Product Marking

Biobore fittings are marked with the following information to give you full traceability
and allow easy identification.

1 SFL are proud of the products we manufacture and 5 Products produced to the ASME BPE standard are
ensure all are marked with our company logo. identified as such.

2 Traceability is crucial within the Pharmaceutical 6 The table or ‘DT’ number identifies the type of
industry. The Cast or Heat number will appear on fitting.i.e. a DT-9 is an equal tee with ends suitable
both the product and your material certificates. for orbital welding. DT numbers are referred to
Note: There may be more than one cast number throughout the catalogue.
marked on each complete fitting.
7 Surface finish designation. This code identifies the
3 The grade of material used to manufacture the internal surface finish and whether a product is
fitting. Usually 316L stainless steel. mechanically or electropolished. See table.

4 The reference number is part of our factory

traceability system.
Note: This is not a material cast number.

V-02
www.sfluk.co.uk
02
Biobore
Tubing and Fittings meet your processing needs
n ASME BPE
The American Society of Mechanical Engineers have developed a standard for Tubing and Fittings used in the
Pharmaceutical Industry (ASME Bioprocessing Equipment). This covers all aspects of the manufacturing process including
finishes, tolerances and dimensions.
Items covered by this standard are identified with the respective Table No. i.e. 90 Deg. Bend WW Table DT-7.
n ISO 9002 QUALITY SYSTEM
To ensure that we constantly maintain the standards stated our manufacturing and Quality System conforms to ISO 9002.
SFL have a continual commitment to quality and the system is audited internally and externally.
n PRODUCT RANGE
Product range covers sizes from 1/4” O.D. to 6” O.D. in tubing, weld end fittings suitable for orbital welding and clamp
ended fittings.
n DIMENSIONAL TOLERANCES
Tolerances on weld ended products are suitable for closed head orbital welding. Tolerances on squareness and wall thickness
comply with ASME BPE.
n SURFACE FINISH
Choice of 0.38 µm (15 Ra) to 0.8 µm (32 Ra) mechanical finish and 0.25 µm (10 Ra) to 0.5 µm (20 Ra) electropolished
finish on I.D. Finish on O.D. to suit customers requirements either Mill finish or sateen polished.
n CONTROLLED CHEMICAL ANALYSIS
All contact parts are manufactured from T316L quality materials. Sulphur is controlled at weld point to 0.005% minimum
and 0.017% maximum to ensure good quality orbital welds. Part of our Quality Control is to check that the raw materials
purchased conform to the Chemical Analysis stated on the Material Certificate, this is carried out by an independent
laboratory.
n TRACEABILITY
All materials are traceable back to the original Material Certificates. To ensure full traceability SFL mark all T316L
products with their manufacturing works order number in addition to their cast/heat number.
n MARKINGS
All products are marked with cast/heat number, works order number, ASME BPE table number and SFL logo.
n PACKAGING
Tubing is supplied with ends capped and sleeved in polythene, end heat sealed. Fittings are capped and heat sealed in
polythene.
SURFACE FINISH CODES
TUBING TABLE SF2
Designation µm(AV) µm(AV) µm(MAX) µm(MAX)
SFT 1 15 0.375 20 0.5 Mechanically Polished
SFT 2 20 0.5 25 0.625 Mechanically Polished
SFT 3 25 0.625 30 0.75 Mechanically Polished
SFT 4 10 0.25 15 0.375 Electro Polished
SFT 5 15 0.375 20 0.5 Electro Polished
SFT 6 20 0.5 25 0.625 Electro Polished
FITTINGS TABLE SF4
SFF 1 15 0.375 20 0.5 Mechanically Polished
SFF 2 20 0.5 25 0.625 Mechanically Polished
SFF 3 25 0.625 30 0.75 Mechanically Polished
SFF 4 10 0.25 15 0.375 Electro Polished
SFF 5 15 0.375 20 0.5 Electro Polished
SFF 6 20 0.5 25 0.625 Electro Polished

OTHER SURFACE FINISHES AVAILABLE ON REQUEST

www.sfluk.co.uk
03
 Biobore Bends
90° Bend WW Table DT-7
Size (ins) Part Code A (mm)
0.25 90B02WW 66.7
0.375 90B04WW 66.7
0.5 90B05WW 76.2
0.75 90B07WW 76.2
1.0 90B10WW 76.2
1.5 90B15WW 95.3
2.0 90B20WW 120.7
2.5 90B25WW 139.7
3.0 90B30WW 158.8
4.0 90B40WW 203.2
6.0 90B60WW 292.1

ASME BPE

90° Bend CW Table DT-12

Size (ins) Part Code A (mm) B (mm)
0.25 90B02CW 66.7 41.3
0.375 90B04CW 66.7 41.3
0.5 90B05CW 76.2 41.3
0.75 90B07CW 76.2 41.3
1.0 90B10CW 76.2 50.8
1.5 90B15CW 95.3 69.9
2.0 90B20CW 120.7 88.9
2.5 90B25CW 139.7 108.0
3.0 90B30CW 158.8 127.0
4.0 90B40CW 203.2 168.3
6.0 90B60CW 292.1 266.7

ASME BPE

90° Bend CC Table DT-16

Size (ins) Size Code A (mm)
0.25 90B02CC 41.3
0.375 90B04CC 41.3
0.50 90B05CC 41.3
0.75 90B07CC 41.3
1.00 90B10CC 50.8
1.50 90B15CC 69.9
2.00 90B20CC 88.9
2.50 90B25CC 108.0
3.00 90B30CC 127.0
4.00 90B40CC 168.3
6.00 90B60CC 266.7

ASME BPE

www.sfluk.co.uk
04
Biobore Bends
45° Bend WW Table DT-8
Size (ins) Part Code A (mm)
0.25 45B02WW 50.8
0.375 45B04WW 50.8
0.5 45B05WW 57.2
0.75 45B07WW 57.2
1.0 45B10WW 57.2
1.5 45B15WW 63.5
2.0 45B20WW 76.2
2.5 45B25WW 85.7
3.0 45B30WW 92.1
4.0 45B40WW 114.3
6.0 45B60WW 158.8

ASME BPE

45° Bend CW Table DT-13

Size (ins) Part Code A (mm) B (mm)
0.25 45B02CW 50.8 25.4
0.375 45B04CW 50.8 25.4
0.5 45B05CW 57.2 25.4
0.75 45B07CW 57.2 25.4
1.0 45B10CW 57.2 28.6
1.5 45B15CW 63.5 36.5
2.0 45B20CW 76.2 44.5
2.5 45B25CW 85.7 52.4
3.0 45B30CW 92.1 60.3
4.0 45B40CW 114.3 79.4
6.0 45B60CW 158.8 133.4

ASME BPE

45° Bend CC Table DT-17

Size (ins) Part Code A (mm)
0.25 45B02CC 25.4
0.375 45B04CC 25.4
0.50 45B05CC 25.4
0.75 45B07CC 25.4
1.00 45B10CC 28.6
1.50 45B15CC 36.5
2.00 45B20CC 44.5
2.50 45B25CC 52.4
3.00 45B30CC 60.3
4.00 45B40CC 79.4
6.00 45B60CC 133.4

ASME BPE

www.sfluk.co.uk
05
 Biobore Tees
Equal Tee WWW Table DT-9
Size (ins) Part Code A (mm)
0.25 ET02WWW 44.5
0.375 ET04WWW 44.5
0.5 ET05WWW 47.6
0.75 ET07WWW 50.8
1.0 ET10WWW 54.0
1.5 ET15WWW 60.3
2.0 ET20WWW 73.0
2.5 ET25WWW 79.4
3.0 ET30WWW 85.7
4.0 ET40WWW 104.8
6.0 ET60WWW 142.9

