19SWCG30204 1 200 R01GCK Kem Ir 300221 - 000
19SWCG30204 1 200 R01GCK Kem Ir 300221 - 000
19SWCG30204 1 200 R01GCK Kem Ir 300221 - 000
03
Saline Water Conversion Corporation
Page: 1 of 1
Signature Signature
Signature Signature
ANNEXURE TO IR - 300221
Total - 19 out of 179 nos
Valves,
API 609
Flanged,
double
SQ05.2-K-
offset ASME Flanged Electric
39 58 1 00GEK44 AA051 GRP3 DN100 4 Nx4/2-xx-9-
Butterfly 150# (FF) Actuator
F07
Valves,
API 609
01GEH09 AA054,
01GEH19 AA054,
01GEH29 AA054,
01GEH39 AA054,
01GEH49 AA054,
01GEH59 AA054,
01GEH69 AA054,
01GEH79 AA054, Flanged,
01GEH89 AA054, double
SQ05.2-K-
01GEH99 AA054, offset ASME Flanged Electric
12 17 20 GRP2 DN100 4 Nx4/2-xx-9-
02GEH09 AA054, Butterfly 150# (FF) Actuator
F07
02GEH19 AA054, Valves,
02GEH29 AA054, API 609
02GEH39 AA054,
02GEH49 AA054,
02GEH59 AA054,
02GEH69 AA054,
02GEH79 AA054,
02GEH89 AA054,
02GEH99 AA054
01GEJ18 AA051,
01GEJ28 AA051,
01GEJ38 AA051, Flanged,
01GEJ48 AA051, double
SQ07.2-K-
01GEJ58 AA051, offset ASME Flanged Electric
23 36 10 S31803 DN200 8 Nx4/2-xx-
02GEJ18 AA051, Butterfly 150# (RF) Actuator
25-F10
02GEJ28 AA051, Valves,
02GEJ38 AA051, API 609 2
02GEJ48 AA051,
02GEJ58 AA051
01GEJ10 AA051, Flanged,
01GEJ20 AA051, double SQ07.2-K-
ASME Flanged Electric
25 38 10 01GEJ30 AA051, S31803 offset DN200 8 Nx4/2-xx-
150# (RF) Actuator
01GEJ40 AA051, Butterfly 25-F10
01GEJ50 AA051 Valves,
ANNEXURE TO IR - 300221
Total - 19 out of 179 nos
02GEH37 AA051,
02GEH47 AA051,
02GEH57 AA051,
02GEH67 AA051,
02GEH77 AA051,
02GEH87 AA051,
02GEH97 AA051
Flanged,
double
SQ10.2-K-
00GEK49 AA051, offset ASME Flanged Electric
29 48 2 GRP3 DN350 14 Nx4/2-xx-
00GEK50 AA051 Butterfly 150# (FF) Actuator
50-F12
Valves,
API 609
Flanged,
double
SQ10.2-K-
00GEE18 AA051, offset ASME Flanged Electric
31 50 2 GRP3 DN350 14 Nx4/2-xx-
00GEE18 AA052 Butterfly 150# (FF) Actuator
50-F12
Valves,
API 609
01GEH07 AA053,
01GEH17 AA053,
01GEH27 AA053,
01GEH37 AA053,
01GEH47 AA053,
01GEH57 AA053,
01GEH67 AA053,
Flanged,
01GEH77 AA053,
double
01GEH87 AA053, SQ12.2-K-
offset ASME Flanged Electric
7 8 20 01GEH97 AA053, GRP1 DN350 14 Nx4/2-xx-
Butterfly 150# (FF) Actuator
02GEH07 AA053, 50-F14
Valves,
02GEH17 AA053,
API 609
02GEH27 AA053,
02GEH37 AA053,
02GEH47 AA053,
02GEH57 AA053,
02GEH67 AA053,
02GEH77 AA053,
02GEH87 AA053,
ANNEXURE TO IR - 300221
Total - 19 out of 179 nos
02GEH97 AA053
01GEH00 AA053,
01GEH10 AA053,
01GEH20 AA053,
01GEH30 AA053,
01GEH40 AA053,
01GEH50 AA053,
01GEH60 AA053,
01GEH70 AA053, Flanged,
01GEH80 AA053, double
SQ12.2-K-
01GEH90 AA053, offset ASME Flanged Electric
14 21 20 GRP1 DN350 14 Nx4/2-xx-
02GEH00 AA053, Butterfly 150# (FF) Actuator
50-F14
02GEH10 AA053, Valves,
02GEH20 AA053, API 609
02GEH30 AA053,
02GEH40 AA053,
02GEH50 AA053,
02GEH60 AA053,
02GEH70 AA053,
02GEH80 AA053,
02GEH90 AA053
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0535/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
Lock pin A240 316L S36813 190219-1085-00021012 DONG-A SPECIAL STEEL OR EQUIVALENT
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
1311 ÷ 1322 / 21 3.1 CERTIFICAZIONE ATTUATORI / actuators certificates -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 78 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 75 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 95 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1311.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1311.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1311.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1200.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1200.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1312.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1312.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1312.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1201.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1201.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1202.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1202.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
Digita qui il testo
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1313.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1203.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1203.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1315.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1315.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1315.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1204.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1204.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1316.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1316.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1316.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1205.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1205.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1317.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1317.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1317.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1206.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1206.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1318.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1318.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1318.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1207.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1207.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1319.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1319.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1319.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1208.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1208.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1320.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1320.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1320.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1209.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1209.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1321.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1321.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1321.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1210.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1210.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1322.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1322.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
09/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1322.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
09/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1211.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1211.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400470001÷A2048400470012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 05/07/2021 Hour: 8.00 Finish date:05/07/2021 Hour: 10.00
Air temperature: 19.8°C Relative humidity:50.2 % Dew Point: 9.1°C Steel temperature: 19.5°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 20°C 24.2°C 20.4°C - N/A
Air temperature 20.2°C 24.6°C 20.6°C - N/A
Relative humidity 48.1 % 40.1 % 53.6% - N/A
Dew Point 8.8 °C 10.1 °C 10.8°C - N/A
Application date 05/07/2021 06/07/2021 07/07/2021 - N/A
Application start hour 12.00 12.30 8.30 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 262/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 08/07/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0536/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
7 Lock pin A240 316L S36813 190219-1085-00021012 DONG-A SPECIAL STEEL OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
1323÷1334/21 3.1 CERTIFICAZIONE ATTUATORI / actuators certificates -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 95 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 78 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 75 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 85 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 18 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 22 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 12 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 18 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1323.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1323.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1323.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1226.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1226.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1324.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1324.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1324.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1227.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1227.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1325.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1325.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1325.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1228.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1228.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1326.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1326.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1326.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1229.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1229.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1327.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1327.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1327.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1230.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1230.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1328.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1328.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1328.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1231.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1231.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1329.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1329.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1329.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1232.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1232.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1330.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1330.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
12/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1330.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
12/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1233.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1233.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1331.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1331.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1331.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1234.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1234.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1332.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1332.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1332.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1235.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1235.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1333.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1333.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1333.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1236.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1236.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1334.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1334.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1334.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1237.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1237.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400500001÷A2048400500012- Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 10.00 Finish date:07/07/2021 Hour: 12.00
Air temperature: 23.1°C Relative humidity: 51.6 % Dew Point: 12.5°C Steel temperature: 29.9C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.6°C 21°C 22.5°C - N/A
Air temperature 23.8°C 21,2°C 22.8°C - N/A
Relative humidity 49.5 % 50.3 % 48.7 % - N/A
Dew Point 12.6°C 10.4°C 11.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 14.30 11.00 12.30 - N/A
Wet film thickness (W.F.T) 140-155 μm 185-200 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 80-90 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 10.8 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 263/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0512/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 180 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 145 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 192 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 204 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 216 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES x NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 185 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Dirito Andrea
DATE: DATE:
DATE: 12/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 154 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 191 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 30 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 122 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 35 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 38 Nm Nm Nm Satisfactory YES x NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 122 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 32 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 160 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 22 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 28 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 180 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 175 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 26 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 28 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES x NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 180 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Dirito Andrea
DATE: DATE:
DATE: 12/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 160 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 32 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 180 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 180 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 28 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F14-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35785
Motor serial number Valve number
Motor Seriennummer 1721NM71466 Ventilnummer 01GEH-17-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 430
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 461
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,1
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-17-AA053
Serial number
Seriennummer 1721NS35786
Motor serial number Valve number
Motor Seriennummer 1721NM71467 Ventilnummer 01GEH-27-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 440
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 478
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-27-AA053
Serial number
Seriennummer 1721NS35787
Motor serial number Valve number
Motor Seriennummer 1721NM71468 Ventilnummer 01GEH-37-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 431
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 393
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-37-AA053
Serial number
Seriennummer 1721NS35788
Motor serial number Valve number
Motor Seriennummer 1721NM71469 Ventilnummer 01GEH-47-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 418
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 402
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-47-AA053
Serial number
Seriennummer 1721NS35789
Motor serial number Valve number
Motor Seriennummer 1721NM71470 Ventilnummer 01GEH-57-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 503
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 453
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-57-AA053
Serial number
Seriennummer 1721NS35790
Motor serial number Valve number
Motor Seriennummer 1721NM71471 Ventilnummer 01GEH-67-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 428
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 400
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-67-AA053
Serial number
Seriennummer 1721NS35791
Motor serial number Valve number
Motor Seriennummer 1721NM71472 Ventilnummer 01GEH-77-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 428
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 437
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-77-AA053
Serial number
Seriennummer 1721NS35792
Motor serial number Valve number
Motor Seriennummer 1721NM71473 Ventilnummer 01GEH-87-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 441
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 447
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,2
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-87-AA053
Serial number
Seriennummer 1721NS35793
Motor serial number Valve number
Motor Seriennummer 1721NM71474 Ventilnummer 01GEH-97-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 451
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 431
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-97-AA053
Serial number
Seriennummer 1721NS35794
Motor serial number Valve number
Motor Seriennummer 1721NM71475 Ventilnummer 01GEH-07-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 462
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 435
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,6 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-07-AA053
Serial number
Seriennummer 1721NS35795
Motor serial number Valve number
Motor Seriennummer 1721NM71476 Ventilnummer 02GEH-17-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 472
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 431
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-17-AA053
Serial number
Seriennummer 1721NS35796
Motor serial number Valve number
Motor Seriennummer 1721NM71477 Ventilnummer 02GEH-27-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 410
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 395
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,8
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-27-AA053
Serial number
Seriennummer 1721NS35797
Motor serial number Valve number
Motor Seriennummer 1721NM71478 Ventilnummer 02GEH-37-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 433
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 413
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-37-AA053
Serial number
Seriennummer 1721NS35798
Motor serial number Valve number
Motor Seriennummer 1721NM71479 Ventilnummer 02GEH-47-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 441
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 447
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-47-AA053
Serial number
Seriennummer 1721NS35799
Motor serial number Valve number
Motor Seriennummer 1721NM71480 Ventilnummer 02GEH-57-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 462
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 413
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-57-AA053
Serial number
Seriennummer 1721NS35800
Motor serial number Valve number
Motor Seriennummer 1721NM71481 Ventilnummer 02GEH-67-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 440
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 364
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-67-AA053
Serial number
Seriennummer 1721NS35801
Motor serial number Valve number
Motor Seriennummer 1721NM71482 Ventilnummer 02GEH-77-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 485
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 462
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-77-AA053
Serial number
Seriennummer 1721NS35802
Motor serial number Valve number
Motor Seriennummer 1721NM71483 Ventilnummer 02GEH-87-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 415
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 407
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,2
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-87-AA053
Serial number
Seriennummer 1721NS35803
Motor serial number Valve number
Motor Seriennummer 1721NM71484 Ventilnummer 02GEH-97-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 451
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 431
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,1
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-97-AA053
Serial number
Seriennummer 1721NS35804
Motor serial number Valve number
Motor Seriennummer 1721NM71485 Ventilnummer 02GEH-07-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 430
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 409
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-07-AA053
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 12.05.2021 Prüfer i. A. Takacs, Lars
Quality assurance Date Inspector
Qualitätssicherung Datum 18.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35785 01GEH-17-AA053 01GEH-17-AA053
1721NS35786 01GEH-27-AA053 01GEH-27-AA053
1721NS35787 01GEH-37-AA053 01GEH-37-AA053
1721NS35788 01GEH-47-AA053 01GEH-47-AA053
1721NS35789 01GEH-57-AA053 01GEH-57-AA053
1721NS35790 01GEH-67-AA053 01GEH-67-AA053
1721NS35791 01GEH-77-AA053 01GEH-77-AA053
1721NS35792 01GEH-87-AA053 01GEH-87-AA053
1721NS35793 01GEH-97-AA053 01GEH-97-AA053
1721NS35794 01GEH-07-AA053 01GEH-07-AA053
1721NS35795 02GEH-17-AA053 02GEH-17-AA053
1721NS35796 02GEH-27-AA053 02GEH-27-AA053
1721NS35797 02GEH-37-AA053 02GEH-37-AA053
1721NS35798 02GEH-47-AA053 02GEH-47-AA053
1721NS35799 02GEH-57-AA053 02GEH-57-AA053
1721NS35800 02GEH-67-AA053 02GEH-67-AA053
1721NS35801 02GEH-77-AA053 02GEH-77-AA053
1721NS35802 02GEH-87-AA053 02GEH-87-AA053
1721NS35803 02GEH-97-AA053 02GEH-97-AA053
1721NS35804 02GEH-07-AA053 02GEH-07-AA053
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 18.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA11388
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35800 Ventilnummer 02GEH-67-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11389
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35789 Ventilnummer 01GEH-57-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11390
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35798 Ventilnummer 02GEH-47-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11391
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35799 Ventilnummer 02GEH-57-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11392
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35790 Ventilnummer 01GEH-67-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11393
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35803 Ventilnummer 02GEH-97-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11394
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35786 Ventilnummer 01GEH-27-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11395
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35788 Ventilnummer 01GEH-47-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11396
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35793 Ventilnummer 01GEH-97-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11397
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35791 Ventilnummer 01GEH-77-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11398
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35794 Ventilnummer 01GEH-07-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11399
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35795 Ventilnummer 02GEH-17-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11400
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35792 Ventilnummer 01GEH-87-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11401
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35796 Ventilnummer 02GEH-27-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11402
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35802 Ventilnummer 02GEH-87-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11403
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35801 Ventilnummer 02GEH-77-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11404
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35787 Ventilnummer 01GEH-37-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11405
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35804 Ventilnummer 02GEH-07-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11406
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35785 Ventilnummer 01GEH-17-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11407
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35797 Ventilnummer 02GEH-37-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 06.05.2021 Prüfer i. A. Appelt, Jörg
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 18.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient:
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100% N/A KV06.03.033.xx' data based (ERP) H
/
6.2 Visual inspection visual 100 % TBD3 KV06.03.033.xx1 data based (ERP)
7
Remarks: AUMA Quality Assurance
Internal documents are available for re iew only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. Butf we k Ralf
3to be determined between AUMA and customer, other ise not applicable
Final dient:
6.8 Test under load functional 100% TBD3 KV06.03.033.xx' data based (ERP)
6.10 Mechanical Position indicator visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
KV06.03.033.xx 1
6.15 Inspection before wet painting (if applicable) isual 100% N/A3 data based (ERP) H
painting specification2 /.
