i g
DVD mode operation
If you switch the mode to DVD, the thumb pad Display indication
and 0 to 10 operations are changed for the
DVD player. 1 Main display section
Displays band, frequency, elapsed playback
C • When you want to operate the follow- time and other settings.
ing functions, switch the mode to DVD: • Tuner
• When operating the DVD menu by using
the thumb pad.
Band and frequency are displayed.
• When operating the PBC menu by using 0 • Bulit-in DVD player, USB, iPod
to 10. Elapsed playback time and literal infor-
• When specifying title or track by using 0 to mation are displayed.
10.
• When operating the DVD setup menu by
2 LOC indicator
using the thumb pad.
Appears when local seek tuning is on.
S-DVD mode operations.
D
Set to S-DVD mode if the separately sold DVD 3 (shuffle) indicator
player or multi-DVD player is controlled by this Appears when shuffle function is on while
remote control. iPod source is being selected.
S-DVD mode operations are basically the
same as DVD mode operations.
4 F-RPT indicator
Appears when folder repeat is on.
When repeat function is on, only RPT is dis-
played.
5 F-RDM indicator
E Appears when folder random is on.
When random function is on, only RDM is
displayed.
DVH-P6050UB/XN/CN5
18
1 2 3 4
5 6 7 8
6 (Dolby Digital) indicator h (song) indicator

Appears when Dolby Digital audio is se- Appears when the track (song) name is dis-
lected. (Activated only when DEQ-P7650 is played on the main display section.
connected to this unit.) Appears when song search refinement on
the iPod browsing function is in use.
7 (Dolby Pro Logic II) indicator
Appears when Dolby Pro Logic II is used. i (disc) indicator
(Activated only when DEQ-P7650 is con- Appears when the disc (album) name is dis- B
nected to this unit.) played on the main display section.

Appears when album search refinement on
8 (dts) indicator the iPod browsing function is in use.
Appears when DTS audio is selected. (Acti-
vated only when DEQ-P7650 is connected to j (artist) indicator
this unit.) Appears when the disc (track) artist name is
displayed on the main display section.
9 (AAC) indicator Appears when artist search refinement on
Appears when an AAC file is playing. the iPod browsing function is in use.
C
a (WMA) indicator k (folder) indicator
Appears when a WMA file is playing. Appears when operating list function.
When an upper tier folder or menu exists, c
b (MP3) indicator appears.
Appears when an MP3 file is playing. When a lower tier folder or menu exists, d
appears.
c (Video CD) indicator
Appears when a video CD is playing.
When a CD is playing, only is displayed.
D
d indicator
Appears when a DVD-VR disc is playing.
When a DVD video is playing, only is dis-
played.
e (stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
f (loudness) indicator
E
Appears when loudness is on.
g (subwoofer) indicator
Appears when subwoofer is on.
DVH-P6050UB/XN/CN5
5 6 7 8
19
1 2 3 4
2.4 CONNECTION DIAGRAM
DVH-P6050UB/XN/CN5
20
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
21
F
E
B
A
D
C
22
1
1
Power cable connection
AUX jack (3.5 ø) 20 cm 1.5 m

Use a mini plug cable
USB cable
to connect with
Connect to separately sold USB device.
auxiliary device.
Antenna jack
When you connect the separately sold multi-channel
processor (DEQ-P7650 (RC, RD) / DEQ-P6600 (RI))
15 cm to this unit, do not connect anything to the speaker
leads and system remote control (blue/white).
This product IP-BUS input
(Blue) IP-BUS cable Notes:
2
2
• Change the initial setting of this unit (refer to the

Multi-CD player Operation Manual). The subwoofer output of this
(sold separately) unit is monaural.
DVH-P6050UB/XN/RC, RD, RI
Black (chassis ground)

Blue/white
Connect to a clean, paint-free metal location. With a 2 speaker system, do not connect
Connect to system control terminal of the power
Fuse (10 A) amp or auto-antenna relay control terminal anything to the speaker leads that are not
> connected to speakers.
(max. 300 mA 12 V DC).
Yellow
DVH-P6050UB/XN/CN5
Connect to the constant 12 V supply terminal. White Gray
Front speaker Front speaker
Fuse resistor
3
3
Left White/black Gray/black Right

Red
Connect to terminal controlled by ignition switch (12 V DC). Green Violet
Rear speaker or Rear speaker or
Subwoofer (4 ) Subwoofer (4 )
Green/black Violet/black
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any When using a subwoofer of 70 W (2 ), be sure to connect with Violet and Violet/black leads of this unit.
connections. Do not connect anything with Green and Green/black leads.
Green Violet
Violet/white Subwoofer (4 )
Not used.
Of the two lead wires connected to the back lamp, 2
connect the one in which the voltage changes when Green/black Violet/black
the gear shift is in the REVERSE (R) position.
4
4
5
5
Connecting to separately sold power amp
Power amp (sold

separately)
Connect with RCA cables

(sold separately)
Power amp (sold

separately)
Power amp (sold

separately)
6
6
Front output
Rear output
This product Subwoofer output

Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
System remote control
DVH-P6050UB/XN/CN5
Left Right
7
7
Front speaker Front speaker

When you connect separately sold multi-channel
processor (e.g. DEQ-P7650 (RC, RD) / DEQ-P6600 (RI))
to this unit, do not connect anything to the speaker
leads and system remote control (blue/white).
Rear speaker Rear speaker
Note:
When you connect multi-channel processor to
this unit, separately sold power amp must be
connected to multi-channel processor.
Subwoof er Subwoof er
No
Change the initial setting of this product
(refer to the Operation Manual). Perform these connections when
The subwoofer output of this unit is monaural. using the optional amplifier.
8
8
23
E
A
D
C
F
B
1 2 3 4
3. BASIC ITEMS FOR SERVICE

3.1 CHECK POINTS AFTER SERVICING
A
To keep the product quality after servicing, please confirm following check points.
No. Procedures Item to be confirmed

1 Confirm whether the customer complain has The customer complain must not be
been solved. reappeared.
If the customer complain occurs with the Display, video, audio and operations must be
specific media, use it for the operation check. normal.
2 DVD Measure playback error rates at the Deterioration of mecha-drive can be checked.
innermost and outermost tracks by using the The error rates must be less than 2.5e-4.
test mode with the following disc.
DVD test disc (GGV1025)
B 3 DVD Play back a DVD. Display, video, audio and operations must be
(Menu operation; Title/chapter search) normal.
4 CD Play back a CD. Display, audio and operations must be
(Track search) normal.
5 FM/AM tuner Check FM/AM tuner action. Display, audio and operations must be
(Seek, Preset) normal.
Switch band to check both FM and AM.
6 Check whether no disc is inside the product. The media used for the operating check must
be ejected.
7 Appearance check No scratches or dirt on its appearance after
receiving it for service.
For check items concerning image and voice, please refer to the followings:
C
Check items concerning image Check items concerning voice
Block-noise Distortion
Crosscut noise Noise
Dot noise Low volume
Distorted image (Image skip) High volume
Low brightness Changes in level
Too bright Pause of sound
Color fading
Partial discoloration
DVH-P6050UB/XN/CN5
24
1 2 3 4
5 6 7 8
3.2 PCB LOCATIONS

A Tuner Amp Unit
A
B Keyboard Unit
C Panel Unit
D DVD Core Unit

C
E Compound Unit (A) F Compound Unit (B)
Unit Number : CWN3298(CN5) D

Unit Number : CWN3294(RC)
Unit Number : CWN3295(RD)
Unit Number : CWN3296(RI)
Unit Name : Tuner Amp Unit
Unit Number :
Unit Name : Keyboard Unit
Unit Number : CWN3429
Unit Name : Panel Unit
Unit Number : YWX5005 E
Unit Name : DVD Core Unit
Unit Number : CWX3595
Unit Name : Compound Unit(A)
Unit Name : Compound Unit(B)
DVH-P6050UB/XN/CN5
5 6 7 8
25
1 2 3 4
3.3 JIGS LIST
A
TORX driver(T2) GGK1095 Skew adjustment
Bond GEM1033 Skew adjustment
Disc GGV1025 Skew adjustment, Check points after servicing,
Inspection method of Pickup Unit
Disc TCD-782 Inspection method of Pickup Unit
- Grease List
Name Jig No. Remarks
Grease GEM1024 DVD Mechanism Module and Chassis
Grease GEM1043 DVD Mechanism Module and Chassis
Grease GEM1045 DVD Mechanism Module
B Grease GEM1050 DVD Mechanism Module
Locking agents 1401M DVD Mechanism Module (1401M:produced by THREE BOND)
3.4 CLEANING
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned Cleaning tools
C DVD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
Portions to be cleaned Cleaning tools

Fans Cleaning paper : GED-008
DVH-P6050UB/XN/CN5
26
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
27
1 2 3 4
4. BLOCK DIAGRAM
A
A TUNER AMP UNIT
VDD5V
TUNPDI
TUNPDO
CE2
CE1
TUNPCK
SL
7 6 13 5 10 9 8 11 14 18 19 20 21
FM/AM TUNER UNIT
ROM_VDD
DI
CE1
NC
NC
NC
NC
NC
NC
CE2
SL
DO
CK
IC3 EEPROM IC5
5.0V 5V→ 3.3V
OSC LPF
CN402
AM ANT FMRF
1
ANTENNA 1 ATT
B 2,3
IC2
2.5V
FM ANT IC1
3 3.3V
ATT Lch 23 6 IC401 5
IN2+ OUT2
FMRF MIXER, IF AMP DET, FM MPX
NJM2794RB2
RF adj
ANT adj
T51 CF52
ACC5V
Q311
AUDIOGND
IC4
OSCGND
VDD_3.3
3.3V 3.3V→ 2.5V 2.5V

RFGND
L-MO
DGND
VCC
NC
TC7
2 12 15 22 16 4 17 5
1
C CN311
D 1
SYS+B TUN33
2
4
CN1852
VIDEO SELECTOR IC503 IC502 OSD

IC191 Q502 X501:17.734475MHz TC7WB383FBK IC504
TC7SU04FU
BA7611AF V33 3
7 2 PDC150A
VIDEO IN ISO 5 XTALin
CN281 IC152 2 4 2 4 2
(1/2) Q501 5
NJM2505AF 5 EX 27
V33 CVout
VIDEO IN 4 1 1 IC501 Q551
VIDEO IN 3 Vin Vout IN1
8 X502:14.318 18 MHz TC7SU04FU 30
CN231 VOUT CVcr
32
4 AUXL MINIJACK VIDEO ISO SYNin
76 29
IC171 CVin
3 AUXR CLKCHG 31
NJM2505AF 2 68 HFTin
AUX 2 AUXGND 1 6
CTLA VSEL1
7
OSDMUTE 59
4
Vout IN3 CTLB 3 69
VSEL2 MUTE
1 AUXV Q171 9
Vin 55 SYNCJDG 77 SYNCjdg/Rout
V+ VIDEO5 USBL LOUT OSDCS 23 14
4 31 CS
IPOD CP nRESET CPRST 1 OSDD 99 15
USB5V USBXTAL1 SIN
4 I2C-SDA/ 13 32 X1201
IC1301 IN2 IC1402 SPI_SOMI SDA
48.000 OSDCLK 100 16
SCLK
R5523N001B 341S2159 I2C-SCL/ 12 33 2 MHz
SPI_SIMO SCL USBXTAL2
VCC
D 4 SYSTEM
VIN ACC5V 5 Q1401
USB CONTROL CONTROLLER
CN1301 1 USBCTL USB33 IC1201
USB5V 5 EN IC601(2/2)
1 VOUT FLG PE5647B
FLG 3 17
PEG456A
USB ADENA
2 USBDM DM DM 4
DM 21 3
3 USBDP DP DP 5 BSI BSO 48
DP MUTE
22 4
FLMDO 15 BSO BSI 26
FLASH FLMDO COOLCONT
USBRST USBRST 16 23 5 70
WRITER RESET BSCK BSCK VMUTE
CN101 BRXEN
26 9
BRXEN
50
COMPOSIT XTAL1 27 13
9 X1202 19
LOUT MSL BSRQ BSRQ XIN
16.934 46
12 MHz 8
52 STBY BRST X601
Q101 XTAL2 11 15.000MHz
XOUT BZ601
SYS+B
USBCTL 82 24
USBCTL BEEP
Q102 FLG 85
FLG 71
USBRST 20 FLPILM
USBRST
AMUTE 12 11 39
D 21
17
MS4→SRX 4
2A
4A 3V→5V
IC101
4Y
2Y
6 30
AMUTE
RXMS5
EJTIN
89
VD5
CN1901 Q1151
STANBY 9 8 42 FU1151
16 3A TC74VHCT08AFTS1 3Y STANDBY ACC5V MSVDD5
E 20
XRES 11
4Y 5V→3V 4A
12 40
XRESET VD8
IRQPWR 8 9 41 2
19 3Y IC102 3A IRQPW Q1152 VD8V Vcc
S→MS4TX 3 1 29 IC1161
18 1Y TC74VHC08FTS1 1A TXMS5 1 BA00DD0WHFP
CTL
WAKEUP 44 43
1 WAKEUP
VDCONT
SYS+B 22
TUNER3V SYS+B ILMPW
1 2
3 IC1021 1 2 IC1001 VIN BUP ROT0
TUN33 OUT IN VOUT 1
NJM2885DL1-33 NJM2388F84 CONTROL 4 46
SYSPW ROT1
40 VD Q1153 67
| MSVD8 JOYST
38
A S701
27 VDD5 Q1051 VDD5V 21
| MSVDD5 DSENS
24 VDD5V BUP
Q1052
FU1101 50
SWVDD
BUP VID
FU1103 Q1105 Q1103 RESET
ACC5V 10 1 IC602 2
USB33 RESET VDD5V BUP
IC1141 BD4835G Q103
7
S-1206B33-U3 OUT2 S601
3 45
3 ON/OFF ACCPW
2 Q1106
USB33 VOUT VIN 11 55
DTC1 OSDPW
VDD5V D/D CONVERTER
F FU1102 Q1104
Q1102 9
IC1101
B KYDT
34
VD8V VCC AN8011S 33
DPDT
2
10 RT Q1101 91
OUT1 CSENS
VR1101 75 DDCONF
DVH-P6050UB/XN/CN5
28
1 2 3 4
5 6 7 8
CN282
SWL S/WL 4
Q281
SYSTEM
IP-BUS DRIVER CONTROLLER FL FRONTL
IC131 IC601(1/2) 2 RCA OUT
CN131 HA12241FP PEG456A Q282
1 6 DIN1 1 28
BUS+ TX
5 5 ROUT 2 27
BUS- RX RL REARL
8 STBY 25 6
IP-BUS 8
RX2
7 IPL+ 47 Q284 Q283
Q131 IPPW
11 IPL- BUP2
BUP
38
ASENBO
BUP2
B
CE2
CE1
63
64
CE2 BUP >
CE1 CN751 CEK1136
TUNPDO 84 17
BSENS 10A
TUNPDO BSENS B.U 1 B.U
401 5 TUNPDI 66
OUT2 TUNPDI Q711
94RB2 TUNPCK 65 18 ACC 1K ACC
TUNPCK ASENS 5
SL 95 SL
ASENS B.GEAR SENSE (1/2W)
Q731
72 B.G.SENS B.G.SENS
BGENS 3
TELMUTE
Q741
36 TELM TELM
TELIN 7
ACC5V
Q311
OPT3
GND GND
L-MOS and Gate AMPPW 49 2
IC311 ELECTRONIC VOLUME/

TC7SET08FUS1 SOURCE SELECTOR POWER
5
1 IPL+ 3 CONNECTOR
4 OPT2(OPTOUT) IPL- 4
IN4+_L
BUP C
2 IN4-_L Pre/SW_L 12
TUNL 5 6,20
IN3_L IC201
AUXL 2 PML018A VCC1/2,3/4
IN5+_L 10 12 5 FL+ 12 FL+
MSL 7 Front_L FLIN FL+
IN1_L 3
6 11 14 AMP FL- FL- 10 FL-
USBL IN2_L Rear_L RLIN
OSD IC251 RL+
21 RL+ 11 RL+
FBK IC504 PAL007C 23 RL- 9 RL-
PDC150A VIDEO OUT ISO 6dB AMP 4 RL-
7 2 IC591 IC592 STBY 25 BREM BREM
XTALin B.REMOTE
Q571 VR571 Q572 NJM2505AF TK15405BMI 4
MUTE
27 4 1 4 2
CVout Vin Vout IN OUT 22
CN281
30 (2/2)
CVcr
32 VIDEO OUT
SYNin 1 VIDEO OUT
29
CVin
31
HFTin CN312
7 OPT2(OPTOUT) 2
MUTE
9 OPT3 3
SYNCjdg/Rout OPT-OUT
14 1
CS
15
SIN MUTE
16 Q251 FAN
SCLK Q285 FAN REG
Q1081
CN1081 MOTOR
BUP
Q253
BUP 2 D
Q286
1
Q252 Q1083
BUP
VST,VCK,VDT
A
Q1082
FLPILM
BUP
Q701
FLPILM
5 5 C PANEL UNIT
D1970
1 1
Q702
EJSW
8 8
B KEYBOARD UNIT
S1970
9 9
MSVDD5 EJECT
ILM+B WHITE
Q1071
CN1972 CN2101 ILLUMI BLUE ILLUMI E
VD8 ILM+B IL+B
2 BUP 10 10 5 8
Vcc Q1072
IC1161 4
MSVD8
1 BA00DD0WHFP Vout MULTI-CONTROL D2106, D2107-
CTL S2110 D2115 D2114
B
ROT0 ROT0 Phase_B 10
13 13 9 4
ROT1 ROT1 Phase_A 1
12 12 7 6
JOYST JOYSH
2 2 2 11
SWDVDD BLUE
Q1061
SWVDD SWVDD ILLUMI KEY MATRIX
VDD5V 4 4 3 10
S2101 S2102 S2103
SRC BAND COMP
D2105
SWVDD S2104 S2105 S2106
VIDEO5V KDT1-3,KST1-3
Q1031 DISP SW CLOCK
FU1031
VDD5V BUP VIDEO5
Q1032 S2107 S2108 S2109
VIDEO3V REMOTE CONTROL Q2103
RDM EQ LIST
IC1041 SENSOR
S-812C33AMC-C2N IC2102
3
OPT IN 46 47 58
2 3 GP1UX51RK 1 57
VIN VOUT V33
ROUT2
REM V3 VCC
54
X0
KYDT
14 14 8 5
KYDT 49
TXD X2101
F
DPDT DPDT 50
LCD DRIVER 5.00MHz
11 11 10 3 RXD KEY CONTROLLER 55
X1
CSENS
6 6 11 2
CSENS IC2101 LCD
PD6569A LCD2101
CN701 CN1971
DVH-P6050UB/XN/CN5
5 6 7 8
29
1 2 3 4
D DVD CORE UNIT

NRES
A
VIDEO+AUDIO AUDIO 2C
IC1501 I
MN2DS0016AAUB PCM
101 174 SRCK 1
NRST SRCK BCK
LATCH ADOUT3
175 ADOUT3 2
DATA
IC1352 LRCK
173 LRCK 3
LRCK
TC74LCX16373FT 91 SDODAC 13
SDODAC MD
90 SCKDAC 14
A0-15 AD0-15 AD0-15 SCKDAC
74 LTDAC 15
MC
LTDAC ML
172 DACCLK DACCLK 16
DACCK SCK
A16-19
48
1LE 1 XCSSR 77
25 4 XCSSR
2LE 2 XCSFM 51
NEXCE
IC1351
FLASH 16M TC7SZ08FU
A0-15 AD0-15
IC1401 OSCO
169
CWW1465 X1501
B
A16-19
170
OSCI
26 XCSSR
CE
11 XWR1 62
WE NEXWE
152 (CR) CR
Cr
IC1402 153 (CB) CB
Cb
CWW1466 Y
154 (Y) Y
26 XCSFM 161 (COMPOSIT) COMPOSIT
CE Comp
IC1403 78 STANBY
STANDBY
TC7SZ32FU 1 SLVSTS
79 STSCOMN
11 XWR2 4 80 CMDCOMN
WE 2 HOSTCMD
89
IRQPWR
NRES 12 28 XRD 50 87
RESET OE NEXOE AMUTE
147
DSCSNS
144
PHOTOSNS
179
IECOUT
SDRAM CONT2
85
C IC1481 84
CONT1
EDS1232AATA-75 95
DRV3
96
MA0-11 DRV2
97
MD
93 LDIN
LOADIN
MDQ0-31 FG
99
150
FD
149
DQM0-3 TD
22 8
BA0 BA0
23 10
BA1 BA1
17 XWE 3
WE NWE 94
18 XCAS 4 CLAMP
CAS NCAS
19 XRAS 5
RAS NRAS
20 XCSM 6
CS NCSM
68 MCK 234 98
CLK MCK HOME
232 145
MCKI TEMP
122 B
VOLTAGE DETECT VIN2RF
142
IC1003 VIN2
123 A
D S-80859CNNB-B9K VIN1RF
143
2 1 VSENS 88 VIN1
VD8 VDD OUT VSENCE 121 C
VIN3RF
140
VIN3
92 120 D
P0 VIN4RF
189 141
EXTRG1 VIN4
192 136 FE1
SCLOCK VIN5
191 137 FE2
SDATA VIN6
190 130
EXTRG0 CDMPD
188 128
TRCCLK DVDMPD
187 116 RF
TRCDATA0 RFINN
186 134
TRCDATA1 F+H_G+H
185 135
TRCDATA2 E+G_E+F
184 131
TRCDATA3 LPCO2
183 129
TRCST LPCO1
E
VDD5
DVH-P6050UB/XN/CN5
30
1 2 3 4
5 6 7 8
A
AUDIO 2CH ANALOG OUT
IC1801 CN1901
PCM1753DBQ NRES XRESET
21
RCK 1 7 LOUT ANALOG LOUT
BCK VOUTL 29
DOUT3 2 CR
DATA 38
RCK 3 CB
LRCK 36
DODAC 13 Y
MD 34
CKDAC 14 COMPOSIT
MC 32
TDAC 15 STANBY
ML 25
ACCLK 16 STSCOMN SLVSTS
SCK 24
CMDCOMN HSTCMD
23
IRQPWR
22 A CN101
AMUTE
20
VCC5 REG.
IC1004 VDD5
VD5 14
|
NJM2880U1-05 17
5 VD8
4 VIN 3
VCC5 VOUT 1
CONT 2
VD8 |
1 B
AVCC5 REG.
IC1005
WAKE UP
40 E COMPOUND UNIT(A)
S-L2980A50MC-C7J DISC DET
1 IC1301 CN1301
5 VIN S1203 S1204
AVCC5 VOUT 3 TC7SZ125FU DiscDetect 4 DISC SENS
ON/OFF 3
1 S1202
DSCSNS 4 2
S1201
8cm 3 8cm
2
8cm 2 12cm
4 S1205
12cm 5 8cm
5
PHOTOSNS Photo 6 Q1299
1
CN1852
IECOUT
1 A CN311
CLAMP1 S1206
TP1 CLAMP
MOTOR DRIVER
IC1201
BD7996EFV CN1201
CONT2 20 18 B-
CTL2 SLO2- 1
CONT1
DRV3
21
25
CTL1
SLIN2
SLO1-
SLO2+
16
17
A-
B+
2
3
F COMPOUND UNIT(B)
DRV2 26 15 A+
SLIN1 SLO1+ 4
MD 29 42 COILV COIL_V
SPIN V 5
10
LDIN 6
13 39 COILW COIL_W
FG W 7
FD 51
TD 50
ACTIN1
44 COILU COIL_U
8 M2 Motor(STEPPING)
ACTIN2 U 9 CXM1364
10
36 HBM HALL_BIAS-
HB 11
HW-
30 HWM HALL_W-
12 M3 Motor(SPINDLE)
31 HWP HALL_W+ CXM1362
HW+ 13 D
32 HVM HALL_V-
HV- 14
33 HVP HALL_V+
HV+ 15
34 HUM HALL_U-
HU- 16
35 HUP HALL_U+
HU+ 17
HALL_BIAS+
VDD5 18
HOME SWITCH
20
2 FOM
ACO1-
1 FOP
ACO1+ CN1101
3 TOM
ACO2+
4 TOP FOM F-
ACO2- 1
FOP F+
2
TOM T-
3
TOP T+
4
TEMP TH
5
B
7
A
8
3.3V REG. C
9
IC1007 D
10
NJM2885DL1-33 FE1
11 E
1 3 FE2
VDD5 IN OUT VCC33 12
CDMPD 78MD
14
1.2V REG. DVDMPD 65MD
15 PICKUP UNIT
IC1008 RF
17 (SERVICE) (DP8)
R1232D121B F+H_G+H F+H/G+H
21
2 E+G_E+F E+G/E+F
VIN 8 22
LX VCC12
3
VDD Q1102 Q1104
LPCO2 LD(CD)
24
Q1101 Q1103
LPCO1 LD(DVD)
25
VREF 19
VCC
VCC5 20
DVH-P6050UB/XN/CN5
5 6 7 8
31
1 2 3 4
DVH-P6050UB/XN/CN5
32
1 2 3 4
5 6 7 8
5. DIAGNOSIS
5.1 OPERATIONAL FLOWCHART
A
Power ON
VDD1 = 5 V
Pin14
BSENS
Pin17
BSENS = L B
ASENS
Pin18
ASENS = L
DSENS
Pin21
DSENS = L
C
ASENBO <- H
Pin38
CSENS
Pin91 Except 2 V < CSENS < 3 V
Last source returns.
2 V < CSENS < 3 V DVD loading functions are available.
Keys except for EJECT key are not available.
Starts D
communication
with Grille microcomputer.
300 ms
SWVDD <- L
300 ms
Pin50
In case of the above signal, the communication

Source keys
with Grille microcomputer may fail.
operative
If the time interval is not 300 msec, the oscillator
may be defective. E
Source ON
SYSPW <- H
Pin46
Completes power-on operation.

(After that, proceed to each source operation)
F
DVH-P6050UB/XN/CN5
5 6 7 8
33
1 2 3 4
5.2 INSPECTION METHOD OF PICKUP UNIT
Disc to be used
A
CD-DA: TCD-782
DVD-Video: GGV1025
Execution method
START Replace the PICK UP
LD turned on? Check parts SKEW ADJ.

B
No
Yes
Check point:
Check point: RF level check
LD current check AS MAX check
LD current check
Is it OK? Replace the PICK UP Is it OK?

No No
Yes Check point: Yes
Error rate check
Error rate check
Is it OK?
No
Check point:
RF level check Yes
AS MAX check
PICK UP Perform lens

Is it OK?
cleaned? cleaning
No No
Yes Yes
D Replace the PICK UP

Check point:
Error rate check
Error rate check
PICK UP Perform lens

Is it OK?
cleaned? cleaning
No No
Yes Yes
Replace the PICK UP
E
Ckeck parts
Finished
other than PICK UP
DVH-P6050UB/XN/CN5
34
1 2 3 4
5 6 7 8
LD current check
Status: [Foucs closed] of TEST MODE
Mode: DVD A
No. Disc Check Point Threshold Remarks: LD current

1 GGV1025 DVDLD1 – VCC5_3 (mV) 10 – 65 (mA)
B
DVDLD1
VCC5_3
Status: [Foucs closed] of TEST MODE

Mode: CD
No. Disc Check Point Threshold Remarks: LD current

2 TCD-782 CDLD1 – VCC5_3 (mV) 10 – 60(mA)
CDLD1
VCC5_3
E
Notes: Please pay attention to the laser diode damage by static electricity.
DVH-P6050UB/XN/CN5
5 6 7 8
35
1 2 3 4
ASMAX check
ASMAX value shows the value of RF level.
A Status: [Foucs closed] of TEST MODE
No. Disc Check Point Threshold Remarks:

8 digits value of Only four last digits are
more than
1 GGV1025 ASMAX displayed according to
on display 0000 0600 the product.
8 digits value of Only four last digits is
more than
2 TCD-782 ASMAX displayed according to
on display 0000 0C00 the product.
In this case, the value is displayed for a split second.

When you tried to perform [FOCS CLOSE],
the display will charge automatically in the following order.
[1FFF0000]->[FEMAX]->[FE MIN]->[AS MAX]->
[ENV MAX]->[FE normal]->[Spindle gain]->
C [TEMAX]->[TEMIN] ->[20000000]
Watch carefully the value of ASMAX.
Error rate check

Status: [Tracking Closed] of TEST MODE
No. Disc Check Point Threshold Remarks:

less than
1 GGV1025 ID: 40000
1.000E-03
less than
D 2 GGV1025 ID: 200000
1.000E-03
less than
3 TCD-782 ID: HOME Position
2.500E-03
DVH-P6050UB/XN/CN5
36
1 2 3 4
5 6 7 8
5.3 DIAGNOSIS FLOWCHART
BACK END section flow A
START
Is VDD5
Can the NO Standby OK? NO (VCC33, VCC12)
power supply
playback Execute check 1. voltage OK?
start? Execute NO
check 2.
YES YES YES
B
Does the NO Is the image NO NO Reset OK?
operation Is the sound
in error? in error? Execute check 3.
NO take time?
YES YES YES YES
Is the life of flash Is AVCC5 Is AVCC5

NO NO NO Is SDRAM NO Is VSENS
memory OK? voltage OK? voltage OK? IF OK? OK?
Conduct check item 12. Execute check 8. Execute check 8. Execute check 6. Execute check 4.
NO
YES
YES YES YES YES
NO Is the video Is DACCLK Is VD8, VCC5 Is 27 MHz

NO NO power supply NO OK?
circuit OK? normal? C
Execute check 11. Execute check 9. voltage OK? Execute check 5.
Execute check 7.
YES YES YES

YES
Is the audio Go to FE
NO section check. Replace the unit.
circuit OK?
Execute check 10.
YES
Go to FE
section check.
D
Repair the
defective part.
Go to FE
section check.
NO
Normal?
YES FE section check.
END
NO Go to FE related E
Is FE section
normal? repair process.
YES
Replace the unit.
NO
Normal?
YES
F
END
DVH-P6050UB/XN/CN5
5 6 7 8
37
1 2 3 4
Check 1: Standby OK?