ASME BPE

Equal Outlet Tee WWC

Size (ins) Part Code A (mm) B (mm)
0.25 EOT02WWC 44.5 57.2
0.375 EOT04WWC 44.5 57.2
0.50 EOT05WWC 47.6 60.3
0.75 EOT07WWC 50.8 63.5
1.00 EOT10WWC 54.0 66.7
1.50 EOT15WWC 60.3 73.0
2.00 EOT20WWC 73.0 85.7
2.50 EOT25WWC 79.4 92.1
3.00 EOT30WWC 85.7 98.4
4.00 EOT40WWC 104.8 120.7
6.00 EOT60WWC 142.9 181.0

Equal Tee CCC Table DT-18

Size (ins) Part Code A (mm)

0.25 ET02CCC 57.2
0.375 ET04CCC 57.2
0.5 ET05CCC 57.2
0.75 ET07CCC 60.3
1.0 ET10CCC 66.7
1.5 ET15CCC 73.0
2.0 ET20CCC 85.7
2.5 ET25CCC 92.1
3.0 ET30CCC 98.4
4.0 ET40CCC 120.7
6.0 ET60CCC 181.0

ASME BPE

www.sfluk.co.uk
06
Biobore Tees
Equal Short Outlet Tee WWC Table DT-15
Size (ins) Part Code A (mm) B (mm)
0.25 ESOT02WWC 44.5 25.4
0.375 ESOT04WWC 44.5 25.4
0.5 ESOT05WWC 47.6 25.4
0.75 ESOT07WWC 50.8 28.6
1.0 ESOT10WWC 54.0 28.6
1.5 ESOT15WWC 60.3 34.9
2.0 ESOT20WWC 73.0 41.3
2.5 ESOT25WWC 79.4 47.6
3.0 ESOT30WWC 85.7 54.0
4.0 ESOT40WWC 104.8 69.9
6.0 ESOT60WWC 142.9 117.5
ASME BPE

Equal Short Outlet Tee CCC Table DT-27

Size (ins) Part Code A (mm) B (mm)
0.5 ESOT05CCC 57.2 25.4
0.75 ESOT07CCC 60.3 28.6
1.0 ESOT10CCC 66.7 28.6
1.5 ESOT15CCC 73.0 34.9
2.0 ESOT20CCC 85.7 41.3
2.5 ESOT25CCC 92.1 47.6
3.0 ESOT30CCC 98.4 54.0
4.0 ESOT40CCC 120.7 69.9
6.0 ESOT60CCC 181.0 117.5

ASME BPE

Reducing Tee WWW Table DT-10 Size (ins)

0.375 x 0.25
Part Code
RT0402WWW
A (mm)
44.5
B (mm)
44.5
0.50 x 0.25 RT0502WWW 47.6 47.6
0.50 x 0.375 RT0504WWW 47.6 47.6
0.75 x 0.25 RT0702WWW 50.8 50.8
0.75 x 0.375 RT0704WWW 50.8 50.8
0.75 x 0.50 RT0705WWW 50.8 50.8
1.0 x 0.25 RT1002WWW 54.0 54.0
1.0 x 0.375 RT1004WWW 54.0 54.0
1.0 x 0.5 RT1005WWW 54.0 54.0
1.0 x 0.75 RT1007WWW 54.0 54.0
1.5 x 0.5 RT1505WWW 60.3 60.3
1.5 X 0.75 RT1507WWW 60.3 60.3
1.5 x 1.0 RT1510WWW 60.3 60.3
2.0 x 0.5 RT2005WWW 73.0 66.7
2.0 x 0.75 RT2007WWW 73.0 66.7
2.0 x 1.0 RT2010WWW 73.0 66.7
2.0 x 1.5 RT2015WWW 73.0 66.7
2.5 x 0.5 RT2505WWW 79.4 73.0
2.5 x 0.75 RT2507WWW 79.4 73.0
2.5 x 1.0 RT2510WWW 79.4 73.0
2.5 x 1.5 RT2515WWW 79.4 73.0
2.5 x 2.0 RT2520WWW 79.4 73.0
3.0 x 0.5 RT3005WWW 85.7 79.4
3.0 x 0.75 RT3007WWW 85.7 79.4
3.0 x 1.0 RT3010WWW 85.7 79.4
3.0 x 1.5 RT3015WWW 85.7 79.4
ASME BPE 3.0 x 2.0 RT3020WWW 85.7 79.4
3.0 x 2.5 RT3025WWW 85.7 79.4
4.0 x 0.5 RT4005WWW 104.8 92.1
4.0 x 0.75 RT4007WWW 104.8 92.1
4.0 x 1.0 RT4010WWW 104.8 92.1
4.0 x 1.5 RT4015WWW 104.8 92.1
4.0 x 2.0 RT4020WWW 104.8 98.4
4.0 x 2.5 RT4025WWW 104.8 98.4
4.0 x 3.0 RT4030WWW 104.8 98.4
6.0 x 4.0 RT6040WWW 142.9 130.2

www.sfluk.co.uk
07
 Biobore Tees
Reducing Tee WWC Size (ins) Part Code A (mm) B (mm)
0.375 x 0.25 RT0402WWC 44.5 57.2
0.50 x 0.25 RT0502WWC 47.6 60.3
0.50 x 0.375 RT0504WWC 47.6 60.3
0.75 x 0.25 RT0702WWC 50.8 63.5
0.75 x 0.375 RT0704WWC 50.8 63.5
0.75 x 0.50 RT0705WWC 50.8 63.5
1.0 x 0.25 RT1002WWC 54.0 66.7
1.0 x 0.375 RT1004WWC 54.0 66.7
1.0 x 0.5 RT1005WWC 54.0 66.7
1.0 x 0.75 RT1007WWC 54.0 66.7
1.5 x 0.5 RT1505WWC 60.3 73.0
1.5 X 0.75 RT1507WWC 60.3 73.0
1.5 x 1.0 RT1510WWC 60.3 73.0
2.0 x 0.5 RT2005WWC 73.0 79.4
2.0 x 0.75 RT2007WWC 73.0 79.4
2.0 x 1.0 RT2010WWC 73.0 79.4
2.0 x 1.5 RT2015WWC 73.0 79.4
2.5 x 0.5 RT2505WWC 79.4 85.7
2.5 x 0.75 RT2507WWC 79.4 85.7
2.5 x 1.0 RT2510WWC 79.4 85.7
2.5 x 1.5 RT2515WWC 79.4 85.7
2.5 x 2.0 RT2520WWC 79.4 85.7
3.0 x 0.5 RT3005WWC 85.7 92.1
3.0 x 0.75 RT3007WWC 85.7 92.1
3.0 x 1.0 RT3010WWC 85.7 92.1
3.0 x 1.5 RT3015WWC 85.7 92.1
3.0 x 2.0 RT3020WWC 85.7 92.1
3.0 x 2.5 RT3025WWC 85.7 92.1
4.0 x 0.5 RT4005WWC 104.8 104.8
4.0 x 0.75 RT4007WWC 104.8 104.8
4.0 x 1.0 RT4010WWC 104.8 104.8
4.0 x 1.5 RT4015WWC 104.8 104.8
4.0 x 2.0 RT4020WWC 104.8 111.1
4.0 x 2.5 RT4025WWC 104.8 111.1
4.0 x 3.0 RT4030WWC 104.8 111.1
6.0 x 2.0 RT6020WWC 142.9 168.3
6.0 x 2.5 RT6025WWC 142.9 181.0
6.0 x 3.0 RT6030WWC 142.9 181.0
6.0 x 4.0 RT6040WWC 142.9 181.0