Remarks:
AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. Buttenweck, Ralf
3to be determined between AUMA and customer, otherwise not applicable
auma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 4 of 4
Final dient:
y
6.16 Final inspection visual 100% N/A3 KV06.03.033.xx1 data based (ERP) H
AV00.03.001 .xx1
6.17 Packing and document review isual 100% N/A3
packing specification
packing list H
Inspection release
7.0 Inspection release note (if applicable) review 100% 100% PO, PR requirements
note (IRN)
H
Seriennummer 1721 NS 35795 35796 35797 35798 35799 35800 35801 35802 35803 35804
Serial number
1
(D
•a
Kontrolle Farbauftrag /
Inspection of application 0 0 0 0 0 0 0 0 0 ....
0
s t
401 6
Min. =
/in
_>
/l1 & / s
13
S3
Max.
CL
/
Bemerkungen / Remarks Qualitätssicherung / Quality assurance
Datum Name
Date 1 7. Mai 2021 Name
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
Lock pin A240 316L S36813 190219-1085-00021012 DONG-A SPECIAL STEEL OR EQUIVALENT
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 155 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 165 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 18 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 135 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 135 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 125 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 165 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 122 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 140 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 130 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 18 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 115 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 144 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 122 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 105 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 130 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 06/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung TPA 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F12-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,02 Motor Leistung [kW] 0,02
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35765
Motor serial number Valve number
Motor Seriennummer 1721NM72533 Ventilnummer 01GEH-17-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 219
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 225
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-17-AA051
Serial number
Seriennummer 1721NS35766
Motor serial number Valve number
Motor Seriennummer 1721NM72534 Ventilnummer 01GEH-27-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 207
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 204
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-27-AA051
Serial number
Seriennummer 1721NS35767
Motor serial number Valve number
Motor Seriennummer 1721NM72535 Ventilnummer 01GEH-37-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 215
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 213
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-37-AA051
Serial number
Seriennummer 1721NS35768
Motor serial number Valve number
Motor Seriennummer 1721NM72536 Ventilnummer 01GEH-47-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 208
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 225
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 49,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-47-AA051
Serial number
Seriennummer 1721NS35769
Motor serial number Valve number
Motor Seriennummer 1721NM72537 Ventilnummer 01GEH-57-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 211
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 217
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-57-AA051
Serial number
Seriennummer 1721NS35770
Motor serial number Valve number
Motor Seriennummer 1721NM72538 Ventilnummer 01GEH-67-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 204
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 234
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 49,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-67-AA051
Serial number
Seriennummer 1721NS35771
Motor serial number Valve number
Motor Seriennummer 1721NM72539 Ventilnummer 01GEH-77-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 211
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 209
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-77-AA051
Serial number
Seriennummer 1721NS35772
Motor serial number Valve number
Motor Seriennummer 1721NM72540 Ventilnummer 01GEH-87-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 223
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 234
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,3 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-87-AA051
Serial number
Seriennummer 1721NS35773
Motor serial number Valve number
Motor Seriennummer 1721NM72541 Ventilnummer 01GEH-97-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 204
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 220
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,0
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-97-AA051
Serial number
Seriennummer 1721NS35774
Motor serial number Valve number
Motor Seriennummer 1721NM72542 Ventilnummer 01GEH-07-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 202
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 210
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,0
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-07-AA051
Serial number
Seriennummer 1721NS35775
Motor serial number Valve number
Motor Seriennummer 1721NM72543 Ventilnummer 02GEH-17-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 201
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 222
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-17-AA051
Serial number
Seriennummer 1721NS35776
Motor serial number Valve number
Motor Seriennummer 1721NM72544 Ventilnummer 02GEH-27-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 212
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 211
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 49,8
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,0
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-27-AA051
Serial number
Seriennummer 1721NS35777
Motor serial number Valve number
Motor Seriennummer 1721NM72545 Ventilnummer 02GEH-37-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 232
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 234
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,3 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-37-AA051
Serial number
Seriennummer 1721NS35778
Motor serial number Valve number
Motor Seriennummer 1721NM72546 Ventilnummer 02GEH-47-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 207
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 218
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 51,0
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,1
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-47-AA051
Serial number
Seriennummer 1721NS35779
Motor serial number Valve number
Motor Seriennummer 1721NM72547 Ventilnummer 02GEH-57-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 220
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 215
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 52,1
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-57-AA051
Serial number
Seriennummer 1721NS35780
Motor serial number Valve number
Motor Seriennummer 1721NM72548 Ventilnummer 02GEH-67-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 216
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 224
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 51,0
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-67-AA051
Serial number
Seriennummer 1721NS35781
Motor serial number Valve number
Motor Seriennummer 1721NM72549 Ventilnummer 02GEH-77-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 224
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 199
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,1
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,1
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-77-AA051
Serial number
Seriennummer 1721NS35782
Motor serial number Valve number
Motor Seriennummer 1721NM72550 Ventilnummer 02GEH-87-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 212
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 214
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,2
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-87-AA051
Serial number
Seriennummer 1721NS35783
Motor serial number Valve number
Motor Seriennummer 1721NM72552 Ventilnummer 02GEH-97-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 215
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 215
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,0
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-97-AA051
Serial number
Seriennummer 1721NS35784
Motor serial number Valve number
Motor Seriennummer 1721NM72551 Ventilnummer 02GEH-07-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 200
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 227
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 49,9
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,2
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-07-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 17.06.2021 Prüfer i. A. Lillin, Franz
Quality assurance Date Inspector
Qualitätssicherung Datum 24.06.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35765 01GEH-17-AA051 01GEH-17-AA051
1721NS35766 01GEH-27-AA051 01GEH-27-AA051
1721NS35767 01GEH-37-AA051 01GEH-37-AA051
1721NS35768 01GEH-47-AA051 01GEH-47-AA051
1721NS35769 01GEH-57-AA051 01GEH-57-AA051
1721NS35770 01GEH-67-AA051 01GEH-67-AA051
1721NS35771 01GEH-77-AA051 01GEH-77-AA051
1721NS35772 01GEH-87-AA051 01GEH-87-AA051
1721NS35773 01GEH-97-AA051 01GEH-97-AA051
1721NS35774 01GEH-07-AA051 01GEH-07-AA051
1721NS35775 02GEH-17-AA051 02GEH-17-AA051
1721NS35776 02GEH-27-AA051 02GEH-27-AA051
1721NS35777 02GEH-37-AA051 02GEH-37-AA051
1721NS35778 02GEH-47-AA051 02GEH-47-AA051
1721NS35779 02GEH-57-AA051 02GEH-57-AA051
1721NS35780 02GEH-67-AA051 02GEH-67-AA051
1721NS35781 02GEH-77-AA051 02GEH-77-AA051
1721NS35782 02GEH-87-AA051 02GEH-87-AA051
1721NS35783 02GEH-97-AA051 02GEH-97-AA051
1721NS35784 02GEH-07-AA051 02GEH-07-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 24.06.2021 i. A. Butterweck
Serial number
Seriennummer 1921MA13965
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35782 Ventilnummer 02GEH-87-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13966
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35769 Ventilnummer 01GEH-57-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13967
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35784 Ventilnummer 02GEH-07-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13968
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35780 Ventilnummer 02GEH-67-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13969
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35778 Ventilnummer 02GEH-47-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13970
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35772 Ventilnummer 01GEH-87-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13971
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35770 Ventilnummer 01GEH-67-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13972
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35766 Ventilnummer 01GEH-27-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13973
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35767 Ventilnummer 01GEH-37-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13974
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35779 Ventilnummer 02GEH-57-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13975
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35771 Ventilnummer 01GEH-77-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13976
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35775 Ventilnummer 02GEH-17-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13977
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35773 Ventilnummer 01GEH-97-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13978
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35776 Ventilnummer 02GEH-27-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13979
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35768 Ventilnummer 01GEH-47-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13980
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35781 Ventilnummer 02GEH-77-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13981
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35783 Ventilnummer 02GEH-97-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13982
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35777 Ventilnummer 02GEH-37-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13983
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35765 Ventilnummer 01GEH-17-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13984
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35774 Ventilnummer 01GEH-07-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 17.05.2021 Prüfer i. A. Burgert, Kevin
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 24.06.2021 Abnahmebeauftragter i. A. Dirk Stabenow
Final dient:
Safety test
N/A data based (ERP)
5.2 functional 100 % KV09.03.003.xx1 H
(protective earthing and high voltage test) inspection certificate
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100 % N/A KV06.03.033.xx1 data based (ERP) H TjlWf
6.2 Visual inspection visual 100 % TBD3 KV06.03.033.xx1 data based (ERP)
auma®
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.8 Test under load functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100 % N/A3 KV06.03.033.xx1 data based (ERP) H
KV06.03.033.xx 1
6.15 Inspection before wet painting (if applicable) visual 100 % N/A3
painting specification2
data based (ERP)
v. /
Remarks: AUMA Quality Assurance
Internal documents are available for review only at AU A locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 23.06.2021 Signature i.A. Köhler, Hartmut
3to be determined between AUMA and customer, other ise not applicable
auma®
AUMA Riester GmbH & Co.KG Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 4 of 4
Final dient:
6.16 Final inspection isual 100% N/A3 KV06.03.033.xx1 data based (ERP) H
AV00.03.001.xx1
6.17 Packing and document review isual 100 % N/A3 packing list H
JTW
packing specification
Inspection release
7.0 Inspection release note (if applicable) review 100 % 100 % PO, PR requirements H
note (IRN)
auma®
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
Kontrollblatt - Korrosionsschutz für Stellantriebe und Getriebe für / for LV PI.001.02
Control sheet - corrosion protection for actuators and gearboxes Blatt / page 2 von / of 2
Auftrag von Bestellnummer Projekt
Order from AUMA Italiana s.r.l. PO number I 44256#06 Project ALJUBAILSWRO
Auftragsnummer Typ Stück
Order number 23°94979 SQ 10.2 20
Type Quantity
Oberflächenvorbereitung /
Grundierung / Primer coating Decklack / Finish coating Pulverschicht / Powder coating
Surface preparation
Abteilung / A0001
Department
COA1 RAL
CD
¦O
Kontrolle Farbauftrag /
Inspection of application 0 0 0 0 0 0 0 0 0 0
c- E
£ 3-
CD
c
Min. =
60 m 7- 7 77
:hicht / Po\ coating y UJ
Cß
-o O ?