A
<Check> Check the voltage at the “STANBY” test point while the power is on.
Use the “DGND1” test point at the reference.
NO. Check point Module No. Specification value Unit

1 STANBY-DGND1 ALL VCC33 V- V
0.6 V or more
B
Side A
C DGND1
STANBY
Fig 1.1: STANBY check point
DVH-P6050UB/XN/CN5
38
1 2 3 4
5 6 7 8
Check 2: Is VDD5 (VCC33, VCC12) power supply voltage OK?

A
VDD5 IC1401 FLASH power supply (Data)

F.E. driver control system
IC1402 FLASH power supply (Program)
IC1481 SDRAM power supply
VCC33 (= 3.3 V ) IC1501 DVD-LSI power supply
IC1007
VDD5
3.3 V output regulator
IC1008 VCC12 (= 1.2 V ) IC1501 DVD-LSI power supply
DC/DC converter
1.2 V output
Fig 2.1: Power supply configuration B
<Check> Check the voltage at the “VDD5_3, VCC33_3 and VCC12_1” test point while the power is on.

1 VDD5_3 - DGND1 ALL 5.0 ± 0.4 V
2 VCC33_3 - DGND1 ALL 3.3 ± 0.15 V
3 VCC12_1 - DGND1 ALL 1.2 ± 0.12 V
Side A
C
VDD5_3
VCC33
DGND1
D
VCC12_1
Fig 2.2: VDD5, VCC33, VCC12 voltage check points
DVH-P6050UB/XN/CN5
5 6 7 8
39
1 2 3 4
Check 3: Reset OK?

A
<Check> Check the voltage at the “XRES” test point while the power is on.

1 XRES-DGND1 ALL VCC33 × V
0.7 or more
Side A
DGND1
XRES
D Fig 3.1: RESET check point
DVH-P6050UB/XN/CN5
40
1 2 3 4
5 6 7 8
Check 4: Is VSENS OK?

CN1901 A
HOST I/F
IC1501
VD8 IC1003 VSENS DVD-LSI
detection IC
IC1007
VCC33
VDD5 Regulator
IC1008
DC/DC converter VCC12
B
STANBY
XRES
Fig 4.1: Power supply configuration and VSENS
<Check> Check the voltage at the “VSENS” test point while the power is on.

1 VSENS - DGND1 ALL VCC33 × 0.7 V
or more
C
Side A
DGND1
VSENS
Fig 4.2: VSENS check point
DVH-P6050UB/XN/CN5
5 6 7 8
41
1 2 3 4
Check 5: 27 MHz Normal?

A <Outline> Each clock is created inside the IC1501 using the 27 MHz master crystal oscillator (X1501).
IC1501
DVD-LSI
X1501 OSCO
27 MHz
crystal OSCI
VCC33 VCC12
Fig 5.1: Clock configuration
<Check method> Turn the power on, and check with DGND being the reference.
In case of NG, check the applicable line, periphery of IC1501,
soldering of the peripheral components and defective components.

27 MHz
C 2 IC1501 169pin ALL
± 50 ppm ppm
Specification
value
GND
Fig 5.2: Clock specification value
D Side A
E DGND1
IC1501 169pin
Fig 5.3: 27 MHz check point
DVH-P6050UB/XN/CN5
42
1 2 3 4
5 6 7 8
Check 6: Is SDRAM I/F OK?

A
<Outline> In order to secure the MPEG stream data as the buffer,
the capacity of communication I/F SDRAM between the LSI and the memory is 128Mbit.
Be careful as XCSM, XWE, XCAS, XRAS and XSCM of IC1481 are called differently in IC1501,
namely NCSM, NWE, NCAS, NRAS, NCSM.
IC MA0~11 IC1501
1481 MDQ0~31 DVD-LSI
SDRAM MCK
XWE (NWE)
XCAS (NCAS)
XRAS (NRAS)
B
XCSM (NCSM)
DQM0
DQM1
DQM2
DQM3
BA0
BA1
Fig 6.1: SDRAM I/F
DVH-P6050UB/XN/CN5
5 6 7 8
43
1 2 3 4
<Check> Check the conductivity at “check point 1” and “check point 2” without power.
In case of NG, check the soldering and defective components throughout the
“output t input” of the applicable section.
A
NO. Signal name Check point 1 Check point 2 Specification value

1 MA0 IC1481 25pin IC1501 16pin 56 ohm ± 5 %
B 9 MA8 IC1481 65pin IC1501 11pin 56 ohm ± 5 %
13 MDQ0 IC1481 2pin IC1501 237pin 56 ohm ± 5 %
C 21 MDQ8 IC1481 74pin IC1501 253pin 56 ohm ± 5 %
D
E 44 MDQ31 IC1481 56pin IC1501 28pin 56 ohm ± 5 %
45 MCK IC1481 68pin IC1501 234pin 0.17 ohm or lower
46 XWE IC1481 17pin IC1501 3pin 56 ohm ± 5 %
47 XCAS IC1481 18pin IC1501 4pin 56 ohm ± 5 %
48 XRAS IC1481 19pin IC1501 5pin 56 ohm ± 5 %
49 XCSM IC1481 20pin IC1501 6pin 56 ohm ± 5 %
50 DQM0 IC1481 16pin IC1501 255pin 56 ohm ± 5 %
54 BA0 IC1481 22pin IC1501 8pin 56 ohm ± 5 %
55 BA1 IC1481 23pin IC1501 10pin 56 ohm ± 5 %
F
DVH-P6050UB/XN/CN5
44
1 2 3 4
5 6 7 8
Side B
Check point 1 (IC1481)

C
Side A
Check point 2 (IC1501) Fig 6.2: SDRAM I/F check point
DVH-P6050UB/XN/CN5
5 6 7 8
45
1 2 3 4
Check 7: Is VD8, VCC5 power supply voltage OK?

A
VD8_1 F.E. driver system

DISC detection LED
VD IC1004 VCC5 (= 5.0 V ) Power supply

REG IC for PU
for VCC 5 V.
Fig 7.1: Power supply configuration
B
<Check> Check the voltage at the “VD8_1, VD and VCC5_1” test point while the power is on.
Use the “PGND3 and AGND1” test point at the reference.

1 VD8_1 - PGND3 ALL 8.0 ± 0.4 V
2 VD - PGND3 ALL 8.0 ± 0.4 V
3 VCC5_1- AGND1 ALL 5.0 ± 0.1 V
Side A
VD8_1
VD
AGND1
PGND3
VCC5_1
E Fig 7.2: VD8, VCC5 voltage check points
DVH-P6050UB/XN/CN5
46
1 2 3 4
5 6 7 8
Check 8: Is AVCC5 voltage OK?

A
IC1005 IC1801
VD AVCC5 (= 5.0 V )
REG IC Audio-DAC
for AVCC 5 V.
Fig 8.1: Power supply configuration
<Check> Playback DVD-REF-A1 TITLE 1 and check the voltage at the stylus.
Check with PGND and GNDAU being the reference.
NO. Check point Module No. Specification value Unit B

1 VD - PGND_3 ALL 8.0 ± 0.4 V
2 AVCC5 - GNDAU1 ALL 5.0 ± 0.1 V
Side A
VD
C
PGND3
GNDAU
AVCC5
Fig 8.2: VD8, AVCC5 voltage check points
DVH-P6050UB/XN/CN5
5 6 7 8
47
1 2 3 4
Check 9: Is DACCLK normal?

<Outline> DACCLK for Audio-DAC is created by IC1501 using the 27 MHz master crystal oscillator (X1501).
A
IC1501
X1501 DVD-LSI IC1801

27 MHz DACCLK Audio-DAC
crystal
VCC33 VCC12
Fig 9.1: Clock configuration
B
<Check method>
DVD: DVD-REF-A1 TITLE 1
CD: Playback a normal CDDA.
Common to all DVD-V compatible modules.
Check with DGND being the reference.
In case of NG, check the applicable line, the periphery of IC1501, soldering of the peripheral components and
defective components.
NO. Check point 1 (stylus) Media Specification value 1 Specification value 2 Specification value 3
1 DACCK DVD 2.0 V~VCC33 V DGND~0.8 V 36.8640 MHz±300 ppm
2 DACCK CD 2.0 V~VCC33 V DGND~0.8 V 33.8688 MHz±300 ppm
C Specification
value 1
Specification
value 2 Specification
value 3
GND
Fig 9.2: Clock specification value

Side A
D
F
Check point 2 (IC1501 172 pin)
Check point 1 (stylus)
Fig 9.3: 27 MHz, DACCLK check point
DVH-P6050UB/XN/CN5
48
1 2 3 4
5 6 7 8
Check 10: Is the audio circuit OK?

<Outline> The serial 3 lines digital output + DACCLK, output from DVD-LSI (IC1501), are converted to analog audio
A
signal at Audio-DAC (IC1801) and are output from the HOST I/F (CN1901).
Simultaneously, the analog MUTE signal is also output from DVD-LSI (IC1501) via the HOST I/F.
The digital audio signal (IECOUT), output from DVD-LSI (IC1501), is output via CN1852.
CN1901
HOST I/F
IC1501
DVD-LSI LRCK IC1801 LO
ADOUT3 Audio-DAC
SRCK RO
B
GNDAU
CN1852
IEC
Fig 10.1: Audio circuit

<Check method> Playback DVD-REF-A1 TITLE 2 CHAPTER 1 (48 k/16 bit 1 kHz 0 dB),
and check with DGND being the reference.
In case of NG, check the applicable line, periphery of major components as described in the above drawing,
NO. Check point 1 (stylus) Specification value 1 Specification value 2 Reference waveform C
1 ADOUT3 VCC33 V-0.6 V or higher 0.4 V or lower Waveform 1
2 SRCK VCC33 V-0.6 V or higher 0.4 V or lower Waveform 2
3 LRCK VCC33 V-0.6 V or higher 0.4 V or lower Waveform 3
Specification
Specification value 2
value 1
GND
D
Fig 10.2: Serial 3 lines specification value
Side A
SRCK E
LRCK
ADOUT3
Fig 10.3: Serial 3 lines check points

DVH-P6050UB/XN/CN5
5 6 7 8
49
1 2 3 4
The following checks shall be conducted using the following measurement circuits with GNDAU1 being the reference.
47 kohm 47 kohm
A
LO GNDAU1 RO
NO. Check point 1 (stylus) Specification value (rms) Reference waveform
4 LO 1 400 ± 150 mV Waveform 4
5 RO 1 400 ± 150 mV Waveform 4
B
Specification value is the root-mean-square value (rms).
Fig 10.4: Analog audio out (LO, RO) specification value.
Side A
LO
C
RO
GNDAU1
Fig 10.5: Analog audio out check point
DVH-P6050UB/XN/CN5
50
1 2 3 4
5 6 7 8
Check with DGND being the reference.

Check 2pin cord after connecting it to a jig, etc.
NO. Check point 1 (stylus) Specification value 1 Specification value 2 Reference waveform A
6 IEC VCC33 V-0.6 V or higher 0.4 V or lower Waveform 5
Side A
IEC
Fig 10.6: Digital audio signal (IECOUT) check point
DVH-P6050UB/XN/CN5
5 6 7 8
51
1 2 3 4
<Outline> At the time of 6ch digital out, the serial 6 lines output from DVD-LSI (IC1501) is output via CN1581.
Furthermore, at the time of ripping, the serial 3 lines digital output + SUBC, output from DVD-LSI (IC1501),
is output in 4 times speed via CN1851.
A
CN1851
ADOUT0/SUBC
IC1501 IC1851 buffer SW,
ADOUT1/BLKCK
LSI ripping or 6ch digital out.
ADOUT2/CLDCK
SRCK
LRCK
IC1852 buffer SW,
DATA
ripping or 6ch digital out.
MCKENA
B OUT
IN IC1853 buffer SW, IN
ripping or 6ch digital out.
RIPP
SBCK
BMUTE
EMPH
IEC/IPFLG
The signal at CN1851 for 6ch digital out/Ripping.

Pin No. Pin name 6ch digital out Ripping
23 SRCK SRCK SRCK
21 LRCK LRCK LRCK
19 AD0/SUBC ADOUT0 SUBC
17 AD1/BLK ADOUT1 BLKCK
15 AD2/CLD ADOUT2 CLDCK
13 AD3/DATA ADOUT3 DATA
11 IEC/IPFLG IEC IPFLG
D 9 - - -
7 SBCK - SBCK
5 BMUTE BMUTE -
4 MCKENA Low High
3 RIPP High Low
2 EMPH EMPH EMPH
Pins 1, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 are GNDD.
Fig 10.7: 6ch digital out/Ripping circuit
DVH-P6050UB/XN/CN5
52
1 2 3 4
5 6 7 8
Playback DVD-REF-A1 TITLE22 CHAPTER 1, and check with GNDD being the reference.
In case of NG, check the applicable line, the periphery of the major components in the drawing above,
soldering of the peripheral components and defective components. A
Check 24pin FFC after connecting it to a jig, etc.
NO. Check point 1 (stylus) Specification value 1 Specification value 2
7 SRCK VCC33 V-0.6 V or higher 0.4 V or lower
8 LRCK VCC33 V-0.6 V or higher 0.4 V or lower
9 ADOUT0 VCC33 V-0.6 V or higher 0.4 V or lower
12 IEC VCC33 V-0.6 V or higher 0.4 V or lower
13 MCKENA - VCC33 V x 0.3 V or lower
B
Rip common CDDA, and check with GNDD being the reference.
In case of NG, check the applicable line, the periphery of the major components in the drawing above,
Check 24pin FFC after connecting it to a jig, etc.
NO. Check point 1 (stylus) Specification value 1 Specification value 2
14 SRCK VCC33 V-0.6 V or higher 0.4 V or lower
15 LRCK VCC33 V-0.6 V or higher 0.4 V or lower
16 SUBC VCC33 V-0.6 V or higher 0.4 V or lower
17 BLKCK VCC33 V-0.6 V or higher 0.4 V or lower
18 CLDCK VCC33 V-0.6 V or higher 0.4 V or lower
19 DATA VCC33 V-0.6 V or higher 0.4 V or lower C
20 SBCK VCC33 V-0.6 V or higher 0.4 V or lower
21 RIPP - VCC33 V x 0.3 V or lower
Specification
value 1
GND Specification value 2
D
Fig 10.8: 6ch digital out/Ripping specification value
DVH-P6050UB/XN/CN5
5 6 7 8
53
1 2 3 4
Side A
SRCK
LRCK
B ADOUT3
C
Side B
ADOUT2
ADOUT1
ADOUT0
RIPP
MCKENA
SBCK
E
Fig 10.9: 6ch digital out/Ripping check point
DVH-P6050UB/XN/CN5
54
1 2 3 4
5 6 7 8
Check 11: Is the video circuit OK?

<Outline> Composite signal and component signal are output from DVD-LSI (IC1501), and are output from the A
HOST I/F (CN1901) via a buffer circuit.
CN1901
HOST I/F
IC1501 AVCC5
DVD_LSI Composite
Component Y
Component Cb Video buffer circuit
Component Cr NoMount COMPO
Video
DAC
section
B
Fig 11.1: Video circuit
<Checking method> Playback DVD-REF-A1 TITLE2 CHAPTER5 (WHITE 100%), and monitor COMPO signal with
an oscilloscope with GNDV1 (stylus) being the reference. Set the trigger mode to “TV trigger” and
the trigger line to “150 line”.
Check point 1 (stylus)
NO. Specification value Reference waveform
1 COMPO 1 000 mVpp ± 5 % Waveform 6
C
In case of NG, check the applicable line, the periphery of the major components in the drawing above, soldering of the
peripheral components and defective components.
PEAK
COMPO signal Reference Adjust this level within the

value
range of 1.0 ± 0.02 Vpp.
Color burst
Pedestal level
BOTTOM
Horizontal sync signal
Fig 11.2: Waveform for the case of composite white 100% output D
<Video level readjustment method>

In case the video composite output is outside of the specification value, readjust the level according to the method
described below.(Note : Units are exchanged, the video output is not adjusted. )
Turn the volume (VR1671) to adjust the video level within the range of 1.0 ± 0.02 Vpp.
The adjustment specification is 1.0 ± 0.02 Vpp.
CN1901
AVCC5 HOST I/F
IC1501 E
LSI Y Q1701(NoMount) Y
Video buffer circuit
Video Cb Q1702(NoMount) Cb
DAC Video buffer circuit
section
Cr Q1704(NoMount) Cr
Video buffer circuit
Fig 11.3: Video circuit (component)
DVH-P6050UB/XN/CN5
5 6 7 8
55
1 2 3 4
<Checking method> Playback DVD-REF-A1 TITLE2 CHAPTER19 (100% Color Bars), and monitor Y, Cb, and Cr
signal with an oscilloscope with GNDV1 (stylus) being the reference. Set the trigger mode to
“TV trigger” and the trigger line to “150 line”.
A
NO. Check point 1 (stylus) Specification value Reference waveform

2 Y 1 000 mVpp ± 5% Waveform 7
3 Cb 700 mVpp ± 5% Waveform 7
4 Cr 700 mVpp ± 5% Waveform 7
In case of NG, check the applicable line, the periphery of the major components in the drawing above, soldering of
the peripheral components and defective components.
PEAK
B
Y signal Specification value
BOTTOM
PEAK
Cb signal Specification value
BOTTOM
C
PEAK
Cr signal Specification value
BOTTOM
100% Color Bars signal
Fig 11.4 Waveform for the case of component 100% Color Bars output
Side A
D
COMPO
Cr
Cb
F
Fig 11.5: VIDEO signal check point
DVH-P6050UB/XN/CN5
56
1 2 3 4
5 6 7 8
Check 12:How to judge whether the flash memory has reached its life or not.
If the reaction to user operation is slow or operation is slow in general, there is a possibility that the flash memory A
has reached its life.
Make judgment regarding the flash memory life by looking at the display of the LD energizing time.
1.Let the LD energizing time displayed.

(Refer to the FE test mode for the method of displaying the LD energizing time.)
2.If the second digit from the left of the energizing time display is showing E,
such as “ E ”, it means that the flash memory has reached its life.
Example:
0E000BB8
DVH-P6050UB/XN/CN5
5 6 7 8
57
1 2 3 4
AUDIO VIDEO
A
[100% Color Bars]
CH1 : Y
CH1 : LO CH2 : Cb
CH1 : ADOUT3 CH2 : RO CH3 : Cr
Reference voltage: DGND2 1 V/div. 5 usec/div Reference voltage: GNDAU2 1 V/div. 500 usec/div Reference voltage: GNDV1 200 mV/div. 5 usec/div
G->
G-> G->
B
Waveform 1 Waveform 4
CH1 : SRCK CH1 : IECOUT

Reference voltage: DGND2 1 V/div. 5 usec/div Reference voltage: DGND2 1 V/div. 500 nsec/div
C
Waveform 7
G->
G->
[WHITE 100IRE]
CH1 : LRCK CH1 : COMPO
Reference voltage: DGND2 1 V/div. 5 usec/div Reference voltage: GNDV1 200 mV/div. 10 usec/div
G->
DVH-P6050UB/XN/CN5
58
1 2 3 4
5 6 7 8
5.4 ERROR CODE LIST
Method of reset A
UART ACC Source Eject Play Key
Error status OSD *1 *2 Meaning Off/On Off/On
It is a disc unable to be played back.
Media Error 00h A disc containing the unplayable Format only. X X X -
NON-PLAYABLE DISC
Open (No display) 10h Door open error * * * *
Read Error ERROR-02-99 20h Transfer start error X X X X
Focus Error(Focus Error
in mechanism set up) ERROR-02-90 21h Focus error X X X X
Focus error during set up

Surface Error ERROR-02-9E 22h (A focus has never been achieved with that X X X X
disc.)
Address not found
ERROR-02-80 23h Address not found. X X X X
(Invalid Track)
Spindle lock NG B
Spindle Lock ERROR-02-91 24h X X X X
(the disc cannot rotate)
Carriage home NG
Carriage HOME ERROR-02-92 25h (The pick up tries to return to carriage X X X X
home, but it cannot go back and stopped.)
ID/SUBCODE Read Error ID/SUBCODE Read Error (ID/SUBCODE
ERROR-02-94 26h X X X X
cannot be read due to scratch or stain.)
AV CHIP decode Error AV CHIP decode NG
ERROR-02-9A 2Ah X X X X
(AV chip cannot be decoded.)
AV CHIP Recovery NG
ERROR-02-9B 2Bh AV CHIP recovery NG X X X X
Error of PLAY BACK Mode Playback state error
ERROR-02-9C 2Ch X X X X
Status (An error due to software bug.)
Disc Data Error ERROR-02-9D 2Dh Disc Data NG X X X X
Temp Error Temperature protection circuit is High temperature
(In Case of High being activated. 30h (Playback is stopped because the pick up X - - -
C
Temperature) THERMAL PROTECTION IN MOTION temperature is 89 C or higher.)
No Disc Disc has not been inserted.
(including Disc loading (No display) 40h (Including Load in process or Eject in process.) * * * *
and ejecting)
Loading mechanism error
Loading_Mecha Error (No display) 50h X - X -
(The disc cannot be clamped.)
It is a protected disc. DRM error
DRM Error 70h - - X -
PROTECTED DISC (All music cannot be played back due to DRM.)
Region code is incorrect. Region code NG (Unable to be played back
Region code Error NG 90h - - X -
DIFFERENT REGION DISC due to incorrect mechanism region.)
It is a disc unable to be played back.
CPPM*3 Key Error *4 91h Key Error for playback - - X -
NON-PLAYABLE DISC
CPRM Key Error *7 93h Key Error for playback - - X -
NON-PLAYABLE DISC
Playback the illegally copied disc by DVD-A D
AWM*5 Error *4 (No display) *6 X X X -
(Mute the sound on the mechanism side.)
REQUEST error ERROR-02-A0 A0h REQUEST error X X X X
Failure in issuing read
ERROR-02-A1 A1h Failure in issuing the read command X X X X
command (chip dependent)
Adjustment of L0 is NG. ERROR-02-A2 A2h L0 adjustment is NG. X X X X
Adjustment of L1 is NG. ERROR-02-A3 A3h L1 adjustment is NG X X X X
LD system NG ERROR-02-A4 A4h LD system NG X X X X
Gain adjustment system NG. ERROR-02-A5 A5h Gain adjustment system NG. X X X X
Gain determining system NG. ERROR-02-A6 A6h Gain determining system NG. X X X X
Servo initial setting related items NG. ERROR-02-A7 A7h Servo initial setting related items NG. X X X X
Disc is not clamped yet. ERROR-02-A8 A8h Disc is not clamped yet. X X X X
Tracking system NG. ERROR-02-A9 A9h Tracking system NG X X X X
Media setting system NG. ERROR-02-AA AAh Media setting system NG X X X X
Focus Error ERROR-02-AB ABh JUMP over layers NG X X X X
Error of PLAY BACK E
ERROR-02-B0 B0h Navigation command error X X X X
Mode Status
Error of PLAY BACK
ERROR-02-B1 B1h Retry over X X X X
Mode Status
Undefined Error ERROR-FF-FF FFh Undefined error X X X X
X: Cancel the error by operation. -: Error is not cancelled by operation. *: No setting
*1 A content displayed on OSD. As for the items having multiple display patterns, the upper row is for the Japanese version Full GUI, and the lower row is for
the Touch Panel model and Full GUI (English version).
*2 A parameter of UART command, such as “receipt error notice”, that the DVD mechanism transmits.
*3 CPPM(Content Protection for Prerecorded Media) : A copyright protection technique used in DVD-A. The protection is realized by using the keys recorded
on the media and the device key held by the player.
*4 DVD-A compatible model only.
When an error has occurred, only the audio output will be muted but playback operation will continue. Furthermore, acceptance of the user operation will be
the same as usual.
*5 AWM (Audio WaterMark): Electronic watermark. Information on the copyright owner or CCI (copy control information) are recorded so that illegally copied
discs can be identified.
*6 Notice as an error status will not be given F
*7 CPRM(Content Protection for Recordable Media) : A copyright protection technique for digital contents used for re-writable DVD or memory card.
(DVD-VR model only)
DVH-P6050UB/XN/CN5
5 6 7 8
59
1 2 3 4
iPod error
A Message Cause Action

NO SONGS No songs in the iPod Transfer the songs to the iPod.
STOP No songs in the current list Select a list that contains the songs.
Disconnect the cable from the iPod. Once the
Communication failure iPod main menu is displayed, connect the cable
ERROR-19 again.
iPod failure
Reset the iPod.
ERROR-18 Old version of the iPod Update the iPod version.
N/A USB iPod failure Reset the iPod.
B
Old version of the iPod Update the iPod version.
ERROR-16 Disconnect the cable from the iPod. Once the
iPod failure iPod main menu is displayed, connect the cable
again.
Reset the iPod.
Turn the ignition switch OFF and ON.
Malfunction of iPod recognition IC.
C Check if the connection cable for the iPod

shorted out. After checking, switch the ignition
CHECK USB iPod is not charged but operates correctly.
key OFF and ON, or disconnect the iPod and
connect again.
USB error
Message Cause Action

No songs in the USB device Transfer the songs to the USB device.
D NO AUDIO USB memory with security enabled is Follow the USB memory instructions to disable
connected the security.
The connected USB device contains WMA

TRK SKIPPED Play an audio file not protected by DRM.
files that are protected by DRM
All the files in the USB device are protected Transfer the songs not protected by DRM to
PROTECT
by DRM the USB device.
The connected USB device is not supported Connect a USB device that is compliant as a
N/A USB
by this unit Mass Storage Class.
E
The USB connector or the USB cable is
Confirm the USB connector or the USB cable.
short-circuited
CHK USB
The connected USB device consumes more
Confirm the USB device.
than 500 mA (max. allowable current)
Turn the ignition switch OFF and ON.
Disconnect the USB device, and connect it
again.
ERROR-19 Communication failure
Change to a different source. Then, return to
the USB.
F
USB device is not formatted with FAT16 or
ERROR-23 Format the USB device with FAT16 or FAT32.
FAT32
DVH-P6050UB/XN/CN5
60
1 2 3 4
VIDEO INPUT VIDEO OUTPUT
ANTENNA
5
5
USB
1 2 3 4
1. VBUS
2. D-
3. D+
4. GND
6
6
REAR FRONT
OUTPUT OUTPUT
5.5 CONNECTOR FUNCTION DESCRIPTION
DVH-P6050UB/XN/CN5
7
7
OPTICAL
OUTPUT
SUBWOOFER IP-BUS INPUT

OUTPUT 1. BUS1
1. B.UP 9. RL- 2. GND
2. GND 10. FL- 3. GND
3. B.G.SENS 11. RL+
AUX INPUT 4. NC
4. B.REM 12. FL+ 2 4 6 8 10 1214 16 8 9 10 11 5. BUS2
5. ACC 13. RR-
1 3 5 7 9 1113 15 5 6 7 6. GND
6. N.C 14. FR-
1 2 3 4 7. BUSL1
7. TELM 15. RR+
8
8
16. FR+
8. ASENB1
8. VGND
9. BUSR1
10. BUSR2
11. BUSL2
61
E
A
D
C
F
B
1 2 3 4
6. SERVICE MODE
6.1 DISPLAY TEST MODE
A
The ACC and Back UP turn off and turn on while pushing the RDM+EQ key.
To the display test mode.
The ACC and back up turn off and turn on

while pushing the RDM+EQ key.
B
System version display
RDM+EQ
iPod attestation confirmation display
RDM+EQ
ROM Correction version display
RDM+EQ
USB version display
C RDM+EQ
Usual display test mode display
RDM+EQ
Display STOP
RDM+EQ
Display test mode all lighting
RDM+EQ
Display test mode all turn off
D
RDM+EQ
System version display
When System version is displayed,

the PD number, the system microcomputer version, and the CWW number is displayed.
E
Example) For PEG123A VER1.05 CWW1111
1 2 3A 1 0 5 C1 1 1 1
DVH-P6050UB/XN/CN5
62
1 2 3 4
5 6 7 8
6.2 DVD TEST MODE
Image of the test mode.

Legend: … Key operation A
Remote Control Assy SW: DVH
… Operation state
ACC + Back up
turn OFF / ON … The content displayed on the DVD mechanism (video only)
Start of the test mode.
while pushing 8 characters data is sent to the product side (HOST) by UART communication.
the RDM + LIST key
TEST [Note] Higher level 4 characters only. Lower level 4 characters are spaces.
(1) (2) (3) (4)
FE test selection EDC1 test selection EDC2 test selection LD power on time
mode selection
B
Hereafter, to FE test Hereafter, to EDC1 Hereafter, to EDC2 Hereafter, to LD power on
mode image. test mode image. test mode image. time mode image.
[Note] In order to move on to another test after selecting a test (FE/EDC1/EDC2), it is necessary to restart the DVD mechanism in the test mode.
Image of the front end test mode.