Reducing Tee CCC Table DT-19 Size (ins) Part Code A (mm) B (mm)
0.375 x 0.25 RT0402CCC 57.2 57.2
0.50 x 0.25 RT0502CCC 60.3 60.3
0.50 x 0.375 RT0504CCC 60.3 60.3
0.75 x 0.25 RT0702CCC 63.5 63.5
0.75 x 0.375 RT0704CCC 63.5 63.5
0.75 x 0.50 RT0705CCC 63.5 63.5
1.0 x 0.25 RT1002CCC 66.7 66.7
1.0 x 0.375 RT1004CCC 66.7 66.7
1.0 x 0.5 RT1005CCC 66.7 66.7
1.0 x 0.75 RT1007CCC 66.7 66.7
1.5 x 0.5 RT1505CCC 73.0 73.0
1.5 X 0.75 RT1507CCC 73.0 73.0
1.5 x 1.0 RT1510CCC 73.0 73.0
2.0 x 0.5 RT2005CCC 85.7 79.4
2.0 x 0.75 RT2007CCC 85.7 79.4
2.0 x 1.0 RT2010CCC 85.7 79.4
2.0 x 1.5 RT2015CCC 85.7 79.4
2.5 x 0.5 RT2505CCC 92.1 85.7
2.5 x 0.75 RT2507CCC 92.1 85.7
2.5 x 1.0 RT2510CCC 92.1 85.7
2.5 x 1.5 RT2515CCC 92.1 85.7
2.5 x 2.0 RT2520CCC 92.1 85.7
3.0 x 0.5 RT3005CCC 98.4 92.1
3.0 x 0.75 RT3007CCC 98.4 92.1
3.0 x 1.0 RT3010CCC 98.4 92.1
3.0 x 1.5 RT3015CCC 98.4 92.1
3.0 x 2.0 RT3020CCC 98.4 98.4
ASME BPE 3.0 x 2.5 RT3025CCC 98.4 98.4
4.0 x 0.5 RT4005CCC 120.7 104.8
4.0 x 0.75 RT4007CCC 120.7 104.8
4.0 x 1.0 RT4010CCC 120.7 104.8
4.0 x 1.5 RT4015CCC 120.7 104.8
4.0 x 2.0 RT4020CCC 120.7 111.1
4.0 x 2.5 RT4025CCC 120.7 111.1
4.0 x 3.0 RT4030CCC 120.7 111.1
6.0 x 4.0 RT6040CCC 181.0 146.1

www.sfluk.co.uk
08
Biobore Tees
Reducing Short Outlet Tee WWC Size (ins)
0.375 x 0.25
Part Code
RSOT0402WWC
A (mm)
44.5
B (mm)
25.4
Table DT-14 0.50 x 0.25
0.50 x 0.375
RSOT0502WWC
RSOT0504WWC
47.6
47.6
25.4
25.4
0.75 x 0.25 RSOT0702WWC 50.8 25.4
0.75 x 0.375 RSOT0704WWC 50.8 25.4
0.75 x 0.50 RSOT0705WWC 50.8 25.4
1.0 x 0.25 RSOT1002WWC 54.0 28.6
1.0 x 0.375 RSOT1004WWC 54.0 28.6
1.0 x 0.5 RSOT1005WWC 54.0 28.6
1.0 x 0.75 RSOT1007WWC 54.0 28.6
1.5 x 0.5 RSOT1505WWC 60.3 34.9
1.5 X 0.75 RSOT1507WWC 60.3 34.9
1.5 x 1.0 RSOT1510WWC 60.3 34.9
2.0 x 0.5 RSOT2005WWC 73.0 41.3
2.0 x 0.75 RSOT2007WWC 73.0 41.3
2.0 x 1.0 RSOT2010WWC 73.0 41.3
2.0 x 1.5 RSOT2015WWC 73.0 41.3
2.5 x 0.5 RSOT2505WWC 79.4 47.6
2.5 x 0.75 RSOT2507WWC 79.4 47.6
2.5 x 1.0 RSOT2510WWC 79.4 47.6
2.5 x 1.5 RSOT2515WWC 79.4 47.6
2.5 x 2.0 RSOT2520WWC 79.4 47.6
3.0 x 0.5 RSOT3005WWC 85.7 54.0
3.0 x 0.75 RSOT3007WWC 85.7 54.0
3.0 x 1.0 RSOT3010WWC 85.7 54.0
3.0 x 1.5 RSOT3015WWC 85.7 54.0
3.0 x 2.0 RSOT3020WWC 85.7 54.0
3.0 x 2.5 RSOT3025WWC 85.7 54.0
4.0 x 0.5 RSOT4005WWC 104.8 66.7
4.0 x 0.75 RSOT4007WWC 104.8 66.7
ASME BPE
4.0 x 1.0 RSOT4010WWC 104.8 66.7
4.0 x 1.5 RSOT4015WWC 104.8 66.7
4.0 x 2.0 RSOT4020WWC 104.8 66.7
4.0 x 2.5 RSOT4025WWC 104.8 66.7
4.0 x 3.0 RSOT4030WWC 104.8 66.7
6.0 x 4.0 RSOT6040WWW 142.9 95.3

Reducing Short Outlet Tee CCC Size (ins)

0.375 x 0.25
Part Code
RSOT0402CCC
A (mm)
57.2
B (mm)
25.4
Table DT-20 0.50 x 0.25
0.50 x 0.375
RSOT0502CCC
RSOT0504CCC
60.3
60.3
25.4
25.4
0.75 x 0.25 RSOT0702CCC 63.5 25.4
0.75 x 0.375 RSOT0704CCC 63.5 25.4
0.75 x 0.50 RSOT0705CCC 63.5 25.4
1.0 x 0.25 RSOT1002CCC 66.7 28.6
1.0 x 0.375 RSOT1004CCC 66.7 28.6
1.0 x 0.5 RSOT1005CCC 66.7 28.6
1.0 x 0.75 RSOT1007CCC 66.7 28.6
1.5 x 0.5 RSOT1505CCC 73.0 34.9
1.5 X 0.75 RSOT1507CCC 73.0 34.9
1.5 x 1.0 RSOT1510CCC 73.0 34.9
2.0 x 0.5 RSOT2005CCC 85.7 41.3
2.0 x 0.75 RSOT2007CCC 85.7 41.3
2.0 x 1.0 RSOT2010CCC 85.7 41.3
2.0 x 1.5 RSOT2015CCC 85.7 41.3
2.5 x 0.5 RSOT2505CCC 92.1 47.6
2.5 x 0.75 RSOT2507CCC 92.1 47.6
2.5 x 1.0 RSOT2510CCC 92.1 47.6
2.5 x 1.5 RSOT2515CCC 92.1 47.6
2.5 x 2.0 RSOT2520CCC 92.1 47.6
3.0 x 0.5 RSOT3005CCC 98.4 54.0
3.0 x 0.75 RSOT3007CCC 98.4 54.0
3.0 x 1.0 RSOT3010CCC 98.4 54.0
3.0 x 1.5 RSOT3015CCC 98.4 54.0
3.0 x 2.0 RSOT3020CCC 98.4 54.0
3.0 x 2.5 RSOT3025CCC 98.4 54.0
4.0 x 0.5 RSOT4005CCC 120.7 66.7
ASME BPE 4.0 x 0.75 RSOT4007CCC 120.7 66.7
4.0 x 1.0 RSOT4010CCC 120.7 66.7
4.0 x 1.5 RSOT4015CCC 120.7 66.7
4.0 x 2.0 RSOT4020CCC 120.7 66.7
4.0 x 2.5 RSOT4025CCC 120.7 66.7
4.0 x 3.0 RSOT4030CCC 120.7 66.7
6.0 x 4.0 RSOT6040CCC 181.0 95.3

www.sfluk.co.uk
09
 Biobore Tees
Equal Cross WWWW Table DT-9B
Size (ins) Part Code A (mm)
0.25 EC02WWWW 44.5
0.375 EC04WWWW 44.5
0.5 EC05WWWW 47.6
0.75 EC07WWWW 50.8
1.0 EC10WWWW 54.0
1.5 EC15WWWW 60.3
2.0 EC20WWWW 73.0
2.5 EC25WWWW 79.4
3.0 EC30WWWW 85.7
4.0 EC40WWWW 104.8
6.0 EC60WWWW 142.9

