Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Cascade B

    Uploaded by

    pabloperezmtz1
    The document provides information about the Cascade auto-start controller from Murphy. It describes the features and specifications of the controller, which is designed for automatic start and stop control of engines in applications like pumps, compressors, and generators. It offers durability, compatibility with different engine types, and inputs/outputs to interface with engines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cascade B

    Uploaded by

    pabloperezmtz1
    21 views2 pages
    The document provides information about the Cascade auto-start controller from Murphy. It describes the features and specifications of the controller, which is designed for automatic start and stop control of engines in applications like pumps, compressors, and generators. It offers durability, compatibility with different engine types, and inputs/outputs to interface with engines.

    Original Title

    05195-Cascade-B

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about the Cascade auto-start controller from Murphy. It describes the features and specifications of the controller, which is designed for automatic start and stop control of engines in applications like pumps, compressors, and generators. It offers durability, compatibility with different engine types, and inputs/outputs to interface with engines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views2 pages

    Cascade B

    Uploaded by

    pabloperezmtz1
    The document provides information about the Cascade auto-start controller from Murphy. It describes the features and specifications of the controller, which is designed for automatic start and stop control of engines in applications like pumps, compressors, and generators. It offers durability, compatibility with different engine types, and inputs/outputs to interface with engines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    05195

    Revised 03-15-11
    Section 40 & 75

    Auto-Start/Stop Controller — Cascade


    Features
    • Durable encapsulated protection against
    dirt, water, and dust – rated NEMA4 and
    IP65
    • Operates during low battery blackouts
    • Compatible with Electronic and
    Mechanical engines – ECU, MPU,
    AC Frequency
    • J1939 Ready – Works directly with
    MurphyLink J1939 PowerView gages

    The Cascade controller offers automatic start and stop control with easy configuration for a broad number of applications.
    This auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and
    stop sequence. Pumps, Compressors, Grinders, Power Units and Generators are just few of the industrial applications for
    the controller.
    The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939
    engines, the controller will work with your application.
    Here are some of the unique features of the Cascade that only Murphy can offer at our competitive price.
    • Durability: Encapsulated to protect it against dirt, water and dust, along with a compression gasket to fully seal it to the
    panel. Cascade is rated NEMA4 and IP65.
    • Low Battery Blackouts: Operates in total blackout for a minimum of two seconds.
    • Compatibility: Accept MPU, AC Frequency and ECU speed signals and can operate with standard and J1939 engines.
    • Inputs and Outputs: The Cascade Inputs and Outputs are ruggedly protected and fault tolerant.
    • J1939 Ready: Works directly with Murphy’s J1939-ready PowerView gages, just plug and go, no sender is required.
    • CD101 Cascade Configuration Tool: Allows quick setup and loading of parameters into a Murphy standard Cascade
    via a PC software tool.
    Specifications
    Power input: 9-35VDC continuous - operates during total black- Outputs: 7 – 4 auxiliary, configurable (1A DC protected). 3 dedi-
    out for 2 seconds minimum. cated outputs for Crank, Fuel/ECU, Alternator excitation.
    Power consumption: Sleep Mode (Manual): 1mA typical; Sleep Crank attempts: 3, 5, 10, Continuous.
    Mode (Automatic): 4mA typical. Running Mode (Manual): Crank Rest: 5-60 seconds, adjustable.
    20mA typical; Running Mode (Automatic): 24mA typical. Shutdown lockout time delay: 5, 10, 15, 20, 25, 30 seconds.
    Operating/Storage temperature: -40 to 85°C; (-40 to 185°F). Crank disconnect speed setting: Field settable 0-9999 RPM
    Humidity: 0-100%, non-condensing. (16-60Hz AC freq input).
    Housing: UV stabilized black polycarbonate and epoxy encapsu- Overspeed/underspeed trip point setting: ±5 to 50% of nomi-
    lation. Weather tight and includes sealing gasket to keep nal.
    moisture and debris out of enclosure. Properly mounted con- Speed sensing inputs: Magnetic pickup (5-120VAC RMS / 0-10
    troller will maintain NEMA4 / IP65 rating of enclosure. kHz) & AC frequency (30-600VAC RMS / 16-80 Hz).
    Vibration: Rated to 6G. CANbus interface: Directly reads engine speed, & engine status
    Impact: Rated to 10G. data* from SAE-J1939 enabled engines.
    Inputs: Dedicated digital inputs for low oil pressure, high engine MODbus interface: In J1939 applications drives PVA series
    temperature, remote start, DC charge fail/Alternator fail. Two analog gages.
    aux inputs are configurable for multiple functions.

    *Engine status data limited to low oil pressure, high engine temperature, “Wait to start” status, Warning & Fault lamp information, and communication
    error.
    Cascade Auto-Start Controller Dimensions

    Front View Back View

    How to Order
    To Order specify: CD101 P/N 40700259
    Shipping Weight: 1 lb. (453 g) approximately.
    Shipping Dimensions: 5.1 x 6.7 x 1.6 inch (130 x 170 x 41 mm) approx.

    Accessories
    CD101 Cascade Configuration Kit P/N:40090045

    You might also like