487906vard Promar
487906vard Promar
487906vard Promar
Technical Documentation
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sperre China
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 763 63 00 Tel +86 21 65070436
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 763 18 11 Fax +86 21 65070402
E-mail:industri@sperre.com E-mail:rotterdam@sperre.com E-mail:asia@sperre.com E-mail:china@sperre.com
Sole suppliers of genuine spare parts - www.sperre.com
LIST OF DRAWINGS
Output Installation
Rated power 15.0 kW Starting method DOL / Y-D
Power factor at FL (cosΦ) 0.86 Duty type S1
Efficiency at FL 91% Rotation (seen against shaft end) CW
Speed synchronous / FL 1800/1750RPM Wiring connection STAR
Cable entries 2 x ∅40mm
Suitable for cable diameter 22-32mm
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 67 63 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 67 63 18 11
E-mail: industri@sperre.com E-mail: rotterdam@sperre.com E-mail: asia@sperre.com
Partlist
Main voltage 690 V
Control voltage 220 V
Motor rated power 15 kW
Motor rated Current 17 A
Max rating of associated fuses 20 k A
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 763 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 763 18 11
E-mail:industri@sperre.com E-mail:rotterdam@sperre.com E-mail:asia@sperre.com
Data Sheet
Pressure switch PRS-30 Part no. 7756
Adjustable pressure switch
for control of compressor's START and STOP.
Range: 3,5 - 35 bar
Construction: Adjustment:
Pressure switch type ........ : Diaphragm Range of switching point ... : 3,5 - 35 bar
Fluids controlled.............. : Hydraulic oils, fresh water, (50,75 - 507,5 psi)
sea water, air Min. diff. at low setting ...... : 1,7 bar (24,65 psi)
Weight ............................. : 0.75 kg Min. diff. at high setting ..... : 2,55 bar (36,97 psi)
Max. diff. at high setting .... : 20 bar (290 psi)
Design: Installation:
Max temperature.............. : 70°C Fluid connection.................. : ¼" BSP
Max. permissible pressure : El. connector type ............... : DIN 43650A, 4-pin male,
Per cycle 45 bar (652,5 psi) plug PG11
Occasional surge 80 bar (1160 psi) Enclosure............................. : IP65
Destruction pressure ........ : 160 bar (2320 psi)
6 Ship approvals:
Mechanical life.................: 5 x 10 operating cycles
DNV, LRS, GL, BV, RINA
CE marked acc. to 89/336/EC, 92/31EEC, 93/68/EEC
PRESSURE SWITCH
Range
Plage
2000 290 20
PH
3500 508 35
N6
3
2000 290 20
2
1
900 130,5 9
PB
13
11
IEC/EN60 947-5-1
IP65IP65 1
PH- High setting point SPERRE Ui : 250V
14
12
AC15
www.sperre.com Ue : 240V
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 67 63 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 67 63 18 11
E-mail: industri@sperre.com E-mail: rotterdam@sperre.com E-mail: asia@sperre.com
Data Sheet
Temperature switch TMS-80 Part no. 7746
Adjustable temperature switch
for alarm indication and shut down of compressor
Alarm: S.P. 75°C, Shut down: S.P. 80°C
Construction: Performance:
Temperature switch type ............. : Rigid sensor Setting range ..................................: 50-100°C
Weight ......................................... : 0.35 kg Differential .....................................: 3°C
Permissible operating temp. ...........: 200°C
Environmental conditions:
Operation temperature ................. : -40 to +70°C Installation:
Enclosure ..................................... : IP65, IEC 529 Process connection.......................: ½" BSP
Vibration stability El. connector type ........................: DIN 43650A, PG11
Sinusoidal 20g, 25 Hz - 2 Hz ... : IEC 68-2-6
Shock resistance Material:
Shock 50 g/6 ms, 500 g/1 ms .. : IEC 68-2-27 Wetted Parts: Sensor pocket ...: Brass
Free fall ................................... : IEC 68-2-32 Enclosure Parts: Housing ...........: AlMGSi1
Plug fixture ......: Glass filled polyamid
Electrical specifications:
Switch.......................................... : SPDT Ship approvals:
Contact load: AC15 .................. : 0.5 A, 250 V DNV, ABS, LRS, GL, BV, RINA, MRS, KRS
DC13 .................. : 12 W, 125 V CE marked acc. to EN 60 947-5-1
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 67 63 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 67 63 18 11
E-mail: industri@sperre.com E-mail: rotterdam@sperre.com E-mail: asia@sperre.com
Data Sheet
Flexible hoses
1. 2. 3.
Hose construction :
Tube : Oil resistant synthetic rubber
Reinforcement : Two high tensile steel wire braids
Cover : Abrasion and weather resistant synthetic rubber
Temperatur range : - 40°C to + 100°C
Flexible hoses acc. to SAE 100 R2
Max. working press. 80 to 400 bar (Size dependent)
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sperre China
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 763 63 00 Tel +86 21 65070436
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 763 18 11 Fax +86 21 65070402
E-mail:industri@sperre.com E-mail:rotterdam@sperre.com E-mail:asia@sperre.com E-mail:china@sperre.com
Sole suppliers of genuine spare parts - www.sperre.com
List of recommended lub. oil
Issue date: 18.09.2006
Replace list of: 23.12.2004
Quantities, application points and intervals for lubrication oil and grease.
Air Lub. Oil for Air compressor Grease for El.motor
Compressor Quantity Application Change Quantity Grease Grease
type [Liters] point interval [Grams] Application interval
HLF2/77 1,8
HL2/77 4,0 Bearings lubricated for life time
and then after every 1000 hours of operation
HL2/90 4,0
HL2/105 4,0
After first 200 hours of operation,
HL2/120 10,0 20
HL2/140 10,0 20
HL2/160 10,0 20
HV1/85 1,5 20
Electric motor bearings
Crank case
HV1/120 2,0 20
HV1/140 * 4,0 20
HV1/156 * 4,0 20
HV2/200 8,0 30
HV2/210 8,0 30
HV2/219 8,0 30
HV2/220 20,0 30
HV2/240 20,0 30
HV2/270 24,0 30
HV2/285 24,0 30
HV2/300 24,0 30
* Cylinder lubrication from separate oil tank. (HV1/140A and HV1/156A does not have a separate cylinder
lubrication system, and these compressor models should be run on synthetic lub. oil only).
Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 763 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 763 18 11
E-mail:industri@sperre.com E-mail:rotterdam@sperre.com E-mail:asia@sperre.com