ASME BPE

Equal Cross CCCC Table DT-18B

Size (ins) Part Code A (mm)
0.25 EC02CCCC 57.2
0.375 EC04CCCC 57.2
0.5 EC05CCCC 57.2
0.75 EC07CCCC 60.3
1.0 EC10CCCC 66.7
1.5 EC15CCCC 73.0
2.0 EC20CCCC 85.7
2.5 EC25CCCC 92.1
3.0 EC30CCCC 98.4
4.0 EC40CCCC 120.7
6.0 EC60CCCC 181.0

ASME BPE

Reducing Cross WWWW Size (ins)

0.375 x 0.25
Part Code
RC0402WWWW
A (mm)
44.5
B (mm)
44.5
0.50 x 0.25 RC0502WWWW 47.6 47.6
0.50 x 0.375 RC0504WWWW 47.6 47.6
0.75 x 0.25 RC0702WWWW 50.8 50.8
0.75 x 0.375 RC0704WWWW 50.8 50.8
0.75 x 0.50 RC0705WWWW 50.8 50.8
1.0 x 0.25 RC1002WWWW 54.0 54.0
1.0 x 0.375 RC1004WWWW 54.0 54.0
1.0 x 0.5 RC1005WWWW 54.0 54.0
1.0 x 0.75 RC1007WWWW 54.0 54.0
1.5 x 0.5 RC1505WWWW 60.3 60.3
1.5 X 0.75 RC1507WWWW 60.3 60.3
1.5 x 1.0 RC1510WWWW 60.3 60.3
2.0 x 0.5 RC2005WWWW 73.0 66.7
2.0 x 0.75 RC2007WWWW 73.0 66.7
2.0 x 1.0 RC2010WWWW 73.0 66.7
2.0 x 1.5 RC2015WWWW 73.0 66.7
2.5 x 0.5 RC2505WWWW 79.4 73.0
2.5 x 0.75 RC2507WWWW 79.4 73.0
2.5 x 1.0 RC2510WWWW 79.4 73.0
2.5 x 1.5 RC2515WWWW 79.4 73.0
2.5 x 2.0 RC2520WWWW 79.4 73.0
3.0 x 0.5 RC3005WWWW 85.7 79.4
3.0 x 0.75 RC3007WWWW 85.7 79.4
3.0 x 1.0 RC3010WWWW 85.7 79.4
3.0 x 1.5 RC3015WWWW 85.7 79.4
3.0 x 2.0 RC3020WWWW 85.7 79.4
3.0 x 2.5 RC3025WWWW 85.7 79.4
4.0 x 0.5 RC4005WWWW 104.8 92.1
4.0 x 0.75 RC4007WWWW 104.8 92.1
4.0 x 1.0 RC4010WWWW 104.8 92.1
4.0 x 1.5 RC4015WWWW 104.8 92.1
4.0 x 2.0 RC4020WWWW 104.8 98.4
4.0 x 2.5 RC4025WWWW 104.8 98.4
4.0 x 3.0 RC4030WWWW 104.8 98.4
6.0 x 2.0 RC6020WWWW 142.9 130.2
6.0 x 2.5 RC6025WWWW 142.9 130.2
6.0 x 3.0 RC6030WWWW 142.9 130.2
6.0 x 4.0 RC6040WWWW 142.9 130.2

www.sfluk.co.uk
10
Biobore Tees
Instrument Tee WWC Table DT-28 Size (ins)
1.0 x 0.5
Part Code
IT1005WWC
A (mm)
63.5
B (mm)
22.2
1.0 x 0.75 IT1007WWC 63.5 25.4
1.5 x 0.5 IT1505WWC 63.5 22.2†
1.5 X 0.75 IT1507WWC 63.5 25.4†
1.5 x 1.0 IT1510WWC 63.5 28.6†
2.0 x 0.5 IT2005WWC 69.8 25.4†
2.0 x 0.75 IT2007WWC 69.8 28.6†
2.0 x 1.0 IT2010WWC 69.8 31.8†
2.0 x 1.5 IT2015WWC 69.8 38.1†
2.5 x 0.5 IT2505WWC 85.0 35.0
2.5 x 0.75 IT2507WWC 85.0 38.1
2.5 x 1.0 IT2510WWC 85.0 41.3
2.5 x 1.5 IT2515WWC 85.0 44.5
2.5 x 2.0 IT2520WWC 85.0 48.0
3.0 x 0.5 IT3005WWC 90.0 38.1
3.0 x 0.75 IT3007WWC 90.0 41.3
3.0 x 1.0 IT3010WWC 90.0 44.5
3.0 x 1.5 IT3015WWC 90.0 48.0
3.0 x 2.0 IT3020WWC 90.0 50.8
3.0 x 2.5 IT3025WWC 90.0 54.0
4.0 x 0.5 IT4005WWC 110.0 79.4
4.0 x 0.75 IT4007WWC 110.0 82.6
4.0 x 1.0 IT4010WWC 110.0 85.7
4.0 x 1.5 IT4015WWC 110.0 88.9
4.0 x 2.0 IT4020WWC 110.0 95.2
4.0 x 2.5 IT4025WWC 110.0 98.4
4.0 x 3.0 IT4030WWC 110.0 101.6
ASME BPE*

Instrument Tee CCC Table DT-29 Size (ins)

1.0 x 0.5
Part Code
IT1005CCC
A (mm)
77.0
B (mm)
22.2
1.0 x 0.75 IT1007CCC 77.0 25.4
1.5 x 0.5 IT1505CCC 76.2 22.2†
1.5 X 0.75 IT1507CCC 76.2 25.4†
1.5 x 1.0 IT1510CCC 76.2 28.6†
2.0 x 0.5 IT2005CCC 82.6 25.4†
2.0 x 0.75 IT2007CCC 82.6 28.6†
2.0 x 1.0 IT2010CCC 82.6 31.8†
2.0 x 1.5 IT2015CCC 82.6 38.1†
2.5 x 0.5 IT2505CCC 97.0 35.0
2.5 x 0.75 IT2507CCC 97.0 38.1
2.5 x 1.0 IT2510CCC 97.0 41.3
2.5 x 1.5 IT2515CCC 97.0 44.5
2.5 x 2.0 IT2520CCC 97.0 48.0
3.0 x 0.5 IT3005CCC 102.0 38.1
3.0 x 0.75 IT3007CCC 102.0 41.3
3.0 x 1.0 IT3010CCC 102.0 44.5
3.0 x 1.5 IT3015CCC 102.0 48.0
3.0 x 2.0 IT3020CCC 102.0 50.8
3.0 x 2.5 IT3025CCC 102.0 54.0
4.0 x 0.5 IT4005CCC 122.0 79.4
4.0 x 0.75 IT4007CCC 122.0 82.6
4.0 x 1.0 IT4010CCC 122.0 85.7
ASME BPE* 4.0 x 1.5 IT4015CCC 122.0 88.9
4.0 x 2.0 IT4020CCC 122.0 95.2
4.0 x 2.5 IT4025CCC 122.0 98.4
4.0 x 3.0 IT4030CCC 122.0 101.6

