Type 13 Ds Jan18
Type 13 Ds Jan18
Type 13 Ds Jan18
Data Sheet
Features Summary
• Conical spring
• 'O'-Ring Mounted
• Shaft direction dependant
• Stainless Steel head retainer
Simple but effective, the economical design makes this Pressure: Up to 12 bar (174 psi)
Seal suitable for a wide variety of lighter and general duty
applications. Important: These limits are the theoretical elastomer
or design limitations. For maximum theoretical operating
pressure for your specific size and application please refer
to calculation sheet within this data sheet. All performance
information given is for guidance only and is dependent on
material, operating and application factors that affect Seal
performance.
2 5 3
L2 L1
D1 D3
DØ 1 2 4
Dimensional Data
Metric Shaft
Size Code D1 D3 L1 L2
Size DØ
10 0100 18.10 19.50 15.00 5.50
11 0110 20.60 22.00 18.00 5.50
12 0120 20.60 22.00 18.00 5.50
13 0130 23.10 24.00 22.00 6.00
14 0140 23.10 24.00 22.00 6.00
15 0150 26.90 26.00 22.00 7.00
16 0160 26.90 26.00 23.00 7.00
17 0170 26.90 26.00 23.00 7.00
18 0180 30.90 32.00 24.00 8.00
19 0190 30.90 32.70 25.00 8.00
20 0200 30.90 32.70 25.00 8.00
21 0210 35.40 36.00 25.00 8.00
22 0220 35.40 36.00 25.00 8.00
23 0230 35.40 36.00 27.00 8.00
24 0240 35.40 37.40 27.00 8.00
25 0250 38.20 38.00 27.00 8.50
28 0280 43.30 42.00 29.00 9.00
30 0300 43.30 44.00 30.00 9.00
32 0320 43.30 45.50 30.00 9.00
33 0330 53.50 46.50 39.00 11.50
35 0350 53.50 49.00 39.00 11.50
38 0380 60.50 56.00 39.00 11.50
40 0400 60.50 58.00 39.00 11.50
Based on Carbon vs Reaction Bonded Silicon Carbide
Based on Ceramic vs Carbon