Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Cycoloy Resin C1200 Americas: COMMERCIAL: Property

    Uploaded by

    marcelo
    This document describes the properties and processing parameters of Cycoloy Resin C1200, a PC+ABS resin. It has excellent impact resistance and high heat resistance, making it suitable for automotive, appliance, and electrical components. The resin has good tensile strength and flexibility at low temperatures. Processing guidelines are provided for injection molding the resin, including recommended drying, melting, and mold temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cycoloy Resin C1200 Americas: COMMERCIAL: Property

    Uploaded by

    marcelo
    36 views2 pages
    This document describes the properties and processing parameters of Cycoloy Resin C1200, a PC+ABS resin. It has excellent impact resistance and high heat resistance, making it suitable for automotive, appliance, and electrical components. The resin has good tensile strength and flexibility at low temperatures. Processing guidelines are provided for injection molding the resin, including recommended drying, melting, and mold temperatures.

    Original Description:

    datasheet

    Original Title

    C1200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the properties and processing parameters of Cycoloy Resin C1200, a PC+ABS resin. It has excellent impact resistance and high heat resistance, making it suitable for automotive, appliance, and electrical components. The resin has good tensile strength and flexibility at low temperatures. Processing guidelines are provided for injection molding the resin, including recommended drying, melting, and mold temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views2 pages

    Cycoloy Resin C1200 Americas: COMMERCIAL: Property

    Uploaded by

    marcelo
    This document describes the properties and processing parameters of Cycoloy Resin C1200, a PC+ABS resin. It has excellent impact resistance and high heat resistance, making it suitable for automotive, appliance, and electrical components. The resin has good tensile strength and flexibility at low temperatures. Processing guidelines are provided for injection molding the resin, including recommended drying, melting, and mold temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Cycoloy* Resin C1200 Americas: COMMERCIAL

    PC+ABS, excellent impact/high heat resistance. Low temperature ductility. For automotive, appliance and electrical components.

    Property

    TYPICAL PROPERTIES (1)


    MECHANICAL Value Unit Standard
    Tensile Stress, yld, Type I, 50 mm/min 60 MPa ASTM D 638
    Tensile Strain, yld, Type I, 50 mm/min 5 % ASTM D 638
    Tensile Strain, brk, Type I, 50 mm/min 150 % ASTM D 638
    Tensile Modulus, 50 mm/min 2270 MPa ASTM D 638
    Flexural Stress, yld, 1.3 mm/min, 50 mm span 88 MPa ASTM D 790
    Flexural Modulus, 1.3 mm/min, 50 mm span 2340 MPa ASTM D 790
    IMPACT Value Unit Standard
    Izod Impact, notched, 23°C 640 J/m ASTM D 256
    Izod Impact, notched, -30°C 534 J/m ASTM D 256
    Instrumented Impact Energy @ peak, 23°C 61 J ASTM D 3763
    Instrumented Impact Energy @ peak, -30 61 J ASTM D 3763
    THERMAL Value Unit Standard
    HDT, 0.45 MPa, 3.2 mm, unannealed 129 °C ASTM D 648
    HDT, 1.82 MPa, 3.2mm, unannealed 112 °C ASTM D 648
    CTE, -40°C to 40°C, flow 7.2E-05 1/°C ASTM E 831
    Vicat Softening Temp, Rate B/50 130 °C ISO 306
    Relative Temp Index, Elec 105 °C UL 746B
    Relative Temp Index, Mech w/impact 80 °C UL 746B
    Relative Temp Index, Mech w/o impact 105 °C UL 746B
    PHYSICAL Value Unit Standard
    Specific Gravity 1.15 - ASTM D 792
    Mold Shrinkage, flow, 3.2 mm 0.5 - 0.7 % SABIC Method
    Melt Flow Rate, 260°C/5.0 kgf 11.4 g/10 min ASTM D 1238
    ELECTRICAL Value Unit Standard
    Hot Wire Ignition {PLC) 3 PLC Code UL 746A
    High Ampere Arc Ign, surface {PLC} 1 PLC Code UL 746A
    Comparative Tracking Index (UL) {PLC} 2 PLC Code UL 746A
    FLAME CHARACTERISTICS Value Unit Standard
    UL Recognized, 94HB Flame Class Rating (3) 1.19 mm UL 94
    CSA (See File for complete listing) LS88480 File No. CSA LISTED
    Source GMD, last updated:01/05/2000
    Processing

    Parameter
    Injection Molding Value Unit
    Drying Temperature 105 - 110 °C
    Drying Time 3-4 hrs
    Drying Time (Cumulative) 8 hrs
    Maximum Moisture Content 0.04 %
    Melt Temperature 275 - 300 °C
    Nozzle Temperature 275 - 300 °C
    Front - Zone 3 Temperature 260 - 300 °C
    Middle - Zone 2 Temperature 255 - 295 °C
    Rear - Zone 1 Temperature 250 - 290 °C
    Mold Temperature 60 - 90 °C
    Back Pressure 0.3 - 0.7 MPa
    Screw Speed 40 - 70 rpm
    Shot to Cylinder Size 30 - 80 %
    Vent Depth 0.038 - 0.076 mm
    Source GMD, last updated:01/05/2000
    • NOTE: Back Pressure, Screw Speed, Shot to Cylinder Size and Vent Depth are only mentioned as general guidelines.
    These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist
    molding.

    THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

    PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION

    (1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
    storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
    samples. All samples tested under ISO test standards are prepared according to ISO 294.
    (2) Only typical data for selection purposes. Not to be used for part or tool design.
    (3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
    (4) Internal measurements according to UL standards.

    Disclaimer : THE MATERIALS AND PRODUCTS OF THE BUSINESSES MAKING UP THE SABIC INNOVATIVE
    PLASTICS COMPANY, ITS SUBSIDIARIES AND AFFILIATES ("SABIC IP"), ARE SOLD SUBJECT TO SABIC IP' S
    STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER
    SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND
    AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED
    HEREIN IS GIVEN IN GOOD FAITH, SABIC IP MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED,
    (I) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (II) AS TO
    THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SABIC IP MATERIALS, PRODUCTS,
    RECOMMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN SABIC IP' S STANDARD CONDITIONS OF SALE,
    SABIC IP AND ITS REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS RESULTING
    FROM ANY USE OF ITS MATERIALS OR PRODUCTS DESCRIBED HEREIN. Each user bears full responsibility for making its
    own determination as to the suitability of SABIC IP' s materials, products, recommendations, or advice for its own particular use. Each
    user must identify and perform all tests and analyses necessary to assure that its finished parts incorporating SABIC IP materials or
    products will be safe and suitable for use under end-use conditions. Nothing in this or any other document, nor any oral recommendation
    or advice, shall be deemed to alter, vary, supersede, or waive any provision of SABIC IP' s Standard Conditions of Sale or this Disclaimer,
    unless any such modification is specifically agreed to in a writing signed by SABIC IP. No statement contained herein concerning a
    possible or suggested use of any material, product or design is intended, or should be construed, to grant any license under any patent or
    other intellectual property right of SABIC Innovative Plastics Company or any of its subsidiaries or affiliates covering such use or design,
    or as a recommendation for the use of such material, product or design in the infringement of any patent or other intellectual property right

    * Cycoloy is a trademark of the SABIC Innovative Plastics Company

    © 1997-2008 SABIC Innovative Plastics Company.All rights reserved

    You might also like