*A limited number of WWC and CCC Instrument Tees are now included in the BPE Standard.
Those covered by the Standard are identified by the symbol †

www.sfluk.co.uk
11
 Biobore Outlet Bends
Outlet Loop WWC Table DT-23 Size (ins)
1.0 x 0.5
Part Code
OL1005WWC
A (mm)
114.3
B (mm)
76.2
C (mm)
31.7
1.0 x 0.75 OL1007WWC 114.3 76.2 31.7
1.5 x 0.5 OL1505WWC 152.4 114.3 38.1
1.5 X 0.75 OL1507WWC 152.4 114.3 38.1
1.5 x 1.0 OL1510WWC 152.4 114.3 38.1
2.0 x 0.5 OL2005WWC 152.4 127.0 44.5
2.0 x 0.75 OL2007WWC 152.4 127.0 44.5
2.0 x 1.0 OL2010WWC 152.4 127.0 50.8
2.0 x 1.5 OL2015WWC 152.4 127.0 44.5
2.5 x 0.5 OL2505WWC 190.5 146.1 50.8
2.5 x 0.75 OL2507WWC 190.5 146.1 50.8
2.5 x 1.0 OL2510WWC 190.5 146.1 55.5
2.5 x 1.5 OL2515WWC 190.5 146.1 50.8
2.5 x 2.0 OL2520WWC 190.5 146.1 60.3
3.0 x 0.5 OL3005WWC 228.6 165.1 57.2
3.0 x 0.75 OL3007WWC 228.6 165.1 57.2
3.0 x 1.0 OL3010WWC 228.6 165.1 63.5
3.0 x 1.5 OL3015WWC 228.6 165.1 58.7
3.0 x 2.0 OL3020WWC 228.6 165.1 57.2
3.0 x 2.5 OL3025WWC 228.6 165.1 66.7
4.0 x 0.5 OL4005WWC 304.8 215.9 69.8
4.0 x 0.75 OL4007WWC 304.8 215.9 69.8
4.0 x 1.0 OL4010WWC 304.8 215.9 77.8
4.0 x 1.5 OL4015WWC 304.8 215.9 74.6
4.0 x 2.0 OL4020WWC 304.8 215.9 69.8
4.0 x 2.5 OL4025WWC 304.8 215.9 79.4
ASME BPE 4.0 x 3.0 OL4030WWC 304.8 215.9 79.4

Outlet Loop CCC Table DT-24 Size (ins)

1.0 x 0.5
Part Code
OL1005CCC
A (mm)
114.3
B (mm)
88.9
C (mm)
31.7
1.0 x 0.75 OL1007CCC 114.3 88.9 31.7
1.5 x 0.5 OL1505CCC 152.4 127.0 38.1
1.5 X 0.75 OL1507CCC 152.4 127.0 38.1
1.5 x 1.0 OL1510CCC 152.4 127.0 38.1
2.0 x 0.5 OL2005CCC 152.4 139.7 44.5
2.0 x 0.75 OL2007CCC 152.4 139.7 44.5
2.0 x 1.0 OL2010CCC 152.4 139.7 50.8
2.0 x 1.5 OL2015CCC 152.4 139.7 44.5
2.5 x 0.5 OL2505CCC 190.5 165.1 50.8
2.5 x 0.75 OL2507CCC 190.5 165.1 50.8
2.5 x 1.0 OL2510CCC 190.5 165.1 55.5
2.5 x 1.5 OL2515CCC 190.5 165.1 50.8
2.5 x 2.0 OL2520CCC 190.5 165.1 60.3
3.0 x 0.5 OL3005CCC 228.6 177.8 57.2
3.0 x 0.75 OL3007CCC 228.6 177.8 57.2
3.0 x 1.0 OL3010CCC 228.6 177.8 63.5
3.0 x 1.5 OL3015CCC 228.6 177.8 58.7
3.0 x 2.0 OL3020CCC 228.6 177.8 57.2
3.0 x 2.5 OL3025CCC 228.6 177.8 66.7
4.0 x 0.5 OL4005CCC 304.8 231.8 69.8
4.0 x 0.75 OL4007CCC 304.8 231.8 69.8
4.0 x 1.0 OL4010CCC 304.8 231.8 77.8
4.0 x 1.5 OL4015CCC 304.8 231.8 74.6
4.0 x 2.0 OL4020CCC 304.8 231.8 69.8
4.0 x 2.5 OL4025CCC 304.8 231.8 79.4
ASME BPE 4.0 x 3.0 OL4030CCC 304.8 231.8 79.4

www.sfluk.co.uk
12
Biobore Tees
Short Outlet Run Tee Table DT-25

Size (ins) Part Code A (mm) B (mm) C (mm)

0.25 SORT02WWC 22.4 44.5 44.5
0.375 SORT04WWC 22.4 44.5 44.5
0.5 SORT05WWC 22.4 47.6 47.6
0.75 SORT07WWC 25.4 50.4 50.4
1.0 SORT10WWC 28.5 53.9 53.9
1.5 SORT15WWC 35.1 60.3 60.3
2.0 SORT20WWC 41.2 73.0 73.0
2.5 SORT25WWC 47.8 79.4 79.4
3.0 SORT30WWC 53.9 85.7 85.7
4.0 SORT40WWC 69.9 104.8 104.8
6.0 SORT60WWC 117.5 142.9 142.9

ASME BPE

Swept Tee

Size (ins) Part Code A (mm)

0.75 ST07WWW 73
1.0 ST10WWW 73
1.5 ST15WWW 92
2.0 ST20WWW 118
2.5 ST25WWW 136
3.0 ST30WWW 155
4.0 ST40WWW 200
6.0 ST60WWW 290

www.sfluk.co.uk
13
 Biobore Reducers
Concentric Reducer CW Size (ins)
0.75 x 0.50
Part Code
CR0705CW
A (mm)
76.2
1.0 x 0.5 CR1005CW 88.9
Table DT-26 1.0 x 0.75 CR1007CW 76.2
1.5 x 0.5 CR1505CW 114.3
1.5 X 0.75 CR1507CW 101.6
1.5 x 1.0 CR1510CW 101.6
2.0 x 0.5 CR2005CW 165.1
2.0 x 0.75 CR2007CW 152.4
2.0 x 1.0 CR2010CW 152.4
2.0 x 1.5 CR2015CW 101.6
2.5 x 0.5 CR2505CW 215.9
2.5 x 0.75 CR2507CW 203.2
2.5 x 1.0 CR2510CW 203.2
2.5 x 1.5 CR2515CW 152.4
2.5 x 2.0 CR2520CW 107.9
3.0 x 1.0 CR3010CW 254.0
3.0 x 1.5 CR3015CW 203.2
3.0 x 2.0 CR3020CW 158.8
3.0 x 2.5 CR3025CW 108.0
4.0 x 1.0 CR4010CW 358.8
4.0 x 1.5 CR4015CW 308.0
4.0 x 2.0 CR4020CW 263.5
4.0 x 2.5 CR4025CW 212.7
4.0 x 3.0 CR4030CW 161.9
ASME BPE 6.0 x 4.0 CR6040CW 228.6

Eccentric Reducer CW Size (ins)