Legend: … Key operation
… Operation state
… The content displayed on the DVD mechanism (video only)
8 characters data is sent to the product side (HOST) by UART communication.
FE test mode
0 x 00 0000
(1) (2) (3) (4) (5) EJECT

Power on FE offset coefficient Disc type DVD1 Disc type DVD2 Disc type CD Disc type CD-RW EJECT
TE offset coefficient layer layer
AS offset coefficient
0FFF 0000 ENV offset coefficient
TG offset coefficient 0000 0000 0100 0000 0200 0000 0300 0000
DBAL coefficient
VIN1 offset cancel value
VIN5 offset cancel value D
1 x 00 0000
(1) (2) (3),(4) (5) (6) (8)
F close F search CRG+/- LD-ON/OFF CRG_HOME Power_OFF
S curve
measurement
1FFF 0000 Activates while the key When LO-ON: 1100 0000 1D00 0000
1A00 0000 is being pressed. When LD-OFF: 1000 000
(2) 1B00 0000 : CRG+
1C00 0000 : CRG-
F search
E
1100 0000
[Note] If no action is taken for approximately 10 seconds after LD-ON, it will become LO-OFF automatically.
If F close is selected during LD-OFF, it will become an error.
During focus search (S character measurement mode), too, safety regulation applies if LD_OFF is not selected
Focus close state within 10 seconds. Therefore, even if focus search is selected after LD-ON, it will become LD-OFF after 9 seconds.
FEMAX level In order to F close after focus search (S character measurement mode), set to Power_OFF first then power on again
FEMIN level before F close.
ASMAX level
ENVMAX level
FE normalization coefficient
Spindle gain coefficient
TEMAX level indication
TEMIN level indication
(2)
a b
DVH-P6050UB/XN/CN5
5 6 7 8
63
1 2 3 4
a b
(2)
2 x 00 0000
A
(1) (2) (3),(4) (8)
Tracking balance Focus Jump CRG +/- Power_OFF
When L0 layer: 2000 0000 It operates while the key

2FFF 0000 When L1 layer: 2100 0000 is being pressed.
2B00 0000 : CRG+
TBAL coefficient (layer 0) 2C00 0000 : CRG-
TBAL coefficient (layer 1)
TE normalization coefficient (layer 0)
TE normalization coefficient (layer 1)
Off track adjustment result
3000 0000
(1) (3),(4) (5) (8)

Tracking close CRG +/- RF level value Performed including the tracking close processing. Power_OFF
3FFF 0000 It operates while the key 3FFF 0000

B is being pressed.
3B00 0000 : CRG+
3C00 0000 : CRG- Tracking close state FBAL coefficient (layer 0)
FBAL coefficient (layer 1)
Focus gain coefficient (layer 0)
Tracking gain coefficient (layer 0)
AS normalization adjustment value (layer 0)
5000 0000
(1) (2) (7) (8)

RF level value Error rate
indication start measurement T.OPEN Power_OFF
Error rate
RF level is informed Focus gain coefficient (layer 0) To (2)
every 500msec. Focus gain coefficient (layer 1)
C Tracking gain coefficient (layer 0)
(1)
RF level value AS normalization adjustment value (layer 1)
indication end

Tracking close state
4000 0000 AS normalization adjustment value (layer 1)
D 4 x 00 0000
(1) (2) (5) (6) (3),(4) (7) (8)

Error rate Playback speed T.Jump+/- Power_OFF
measurement switching Focus Jump ID Search T.OPEN
Error rate Jump+ : 4B00 0000

Focus gain coefficient (layer 0) When L0 layer: 4x00 0000 4A00 0000 Jump- : 4C00 0000 To (2)
Focus gain coefficient (layer 1) DVDX1.3~ When L1 layer: 4x00 0000
Tracking gain coefficient (layer 0) 1.6CAV (1)-(4) (3)
Tracking gain coefficient (layer 1) CDX4CLV: Track number
4x00 0000 ID designation designation
ID display Track number

indication The higher 2 digits of the designated ID are the value showing the test state.
(5) (5) The lower 6 digits show the ID.
Example) If 300000 is desired to be designated as the ID, designated ID: 4A03 0000.
Search start Jump start
Error occurrence
E The number for designation of the track number shall be selected from the track numbers previously prepared.
Switch to cyclic by (3). Fix by (4).
Error display For CD: Tracks 1, 4, 10, 11 and 32
L0 layer DVD X 1.3~1.6CAV, CD X 4CLV :4000 0000
For DVD: Tracks 1, 4, 10, 11, 32, 64 and 100
L1 layer DVD X 1.3~1.6CAV :4100 0000
(8)
Change the method for ID address designation.
Power_OFF Designation of digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4). Fix by command (5).
Error occurrence at Power_OFF
[Note] If an error occurs at Power_OFF, reset cannot be made. In such a case, it is necessary to turn the power off and start the test mode once again.
Error display
DVH-P6050UB/XN/CN5
64
1 2 3 4
5 6 7 8
Legend:
… Key operation
EDC. Image of the test mode
… Operational state A
EDC1/2 test mode [Note] Image is the same for both EDC1 and EDC2.
0000 0000
EJECT operation
[Note] Eject can be effected any time during the EDC test mode.
(1) (2)
Layer 0 selection Layer 1 selection
Eject
B
0000 0000 0100 0000 Test mode Eject
1003 0000 1103 0000

After completion of EJECT operation
(1)-(4)
ID designation
Layer 0: 10** ****

Layer 1: 11** ****
[Note] ** **** is the ID designation value
(5)
C
EDC1/2 start
Layer 0: 20** ****

Layer 1: 21** ****
[Note] ** **** is the present ID designation value
**** **** [Note] The display is updated at 0.5 seconds interval until 0/1 layer is selected or Eject is effected.
[Note] **** **** is the present ID designation value
Image of the LD power on time mode.

Legend: … Key operation
… Operational state
LD power on time mode D
0000 0000
Not for service use
(1) (2) (5) (6)
CD LD power on DVD LD power on CD LD power on DVD LD power on
time indication time indication time setting time setting
10** **** 20** ****

[Note] ** **** is the CD LD [Note] ** **** is the DVD LD 30** **** 40** ****
power on time. power on time. [Note] ** **** is the setting time. [Note] ** **** is the setting time.
(1)-(4) (1)-(4)
Setting time (8) Setting time (8)
designation designation E
(5) (5)
Setting time Setting time

registration registration
10** **** 20** ****

[Note] ** **** is the CD LD [Note] ** **** is the DVD LD
power on time. power on time.
[Method of setting time designation]

Designate the digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4).
Fix by command (5). Cancel by command (8).
F
[Note] If the power on time is 999999 hours or more, it is always reported as 999999 hours.
[Note] If the power on time is “*E** ****”, the value may not be correct due to the life of the flash memory.
DVH-P6050UB/XN/CN5
5 6 7 8
65
1 2 3 4
7. DISASSEMBLY
- Removing the Keyboard Unit (Fig.1,2)
A
Remove the Knob Unit.(Fig.1) Knob Unit
1 Remove the six screws.(Fig.2)

Cover Detach Grille Assy Fig.1
Remove the Cover
and then remove the Keyboard Unit. 1
1 1
1 Fig.2
B 1 1
- Removing the Holder, Panel and Case (Fig.3)

Take off the pick of left and right
and then a Holder slide to the arrow course.
Remove the Panel.
Remove the Case. Fig.3

C
Panel Holder Pick Case
- Removing the Panel Unit (Fig.4,5,6,7)

Panel
Assy
1 Remove the two screws.(Fig.4,5)
1 1
Push the place of the arrows
and then remove the Panel Assy.(Fig.4,5)
Fig.4 Holder Fig.5
D 2 Remove the two screws.(Fig.6)
2 2
Remove the Holder
and then remove the Panel Unit.(Fig.7)
Fig.6 Panel Unit Fig.7
- Removing the DVD Mechanism Module (Fig.8)
E 1 Remove the four screws. 1

1
Disconnect the cable

and then remove the DVD Mechanism Module.
Fig.8
1
F
DVD Mechanism Module
DVH-P6050UB/XN/CN5
66
1 2 3 4
5 6 7 8
- Removing the Tuner Amp Unit (Fig.9,10)
While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.
Holder A
Remove the screw

1 and then remove the Holder.(Fig.9) 1
Fig.9
Tuner Amp Unit

2 Remove the two screws.(Fig.10)
Straighten the tabs at three locations indicated 3 B

3 3
and then remove the Tuner Amp Unit.
(Fig.10)
2
2
C
Fig.10
DVH-P6050UB/XN/CN5
5 6 7 8
67
1 2 3 4
- How from grille to remove plate button

A While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.
There are six hooks to remove.
The hook in six places in total is removed by the thin one such as tweezers.
F
* The hook breaks when forcibly removing.
DVH-P6050UB/XN/CN5
68
1 2 3 4
5 6 7 8
- How to hold the mechanism section (Fig 1)

A
1. Hold the main frame and the top frame.
2. As the mechanical strength of the front part of the top frame is not strong, do not hold this part.
3. Do not touch the switches provided on the top face of the mechanism section.
4. Be careful not to pull the flexible PCB on the side face.
Fig 1
Do not touch this part. Do not touch this part.

C
Do not touch this part.
- How to remove the module PCB (Fig 2, Fig 3)

1. Put the mechanism section in locked state (disc load standby position).
2. Hold the mechanism module with its top face down.
3. Make the lands at 2 locations on the pick up flexible PCB short.
4. Disconnect the connectors of the pick up flexible PCB and the SPDL flexible PCB.
(Be sure to disconnect the connectors as the flexible PCB will be damaged if the PCB is removed without removing
the flexible PCB.) D
5. Remove the solder joint of the lead wire of the load motor and the clamp SW.
6. Remove the two screws, and then remove the module PCB.
(Lift up point A slightly and remove it toward B direction. Be careful as the point C is connected with a flexible PCB.)
7. Disconnect the connector of the 8-12 detection flexible PCB from the PCB.
Fig 2
Module PCB
Short E
B
Connector Connector
(pick up flexible) (8-12 detection flexible)
Solder land
(load motor, lead wire of the clamp SW.) Connector (SPDL flexible) C F
A Fig 3
DVH-P6050UB/XN/CN5
5 6 7 8
69
1 2 3 4
- How to remove the CRG motor assy (Fig 4)

1. Remove the module PCB according to the instructions in “How to remove the module PCB”.
A 2. Remove the Mylar tape.
3. Remove the flexible PCB of the CRG motor from the connector of the spindle motor.
4. Remove the two screws, and then remove the CRG motor assy.
Set screw (CRG) CRG motor assy Set screw (CRG)
Feeding screw
PU rack
Mylar tape
Fig 4
C - How to remove the PU unit (Fig 5)
1. Remove the module PCB according to the instructions in “How to remove the module PCB”.
2. Hang the main shaft holding spring to the CRG chassis temporary hanger.
3. Remove the CRG motor assy according to the instructions in “How to remove the CRG motor assy”.
4. Remove the holding plate spring of the main shaft.
5. While lifting up the tip of the pick up rack, slide the main shaft, and remove the PU unit.
(Note) When mounting the PU unit again, make sure to do the adjustments of the devices mounted thereon
according to the descriptions of the service manual. Furthermore, make sure to hang the main shaft
holding spring permanently.
Holding plate spring Main shaft
D
PU unit
Main shaft holding spring
Sub shaft
Fig 5
CRG chassis temporary hanging section
F
Temporary hanging Permanent hanging
DVH-P6050UB/XN/CN5
70
1 2 3 4
5 6 7 8
8. EACH SETTING AND ADJUSTMENT

8.1 DVD ADJUSTMENT
A
If the reference voltage is connected to GND by mis-

1) Precautions take, turn the regulator OFF immediately, or turn the
This product uses 5 V and 3.3 V as standard voltages. power OFF.
The electrical potential that is the reference for signals, Remove the filters and wires used for measurements
is not GND, but VREF (approximately 2.2 V) and VHALF only after the regulator has been turned OFF.
(approximately 1.65 V) . After the power supply is turned on, regulator ON the
During product adjustments, if the reference voltage is following adjustment and measurement are promptly
mistakenly taken as GND, and a grounding contact is done.
made, not only would it be impossible to measure the Whenever the product is in the test mode, the software
accurate electrical potential, but also the servo motor B
will not take any protective action. For this reason,
would malfunction, resulting in the application of a special care should be taken to make sure that no
strong impact on the pick up. The following precaution- mechanical or electrical shock could be applied to the
ary measures should be strictly adhered to, in order to product when taking measurements in the test mode.
avoid such problems. Whenever the EJECT key is pressed to eject the disk,
The reference voltage and GND should not be confused no other keys, other than the EJECT key, should be
when using the minus probe of a measurement device. pressed until the disk eject action has been complet-
When an oscilloscope is being used special care should ed.
be taken to make sure that the reference voltage is not Press the EJECT key only after the disk has stopped
connected to the probe of ch1 (on the minus side), completely.
while the probe of ch2 (on the minus side), is connected If the product hangs up turn the power OFF immedi-
to GND. Further, since the body frame of most mea- ately. C
surement devices have the same electrical potential as Laser didoes may be damaged, if the volume switch for
the minus side of the probe, the body frame of the mea- the laser power adjustment of the pick up unit, is turned.
surement device should be set to floating ground.
Attention)
Test mode starting procedure
ACC + Back up OFF-ON while pressing
the RDM and LIST keys together.
Test mode stopping procedure
Reset or ACC OFF-ON.
DVH-P6050UB/XN/CN5
5 6 7 8
71
1 2 3 4
- SKEW adjustment
A
When one of the following replacements has taken place, SKEW adjustment for the pick up will be required.
(1) Replacement of the pick up unit
(2) Replacement of the spindle motor
(3) Replacement of the carriage chassis
(4) Replacement of the main shaft of the pick up unit
(5) Replacement of the sub shaft of the pick up unit
Measurement equipment and tools/jigs: Oscilloscope

Driver for SKEW adjustment t TORX driver (T2) (GGK1095)
Bond for fixing the SKEW (GEM1033)
Bond for locking the screw (Locking agents(1401M : produced by THREE BOND))
Disc used: GGV1025

B
Measurement reference: AGND2
Measurement point: RF
Connection drawing
DVD core unit
C
RF
AGND2
Enlargement
Oscilloscope
-3
Symptom in case the adjustment is not adequate: Worsening of the error rate 10
(Normally 10-4 or less.)
Large RF jitter
RF waveform distortion
Tracking drawing/Unstable servo
* Caution: Do not look into the laser light during adjustment.

F
DVH-P6050UB/XN/CN5
72
1 2 3 4
5 6 7 8
There are two adjustment methods: one in which adjustment is performed monitoring RF waveform with an oscilloscopes
(method 1), and another in which adjustment is performed checking the numerical value of RF level with OSD (method 2).
Adjustment procedures are described below, but please refer to the section of service mode for how to start the test
A
mode and the operation procedures therein.
Replacement of PU Unit
For replacement of PU unit, refer to "Disassembly - How to Remove PU Unit."
After mounting PU unit, roughly adjust the skew screw so that the outer periphery without PU becomes horizontal
to CRG chassis.
Skew adjustment screw
Adjustment Procedure:
1. Connect to the jigs (refer to jig connection diagram) to enable the adjustment of pickup, and turn over DVD
C
mechanism module.
To prevent the disc from being scratched as it is turned over, first place a coin having the thickness of about
1.5 mm on the desk, and turn over and set so that the part “ ” shown in the figure comes right above the coin.
2. In case of method 1:
Referring to the connection diagram, connect an oscilloscope so that RF signal can be monitored using AGND2 as
the reference.
RF
E
AGND2
In case of method 2: Oscilloscope

There is no need for setting equipment. Please go on to step 3.
F
DVH-P6050UB/XN/CN5
5 6 7 8
73
1 2 3 4
3. Turn on the power in the test mode, and load the adjustment disc (GGV1025).
A
4. From ServMecha , select DVD-1 layer in FE Test Mode (Front End Test Mode).
(For the details of the test mode, refer to ServMecha in the test mode menu in "6.2 DVD Test Mode")
5. Select Power On, and after the automatic offset adjustment is completed, move the pickup to the inner
periphery (CRG-Home).
After turning on LD by selecting LD ON/OFF, select Focus Close to close the focus.
6. After the automatic adjustment is completed in FE Test Focus Close screen, select T.Bal.
After the automatic adjustment, select Tracking Close to close the tracking.
B
7. Use ID Search to perform middle periphery (ID: 100000) search to move PU to the middle periphery.
Explanation of ID Search
ID: 4A000000
[Example]
To search ID: 40000, select [2] Cursor Left and press [Enter] for 5 times to move
the cursor to the 5th digit, and select [3] Cursor Up and press [Enter] for 4 times.
When the display is changed to ID: 40000, select [5] Start ID Search and press [Enter].
* If Search operation is failed, please restart from the top menu of ServMecha in the test mode.
C
8. In case of method 1:
Please go on to step 9.
In case of method 2:
Perform all automatic adjustments after Tracking Open once, and then close the tracking with the command that is
available for RF display.
DVH-P6050UB/XN/CN5
74
1 2 3 4
5 6 7 8
9. Using torx driver (T2) (GGK1095) ,

Turn the skew adjustment screw A slightly while monitoring RF waveform level in the oscilloscope and set the level
A
to the maximum.
At the middle periphery of pickup, turn the skew adjustment screw B slightly and set the level to the maximum.
At the middle periphery of pickup, turn the skew adjustment screw A slightly again and set the level to the maximum.
(Adjustments should be performed in the order of A, B, A, and please make sure each adjustment is completed as
the screws turned to the right.)
Turn the skew adjustment screw A slightly while monitoring RF level in OSD and set the level to the maximum.
At the middle periphery of pickup, turn the skew adjustment screw B slightly and set the level to the maximum.
At the middle periphery of pickup, turn the skew adjustment screw A slightly again and set the level to the maximum.
(Adjustments should be performed in the order of A, B, A, and please make sure each adjustment is completed as
the screws turned to the right.) B
B
A
A
C
[Criterion for Skew Adjustment OK]
(DVD) Search inner periphery (ID: 40000) and outer periphery (ID: 200000), and respective error rate should be
less than 1.000E - 3. If this is not satisfied, start over from step 9.
(Disc used: GGV1025)
(CD) Conduct a search after moving to the home position by CRG HOME, the error rate should be less than
2.500E - 3. If this is not satisfied, start over from step 9.
(Disc used: TCD-782)
D
* If the error rate does not fall within the abovementioned range by method 2, start over by method 1.
10. In FE Test Mode screen, after confirming the disc is stopped by Power OFF, eject the disc by Disc Eject.
DVH-P6050UB/XN/CN5
5 6 7 8
75
1 2 3 4
11. Apply adhesive agent for fixing the skew, and lock the screws.
SKEW adhesive locations(GEM1033) RAD-SKEW adhesive locations PU case
D
Adhesive application locations
C
C
E
B
Sheet metal (yoke base) section Resin (suspension support) section
PU case
TAN-SKEW adhesive locations
Sheet metal (yoke base) section
D&E Cross section of R-SKEW adhesive locations.

* Caution: Make a cross link to both the resin section
and the sheet metal section.
C
Adhesive application locations

* Caution: Make a cross link to both the case section and the sheet metal section.
Screw locking adhesive location(1401M : produced by THREE BOND)

D
Screw locking adhesive location

Apply the locking agent for more than half of the screw head
circumference.
* Caution: The locking agent shall not overflow to outside of
the PU case.
DVH-P6050UB/XN/CN5
76
1 2 3 4
5 6 7 8
Precautions in handling the PU.
* Caution: Do not touch the shaded section in the drawing below. A
RF level adjustment section
Do not touch the optical parts.

Do not touch the springs.
Hologram (be careful for the static electricity)
GRT adjustment section
DVH-P6050UB/XN/CN5
5 6 7 8
77
1 2 3 4
8.2 TUNER AMP UNIT ADJUSTMENT
•Adjustment Point ACC

BACK UP +14.4 V
DC Regulated
A GND GND Power Supply
TUNER AMP UNIT(SIDE A) CORD ASSY
CN751
15 13 11 9 7 5 3 1
16 14 12 10 8 6 4 2
VIDEO
CN281
1
B VR571
TC501
75 70 65 60 55
15 10 5 1
50
20
80
60
45
35 25 15 5 1
25
IC504
85
55
40
CN101 30 IC601
90
35
40 30 20 10 50
35 40 45
95
30
100
1 5 10 15 20 25
15 10
C IC1101
1 5
DD
1
VR1101
TUNER AMP UNIT(SIDE B)
GND1
D
VOUT
MSV
DD8V
DD5V
DVH-P6050UB/XN/CN5
78
1 2 3 4
5 6 7 8
DC-DC CONVERTER FREQUENCY ADJUSTMENT
No. Specification Measurement point Adjustment point Measurement condition

A
(Adjustment Item)
1 370 ± 5 kHz DD VR1101 DD8V-GND1 : 36 ohm(more than 1.8 W)

(Frequency Counter) DD5V-GND1 : 10 ohm(more than 1.2 W)
* DC-DC converter frequency adjustment should be adjusted under playing DVD.
VIDEO LEVEL ADJUSTMENT
No. Signal input Input signal Input level Measurement Specification Adjustment
point point point B
1 MSV Composite signal 1 Vp-p VOUT 1 Vp-p VR571

White 100 % (100IRE) (75 ohm Receipt) *1
*1 : (75 ohm Receipt) which is a spec. In a certain case, please adjust

with the value lowered to the standard value side 75 ohm.
OSD DRAWING AREA ADJUSTMENT
No. Source Output signal Specification Adjustment Remarks

at adjustment point C
1 TUNER Source plate of Adjust to bring the source TC501 Adjust by displaying
TUNER plate to the screen center. such as on AVX-7650.
Adjusted by TC501
Source plate
D
Circumference of
monitor liquid crystal
E
AVX-7650
DVH-P6050UB/XN/CN5
5 6 7 8
79
1 2 3 4
8.3 PCL OUTPUT CONFIRMATION
A
- PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode cancelled),
shift the TESTIN (IC601 Pin 86) terminal to H.The clock signal is output from the PCL (IC601 Pin 37).
The frequency of the clock signal is 468.750 KHz that is one 32th of the fundamental frequency.
The clock signal should be 468.750 kHz ( ± 19 Hz).
If the clock signal out of the range, the X’tal (X601) should be replaced with new one.
DVH-P6050UB/XN/CN5
80
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
81
1 2 3 4
9. EXPLODED VIEWS AND PARTS LIST

NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
The > mark found on some component parts indicates the importance of the safety factor of the part.
A
Therefore, when replacing, be sure to use parts of identical designation.
"
Screw adjacent to mark on the product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
9.1 PACKING
DVH-P6050UB/XN/CN5
82
1 2 3 4
5 6 7 8
(1) PACKING SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 Cord CDE6765 16 Polyethylene Bag CEG1227

2 Cord Assy CDE7321 17 Sub Unit Box CHG5195
A
3 Cord Assy CDP1020 18 Unit Box See Contrast table(2)
4 Cord Assy CDP1040 19 Contain Box See Contrast table(2)
5 Screw Assy CEA3849 20 Protector CHP2546
6 ••••• 21 Protector CHP2797

7 Screw CBA1650 22 Protector CHP2798
* 8 Polyethylene Bag CEG-127 23 Protector CHP2812
9 Screw CRZ50P090FTC 24-1 Owner's Manual See Language table(3)
10 Screw TRZ50P080FTC 24-2 Installation Manual See Contrast table(2)
11 Polyethylene Bag CEG1160 * 24-3 Warranty Card See Contrast table(2) B

12 ••••• 24-4 Caution Card CRP1310
13 ••••• 24-5 Polyethylene Bag CEG1116
14 Handle CND3707 25 Remote Control Assy CXC7605
15 Bush CNV3930 26 Case Assy QXA3049
(2) CONTRAST TABLE

DVH-P6050UB/XN/CN5, DVH-P6050UB/XN/RC, DVH-P6050UB/XN/RD
and DVH-P6050UB/XN/RI are constructed the same except for the following:
Mark No. Description DVH-P6050UB/XN/CN5 DVH-P6050UB/XN/RC DVH-P6050UB/XN/RD DVH-P6050UB/XN/RI
C
18 Unit Box CHG6516 CHG6513 CHG6514 CHG6515
19 Contain Box CHL6516 CHL6513 CHL6514 CHL6515
24-2 Installation Manual CRB2666 CRD4327 CRD4328 CRD4329
24-3 Warranty Card ARY7046 Not used Not used Not used
(3) Owner's Manual Language

DVH-P6050UB/XN/CN5 DVH-P6050UB/XN/RI
Mark Part No. Language Mark Part No. Language
CRB2665 Simplified Chinese CRB2659 English
CRB2664 Arabic
D
DVH-P6050UB/XN/RC DVH-P6050UB/XN/RD
Mark Part No. Language Mark Part No. Language
CRB2659 English CRB2659 English
CRB2660 Traditional Chinese CRB2662 Spanish(Espanol)
CRB2661 Korean CRB2663 Portuguese(B)
(4) Installation Manual Language

Mark Part No. Language
CRB2666 Simplified Chinese
CRD4327 English, Traditional Chinese, Korean E
CRD4328 English, Spanish(Espanol) , Portuguese(B)

CRD4329 English, Arabic
DVH-P6050UB/XN/CN5
5 6 7 8
83
1 2 3 4
9.2 EXTERIOR(1)
DVH-P6050UB/XN/CN5
84
1 2 3 4
5 6 7 8
EXTERIOR(1) SECTION PARTS LIST

Mark No. Description Part No.
1 Cord Assy CDE7321
2 Cap CNS1472 A
3 Cord Assy CDP1020
> 4 Fuse(10 A) CEK1136
5 •••••
6 Cap CNS1472
7 Resistor RS1/2PMF102J
8 Remote Control Assy CXC7605
9 Cover CZN7062
10 Detach Grille Assy CXC9037
11 Screw BPZ20P080FTB
12 Button (OPEN) CAI1691 B
13 Button (CLOCK) CAI1699
14 Button (SRC, DISP, BAND, SW) CAI1769
15 Button (RDM, EQ) CAI1765
16 Button (COMP) CAI1770

17 Button (LIST) CAI1890
18 Spring CBH2967
19 Cover CNS9336
20 Lighting Conductor CNV9900
C
21 Holder CNV9906
22 LCD(LCD2101) CAW1955
23 Connector(CN2101) CKS5207
24 Holder CND4310
25 Spacer CNN2403
26 Connector CNV9493
27 Lighting Conductor CNV9899
28 Grille Unit CXC9125
29 Knob Unit QXA3006
30 Spring XBL7005 D
31 IC(IC2102) GP1UX51RK
32 Resistor RSV2PMF102J
DVH-P6050UB/XN/CN5
5 6 7 8
85
1 2 3 4
9.3 EXTERIOR(2)
A
A
A
D
E C
DVH-P6050UB/XN/CN5
86
1 2 3 4
5 6 7 8
(1) EXTERIOR(2) SECTION PARTS LIST

1 Screw ASZ26P050FTC 45 Heat Sink CNR1948

2 Screw BMZ30P040FTB A
3 Screw BSZ26P060FTC 46 FM/AM Tuner Unit CWE2098
4 ••••• 47 Holder CND4324
5 Screw(M2 x 3) CBA2085 48 Fan Motor CXM1288
49 Connector(CN1081) VKN1928
6 Screw(M1.7 x 2) CBA2116 50 Pin Jack(CN282) XKB7001
7 Cable CDE8398
8 Cord Assy CDE8695 51 Insulator XNM7031
9 Cord Assy CDE8573 52 Button (EJECT) CAC7752
10 Cord CDE8640 53 Screw(M2 x 4) CBA1649
54 Screw(M2 x 4.5) CBA1925
11 Case CNB3482 55 Washer CBF1038 B
12 Earth Plate CND2171
13 Holder CND3598 56 Spring CBH2650
14 Cover CND4084 57 Spring CBH2651
15 Bracket CND4388 58 Spring CBH2652
59 Spring CBH2653
16 Bracket CND4389 60 Holder CND1254
17 Cushion CNM9126
18 Insulator CNN2308 61 Spacer CNN2155
19 Panel CNS9472 62 Gear CNV5997
20 Cap CNV6727 63 Arm CNV7400
64 Arm CNV7401 C
21 Guide CNV9669 65 Arm CNV7402

22 Chassis CNA3054
23 Insulator CNN2156 66 Arm CNV7403
24 Tuner Amp Unit See Contrast table(2) 67 Panel Unit CWN3429
25 Screw BMZ26P150FTC 68 Connector(CN1972) CKS4806
26 Screw BMZ26P220FTB 70 Holder Unit CXB9502
27 Screw BPZ26P070FTC
28 Screw BSZ26P060FTC 71 Damper Unit CXB9503
29 Screw(M2.6 x 14) CBA2091 72 Holder Unit CXC5760
D
30 Antenna Cable CDH1336 73 Sub Panel Unit CXC9168
74 Cover CNM6854
31 Clamper CEF1048 75 Panel CNS9396
32 Plug(CN751) CKM1370
33 Jack(CN231) CKN1077 76 Lighting Conductor CNV6487
34 Plug(CN281) CKS1224 77 Sub Spring Assy XXA7363
35 Plug(CN701) CKS3537 78 Spring CBL1512
79 Pin CNV6486
36 Connector(CN312) CKS4124 80 DVD Mechanism Module(MS5AVCOD) CXK6631
38 ••••• 81 Screw JFZ20P018FTC E
39 Connector(CN101) CKS5075 82 IC(IC251) PAL007C
40 Connector(CN131) CKS5271 83 IC(IC1001) NJM2388F84
84 Transistor(Q1031) 2SD2396
41 Connector(CN1301) CKS5967 85 Coil(L751) CTH1280
42 Holder CND3893
43 Holder CND4386 86 Wrapping Terminal (JH1301) CKF-047
44 Insulator CNN2307
(2) CONTRAST TABLE

DVH-P6050UB/XN/CN5, DVH-P6050UB/XN/RC, DVH-P6050UB/XN/RD
F
and DVH-P6050UB/XN/RI are constructed the same except for the following:
Mark No. Description DVH-P6050UB/XN/CN5 DVH-P6050UB/XN/RC DVH-P6050UB/XN/RD DVH-P6050UB/XN/RI
24 Tuner Amp Unit CWN3298 CWN3294 CWN3295 CWN3296
DVH-P6050UB/XN/CN5
5 6 7 8
87
1 2 3 4
9.4 DVD MECHANISM MODULE
(A)
(C)
(B)
(C)
(B)
(B) (B)
B
(C)
(A)
A
E
A
(C)
C
(D)
(B)
(A)
(A)
(A)
(A)
D F
B (A)
C
B
(A)
C
D
E
(A)
D (A)
(C) (A)
F
E
(C)
(A)
(A) (B)
E
(B)
(A) : GEM1045 (A)
(B) : GEM1043
(C) : GEM1024
(A)
(D) : GEM1050 D
F
DVH-P6050UB/XN/CN5
88
1 2 3 4
5 6 7 8
DVD MECHANISM MODULE SECTION PARTS LIST

1 DVD Core Unit YWX5005 50 Damper CNV9061

2 Connector(CN1852) CKS4817 A
3 Connector(CN1101) CKS4841 51 Damper CNV9062
4 Connector(CN1301) CKS5017 52 Collar CNV8845
5 Connector(CN1201) CKS5043 53 Lever CNV8865
54 Rack CNV9063
6 Connector(CN1901) CKS5054 55 Arm CNV8867
7 •••••
8 Screw BMZ20P020FTC 56 Arm CNV8868
9 Screw BMZ20P025FNI 57 Arm CNV9577
10 Screw CBA1787 58 Arm CNV8870
59 Arm CNV8871
11 Washer CBF1038 60 Arm CNV8872 B
12 Washer CBF1064
13 Spring CBH3022 61 Arm CNV8873
14 Spring CBH3023 62 Gear CNV8874
64 Gear CNV8876
17 Spring CBH2591
20 Spring CBH2596 68 Lever CNV8903
69 Lever CNV8904 C
21 Spring CBH2597 70 Roller CNV8905