CD
/ i
> H S >2
=3
Q-
I
Max.
t 25 yii!> 3
Bemerkungen / Remarks Qualitätssicherung / Quality assurance
Datum Name
Date Name
lliMk
AUMA Riester GmbH & Co. KG
P. O. Box 1362 • 79379 Müllheim auma Ausgabe/Zssue 1.18
Y005.646/001
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0537/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
1309 3.1 CERTIFICAZIONE ATTUATORI / actuators certificates -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 30 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 13/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1309.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1309.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1309.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1242.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1242.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400520001, A2048400530001- Qty 2
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 8.00 Finish date:07/07/2021 Hour: 10.00
Air temperature: 22.9°C Relative humidity: 52.6 % Dew Point: 12.7°C Steel temperature: 22.6°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.5°C 20.8°C 21.5°C - N/A
Air temperature 23.7°C 21°C 21.7°C - N/A
Relative humidity 50.1 % 50.7 % 63.4 % - N/A
Dew Point 12.7°C 10.3°C 14.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 12.30 10.00 10.00 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 11 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 259/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0538/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
1310/21 3.1 CERTIFICAZIONE ATTUATORI / actuators certificates -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: N 237 Nm Nm 85 Nm Nm Nm For lever operated valve:
Max allowable running: N 83 Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N 237 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 13/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1310.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1310.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
13/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1310.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
13/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1243.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova OK
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1243.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D.M.C. di D’ASSISI GIUSEPPE
VALVITALIA ACTUATORS
A2048400520001, A2048400530001- Qty 2
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date: 07/07/2021 Hour: 8.00 Finish date:07/07/2021 Hour: 10.00
Air temperature: 22.9°C Relative humidity: 52.6 % Dew Point: 12.7°C Steel temperature: 22.6°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 23.5°C 20.8°C 21.5°C - N/A
Air temperature 23.7°C 21°C 21.7°C - N/A
Relative humidity 50.1 % 50.7 % 63.4 % - N/A
Dew Point 12.7°C 10.3°C 14.4°C - N/A
Application date 07/07/2021 08/07/2021 09/07/2021 - N/A
Application start hour 12.30 10.00 10.00 - N/A
Wet film thickness (W.F.T) 145-165 μm 180-195 μm 145-165 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 135-145μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):305-335 μm
Chlorides on surface (ISO 8502-6/9): 11 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 259/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 12/07/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0509/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 125 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 35 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 40 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 150 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 175 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 120 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 35 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 30 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 182 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 354
Nm Nm Nm 175 Nm Nm Nm For lever operated valve:
124
Max allowable running: Nm Nm Nm 32 Nm Nm Nm Lever length (m)
Max allowable ETC: 354
Nm Nm Nm 35 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 22/06/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1279.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1279.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1279.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1186.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1186.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1280.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1280.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1280.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1187.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1187.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1281.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1281.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1281.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1188.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1188.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1282.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1282.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1282.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1189.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1189.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1283.21
Multimeter / Multimetro OK
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1283.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1283.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1190.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1190.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1284.21
Multimeter / Multimetro OK
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1284.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
OK
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm] OK
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1284.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
07/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1191.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1191.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0510/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
1285-1286-1287-1288-1289-1290/21 3.1 CERTIFICAZIONE ATTUATORI / actuators certificates -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
Certified by …..
into service MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SID
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 184 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 35 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 30 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 170 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 30 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 30 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 165 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 25 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 28 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 155 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 22 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 150 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 7,5 bar 7,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 354 Nm Nm 165 Nm Nm Nm For lever operated valve:
Max allowable running: N 124 Nm Nm 40 Nm Nm Nm Lever length (m)
Max allowable ETC: N 354 Nm Nm 45 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 24/06/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
EN 10204 3.1
Certificato N°. / Certificato N°. :1285.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1285.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1285.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1194.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1194.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1286.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1286.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1286.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
07/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1195.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1195.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1287.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
4 bar
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
07/07/2021
MAGISTRI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1287.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.17.a - Stroking time for open Pressure test: 4[barg] ≤ 36 [Sec.] 10 [Sec.] 10 [Sec.] ok
1.17.b - Stroking time for close Pressure test: Spring ≤ 36 [Sec.] 19 [Sec.] 19 [Sec.] ok
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
07/07/2021
MAGISTRI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1287.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
07/07/2021
MAGISTRI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1196.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1196.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1288.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1288.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
06/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1288.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
06/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1197.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1197.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1289.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta OK
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
OK
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1289.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
ok
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
07/07/2021
NERVETTI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1289.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
07/07/2021
NERVETTI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1198.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1198.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1290.21
Multimeter / Multimetro
1.02 - Visual, dimensional and nameplate check / Controllo visivo, dimensionale e targhetta
1.03 NAS Test (Where applicable) / NAS Test (Dove applicabile) N/A
1.04 - Pneumatic circuit pressure test / Prova in pressione del circuito pneumatico
1.05 - Hydraulic circuit pressure test / Prova in pressione del circuito idraulico
1.08 - Actuator funcional test / Verifica del funzionamento attuatore (As per procedure test / in accordo alla procedura di collaudo) OK
1.09 - Press. regulator setting A / Taratura regolatore di pressione A
4 bar
4[barg]
1.10 - Press. regulator setting B / Taratura regolatore di pressione B N/A
07/07/2021
MAGISTRI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1290.21
Results /
1.16 - Functional test with storage tank / Test funzionale con serbatoio di accumulo
Risultato
N° Stroke/ N°
Manovre
Initial pressure / Pressione iniziale [bar] Final pressure/ Prssione finale [bar] N/A
1.17 - Operating times check and setting / Verifica tempi di manovra e Reference Value Obtained Value Setting value
settaggio Valore riferimento Valore ottenuto Valore di settaggio
1.17.a - Stroking time for open Pressure test: 4[barg] ≤ 36 [Sec.] 10 [Sec.] 10 [Sec.] OK
1.17.b - Stroking time for close Pressure test: Spring ≤ 36 [Sec.] 19 [Sec.] 19 [Sec.] OK
1.18 - Turn actuator's torque measurment / Verifica delle coppie rese dall'attuatore
Pressure test bto 0° [Nm] rto 45° [Nm] eto 90° [Nm] btc 90° [Nm] rtc 45° [Nm] etc 0° [Nm]
Components / Componenti Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
POSITIONER / Posizionatore
VESSEL
Serbatoio
VESSEL
Serbatoio
VESSEL
Serbatoio
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
RELIEF VALVE
Valvola di sicurezza
07/07/2021
MAGISTRI
ACTUATOR TEST CERTIFICATE - CERTIFICATO DI PROVA ATTUATORE
EN 10204 3.1
Certificato N°. / Certificato N°. :1290.21
COMPONENT / COMPONENTI Supplier / Fornitore Certification / Certificazione Serial number/ Numero di serie
Results /
ADDITIONAL TEST / TEST AGGIUNTIVI
Risultato
OK
OK
OK
07/07/2021
MAGISTRI
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1199.21
Result /
1 CYLINDER TEST / TEST CILINDRO
Risultato
1.1 - Test equipment verifcation / Verifica apparecchiature di prova
PALL PCM 30
1.3 - NAS Test (Where applicable) / NAS test (dove applicabile) N/A
1.6 - Head flange and piston pressure test / Prova pressione della flangia di testa e del pistone
1.7 - End flange and piston pressure test / Prova pressione della flangia di coda e del pistone
NAPELLI 31/05/2021
CYLINDER TEST CERTIFICATE - CERTIFICATO DI PROVA CILINDRO
EN 10204 3.1
Certificato N°. / Certificato N°. :1199.21
NAPELLI 31/05/2021
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 1 / 4
Date: 04.11.2016
(A01) (A08.1)
(A08.2)
Suborder 85230603
(A06.1) (A07.1)
16
0769-CPR-VAS-00484-1
The works operate a Quality Management System according to European Pressure Equipment Directive (PED) 2014/68/EU Annex I Par. 4.3
(Certificate 07-202-1410-WP-1135/14 issued by TÜV NORD valid until July 31-2017)
(B03)
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 2 / 4
Date: 04.11.2016
(C71)
Heat Process C Si Mn P S Al Cu Cr Ni Mo
% % % % % % % % % %
min - - - 0.90 - - 0.020 - - - -
max - 0.200 0.500 1.60 0.025 0.0200 - 0.300 0.300 0.500 0.080
320117 Oxygen (BOF) 0.160 0.200 1.28 0.014 0.0020 0.028 0.010 0.030 0.020 0.010
(B07.1)
Heat V Ti Nb(Cb) N CQ 03 EF 02 EF 28
% % % % % % %
min - - - - - - -
max 0.100 0.040 0.050 0.0120 .47 0.12 0.45
AL >= 2 X N
Approved by CFERMI on 07/11/16
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 3 / 4
Date: 04.11.2016
(D55)
(A04, B06)
MARKING, IDENTIFICATION
CONTINUOUSLY PAINT STENCILED MILL REFERENCE ORDER NO.
Approved by CFERMI on 07/11/16
(Z01)
The supplied products are in compliance with the requirements of the order
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
Vallourec Deutschland GmbH (A01) INSPECTION CERTIFICATE (A02)
Page: 4 / 4
Date: 04.11.2016
Date 04.11.2016
Validated by Inspection Representative
DOGAN
+49(0)2119603852
+49(0)2119602216
@ CERTIFICATES-RS-
PLUG@VALLOUREC.COM
Stamp
This testimonial and certification respectively may neither be modified nor used for other products. Offences are regarded as falsification of documents and will be subject to criminal prosecution.
26/10/2020
SIDERPIGHI SPA - THIS DOCUMENT IS REPRODUCED BY A COMPUTERIZED SYSTEM AND IS CONFORM TO THE ORIGINAL
15/02/2021
15/02/2021
16/03/2021
16/03/202
1
16/03/2021
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo Ni P S Si
1 L17032473 0,3600 0,8100 0,7000 0,1800 0,7500 0,0150 0,0230 0,3100
2 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
3 3110020554 0,4500 0,6300 0,0400 0,0500 0,2300 ASME II Part A ed. 2019
4 57735 0,4500 0,7300 0,0300 0,0210 0,2000 ASME II Part A ed. 2019
5 79144 0,4300 0,7100 0,0130 0,0260 0,2100 ASME II Part A ed. 2019
6 18303360-4 0,4400 0,6900 0,0180 0,0070 0,2000 ASME II Part A ed. 2019
0,4100 0,9300 0,7600 0,2200 0,0110 0,0040 0,2600 ASME II Part A ed. 2019
7 1759
0,4350 1,0900 0,7700 0,1800 0,0110 0,0240 0,2100 ASME II Part A ed. 2019
8 BA7559
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
1 Positivo / Positive
2 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
3 Quenched and tempered macro etch examination: positive 455° 24h 540 246 Positive Proof load positive Positivo / Positive
4 Quenched and tempered macro etch examination: positive 455° 24h 540 275 Positive Proof load positive Positivo / Positive
5 Quenched and tempered macro etch examination: positive 455° 24h 540 281 Positive Proof load positive Positivo / Positive
6 Quenched and tempered macro etch examination: positive 455° 24h 540 260 Positive Proof load positive Positivo / Positive
7 Quenched and tempered macro etch examination: positive 620° 24h 590 159 190 Positive proof load positive Positivo / Positive
8 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
CERTIFICATO DI COLLAUDO EN 10204 Azienda CERTIFICATA - UNI EN ISO 9001:2015
COLATA-ANALISI CHIMICA come da certificato di acciaieria / HEAT-CHEMICAL ANALYSIS according to mill certificate NORME/STANDARDS
Item Colata/Heat C Cr Mn Mo P S Si
9 214012 0,4200 0,9800 0,8200 0,1600 0,0150 0,0120 0,2300 ASME II Part A ed. 2019
10 542263 0,4000 1,1000 0,9000 0,1900 0,0230 0,0250 0,2300 ASME II Part A ed. 2019
11 BD7607 0,4350 1,0100 0,8200 0,1600 0,0080 0,0250 0,2200 ASME II Part A ed. 2019
12 BA1704 0,4200 1,0700 0,8000 0,2100 0,0100 0,0060 0,2400 ASME II Part A ed. 2019
13 3080800 0,4210 1,0080 0,7720 0,1730 0,0080 0,0220 0,2060 ASME II Part A ed. 2019
13 988 869 19,90 57,20 286 289 -101 860 725 16 50 321 27 -101
Trattamento Termico Dur./Hard. HB dadi/nuts Prova allarg. per dadi ESAME VISIVO-VIS.EXAM
Item Tempering - °C h °C >= HB Cone stripping on nuts
9 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
10 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
11 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
12 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
13 Quenched and tempered macro etch examination: positive 593° Positivo / Positive
Note:
Certifichiamo che i materiali sono stati fabbricati, campionati, testati e ispezionati in conformità alle specifiche e conformi alle prescrizioni degli ordini.
