FORBO Product Data Sheet (KT96CN Siegling)
FORBO Product Data Sheet (KT96CN Siegling)
FORBO Product Data Sheet (KT96CN Siegling)
Construction
Top face material Polyvinyl chloride
Surface structure Coarse texture
Coating thickness 0,3 mm
Colour Anthracite
Surface material driving face Polyester fabric
Surface structure Fabric
Colour Transparent
Tension member material Laterally flexible fabric of polyester
warp and weft
Number of fabric plies 2
Driving face weave Plain weave
Technical data
Total thickness 2,1 ± 0,1 mm
Weight 2,35 kg/m²
k1% value relaxed (Effective pull at 4 N/mm
1% elongation), established in line
with ISO 21181:2005
Friction coefficient of driving face 0,2
against steel panel (according
internal test standard)
Permissible operating temperature -10/+70 Cº, for a short time 90 Cº
Hardness of top face coating as per 70
DIN 53505 (Shore A)
Electrostatic antistatic: the electrical resistance of an
internal fabric or intermediate layer is <
3x10^8 ohms. Measurement according
to ISO 21178.
Properties
Lateral stiffness Laterally flexible
Troughable Yes
Suitable for accumulation No
Inclined conveying Yes
Suitable for knife edges No
Suitable for curves Yes
Flame-retardant Flame-retardant according to EN
20340/ISO 340 and ASTM 378-D
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23°C/73°F, 50% relative humidity) in accordance with DIN 50014/ISO Siegling - total belting solutions
554. Fluctuations in climate can cause variations. See our brochure “Technical Information 1” no. 317 which shows
the types of belts that can be supplied and the manufacturing tolerances. Customised types require written 1/2
confirmation.
Product NP 6784 (E 12/2 0/V3 GSTR-C-SE
Data Sheet anthracite)
Noise development Normal
Belt support Slider bed (support rollers possible)
Food properties
Not certificated for the transport of
unpacked food according (EU) 10/2011
and (EC) 1935/2004, FDA 21CFR or
MHLW 370.
Fabrication
Belt edge sealing Smartseal
Especially suitable for corrugated No
side walls
Profiles on Underside Yes
Profiles on Topface Yes
Mechanical fasteners KS(S)
Remarks
Chemical resistance V
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23°C/73°F, 50% relative humidity) in accordance with DIN 50014/ISO Siegling - total belting solutions
554. Fluctuations in climate can cause variations. See our brochure “Technical Information 1” no. 317 which shows
the types of belts that can be supplied and the manufacturing tolerances. Customised types require written 2/2
confirmation.