22 Spring CBL1726
23 Spring CBH2599 71 Lever CNV8908
25 Spring CBH2601 73 Guide CNV9569
74 Arm CNV9116
27 Spring CBH2604
28 Spring CBH2605 76 Compound Unit(A) CWX3595
29 Spring CBH2710 77 Compound Unit(B) CWX3559
D
30 Spring CBH2711 78 Arm Unit CXC7872
79 Frame Unit CXC6442
31 Spring CBH2935 80 Bracket Unit CXB8685
32 Spring CBH2890
33 Spring CBL1689 81 Chassis Unit CXC6443
34 Spring CBH3024 82 Motor Unit(LOAD)(M1) CXC4912
35 Shaft CLA4206 83 Motor(STEPPING)(M2) CXM1364
84 Arm Unit CXC5486
36 Shaft CLA4701 85 Roller Unit CXC5708
37 Lever CNC9933
38 Holder CND2643 86 Motor(SPDL)(M3) CXM1362 E
39 Frame CND2250 87 Screw JFZ20P018FTC
40 Holder CND2251 88 Washer YE20FTC
89 Pickup Unit(Service) CXX2118
41 Holder CND3936 90 Screw IMS20P030FTC
42 Sheet CNM6883
43 Sheet CNM8697 91 Collar CNV9570
44 Sheet CNM9658 92 Shaft CLA4771
45 Sheet CNM9407
46 Cam CNV7156
F
47 Clamper CNV7158
48 Roller CNV7165
49 Rack CNV7175
DVH-P6050UB/XN/CN5
5 6 7 8
89
1 2 3 4
10. SCHEMATIC DIAGRAM

10.1 TUNER AMP UNIT (SYSCOM) AND PANEL UNIT (GUIDE PAGE)
A Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".
A-a A-b
Large size
SCH diagram
A-a
V33
L A=C B=D
OSD
L506
IC502
H A=D B=C TC7WB383FK
1
A-a A-b Guide page 501 600 R520 1
OE VCC
8
0R0 2 7 R526 C517
A1 C1
V33 C524
C516
3 6
R01
680 R001
C526
B1 D1
12P
22P
L505
4 5
R504
GND EX
680
64
63
D1 62
61
60
59
58
57
56
55
54
53
52
51
A4 50
49
V33
R501
VIGND
680
VIGND
OE
CE
D0
D2
D3
D4
D5
D6
D7
A0
A1
A2
A3
A5
1 48
6 2C
5 1B
4 1E
VIGND 2 47
TC501
DTA124EUA
VSS1 A6
UMD2N
L504
VCM1008 3 XTALin A7 46
Detailed page
Q502
A-a A-b IC501
VIGND
R507 4
XTALout A8
45
Q501
IC503 CTRL1 A9
L501
TC7SU04FU 5 44
2E 1
2B 2
1C3
TC7SU04FU 0R0
OSDin A10
C508 6 43
OUTY GND VIGND OUTY GND OSDout A11
4 3 4 3 10P R523 7 42
B
C522 R1
VIDEO5 INA INA R508 MUTE A12
2 2 1K 8 PDC150A 41
VIDEO IN ISO +0dB VCC NC VCC NC VIGND CDLR A13
5 1 5 1 R524 10K 9 IC504 40
151 160
100P
C158 L151
SYNCjdg/Rout A14
R503 1M R506 1M 1K 10 39
R1
VIGND CHARA/Gout A15
R1
C153 NJM2505AF
R505
2R2K
2R2K
C502 R502
C518
1 X501 11 38
R152 BLANK/Bout A16
CSS1737
R1
X502
C501
C504
Vin V+ 12 37
1K
R151
C503 7P
100 4 3 IEOUT/BLKout A17
75
R509 13
C505
C506
GND 17.734475MHz 14.318 18 MHz 36
7P
R153 C154 2 PAL OUTMOD VDD1
R525
VGND Vout R530 1K 0R0 14 35
100 1 5 1 CS RST
R528 1K 15 SIN SEPin 34
OSDMUTE
SYNCJDG
C515
C523
Cbasic
IC152 VIGND SCLK SEPout
CLKCHG
SYNin
31 HFTin
Cvout
VDD2
1
NTSC
OSDCLK
VSS2
OSDCS
OSDDT
CVcr
VIGND R529 16 33
19 Cout
Yout
Cvin
NC1
NC2
NC3
NC4
Cin
Yin
VIGND
1K
17
18
20
21
22
23
24
25
26
27
28
29
30
32
ACC5V VIGND
MSVD8
VSEL2
VSEL1
L503
CVCR
CN101 VIDEO5
C512
C514
C509
C510
L101
1
1
1
VD
VD 40
AMUTE
C511
56P
VD 39
220
2K
IC101 SYS+B VIDEO SELECTOR +6dB
1200P
VIGND
C513
VD 38 TC74VHCT08AFTS1
R101
C111
191 200 VIDEO5
L502
NC 37 PGND
1
14 1A 1
6 C1
1K
5 B2
4 E2
R522
R516
L551
PGND 36
13 VCC 1B 2
UMD3N
A B OUT VIGND
PGND 35 MSPGND
Q101
12 4B 1Y 3 L L IN1 CVCR2
5 IC
PGND 34
11 4A 2A 4 L H IN2
DGND 33
E1 1
B1 2
C23
C553
10 4Y
100/16
R022
2B 5 H L IN3
C554
DGND 32 DGND2
9 3B 2Y 6 AGND MS5_2_SYS VIDEO5
3
H H MUTE
R510
2SC4081
DGND 31
100
8 3A C162 R165
R552
GND 7 0R0
39K
DGND 30
Q551
3Y IC191 L191
MSDGND 2R2 VIGND
DGND 29 C191 C551 R571 C571
C107
C101 1 8
2R2
NC 28 IN1 VOUT
R1 2 7
1SS355
180 10
D551
2R2 CTLA 47/16
VDD5 27 Vcc
D 2/2
2
3 6
C194
C195
10/16
VDD5 26 MSVDD5 CTLB IN3
R1
DGND 4 5
VDD5 25 MSVDD IN2 GND
STANDBY
R554
390
R553
DAP202U
C552
33K
10/16
VDD5 24
C
D101
EJECT BA7611AF
EJECT 23
CN1901
C193
NC 22 VIGND
AMUTE R107 470 2R2
AMUTE 21 IMH23 VIGND
XRES R108 1K Q102
XRES 20 E2 3 4 C2
IRQPW R109 470
IRQPWR 19 B2 2 5 B1
StoMS R110 220
S MS4TX 18 C1 1 6 E1
MStoS R111 220 MSR C601
MS4 SRX 17
STANBYR106 470 MSL
AGND 10P DGND
33
2
STANBY 16
MSAGND
2
VIDEO5
CSS1696
AGND 15
R112
X601
MSR
CD/DVD:+5.1dBs
15.0MHz
1500P
1500P
C102
C103
ROUT 14
100
DTA124EUA
AGND 13 MINIJACK VIDEO ISO +0dB

MSL R113 USB33
171 190
Q171
LOUT 12
1
100 AGND C602
1
L171
R102
AGND 11
0R0
MSVGND XRESET 10P

VGND 10 AGND
OSDCS
DSENS
1K USBRST
BRXEN
BSRQ
CNVSS
ASENS
BSENS
RESET
BSCK
BDATA
RCK
MSV NJM2505AF
BEEP
BEEP
ILMPW
BRST
ROT0
ROT1
IRQPW
COMPOSIT 9
C173
R1
R172 C171
14
VCC 13
4B 12
4A 11
4Y 10
BZ601
TC74VHC08FTS1
VGND 8 Vin V+
3B 9
3A 8
CPV1062
R171
Y 100 1 4 3
1 R644
75
Y
3Y
7 GND
CNVSS
1
R645 0R0
R671 0R0
R173 C172
R666 220
R667 220
R630 100
R632 100
2
1K
1K
1K
IC102
VGND 6 VGND Vout 2 1K

5 3 IC
RCK
Cb 100 1 5 1 2
Cb VDD5V
R626
R629
R624
R625
5
7 GND
IC171 VIGND
1 1A
2 1B
3 1Y
4 2A
5 2B
6 2Y
VGND 4 DGND
Cr FVGND
Cr 3 R683 100K R679 6R8K
VGND 2
C605
R617 100K R680 6R8K
R01
R635
WUP R115
47K
SYS_2_MS5
R669
WAKEUP 1 R618 100K R634 100K
220
470 C105
R678 100K
R1
DGND AUX R619 100K
R677 47K
231 250 MINIJACK R613 100K R674 C603 100P
WAKEUP
CN231
R627
R653
0R0
47K
R670
R668
R602 100K R633 100K C609 220P
4R7K
R659
220
220
VIGND 100
AUXL R231 AUXL R609 47K 100K
IPR+ DGND
COOLCONT
AUXRR232 100 AUXR 4
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
IPR- 3 R603 100 DGND
6
5
4
3
2
1
9
8
7
IP_2_SYS
AUXGND 2
CNVSS
BSRQ
XOUT
OSDCS
RESET
BSCK
VDD1
BEEP
DSENS
BRXEN
BRST
ROT0
ROT1
BYTE
ASENS
BSENS
VSS1
ILMPW
USBRST
RCK
BSO
ACC5V
NMI
R604 100
IP-BUS
RX2
XIN
1 SYS_2_IP 26 100 R642 0R0
BSI
L131 R138 R233 0R0 AUXV
D CN131 131 150 SYS_2_MS5 R605 220 27 99 R643 0R0

MALS068X
MALS068X
MALS068X
MALS068X
4R7K R139 OSDCLK

IPPW C231 AUX:+2.2dBs MS5_2_SYS R606 220 28 COOLCONT OSDO 98
BS+ R133 IC131 1K RX NC
1 R047 VERUP_2_SYS 29 TX 97 R636 0R0
GND7 100 8 1 SYS_2_IP TXMS5 AVCC
R132 R131
2 STBY DIN1 RXMS5 96 R637 0R0

15
TSCK 30
7 2 IP_2_SYS RXMS5 VREF
3 VCC ROUT AUXGNDAGND TSCK R652 1K
6 3
31 TSCK SL 95
SYS -COM
D231
D232
D233
D234
47
4 BUS+ DIN2 KEYD R647 R648

AVss 94
IP-BUS:+2.2dBs
KEYD 32
BS- R134 5 4 KEYD(EW)
5 BUS- GND DPDT R607 100 33 601 700 MODEL1 93
C133
C134
R001
C135
R001
BUP 100 DPDT

R1
6 R608 100 MODEL

IPL+ HA12241FP
KYDT 34 KEYAD 92
KYDT
7 1 Q131 6 ANTPW 35 CSENS 91
ABO R135 E1 C1 ANTPW
8 R136 2 5 DGND R664 1K MODEL R675 22K
IPR+ 2R2K
ASENBO GND TELIN R611 100K 36
TELIN NC 90
B1 B2
C131
9 3R3K
R1
R137 3 4 PCL2 PCL 37 R647 R648 EJTIN 89

IPR- C2 E2 R614 100K PCL NG
10 5R6K RESET2 RESET RC NM 47K 100K
UMF23N ASENBO 38 USBTEST_NG 88 TEST2 R676
TESTIN
IPL- DGND R665 RESET ASENBO
11 GND IPL+ R610 RD 47K NM R631
AMUTE 39
AMUTE NC 87
IPL- 1K
1K R660 0R0 RI 47K 47K 86 R682 100K
RESET
XRESET 40 47K
NC2
NC1
CSG1020
TESTIN
2
TUNR XRESET
1 IC602 5
4
S601
BD4835G
R662 0R0 CN5 82K 24K 1K

IC401
IRQPW 41
IRQPW FLG 85 R673
RECIVE
C416 RESET STANDBY R620 1K 42 IC601 TUNPDO 84 R649 470
1
C415 10 1 STANDBY
R001 R47 IN1+ OUT1 TUNL VDCONT 43 VDCONT
PEG456A RECIVE 83 R681
VSS
R413 C414 9 2
2
3
OUT
VDD
IN1- GND SYS+B R601 1K

62K R47
8 3 GND WAKEUP 44 WAKEUP USBCTL 82 R672
NC Vref 1K ACCPW 45 100K
ACCPW RDS-HSLK 81
1SS355
C417 C413 7 4 ACCPW

R646
D601
18K
IN2- Vcc R686

R001 C412
R47
6 5
SYSPW 46
SYSPW RDS-DATA 80
73 USBTEST_NOW
C418
C419
C420
R412
53 USBTEST_TRK
2R2
1K
R1
IN2+ OUT2 RDS-LOCK 79

10
C614 IPPW 47
61 USBTEST_IN
62K R47 IPPW NC

SYSMUTE 48 MUTE SYNCJDG 78
56 ROMDATA
59 OSDMUTE
NJM2794RB2 1 AMPPW CLKCHG

75 DDCONF
RFGND
65 TUNPCK
SWVDD 77
66 TUNPDI
55 OSDPW
57 ROMCK
58 ROMCS
AMPPW 49
FLPILM
70 VMUTE
BGENS
AGND VDD5V
67 JOYST
68 VSEL1
69 VSEL2
TUNER(30%):-24dBs DGND
72 LDET
76
60 VDD
SWVDD 50
54 VCK
62 VSS
VDT
VST
63 CE2
64 CE1
R638100K
24 TUNR
R661 100K
R616 47K
R621 47K
R1
Rch
R612
100K
VDD5V
CWE2098
51
52
71
74
23 TUNL R654 47K

Lch IN
C617
TRK
22
C618 1
BEGND
R687
100K
NOW
21 DGND3
RDS_HSLK
20 RFGND
VMUTE
RDS_LOCK
CN601
18K
19
RDS_DATA
18 TUN33 DGND N
RDS_CK DI
1K
TUN3V L402
1
2
3
4
5
6
7
8
9
17 TUNPDI
R685
TUNPCKR628 680
TUNPDI R663 470
VSEL1 R639 1K
VSEL2 R640 1K
E VDD_3.3 SK
1K
47/6R3
LDET
C402
C405 C404
C406
R623
R650 1K
4R7
47/6R3 R01
VERUP_2_SYS
16
COMP TUNPDO CS
15
R651
FM/AM TUNER UNIT
TUNPCK
OSDMUTE
DGND DGND
DDCONF
C401
R001
BGSENS
14 CE1
OSDPW
ACCPW
FLPILM
CNVSS
DO TUN5V2 L404
RESET
VMUTE
JOYST
CE2
KEYD
TSCK
LDET
13 TUND GND
VCK
VDT
VST
CE2
CE1
ROM_VDD SL
12 R401 680
OSCGND
11 RFGND R402 680
CSENS
DPDT
LDET
KYDT
ROT0
ROT1
JOYST
FLPILM
CN701
EJTIN
10 R403 680
DI
CK
9 R404 680
CN1972 CN1971 KYDT
ILM+B 8.4V
R701 1K FLPILM BUP
8 R405 680 14 14
DSENS
CE1 ROT0 R702 1K Q701

NC 2SA1576A R710
7 R406 680 12 13 13
WC CSENS ROT1 R703 1K
11 12 12 7.7V 390
6 R709
CE2 DPDT DPDT R704 1K (3216 1/4W)
R407 SYS+B
B CN2101
5 VCC 10 11 11
SL ILM+B
DETACH
47K
C411
ROT0 S1970 D1970

33P
L403 9 10
4 680 CSG1174 CL220PGC 10
R708
10K
S701
VCC KYDT DGND

3 8 9 9
FM_ANT EJSW R705 1K
100/16
C408
ROT1 Q702
R01
2 7 8 8
Y401
SWVDD5 DTC114EUA
C409
RF_GND RFGND DGND GND

1 L401 6 7 7
AM_ANT ILM+B CSENS R706 1K
5 6 6 5.0V
NC
EJECT FLPILM
3 4 5 5
L701
CSA30-201N
MANT SWVDD SWVDD ILMGND

3 4 4
ZNR401
1
JOYST
CN402 2 2
ILMGND
3 3
JOYST R707 1K
D701 MALS068X
D702 MALS068X
D703 MALS068X
D704 MALS068X
D707 MALS068X
D708 MALS068X
D709 MALS068X
1 2 2
C703 R001
RFGND ILMGND
R1
1 1
R1970 R1971
100
C702
TUNDGND
C PANEL UNIT
ILMGND
100
RFGND ILMGND
ILMGND
ILMGND
A 1/2
DVH-P6050UB/XN/CN5
90
1 2 3 4
5 6 7 8
A-b
NOTE :
Symbol indicates a resistor. Decimal points for resistor
No differentiation is made between chip resistors and and capacitor fixed values
TUNER AMP UNIT
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
are expressed as :
2.2 t 2R2
0.022 t R022
A 1/2 (SYSCOM)
discrete capacitors.
1
ACC5V
OPT Q311
R318 2SA1579
311
56
55
54
53
52
51
A4 50
49
330 0R0
5
R314
100K
OE
CE
D7
A0
A1
A2
A3
A5
48
47 The > mark found on some component parts indicates OPT-OUT
A6 CN311 IC311 L311
R315
A7 46
the importance of the safety factor of the part.
10K
A8 OPT1 1 5
CN312
D 2/2
45 INB Vcc OPT2
R311 R317 R313
A9
44 Therefore, when replacing, be sure to use parts of 1
2
INA
OPT3
2
A10 0R0 620 3 4 120 3
identical designation. C313
R312
43 2 GND OUTY
47K
1
A11
CN1852 (BLACK)
10
C311
C312
R1
42 15P
C150A
A12
A13
41
TC7SET08FUS1 OPTG
B
504 40
A14 OPTGND
39 GND
A15
A16
38 CN281
37 VGNDIN
A17 PreL C281 R281 4 VGND(IN)
36 VIN
VDD1 BUP 10/16 820 R296 3 VIDEO IN
35 Q286 VGNDOUT
RST DTC323TU 4R7K 2 VGND(OUT)
R294
R287
SEPin 34 UMD2N VOUT
22K
C515
C523
C289
R001
SEPout 1 VIDEO OUT
SYNin
RCA
31 HFTin
Cvout
1E 4 3 1C
1
1
VSS2
CVcr
33 1K
Cvin
C1
B2
E2
NC3
NC4
C296 470P
RT3C99M
Yin
6
5
4
1B 5 2 2B 281 310
Q281
2
2C 6
miniSMDC075F/24
1 2E
25
26
27
28
29
30
32
FU284
Q285 VGND
40A
VIGND
C2
E1
B1
R288
C290
R001
1
2
3
VGND
22K
VMUTE R297 >
CVCR
1
C512
PreR C282 R282 4R7K

C510
L592
1
1
10/16 820
VGND
RC AGND
C511
56P
R597
220
2K
FL C283 R283
CN282
33
1200P
GND
C513
VIDEO5 820 R298 FR

10/16
L502
FL 1 FRONTR
4R7K
R522
R516
R598
R289
C291
R001
22K
2 FRONTL
39
L571
SWR
C1
B2
E2
RT3C99M
VIGND 75 DRIVER + 6dB AMP C595 22/6R3
6
5
4
SWL 3 S/WR
Q282
CVCR2 C596 4 S/WL(S/WR)
VIDEO5 RR
R574
330/6R3 5 REARR
C2
E1
B1
R001
R290
C292
R001
470
1
2
3
10/16
RL
22K
C572
R578
C573
470
6 REARL(S/WL)
3
2
1
R593
0R0
R299 R304 RCAG

SAG
OUT
VCC STBY
TK15405BMI
R575
R510
4.7K(B) 7 AGND
100
FR C284 R284
VIDEO OUT ISO +0dB 4R7K
R577 CCP1446
R572
IC592
180K
1K 8
Q571
AGND
VIDEO5
1
VR571
2SA1576A
NJM2505AF 10/16 820

Q572
C575 6dB 9 AGND

GND
2
R571 C571 R591 C591

C593
R1
VIGND
2SA1576A
47K
IN
100P C285 R285

1R5K 3
Vin V+ RL RCAGND
R596
L591
180 10 100 10 4 3
R300
4
5
6
GND 10/16 820

2
R592 C592 C594

R573
2
68K
VGND Vout 4R7K
R291
C293
R001
2
5 1
miniSMDC075F/24
100 10
22K
C1
R594
C597
B2
E2
47/6R3
33/10
R1
C295 R01
33K
RT3C99M
C598
FU283
R1
6
5
4
40A
IC591
Q283
C299
VIGND VIGND
C
1
C2
E1
B1
1
2
3
VGND VGND
R292
C294
R001
22K
R595 R301 > RCAGND GND
68K RR C286 R286 4R7K
10/16 820
BUP BUP2
RC AGND
MSR
USBR
AUXR
TUNR
USBR
D281 IC251
MSL
USBL
USBL
TUNL
AUXL
Q2 8 4
IPR+
IPL+
R293 R295
IPR-
IPL-
PAL007C
1SS355 E2 4 3 C2
470 470 1 1.TAB
R209 R208
100/16
C288
B2 5 2 B1 2 2.PW.GND2
22K 22K C1 6 1 E1 FL-
UMD3 N 3 3.FL-
180
180
R203
R204
4 4.STBY
RCAGND D282 RCAGND FL+
SYSMUTE 5 5.FL+
R205 AUXGND R206 DAN202U
IC201 OFFMUTE 6 6.VCC1/2
22K 22K FR-
C219 4R7 1 IN5-_L 28 C218 2R2 7 7.FR-
R201
R202
R260
1K
1K
ROT0
ROT1
IN5+_R AMPPW
C217 2R2 2 IN5+_L 27 C216 2R2 8 8.PW.GND1
IN4+_R 1K FR+
C215 2R2 3 IN4+_L 26 C214 2R2 C265 9 9.FR+
IN4-_R
C213 2R2 4 IN4-_L 25 C212 R22 10 10.SVR
R632 100
FR C252 1 C256 1 10
SYS+B C211 R22 5 IN3_LIN3_R 24 C210 2R2 11 11.FRIN
VDD5V FL C251 1 C255 1
VDD5V C209 2R2 6 IN2_LIN2_R 23 C208 2R2 12 12.FLIN
L601 C207 2R2 7 IN1_R 22 R207 13 13.S-GND
IN1_L GND RL C253 1 C257 1
R679 6R8K 8 21 AGND 14 14.RLIN
L201 Vref STB RR C254 1 C258 1
C605
C604
R680 6R8K 9 20 15 15.RRIN

R01
Vcc CLK 4R7 4R7

1
R634 100K 10 Front_L 19 16 16.ACGND

RR+ C263 C264
R678 100K 11 Rear_LDATA 18 17 17.RR+
C201
C202
C203
1K
10/16
47/16
AMP
R1
Front_R FR AGND
R677 47K 12 Pre/SW_L 17 MUTE 18 18.PW.GND3
DGND Rear_R 251 280 RR-
C603 100P 13 Vp 16 RR 19 19.RR-
Pre/SW_R SWR SYS+B
R633 100K C609 220P 14 15 MUT3 20 20.VCC3/4
Pref PGND RL+
R255 21 21.RL+
R258 R261
C204
C206
C205
R1
PML018A 22 22.MUTE
AGND SWL
3300/16
10K 220 100 RL-

C261
10/16
47/16
C260
23
R1
DGND Q253 23.RL-

2
1
C259
R256
33/10
RL
10K
SYSMUTE DTC144EUA
ROT0
ROT1
100 R642 0R0 OSDCLK FL 24 24.PW.GND4

Q251
OSDCLK
99
OSDO 98
R643 0R0 OSDDT
OUTPUT
DTC124EUA
25 25.B.REMOTE
D
NC
97 R636 0R0 INPUT
AGND
E-VOL CAPTAIN6 TUNER: -5.9dBs AGND
BUP2
IP-BUS:+10.3dBs
B.REMOTE
AVCC R262 GND

96 R637 0R0 TUNER: -27dBs 201 230 OFFMUTE
VREF
IP-BUS: -0.8dBs CD/DVD:+10.2dBs MUT1 MUT2 47K
R652 1K
SL 95 SL USB: +9.7dBs D251 R259
CD/DVD:+2.1dBs
AVss 94 R647 R648
USB: -2.4dBs AUX:+10.3dBs 100K
HZU8R2(B2) Q252
47K
R257
ODEL1 93 AUX: -0.8dBs 2SC4081

MODEL
KEYAD 92 KEYAD
CSENS 91 CSENS
AGND
NC 90 R675 22K
1SR154-400
BUP (6)
VCK
VDT
VST
EJTIN 89 EJTIN
D751
NG 100K
EST_NG 88 TEST2 R676
TESTIN
SENS 711 750 ASENS&BSENS

COOLCONT
OSDPW
SWVDD
ACCPW
DDCONF
SYSPW
VDCONT
R631
NC 87
ILMPW
ASENS D752
ESTIN 86 47K R682 100K BSEN1 D712
1SR154-400
BSEN2 R712
1K
FLG 85 R673 FLG
100K HZU7L(C3)
1E 6
5
2C 4
R714
RECIVE
UNPDO 84 R649 470

47K
TUNPDO
1B
USBR
ECIVE 83 R681
OSDPW
Q711
IMX1
1K
USBCTL 82 R672 USBCTL GND GND
100K USBL
S-HSLK 81 SYSPW
1 1C
2 2B
2E
D711
S-DATA 80 BSRQ R711
ASEN HZU7L(A1)
3
S-LOCK 79 BSRQ SWVDD

NC BSENS 10K
4R7K
R713
R716
C711
YNCJDG 78
47K
BRXEN
R1
CLKCHG
75 DDCONF
77 SYNCJDG BRXEN ACCPW

76 CLKCHG BSCK
BSCK ILMPW
GND GND
R612
100K
74
BDATA BU2 BU1

L751
BDATA COOLCONT
600uH
CN751
1SR154-400
1SR154-400
NOW
DGND3 BRST
>
D754
D753
BRST DDCONF
GND2
GND1
CEK1136
CN601
NM
USBRST
VDCONT 1
10A B.U
USBRST GND
BGSENS 2
10
1
2
3
4
5
6
7
8
9
USBCTL GND B.G.SENS

3
E
TXMS5
USBCTL
VERUP_2_SYS
BREM BREM
A 2/2 4
SYS_2_MS5
FLG ACC 1K ACC

DGND 5
DDCONF
FLG (1/2W)
ACCPW
CNVSS
RESET
6
KEYD
TSCK
TELM TELM
7
VGND
ACC5V 8
RL- VGND RL- RL-
DSENS
9
FLPILM
R731
B.GEAR SENSE FL-

47K
FL- FL-
10
FLPILM BUP BGSENS RL+ RL+ RL+
11
DSENS
Q701 D731 FL+ FL+

2SC4081
R710 R733 R734 L731 FL+

2SA1576A 12
Q731
RR-
JH1 JH2 10K UDZS6R8(B)10K RR- RR-
R732
C731
390 13
10K
R1
FR- FR-
R709 (3216 1/4W) TELMUTE FR-
14
RR+ RR+ RR+
DETACH
47K
CSN1039
1 1 15
2
GND
R708
ACC5V FR+
10K
FR+ FR+
S701
16
Q702 R742
1
DTC114EUA Q741 4R7K R743 D741 L741

2SA1576A R744 TUNER:+20.1dBs
GND TELIN 4R7K
15K
IP-BUS:+36.3dBs
C741
CD/DVD:+36.2dBs
R1
DAN202U
ILMGND GND GND
USB:+35.7dBs
AUX:+36.3dBs
A 1/2
DVH-P6050UB/XN/CN5
5 6 7 8
91
F
E
B
A
D
C
92
A-a A-b
NOTE :
Symbol indicates a resistor. Decimal points for resistor
A-b 1/2
No differentiation is made between chip resistors and and capacitor fixed values
1
1
discrete resistors. are expressed as : TUNER AMP UNIT

Symbol indicates a capacitor. 2.2 t 2R2 A 1/2 (SYSCOM)
No differentiation is made between chip capacitors and 0.022 t R022
1
discrete capacitors.
ACC5V
OPT Q311
R318 2SA1579
311
56
55
54
53
52
51
49
330 0R0
48
D7
CE
OE
A0
A1
A2
A3
A4 50
A5
R314
100K
47 The > mark found on some component parts indicates OPT-OUT

A6 CN311 IC311 L311
A7 46
A8 the importance of the safety factor of the part. OPT1 1 5
10K
R315
45 INB Vcc OPT2 CN312

A9 R311 R317 2 R313 OPT3
44 Therefore, when replacing, be sure to use parts of D 2/2 1 INA 2
A10 0R0 620 3 4 120 3
43 identical designation. 2 C313 GND OUTY 1
A11 (BLACK)
47K
10
R312
42 CN1852 15P
R1
A12 TC7SET08FUS1 OPTG
C311
C312
150A 41
A13
04 40
A14 OPTGND
39 GND
2
2
A15
38 CN281
A16
37 VGNDIN
A17 PreL C281 R281 4 VGND(IN)
36 VIN
VDD1 10/16 820 R296 3 VIDEO IN
35 BUP Q286 VGNDOUT
RST DTC323TU 4R7K 2 VGND(OUT)
SEPin 34 R294 UMD2N VOUT
SEPout 1 VIDEO OUT
1
1
22K
1E 4 3 1C
R287
33 1K RCA
C515
C523
C289
R001
6
5
4
C1
B2
E2
1B 5 2 2B
NC3
Yin
VSS2
Cvout
NC4
Cvin
CVcr
SYNin
281 310
2
2C 6 1 2E
25
26
27
28
29
30
31 HFTin
32
Q281
Q285 VGND
1
2
3
VIGND
RT3C99M
40A
VGND
E1
B1
C2
C296 470P
FU284
VMUTE >
22K
R297
R288
C290
R001
1
CVCR
PreR C282 R282
1
4R7K
1
C512
10/16 820
C510
L592
VGND
miniSMDC075F/24
RC AGND
C283 R283
56P
2K
FL
C511
220
33
GND
R597
VIDEO5 10/16 820 R298 FR CN282
C513
1 FRONTR
1200P
DVH-P6050UB/XN/CN5
FL
4R7K
L502
2 FRONTL
39
SWR
22K
6
5
4
C1
B2
E2
R522
R516
R598
R289
C291
R001
VIGND 75 DRIVER + 6dB AMP C595 22/6R3 3 S/WR
L571
SWL
CVCR2 C596 4 S/WL(S/WR)
VIDEO5 RR
Q282
330/6R3
1
2
3
5 REARR
RT3C99M
3
3
RL
E1
B1
C2
470
R574
3
2
1
22K
6 REARL(S/WL)
R001
R290
C292
R001
470
10/16
R299
C572
R578
R304 RCAG
C573
R575
0R0
4.7K(B) 7 AGND
R593
C284 R284
SAG
OUT
FR 4R7K
100
VIDEO OUT ISO +0dB
R510
1K 8 AGND
1
C575 NJM2505AF VIDEO5 10/16 820
6dB
R572
180K
2
9 AGND
Q571
IC592
R571 C571 VIGND R591 C591
Q572
R1
VR571
100P C285 R285
IN
GND
VCC STBY
Vin V+ RL RCAGND
TK15405BMI
47K
C593
180 10 100 10 4 3
4
5
6
R300
2SA1576A
GND 10/16 820
R596
L591
C594
2
R592 C592 2
R577 CCP1446
1R5K 3
VGND Vout 4R7K
2SA1576A
68K
2
R573
100 10 5 1 47/6R3
6
5
4
C1
B2
E2
R1
22K
R1
R291
C293
R001
33K
IC591
R594
C597
33/10
C598
40A
FU283
VIGND
Q283
VIGND
1
C295 R01
C299
1
2
3
RT3C99M
VGND VGND
E1
B1
C2
R595 R301
22K
R292
C294
R001
> RCAGND GND