0.75 x 0.50
Part Code
ER0705CW
A (mm)
76.2
1.0 x 0.5 ER1005CW 88.9
Table DT-26 1.0 x 0.75 ER1007CW 76.2
1.5 x 0.5 ER1505CW 114.3
1.5 X 0.75 ER1507CW 101.6
1.5 x 1.0 ER1510CW 101.6
2.0 x 0.5 ER2005CW 165.1
2.0 x 0.75 ER2007CW 152.4
2.0 x 1.0 ER2010CW 152.4
2.0 x 1.5 ER2015CW 101.6
2.5 x 0.5 ER2505CW 215.9
2.5 x 0.75 ER2507CW 203.2
2.5 x 1.0 ER2510CW 203.2
2.5 x 1.5 ER2515CW 152.4
2.5 x 2.0 ER2520CW 108.0
3.0 x 1.0 ER3010CW 254.0
3.0 x 1.5 ER3015CW 203.2
3.0 x 2.0 ER3020CW 158.8
3.0 x 2.5 ER3025CW 108.0
4.0 x 1.0 ER4010CW 358.8
4.0 x 1.5 ER4015CW 308.0
4.0 x 2.0 ER4020CW 263.5
4.0 x 2.5 ER4025CW 212.7
4.0 x 3.0 ER4030CW 161.9
6.0 x 4.0 ER6040CW 228.6
ASME BPE

www.sfluk.co.uk
14
Biobore Reducers
N594 Concentric Reducer WW

Size (ins) Part Code A (mm) B (mm)

0.75 x 0.5 N594 0705 70.0 40.80
1.0 x 0.5 N594 1005 70.0 37.65
1.0 x 0.75 N594 1007 70.0 40.80
1.5 x 0.5 N594 1505 70.0 31.30
1.5 x 0.75 N594 1507 70.0 34.50
1.5 x 1.0 N594 1510 70.0 37.65
2.0 x 0.5 N594 2005 70.0 24.95
2.0 x 0.75 N594 2007 70.0 28.10
2.0 x 1.0 N594 2010 70.0 31.30
2.0 x 1.5 N594 2015 70.0 37.65

Concentric Reducer WW Size (ins) Part Code A (mm)

0.375 x 0.25 CR0402WW 82.6
Table DT-11 0.50 x 0.25
0.50 x 0.375
CR0502WW
CR0504WW
82.6
82.6
0.75 x 0.25 CR0702WW 82.6
0.75 x 0.375 CR0704WW 82.6
0.75 x 0.50 CR0705WW 101.6
1.0 x 0.25 CR1002WW 114.3
1.0 x 0.375 CR1004WW 114.3
1.0 x 0.5 CR1005WW 114.3
1.0 x 0.75 CR1007WW 101.6
1.5 x 0.5 CR1505WW 139.7
1.5 X 0.75 CR1507WW 127.0
1.5 x 1.0 CR1510WW 127.0
2.0 x 0.5 CR2005WW 196.9
2.0 x 0.75 CR2007WW 184.2
2.0 x 1.0 CR2010WW 184.2
2.0 x 1.5 CR2015WW 133.4
2.5 x 0.5 CR2505WW 247.7
2.5 x 0.75 CR2507WW 235.0
2.5 x 1.0 CR2510WW 235.0
2.5 x 1.5 CR2515WW 184.2
2.5 x 2.0 CR2520WW 139.7
3.0 x 1.0 CR3010WW 285.8
3.0 x 1.5 CR3015WW 235.0
3.0 x 2.0 CR3020WW 190.5
3.0 x 2.5 CR3025WW 139.7
ASME BPE 4.0 x 1.0 CR4010WW 393.7
4.0 x 1.5 CR4015WW 342.9
4.0 x 2.0 CR4020WW 298.5
4.0 x 2.5 CR4025WW 247.7
4.0 x 3.0 CR4030WW 196.9
6.0 x 4.0 CR6040WW 254.0

www.sfluk.co.uk
15
 Biobore Reducers
Concentric Reducer CC Size (ins) Part Code A (mm)
0.75 x 0.50 CR0705CC 50.8
Table DT-21 1.0 x 0.5
1.0 x 0.75
CR1005CC
CR1007CC
63.5
50.8
1.5 x 0.5 CR1505CC 88.9
1.5 X 0.75 CR1507CC 76.2
1.5 x 1.0 CR1510CC 76.2
2.0 x 0.5 CR2005CC 139.7
2.0 x 0.75 CR2007CC 127.0
2.0 x 1.0 CR2010CC 127.0
2.0 x 1.5 CR2015CC 76.2
2.5 x 0.5 CR2505CC 190.5
2.5 x 0.75 CR2507CC 177.8
2.5 x 1.0 CR2510CC 177.8
2.5 x 1.5 CR2515CC 127.0
2.5 x 2.0 CR2520CC 76.2
3.0 x 1.0 CR3010CC 228.6
3.0 x 1.5 CR3015CC 177.8
3.0 x 2.0 CR3020CC 127.0
3.0 x 2.5 CR3025CC 76.2
4.0 x 1.0 CR4010CC 333.4
4.0 x 1.5 CR4015CC 282.6
4.0 x 2.0 CR4015CC 231.8
4.0 x 2.5 CR4025CC 181.0
4.0 x 3.0 CR4030CC 130.2
ASME BPE 6.0 x 4.0 CR6040CC 193.7

N595 Eccentric Reducer WW

Size (ins) Part Code A (mm) B (mm)

0.75 x 0.5 N595 0705 70.0 37.65
1.0 x 0.5 N595 1005 70.0 31.30
1.0 x 0.75 N595 1007 70.0 37.65
1.5 x 0.5 N595 1505 70.0 24.95
1.5 x 0.75 N595 1507 70.0 24.95
1.5 x 1.0 N595 1510 70.0 37.65
2.0 x 0.5 N595 2005 70.0 18.60
2.0 x 0.75 N595 2007 70.0 18.60
2.0 x 1.0 N595 2010 70.0 18.60
2.0 x 1.5 N595 2015 70.0 37.65

www.sfluk.co.uk
16
Biobore Reducers
Eccentric Reducer WW Size (ins)
0.375 x 0.25
Part Code
ER0402WW
A (mm)
101.6
0.50 x 0.25 ER0502WW 101.6
Table DT-11 0.50 x 0.375 ER0504WW 101.6
0.75 x 0.25 ER0702WW 101.6
0.75 x 0.375 ER0704WW 101.6
0.75 x 0.50 ER0705WW 101.6
1.0 x 0.25 ER1002WW 114.3
1.0 x 0.375 ER1004WW 114.3
1.0 x 0.5 ER1005WW 114.3
1.0 x 0.75 ER1007WW 101.6
1.5 x 0.5 ER1505WW 139.7
1.5 X 0.75 ER1507WW 127.0
1.5 x 1.0 ER1510WW 127.0
2.0 x 0.5 ER2005WW 196.9
2.0 x 0.75 ER2007WW 184.2
2.0 x 1.0 ER2010WW 184.2
2.0 x 1.5 ER2015WW 133.4
2.5 x 0.5 ER2505WW 247.7
2.5 x 0.75 ER2507WW 235.0
2.5 x 1.0 ER2510WW 235.0
2.5 x 1.5 ER2515WW 184.2
2.5 x 2.0 ER2520WW 139.7
3.0 x 1.0 ER3010WW 285.8
3.0 x 1.5 ER3015WW 235.0
3.0 x 2.0 ER3020WW 190.5
3.0 x 2.5 ER3025WW 139.7
4.0 x 1.0 ER4010WW 393.7
4.0 x 1.5 ER4015WW 342.9
ASME BPE 4.0 x 2.0 ER4020WW 298.5
4.0 x 2.5 ER4025WW 247.7
4.0 x 3.0 ER4030WW 196.9
6.0 x 4.0 ER6040WW 254.0

Eccentric Reducer CC Size (ins)