We certify that the fasteners were manufactured, sampled, tested and inspected in accordance with the specification and are consistent with order prescriptions.
Oscar Uboldi - Quality Assurance
D .M . C . d i D ’A S S I S I G I U S E P P E
V ia M e u c c i,1 5 T e l . 3 3 9 4 0- 7 1 7 6 3
2 7 0 5 5 - R iv a n a zz a n o ( P a v ia ) F a x 0 3 8 3 - 9- 3 3 7 0 0
P a rt i t a I v a 0 1 9 4 9 6 8 0 1 8 3
VALVITALIA ACTUATORS
A2048400010001÷A2048400010006, A2048400020001÷A2048400020006 - Qty 12
SURFACE PREPARATION
Blasting standard : ISO 8501-1 Sa 2 ½
Grit Type : Gh25
Cleanliness : ISO 8501-3 Grade P2
Start date:04/06/2021 Hour: 8.00 Finish date: 04/06/2021 Hour: 10.00
Air temperature: 20.3°C Relative humidity: 54,6 % Dew Point: 10.8°C Steel temperature: 19.9°C
COATING APPLICATION
Coat No. Coating Brand Name Colour Req. d DFT
1st CARBOZINC 858 GREEN 75 μm
2nd CARBOMASTIC 15 LT ALUMINIUM 130 μm
3rd CARBOTHANE 134 HP RAL 7035 75 μm
Equipment Description:
1st 2nd 3rd - Notes
Steel temperature 21.1°C 21°C 20.5°C - N/A
Air temperature 21.5°C 21.6°C 20.9°C - N/A
Relative humidity 49.8 % 51.8 % 52.5 % - N/A
Dew Point 10.5°C 11.1°C 10.7°C - N/A
Application date 04/06/2021 07/06/2021 08/06/2021 - N/A
Application start hour 12.00 11.30 11.30 - N/A
Wet film thickness (W.F.T) 146-163 μm 187-201 μm 146-163 μm - N/A
Dry film thickness (D.F.T.) 85-95 μm 140-150μm 85-95 μm - N/A
TEST RESULTS
Surface Roughness: (ISO 8503-5) 50-85 μm Total Dry Film Thickness (SSPC-PA2):310-340 μm
Chlorides on surface (ISO 8502-6/9): 10,5 mg/m2 Visual appearance /Colour: Conforming ok
Adhesion test : (ISO 4624): 205/21 Blotter test (according to ASTM D4285): conforming ok
Dust level: (ISO 8502-3): Level 2
FINAL RESULT: X Conform Non-Conform Non-Conformity
D. M. C Client. Third Part:
Name: D’ Assisi Giuseppe
Sign.:
Date: 09/06/2021
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0514/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
2 Disc A890 CD3MN TC87 10041511 TAE CHANG PRECISION CO., LTD. -
Seat retainer UNS S31803 61471 2015-116826 KUK DONG STAINLESS CO.,LTD -
OR
Bolt A193 B8M S40045 DK20210223-04 DAEKANG BOLT&NUT EQIVALENT
Lock pin UNS S31803 N01655 30226-2076 DONG-A SPECIAL STEEL -
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 12 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 6 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 6 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 7 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 9 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 6 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 6 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 4 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 4 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 9 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 6 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 6 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 8 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 7 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 11 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 4 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 7 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 4 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 4 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 07/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 1 bar 1 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 12 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 7 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME Andrea Gerardi DYNAMOMETRIC KEY ID C1004 / C740
Satisfactory X internal X TEST BENCH ID It 1047 NORBAR ID
REMARKS:
Gerardi
DATE: DATE:
DATE: 08/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F05-F07-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ VD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35571
Motor serial number Valve number
Motor Seriennummer 1721NM71028 Ventilnummer 01GEH-19-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 63
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 60
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-19-AA054
Serial number
Seriennummer 1721NS35572
Motor serial number Valve number
Motor Seriennummer 1721NM71027 Ventilnummer 01GEH-29-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 57
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-29-AA054
Serial number
Seriennummer 1721NS35573
Motor serial number Valve number
Motor Seriennummer 1721NM71026 Ventilnummer 01GEH-39-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 60
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-39-AA054
Serial number
Seriennummer 1721NS35574
Motor serial number Valve number
Motor Seriennummer 1721NM71025 Ventilnummer 01GEH-49-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 59
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-49-AA054
Serial number
Seriennummer 1721NS35575
Motor serial number Valve number
Motor Seriennummer 1721NM71024 Ventilnummer 01GEH-59-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 58
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 57
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-59-AA054
Serial number
Seriennummer 1721NS35576
Motor serial number Valve number
Motor Seriennummer 1721NM71023 Ventilnummer 01GEH-69-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 64
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-69-AA054
Serial number
Seriennummer 1721NS35577
Motor serial number Valve number
Motor Seriennummer 1721NM71022 Ventilnummer 01GEH-79-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 57
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 60
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-79-AA054
Serial number
Seriennummer 1721NS35578
Motor serial number Valve number
Motor Seriennummer 1721NM71021 Ventilnummer 01GEH-89-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 56
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 59
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-89-AA054
Serial number
Seriennummer 1721NS35579
Motor serial number Valve number
Motor Seriennummer 1721NM71020 Ventilnummer 01GEH-99-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 57
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 64
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-99-AA054
Serial number
Seriennummer 1721NS35580
Motor serial number Valve number
Motor Seriennummer 1721NM71019 Ventilnummer 01GEH-09-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 64
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 59
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-09-AA054
Serial number
Seriennummer 1721NS35581
Motor serial number Valve number
Motor Seriennummer 1721NM71018 Ventilnummer 02GEH-19-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 63
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-19-AA054
Serial number
Seriennummer 1721NS35582
Motor serial number Valve number
Motor Seriennummer 1721NM71017 Ventilnummer 02GEH-29-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 63
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 53
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-29-AA054
Serial number
Seriennummer 1721NS35583
Motor serial number Valve number
Motor Seriennummer 1721NM71016 Ventilnummer 02GEH-39-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 63
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 58
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-39-AA054
Serial number
Seriennummer 1721NS35584
Motor serial number Valve number
Motor Seriennummer 1721NM71015 Ventilnummer 02GEH-49-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 61
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 63
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-49-AA054
Serial number
Seriennummer 1721NS35585
Motor serial number Valve number
Motor Seriennummer 1721NM71014 Ventilnummer 02GEH-59-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 61
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-59-AA054
Serial number
Seriennummer 1721NS35586
Motor serial number Valve number
Motor Seriennummer 1721NM71013 Ventilnummer 02GEH-69-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 65
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 63
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] nicht vorhanden
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-69-AA054
Serial number
Seriennummer 1721NS35587
Motor serial number Valve number
Motor Seriennummer 1721NM71012 Ventilnummer 02GEH-79-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 58
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 64
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-79-AA054
Serial number
Seriennummer 1721NS35588
Motor serial number Valve number
Motor Seriennummer 1721NM71011 Ventilnummer 02GEH-89-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 57
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,2
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-89-AA054
Serial number
Seriennummer 1721NS35589
Motor serial number Valve number
Motor Seriennummer 1721NM71010 Ventilnummer 02GEH-99-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 65
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,2
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-99-AA054
Serial number
Seriennummer 1721NS35590
Motor serial number Valve number
Motor Seriennummer 1721NM71009 Ventilnummer 02GEH-09-AA054
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 64
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-09-AA054
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 11.05.2021 Prüfer i. A. Nagl, Leo
Quality assurance Date Inspector
Qualitätssicherung Datum 17.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35571 01GEH-19-AA054 01GEH-19-AA054
1721NS35572 01GEH-29-AA054 01GEH-29-AA054
1721NS35573 01GEH-39-AA054 01GEH-39-AA054
1721NS35574 01GEH-49-AA054 01GEH-49-AA054
1721NS35575 01GEH-59-AA054 01GEH-59-AA054
1721NS35576 01GEH-69-AA054 01GEH-69-AA054
1721NS35577 01GEH-79-AA054 01GEH-79-AA054
1721NS35578 01GEH-89-AA054 01GEH-89-AA054
1721NS35579 01GEH-99-AA054 01GEH-99-AA054
1721NS35580 01GEH-09-AA054 01GEH-09-AA054
1721NS35581 02GEH-19-AA054 02GEH-19-AA054
1721NS35582 02GEH-29-AA054 02GEH-29-AA054
1721NS35583 02GEH-39-AA054 02GEH-39-AA054
1721NS35584 02GEH-49-AA054 02GEH-49-AA054
1721NS35585 02GEH-59-AA054 02GEH-59-AA054
1721NS35586 02GEH-69-AA054 02GEH-69-AA054
1721NS35587 02GEH-79-AA054 02GEH-79-AA054
1721NS35588 02GEH-89-AA054 02GEH-89-AA054
1721NS35589 02GEH-99-AA054 02GEH-99-AA054
1721NS35590 02GEH-09-AA054 02GEH-09-AA054
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 17.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA10869
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35575 Ventilnummer 01GEH-59-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10870
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35580 Ventilnummer 01GEH-09-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10871
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35582 Ventilnummer 02GEH-29-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10872
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35572 Ventilnummer 01GEH-29-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10873
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35584 Ventilnummer 02GEH-49-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10874
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35589 Ventilnummer 02GEH-99-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10875
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35574 Ventilnummer 01GEH-49-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10876
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35577 Ventilnummer 01GEH-79-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10877
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35571 Ventilnummer 01GEH-19-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10878
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35587 Ventilnummer 02GEH-79-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10879
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35573 Ventilnummer 01GEH-39-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10880
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35581 Ventilnummer 02GEH-19-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10881
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35578 Ventilnummer 01GEH-89-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10882
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35579 Ventilnummer 01GEH-99-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10883
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35586 Ventilnummer 02GEH-69-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10884
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35590 Ventilnummer 02GEH-09-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10885
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35588 Ventilnummer 02GEH-89-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10886
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35576 Ventilnummer 01GEH-69-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10887
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35585 Ventilnummer 02GEH-59-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA10888
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35583 Ventilnummer 02GEH-39-AA054
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 05.05.2021 Prüfer i. A. Otto, Dominik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 17.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient:
5.2
Safety test
functional 100% N/A KV09.03.003.xx1
data based (ERP) H
(protective earthing and high voltage test) inspection certificate
auma
AUMA Riester GmbH & Co.KG
Y006.733
7
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100% N/A KV06.03.033.xx1 data based (ERP) H
6.2 Visual inspection isual 100% TBD3 KV06.03.033.xx1 data based (ERP) /
data based (ERP)
6.3 Protective earthing test functional 100% TBD3 KV06.03.033.xx1
inspection certificate
Remarks:
AUMA Quality Assurance /7
Internal documents are a ailable for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. Ör Ral
3to be determined between AUMA and customer, other ise not applicable
aoma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9 / Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.8 Test under load functional 100% TBD3 Kvoe.os.oas.xx' data based (ERP)
6.10 Mechanical position indicator visual 100 % TBD3 Kvoe.oa.oss.xx' data based (ERP)
6.11 Checking handwheel acti ation functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100 % TBD3 KVOG.OS.OSS.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100 % N/A3 KV06.03.033.xx1 data based (ERP) H
N/A3 KV06.03.033.xx 1
100% data based (ERP)
6.15 Inspection betöre wet painting (if applicable) isual
painting specification2
•H
fl/ -
Remarks:
AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.5.2021 Signature i.A. ßgtten ck, alf
*
3to be determined between AUMA and customer, otherwise not applicable
auma@
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
7
Remarks: AUMA Quality Assurance
Internal documents are available for re iew only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.05.2021 Signatare i.A. tterweck S alf
3to be determined between AUMA and customer, otherwise not applicable
Seriennummer 1721 NS 35571 35572 35573 35574 35575 35576 35577 35578 35579 35580
Serial number
Kontrolle Farbauftrag /
Inspection of application 0 0 0 [3 0 / 0 0 0 0
Joz 3? }g 31
£ ! C
yfo /I0Z 52
Min. =
ft
S 60 gm
;hicht/Powder coating
w
2 'S ?