68K RR C286 R286 4R7K
miniSMDC075F/24
10/16 820
BUP BUP2
RC AGND
D281 Q2 8 4 IC251
R293 R295 PAL007C
MSL
MSR
USBL
USBR
USBL
TUNL
IPL-
IPL+
AUXL
AUXR
IPR+
IPR-
TUNR
USBR
1SS355 E2 4 3 C2
470 470 1 1.TAB
R209 R208
B2 5 2 B1 2 2.PW.GND2
22K 22K FL-
C288
C1 6 1 E1 3 3.FL-
100/16
UMD3 N
4
4
4 4.STBY
180
180
RCAGND D282 RCAGND FL+
R203
R204
SYSMUTE 5 5.FL+
R205 AUXGND R206 DAN202U
IC201 OFFMUTE 6 6.VCC1/2
22K 22K FR-
C219 4R7 1 IN5-_L 28 C218 2R2 7 7.FR-
AMPPW R260
IN5+_R
1K
1K
8 8.PW.GND1
R201
R202
C217 2R2 2 IN5+_L 27 C216 2R2

1K FR+
ROT1
IN4+_R
C215 2R2 3 IN4+_L 26 C214 2R2 9 9.FR+
C265
IN4-_R
C213 2R2 4 IN4-_L 25 C212 R22 10 10.SVR
FR C252 1 C256 1 10
VDD5V FL C251 1 C255 1
IN1_R R207
R632 100
L601 C207 2R2 7 22 13 13.S-GND
IN1_L GND RL C253 1 C257 1
R679 6R8K 8 21 AGND 14 14.RLIN
R680 6R8K 9 20 15 15.RRIN
1
Vcc CLK 4R7 4R7
R01
C605
C604
R634 100K 10 Front L 19 16 16.ACGND
C263 C264
22K 22K FR-
C219 4R7 1 IN5-_L 28 C218 2R2 7 7.FR-
AMPPW R260
IN5+_R
1K
1K
8 8.PW.GND1
R201
R202
C217 2R2 2 IN5+_L 27 C216 2R2
1K FR+
ROT1
IN4+_R
C215 2R2 3 IN4+_L 26 C214 2R2 9 9.FR+
C265
IN4-_R
C213 2R2 4 IN4-_L 25 C212 R22 10 10.SVR
FR C252 1 C256 1 10
VDD5V FL C251 1 C255 1
IN1_R R207
R632 100
L601 C207 2R2 7 22 13 13.S-GND
IN1_L GND RL C253 1 C257 1
R679 6R8K 8 21 AGND 14 14.RLIN
R680 6R8K 9 20 15 15.RRIN
1
Vcc CLK 4R7 4R7
R01
C605
C604
R634 100K 10 Front_L 19 16 16.ACGND
RR+ C263 C264
R678 100K 11 Rear_LDATA 18 1K 17 17.RR+
Front_R AGND
R1
R677 47K 17 FR MUTE AMP 18 18.PW.GND3
C201
C202
C203
12 Pre/SW_L
10/16
47/16
DGND 251 280 RR-
C603 100P 13 Vp Rear_R 16 RR 19 19.RR-
Pre/SW_R SWR SYS+B
14 15 20 20.VCC3/4
5
R633 100K C609 220P MUT3
5
Pref PGND RL+
R255 21 21.RL+
R258 R261
PML018A 22
R1
AGND SWL 22.MUTE
C204
C206
C205
10K 220 100 RL-
1
DGND Q253 23 23.RL-
R1
RL DTC144EUA
SYSMUTE
C261
10/16
47/16
C260
10K
100 OSDCLK 24 24.PW.GND4
C259
R256
R642 0R0 FL
3300/16
33/10
Q251
ROT0
ROT1
99 R643 0R0 OSDDT 25 25.B.REMOTE
SDCLK DTC124EUA
OSDO 98 OUTPUT
NC AGND TUNER: -5.9dBs BUP2
97 R636 0R0 INPUT E-VOL CAPTAIN6 AGND
AVCC IP-BUS:+10.3dBs OFFMUTE R262 GND
96 R637 0R0 TUNER: -27dBs 201 230
VREF
IP-BUS: -0.8dBs CD/DVD:+10.2dBs MUT1 MUT2 47K
R652 1K SL
SL 95 USB: +9.7dBs D251 R259
R647 R648
CD/DVD:+2.1dBs
B.REMOTE
AVss 94 USB: -2.4dBs AUX:+10.3dBs 100K

HZU8R2(B2) Q252
ODEL1 93 2SC4081
47K
MODEL
AUX: -0.8dBs
R257
KEYAD 92 KEYAD
CSENS 91 CSENS
AGND
NC 90 R675 22K
89 EJTIN
BUP (6)
EJTIN
VDT
VCK
VST
NG 100K
ST_NG 88 TEST2 R676
D751
R631
SENS 711 750 ASENS&BSENS
NC 87
1SR154-400
ASENS D752
86 R682 100K BSEN1 1SR154-400
TESTIN
STIN 47K D712
BSEN2 R712
OSDPW
SYSPW
SWVDD
ACCPW
ILMPW
1K
DDCONF
VDCONT
FLG 85 R673 FLG
5
100K HZU7L(C3)
6
6
COOLCONT
NPDO 84 R649 470 TUNPDO
1E 6
1B
2C 4
R714
47K
83 USBR OSDPW
ECIVE R681
RECIVE
R672 1K USBCTL
SBCTL 82 GND GND
Q711
IMX1
100K USBL SYSPW

-HSLK 81
D711
2E
BSRQ ASEN HZU7L(A1)

1 1C
2 2B
3
-DATA 80 R711
-LOCK 79 BSRQ SWVDD
NC BSENS 10K
NCJDG 78 BRXEN
R1
LKCHG
47K
R713
R716
4R7K
C711
77 SYNCJDG BRXEN ACCPW

76 CLKCHG BSCK
BSCK ILMPW
GND GND
BU2 BU1
75 DDCONF
BDATA L751
R612
100K
BDATA COOLCONT
600uH
DGND3 BRST CN751
NOW
BRST DDCONF >
CEK1136
D754
D753
USBRST 10A B.U

GND2
GND1
CN601
NM VDCONT 1
1SR154-400
1SR154-400
USBRST GND
1
2
3
4
5
6
7
8
9
10
USBCTL GND BGSENS 2
B.G.SENS
DVH-P6050UB/XN/CN5
USBCTL 3
BREM BREM
4
FLG ACC
TXMS5
1K ACC
DGND
7
7
FLG
A 2/2 5
(1/2W)
6
TELM TELM
7
DDCONF
KEYD
TSCK
VERUP_2_SYS
ACCPW
RESET
CNVSS
SYS_2_MS5
VGND
ACC5V 8
RL- VGND RL- RL-
9
B.GEAR SENSE FL- FL- FL-
10
47K
R731
DSENS
BUP RL+ RL+ RL+
FLPILM
FLPILM BGSENS 11
Q701 R733 D731 R734 L731 FL+ FL+ FL+
2SA1576A R710 12
UDZS6R8(B)10K RR- RR- RR-
390 10K 13
DSENS
JH1 JH2
Q731
R1
R709 FR- FR- FR-

10K
(3216 1/4W)
2SC4081
TELMUTE
R732
C731
14
RR+ RR+ RR+
47K 15
2
1 1 GND
ACC5V FR+ FR+ FR+
16
10K
R708
S701
Q702 R742
1
CSN1039
DTC114EUA Q741 4R7K R743 D741 L741
2SA1576A R744 TUNER:+20.1dBs
DETACH
GND TELIN 4R7K IP-BUS:+36.3dBs
15K
DAN202U CD/DVD:+36.2dBs
R1
C741
ILMGND GND GND

USB:+35.7dBs
AUX:+36.3dBs
8
8
A-a A-b
A-b 1/2
93
E
A
D
C
F
B
F
E
B
A
D
C
94
A-a A-b
A-a 1/2
A-b 1/2
1
1
V33
L A=C B=D
OSD IC502
H A=D B=C TC7WB383FK
L506
1
501 600 R520 1 8

OE VCC
0R0 2 7 R526 C517
A1 C1
V33 C524 3 6 680 R001
B1 D1
R01
C516
22P 4 5
12P
C526
GND EX
L505
64
63
61
60
59
58
57
56
55
54
53
52
51
49
680
V33 VIGND
R504
VIGND
680
1
D0
D1 62
D2
D3
D4
D5
D6
D7
CE
OE
A0
A1
A2
A3
A4 50
A5
R501
VIGND 2
6 2C
5 1B
4 1E
TC501 VSS1 A
VCM1008 3 XTALin A
VIGND XTALout A
L504
IC501 R507 4
Q502
UMD2N
IC503 CTRL1 A
TC7SU04FU TC7SU04FU 0R0 5
Q501
OSDin A1
DTA124EUA
2E 1
2B 2
1C 3
C508
L501
6
OUTY GND VIGND OUTY GND OSDout A1
4 3 4 3 10P R523 7
VIDEO5 INA INA A1
2 2 1K
R508 8 MUTE PDC150A
VIDEO IN ISO +0dB VCC NC VCC NC VIGND CDLR A1
5 1 5 1 R524 10K 9 IC504
C522 R1
151 160 SYNCjdg/Rout A1
R503 1M R506 1M 1K 10
VIGND
2
2
100P
CHARA/Gout A1
R1
NJM2505AF
R1
C153 11
1 X501
R152 BLANK/Bout A1
CSS1737
R505
X502
2R2K
2R2K
C518
Vin V+
R1
12
C158 L151
4 3 IEOUT/BLKout A1
1K
100
C501
C504
GND
75
17.734475MHz 14.318 18 MHz R509 13
R153 C154
R151
2 OUTMOD VDD
7P
PAL
C502 R502
C505
C506
VGND Vout R530 1K 0R0 14
5 1 CS RS
C503 7P
100 1
R525
R528 1K 15 SIN SEPin
IC152 VIGND SCLK SEPou
VIGND NTSC R529 16
VIGND
VDD2
NC1
Cin
Cbasic
NC2
Yout
NC3
Yin
VSS2
Cvout
NC4
Cvin
CVcr
SYNin
1K
CLKCHG
OSDMUTE
SYNCJDG
OSDCS
OSDDT
OSDCLK
17
18
19 Cout
20
21
22
23
24
25
26
27
28
29
30
31 HFTin
32
MSVD8 ACC5V L503

CVCR
VSEL2
VSEL1
CN101 VIDEO5
1
1
1
C512
VD
L101
C514
C509
C510
VD 40
AMUTE
VD 39
56P
2K
IC101 SYS+B
C511
VD 38 TC74VHCT08AFTS1 VIDEO SELECTOR +6dB VIGND

R101
1
NC 37 PGND 191 200 VIDEO5
DVH-P6050UB/XN/CN5
C111
14 1A 1 1K
L502
PGND 36
6 C1
5 B2
4 E2
13 VCC
R522
R516
1B 2 A B OUT
L551
PGND 35 MSPGND
12 4B 1Y 3 L L IN1 CVCR2
PGND 34
Q101
UMD3N
11 4A 2A 4 L H IN2
DGND 33
5 IC
3
3
10 4Y
E1 1
B1 2
C2 3
DGND 32 DGND2 2B 5 H L IN3
C553
R022
9 3B AGND MS5_2_SYS
3
2Y 6 H H MUTE VIDEO5
100/16
C554
DGND 31 R165
8 3A C162 0R0
100
GND 7
R510
DGND 30
39K
3Y
R552
MSDGND 2R2 IC191 L191 VIGND

DGND 29
Q551
2SC4081
C101 C191 1 8 C551

NC 28 IN1 VOUT
2R2
C107
R1 2R2 2 7 47/16
VDD5 27 CTLA Vcc
2
3 6
D551
VDD5 26 MSVDD5 CTLB IN3

R1
DGND
1SS355
4 5
C194
C195
MSVDD
10/16
VDD5 25 STANDBY IN2 GND

390
VDD5 24
R554
33K
EJECT BA7611AF
R553
C552
EJECT 23
10/16
C193
D101
NC 22 VIGND
DAP202U
AMUTE R107 470 2R2
AMUTE 21 IMH23 VIGND
XRES R108 1K Q102
XRES 20 E2 3 4 C2
IRQPW R109 470
IRQPWR 19 B2 2 5 B1
D 2/2 CN1901
StoMS R110 220
S MS4TX 18 C1 1 6 E1
MStoS R111 220 MSR C601
MS4 SRX 17
STANBYR106 470 MSL
2
STANBY 16 AGND 10P DGND

33
2
MSAGND
AGND 15 VIDEO5
MSR R112
ROUT 14
4
4
X601
100
C102
C103
AGND 13 MINIJACK VIDEO ISO +0dB
1500P
1500P
CSS1696
MSL R113 USB33

15.0MHz
4
1
LOUT 12 171 190

100
4
1
AGND C602
Q171
AGND 11
MSVGND XRESET 10P
L171
DTA124EUA
0R0
R102
VGND 10 AGND
MSV IRQPW NJM2505AF
COMPOSIT 9
RCK
R172 C171
BEEP
BEEP
BSRQ
BRST
BSCK
ROT0
ROT1
CD/DVD:+5.1dBs
R1
BZ601
14
VGND 8 Vin V+
OSDCS
ILMPW
DSENS
ASENS
BSENS
RESET
BRXEN
CNVSS
BDATA
C173
Y 100 1 4 3 CPV1062
Y 7 GND 1 R644
75
4B 12
4A 11
4Y 10
3B 9
3A 8
3Y
R173 C172 1
R171
VCC 13
1K
1K
1K USBRST
1K
1K
VGND 6 VGND Vout 2

Cb 5 3 IC 100 1 5 1 2
CNVSS
IC102
Cb
RCK
5
IC171 VIGND
DGND
R645 0R0
R626
R629
R666 220
R624
R625
R671 0R0
R667 220
R630 100
R632 100
VGND 4
Cr
TC74VHC08FTS1
1 1A
2 1B
3 1Y
4 2A
5 2B
6 2Y
7 GND
Cr 3 FVGND R683 R679 6R8K
100K
VGND 2 R617 100K R680 6R8K
WUP R115 SYS_2_MS5
0
WAKEUP 1 R634 100K

69
R618 100K
47K
C105
R635
470
MSVGND XRESET 10P
L
D
0R
R1
VGND 10 AGND
MSV IRQPW NJM2505AF
COMPOSIT 9
RCK
R172 C171
BEEP
BEEP
BSRQ
BRST
BSCK
ROT0
ROT1
5.1dBs
R1
BZ601
14
VGND 8 Vin V+
OSDCS
ILMPW
DSENS
ASENS
BSENS
RESET
BRXEN
CNVSS
BDATA
C173
Y 100 1 4 3 CPV1062
Y 7 GND 1 R644
75
4B 12
4A 11
4Y 10
3B 9
3A 8
3Y
R173 C172 1
R171
2
VCC 13
1K
1K
1K USBRST
1K
1K
VGND 6 VGND Vout 2
Cb 5 3 IC 100 1 5 1 2
CNVSS
IC102
Cb
RCK
5
IC171 VIGND
DGND
R645 0R0
R626
R629
R666 220
R624
R625
R671 0R0
R667 220
R630 100
R632 100
VGND 4
Cr
TC74VHC08FTS1
1 1A
2 1B
3 1Y
4 2A
5 2B
6 2Y
7 GND
Cr 3 FVGND R683 R679 6R8K
100K
VGND 2 R617 100K R680 6R8K
WUP R115 SYS_2_MS5
WAKEUP 1 R618 100K R634 100K
47K
C105
R635
470
220
R669
R678 100K
R1 AUX R619 100K
DGND R677 47K
231 250 MINIJACK R613 100K R674 C603 100P
WAKEUP
R602 100K
5
CN231 R633 100K C609 220P
5
47K
0R0
VIGND
R627
R653
220
220
AUXL R231 100 AUXL R670

R668
R609 47K 100K
R659
4R7K
IPR+ DGND
COOLCONT
AUXRR232 100 AUXR 4
6
5
4
3
2
1
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
IPR- 3 IP_2_SYS R603 100 DGND

AUXGND 2
ACC5V 1 SYS_2_IP R604 100 26 100
IP-BUS 0R0
NMI
XIN
L131 R138 R233 AUXV
RX2
RCK
BSI
BSO
BEEP
BSRQ
VDD1
VSS1
XOUT
BRST
BYTE
BSCK
ROT0
ROT1
131 150 SYS_2_MS5 R605 220 27 99

RESET
CNVSS
OSDCS
ILMPW
DSENS
ASENS
BSENS
BRXEN
CN131 4R7K R139 IPPW C231 AUX:+2.2dBs OSDCLK
USBRST
MS5_2_SYS R606 220 28 COOLCONT OSDO 98
BS+ R133 IC131 1K RX NC
1 R047 VERUP_2_SYS 29 TX 97
GND7 100 8 1 SYS_2_IP TXMS5 AVCC
MALS068X
MALS068X
MALS068X
MALS068X
2 STBY DIN1 TSCK RXMS5 30 96
15
7 2 IP_2_SYS RXMS5 VREF
3 VCC ROUT AUXGNDAGND TSCK 31
6 3 TSCK SL 95
4 BUS+ DIN2
47
KEYD KEYD 32 SYS -COM AVss 94 R647
R132 R131
BS- R134 5 4 KEYD(EW)
D231
D232
D233
D234
5 BUS- GND DPDT R607 100 33 601 700
100 MODEL1 93
BUP DPDT
6 100
R1
KYDT R608 34 KEYAD 92
C133
C134
R001
C135
R001
IPL+ HA12241FP KYDT
7 1 Q131 6 ANTPW 35
ABO R135 ANTPW CSENS 91
E1 C1 DGND MODEL
8 R136 2 5 ASENBO TELIN R664 1K 36
IPR+ 2R2K GND R611 100K TELIN NC 90
B1 B2
9 3R3K R137 3 4 PCL2 PCL 37 R647 R648
R1
IPR- R614 100K PCL EJTIN 89
C2 E2
C131
NG
IP-BUS:+2.2dBs
10 5R6K RESET2 RESET ASENBO 38 RC NM 47K
IPL- UMF23N DGND R665 ASENBO USBTEST_NG 88 TEST2
GND IPL+ RESET R610 R631
11 AMUTE 39 RD 47K NM
AMUTE NC 87
IPL- 1K
1K R660 0R0 RI 47K 47K 86
TESTIN
XRESET 40 47K
2
XRESET TESTIN
TUNR
NC2
NC1
IRQPW R662 0R0 41 CN5 82K 24K FLG 85
6
6
IC401 IRQPW
S601
C416 STANDBY R620 1K 42 IC601 TUNPDO 84
1
C415 10 1 RESET STANDBY
CSG1020
RESET
R001 R47 IN1+ OUT1 TUNL VDCONT 43 PEG456A
BD4835G
VDCONT RECIVE 83 R681
1 IC602 5
2
3
R413 C414 9 2
RECIVE
IN1- GND SYS+B WAKEUP R601 44
VSS
62K R47 GND WAKEUP USBCTL 82
OUT
VDD
8 3
NC Vref ACCPW 1K ACCPW 45 100K
C417 C413 7 4 ACCPW RDS-HSLK 81
R47 IN2- Vcc SYSPW R686 46
R001 RDS-DATA 80
18K
C412 6 5 SYSPW
R646
D601
R412 IN2+ OUT2 1K RDS-LOCK 79
1SS355
IPPW 47
R1
10
C614
2R2
R47 IPPW NC
C418
C419
C420
62K
SYSMUTE 48 MUTE SYNCJDG 78
NJM2794RB2 1 AMPPW CLKCHG
RFGND SWVDD 77
AGND AMPPW 49
TUNER(30%):-24dBs VDD5V DGND
SWVDD 50 76
VST
VDT
FLPILM
BGENS
24 TUNR
Rch
R1
VDD5V
51
52
53 USBTEST_TRK
54 VCK
55 OSDPW
56 ROMDATA
57 ROMCK
58 ROMCS
59 OSDMUTE
60 VDD
61 USBTEST_IN
62 VSS
63 CE2
64 CE1
65 TUNPCK
66 TUNPDI
67 JOYST
68 VSEL1
69 VSEL2
70 VMUTE
71
72 LDET
73 USBTEST_NOW
74
75 DDCONF
23 TUNL R654 47K

Lch IN
22
R638100K
BEGND
TRK
R616 47K
C617
R621 47K
R661 100K
21 DGND3
RDS_HSLK
R687
100K
NOW
20 RFGND
C618 1
CWE2098
RDS_LOCK
19
RDS_DATA
18K
TUN33
VMUTE
18 DGND
RDS_CK DI
1K
1
2
3
4
17 TUN3V L402 TUNPDI
DVH-P6050UB/XN/CN5
1K
VDD_3.3 SK
LDET
1K
16
R685
COMP TUNPDO CS
4R7
C402
C406
R623
15
47/6R3
DGND TUNPCK
7
7
14 CE1
R650 1K
R651
DO TUN5V2 L404
CE2
C401
R001
C405 C404
13 TUNDGND
47/6R3 R01
ROM_VDD SL
DDCONF
12 R401 680
VST
VCK
VDT
OSDPW
OSDMUTE
CE2
CE1
TUNPCKR628 680
TUNPDI R663 470
JOYST
VSEL1 R639 1K
VSEL2 R640
FLPILM
BGSENS
LDET
KEYD
TSCK
VERUP_2_SYS
ACCPW
VMUTE
OSCGND
11 RFGND R402 680
LDET
10 R403 680 CN701
DI
KYDT
ROT0
ROT1
DPDT
R404 680
EJTIN
CSENS
JOYST
9 CN1971 ILM+B 8.4V BU

CK CN1972 KYDT R701 1K FLPILM
8 R405 680 14 14 Q701
CE1 NC ROT0 R702 1K R710
R406 680 12 13 13 2SA1576A
7
WC CSENS ROT1 R703 1K
11 12 12 7.7V 390
6 R709
CE2 DPDT DPDT R704 1K (3216 1/
5 R407 SYS+B 10 11 11
SL VCC ILM+B
ROT0 S1970 D1970 47K
4 680 L403 9 10
CSG1174 CL220PGC 10
33P
FM/AM TUNER UNIT

VCC DGND
C411
KYDT
10K
3 8 9 9
R708
FM_ANT ROT1 EJSW R705 1K

7 8 8 Q702
2 DTC114EUA
R01
RF_GND DGND SWVDD5
C408
L401 RFGND 6 7 7 GND
100/16
1
C409
AM_ANT ILM+B CSENS R706 1K
5.0V
Y401
5 6 6
NC
EJECT FLPILM
3 4 5 5
B CN2101
MANT SWVDD L701 ILMGND
SWVDD
3 4 4
1
JOYST
2 2 3 3
CN402 ILMGND JOYST R707 1K
1 2 2
ZNR401
RFGND ILMGND
CSA30-201N
8
1
R1
8
1
100
ILMGND
C702
C703 R001
TUNDGND
PANEL UNIT
D701 MALS068X
D702 MALS068X
D703 MALS068X
D704 MALS068X
D707 MALS068X
D708 MALS068X
D709 MALS068X
RFGND
C
100
ILMGND
R1970 R1971
ILMGND
ILMGND
A-a A-b
A-a 1/2 C
A-b 1/2
95
E
A
D
C
F
B
1 2 3 4
10.2 TUNER AMP UNIT (POWER SUPPLY)
R1211
C1210
0R0
R1
A
108
107
RA10 106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
/RAS 74
73
R1201
0R0
IOGND
RDB9
RDB8
RDB7
RDB6
RDB5
RDB4
RDB3
RDB2
RDB1
RDB0
CKE
RDB15
RDB14
RDB13
RDB12
RDB11
RDB10
IOVDD
RA9
RA8
RA7
RA6
RA5
RA4
RA3
RA2
RA1
RA0
RA11
/WE
/OE
/CAS1
/CAS0
109 72
FD /RCS
110 TD C33M 71
SD SVMON3
111 70
MD SVMON2
112 69
EFM SVMON1
113 68
ASV SVMON0
114 67
ATEST DOUT
115 USB CONTROL 1201 1300 66
AVDD1 SCK0 C1219 R1
C1203 116 65
AGND1 LRCK
R1 117 64 C1220 R1
RF1 REG16
118 63 R1223 0R0
AGC0 DVDD
119 62
C3T DGND
120 61
AGC1 DAVDD2 C1216
A
121 1
60 R1224 820
RF0 ROUT
C1224 C1223
1800P 1800P
122 59 C1221 USBR
EQ2 DAGND2
B 123 58 22/6R3
EQ1 REGC
124 IC1201 57 C1222
C1204 RF2 DAGND1 R1
125 PE5647B 56
C1217
RF LOUT 1 820
R1 126 55 R1225 USBL
AGND2 DAVDD1 R1226 0R0
127 54 BRST
AVDD2 XVDD AGND
128 53 R1227 0R0
BRST
A Ver2.0B /XTAL2 C1214 BSRQ
129 52
1
1
R1
16.934MHz
B XGND BSRQ
CSS1603
NM
X1202
130 R1231 51 BRXEN
2 2
F XTAL1
131 50 BRXEN
E R1232 10K CGND C1215 BSCK
132 49
3
3
REFOUT CVDD R1
R1228 BSCK
133 48 C1212 BDATA
FE REGS
134 47 R47 0R0 BDATA
BRST
FED /STBY USBRST
135 46
ADCIN TEST USBRST
136 45 USBCTL
TE PPON
137 44 R1222 USBCTL
TE0 OCI FLG
138 43 47K
TE2 F-REGC FLG
MALS068X
/USBXTAL2
139 42
USBXTAL1
ROMDATA
TEC CONT
D1201
C1202 140 41
ROMCK
ROMCS
C LD
GNDQ
CD3VON
R1 141 40
PD /PUEN
ADCGND
ADCVDD
DSCSNS
VDSENS
CLCONT
142 LRCKOK 39
/TESTIN
ADVDD
/ADENA
/BRXEN
/RESET
CPRDY
CPRST
FLMD0
/BSRQ
ADGND
/EJSW
MCKRQ
/BSCK
HOME
DGND
VDDQ
TEMP
FRXD
FTXD
LOEJ
143 38
12EJ
ROM
BSO
SDA
SCL
8EJ
BSI
DM
DP
144 37
1
2
3
4
6
7
8
9
5
14
15
35
10
11
12
13
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
USBGND
R1202
C1206
150
X1201
R1206
R1207
CSS1756 1
R1232
47K
C1201
R1
10K
GND1 X1 C1207
R1216
100K
150K
C1205
47K
47K
1P 2 1 R1 DD CO
1P
100K
100K
1101
C1209
R1213
GND2
R1214 220
3 X2
C1226 100P
R1208
R1209
R1210
R1215
C1211 R01
4
10K
R1230
R1218
R1219
R1220
48.000MHz
100K
47K
47K
100
L1202
L1203
33
33
USB33
USBGND L1201
R1203
R1204
BRXEN
BDATA
USBRST
USB33
BSRQ
BSCK
475/10
C1213
USB33 (2)
USB33
USBCTL
FLG
D
USBRST
FLMDO
USBGND 3. 3V
DM
DP
RX
TX
FLMDO
DM
USBRST
DP
FLASH WRITER
R1403
FLMDO
0R0
USBRST C1304
Q1401
R01 SYSPW
RT1P241M-11
R1301
USBGND MSVDD
15K
R1302 5.0V
3
2
1
USBGND
GND
EN
FLG
R5523N001B
R1406
R1407
15K
10K
10K
IC1301
VOUT
VIN
R1412
4
100
ACC5V
3
E C1301
R1416
100K
R1
L1301
C1302 VDCONT
15 14 13 12 11
R1
JH1301
4
1
I2C_ADDR0/SPI_CLK
VSS
USBGND 1
I2C_SCL/SPI_SIMO
I2C_SDA/SPI_SOMI
16 10
17 9
MODE/SPI_nSS
DDCONF
18 8 GND
ACCPW
19 7
nRESET
20 6
VCC
MSVD8 (1)
IC1402 D1301 MALS068X

8.0V
3
4
1
5
2
C1405
341S2159
R1415
D1302 MALS068X
100K
Ver2.0B R1
USBDM
USBDP
USB5V
C1162 47/16
USBG
C1161 R01
USBGND CN1301
2
USBGND 5
USBGND 4
3
VDCONT
F
USBDM
USBDP
USB5V
C1402 USB
IPOD CP R1 1301~1400
R1405 USBGND
1401 1500
A 2/2 2R7K USB:+0.6dBs
DVH-P6050UB/XN/CN5
96
1 2 3 4
5 6 7 8
POWER SUPPLY 1001 1100