0.75 x 0.50
Part Code
ER0705CC
A (mm)
50.8
1.0 x 0.5 ER1005CC 63.5
Table DT-21 1.0 x 0.75 ER1007CC 50.8
1.5 x 0.5 ER1505CC 88.9
1.5 X 0.75 ER1507CC 76.2
1.5 x 1.0 ER1510CC 76.2
2.0 x 0.5 ER2005CC 139.7
2.0 x 0.75 ER2007CC 127.0
2.0 x 1.0 ER2010CC 127.0
2.0 x 1.5 ER2015CC 76.2
2.5 x 0.5 ER2505CC 190.5
2.5 x 0.75 ER2507CC 177.8
2.5 x 1.0 ER2510CC 177.8
2.5 x 1.5 ER2515CC 127.0
2.5 x 2.0 ER2520CC 76.2
3.0 x 1.0 ER3010CC 228.6
3.0 x 1.5 ER3015CC 177.8
3.0 x 2.0 ER3020CC 127.0
3.0 x 2.5 ER3025CC 76.2
4.0 x 1.0 ER4010CC 333.4
4.0 x 1.5 ER4015CC 282.6
4.0 x 2.0 ER4020CC 231.7
4.0 x 2.5 ER4025CC 180.9
4.0 x 3.0 ER4030CC 130.1
6.0 x 4.0 ER6040CC 193.8
ASME BPE

www.sfluk.co.uk
17
 Biobore Ferrules
Clamp Ferrule Table DT-22
Size (ins) Part Code A (mm) B (mm)
0.25 CF02TL 25.0 44.5
0.375 CF04TL 25.0 44.5
0.5 CF05TL 25.0 44.5
0.75 CF07TL 25.0 44.5
1.0 CF10TL 50.4 44.5
1.5 CF15TL 50.4 44.5
2.0 CF20TL 63.9 57.2
2.5 CF25TL 77.4 57.2
3.0 CF30TL 90.9 57.2
4.0 CF40TL 118.9 57.2
1
⁄” & ⁄”
2
3
4 1” to 6” 6.0 CF60TL 166.9 76.2

ASME BPE

K124 Clamp Ferrule

Size (ins) Part Code A (mm) B (mm)
0.5 K124 05 25.0 28.6
0.75 K124 07 25.0 28.6
1.0 K124 10 50.4 28.6
1.5 K124 15 50.4 28.6
2.0 K124 20 63.9 28.6
2.5 K124 25 77.4 28.6
3.0 K124 30 90.9 28.6
4.0 K124 40 118.9 28.6

1
⁄” & ⁄”
2
3
4 1” to 4”

K125 Clamp Ferrule - Short

Size (ins) Part Code A (mm) B (mm)
0.5 K125 05 25.0 12.7
0.75 K125 07 25.0 12.7
1.0 K125 10 50.4 12.7
1.5 K125 15 50.4 12.7
2.0 K125 20 63.9 12.7
2.5 K125 25 77.4 12.7
3.0 K125 30 90.9 12.7
4.0 K125 40 118.9 12.7

⁄” & ⁄”
1
2
3
4 1” to 4”

K135 Clamp Ferrule

Size (ins) Part Code A (mm) B (mm)
0.5 K135 05 25.0 21.5
0.75 K135 07 25.0 21.5
1.0 K135 10 50.4 21.5
1.5 K135 15 50.4 21.5
2.0 K135 20 63.9 21.5
2.5 K135 25 77.4 21.5
3.0 K135 30 90.9 21.5
4.0 K135 40 118.9 21.5

⁄” & ⁄”
1
2
3
4 1” to 4”

www.sfluk.co.uk
18
Biobore Ferrules
Domed End Cap Table DT-30
A Size (ins) Part Code A (mm)
0.5 DEC 05 38.1
0.75 DEC 07 38.1
1.0 DEC 10 38.1
1.5 DEC 15 38.1
2.0 DEC 20 38.1
2.5 DEC 25 38.1
3.0 DEC 30 44.5
4.0 DEC 40 50.8
6.0 DEC 60 63.5

Tank Ferrule - Heavy

Size (ins) Part Code A (mm) B (mm) C (mm) D (mm)
0.5 TF05H 25.0 51.0 3.60 9.5
0.75 TF07H 25.0 51.0 3.60 15.9
1.0 TF10H 50.4 63.5 6.35 22.2
1.5 TF15H 50.4 63.5 6.35 34.9
2.0 TF20H 63.9 76.2 6.35 47.6
2.5 TF25H 77.4 76.2 6.50 60.3
3.0 TF30H 90.9 101.6 6.35 73.0
4.0 TF40H 118.9 101.6 6.45 97.6
6.0 TF60H 166.9 101.6 6.50 146.9

1
⁄” & ⁄”
2
3
4 1” to 6”

K116 Blank Cap

Size (ins) Part Code A (mm) B (mm)
0.5 K116 05 25.0 4.8
0.75 K116 07 25.0 4.8
1.0 K116 10 50.4 6.3
1.5 K116 15 50.4 6.3
2.0 K116 20 63.9 6.3
2.5 K116 25 77.4 6.3
3.0 K116 30 90.9 6.3
4.0 K116 40 118.9 7.9
6.0 K116 60 166.9 11.1

⁄” & ⁄”
1
2
3
4 1” to 6”

K118 Hose Liner

Size (ins) Part Code A (mm) B (mm)
0.5 K118 05 25.0 38.1
0.75 K118 07 25.0 38.1
1.0 K118 10 50.4 101.6
1.5 K118 15 50.4 101.6
2.0 K118 20 63.9 101.6
2.5 K118 25 77.4 101.6
3.0 K118 30 90.9 101.6
4.0 K118 40 118.9 110.0

⁄” & ⁄”
1
2
3
4 1” to 4”

www.sfluk.co.uk
19
 Biobore Adapters
K204 Adapter Clamp/BSPT Male
Size (ins) Part Code A (mm)
0.5 K204 05 50.8
0.75 K204 07 50.8
1.0 K204 10 50.8
1.5 K204 15 60.3
2.0 K204 20 63.5
2.5 K204 25 70.0
3.0 K204 30 79.0
4.0 K204 40 90.0

K205 Adapter Clamp/BSPT Female

Size (ins) Part Code A (mm)
0.5 K205 05 44.0
0.75 K205 07 44.0
1.0 K205 10 44.0
1.5 K205 15 51.0
2.0 K205 20 52.5
2.5 K205 25 58.0
3.0 K205 30 65.0
4.0 K205 40 75.0

K214 Adapter Clamp/NPT Male

Size (ins) Part Code A (mm)
0.5 K214 05 50.8
0.75 K214 07 50.8
1.0 K214 10 50.8
1.5 K214 15 60.3
2.0 K214 20 63.5
2.5 K214 25 70.0
3.0 K214 30 79.0
4.0 K214 40 90.0

K215 Adapter Clamp/NPT Female

Size (ins) Part Code A (mm)
0.5 K215 05 44.0
0.75 K215 07 44.0
1.0 K215 10 44.0
1.5 K215 15 51.0
2.0 K215 20 52.5
2.5 K215 25 58.0
3.0 K215 30 65.0
4.0 K215 40 75.0

www.sfluk.co.uk
20
Biobore Adapters
N198 Adapter Tube/BSPT Male
Size (ins) Part Code A (mm)
0.5 N198 05 50.8
0.75 N198 07 50.8
1.0 N198 10 69.8
1.5 N198 15 69.8
2.0 N198 20 69.8
2.5 N198 25 69.8
3.0 N198 30 69.8
4.0 N198 40 69.8

N219 Adapter O/D Tube/N/B Pipe SCH 10*

Size (ins) Part Code A (mm)
0.5 N219 05 25.4
0.75 N219 07 25.4
1.0 N219 10 25.4
1.5 N219 15 38.1
2.0 N219 20 38.1
2.5 N219 25 38.1
3.0 N219 30 38.1
4.0 N219 40 50.8