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
MINOR Gland bolt A193 B8M S18595 DK20210315-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210315-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 12 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 95 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 105 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 25 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 18 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 24 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 98 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 12 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 105 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 28/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 16 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 95 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 80 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 85 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C740
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 29/06/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F14-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35982
Motor serial number Valve number
Motor Seriennummer 1721NM72510 Ventilnummer 01GEH-10-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 462
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 443
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-10-AA053
Serial number
Seriennummer 1721NS35983
Motor serial number Valve number
Motor Seriennummer 1721NM72509 Ventilnummer 01GEH-20-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 415
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 455
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,8
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-20-AA053
Serial number
Seriennummer 1721NS35984
Motor serial number Valve number
Motor Seriennummer 1721NM72508 Ventilnummer 01GEH-30-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 416
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 451
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,8
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-30-AA053
Serial number
Seriennummer 1721NS35985
Motor serial number Valve number
Motor Seriennummer 1721NM72507 Ventilnummer 01GEH-40-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 448
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 435
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,9
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-40-AA053
Serial number
Seriennummer 1721NS35986
Motor serial number Valve number
Motor Seriennummer 1721NM72506 Ventilnummer 01GEH-50-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 471
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 487
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,8
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-50-AA053
Serial number
Seriennummer 1721NS35987
Motor serial number Valve number
Motor Seriennummer 1721NM72505 Ventilnummer 01GEH-60-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 430
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 466
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-60-AA053
Serial number
Seriennummer 1721NS35988
Motor serial number Valve number
Motor Seriennummer 1721NM72504 Ventilnummer 01GEH-70-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 436
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 412
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-70-AA053
Serial number
Seriennummer 1721NS35989
Motor serial number Valve number
Motor Seriennummer 1721NM72503 Ventilnummer 01GEH-80-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 427
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 465
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-80-AA053
Serial number
Seriennummer 1721NS35990
Motor serial number Valve number
Motor Seriennummer 1721NM72502 Ventilnummer 01GEH-90-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 429
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 427
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-90-AA053
Serial number
Seriennummer 1721NS35991
Motor serial number Valve number
Motor Seriennummer 1721NM72501 Ventilnummer 01GEH-00-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 421
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 433
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEH-00-AA053
Serial number
Seriennummer 1721NS35992
Motor serial number Valve number
Motor Seriennummer 1721NM72500 Ventilnummer 02GEH-10-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 451
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 399
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-10-AA053
Serial number
Seriennummer 1721NS35993
Motor serial number Valve number
Motor Seriennummer 1721NM72499 Ventilnummer 02GEH-20-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 457
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 431
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-20-AA053
Serial number
Seriennummer 1721NS35994
Motor serial number Valve number
Motor Seriennummer 1721NM72497 Ventilnummer 02GEH-30-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 440
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 412
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-30-AA053
Serial number
Seriennummer 1721NS35995
Motor serial number Valve number
Motor Seriennummer 1721NM72498 Ventilnummer 02GEH-40-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 456
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 455
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-40-AA053
Serial number
Seriennummer 1721NS35996
Motor serial number Valve number
Motor Seriennummer 1721NM72496 Ventilnummer 02GEH-50-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 423
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 446
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-50-AA053
Serial number
Seriennummer 1721NS35997
Motor serial number Valve number
Motor Seriennummer 1721NM72495 Ventilnummer 02GEH-60-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 451
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 386
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-60-AA053
Serial number
Seriennummer 1721NS35998
Motor serial number Valve number
Motor Seriennummer 1721NM72494 Ventilnummer 02GEH-70-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 415
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 441
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-70-AA053
Serial number
Seriennummer 1721NS35999
Motor serial number Valve number
Motor Seriennummer 1721NM72493 Ventilnummer 02GEH-80-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 429
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 408
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-80-AA053
Serial number
Seriennummer 1721NS36000
Motor serial number Valve number
Motor Seriennummer 1721NM72492 Ventilnummer 02GEH-90-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 428
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 433
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-90-AA053
Serial number
Seriennummer 1721NS36001
Motor serial number Valve number
Motor Seriennummer 1721NM72491 Ventilnummer 02GEH-00-AA053
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 415
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 443
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEH-00-AA053
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 17.05.2021 Prüfer i. A. Nagl, Leo
Quality assurance Date Inspector
Qualitätssicherung Datum 20.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35982 01GEH-10-AA053 01GEH-10-AA053
1721NS35983 01GEH-20-AA053 01GEH-20-AA053
1721NS35984 01GEH-30-AA053 01GEH-30-AA053
1721NS35985 01GEH-40-AA053 01GEH-40-AA053
1721NS35986 01GEH-50-AA053 01GEH-50-AA053
1721NS35987 01GEH-60-AA053 01GEH-60-AA053
1721NS35988 01GEH-70-AA053 01GEH-70-AA053
1721NS35989 01GEH-80-AA053 01GEH-80-AA053
1721NS35990 01GEH-90-AA053 01GEH-90-AA053
1721NS35991 01GEH-00-AA053 01GEH-00-AA053
1721NS35992 02GEH-10-AA053 02GEH-10-AA053
1721NS35993 02GEH-20-AA053 02GEH-20-AA053
1721NS35994 02GEH-30-AA053 02GEH-30-AA053
1721NS35995 02GEH-40-AA053 02GEH-40-AA053
1721NS35996 02GEH-50-AA053 02GEH-50-AA053
1721NS35997 02GEH-60-AA053 02GEH-60-AA053
1721NS35998 02GEH-70-AA053 02GEH-70-AA053
1721NS35999 02GEH-80-AA053 02GEH-80-AA053
1721NS36000 02GEH-90-AA053 02GEH-90-AA053
1721NS36001 02GEH-00-AA053 02GEH-00-AA053
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 20.05.2021 i. A. Butterweck
Serial number
Seriennummer 1821MA11787
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35992 Ventilnummer 02GEH-10-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11788
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35998 Ventilnummer 02GEH-70-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11789
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35999 Ventilnummer 02GEH-80-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11790
Actuator serial number Valve number
Antrieb Seriennummer 1721NS36001 Ventilnummer 02GEH-00-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11791
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35990 Ventilnummer 01GEH-90-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11792
Actuator serial number Valve number
Antrieb Seriennummer 1721NS36000 Ventilnummer 02GEH-90-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11793
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35986 Ventilnummer 01GEH-50-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11794
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35987 Ventilnummer 01GEH-60-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11795
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35983 Ventilnummer 01GEH-20-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11796
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35995 Ventilnummer 02GEH-40-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11797
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35988 Ventilnummer 01GEH-70-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11798
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35985 Ventilnummer 01GEH-40-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11799
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35984 Ventilnummer 01GEH-30-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11800
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35989 Ventilnummer 01GEH-80-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11801
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35997 Ventilnummer 02GEH-60-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11802
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35994 Ventilnummer 02GEH-30-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11803
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35991 Ventilnummer 01GEH-00-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11804
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35993 Ventilnummer 02GEH-20-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11805
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35996 Ventilnummer 02GEH-50-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA11806
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35982 Ventilnummer 01GEH-10-AA053
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 07.05.2021 Prüfer i. A. Loesch, Karl
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 20.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient:
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness fest - gear housing functional 100% N/A K 06.03.033.xx data based (ERP) H
6.2 Visual inspection visual 100% TBD3 KV06.03.033.xx’ data based (ERP)
Remarks:
AUMA Quality Assurance 7
Internal documents are a ailable for re iew only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 25.05.2021 Signature i.A. ;Buttero/eck; Ralf
f(
3to be determined between AUMA and customer, otherwise not applicable
auma@
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Ger any
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.8 Test under load functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel acti ation functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
6.15 Inspection before wet painting (if applicable) isual 100% N/A3 KV06.03.033.xx 1
painting specification2
data based (ERP) H A
Remarks: AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order acknowledgement Date 25.05.2021 Signature i.A. Butterweck, alf
3to be determined between AUMA and customer, otherwise not applicable
Final dient:
6.16 Final inspection isual 100% N/A3 KV06.03.033.xx' data based (ERP) H
/ 7
/
AV00.03.001.xx1
6.17 Packing and document review visual 100% N/A3 packing list , H
packing specification
Inspection release
7.0 Inspection release note (if applicable) review 100% 100% PO, PR requirements
note (IRN)
Seriennummer 1721 NS 35992 35993 35994 35995 35996 35997 35998 35999 36000 36001
Serial number
0)
T3
:>
Kontrolle Farbauftrag /
Inspection of application 0 ..
0 0 0 0 0 0 0 0 0
chicht / Po coating
£ 1
)
Min. =
60 gm Dl so AOi 02 n
U
Bo?
