BN 33042
BN 33042
BN 33042
BN 33042
Additional information Supply possibilities for fine threads and other types of threads on request
Material type A4
Notes on use
Functional principle To ensure safety, do not exceed the load capacities specified in the table when using a single eye bolt or two eye
bolts at horizontal angle greater than 45 degrees.
The working load limits specified in the chart require that:
- the lifting eye bolt is completely screwed in
- blind holes are drilled so deeply that the lifting eye bolt can be tightened to the bearing surface
- the threaded stud hole depth is sufficient so that the lifting eye bolt can be tightened to the contact surface
- the thread depth is sufficient
- the lifting eye bolt has to bear the induced forces without deformation
Recommendations: Before placing the lifting eye bolt into use, ensure correct seating and check for damage (eng.
corrosion, cracking, beat traces, deformation).
Eye bolts with obvious damage should not be used.
Warnings Products are subject to the relevant security requirements in use as load suspension devices. The mounting
instructions and loads must be observed.
Article no. d1 h L d3 d2 d4 k
5818630 M8 36 13 36 20 20 8
5818640 M10 45 17 45 25 25 10
5818650 M12 53 20,5 54 30 30 12
5818660 M16 62 27 63 35 35 14
5818670 M20 71 30 72 40 40 16
5818680 M24 90 36 90 50 50 20
5818690 M30 109 45 108 65 60 24