* Other pipe schedules available on request

N191 Stub End

Size (ins) Part Code A (mm)
0.5 N191 05 50.8
0.75 N191 07 50.8
1.0 N191 10 69.8
1.5 N191 15 69.8
2.0 N191 20 69.8
2.5 N191 25 69.8
3.0 N191 30 69.8
4.0 N191 40 69.8

www.sfluk.co.uk
21
 Biobore Clamps
K750 Two Part Clamp Size (ins)
0.5-0.75
Size Code
07 01P
Pressure at 20°C PSI
600
Pressure at 120°C PSI
300
1.0-1.5 15 01P 500 250
2.0 20 01P 450 250
2.5 25 01P 400 200
3.0 30 01P 350 150
4.0 40 01P 200 125

Size (ins) Size Code A (mm) B (mm) C (mm)

A B 0.25 K7500701P 28.57 65 53
0.375 K7500701P 28.57 65 53
0.50 K7500701P 28.57 65 53
0.75 K7500701P 28.57 65 53
1.00 K7501501P 53.89 80 95
1.50 K7501501P 53.89 80 95
C 2.00 K7502001P 67.41 85 105
2.50 K7502501P 80.89 95 125
3.00 K7503001P 94.41 95 140
4.00 K7504001P 122.42 125 170
6.00 K7506001P 170.05 190 220

K752 Three Part Clamp

Size (ins) Size Code Pressure at 20°C PSI Pressure at 120°C PSI
1.0-1.5 15 01P 600 300
2.0 20 01P 550 275
2.5 25 01P 450 225
3.0 30 01P 350 160
4.0 40 01P 250 150
A B
Size (ins) Size Code A (mm) B (mm) C (mm)
1.00 K7521501P 53.89 85 85
1.50 K7521501P 53.89 85 85
2.00 K7522001P 67.41 90 95
C 2.50 K7522501P 80.89 100 105
3.00 K7523001P 94.41 110 125
4.00 K7524001P 122.42 140 155

K753 High Pressure Size (ins)

1.0-1.5
Size Code
15 01P
Pressure at 20°C PSI
1500
Pressure at 120°C PSI
1200

Bolted Clamp 2.0

2.5
20 01P
25 01P
1000
1000
800
800
3.0 30 01P 1000 800
4.0 40 01P 1000 800

Size (ins) Size Code A (mm) B (mm) C (mm)

1.00 K7531501P 51.96 80 105
1.50 K7531501P 51.96 80 105
2.00 K7532001P 66.29 95 115
2.50 K7532501P 78.99 105 130
A 3.00 K7533001P 92.45 115 145
B 4.00 K7534001P 120.49 135 175
6.00 K7536001P 168.45 180 225

NOTE: ONLY TYPE 1 RUBBER GASKETS SHOULD

C BE USED WITH THE K753 HIGH PRESSURE
BOLTED CLAMP. CONTACT STAINLESS FITTINGS
FOR OTHER OPTIONS.

www.sfluk.co.uk
22
Biobore Gaskets
K738 White Viton Gasket Type 1
Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K837 Nitrile Gasket Type 1

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K852 EPDM Gasket Type 1

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K839 Silicone Gasket Platinum Cured Type 1

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

www.sfluk.co.uk
23
 Biobore Gaskets
K829 Solid Teflon Gasket
Size (ins) Size Code
0.5 05 10G
0.75 07 10G
1.0 10 10G
1.5 15 10G
2.0 20 10G
2.5 25 10G
3.0 30 10G
4.0 40 10G

K831 Envelope Gasket Viton Inner

K828 Envelope Gasket EPDM Inner
Size (ins) Size Code
0.5 05 10G
0.75 07 10G
1.0 10 10G
1.5 15 10G
2.0 20 10G
2.5 25 10G
3.0 30 10G
4.0 40 10G

K737 White Viton Gasket Type 2

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K834 Black Viton Gasket Type 2

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

www.sfluk.co.uk
24
Biobore Gaskets
K830 Nitrile Gasket Type 2
Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K832 EPDM Gasket Type 2

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K835 White Silicone Gasket Type 2

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

Biobore Elastomer & Thermoplastic Characteristics

All materials are approved by: 3A, USDA, and comply with FDA’s Code of Federal Register – Title 21, Part 177.

Materials BUNA ‘U’ EPDM ‘E’ VITON ‘SFY’ SILICONE ‘X’ PTFE ‘G’ ENVELOPE ‘GR’
Code Steam Resistant
Temperature –50° to 100°C –50° to 150°C –30° to 180°C –60° to 230°C –40° to 230°C –40° to 230°C
Acid Good Good to Ex. Good to Ex. Poor to Good Good to Ex. Good to Ex.
Alkali Fair to Good Good to Ex. Poor to Good Poor to Fair Excellent Excellent
Fats/Oils Good to Ex. Poor Good to Ex. Poor to Good Excellent Excellent
Taste Good Good Good Good Excellent Excellent
Steam Resistance Fair Excellent Good to Ex. Excellent Fair Excellent
Odour Good Good Good Good Excellent Excellent
Abrasion Resistance Excellent Good Good Poor Fair Fair
Compression Set Good Fair Good to Ex. Good to Ex. Cold Flows Cold Flow
Depends on type of oil (Limited)
Colour Code Red Green Yellow & White Pink None None
PTFE GASKETS – LIMITED USE NOTE PTFE material. This limitation does not apply to 0.5” and 0.75” Tube OD fittings and
PSI Service Ratings for clamps DO NOT APPLY to 1” and above connections incorporating connections, due to the recessed, full-containment design of Fractional end connections.
PTFE gaskets. PTFE is virtually incompressible and tends to “cold flow” under normal operating
conditions. PTFE gaskets, when used with any standard clamp, are likely to leak at pressures ENVELOPE GASKETS
below the published service ratings. Consists of a PTFE outer jacket sandwiching a viton insert thus imparting some compressibility
To avoid possible leakage problems, we recommend consulting SFL before considering the use of together with the excellent heat and steam resistant properties.

www.sfluk.co.uk
25
 Biobore Gaskets
K186 Orifice Plate - Viton S/S
Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K772 Orifice Plate - Solid PTFE

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K747 Screen Disk - Viton

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

K773 Screen Mesh - Viton

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

www.sfluk.co.uk
26
Biobore Fabrications
Pre-fabrication of pipework can help you make considerable savings
in installation time and costs. Stainless Fittings has a great deal of
experience in this area, and can offer you help and advice in
determining the best design for the application.
By working directly from your isometric drawings or CAD disk,
sections can be pre-constructed using orbital welding techniques,
which are left as laid, and also manual, dressed and polished TIG
welds. This ensures that your processing environment remains pit
and crevice free, whilst reducing on-site welding requirements.
The complete section can be
delivered with a full Quality Dossier,
including weld maps, welder
qualifications and procedures, x-
rays and video recordings of welds,
thus assisting you with validation
procedures.
Fabricated Spool

SFL has extensive experience of building fabrications to tight

specifications. This fabrication requires pumps, valves and
tanks to be accommodated within the physical constraints of
the skid unit and pipework with an internal pit and crevice free
finish. SFL used its Biobore range of products to ensure that
this exacting requirement was met.

Skid Mounted Unit

Other Products
Pipework Supports
The lines must be adequately suppported to prevent strain on fittings, valves and
equipment connections. Proper supports are an important and integral part of
every piping system. The following general rules should be followed:
• Straight piping runs should be supported at least every ten feet.
• Supports should be used on each side of every valve, as close to the
connections as possible.
• There should be a support at each change of direction of the pipeline.
• Where pipelines pass through walls, floors or ceiling, clearance should be
provided around the pipe to allow it to move during expansion and
contraction.

www.sfluk.co.uk
27
 Stainless Fittings
Tipton Road, Dudley, West Midlands DY1 4SQ UK
Tel: + 44 (0)121 557 1188 • Fax: + 44 (0)121 557 6035
SALES HOTLINE: 0121 521 2020