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 12 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 8 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 11 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 6 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 11 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 10 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 1 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 2,5 bar 2,5 bar bar bar Handwheel radius (m)
Max allowable BTO: 20
Nm Nm Nm 12 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
TEST RESULT OPERATOR NAME MARENCO VARNI CRISTIAN DYNAMOMETRIC KEY ID C1004
Satisfactory X internal X TEST BENCH ID 14 -IT1047 NORBAR ID
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 30/06/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F05-F07-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ VD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35735
Motor serial number Valve number
Motor Seriennummer 1721NM71436 Ventilnummer 01GEJ-19-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 59
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-19-AA051
Serial number
Seriennummer 1721NS35736
Motor serial number Valve number
Motor Seriennummer 1721NM71437 Ventilnummer 01GEJ-29-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 64
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 60
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-29-AA051
Serial number
Seriennummer 1721NS35737
Motor serial number Valve number
Motor Seriennummer 1721NM71438 Ventilnummer 01GEJ-39-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-39-AA051
Serial number
Seriennummer 1721NS35738
Motor serial number Valve number
Motor Seriennummer 1721NM71439 Ventilnummer 01GEJ-49-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 59
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,2
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-49-AA051
Serial number
Seriennummer 1721NS35739
Motor serial number Valve number
Motor Seriennummer 1721NM71440 Ventilnummer 01GEJ-59-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 61
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-59-AA051
Serial number
Seriennummer 1721NS35740
Motor serial number Valve number
Motor Seriennummer 1721NM71441 Ventilnummer 02GEJ-19-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 62
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,3
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-19-AA051
Serial number
Seriennummer 1721NS35741
Motor serial number Valve number
Motor Seriennummer 1721NM71442 Ventilnummer 02GEJ-29-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 58
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 64
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-29-AA051
Serial number
Seriennummer 1721NS35742
Motor serial number Valve number
Motor Seriennummer 1721NM71443 Ventilnummer 02GEJ-39-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 57
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 59
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-39-AA051
Serial number
Seriennummer 1721NS35743
Motor serial number Valve number
Motor Seriennummer 1721NM71444 Ventilnummer 02GEJ-49-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 58
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 60
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,4
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-49-AA051
Serial number
Seriennummer 1721NS35744
Motor serial number Valve number
Motor Seriennummer 1721NM71445 Ventilnummer 02GEJ-59-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 50 Drehmoment Öffnen (IST) [Nm] 60
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 50 Drehmoment Schließen (IST) [Nm] 62
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Öffnen (IST) [s] 8,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 9,0 Stellzeit für 90° Schließen (IST) [s] 8,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 93,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,5 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-59-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 11.05.2021 Prüfer i. A. Papadopoulos, Athana
Quality assurance Date Inspector
Qualitätssicherung Datum 17.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35735 01GEJ-19-AA051 01GEJ-19-AA051
1721NS35736 01GEJ-29-AA051 01GEJ-29-AA051
1721NS35737 01GEJ-39-AA051 01GEJ-39-AA051
1721NS35738 01GEJ-49-AA051 01GEJ-49-AA051
1721NS35739 01GEJ-59-AA051 01GEJ-59-AA051
1721NS35740 02GEJ-19-AA051 02GEJ-19-AA051
1721NS35741 02GEJ-29-AA051 02GEJ-29-AA051
1721NS35742 02GEJ-39-AA051 02GEJ-39-AA051
1721NS35743 02GEJ-49-AA051 02GEJ-49-AA051
1721NS35744 02GEJ-59-AA051 02GEJ-59-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 17.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA11338
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35739 Ventilnummer 01GEJ-59-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11339
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35738 Ventilnummer 01GEJ-49-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11340
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35742 Ventilnummer 02GEJ-39-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11341
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35743 Ventilnummer 02GEJ-49-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11342
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35735 Ventilnummer 01GEJ-19-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11343
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35736 Ventilnummer 01GEJ-29-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11344
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35741 Ventilnummer 02GEJ-29-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11345
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35740 Ventilnummer 02GEJ-19-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11346
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35744 Ventilnummer 02GEJ-59-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11347
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35737 Ventilnummer 01GEJ-39-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 06.05.2021 Prüfer i. A. Otto, Dominik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 17.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
Remarks:
AUMA Quality Assurance
Internal documents are available for re iew only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order ac nowledgement Date 17.05.2021 Signature
3to be determined between AUMA and customer, otherwise not applicable
1
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100 % N/A KV06.03.033.xx1 data based (ERP) H
6.2 Visual inspection visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
Remarks:
AUMA Quality Assurance
internal documents are a ailable for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
/
zpainting specification according to order acknowledgement Date 17.05.2021 Signature i.A. 6u6er\ b i Ralf
3to be determined between AUMA and customer, otherwise not applicable
ayma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.8 Test under load functional 100% TBD3 Kvoe.oa.oas.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100% TBD3 KVOS.OS.OSS.xx' data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx' data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx' data based (ERP)
6.14 IP68 - Leak tightness fest functional 100% N/A3 KV06.03.033.xx' data based (ERP) H
KV06.03.033.xx 1
6.15 Inspection before wet painting (if applicable) isual 100% N/A3
painting specification2
data based (ERP) H
Final dient:
6.16 Final inspection isual 100% N/A3 KV06.03.033.xx' data based (ERP) H
7
AV00.03.001.xx1
6.17 Packing and document review visual 100 % N/A3 packing list c H
packing specification
Inspection release
7.0 Inspection release note (if applicable) review 100% 100 % PO, PR requirements
note (IRN)
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 40 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 45 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 48 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 30/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 65 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 62 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 66 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 12 Nm Nm Nm Satisfactory YES NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 1 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 60 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 17 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 15 Nm Nm Nm Satisfactory YES NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 68 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 15 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 20 Nm Nm Nm Satisfactory YES NO
REMARKS:
Gerardi
DATE: DATE:
DATE: 02/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F10-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,01 Motor Leistung [kW] 0,01
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35745
Motor serial number Valve number
Motor Seriennummer 1721NM71446 Ventilnummer 01GEJ-18-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 112
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 100
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-18-AA051
Serial number
Seriennummer 1721NS35746
Motor serial number Valve number
Motor Seriennummer 1721NM71447 Ventilnummer 01GEJ-28-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 106
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 105
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-28-AA051
Serial number
Seriennummer 1721NS35747
Motor serial number Valve number
Motor Seriennummer 1721NM71448 Ventilnummer 01GEJ-38-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 116
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 115
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-38-AA051
Serial number
Seriennummer 1721NS35748
Motor serial number Valve number
Motor Seriennummer 1721NM71449 Ventilnummer 01GEJ-48-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 123
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 108
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-48-AA051
Serial number
Seriennummer 1721NS35749
Motor serial number Valve number
Motor Seriennummer 1721NM71450 Ventilnummer 01GEJ-58-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 115
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 104
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-58-AA051
Serial number
Seriennummer 1721NS35750
Motor serial number Valve number
Motor Seriennummer 1721NM71451 Ventilnummer 02GEJ-18-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 119
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 119
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-18-AA051
Serial number
Seriennummer 1721NS35751
Motor serial number Valve number
Motor Seriennummer 1721NM71452 Ventilnummer 02GEJ-28-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 113
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 111
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-28-AA051
Serial number
Seriennummer 1721NS35752
Motor serial number Valve number
Motor Seriennummer 1721NM71453 Ventilnummer 02GEJ-38-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 113
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 116
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-38-AA051
Serial number
Seriennummer 1721NS35753
Motor serial number Valve number
Motor Seriennummer 1721NM71454 Ventilnummer 02GEJ-48-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 109
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 113
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-48-AA051
Serial number
Seriennummer 1721NS35754
Motor serial number Valve number
Motor Seriennummer 1721NM71455 Ventilnummer 02GEJ-58-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 108
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 114
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-58-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 12.05.2021 Prüfer i. A. Papadopoulos, Athana
Quality assurance Date Inspector
Qualitätssicherung Datum 17.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35745 01GEJ-18-AA051 01GEJ-18-AA051
1721NS35746 01GEJ-28-AA051 01GEJ-28-AA051
1721NS35747 01GEJ-38-AA051 01GEJ-38-AA051
1721NS35748 01GEJ-48-AA051 01GEJ-48-AA051
1721NS35749 01GEJ-58-AA051 01GEJ-58-AA051
1721NS35750 02GEJ-18-AA051 02GEJ-18-AA051
1721NS35751 02GEJ-28-AA051 02GEJ-28-AA051
1721NS35752 02GEJ-38-AA051 02GEJ-38-AA051
1721NS35753 02GEJ-48-AA051 02GEJ-48-AA051
1721NS35754 02GEJ-58-AA051 02GEJ-58-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 17.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA11348
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35749 Ventilnummer 01GEJ-58-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11349
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35751 Ventilnummer 02GEJ-28-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11350
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35752 Ventilnummer 02GEJ-38-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11351
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35754 Ventilnummer 02GEJ-58-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11352
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35750 Ventilnummer 02GEJ-18-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11353
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35747 Ventilnummer 01GEJ-38-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11354
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35746 Ventilnummer 01GEJ-28-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11355
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35745 Ventilnummer 01GEJ-18-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11356
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35753 Ventilnummer 02GEJ-48-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11357
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35748 Ventilnummer 01GEJ-48-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 06.05.2021 Prüfer i. A. Otto, Dominik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 17.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient:
z
independent)
spot check
:
dimensional inspection plan
3.0 Fabrication and in-process inspection (order¬ N/A data based (ERP)
visual drawing
independent)
spot check
dimensional inspection plan
4.0 Powder coating and inspection
visual
(order¬ N/A LVP1.001.x
data based (ERP)
independent)
Actuator control assembly and final
5.0
inspection
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100 % N/A KV06.03.033.xx1 data based (ERP) H
6.2 Visual inspection isual 100% TBD3 KV06.03.033.xx1 data based (ERP)
Remarks:
AUMA Quality Assurance
Internal documents are a ailable for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
zpainting specification according to order acknowledgement Date 17.05.2021 Signature i.A. fter eck Rälf
7 "
3to be determined between AUMA and customer, otherwise not applicable
/
auma0
AUMA Riester Gm H & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 3 of
Final dient:
6.8 Test under ioad functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
6.15 Inspection before wet painting (if applicable) visual 100% N/A3 KV06.03.033.xx 1
painting specification2
data based (ERP) H
7/
Remarks: AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. BtittenA/dck. ilf
3to be determined between AUMA and customer, otherwise not applicable
auma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2 -14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 4 of 4
Final dient:
6.16 Final inspection isual 100 % N/A3 Kvoe.os.osa.xx' data based (ERP) H
AV00.03.001.xx1
6.17 Packing and document review isual 100% N/A3 packing list
packing specification
Inspection release
7.0 Inspection release note (if applicable) review 100% 100% PO, PR requirements 'H
note (IRN)
Remarks:
AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. Butterweck) Ralf
3to be determined between AUMA and customer, otherwise not applicable
/
AUMA Riester GmbH & Co.KG
Daimlerstr. 9
73760 Ostfildern, Germany
aojma® Y006.733
Issue 1.19
CERTIFICATO DI COLLAUDO / INSPECTION CERTIFICATE
CONFORME A / CONFORM TO:
EN 10204 3.1 EN 10204 3.2
Certificato No. / Certificate No. : CI 0519/21
Pagina / Page _1_ of _2_
Stabilimento e Uffici / Plant and Offices Via tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.VALVITALIA S.p.A..com, e-mail: info@VALVITALIA S.p.A..com
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 106 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 98 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 48 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 12 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 52 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES x NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 40 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 12 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES x NO
REMARKS:
Andrea Gerardi
DATE: DATE:
DATE: 01/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 24 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 102 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm Nm Nm Nm Satisfactory YES x NO
REMARKS:
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 43 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 132
Nm Nm Nm 108 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES x NO
REMARKS:
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F14-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35805
Motor serial number Valve number
Motor Seriennummer 1721NM71486 Ventilnummer 01GEJ-17-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 421
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 454
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-17-AA051
Serial number
Seriennummer 1721NS35806
Motor serial number Valve number
Motor Seriennummer 1721NM71487 Ventilnummer 01GEJ-27-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 437
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 430
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-27-AA051
Serial number
Seriennummer 1721NS35807
Motor serial number Valve number
Motor Seriennummer 1721NM71488 Ventilnummer 01GEJ-37-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 415
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 425
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 48,1
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-37-AA051
Serial number
Seriennummer 1721NS35808
Motor serial number Valve number
Motor Seriennummer 1721NM71489 Ventilnummer 01GEJ-47-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 420
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 429
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-47-AA051
Serial number
Seriennummer 1721NS35809
Motor serial number Valve number
Motor Seriennummer 1721NM71490 Ventilnummer 01GEJ-57-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 407
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 438
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-57-AA051
Serial number
Seriennummer 1721NS35810
Motor serial number Valve number
Motor Seriennummer 1721NM71491 Ventilnummer 02GEJ-17-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 478
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 400
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,6 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-17-AA051
Serial number
Seriennummer 1721NS35811
Motor serial number Valve number
Motor Seriennummer 1721NM71492 Ventilnummer 02GEJ-27-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 422
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 426
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-27-AA051
Serial number
Seriennummer 1721NS35812
Motor serial number Valve number
Motor Seriennummer 1721NM71493 Ventilnummer 02GEJ-37-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 426
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 447
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-37-AA051
Serial number
Seriennummer 1721NS35813
Motor serial number Valve number
Motor Seriennummer 1721NM71494 Ventilnummer 02GEJ-47-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 424
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 434
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-47-AA051
Serial number
Seriennummer 1721NS35814
Motor serial number Valve number
Motor Seriennummer 1721NM71495 Ventilnummer 02GEJ-57-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 439
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 440
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-57-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 12.05.2021 Prüfer i. A. Papadopoulos, Athana
Quality assurance Date Inspector
Qualitätssicherung Datum 17.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35805 01GEJ-17-AA051 01GEJ-17-AA051
1721NS35806 01GEJ-27-AA051 01GEJ-27-AA051
1721NS35807 01GEJ-37-AA051 01GEJ-37-AA051
1721NS35808 01GEJ-47-AA051 01GEJ-47-AA051
1721NS35809 01GEJ-57-AA051 01GEJ-57-AA051
1721NS35810 02GEJ-17-AA051 02GEJ-17-AA051
1721NS35811 02GEJ-27-AA051 02GEJ-27-AA051
1721NS35812 02GEJ-37-AA051 02GEJ-37-AA051
1721NS35813 02GEJ-47-AA051 02GEJ-47-AA051
1721NS35814 02GEJ-57-AA051 02GEJ-57-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 17.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA11408
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35810 Ventilnummer 02GEJ-17-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11409
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35809 Ventilnummer 01GEJ-57-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11410
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35812 Ventilnummer 02GEJ-37-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11411
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35807 Ventilnummer 01GEJ-37-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11412
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35805 Ventilnummer 01GEJ-17-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11413
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35814 Ventilnummer 02GEJ-57-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11414
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35813 Ventilnummer 02GEJ-47-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11415
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35806 Ventilnummer 01GEJ-27-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11416
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35811 Ventilnummer 02GEJ-27-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11417
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35808 Ventilnummer 01GEJ-47-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 06.05.2021 Prüfer i. A. Otto, Dominik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 17.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
5.2
Safety test
functional 100% N/A KV09.03.003.xx1
data based (ERP) H
(protective earthing and high voltage test) inspection certificate
Remarks:
AUMA Quality Assurance
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.05.2021 Signature
3to be determined between AUMA and customer, otherwise not applicable
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100 % N/A KV06.03.033.xx1 data based (ERP) H
6.2 Visual inspection visual 100% TBD3 KV06.03.033.xx1 data based (ERP) /
data based (ERP)
6.3 Protective earthing test functional 100% TBD3 KV06.03.033.xx1
inspection certificate
7
data based (ERP)
6.4 High oltage test functional 100% TBD3 KV06.03.033.xx1
inspection certificate
H
6.5 Wiring check functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
/
data based (ERP)
6.6 MWG limit setting functional 100% TBD3 KV06.03.033.xx1
inspection certificate
Final dient:
6.8 Test under load functional 100% TBD3 KVOe.OS.OSS.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
/
KV06.03.033.xx 1
6.15 Inspection betöre wet painting (if applicable) visual 100 % N/A3
painting specification2
data based (ERP) H
atuma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 4 of 4
Final dient:
6.16 Final inspection visual 100% N/A3 KV06.03.033.xx1 data based (ERP) H
Inspection release
7.0 Inspection release note (if applicable) review 100% 100% PO, PR requirements
note (IRN)
H 7
J
;hicht/Powder coating
£ 1
5«?