A 2/2 TUNER AMP UNIT
(POWER SUPPLY) A
VIDEO5(10) VIDEO5V BUP

V33 (7) VIDEO3V L1041 FU1031 V5 Q1031
2SD2396 TUNER 3V SYS+B
1 2 IC1001
S-812C33AMC-C2N 5.0V CEK1280 TUN33 (1) IC1021 SYS+B (4) SYSB NJM2388F84
CONTROL
V33
UDZS5R6(B)
5 1 1A NJM2885DL1-33 8.4V
R1031
3R9K
>
VOUT
NC2 VSS
GND
GND
OUT
2
47/6R3
D1021
1 IN
VIN
1
VIN 1SR154-400
3
2
3.3V 4 3
R01
C1041
NC1 VOUT L1021
C1033
4
3
2
1
R01
8.4V
IC1041 UMD2N SYSPW
C1031
C1032
D1031
C1042 3.3V L1022 R1002
1C 3 4 1E
1 2B 2 5 1B 1K
2R2
4R7
C1002 R01
100/10
100/16
2E 1 6 2C
R1001
47K
Q1032
VIGND
C1021
C1001
C1003
C1023
USBR A 1/2 OSDPW
B
SYSPW RFGND AGND
SWVDD5 (1) SWDVDD VDD5V (5)

Q1061
SWDVDD 2SA1576A VDD1 Q1051 VDD 5VREG
USBL 2SD1664 1SR154-400
5.0V
BRST OSDPW 5.0V D1052
R1051
R1052
22K
(3216 1/4W)
820
BRST OSDPW
R1061
C1062
D1051 UDZS5R6(B)
2R2K
(3216 1/4W)
R001
BSRQ SYSPW R1063 VDD2
R1053
UMD2N
100/10
39
BSRQ SYSPW
R1062
22K 1C 3 4 1E
10K
BRXEN SWVDD
C1051 R01
R01
BRXEN SWVDD 2B 2 5 1B
BSCK ACCPW DGND 2E 1 6 2C
C1052
C1053
1000/16
C1054
BSCK ACCPW SWVDD Q1052
BDATA ILMPW ACCPW
BDATA ILMPW
USBRST COOLCONT
USBRST COOLCONT DGND
USBCTL DDCONF
DGND
USBCTL DDCONF ILM+B
FLG VDCONT ILM+B (1) ILMB Q1071
FLG VDCONT R1072 2SD1760F5
8.5V
1 FAN REG Q1081
R1074
2SD1664
330
Q1072
UMD2N 9.6V
C
R1081
4 1E 470
R1073
C1071
R1071
(3216 1/4W)
1/50
1E
1K
6 2C
3 1C
5 1B
2
4 330
1 1A
UDZS9R1(B)
UDZS10(B)
HZU12(B1)
1B
R1082
2 2B
UMD2N
5
C1081
C1082
C1083
D1081
D1082
Q1083
C1073
D1071
R01
10/16
R01
2C
R1
1 2E 6
1C 3
2B 2
2E 1
FANB
ILMPW FANG Q1082

DTC124EUA GND
DD CON ILMGND
GND
1101 1200 CN1081
2
1
SYSPW
BUP
COOLCONT
>
VDD5V FU1101
L1101 CEK1286 D1101
IC1141 R1141 1 2
S-1206B33-U3 R1107 R1109 3.0A RB060L-40
C1102
C1101
USB33 470/16 15uH
3300/16
27 680 22K D1102
3 VOUT
1SR154-400
C1105 R1111
1 VSS
D1142
2 VIN
RB060L-40
USB33 (2) R01 4R7K
USB33 R1113 GND R1101
USB5
ACC5V (5)
3R9K 470
D
3. 3V D1141 5. 0V DD5V > L1103 Q1105
2SJ529S
TP1101
R1115
R1
1 2
2R2
2 10K(B)
33K
1SR154-400 R1156 22uH 120K

D1105 RSX201L-30
FU1103 R1102
1
C1107 R1117 VR1101

R1125
R1119
2R7K
CEK1287 3 1
C1120
C1109
22 CCP1448
470/6R3
470/6R3
2R2
100/16
Q1103
3.5A 2200P 10K 9R1K

C1141
C1142
C1144
R1157
2 C R1103
2SD1767
22 OUT2 Q1101
13 R1121 68K C1103 DTC124EUA
R1127
C1115
R1158
Q1153
0R0
2R2
GND DD
220 100P
2SC4081
E B
1SS355
22
D1103
GND R1160
SYSPW
C1119
C1117
C1121
8
7
6
5
4
3
2
1
2R7K
R1159
MSVDD5 (1)
>
GND
OUT1 OUT2
VD5
DTC1 DTC2
IN+ ON/OFF
RT
CT
FB2
R1
L1102
IN-2
AN8011S
Q1151
IC1101
FU1151 10K
5.0V 2SA2060
LATCH
1 2 GND
>
VREF
C1112
VCC
VD8V (1)
IN-1
L1104
FB1
CEK1279 DD8V Q1104 GND

R1151
FU1102
10K
2SJ529S R1
0.75A 1 2 C1113
22uH
9
CEK1287
10
16
11
12
13
14
15
R1124
2R7K
3.5A 4R7 C1104

R1132
R1154
0R0
RSX201L-30
OUT1
100/6R3
1 8
2 C 4R7
C1151
C1116
R1106
R1104
Q1102
0R0
120/10
13 R1122
D1107
R1126
C1114
2SD1767
15K
DDGND
0R0
2R2
2 7
1SS355
B 220 R1105
D1104
3 6 E
6R8K
4 5
E
68
R1153 C1106 R1112 GND
VDCONT Q1152 GND
2SC4081 R001 4R7K R1116
5R6K R1108 R1110
R1152
01 10K ACC5V Q1106 36K 5R6K
220K
C1108 R1118
6 TR6 TR1 1 2200P 10K
R1114
R1120
C1110
3R9K
R001
33K
R1130
TR2 2
47K
GND
DDCONF
5
ACCPW
IC1161 4 TR5 3
BA00DD0WHFP TR4 TR3 GND
MSVD8 (1) IMH1A
VD8
GND
Vout
ADJ
CTL
Vcc
8.0V GND
5
4
3
2
1
R1161
C1162 47/16
C1161 R01
1
1K
30K
R1162
5R6K
C1163
R1163
1
VDCONT
F
: The power supply is shown with the marked box.
GND
A 2/2
DVH-P6050UB/XN/CN5
5 6 7 8
97
1 2 3 4
10.3 KEYBOARD UNIT
1 SEG65 B PUSH D
SEG39
SEG40
SEG41
SEG42
SEG43
SEG44
SEG45
SEG46
SEG47
SEG48
SEG49
SEG50
SEG51
SEG52
SEG53
SEG54
SEG55
SEG56
SEG57
SEG58
SEG59
SEG60
SEG61
SEG62
SEG63
SEG65 2 SEG64
SEG64 3 SEG63
SEG63 4 SEG62
SEG62 5 SEG61
SEG61 6 SEG60
SEG60 7 SEG59 C
SEG59 8 SEG58
SEG58
100
9 SEG57
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
SEG57 10 SEG56
SEG56 SEG55
B SEG55 11 1 75
SEG39
SEG40
SEG41
SEG42
SEG43
SEG44
SEG45
SEG46
SEG47
SEG48
SEG49
SEG50
SEG51
SEG52
SEG53
SEG54
SEG55
SEG56
SEG57
SEG58
SEG59
SEG60
SEG61
SEG62
SEG63
12 SEG54 SEG38 SEG64
SEG54 13 SEG53
SEG53 14 SEG52 SEG37 2 74 SEG65
SEG52 SEG51 SEG38 SEG64
SEG51 15 3 SEG37 SEG65 73
16 SEG50 SEG36 KYDT
SEG49 17 4 72
18 SEG48 SEG35
SEG47 19 5 71
20 SEG46 SEG34 DPDT
SEG45 21 6 70
22 SEG44 SEG33
SEG43 23 7 69
24 SEG42 SEG32 KST1
SEG42 SEG41 SEG32 KST1
SEG41 25 8 68
26 SEG40 SEG31 KST2
SEG39 27 9 67
28 SEG38 SEG30 KST3
SEG37 29 10 66
30 SEG36 SEG29
31
SEG35 32 SEG34 SEG28 11 KEY AND LCD DRIVER 65
33
CAW1955
SEG33 34 SEG32 SEG27 12 64

C SEG31 35 13 IC2101 63
36 SEG30 SEG26 KDT1
SEG30 SEG29 SEG26 KDT1
SEG29 37 14 PD6569A 62
38 SEG28 SEG25 KDT2
SEG27 39 15 61
40 SEG26 SEG24 KDT3 SWVDD
SEG25 41 16 60
42 SEG24 SEG23 R
SEG23 43 17 59
LCD2101
44 SEG22 SEG22
SEG22 SEG21 SEG22 ROUT3
SEG21 45 18 58
46 SEG20 SEG21
SEG20 SEG19 SEG21 ROUT2
SEG19 47 19 57
48 SEG18 SEG20
SEG18 SEG17 SEG20 REM
SEG17 49 20 56
50 SEG16 SEG19
SEG16 SEG15 SEG19 VSS
SEG15 51 21 55 R2102 0R0
52 SEG14 SEG18
SEG14 SEG13 SEG18 X1
SEG13 53 22 54 X2101
54 SEG12 SEG17
SEG12 SEG11 SEG17 X0
SEG11 55 23 53
56 SEG10 SEG16
SEG10 SEG9 SEG16 RESET
SEG09 57 24 SEG15 MOD1 52 CSS1547
58 SEG8 SEG15
SEG08 SEG7 SEG14 MOD0 5.00MHz
POUT1
SEG13
SEG12
SEG11
SEG10
59
COM3
COM2
COM1
COM0
D SEG07 25 51
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
SEG0
60 SEG6 SEG14
VCC
RXD
TXD
SEG06 SEG5
V1
V2
V3
SEG05 61
62 SEG4
SEG04 63 SEG3
SEG03
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
64 SEG2 DGND
SEG02 65 SEG1 DGND
SEG01 66 SEG0
SEG00 COM0 IC2102
DPDT
67
KYDT
R2106
SEG13
SEG12
SEG11
SEG10
COM00 COM1
COM3
COM2
COM1
COM0
68 REM
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
SEG0
COM01 69 COM2 1
COM02 70 COM3 SWVDD 2R2 GND
COM03 2
R2105
VCC
3
KST1
KST2
KST3
R01
R01
100
R1
GP1UX51RK
C2117
C2101
C2102
C2116
1
1
2
2
CSG1155
CSG1155
CSG1155
10
S2101
S2104
S2107
3
3
4
KDT1 SRC DISP

E RDM
DGND
1
1
2
2
CSG1155
CSG1155
CSG1155
S2102
S2105
S2108
3
3
4
KDT2 BAND SW EQ
1
1
2
2
CSG1155
CSG1155
CSG1155
S2103
S2106
S2109
3
3
4
KDT3 COMP CLOCK LIST

F
B
DVH-P6050UB/XN/CN5
98
1 2 3 4
5 6 7 8
B KEYBOARD UNIT
A SWVDD
SW JOYST(V)
over~under
A(UP) 0.00 0.50 R2109 1K MULTI-CONTROL
B(LEFT) 0.50 1.30
PUSH D C(DOWN) 1.30 2.30 R2108 10K
D(RIGHT) 2.30 3.50
PUSH 3.50 4.60 S2110 R2114
RELEASE 4.60 5.00
1K
CN2101
C Phase_B 10 1 Phase_A
Push 9 2 Enc_Com ILBGND
ILBKGND 12
D8 3A JOYSH
R2103
11 B
47K
C7 4B SWVDD 4.9V
10
GND 6 5 Com 9
R2104
IL+B 8.4V
15K
T
8
R2111
2R7K
CSX1120
T
ILBKGND
R2107
DGND
DGND
ROT1
7 C
6R8K DGND KYDT
6 CN1972
R2115 1K 5
ROT0
MALS068X
MALS068X
4
R2116 1K DPDT
3
CSENS
2
22K
R1
D2101
D2102
1
D2115 D2106 R2125
R2120
C2118
NESW505C-5273 NESW505C-5273 120 C
ILBKGND ILBKGND DGND
SWVDD
R2113
680 R2137 0R0

CL-197HB1-D(CDE)
R0
D2107 D2108 R2121
D2105
CL-197HB1-D(CDE) 470
CL-197HB1-D(CDE)
CSS1547
.00MHz
D2109 D2110 R2122 D
CL-197HB1-D(CDE)
D
IC2102 D2111 D2113 R2123
REM
1 Q2103 CL-197HB1-D(CDE) 1K
GND DTC114EUA CL-197HB1-D(CDE)
2
VCC
3 D2112 D2114 R2124
GP1UX51RK
CL-197HB1-D(CDE)
ILBKGND
ILBKGND BLUE ILM
B
DVH-P6050UB/XN/CN5
5 6 7 8
99
1 2 3 4
10.4 DVD CORE UNIT (1/2) (GUIDE PAGE)
A
D-a 1/2
D 2/2
RF SIGNAL
F FOCUS SERVO LINE F
T
TRACKING SERVO LINE
1
C
CARRIAGE SERVO LINE
S T
SPINDLE SERVO LINE
2
T
B
F
C
CWW1465
D 1/2
DVH-P6050UB/XN/CN5
100
1 2 3 4
5 6 7 8
A
D-b 1/2
D 1/2 DVD CORE UNIT (1/2)

F
1
D 2/2
2
D 2/2 B
PICKUP UNIT(SERVICE)(DP8)
1 C
S
C
C
S
M2,M3
S 3 S
4 C
3
2 4
T
F T
5 F M1
D 2/2
E
D 2/2
CWW1466
D 1/2
DVH-P6050UB/XN/CN5
5 6 7 8
101
F
E
B
A
D
C
102
D-a D-b
D-b 1/2
1
1

F
1
T
2
D 2/2
2
2
D 2/2
DVH-P6050UB/XN/CN5
3
3
S
C
4
4
PICKUP UNIT(SERVICE)(DP8)
F
F
C
5
5
S
M2,M3
S 3 S
4 C
6
6
2 4
T
F T
5 F M1
DVH-P6050UB/XN/CN5
7
7
D 2/2
E
D 2/2
CWW1466
8
8
D-a D-b
D-b 1/2
103
E
A
D
C
F
B
F
E
B
A
D
C
104
D-a D-b
D-a 1/2
D-b 1/2
1
1
D 2/2
RF SIGNAL
F FOCUS SERVO LINE
T
1
TRACKING SERVO LINE

C
CARRIAGE SERVO LINE
S
SPINDLE SERVO LINE
2
2
2
DVH-P6050UB/XN/CN5
3
3
4
4
5 6 7 8
D-b 1/2
CWW1465
B
D-a D-b
D
D-a 1/2
DVH-P6050UB/XN/CN5
5 6 7 8
105
1 2 3 4
10.5 DVD CORE UNIT (2/2)
D 1/2
D 1/2
D 1/2
D
D 1/2
A 1/2
CN311
D 1/2
D 2/2
DVH-P6050UB/XN/CN5
106
1 2 3 4
5 6 7 8
D
A 1/2
CN101
D 1/2
D 1/2
D 1/2
D 1/2
D 2/2
DVH-P6050UB/XN/CN5
5 6 7 8
107
1 2 3 4
10.6 COMPOUND UNIT(A) AND COMPOUND UNIT(B)
A E COMPOUND UNIT(A)
6 R1298 Q1299 R1299
0R0 0R0
CPT231SCTD 8cm
D 1/2 5 CSN1070
S1205
CN1301
DISC SENS
DISC SENS S1203
4 CSN1069
CSN1070
8cm S1202 S1204
3 CSN1069
B
12cm S1201
2 CSN1069
F COMPOUND UNIT(B)
CLAMP
CSN1067
D 1/2
E F
DVH-P6050UB/XN/CN5
108
1 2 3 4
5 6 7 8
10.7 WAVEFORMS
- DVD CORE UNIT Note:1. The encircled number denote measuring points in the circuit diagram. 1 RF
2. Reference voltage: 1.65 V(TD1,FD1)(=VHALF) 2 TD1
2.2 V(RF)(=VREF) 3 A+, A-
A
In the waveform, it is seeing on the GND standard. 4 B+, B-
Offset of 1.65 V or 2.2 V is put in. 5 FD1
1RF 0.2 V/div(AC) 0.1 us/div 1RF 0.2 V/div(AC) 50 ns/div 1RF 0.2 V/div(AC) 50 ns/div
CDRF(x 4 CLV) CDRF(x 20 CAV Inner peripheral) CDRF(x 20 CAV Peripheral)
1RF 0.2 V/div(AC) 50 ns/div 1RF 0.2 V/div(AC) 50 ns/div 1RF 0.2 V/div(AC) 50 ns/div
DVDRF(x 1.3 ZCAV) DVDRF(x 5 CAV Inner peripheral) DVDRF(x 5 CAV Peripheral)
1RF 0.5 V/div 100 us/div 2TD1 0.1 V/div 100 us/div 2TD1 0.1 V/div 100 us/div
DVDRF(BD1 mm) Interval FWD Interval REV
2.2 Vt VHALF VHALF
DVH-P6050UB/XN/CN5
5 6 7 8
109
1 2 3 4
2TD1 0.1 V/div 500 us/div 2TD1 0.1 V/div 500 us/div 2CH1 : TD1 0.5 V/div 10 ms/div
Multi 32 FWD Multi 32 REV 3CH2 : A+-A- 10.0 V/div 10 ms/div
(LPF of the oscilloscope is set to 10 kHz)
4CH3 : B+-B- 10.0 V/div 10 ms/div
(LPF of the oscilloscope is set to 10 kHz)
Traverse 900 FWD(Short)
VHALF
VHALF VHALF
B
0t
0t
2CH1 : TD1 0.5 V/div 10 ms/div 2CH1 : TD1 0.5 V/div 20 ms/div 2CH1 : TD1 0.5 V/div 20 ms/div
3CH2 : A+-A- 10.0 V/div 10 ms/div 3CH2 : A+-A- 10.0 V/div 20 ms/div 3CH2 : A+-A- 10.0 V/div 20 ms/div
(LPF of the oscilloscope is set to 10 kHz) (LPF of the oscilloscope is set to 10 kHz) (LPF of the oscilloscope is set to 10 kHz)
4CH3 : B+-B- 10.0 V/div 10 ms/div 4CH3 : B+-B- 10.0 V/div 20 ms/div 4CH3 : B+-B- 10.0 V/div 20 ms/div
(LPF of the oscilloscope is set to 10 kHz) (LPF of the oscilloscope is set to 10 kHz) (LPF of the oscilloscope is set to 10 kHz)
Traverse 900 REV(Short) Traverse 5 000 FWD(Long) Traverse 5 000 REV(Long)
C
VHALF VHALF VHALF
0t 0t 0t
0t 0t 0t
3CH : A+-A- 10 V/div 50 ms/div 2TD1 0.5 Vdiv 20 ms/div 5FD1 0.5 V/div 1 ms/div
4CH2 : B+-B- Play TD Focus Close
ID search Inside t Outside
D
0t
VHALF VHALF
0t
E
5FD1 0.5 V/div 20 ms/div 5FD1 0.5 V/div 500 us/div 5FD1 0.5 V/div 500 us/div
Play FD Focus Jump L0tL1 Focus Jump L1tL0
VHALF VHALF VHALF
DVH-P6050UB/XN/CN5
110
1 2 3 4
5 6 7 8
DVH-P6050UB/XN/CN5
5 6 7 8
111
1 2 3 4
11. PCB CONNECTION DIAGRAM

11.1 TUNER AMP UNIT
A
NOTE FOR PCB DIAGRAMS >FU283 (A,21,118) Poly Switch 40 A MINISMDC075F/24
1.The parts mounted on this PCB >FU1101 (A,80,8) Fuse 3 A CEK1286
include all necessary parts for 150 >FU1102 (A,30,30) Fuse 3.5 A CEK1287
several destination. >FU1103 (A,21,17) Fuse 3.5 A CEK1287
For further information for >FU1151 (A,11,43) Fuse 750 mA CEK1279
respective destinations, be sure
to check with the schematic dia-
gram. 140
2.Viewpoint of PCB diagrams AUX
RCA OUT
Connector Capacitor IP-BUS CN282 CN231
CN131 1
130
1 5
SIDE A 1
C231
R2 9 1 R302 C289 C291 R2 9 2 C290 R290 D281
R231 R233 C261
R304 R287 R289 C294 R288 C292 1 5
B C293
R303 R281 R283
R285 R232
SIDE B Q131 R135
FU283
R286 R282 R284
R137
FU281
1
R136
C288
P.C.Board Chip Part 120 C285 C281 C283 C286 C282 C284
L131
C133
R138 C260
Q253
A
C206
TUNER AMP UNIT 110 C222
C220 R207
C208
C218
1
R261
C224
R104
VIDEO C202
C259
L201 C217
CN281
1
C205
100 C221
C213 C219 Q251
C223 R258
E
C225 FU171 1
C595 C201 C203 C215
R171 R256
C
R173 R172 R255
Q1031 D1031 C172 C171
Q1032
90 C1033 VR571 C572 5
1
C594
IC171
C596
R1031 R174
C1032 1
E
C173
1
E
R577
Q171 L171
C501
80 C1003 C598
X502
1
X50
Q501
C551
D162 C166 1 IC501
L504
1
5
IC1001 R165 E C527
R501
D161
R527
R504
C
IC191
1
5 R508 R523
70 C1001 R163 C165
5
L551
TC501 C524
IC502
C
C167 L503 1
C507
R509 C518
R526
IC161 C194
R161 L191
C164 C162 C554 R524 C508 5
C163 C195 L501
D
R507
C525
1 R530
1
D101
USB R101
Q101
C521 C517
1
C106 Q102 C519 C514

60 C1042 JH1301 R528
15 10 5 1
1
IC1041 C107 C553 C520 C509

35 R107 20
60
25 15 5 1
L1041 R551 R529 C510
25
C571 R571 IC504 55
CN101
1
C1041 VR551
D CN1901 R510
R522
1
30
50
C1151 C1162
40 30 20 10 Q551 35 40 45
50 C552
R552
C512
1
C513 R535
10
IC102 IC101 E R516

R553
R534
10
5
R554
1
FU1151 D551
C515 R518 R519 R517
1
C1118 C101
R102 C105 L101
L533
C1114
40 D1107
L1104
Q1104 Q1102
Q1151 C1116
R1124 E
E R1151 E
Q1106 R1126
FU1102 R1130 D1104
5
R1154
30 R1122
1
R1104
R1152 1 C1112 C1102
C1117 R1105
E
15 10
C1113 L1102 R1101
Q1152 C1104
IC1101 C1111
R1153 R1132
C1119
1 5
20 C1103
R1102
Q1101
C1121
FU1103 L1103
E
R1103 L1101
1 R1121
1
VR1101
C1115
D1106
Q1103
10 DETACH Q1105
S701 E FU1101
D1105
R1125
R1127 RESET
1 S601 1
D1103
F Y 1
0 10 20 30 40 50 60 70 80
A X FRONT
DVH-P6050UB/XN/CN5
112
1 2 3 4
5 6 7 8
A
SIDE A
CN402 1
Y401
1
CORD ASSY ANTENNA
OPT-OUT ZNR401
L401
CN751
CN312 D CN1852
5
IC251
15 13 11 9 7 5 3 1
10 20 CN401
16 14 12 10 8 6 4 2
C722 C723 C314
FM/AM TUNER UNIT

D754 L311 1
IC311
10
R316 C312 Q311
C261 5 D721
E
1 15 25
B
10
R314
1
5 C409 C408
D753
IC721 R313 1
R315
R318
5
C721
CN311
C260
OPT-IN
R721 L403
L731
C731 R260
R734 L404
R732
D731
R733 C405
C401
261
CN1081
15
C259
1
C406
C404
R1082 C1081
Q251 L751
258 Q1081 Q402
E
E
C1082
JH2 L402
20
1
R256
C
R255 1 R1081
JH1 C1083
1
Q1083 Q401
Q1082
1
1 D1081 E
D1082
L405 C407
C1223 D331 FAN
1
C1224 R331
C501 R332 MOTOR
X502 X501 D332
R1224 IC1402
CN331
1
15 C1024
R1225 R623
IC501
10
L504 R650 C615

1
5
R651 R622
20
C527 R1211
R501
R527
R504
C526 C612
15 C1210 L602
R1411
C1404
IC502 R520 C1401 C1402 R684

TC501 C1403 R639 R628
1
C524 1 C516 R1201

R525 X1401
40 35
R658
C1221 C1216
C507
IC603
R526
C1203
R649
30
1
C508 L506 R1404 R663

5
5
L501 C522 R664 R655
R1410 D
5
C1222
R507
C525
25
IC1401
R1409 R640 R654
C517 C1204
10
R1123 R656
75 70 65 60 55
R1408
15 10 5 1 R511 R1228 R1405 15 20 CN601
50
C1215
R1206
R1207
10
R1218
R1406
R1401
R1217
R1402
R1407
R1412
20 C1212
80
60 C1202
45
CN1302
5
R512 R1222
R1213 R1208
E R1230
25
IC504 R672
85
55
40
C1218 R1216 C1304

C1213
30 R1210 R673 IC601

90
R513
35
50
L1201 R610 R601
35 40 45 R1215
C1301
Q1401 R1403
95
30
R514 IC1301
USB R608 R620 R615 R609
100
1
C1302 L601
CN1301 C1303 1 5 10 15 20 25 IC602
1
R518 R519 R517

R605
R607
R662
D1301 R633
C609 C614 C604
R653
R1302
R645
R603
C603 1
C610
1
R657
L1301 R643 C602 D601
R1203 R630
5
X601 C601 R646

D1101 D1302 R1204 R606
R642 1 R665
R634
R1301 R671
E
R632 D1052
D1102 C1144
D1051 Q1052
C1052
C1053
R1073 C1051 C1054
R1101 C1072 R626
R1074 R1072 R1051 1
E
E
R1132 C1101 C1071
Q1071 Q1051
R1071 Q1061
C1061
E
R1063
D703
D701
D702
D704
D707
D709
1
D708
10
R644
L701 BZ601
1 5
ESET
S601
FU1101
1
C702
C703
C701
CN701 C CN1971
F
70 80 90 100 110 120 130 140 150 160 170

FRONT A
DVH-P6050UB/XN/CN5
5 6 7 8
113
1 2 3 4
A TUNER AMP UNIT

C751 C262
1
D751
R259 Q252
E
D752
D251
R257
R407 C411
1
R406
R405
B
C257
C256
R404 D311 D722
C258
C255
D312 R312 C313
R403
R317
R402
C311
1 R311 C264
C410 D741 C251 C2

C263
R744
C253
L741
C254
R743 C741
C403 Q741
R742
E
R401
R731 Q731
R713 R716
1 C711
C402 R711
Q711 R714 D711
5 R712 D712
R410
R408
R411
C
R409
R415
R412
C417
C416
R413
C412
C413 IC401 C418
5
C420
C415
10
R414
C414 C419
C1021
D1021
C1023 L1021
C1405
IC1021 C1022 C502
R1417 R1416
R1415
L1022
1
C1219
105 100 95 90 85 80 75
115 110
C1220
70
R1223
65
15
R621 C1217 IC534
D
135 130 125 120
60
C607 R1226
20
C613 R687 C606 R1227
55
IC1201
1
L534
C611 R685 C1214
50
R612 L535
TESTIN X1202
1
R686 R681
45
C617 C618
R638 R631 R676
140
5
40
R652 R611 IC535

R682
R647
PCL
R675
R648
1 5 10 15 20 25 30 35
R659
R619
R627
10
R636
R618
C608 R637
C1201 C5
R624 C1206
C605 R604 C1209 R1220
R617 R680 R1202
R1209
C616 R674 R678 R629 R1219

L1202
L532
R679
L1203 C1225
R668
C619 R669 X1201 C1205

1
R625 R670
R602 R613 R1214
1
R641 R683 C1208 C1211 R1229

R667 R1231
IC1202
R666 R1232
C1226
5
R635 R677
C1207 R1221
R661 R1414
R614
R660 R1413
E R616 R1052
D1201
D1141
R1053
C1141
D1142 IC1141
R1141
C1142
R703
R706
R707
R705
R701
Q1072 D1071
R1062 C1062
1
1
C1143 C1122
R1061 C1073 R710
R702
R709 R708
R704 E
Q701 Q702
E
1
170 160 150 140 130 120 110 100 90

A
DVH-P6050UB/XN/CN5
114
1 2 3 4
5 6 7 8
A
SIDE B
>FU 284 (B,11,107) Poly Switch 40 A MINISMDC075F/24 150
>FU 1031 (B,17,79) Fuse 1 A CEK1280
252
D251
140
C131 R131 R134 C135
C299 R133
R132 C134
1
1 1
130
D233
B
C257
C256
D234 D231
C258
C255
Q282 Q281 Q283

D232 C295
C265 1
1
C287
R293 R295
Q284
R300
120
C264 R299 R297 R296 R301 R139
R262 5
1
C251 C252 R298 C214 R204 R202

C263
C253
C254
R209 C216 R203

D282 C210 R206 IC131
R208 R205
C212
R201
1
FU282 FU284
110
25 20 15
C296 C298
IC201 D284 D283
1
100
1 5 10
C211 C207 C204 R598
R597
C209
L592 1
R151 Q286 C
R152
FU151 E
R153
R596
IC5921
R294
90
C574
C153
1
R576
C154
R595
Q572
C575 5
Q285
R575 R594 C597
E
R574 IC152 C158

E
R591
R592
R578
Q571 R572 C1031

C593 1 1
C503
C592
R503
C193
80
C506
R506
L591
L151
R573 C573
IC503
1
1
Q502 L571 R593
FU1031
1
5
C191 C591
IC591
R505
C502 5 L505
C505
R502 R515
C504 L531
C531
R533 70
45
40
35
30
25
C1002
R1002
10
R162 R103
15
IC534 C103 R1001

D
5
L161 C102
20
L534 C534
IC531
60
L535 C535
R115
C108
R116
R112
C110
C109
R113
C113 R1159
20
1
C523 C111
R111 R1160
5
IC535 E
15
R521
R1158
R1157
R1156
C1120
10
C532 L502
C511
R106
C112
Q1153
C1161
50
1
R110
10
15
20
5
R109
20 15 R531 R532 C1163
R108
L532 20 15 R1161 R1163
C533 IC1161
IC532
IC533 R1162
5 1
1 5 10 40
1 5 10
R1118
E
C1108
R1110
C1110 R1108
R1112
R1120
R1116 R1114
C1106
R1128
30
R1106
C1141
1
R1117
R1129
R1113
C1122 R1119 R1115 R1109 20
R1107
R1111
C1105
C1109 C1107
10
Y F
90 80 70 60 50 40 30 20 10 0
X A
DVH-P6050UB/XN/CN5
5 6 7 8
115
F
E
B
A
D
C
116
B
DISPLAY/SCROLL
B
1
1
1
1
40 S2101 SOURCE/OFF S2104
D2119
LCD
D2120
D2109 LCD2101
D2110
C2110 C2109 1 5 10 15 20 25 30 35 40 45 50 55 60 65 70
C2106
30 5
10 D2115 D2106
C2115
S2110
KEYBOARD UNIT
20 MULTI-CONTROL
11.2 KEYBOARD UNIT
D2117
C2107
D2107
D2124
C2114
D2118
D2108 C2108 CLOCK/DISP RDM EQ LIST
D2114 C2105 C2113
1
COMP
1
1
C2111
1
10 D2116 D2123 D2121 D2122 C2112
2
2
S2102 S2105 IC2102

S2103 D2105 D2113 D2111 D2112
1
1
1
1
BAND/ESC SW/BASS Remote IC S2106 S2107 S2108 S2109

Y
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
SIDE A
X 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

B
DVH-P6050UB/XN/CN5
Y
3
3
R2105
R2139
X2101
C2117 R2138 R2126
E
R2121 R2124
R2106 R2119
10 R2102 R2123
R2122 R2136 R2135
1
R2118 Q2106 Q2103

R2129 R2130 75 70 65 60 55 C2116
R2113 1
C2102 C2118
50 R2114 1
R2108 R2109
80 45
C2101 Q2104
R2120
Q2105
20 85 40
IC2101
R2137
R2125
KEYBOARD UNIT
R2107 90 35 10 2
R2116
R2112
95 30
R2115
R2111 CN2101
100
11 5 1
30 1 5 10 15 20 25
R2103
R2131 D2125
R2132 R2104 D2101
R2134 R2133 D2102
4
4
R2128 R2127
40
C
SIDE B
CN1972
5 6 7 8
11.3 PANEL UNIT
C PANEL UNIT SIDE A

A
40
B CN2101
S1970
EJECT
10
30
B
CN1972
1 5
20
D1970
10
Y
C
0
10 20 30 40 50 60 70 80
X
C PANEL UNIT SIDE B
D
X
0 10 20 30 40 50 60 70 80
Y D1972
10 D1974
C1971
CN1971 D1975
D1971
10 R1970 R1971
1 5
D1977
D1976
C1970
R1974 E
D1973
20
A CN701
30
40
F
C
DVH-P6050UB/XN/CN5
5 6 7 8
117
1 2 3 4
11.4 DVD CORE UNIT
A
D DVD CORE UNIT
80
70
60
50 PICKUP UNIT
C
(SERVICE)
M2, M3
40
F
30
M1
20
10
Y
A
CN311
F
0
10 20 30 40
X
D
DVH-P6050UB/XN/CN5
118
1 2 3 4
5 6 7 8
SIDE A
A
A
CN101
UNIT
E) C
0 50 60 70 80 90
D
DVH-P6050UB/XN/CN5
5 6 7 8
119
1 2 3 4
A
D DVD CORE UNIT
90 80 70 60 50
D
DVH-P6050UB/XN/CN5
120
1 2 3 4
5 6 7 8
SIDE B
A
80
70
60
50 C
40
30
20
10
F
0
50 40 30 20 10
X
D
DVH-P6050UB/XN/CN5
5 6 7 8
121
1 2 3 4
11.5 COMPOUND UNIT(A) AND COMPOUND UNIT(B)
E COMPOUND UNIT(A) F COMPOUND UNIT(B)

A Q1299
R1298
R1299 CLAMP
S1205
8cm
D
B
S1204
DISC SENS
S1203
DISC SENS
S1202
8cm
E
12cm
S1201
6 1
F
D CN1301
E F
DVH-P6050UB/XN/CN5
122
1 2 3 4
5 6 7 8
12. ELECTRICAL PARTS LIST

NOTE:
Parts whose parts numbers are omitted are subject to being not supplied. A
The part numbers shown below indicate chip components.

Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Meaning of the figures and others in the parentheses in the parts list.
Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding B
PC board.
IC 301 (A, 91, 111) IC NJM2068V
The expression of the unit in this manual is shown by u instead of µ. Please do not make a mistake.
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
IC 191 (A,50,72) IC BA7611AF
Unit Number : CWN3298(CN5) IC 201 (B,48,103) IC PML018A
Unit Number : CWN3294(RC) IC 251 (A,88,133) IC PAL007C
IC 311 (A,143,125) L-MOS And Gate TC7SET08FUS1
Unit Number : CWN3295(RD) IC 401 (B,145,86) IC NJM2794RB2
C
Unit Number : CWN3296(RI) IC 501 (A,79,76) IC TC7SU04FU
IC 502 (A,80,68) IC TC7WB383FK
Unit Name : Tuner Amp Unit IC 503 (B,76,76) IC TC7SU04FU
IC 504 (A,74,55) IC PDC150A
Unit Number : IC 591 (B,27,79) IC NJM2505AF
IC 592 (B,25,87) IC TK15405BMI
Unit Number : CWN3429 IC 601 (A,145,53) IC PEG456A
IC 602 (A,165,42) IC BD4835G
Unit Name : Panel Unit IC 1001 (A,8,72) IC NJM2388F84
IC 1021 (B,160,75) IC NJM2885DL1-33
Unit Number : YWX5005
IC 1041 (A,9,56) IC S-812C33AMC-C2N D
Unit Name : DVD Core Unit IC 1101 (A,46,24) IC AN8011S
Unit Number : CWX3595 IC 1141 (B,98,24) IC S-1206B33-U3
IC 1161 (B,20,37) IC BA00DD0WHFP
Unit Name : Compound Unit(A) IC 1201 (B,121,61) IC PE5647B
Unit Number : CWX3559 IC 1301 (A,124,48) IC R5523N001B

IC 1402 (A,121,75) IC 341S2159
Unit Name : Compound Unit(B) Q 101 (A,37,62) Transistor UMD3N
Q 102 (A,45,61) Transistor IMH23
Q 131 (A,14,120) Transistor UMF23N
A
Unit Number : CWN3298(CN5)
Q
Q
171
251
(A,58,84) Chip Digital Transistor DTA124EUA
(A,72,97) Chip Transistor DTC124EUA E
Q 252 (B,94,141) Transistor 2SC4081

Unit Number : CWN3294(RC) Q 253 (A,67,112) Digital Transistor DTC144EUA
Unit Number : CWN3295(RD) Q 281 (B,44,121) Transistor RT3C99M
Unit Number : CWN3296(RI) Q 282 (B,52,121) Transistor RT3C99M
Unit Name : Tuner Amp Unit Q 283 (B,39,121) Transistor RT3C99M
Q 284 (B,59,118) Transistor UMD3N
MISCELLANEOUS Q 285 (B,17,88) Transistor UMD2N
Q 286 (B,17,92) Transistor DTC323TU
IC 101 (A,47,47) IC TC74VHCT08AFTS1
IC 102 (A,37,47) IC TC74VHC08FTS1 Q 311 (A,148,124) Transistor 2SA1579
IC 131 (B,13,114) IC HA12241FP Q 501 (A,67,76) Chip Digital Transistor DTA124EUA F
IC 152 (B,21,84) IC NJM2505AF Q 502 (B,69,76) Transistor UMD2N
IC 171 (A,62,88) IC NJM2505AF Q 551 (A,60,49) Transistor 2SC4081
Q 571 (B,39,83) Chip Transistor 2SA1576A
DVH-P6050UB/XN/CN5
5 6 7 8
123
1 2 3 4
Q 572 (B,31,86) Chip Transistor 2SA1576A D 1103 (A,59,7) Diode 1SS355
Q 701 (B,99,12) Chip Transistor 2SA1576A D 1104 (A,58,33) Diode 1SS355
Q 702 (B,96,12) Chip Transistor DTC114EUA D 1105 (A,39,10) Diode RSX201L-30
Q 711 (B,144,102) Transistor IMX1 D 1107 (A,39,37) Diode RSX201L-30
A
Q 731 (B,143,110) Transistor 2SC4081 D 1141 (B,97,30) Diode 1SR154-400
Q 741 (B,146,112) Chip Transistor 2SA1576A D 1142 (B,109,25) Diode 1SR154-400

Q 1031 (A,9,88) Transistor 2SD2396 D 1201 (B,120,33) Diode MALS068X
Q 1032 (A,18,89) Transistor UMD2N D 1301 (A,120,43) Diode MALS068X
Q 1051 (A,141,21) Transistor 2SD1664 D 1302 (A,120,35) Diode MALS068X
Q 1052 (A,146,28) Transistor UMD2N ZNR401 (A,157,141) Surge Protector CSA30-201N
Q 1061 (A,134,19) Chip Transistor 2SA1576A L 101 (A,49,43) Inductor CTF1473

Q 1071 (A,107,22) Transistor 2SD1760F5 L 131 (A,9,117) Inductor CTF1473
Q 1072 (B,115,22) Transistor UMD2N L 151 (B,19,79) Inductor CTF1473
Q 1081 (A,132,96) Transistor 2SD1664 L 171 (A,62,84) Inductor CTF1473
B Q 1082 (A,139,88) Chip Transistor DTC124EUA L 191 (A,51,67) Inductor CTF1379
Q 1083 (A,131,89) Transistor UMD2N L 201 (A,35,101) Inductor LCTAW2R2J2520

Q 1101 (A,46,17) Chip Transistor DTC124EUA L 311 (A,141,126) Inductor CTF1389
Q 1102 (A,58,38) Transistor 2SD1767 L 401 (A,162,141) Inductor LCTAW220J2520
Q 1103 (A,59,12) Transistor 2SD1767 L 402 (A,153,94) Inductor LCTAW2R2J3225
Q 1104 (A,46,37) Transistor 2SJ529S L 403 (A,154,114) Chip Coil LCTAW1R0J2520
Q 1105 (A,47,10) Transistor 2SJ529S L 404 (A,159,112) Chip Coil LCTAW100J2520

Q 1106 (A,47,31) Transistor IMH1A L 501 (A,74,64) Chip Coil LCTAW330J2520
Q 1151 (A,11,37) Transistor 2SA2060 L 502 (B,62,48) Inductor LCTAW220J2520
Q 1152 (A,12,27) Transistor 2SC4081 L 503 (A,61,67) Inductor CTF1379
Q 1153 (B,26,53) Transistor 2SC4081 L 504 (A,69,74) Inductor CTF1379
C
Q 1401 (A,116,52) Transistor RT1P241M-11 L 505 (B,66,73) Inductor CTF1379
D 101 (A,42,61) Diode DAP202U L 506 (A,85,67) Inductor CTF1379
D 231 (B,58,124) Diode MALS068X L 551 (A,56,68) Inductor CTF1473
D 232 (B,61,124) Diode MALS068X L 571 (B,34,80) Inductor CTF1473
D 233 (B,60,124) Diode MALS068X L 591 (B,22,81) Inductor LCYC100K2125
D 234 (B,63,124) Diode MALS068X L 592 (B,25,94) Inductor CTF1383

D 251 (B,94,139) Diode HZU8R2(B2) L 601 (A,166,45) Chip Coil LCTAW100J2520
D 281 (A,67,125) Diode 1SS355 L 701 (A,95,11) Chip Coil LCTAW100J2520
D 282 (B,62,116) Diode DAN202U L 731 (A,140,114) Inductor CTF1295
D 551 (A,61,46) Diode 1SS355 L 741 (B,141,115) Inductor LCTAW2R2J2520
D D 601 (A,164,39) Diode 1SS355 L 751 (A,113,103) Choke Coil 600 uH CTH1280
D 701 (A,121,17) Diode MALS068X L 1021 (B,142,75) Inductor LCTAW2R2J3225
D 702 (A,122,17) Diode MALS068X L 1022 (B,146,75) Inductor LCTAW2R2J3225
D 703 (A,119,17) Diode MALS068X L 1041 (A,14,56) Inductor CTF1379
D 704 (A,124,17) Diode MALS068X L 1101 (A,68,16) Inductor CTH1253
D 707 (A,114,17) Diode MALS068X L 1102 (A,58,25) Inductor LCYA100J2520

D 708 (A,112,17) Diode MALS068X L 1103 (A,30,15) Coil CTH1303
D 709 (A,110,17) Diode MALS068X L 1104 (A,32,37) Coil CTH1303
D 711 (B,135,103) Diode HZU7L(A1) L 1201 (A,109,51) Inductor CTF1473
D 712 (B,135,100) Diode HZU7L(C3) L 1202 (B,125,46) Inductor CTF1473
D 731 (A,140,111) Diode UDZS6R8(B) L 1203 (B,122,46) Inductor CTF1473

E
D 741 (B,146,115) Diode DAN202U L 1301 (A,121,39) Inductor CTF1713
D 751 (B,120,143) Diode 1SR154-400 TC501 (A,71,68) Chip Ceramic Trimmer VCM1008
D 752 (B,124,139) Diode 1SR154-400 X 501 (A,82,77) Oscillator 17.734 475 MHz CSS1737
D 753 (A,132,122) Diode 1SR154-400 X 502 (A,72,77) Oscillator 14.318 18 MHz CSS1750
D 754 (A,132,126) Diode 1SR154-400 X 601 (A,145,38) Oscillator 15.0 MHz CSS1696
D 1021 (B,139,76) Diode 1SR154-400 X 1201 (B,132,45) Oscillator 48.000 MHz CSS1756
D 1031 (A,15,89) Diode UDZS5R6(B) X 1202 (B,106,59) Ceramic Resonator 16.934 MHz CSS1603
D 1051 (A,142,29) Diode UDZS5R6(B) S 601 (A,70,5) Switch(RESET) CSG1020
D 1052 (A,159,32) Diode 1SR154-400 S 701 (A,26,5) Switch(DETACH) CSN1039
D 1071 (B,110,21) Diode UDZS9R1(B) VR571 (A,42,88) Semi-fixed 4.7 kohm(B) CCP1446
F
D 1081 (A,135,90) Diode HZU12(B1) VR1101 (A,38,16) Semi-fixed 10 kohm(B) CCP1448
D 1082 (A,135,88) Diode UDZS10(B) >FU283 (A,21,118) Poly Switch 40 A MINISMDC075F/24
D 1101 (A,103,34) Diode RB060L-40 >FU284 (B,11,107) Poly Switch 40 A MINISMDC075F/24
D 1102 (A,100,34) Diode RB060L-40 >FU1031 (B,17,79) Fuse 1 A CEK1280
DVH-P6050UB/XN/CN5
124
1 2 3 4
5 6 7 8
>FU1101 (A,80,8) Fuse 3 A CEK1286 R 284 (A,53,123) RS1/16S821J
>FU1102 (A,30,30) Fuse 3.5 A CEK1287 R 285 (A,31,123) RS1/16S821J
>FU1103 (A,21,17) Fuse 3.5 A CEK1287 R 286 (A,46,123) RS1/16S821J
>FU1151 (A,11,43) Fuse 750 mA CEK1279 R 287 (A,38,124) RS1/16S223J A
JH1301 (A,18,59) Terminal CKF-047 R 288 (A,50,124) RS1/16S223J
BZ601 (A,140,10) Buzzer CPV1062 R 289 (A,42,124) RS1/16S223J

FM/AM Tuner Unit CWE2098 R 290 (A,53,126) RS1/16S223J
R 291 (A,31,126) RS1/16S223J
RESISTORS R 292 (A,46,126) RS1/16S223J
R 293 (B,66,118) RS1/16S471J
R 101 (A,26,62) RS1/16S102J
R 102 (A,35,43) RS1/16S0R0J R 294 (B,14,88) RS1/16S102J
R 106 (B,48,48) RS1/16S471J R 295 (B,63,118) RS1/16S471J
R 107 (A,39,59) RS1/16S471J R 296 (B,43,119) RS1/16S472J
R 108 (B,35,47) RS1/16S102J R 297 (B,45,119) RS1/16S472J
R 298 (B,50,119) RS1/16S472J B
R 109 (B,35,48) RS1/16S471J
R 110 (B,40,47) RS1/16S221J R 299 (B,52,119) RS1/16S472J
R 111 (B,41,53) RS1/16S221J R 300 (B,34,119) RS1/16S472J
R 112 (B,43,55) RS1/16S101J R 301 (B,37,119) RS1/16S472J
R 113 (B,45,55) RS1/16S101J R 304 (A,34,124) RS1/16S0R0J
R 311 (B,140,120) RS1/16S0R0J
R 115 (B,52,55) RS1/16S471J
R 131 (B,17,136) RS1/16S150J R 312 (B,143,123) RS1/16S473J
R 132 (B,19,136) RS1/16S470J R 313 (A,139,122) RS1/16S121J
R 133 (B,15,135) RS1/16S101J R 314 (A,151,124) RS1/16S104J
R 134 (B,15,137) RS1/16S101J R 315 (A,150,122) RS1/16S103J
R 317 (B,141,122) RS1/16S621J
R 135 (A,17,121) RS1/16S222J C
R 136 (A,9,120) RS1/16S332J R 318 (A,146,121) RS1/16S0R0J
R 137 (A,11,120) RS1/16S562J R 401 (B,160,109) RS1/16S681J
R 138 (A,11,117) RS1/16S472J R 402 (B,160,120) RS1/16S681J
R 139 (B,17,117) RS1/16S102J R 403 (B,160,122) RS1/16S681J
R 404 (B,160,123) RS1/16S681J
R 151 (B,21,93) RS1/16S750J
R 152 (B,20,91) RS1/16S101J R 405 (B,160,125) RS1/16S681J
R 153 (B,22,91) RS1/16S101J R 406 (B,160,126) RS1/16S681J
R 165 (A,46,72) RS1/16S0R0J R 407 (B,160,128) RS1/16S681J
R 171 (A,62,94) RS1/16S750J R 412 (B,161,86) RS1/16S623J
R 413 (B,157,86) RS1/16S623J
R 172 (A,63,93) RS1/16S101J
R 173 (A,60,93) RS1/16S101J R 501 (A,80,72) RS1/16S681J D
R 201 (B,35,108) RS1/16S102J R 502 (B,80,75) RS1/16S222J
R 202 (B,22,115) RS1/16S102J R 503 (B,80,78) RS1/16S105J
R 203 (B,31,114) RS1/16S181J R 504 (A,78,72) RS1/16S681J
R 505 (B,73,75) RS1/16S222J
R 204 (B,25,115) RS1/16S181J
R 205 (B,33,114) RS1/16S223J R 506 (B,73,77) RS1/16S105J
R 206 (B,23,115) RS1/16S223J R 507 (A,77,64) RS1/16S0R0J
R 207 (A,47,108) RAB4C102J R 508 (A,65,69) RS1/16S103J
R 208 (B,60,111) RS1/16S223J R 509 (A,63,69) RS1/16S0R0J
R 510 (A,62,51) RS1/16S101J
R 209 (B,57,114) RS1/16S223J
R 231 (A,58,124) RS1/16S101J R 516 (A,62,48) RS1/16S221J
E
R 232 (A,60,124) RS1/16S101J R 520 (A,83,70) RS1/16S0R0J
R 233 (A,62,124) RS1/16S0R0J R 522 (A,65,52) RS1/16S202J
R 255 (A,69,94) RS1/16S103J R 523 (A,67,69) RS1/16S102J
R 524 (A,66,66) RS1/16S102J
R 256 (A,71,95) RS1/16S103J
R 257 (B,98,138) RS1/16S473J R 525 (A,85,68) RS1/16S102J
R 258 (A,69,97) RS1/16S221J R 526 (A,78,66) RS1/16S681J
R 259 (B,98,141) RS1/16S104J R 528 (A,61,59) RS1/16S102J
R 260 (A,145,113) RS1/16S102J R 529 (A,62,55) RS1/16S102J
R 530 (A,63,62) RS1/16S102J
R 261 (A,69,107) RS1/16S101J
R 262 (B,66,117) RS1/16S473J R 552 (A,58,50) RS1/16S3902D
R 281 (A,38,123) RS1/16S821J R 553 (A,58,46) RS1/16S3302D F
R 282 (A,50,123) RS1/16S821J R 554 (A,65,46) RS1/16S391J
R 283 (A,42,123) RS1/16S821J R 571 (A,65,54) RS1/16S181J
R 572 (B,36,82) RS1/16S1803D
DVH-P6050UB/XN/CN5
5 6 7 8
125
1 2 3 4
R 573 (B,39,80) RS1/16S6802D R 650 (A,147,74) RS1/16S102J
R 574 (B,36,83) RS1/16S471J
R 575 (B,37,85) RS1/16S102J R 651 (A,145,74) RS1/16S102J
R 577 (A,43,84) RS1/16S152J R 652 (B,159,52) RS1/16S102J
A
R 578 (B,34,83) RS1/16S471J R 653 (A,144,42) RS1/16S0R0J
R 654 (A,166,64) RS1/16S473J
R 591 (B,32,83) RS1/16S101J R 659 (B,150,51) RS1/16S472J
R 592 (B,30,83) RS1/16S101J
R 593 (B,23,79) RS1/16S0R0J R 660 (B,152,35) RS1/16S0R0J
R 594 (B,28,84) RS1/16S3302D R 661 (B,161,39) RS1/16S104J
R 595 (B,27,87) RS1/16S6802D R 662 (A,159,43) RS1/16S0R0J
R 663 (A,143,66) RS1/16S471J
R 596 (B,27,89) RS1/16S473J R 664 (A,156,63) RS1/16S102J
R 597 (B,25,95) RS1/16S330J
R 598 (B,25,96) RS1/16S390J R 665 (A,162,36) RS1/16S102J
R 601 (A,160,50) RS1/16S102J R 666 (B,139,40) RS1/16S221J
B R 602 (B,161,42) RS1/16S104J R 667 (B,139,41) RS1/16S221J
R 668 (B,141,45) RS1/16S221J
R 603 (A,153,42) RS1/16S101J R 669 (B,138,44) RS1/16S221J
R 604 (B,138,47) RS1/16S101J
R 605 (A,155,43) RS1/16S221J R 670 (B,139,43) RS1/16S221J
R 606 (A,153,35) RS1/16S221J R 671 (A,143,34) RS1/16S0R0J
R 607 (A,156,43) RS1/16S101J R 672 (A,127,55) RS1/16S102J
R 673 (A,127,53) RS1/16S102J
R 608 (A,157,46) RS1/16S101J R 674 (B,154,48) RS1/16S104J
R 609 (A,167,48) RS1/16S473J
R 610 (A,157,50) RS1/16S102J R 675 (B,143,52) RS1/16S223J
R 611 (B,149,53) RS1/16S104J R 676 (B,134,53) RS1/16S104J
R 612 (B,142,57) RS1/16S104J R 677 (B,140,37) RS1/16S473J
C R 678 (B,146,46) RS1/16S104J
R 613 (B,152,42) RS1/16S104J R 679 (B,142,45) RS1/16S682J
R 614 (B,149,35) RS1/16S104J
R 616 (B,158,33) RS1/16S473J R 680 (B,136,46) RS1/16S682J
R 617 (B,159,46) RS1/16S104J R 681 (B,142,56) RS1/16S104J
R 618 (B,147,51) RS1/16S104J R 682 (B,136,52) RS1/16S104J
R 683 (B,146,44) RS1/16S104J
R 619 (B,148,51) RS1/16S104J R 685 (B,136,57) RS1/16S183J
R 620 (A,159,46) RS1/16S102J
R 621 (B,156,63) RS1/16S473J R 686 (B,155,56) RS1/16S102J
R 623 (A,151,75) RS1/16S102J R 687 (B,145,61) RS1/16S104J
R 624 (B,159,48) RS1/16S102J R 701 (B,126,20) RS1/16S102J
R 702 (B,128,16) RS1/16S102J
D R 625 (B,156,43) RS1/16S102J R 703 (B,124,20) RS1/16S102J
R 626 (A,148,27) RS1/16S102J
R 627 (B,146,51) RS1/16S473J R 704 (B,128,15) RS1/16S102J
R 628 (A,145,68) RS1/16S681J R 705 (B,123,20) RS1/16S102J
R 629 (B,138,46) RS1/16S102J R 706 (B,122,20) RS1/16S102J
R 707 (B,120,20) RS1/16S102J
R 630 (A,139,37) RS1/16S101J R 708 (B,96,15) RS1/16S103J
R 631 (B,141,54) RS1/16S473J
R 632 (A,136,32) RS1/16S101J R 709 (B,99,15) RS1/16S473J
R 633 (A,139,42) RS1/16S104J R 710 (B,97,18) RS1/4SA391J
R 634 (A,139,34) RS1/16S104J R 711 (B,141,103) RS1/16S103J
R 712 (B,141,100) RS1/16S104J
R 635 (B,163,40) RS1/16S473J R 713 (B,138,105) RS1/16S473J
E
R 636 (B,138,49) RS1/16S0R0J
R 637 (B,137,49) RS1/16S0R0J R 714 (B,141,101) RS1/16S473J
R 638 (B,150,55) RS1/16S104J R 716 (B,135,105) RS1/16S472J
R 639 (A,142,68) RS1/16S102J R 731 (B,147,110) RS1/16S473J
R 732 (A,144,112) RS1/16S103J
R 640 (A,142,65) RS1/16S102J R 733 (A,143,110) RS1/16S103J
R 642 (A,137,36) RS1/16S0R0J
R 643 (A,136,39) RS1/16S0R0J R 734 (A,140,112) RS1/16S103J
R 644 (A,148,12) RS1/16S102J R 742 (B,149,112) RS1/16S472J
R 645 (A,151,41) RS1/16S0R0J R 743 (B,149,115) RS1/16S472J
R 744 (B,143,115) RS1/16S153J
R 646 (A,163,37) RS1/16S183J R 1001 (B,16,67) RS1/16S473J
F
R 647 (B,141,52) (CN5) RS1/16S823J
(RD,RI) RS1/16S473J R 1002 (B,18,67) RS1/16S102J
R 648 (B,142,52) (CN5) RS1/16S243J R 1031 (A,14,87) RS1/16S392J
(RC,RI) RS1/16S473J R 1051 (A,142,25) RS1/16S223J
R 649 (A,134,65) RS1/16S471J R 1052 (B,151,31) RS1/4SA821J
DVH-P6050UB/XN/CN5
126
1 2 3 4
5 6 7 8
R 1053 (B,153,31) RS1/4SA390J R 1211 (A,126,72) RS1/16S0R0J
R 1061 (B,133,21) RS1/16S222J R 1213 (A,121,55) RS1/16S473J

R 1062 (B,140,21) RS1/16S103J R 1214 (B,124,43) RS1/16S221J A
R 1063 (A,137,19) RS1/16S223J R 1215 (A,119,52) RS1/16S103J
R 1071 (A,114,20) RS1/16S102J R 1216 (A,117,55) RS1/16S473J
R 1072 (A,114,23) RS1/16S1R0J R 1217 (A,119,58) RS1/16S101J
R 1073 (A,107,27) RS1/16S331J R 1218 (A,122,58) RS1/16S101J

R 1074 (A,104,27) RS1/16S331J R 1219 (B,112,46) RS1/16S473J
R 1081 (A,130,92) RS1/4SA471J R 1220 (B,112,47) RS1/16S473J
R 1082 (A,135,99) RS1/16S1R0J R 1222 (A,110,56) RS1/16S473J
R 1101 (A,76,25) RS1/16S471J R 1223 (B,107,66) RS1/16S0R0J
R 1102 (A,42,18) RS1/16S9101D R 1224 (A,113,79) RS1/16S821J

R 1103 (A,43,18) RS1/16S6802D R 1225 (A,114,79) RS1/16S821J
R 1104 (A,39,28) RS1/16S1502D R 1226 (B,106,63) RS1/16S0R0J B
R 1105 (A,38,28) RS1/16S6801D R 1227 (B,104,62) RS1/16S0R0J
R 1106 (B,41,27) RS1/16S0R0J R 1228 (A,113,59) RS1/16S0R0J
R 1107 (B,38,19) RS1/16S6800D R 1230 (A,119,54) RS1/16S104J

R 1108 (B,38,32) RS1/16S3602D R 1232 (B,124,41) RS1/16S103J
R 1109 (B,41,19) RS1/16S2202D R 1301 (A,121,35) RS1/16S153J
R 1110 (B,41,32) RS1/16S5601D R 1302 (A,122,40) RS1/16S153J
R 1111 (B,41,17) RS1/16S4701D R 1403 (A,119,50) RS1/16S0R0J
R 1112 (B,41,30) RS1/16S4701D R 1405 (A,116,59) RS1/16S272J

R 1113 (B,41,20) RS1/16S3901D R 1406 (A,124,58) RS1/16S103J
R 1114 (B,41,29) RS1/16S3901D R 1407 (A,117,57) RS1/16S103J
R 1115 (B,46,19) RS1/16S1203D R 1412 (A,115,57) RS1/16S101J C
R 1116 (B,46,30) RS1/16S2203D R 1415 (B,117,73) RS1/16S104J
R 1117 (B,43,18) RS1/16S1002D R 1416 (B,117,75) RS1/16S104J

