TML-704

Mobile Maintenance Lift

Self propelled work platform has 2,000 lbs.
(909 kg) lift capacity—16' or 30' lift height
• Ramp-proven design
GSA: GS-07F-0558Y
• Lifts up to 2,000 lbs.
kg) distributed loads

• Clears 65 in. (165 cm).

Platform elevates to
16 or 30 ft. (488 or
914 cm)

• Modular engine-
transmission
simplifies maintenance
and repair

• Single scissors lift

features heavy-duty,
rectangular tubular
steel construction

Gets up and under

NMC-WOLLARD Mobile
Maintenance Lift has elevating
work platform height to 16 ft.
(488 cm). Gives workers repair
access to most aircraft. Lift
height in low profile travel
mode is only 43 in. (109 cm).

Quick access
Maneuverable self propelled lift
gets to and from aircraft quickly
with 20 mph top speed (32 km/hr.).
Has 109.25 sq. ft. (10.15 sq.
meters) platform area. Gives access to broad working areas of wings, tail sections and fuselage without need to
reposition unit. Large 216” x 88” platform (533 cm x 208 cm) is ideal for multiple technicians and power tools. High
capacity. Lifts to 2,000 lbs. (909 kg) distributed loads — up to 500 lbs. (227 kg) concentrated loads. Hydraulic stabilizers
allow full capacity at full extension. Stabilizers deploy on lift, retract on travel.
TML-704
Mobile
Maintenance Lift
Specifications subject to change
without notice. Photos and illustrations
may show optional equipment

Platform: Power options include: Hydraulic System:

High strength structural steel frame with Gas: Kubota or Ford Lift Cylinder............................. single-stage
aluminum gripstrut deck LP with check valve to prevent accidental
Diesel: Cummins, Kubota or Deutz descent.
Platform Height: Electric: AC Valves.......electrically actuated, solenoid
Adjustable between a minimum of 43” Consult factory for details. Pump..................................engine driven
(109 cm) and a maximum of 16’ (488 cm) Pressure...........1,800 psi max. (138 bars)
Transmissions: Filter, on return line................ 10 microns
Platform Size: Standard: GM 4L70E Strainer, on suction line............. 80 mesh
Overall 17’ 6” (533 cm) x 6’ 10" (208 cm) Optional: Ford C-6. Single lever shift Hydraulic tank: aluminum with sight
control with detented F-N-R gauge and breather cap
Working Space:
Same as platform less cutout 4’ 6” Drive Axle: Instrument Panel:
(137 cm) long and 2’ 3.5” (70 cm) wide Heavy duty 3,300 lbs. (1,500 kg) capacity LED warning indicators: volts, oil, coolant,
at front left corner driver’s area. Total rigid mounted to frame brakes
working area: 109.25 sq. ft. (10.15 sq. Switches...............running lights, front
meters). Steering Axle: spotlight, engine heat for cold start
Heavy duty 6,000 lbs. (2722 kg) capacity, Hourmeter.......to accumulate running time
Platform Capacity: rigid mounted to frame Fuel Gauge
2,000 lbs. (909 kg) total uniformly distrib-
uted load or 500 lbs. (227 kg) maximum Tires:.....................................ST225/75D15 Shipping Dimensions:
concentrated load on any one quadrant. Length.............................216 in. (549 cm)
Brakes: Width................................88 in. (224 cm)
Facilities on Platform: System.................. 4-wheel split cylinder Height...............................65 in. (165 cm)
LED floodlights/worklights (customer Front..........................................disc type Weight......................7,420 lbs. (3,366 kg)
specified). Engine ignition, emergency Rear..........................................drum type
pump and platform raise/lower switches. Parking............................. Orscheln lever Optional Items available upon request:
Rubber bumpers around full perimeter of LED amber strobe/clearance light
platform. Guardrails all around with access Electrical System: Back-up alarm
gate. Type...................12 VDC negative ground Fire extinguisher
Alternator..............................min. 60 amp Safety shutdown
Emergency Platform System: Battery.............................4D-3, 900 CCA Gauge package
The platform can be raised or lowered LED turn signals
from the operator compartment or plat- Fuel System: On board charger 120 VAC/230 VDC
form in case of engine failure by utilizing a Fuel Tank: aluminum, vented cap Fall protection system
battery-powered auxiliary pump. and 22 gal. (83L) capacity. Folding safety rail system
Diesel: fuel filter/water separator. Fluid capture system
Chassis: Fuel Gauge: on instrument panel. Engine cover
Frame..................... high strength tubular ANSI handrail platform
Wheelbase......................130 in. (330 cm) Cooling System: 30 ft. height option (704H)ß
Wheeltrack...........front: 71.3 in. (181 cm) Matched to engine requirements
rear: 67 in. (170 cm)
Vehicle Speed............20 mph (32 km/ hr) Steering System:
Turning Radius.....................22 ft. (6.7 m) Eaton power steering control with a
Ground Clearance.............5.5 in. (14 cm) single-stage hydraulic cylinder.
Stabilizers......................4-point hydraulic 2021 Truax Blvd, Eau Claire, WI 54703
Phone: 800-656-6867
Phone: 715-835-3151
Fax: 715-835-6625
Email: bsteingart@nmc-wollard.com
Website: www.nmc-wollard.com 10/16