I ir
Min. =
60 m 7 8? P 3 $ /0$ ? Öl
) ;ö iS
2 /Ul jß AS ynz
>
A8h } ZI
.C 1= l?
l AS
o
Z5 Max.
CL
I
Bemerkungen / Remarks Qualitätssicherung / Quality assurance
Datum Name
Date 1 7. Mai 7021 Name
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
Seat retainer UNS S31803 61471 2015-116826 KUK DONG STAINLESS CO.,LTD. -
OR
Bolt A193 B8M S40045 DK20210223-04 DAEKANG BOLT&NUT EQUIVALENT
Lock pin UNS S31803 N01655 30226-2076 DONG-A SPECIAL STEEL -
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 55 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Cristian Marenco
DATE: DATE:
DATE: 23/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 58 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 45 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 8 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 48 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 8 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 24/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 45 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 5 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 25/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 40 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 5 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 8 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 25/06/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0 ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: 87
Nm Nm Nm 50 Nm Nm Nm For lever operated valve:
Max allowable running: Nm Nm Nm 8 Nm Nm Nm Lever length (m)
Max allowable ETC: Nm Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Christian Dallera
DATE: DATE:
DATE: 25/06/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F10-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,01 Motor Leistung [kW] 0,01
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35755
Motor serial number Valve number
Motor Seriennummer 1721NM71456 Ventilnummer 01GEJ-10-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 116
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 106
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-10-AA051
Serial number
Seriennummer 1721NS35756
Motor serial number Valve number
Motor Seriennummer 1721NM71457 Ventilnummer 01GEJ-20-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 103
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 104
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-20-AA051
Serial number
Seriennummer 1721NS35757
Motor serial number Valve number
Motor Seriennummer 1721NM71458 Ventilnummer 01GEJ-30-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 102
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 100
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-30-AA051
Serial number
Seriennummer 1721NS35758
Motor serial number Valve number
Motor Seriennummer 1721NM71459 Ventilnummer 01GEJ-40-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 111
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 119
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-40-AA051
Serial number
Seriennummer 1721NS35759
Motor serial number Valve number
Motor Seriennummer 1721NM71460 Ventilnummer 01GEJ-50-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 109
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 110
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-50-AA051
Serial number
Seriennummer 1721NS35760
Motor serial number Valve number
Motor Seriennummer 1721NM71461 Ventilnummer 02GEJ-10-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 106
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 103
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-10-AA051
Serial number
Seriennummer 1721NS35761
Motor serial number Valve number
Motor Seriennummer 1721NM71462 Ventilnummer 02GEJ07 AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 112
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 102
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ07 AA051
Serial number
Seriennummer 1721NS35762
Motor serial number Valve number
Motor Seriennummer 1721NM71463 Ventilnummer 02GEJ-30-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 120
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 113
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-30-AA051
Serial number
Seriennummer 1721NS35763
Motor serial number Valve number
Motor Seriennummer 1721NM71464 Ventilnummer 02GEJ-40-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 113
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 116
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,7
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-40-AA051
Serial number
Seriennummer 1721NS35764
Motor serial number Valve number
Motor Seriennummer 1721NM71465 Ventilnummer 02GEJ-50-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 100 Drehmoment Öffnen (IST) [Nm] 107
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 100 Drehmoment Schließen (IST) [Nm] 105
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Öffnen (IST) [s] 23,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 25,0 Stellzeit für 90° Schließen (IST) [s] 23,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-50-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 12.05.2021 Prüfer i. A. Nagl, Leo
Quality assurance Date Inspector
Qualitätssicherung Datum 17.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35755 01GEJ-10-AA051 01GEJ-10-AA051
1721NS35756 01GEJ-20-AA051 01GEJ-20-AA051
1721NS35757 01GEJ-30-AA051 01GEJ-30-AA051
1721NS35758 01GEJ-40-AA051 01GEJ-40-AA051
1721NS35759 01GEJ-50-AA051 01GEJ-50-AA051
1721NS35760 02GEJ-10-AA051 02GEJ-10-AA051
1721NS35761 02GEJ07 AA051 02GEJ07 AA051
1721NS35762 02GEJ-30-AA051 02GEJ-30-AA051
1721NS35763 02GEJ-40-AA051 02GEJ-40-AA051
1721NS35764 02GEJ-50-AA051 02GEJ-50-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 17.05.2021 i. A. Butterweck
Serial number
Seriennummer 1721MA11358
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35757 Ventilnummer 01GEJ-30-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11359
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35759 Ventilnummer 01GEJ-50-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11360
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35761 Ventilnummer 02GEJ07 AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11361
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35755 Ventilnummer 01GEJ-10-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11362
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35756 Ventilnummer 01GEJ-20-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11363
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35764 Ventilnummer 02GEJ-50-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11364
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35760 Ventilnummer 02GEJ-10-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11365
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35763 Ventilnummer 02GEJ-40-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11366
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35762 Ventilnummer 02GEJ-30-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1721MA11367
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35758 Ventilnummer 01GEJ-40-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 06.05.2021 Prüfer i. A. Otto, Dominik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 17.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of 4
Final dient:
'f
independent)
spot check
dimensional inspection plan
3.0 Fabrication and in-process inspection
visual
(order¬ N/A data based (ERP)
drawing
independent)
spot check
dimensional inspection plan
4.0 Powder coating and inspection
visual
(order¬ N/A LV P1.001.xx1 data based (ERP) / H
independent)
Actuator control assembly and final
5.0
inspection /
data based (ERP)
5.1 Identification and visual inspection visual 100% N/A KVOQ.OS.OOS.xx1
inspection certificate
Remarks:
AUMA Quality Assurance s 1
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2painting specification according to order acknowledgement Date 17.05.2021 Signature i.A. Bu terweck, Ralf
3to be determined between AUMA and customer, otherwise not applicable
auma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness lest - gear housing functional 100% N/A Kvoe.os.oaa.xx' data based (ERP) H
5
6.2 Visual inspection visual 100% TBD3 KVOe.OS.OSS.xx' data based (ERP) /
data based (ERP)
6.3 Protecti e earthing test functional 100% TBD3 KV06.03.033.xx1
inspection certificate
auma
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intmsive
Page of
Final dient:
6.8 Test under load functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.10 Mechanical position indicator visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
KV06.03.033.xx 1
6.15 Inspection before wet painting (if applicable) visual 100% N/A3
painting specification2
data based (ERP) H
Remarks:
AUMA Quality Assurance sj
Internal documents are availabie for review only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 17.05.2021 Signature i.A.
3to be determined between AUMA and customer, otherwise not applicable
Order from: AUMA Italiana s.r.l. PO number: |44256#18 AUMA Order no.: 23094988
Final dient:
6.16 Final inspection visual 100 % N/A3 KV06.03.033. x1 data based (ERP) H
Kontrolle Farbauftrag /
Inspection of application 0 0 0 0 L-1 1_
0 0 0
£ 1 Min. =
60 m /toi g3 £ 9r
chicht/Powder coating v U)
GO
2 o B1
/W 5
0
>
Q.
j=
= Max.
7 2S /PI /LtA 2/ /
,,- - 7
Bemerkungen / Remarks Qualitätssicherung / Quality assurance
Datum Name
Date 1 7, Mai 2021 Name '
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 12 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 95 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 98 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 112 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 20 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 110 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 15 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 100 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 18 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 22 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 517 Nm Nm 120 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 20 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 22 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 02/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F14-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,04 Motor Leistung [kW] 0,04
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1821NS36141
Motor serial number Valve number
Motor Seriennummer 1821NM72931 Ventilnummer 01GEJ-13-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 479
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 441
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-13-AA051
Serial number
Seriennummer 1821NS36142
Motor serial number Valve number
Motor Seriennummer 1821NM72930 Ventilnummer 01GEJ-23-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 431
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 450
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-23-AA051
Serial number
Seriennummer 1821NS36143
Motor serial number Valve number
Motor Seriennummer 1821NM72929 Ventilnummer 01GEJ-33-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 469
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 454
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,8
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,5
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-33-AA051
Serial number
Seriennummer 1821NS36144
Motor serial number Valve number
Motor Seriennummer 1821NM72928 Ventilnummer 01GEJ-43-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 440
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 449
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,6
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,6 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-43-AA051
Serial number
Seriennummer 1821NS36145
Motor serial number Valve number
Motor Seriennummer 1821NM72927 Ventilnummer 01GEJ-53-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 400
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 429
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,7
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 01GEJ-53-AA051
Serial number
Seriennummer 1821NS36146
Motor serial number Valve number
Motor Seriennummer 1821NM72926 Ventilnummer 02GEJ-13-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 409
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 379
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,4
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-13-AA051
Serial number
Seriennummer 1821NS36147
Motor serial number Valve number
Motor Seriennummer 1821NM72925 Ventilnummer 02GEJ-23-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 440
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 463
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,2
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-23-AA051
Serial number
Seriennummer 1821NS36148
Motor serial number Valve number
Motor Seriennummer 1821NM72924 Ventilnummer 02GEJ-33-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 467
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 435
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,7
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-33-AA051
Serial number
Seriennummer 1821NS36149
Motor serial number Valve number
Motor Seriennummer 1821NM72923 Ventilnummer 02GEJ-43-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 418
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 408
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,5
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,4
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-43-AA051
Serial number
Seriennummer 1821NS36150