R 1118 (B,43,31) RS1/16S1002D
R 1119 (B,49,19) RS1/16S3302D CAPACITORS
R 1120 (B,49,30) RS1/16S3302D
R 1121 (A,50,17) RS1/16S221J C 101 (A,46,43) CKSRYB104K16
C 102 (B,25,62) CCSRCH152J50
R 1122 (A,50,30) RS1/16S221J C 103 (B,29,65) CCSRCH152J50
R 1125 (A,58,8) RS1/16S272J C 107 (A,36,59) CKSYB225K16
R 1126 (A,54,33) RS1/16S0R0J
R 1127 (A,55,7) RS1/16S0R0J C 111 (B,32,54) CKSRYB105K10 D
C 131 (B,20,136) CKSRYB104K16
R 1132 (A,74,25) RS1/16S0R0J C 134 (B,12,136) CKSRYB102K50
R 1141 (B,117,24) RS1/16S270J C 135 (B,11,136) CKSRYB102K50
R 1151 (A,11,33) RS1/16S103J
R 1152 (A,14,27) RS1/16S103J C 153 (B,20,88) CKSRYB105K10
C 154 (B,22,88) CKSRYB105K10
R 1154 (A,11,31) RAB4C680J C 162 (A,44,65) CKSQYB225K10
R 1156 (B,18,51) RS1/4SA220J C 171 (A,63,91) CKSRYB105K10
R 1157 (B,21,51) RS1/4SA220J
R 1158 (B,23,51) RS1/4SA220J C 172 (A,60,91) CKSRYB105K10
E
C 173 (A,62,85) CKSRYB104K16
R 1159 (B,23,55) RS1/16S103J C 191 (B,43,75) CKSQYB225K10
R 1161 (B,27,44) RS1/16S3002D C 194 (A,49,67) CKSRYB104K16
R 1162 (B,27,41) RS1/16S5601D
R 1163 (B,17,45) RS1/16S102J C 195 (A,50,63) CEVW100M16
C 201 (A,37,94) CEVW470M16
R 1201 (A,130,69) RS1/16S0R0J C 202 (A,46,102) CKSRYB104K16
R 1202 (B,128,46) RS1/16S151J C 203 (A,45,94) CEVW100M16
R 1204 (A,123,37) RS1/16S330J
R 1206 (A,128,59) RS1/16S104J C 205 (A,29,101) CEVW470M16
C 206 (A,35,109) CEVW100M16 F
R 1207 (A,127,59) RS1/16S104J C 207 (B,48,95) CKSQYB225K10
R 1208 (A,124,56) RS1/16S104J C 208 (A,50,107) CKSQYB225K10
R 1210 (A,124,53) RS1/16S473J
DVH-P6050UB/XN/CN5
5 6 7 8
127
1 2 3 4
C 210 (B,51,112) CKSQYB225K10 C 420 (B,138,85) CKSQYB225K10

C 211 (B,52,96) CKSRYB224K16 C 501 (A,77,80) CKSRYB104K16
C 212 (B,53,111) CKSRYB224K16 C 502 (B,81,75) CCSRCH7R0D50
A
C 213 (A,53,98) CKSQYB225K10 C 503 (B,81,78) CCSRCH7R0D50
C 214 (B,46,116) CKSQYB225K10 C 504 (B,76,73) CKSRYB104K16
C 215 (A,55,98) CKSQYB225K10 C 505 (B,72,75) CCSRCH9R0D50

C 216 (B,51,116) CKSQYB225K10 C 506 (B,72,77) CCSRCH9R0D50
C 217 (A,59,101) CKSQYB225K10 C 508 (A,70,65) CCSRCH100D50
C 218 (A,60,107) CKSQYB225K10 C 509 (A,65,57) CKSRYB105K6R3
C 219 (A,61,101) CKSQYB475K10 C 510 (A,65,55) CKSRYB105K6R3
C 231 (A,56,127) CKSRYB473K50 C 511 (B,63,50) CCSRCH560J50

C 251 (B,85,118) CKSRYB105K10 C 512 (A,65,49) CKSRYB105K6R3
C 252 (B,82,118) CKSRYB105K10 C 513 (A,65,48) CKSRYB122K50
B C 253 (B,88,117) CKSRYB105K10 C 514 (A,65,59) CKSRYB105K6R3
C 254 (B,89,117) CKSRYB105K10 C 515 (A,67,45) CKSRYB105K6R3
C 255 (B,85,121) CKSQYB105K10 C 516 (A,82,67) CKSRYB103K50

C 257 (B,87,121) CKSQYB105K10 C 518 (A,66,69) CCSRCH101J50
C 259 (A,70,102) CEVW330M10 C 523 (B,65,54) CKSRYB105K6R3
C 260 (A,78,114) 3 300 uF/16 V CCH1384(P30) C 524 (A,78,69) CCSRCH220J50

C 261 (A,74,124) CKSRYB104K16 C 526 (A,83,71) CCSRCH120J50
C 263 (B,94,115) CKSYB475K16 C 551 (A,60,74) CEVW470M16
C 264 (B,94,117) CKSYB475K16 C 552 (A,55,48) CEVW100M16
C C 265 (B,79,120) 10 uF CCG1182 C 553 (A,55,58) CKSRYB223K16
C 281 (A,36,118) CEVW100M16 C 554 (A,56,63) CEVW101M16

C 282 (A,51,118) CEVW100M16 C 571 (A,61,54) CKSQYB106K6R3
C 283 (A,41,118) CEVW100M16 C 572 (A,47,88) CEVW100M16
C 284 (A,56,118) CEVW100M16 C 573 (B,36,80) CKSRYB102K50
C 285 (A,31,118) CEVW100M16 C 575 (B,37,86) CCSRCH101J50
C 286 (A,46,118) CEVW100M16 C 591 (B,32,79) CKSYB106K6R3

C 288 (A,64,118) CEVW101M16 C 592 (B,30,79) CKSYB106K6R3
C 289 (A,38,126) CKSRYB102K50 C 593 (B,28,83) CKSRYB104K16
C 290 (A,50,126) CKSRYB102K50 C 594 (A,36,87) CEVQW470M6R3
C 291 (A,42,126) CKSRYB102K50 C 595 (A,28,94) CEVW220M6R3
D
C 292 (A,53,124) CKSRYB102K50 C 596 (A,28,86) CEVW331M6R3
C 294 (A,46,124) CKSRYB102K50 C 598 (A,25,76) CEVW330M10
C 295 (B,28,122) CKSRYB103K50 C 601 (A,148,38) CCSRCH100D50
C 296 (B,18,105) CKSRYB471K50 C 602 (A,142,37) CCSRCH100D50
C 299 (B,22,136) CKSRYB104K16 C 603 (A,140,40) CCSRCH101J50

C 311 (B,148,121) 10 uF CCG1171 C 604 (A,168,41) CKSRYB105K6R3
C 313 (B,140,122) CCSRCH150J50 C 609 (A,136,43) CCSRCH221J50
C 401 (A,161,106) CKSRYB102K50 C 614 (A,162,41) CKSRYB105K6R3
E
C 402 (B,160,101) CKSYB475K10 C 617 (B,150,56) CKSRYB104K16
C 404 (A,161,103) CKSRYB103K50 C 618 (B,147,55) CKSRYB105K6R3
C 405 (A,156,107) CEVW470M6R3 C 702 (A,93,8) CKSRYB104K16
C 406 (A,156,101) CEVW470M6R3 C 703 (A,93,7) CKSRYB102K50
C 409 (A,156,121) CEVW101M16 C 731 (A,142,112) CKSRYB104K16

C 411 (B,156,128) CCSRCH330J50 C 741 (B,139,115) CKSRYB104K16
C 412 (B,151,87) CKSRYB474K10 C 1001 (A,17,67) CEVW101M10
C 413 (B,154,86) CKSRYB474K10 C 1002 (B,14,68) CKSRYB103K50
C 414 (B,154,85) CKSRYB474K10 C 1003 (A,17,76) CEVW101M16
F
C 415 (B,151,85) CKSRYB474K10 C 1021 (B,152,77) CKSQYB225K10
C 416 (B,158,86) CKSRYB102K50 C 1023 (B,149,75) CKSYB475K10
C 417 (B,160,86) CKSRYB102K50 C 1031 (B,17,83) CKSRYB103K50
C 418 (B,133,86) CKSRYB104K16 C 1032 (A,17,84) CEVW470M6R3
C 419 (B,135,86) CKSYB106K10 C 1033 (A,14,90) CKSRYB103K50
DVH-P6050UB/XN/CN5
128
1 2 3 4
5 6 7 8
C 1041 (A,12,55) CKSRYB105K6R3 C 1226 (B,123,38) CCSRCH101J50

C 1042 (A,12,58) CKSRYB105K6R3 C 1301 (A,124,50) CKSRYB104K16
C 1051 (A,139,26) CKSRYB103K50 C 1302 (A,121,45) CKSRYB104K16 A
C 1052 (A,134,27) CEVW101M10 C 1304 (A,127,54) CKSRYB103K50
C 1053 (A,142,27) CKSRYB103K50 C 1402 (A,126,69) CKSRYB104K16
C 1054 (A,159,24) CEAT102M16(P45) C 1405 (B,123,74) CKSRYB104K16

C 1062 (B,131,21) CKSRYB102K50
C
C
C
1071
1073
1081
(A,119,22)
(B,112,21)
(A,139,98)
CEVW1R0M50
CKSRYB104K16
CKSRYB103K50
B
Unit Number :
C 1082 (A,139,95) CEVW100M16
C 1083 (A,135,92) CKSRYB103K50
C 1101 (A,86,19) 3 300 uF/16 V CCH1384(P30) MISCELLANEOUS
C 1102 (A,65,27) CEHAZL471M16(P35) B
C 1103 (A,40,19) CCSRCH101J50 IC 2101 (B,93,21) IC PD6569A
IC 2102 (A,62,8) Remote IC GP1UX51RK
C 1104 (A,38,26) CKSQYB475K10 Q 2103 (B,138,10) Chip Transistor DTC114EUA
C 1105 (B,38,17) CKSRYB103K50 D 2101 (B,137,35) Diode MALS068X
C 1106 (B,38,30) CKSRYB102K50 D 2102 (B,137,37) Diode MALS068X
C 1107 (B,46,17) CKSRYB222K50
C 1108 (B,46,32) CKSRYB222K50 D 2105 (A,104,8) LED CL-197HB1-D(CDE)
D 2106 (A,157,24) White LED NESW505C-5273
C 1112 (A,53,28) CKSRYB104K16 D 2109 (A,51,36) LED CL-197HB1-D(CDE)
C 1113 (A,54,26) CKSYB475K16
C 1114 (A,54,38) CKSYB225K16 D 2110 (A,16,36) LED CL-197HB1-D(CDE) C
D 2111 (A,127,8) LED CL-197HB1-D(CDE)
C 1115 (A,54,11) CKSYB225K16 D 2112 (A,148,8) LED CL-197HB1-D(CDE)
C 1116 (A,21,35) 120 uF/10 V CCH1706 D 2113 (A,116,8) LED CL-197HB1-D(CDE)
C 1117 (A,20,27) 470 uF/6.3 V CCH1437 D 2114 (A,51,12) LED CL-197HB1-D(CDE)
C 1119 (A,20,21) 470 uF/6.3 V CCH1437
C 1120 (B,14,50) CKSQYB225K10 D 2115 (A,63,24) White LED NESW505C-5273
X 2101 (B,103,11) Ceramic Resonator 5.00 MHz CSS1547
C 1121 (A,54,22) CKSRYB104K16 S 2101 (A,19,40) Push Switch CSG1155
C 1141 (B,93,26) CKSQYB225K10 S 2102 (A,19,9) Push Switch CSG1155
C 1142 (B,102,23) CKSRYB105K6R3 S 2103 (A,6,8) Push Switch CSG1155
C 1144 (A,114,30) CEVW101M16
C 1151 (A,13,50) CEVW101M6R3 S 2104 (A,48,40) Push Switch CSG1155
S 2105 (A,48,9) Push Switch CSG1155 D
C 1161 (B,23,48) CKSRYB103K50 S 2106 (A,102,5) Push Switch CSG1155
C 1162 (A,22,50) CEVW470M16 S 2107 (A,114,5) Push Switch CSG1155
C 1163 (B,20,46) CKSRYB105K10 S 2108 (A,126,5) Push Switch CSG1155
C 1201 (B,131,48) CCSRCK1R0C50
C 1202 (A,130,57) CKSRYB104K16 S 2109 (A,148,5) Push Switch CSG1155
S 2110 (A,34,25) Switch(MULTI-CONTROL) CSX1120
C 1203 (A,130,66) CKSRYB104K16 LCD2101 (A,69,35) LCD CAW1955
C 1204 (A,130,61) CKSRYB104K16
C 1205 (B,129,44) CCSRCK1R0C50 RESISTORS
C 1206 (B,127,48) CKSRYB105K6R3
C 1207 (B,130,39) CKSRYB104K16 R 2102 (B,99,10) RS1/16S0R0J
R 2103 (B,24,32) RS1/16S473J
E
C 1209 (B,124,48) CKSRYB104K16 R 2104 (B,26,34) RS1/16S153J
C 1210 (A,124,71) CKSRYB104K16 R 2105 (B,70,5) RS1/16S101J
C 1211 (B,124,42) CKSRYB103K50 R 2106 (B,64,10) RS1/16S2R2J
C 1212 (A,111,58) CKSRYB474K10
C 1213 (A,112,53) CKSQYB475K10 R 2107 (B,64,22) RS1/16S682J
R 2108 (B,44,16) RS1/16S103J
C 1216 (A,114,66) CKSRYB105K6R3 R 2113 (B,122,13) RS1/16S681J
C 1217 (B,107,63) CKSRYB105K6R3
R 2115 (B,148,23) RS1/16S102J
C 1220 (B,106,69) CKSRYB104K16 R 2116 (B,150,23) RS1/16S102J F
C 1221 (A,110,65) CEVW220M6R3 R 2120 (B,136,17) RS1/16S223J
C 1223 (A,113,83) CKSRYB182K50
DVH-P6050UB/XN/CN5
5 6 7 8
129
1 2 3 4
R 2123 (B,142,11) RS1/16S102J L 1504 (A,35,10) Inductor CTF1387
R 2124 (B,30,9) RS1/16S471J
R 2125 (B,149,20) RS1/16S121J L 1511 (A,63,3) Inductor CTF1680
R 2137 (B,143,17) RS1/16S0R0J L 1601 (A,41,23) Inductor CTF1473
A
L 1602 (A,55,42) Inductor CTF1473
CAPACITORS L 1603 (A,54,42) Inductor CTF1473
L 1604 (A,52,42) Inductor CTF1473
C 2101 (B,107,16) CKSRYB103K50
C 2102 (B,108,15) CKSRYB103K50 L 1605 (A,38,32) Inductor CTF1395
C 2117 (B,64,8) CKSQYB106K6R3 L 1672 (A,41,20) Inductor CTF1473
L 1801 (A,70,61) Inductor CTF1473
C
Unit Number : CWN3429
L 1901
L 1902
(A,91,73)
(A,91,62)
Inductor
Inductor
CTF1487
CTF1558
B X 1501 (A,40,15) Crystal 27.000 MHz CSS1714
Unit Name : Panel Unit VR1671 (A,35,20) Semi-fixed 10 kohm(B) CCP1448
EF1501 (A,68,46) EMI Filter DTL1106
MISCELLANEOUS
EF1502 (A,61,44) EMI Filter DTL1106
D 1970 (A,5,19) LED CL220PGC EF1901 (A,87,74) EMI Filter DTF1106
S 1970 (A,79,37) Push Switch(EJECT) CSG1174 EF1903 (A,91,64) EMI Filter DTL1106
RESISTORS RESISTORS
R 1970 (B,62,11) RS1/16S101J R 1011 (B,72,40) RS1/16SS104J

R 1971 (B,66,11) RS1/16S101J R 1014 (B,82,61) RS1/16SS473J
R 1015 (B,76,60) RS1/16SS101J
D
C R 1101 (B,63,52) RS1/16SS391J
R 1102 (B,62,47) RS1/16SS511J
Unit Number : YWX5005
R 1103 (B,67,53) RS1/16SS391J
Unit Name : DVD Core Unit R 1104 (B,69,47) RS1/16SS561J
R 1107 (B,61,53) RS1/16SS6R8J
MISCELLANEOUS R 1108 (B,65,53) RS1/16SS6R8J
R 1109 (B,57,40) RS1/10S1R5J
IC 1003 (B,72,42) IC S-80859CNNB-B9K
IC 1004 (B,75,48) Regulator IC NJM2880U1-05 R 1110 (B,63,40) RS1/10S1R5J
IC 1005 (B,61,58) IC S-L2980A50MC-C7J R 1111 (B,70,40) RS1/10S1R5J
IC 1007 (B,82,54) IC NJM2885DL1-33 R 1112 (B,64,40) RS1/10S1R5J
IC 1008 (B,80,63) IC R1232D121B R 1113 (B,61,40) RS1/10S1R5J
D R 1114 (B,59,40) RS1/10S1R5J
IC 1201 (A,26,15) IC BD7996EFV
IC 1301 (B,90,27) IC TC7SZ125FU R 1115 (B,66,40) RS1/10S1R5J
IC 1351 (B,86,27) IC TC7SZ08FU R 1116 (B,68,40) RS1/10S1R5J
IC 1352 (B,79,13) IC TC74LCX16373FT R 1117 (B,64,49) RS1/16SS104J
IC 1401 (B,61,32) Flash ROM Unit CWW1465 R 1118 (B,70,49) RS1/16SS104J
R 1202 (A,19,12) RS1/16SS221J
*IC1402 (B,37,10) Flash ROM Unit CWW1466
IC 1403 (B,47,29) IC TC7SZ32FU R 1203 (A,19,11) RS1/16SS221J
IC 1481 (B,60,12) IC EDS1232AATA-75-E R 1210 (A,30,27) RS1/16SS101J
IC 1501 (A,60,19) IC MN2DS0016AAUB R 1211 (B,26,18) RS1/16SS3R9J
IC 1801 (A,70,52) D/A Converter PCM1753DBQ R 1212 (B,27,18) RS1/16SS3R9J
R 1214 (B,28,18) RS1/16SS3R9J
E
Q 1101 (B,62,50) Transistor 2SC4081
Q 1102 (B,68,50) Transistor 2SC4081 R 1215 (B,29,18) RS1/16SS3R9J
Q 1103 (B,60,45) Transistor 2SB1260 R 1216 (B,30,18) RS1/16SS3R9J
Q 1104 (B,66,45) Transistor 2SB1260 R 1217 (B,31,18) RS1/16SS3R9J
D 1002 (A,88,66) Diode 1SR154-400 R 1219 (A,20,27) RS1/16SS101J
R 1223 (A,19,4) RS1/16SS753J
D 1301 (B,12,10) Chip LED CL205IRXTU
L 1004 (B,63,60) Inductor CTF1472 R 1225 (A,19,7) RS1/16SS753J
L 1005 (B,81,49) Inductor CTF1465 R 1227 (B,13,21) RS1/16SS3R9J
R 1230 (B,16,21) RS1/16SS3R9J
F L 1101 (B,66,54) Inductor CTF1305
L 1502 (A,71,46) Inductor CTF1378 R 1232 (B,18,21) RS1/16SS3R9J
L 1503 (A,60,47) Inductor CTF1487 R 1233 (B,19,21) RS1/16SS3R9J
DVH-P6050UB/XN/CN5
130
1 2 3 4
5 6 7 8
R 1234 (B,20,21) RS1/16SS3R9J R 1545 (A,61,36) RS1/16SS223J
R 1241 (B,33,18) RS1/16SS3R9J R 1547 (A,59,41) RS1/16SS473J A

R 1301 (B,13,13) RS1/16SS391J R 1557 (A,57,39) RS1/16SS104J

R 1302 (B,15,13) RS1/16SS471J R 1559 (A,63,41) RS1/16SS221J
R 1304 (B,87,23) RS1/16SS563J R 1560 (A,68,42) RAB4CQ104J
R 1305 (B,86,23) RS1/16SS243J R 1562 (A,64,38) RAB4CQ104J
R 1306 (B,85,23) RS1/16SS683J R 1565 (A,73,36) RS1/16SS103J
R 1307 (B,88,23) RS1/16SS243J R 1566 (A,72,36) RS1/16SS103J

R 1314 (B,86,21) RAB4CQ822J R 1567 (B,68,22) RAB4CQ560J B
R 1351 (B,84,25) RS1/16SS331J R 1568 (B,65,22) RAB4CQ560J

R 1406 (B,25,4) RS1/16SS104J R 1573 (B,63,19) RS1/16SS560J
R 1407 (B,25,6) RS1/16SS104J R 1582 (A,81,25) RS1/16SS103J
R 1410 (B,47,31) RS1/16SS104J R 1583 (A,81,27) RS1/16SS103J
R 1501 (B,71,3) RAB4CQ560J R 1584 (A,77,28) RS1/16SS103J
R 1502 (A,85,3) RS1/16SS104J R 1601 (A,41,25) RS1/16SS123J

R 1503 (A,71,2) RS1/16SS560J R 1602 (A,39,24) RS1/16SS123J
R 1504 (A,87,23) RAB4CQ104J R 1607 (A,41,27) RS1/16SS105J C
R 1505 (B,68,3) RAB4CQ560J R 1609 (A,37,28) RN1/16SE1002D
R 1506 (A,87,19) RAB4CQ104J R 1610 (A,43,28) RS1/16SS222J

R 1510 (A,78,11) RAB4CQ104J R 1616 (A,53,36) RS1/16SS2002D
R 1511 (A,88,4) RS1/16SS104J R 1672 (A,43,21) RS1/16SS303J

R 1513 (A,44,4) RS1/16SS102J R 1674 (A,34,23) RS1/16SS562J
R 1515 (A,43,3) RS1/16SS102J R 1706 (A,52,56) RS1/16SS201J D
R 1516 (A,76,8) RS1/16SS103J R 1707 (A,55,51) RS1/16SS101J
R 1518 (A,85,5) RS1/16SS104J R 1708 (A,52,50) RS1/16SS201J

R 1520 (A,35,8) RS1/16SS221J R 1715 (A,60,56) RS1/16SS201J
R 1523 (A,39,11) RS1/16SS101J R 1720 (A,62,51) RS1/16SS101J
R 1524 (A,39,12) RS1/16SS101J R 1803 (A,72,56) RS1/16SS821J

R 1526 (A,36,10) RS1/16SS270J R 1805 (A,72,61) RS1/16SS104J
R 1528 (A,43,14) RS1/16SS101J R 1806 (A,74,61) RS1/16SS104J
E
R 1529 (B,53,22) RAB4CQ560J R 1903 (A,89,52) RS1/16SS0R0J
R 1530 (A,43,15) RS1/16SS105J R 1904 (A,90,59) RS1/16S0R0J

R 1531 (B,50,22) RAB4CQ560J
R 1532 (A,77,22) RS1/16SS103J CAPACITORS
R 1533 (A,76,27) RS1/16SS103J
R 1534 (A,77,26) RS1/16SS103J C 1019 (B,58,59) CCSSCH101J50
C 1020 (B,58,57) CKSSYB104K10
R 1535 (A,63,36) RS1/16SS221J C 1021 (B,60,60) CKSRYB105K10
R 1537 (A,67,40) RS1/16SS221J C 1022 (B,79,47) CKSSYB103K16
R 1540 (A,70,43) RS1/16SS102J
R 1541 (A,64,41) RS1/16SS472J C 1024 (B,71,48) CKSQYB475K10 F
C 1025 (B,64,58) CKSRYB105K10
R 1543 (A,59,37) RS1/16SS332J C 1027 (A,90,53) CCSSCH101J50
R 1544 (A,57,41) RS1/16SS183J
DVH-P6050UB/XN/CN5
5 6 7 8
131
1 2 3 4
C 1028 (B,89,56) CKSRYB105K10 C 1502 (A,58,43) CKSQYB106K6R3
C 1029 (B,89,52) CKSQYB225K10 C 1503 (A,55,3) CKSSYB104K10

C 1030 (B,84,59) CKSQYB106K6R3 C 1504 (A,58,3) CKSSYB104K10
A
C 1032 (B,82,59) CKSRYB105K10 C 1506 (A,60,3) CKSSYB104K10

C 1035 (B,45,27) CCSSCH101J50 C 1509 (A,69,2) CKSSYB104K10
C 1101 (B,61,54) 10 µF CCG1192 C 1510 (A,43,11) CKSSYB104K10
C 1104 (B,63,43) CKSSYB104K10 C 1513 (A,43,10) CKSSYB104K10

B C 1106 (B,63,45) CKSSYB103K16 C 1515 (A,43,16) CKSSYB104K10
C 1108 (A,35,36) CKSSYB103K16 C 1517 (A,43,17) CKSSYB104K10
C 1109 (A,36,33) CKSRYB105K10 C 1518 (A,37,14) CCSSCH8R0D50

C 1110 (A,35,37) CKSSYB103K16 C 1519 (A,37,16) CCSSCH8R0D50
C 1111 (A,39,33) CKSRYB105K10 C 1521 (A,76,24) CKSSYB104K10
C 1201 (B,21,11) CEVW101M16 C 1522 (A,77,24) CKSSYB104K10
C 1202 (B,15,17) CKSYB475K16 C 1523 (A,58,36) CKSSYB104K10
C 1207 (B,16,10) CKSQYB225K10 C 1524 (A,57,37) CKSSYB103K16

C C 1211 (A,19,16) CKSSYB103K16 C 1527 (A,63,35) CKSSYB471K50

C 1301 (B,90,25) CKSSYB104K10 C 1530 (A,59,39) CKSSYB224K6R3

C 1356 (B,83,28) CKSYB106K6R3 C 1560 (A,51,3) CKSSYB104K10
D C 1401 (B,72,31) CKSSYB103K16 C 1577 (A,77,30) CKSSYB104K10
C 1402 (B,49,33) CKSSYB104K10 C 1601 (A,41,24) CCSSCH101J50

C 1403 (B,81,27) CKSQYB475K6R3 C 1602 (A,43,24) CCSSCH101J50

E

C 1486 (B,53,5) CKSSYB104K10 C 1615 (A,41,30) CKSRYB105K10

F
C 1499 (B,49,4) CKSSYB102K50 C 1626 (A,41,31) CKSRYB105K10
C 1501 (A,68,44) CKSQYB106K6R3 C 1627 (A,43,23) CKSSYB104K10
DVH-P6050UB/XN/CN5
132
1 2 3 4
5 6 7 8
Circuit Symbol and No. Part No.
C 1628 (A,54,36) CKSSYB104K10
C 1629 (A,49,36) CKSSYB104K10

C 1630 (A,38,30) CKSQYB106K6R3 A
C 1671 (A,43,18) CKSSYB104K10
C 1672 (A,43,19) CKSSYB104K10
C 1673 (A,37,21) CKSSYB104K10
C 1674 (A,39,21) CKSSYB104K10

C 1675 (A,39,19) CKSRYB105K10
C 1676 (A,37,19) CKSRYB105K10
C 1677 (A,43,22) CKSSYB104K10
C 1801 (A,74,52) CKSSYB104K10
C 1802 (A,67,58) 10 µF CCG1192

C 1803 (A,67,56) CKSSYB104K10
C 1804 (A,69,58) 10 µF CCG1192 B
C 1805 (A,69,56) CKSSYB104K10
C 1808 (A,72,57) CCSRCH182J50
C 1809 (A,75,57) CCSRCH182J50

C 1810 (A,72,59) CKSQYB475K6R3
C 1811 (A,74,59) CKSQYB475K6R3
C 1901 (A,84,74) CKSSYB102K50
E
Unit Name : Compound Unit(A) C
Q 1299 Photo-taransistor CPT231SCTD

S 1201 Spring Switch(12cm) CSN1069
S 1203 Spring Switch(DISC SENS) CSN1069
S 1204 Spring Switch(DISC SENS) CSN1070

R 1298 RS1/16S0R0J
R 1299 RS1/16S0R0J
F
D
Unit Name : Compound Unit(B)

S 1206 Switch(CLAMP) CSN1067
Miscellaneous Parts List

Pickup Unit(Service) CXX2118
M 1 Motor Unit(LOADING) CXC4912
M 2 Motor(STEPPING) CXM1364
M 3 Motor(SPINDLE) CXM1362 E
> Fuse(10 A) (Cord Assy : CDP1020) CEK1136
Resistor (Cord Assy : CDP1020) RS1/2PMF102J

Resistor (Cord Assy : CDE7321) RSV2PMF102J
DVH-P6050UB/XN/CN5
5 6 7 8
133

Pioneer Dvh-P6050ub crt4141 Car DVD Receiver

Uploaded by

Copyright:

Available Formats

Pioneer Dvh-P6050ub crt4141 Car DVD Receiver

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pioneer Dvh-P6050ub crt4141 Car DVD Receiver

Uploaded by

Copyright:

Available Formats

ORDER NO.

Manufactured under license from Dolby Laboratories.

DTS and DTS Digital Out are registered trademarks

For details, refer to "Important Check Points for Good Servicing".

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

Where in a manufacturer’s service documentation, for example in circuit diagrams or lists

1. Safety Precautions for those who Service this Unit.

Laser diode characteristics

Additional Laser Caution

[Important Check Points for Good Servicing]

1 Use specified parts for repair.

Use genuine parts. Be sure to use important parts for safety.

2 Do not perform modifications without proper instructions.

4 Make sure the screws are tightly fastened.

5 Make sure each connectors are correctly inserted.

9 There should be no spark traces or similar marks on the power plug.

3. Lubricants, Glues, and Replacement parts

5. Shipping mode and Shipping screws

- DVD section precaution

The following lead-free solders are available as service parts:

General Gain ................................. +6 dB to – 24 dB

AAC decoding format...........MPEG-4 AAC (iTunes ®

Infrared remote control

2.2 DISC/CONTENT FORMAT

is a trademark of DVD Format/Logo Licensing Corporation.

2.3 PANEL FACILITIES

7 RDM/ /iPod button

Press to cycle through all the available sources.

Press to quickly lower the volume level by about 90%.

3 VOLUME buttons Press to increase or decrease the volume.

11 A.MENU button Press to select various sound quality controls.

12 FUNCTION Press to select functions.

Press to select among three FM bands Press to switch between

FORWARD( ) button Press to perform fast forward.

PREVIOUS ( ) button Press to return to the previous track (chapter). D

STOP( ) button Not used. Press to stop playback.

Functions are the same as MULTI-CON-

Using the remote control operation

6 (Dolby Digital) indicator h (song) indicator

nected to this unit.) played on the main display section.

2.4 CONNECTION DIAGRAM

Power cable connection

AUX jack (3.5 ø) 20 cm 1.5 m

• Change the initial setting of this unit (refer to the

Black (chassis ground)

Left White/black Gray/black Right

Power amp (sold

Connect with RCA cables

Power amp (sold

Power amp (sold

This product Subwoofer output

System remote control

Front speaker Front speaker

3. BASIC ITEMS FOR SERVICE

No. Procedures Item to be confirmed

3.2 PCB LOCATIONS

D DVD Core Unit

E Compound Unit (A) F Compound Unit (B)

Unit Number : CWN3298(CN5) D