Drip Irrigation Sasak-BOQ
Drip Irrigation Sasak-BOQ
Drip Irrigation Sasak-BOQ
0
S/No Item Description Units Qty Rate (Ksh) Total (Ksh)
Bill 1 Preliminaries and General
1.1.1 Allow for mobilization and Lump sum 1
demobilization of all
machineries, equipment and
personnel
1.2.1 Clear site of all trees (less than Lump sum 1
500mm diameter) bushes, shrubs
etc and dispose as specified by
the Engineer/Shown in the
drawing
1.3.1 Excavation/Earthwork-To Lump sum 1
include for all trimming to levels,
backfilling with approved
selected soil, compacting,
disposal of surplus materials and
reinstatement
1.4 Campsite and store
1.4.1 Construct a temporal campsite Lump Sum 1
for the contractors storage of
tools and materials and to act as
temporal office equiped with
daily occurrence book,visitors
book, engineers instruction
booklet.
1.5 Signboards
1.5.1 Provision, erection and No. 1
maintenance of project
signboards in accordance with
the technical specifications.
Bill 2 Risin main line from proposed borehole point to main reservoir location (Taken at
500 m)
Item Description Units Qty Rates (Ksh) Total (Ksh)
2.1.1 Excavation and backfilling in cm 5400 -
normal material (soft soils) of a
trench for mm dia pipe for depth
n.e 0.65 m and 0.45m width
BILL OF QUANTITIES FOR PROPOSED SASAK DRIP IRRIGATION PROJECT
Bill 3 On-farm Main lines (600 m of 50 mm diameter hdpe pipe), adaptors and related
accessories.
Item Description Units Qty Rates (Ksh) Total (Ksh)
3.1.1 Excavation and backfilling in Cm 1080
normal material of a trench for
50mm dia HDPE pipe for depth
n.e 0.6 m and 0.3m width
3.2.1 Procure, supply,deliver and place Rolls 12
100m rolls of 50 mm dia.hdpe
pipes complete with all the
coupling accessories
3.3.1 50 mm union No 12
3.4.1 50 mm gate valve No 12
3.5.1 50 mm end cap No 12
3.6.1 50 mm ball valve and accessories No 12
Bill 3 carried to summary Sub Total
Bill 4 Supply (23x20)m Open Field Drip Kit complete with all the adaptors and related
accessories for 1.1 ha
Item Description Units Qty Rates(Ksh) Total (Kshs)
Supply and installation of a 1.1 ha open drip kit that consits of 16mm dia drip lines of
length 20m connected to 23 m long 37.5 MM HDPE lateral capped at the end per block,
as per Engineer instruction.
4.1.1 16mm drip lines lm 1400
4.2.1 End drip caps fittings No 720
4.3.1 Rubber drip fitings No 720
4.4.1 Offtake connectors drip fittings No 720
4.5.1 50 MM Main screen filter No 1
4.6.1 Start connectors without rubber No 720
4.7.1 Start connectors with rubber No 720
4.8.1 16mmHDPE (PE pipes) lm 360
Bill 4 carried to summary Sub Total