Motor serial number Valve number
Motor Seriennummer 1821NM72922 Ventilnummer 02GEJ-53-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 400 Drehmoment Öffnen (IST) [Nm] 407
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 400 Drehmoment Schließen (IST) [Nm] 437
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 47,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 47,1
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,7 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 02GEJ-53-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 17.05.2021 Prüfer i. A. Nagl, Leo
Quality assurance Date Inspector
Qualitätssicherung Datum 20.05.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1821NS36141 01GEJ-13-AA051 01GEJ-13-AA051
1821NS36142 01GEJ-23-AA051 01GEJ-23-AA051
1821NS36143 01GEJ-33-AA051 01GEJ-33-AA051
1821NS36144 01GEJ-43-AA051 01GEJ-43-AA051
1821NS36145 01GEJ-53-AA051 01GEJ-53-AA051
1821NS36146 02GEJ-13-AA051 02GEJ-13-AA051
1821NS36147 02GEJ-23-AA051 02GEJ-23-AA051
1821NS36148 02GEJ-33-AA051 02GEJ-33-AA051
1821NS36149 02GEJ-43-AA051 02GEJ-43-AA051
1821NS36150 02GEJ-53-AA051 02GEJ-53-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 20.05.2021 i. A. Butterweck
Serial number
Seriennummer 1821MA12216
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36142 Ventilnummer 01GEJ-23-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12217
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36143 Ventilnummer 01GEJ-33-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12218
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36147 Ventilnummer 02GEJ-23-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12219
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36146 Ventilnummer 02GEJ-13-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12220
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36145 Ventilnummer 01GEJ-53-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12221
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36148 Ventilnummer 02GEJ-33-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12222
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36150 Ventilnummer 02GEJ-53-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12223
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36149 Ventilnummer 02GEJ-43-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12224
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36144 Ventilnummer 01GEJ-43-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1821MA12225
Actuator serial number Valve number
Antrieb Seriennummer 1821NS36141 Ventilnummer 01GEJ-13-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 10.05.2021 Prüfer i. A. Kern, Yannik
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 20.05.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Qualit Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient:
/
independent)
Actuator control assembly and final
5.0
inspection /
data based (ERP)
5.1 Identification and isual inspection visual 100 % N/A KV09.03.003.xx1
inspection certificate
aums
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.1 Leak tightness test - gear housing functional 100% N/A KV06.03.033.xx1 data based (ERP) H
6.2 Visual inspection visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
- -
Remarks: AUMA Quality Assurance
Internal documents are available for re iew only at AUMA locations
N/A = not applicable; TBD = to be determined
1 latest revision
2 painting specification according to order acknowledgement Date 20.05.2021 Signature i.A. i jf i weck, Ralf
3to be determined between AUMA and customer, otherwise not applicable
auma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page of
Final dient:
6.8 Test under load functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.10 Mechanical Position indicator visual 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.11 Checking handwheel activation functional 100% TBD3 KV06.03.033.xx1 data based (ERP)
6.12 Checking components and accessories functional 100 % TBD3 KV06.03.033.xx1 data based (ERP)
6.14 IP68 - Leak tightness test functional 100% N/A3 KV06.03.033.xx1 data based (ERP) H
KV06.03.033.xx 1
6.15 Inspection betöre wet painting (if applicable) isual 100% N/A3
painting specification2
data based (ERP) H
)
Remarks: AUMA Quality Assurance - 7
Internal documents are available for review only at AUMA locations
N/A = not applicable; TBD = to be deter ined
1 latest revision
2 painting specification according to order acknowledgement Date 20.05.2021 Signature i.A. •'Büt we Ralf
3to be determined between AUMA and customer, otherwise not applicable
auma0
AUMA Riester GmbH & Co.KG
Y006.733
Daimlerstr. 9
Issue 1.19
73760 Ostfildern, Germany
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 4 of 4
Fina dient:
6.16 Final inspection visual 100 % N/A3 KV06.03.033.xx1 data based (ERP) H
AV00.03.001.xx1
6.17 Packing and document review isual 100 % N/A3 packing list
packing specification
7.0 Inspection release note (if applicable) review 100% 100% PO, PR requirements
Inspection release
H
/ yyy/
note (IRN)
ly
J
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
Lock pin A240 316L S36813 190219-1085-00021012 DONG-A SPECIAL STEEL OR EQUIVALENT
MINOR Gland bolt A193 B8M S18595 DK20210223-03 DAEKANG BOLT&NUT OR EQUIVALENT
COMPONENTS Gland Nut A194 8M E40306 DK20210223-02 DAEKANG BOLT&NUT OR EQUIVALENT
0575/21 2.1 DICHIARAZIONE COMPONENTI NON METALLICI / non metallic parts declaration -
DECLARATION OF INCORPORATION
Company with Quality
The valve or the valve+actuator assembly to which this Declaration relates must not be put System
into service Certified by ….. MOD. 4.10.1 REV. 4
until the machinery into which it is to be incorporated has been declared in conformity ==BV 9001:2015 ==
with the provision of the Machinery Directive. IT259786/UK
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 05/07/2021
PRESSURE TEST CERTIFICATE Nr. Mod. 4.10.2 BVPT Rev. 4
SIDE A SIDE B
HYDROSTATIC SEAT TEST Applied pressure (bar) 20.9 Applied pressure (bar N.A. Satisfactory
Max allowable leakage: 0ml/min Test duration (min) 2 Test duration (min) YES X NO
Recorded leakage 0 ml/min Recorded leakage
Acceptance: max bar Relief pressure (bar) Relief pressure (bar) Satisfactory YES NO
OPERATION TORQUE TEST SIDE A SIDE B SIDE A+B BORE For gear operated valve:
Applied pressure (Δp) 4 bar 4 bar bar bar Handwheel radius (m)
Max allowable BTO: N 346 Nm Nm 90 Nm Nm Nm For lever operated valve:
Max allowable running: N Nm Nm 10 Nm Nm Nm Lever length (m)
Max allowable ETC: N Nm Nm 10 Nm Nm Nm Satisfactory YES X NO
REMARKS:
Gorrini P.
DATE: DATE:
DATE: 05/07/2021
DICHIARAZIONE DI CONFORMITA’ MOD
DECLARATION OF CONFORMITY 4.10.2
IN CONFORMITA’ A / IN COMPLIANCE WITH: Rev. 6
EN 10204-2.1 Dated
02/04/2019
Certificato N° / Certificate N° 0575/21
Stabilimento e Uffici / Plant and Offices: Via Tortona , 69 – 27055 Rivanazzano (PV) – Italy,web site: www.valvitalia.com, e-mail: info@valvitalia.com
SI CERTIFICA CHE LE PARTI NON METALLICHE FORNITE SONO CONFORMI ALL’ORDINE SOPRA
CITATO, AI DISEGNI APPROVATI, ALLE SPECIFICHE DI FORNITURA E ALLE NORMATIVE.
________________________________________________________________________________________
WE CERTIFY THAT THE NON-METALLIC PARTS PRODUCTS SUPPLIED AGAINST YOUR ABOVE
PURCHASE ORDER HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE APPLICABLE
PURCHASE ORDER SPECIFICATIONS AND ACCEPTED DRAWINGS.
NOTE / REMARKS
EPDM - PTFE
SI CERTIFICA CHE I PRODOTTI FORNITI SONO STATI PROGETTATI, REALIZZATI E ISPEZIONATI IN CONFORMITA’
AI REQUISITI DELL’ORDINE SOPRA CITATO E ALLE RELATIVE SPECIFICHE E DISEGNI APPROVATI
--------------------------------------------------
WE CERTIFY THAT THE PRODUCTS HAVE BEEN DESIGNED, MANUFACTURED, ASSEMBLED AND INSPECTED IN ACCORDANCE WITH
THE APPLICABLE PURCHASE ORDER SPECIFICATIONS AND APPROVED DRAWINGS.
NOTE / REMARKS
Technical data
Technische Daten
Voltage Frequency Type of current Wiring
Spannung Frequenz Stromart 400V 60Hz 3-ph AC Verdrahtung 00R100-0I1-000
Output mounting flange Operation mode
Anschlussflansch F12-N Betriebsart S2 - 15 MIN.
Motor type Motor power [kW]
Motor Typ SD00063-4-0,02 Motor Leistung [kW] 0,02
Insulation class Electrical connection
Isolationsklasse F Elektrischer Anschluss S0-000
Corrosion protection Colour
Korrosionsschutz LV KS-P1.001 Farbton A0001
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
Serial number
Seriennummer 1721NS35888
Motor serial number Valve number
Motor Seriennummer 1721NM72086 Ventilnummer 00GEK-49-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 212
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 212
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,3
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 49,8
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,5
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 00GEK-49-AA051
Serial number
Seriennummer 1721NS35889
Motor serial number Valve number
Motor Seriennummer 1721NM72085 Ventilnummer 00GEK-50-AA051
Torque Opening (TARGET) [Nm] Torque Opening (ACTUAL) [Nm]
Drehmoment Öffnen (SOLL) [Nm] 200 Drehmoment Öffnen (IST) [Nm] 213
Torque Closing (TARGET) [Nm] Torque Closing (ACTUAL) [Nm]
Drehmoment Schließen (SOLL) [Nm] 200 Drehmoment Schließen (IST) [Nm] 221
Operating time for 90° (TARGET) [s] Operating time for 90°
Opening(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Öffnen (IST) [s] 50,6
Operating time for 90° (TARGET) [s] Operating time for 90° Closing
(ACTUAL) [s]
Stellzeit für 90° (SOLL) [s] 50,0 Stellzeit für 90° Schließen (IST) [s] 50,3
Swing angle (TARGET) [°] Swing angle (ACTUAL) [°]
Schwenkwinkel (SOLL) [°] 92,0 Schwenkwinkel (IST) [°] 92,6
No load current [A] High voltage test
Leerlaufstrom [A] 0,4 Hochspannungstest o.k.
Insulation resistance test Protective earthing test
Isolationswiderstandsprüfung o.k. Schutzanschlussprüfung o.k.
Functional test KKS number
Funktionsprüfung o.k. KKS Nummer
Special marking
Sonderkennzeichnung 00GEK-50-AA051
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 22.05.2021 Prüfer i. A. Nagl, Leo
Quality assurance Date Inspector
Qualitätssicherung Datum 07.06.2021 Prüfer i. A. Butterweck
Serial number / Seriennummer Valve number / Ventilnummer Special marking / KKS number / KKS Nummer
Sonderkennzeichnung
1721NS35888 00GEK-49-AA051 00GEK-49-AA051
1721NS35889 00GEK-50-AA051 00GEK-50-AA051
We hereby certify that for the part-turn actuators mentioned above, the applicable European directives as well as the generally valid industrial standards
have been observed. Please refer to the valid declarations of incorporation and conformity for further information regarding the standards applied. The
individual parts and sub-assemblies of the part-turn actuators were continuously subjected to inspections during manufacture and assembly. After
assembly, each part-turn actuator has been verified in compliance with internal specifications and considered perfectly operational.
Für die oben genannten Schwenkantriebe bestätigen wir, dass die zutreffenden Europäischen Richtlinien sowie die allgemein gültigen Industrienormen
beachtet wurden. Weitere Informationen zu den angewandten Normen sind in den aktuell gültigen Hersteller- und Konformitätserklärungen zu finden. Die
Einzelteile und Baugruppen der Schwenkantriebe wurden während der Fertigung und Montage laufenden Kontrollen unterzogen. Nach erfolgter Montage
wurde jeder Schwenkantrieb nach internen Vorschriften geprüft und für einwandfrei befunden.
Remarks
Bemerkungen
Quality assurance Date
Qualitätssicherung Datum 07.06.2021 i. A. Butterweck
Serial number
Seriennummer 1921MA13963
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35889 Ventilnummer 00GEK-50-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Serial number
Seriennummer 1921MA13964
Actuator serial number Valve number
Antrieb Seriennummer 1721NS35888 Ventilnummer 00GEK-49-AA051
Visual inspection analogue/digital inputs
Sichtkontrolle o.k. Analog/Digital Eingänge o.k.
Functional test High voltage test
Funktionsprüfung o.k. Hochspannungstest o.k.
Position check "Local" Position check "Remote"
Prüfung Stellung "Ort" o.k. Prüfung Stellung "Fern" o.k.
Enclosure protection Explosion protection
Schutzart NEMA6P Explosionsschutz
KKS number Wiring
KKS Nummer Verdrahtung TPC AB0N0-1C1-A000
Special marking
Sonderkennzeichnung
Remarks
Bemerkungen
At final inspection the functions indicated in this document have been verified and are accurate.
Bei der Endabnahme wurden die in dieser Prüfbescheinigung aufgeführten Funktionen überprüft und für einwandfrei befunden.
Functional test Date Inspector
Funktionsprüfung Datum 17.05.2021 Prüfer i. A. Burgert, Kevin
Quality assurance Date Final inspection representative
Qualitätssicherung Datum 07.06.2021 Abnahmebeauftragter i. A. Dirk Stabenow
EU Declaration of Conformity
The manufacturer AUMA Riester GmbH & Co. KG declares herewith in sole responsibility, that the before mentioned
devices meet the essential requirements of the following directives. The following harmonised directives were applied:
RoHS Directive 2011/65/EU for versions (1), (2)
EN 50581:2012
EMC Directive 2014/30/EU for versions (1)
EN 61000-6-2:2005 / AC:2005 EN 61000-6-4:2007 / A1:2011
RED Directive 2014/53/EU for versions (2)
EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1
Furthermore, the before mentioned standards of the EMC Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU were applied.
Muellheim, 2020-02-01
Dr J. Hoffmann, CEO
This declaration is a translation of the German original and valid with electronic signature.
This declaration does not contain any guarantees and shall become void in the event of unauthorised modification of the devices.
Y009.042/003/en/1.20
SQ/SQR 05.2-14.2
Quality Control Plan (QCP) with AC 01.2
for part-turn actuators with actuator Controls - non-intrusive
Page 1 of
Final dient: