2022 1 4 20DT+12V喷油器清洗机 - 1650262347011
2022 1 4 20DT+12V喷油器清洗机 - 1650262347011
2022 1 4 20DT+12V喷油器清洗机 - 1650262347011
Exchanging machine
Operating instructions
Model : ATF-20DT
(12V)
Please read the manual carefully before operation
Description: Exchange and drain automobile transmission oil, clean the transmission system.
DISCLAIMER: Information, illustrations, and specifications contained in this manual are based on the latest
information available at the time of publication. The right is reserved to make changes at any time without
obligation to notify any person or organization of such revisions or changes. Further, producer shall not be liable
for errors contained herein or for incidental or consequential damages (including lost profits) in connection with
the furnishing, performance, or use of this material. If necessary, obtain additional health and safety information
from the appropriate government agencies, and the vehicle, refrigerant, and lubricant manufacturers.
Content .............................................................................................................................................................. 1
Warnings ............................................................................................................................................................ 2
Accessoires........................................................................................................................................................ 3
Maintenance ...................................................................................................................................................... 6
Warranty card..................................................................................................................................................... 7
1
9. The professional maintenance personnel must be
Important Safety Information's sure that there is no pressure in the pipeline during
the maintenance of the machine
This equipment is designed to be operated by 10. When the machine works, the operator must look
qualified and trained personnel. Which should have at the machine at all times and do the
enough knowledge of auto transmission repair & corresponding operation in time.
11. The recommended service life of the machine is
maintenance. It should only be operated after reading
six years.
and understanding the safety warnings and operating 12. The scrapping of the machine needs to be dealt
procedures in this instruction manual and the with by the relevant departments in accordance
vehicle’s service manual. with the local laws and regulations.
When using tool, basic safety precautions should
always be followed to reduce the risk of personal
Warnings
injury and damage to equipment.
The unit is extremely simple and reliable in selecting
ALLOW ONLY QUALIFIED PERSONNEL
and performing all its functions. Therefore, the user
TO OPERATE THE UNIT. Before operating the
is not exposed to any risk, if the general safety
unit, read and follow the instructions and warnings in
guidelines reported below are followed, in
this manual. The operator must be familiar with air
association with proper use and maintenance of the
conditioning and refrigeration systems, refrigerants,
unit (improper use and maintenance will reduce the
and the dangers of pressurized components. If the
safety of the unit).
operator cannot read this manual, operating
1. Checking the unit always before operation. Avoid
instructions and safety precautions must be read and
working process without enough oil or with bad
discussed in the operator’s native language.
quality oil.
PRESSURIZED TANK CONTAINS LIQUID
2. Keep all soft tubes/hoses away from hot parts and
REFRIGERANT. Do not overfill the internal
rotating elements, such as: cooling fans, radiators
storage vessel, because overfilling may cause
and etc.
explosion and personal injury or death. Do not
3. Checking power switch under normal working
recover refrigerants into nonrefillable containers; use
condition or not.
only federally authorized refillable containers
4. Polluted transmission oil is avoided from adding
HOSES MAY CONTAIN LIQUID
into the transmission system.
REFRIGERANT UNDER PRESSURE.
5. Warning: The warnings, cautions, and instructions
Handle refrigerant with care as serious injury may
discussed in this instruction manual cannot cover
occur. Wear protective equipment, including safety
all possible conditions and situations that may
goggles, rubber gloves.
occur. It must be under-stood by the operator that
common sense and caution are factors which DO NOT USE AN EXTENSION CORD. An
extension cord may overheat and cause fire. If you
cannot be built into this product, but must be
must use an extension cord, use the shortest
supplied by the operator.
possible cord with a minimum size of 14 AWG.
6. Do not use external tanks or other storage tanks
that have not been type-approved or lack safety TO REDUCE THE RISK OF FIRE, do not use
valves. the unit in the vicinity of spilled or open
7. Do not leave power supplied to the unit unless the containers of gasoline or other flammable
unit is going to be used immediately. Cut off the substances.
electrical power supply prior to long intervals in DO NOT USE COMPRESSED AIR TO
which the unit will not be used. PRESSURE TEST OR LEAK TEST THE
8. All of the flexible hoses may contain transmission oil UNIT OR TRANSMISSION SYSTEM.
under high pressure.
2
HORIZONTAL HOLD. During operation, the
device must be on a level, flat surface so that the Product description
measurement can be made correctly
1. Functions:
Protect the device against rain Do not expose 1.1. Auto transmission system cycle cleaning
this machine to direct sunlight or rain. Used 1.2. Auto transmission oil exchanging
in a well ventilated area 2. Appearance description
Accessoires
3
3.2. Disconnect an ATF oil pipe that is convenient for
Operation instructions disassembly and assembly on the car.
3.3. Find suitable connectors from the box and
1. Prepare for the first time to use. connect the red and blue oil pipes to the two ends
1.1. Check the accessories whether they are of the removed oil pipe respectively.
missing/damaged or not.
1.2. Fill up new transmission oil into the new oil
tank, keep the waste oil bottle empty.
2. Fill up oil from external tank
2.1. Insert the transparent connecting tube into the
new external oil drum and point the switch "valve
1" to the "Exchanging" position, and switch "valve
2" to the "Extracting" position).
4
machine's valve 1 to "Exchanging" position,
and valve 2 points to "Exchanging" position.
Start the engine, when oil flows through the old
oil window, turn on the power switch in hurry to
inject new oil into the transmission,and the
automatic gearbox starts to exchange used oil
and new oil.
Warning:
1. Pay attention to the correct connection method of
the pipes;
2. Pay attention to whether the joints are leaking. If
there is any leakage, stop the machine and reinstall
it;
3. If you find that the system is working abnormally,
use the Emergency stop switch to stop the machine
and check immediately, contact the dealer to solve
4.1. After the cycle cleaning is over, Point the
the problem for you..
5
Maintenance 1.3. Connect a connector at the end of the oil outlet
pipe, turn on the power switch to drain the waste
1. Drain waste oil from the equipment oil.
1.1. Point the valve 1 to the "Exchanging" position,
2. Replace the filter
and valve 2 to "Extracting " position. When the oil change volume reaches 100L, the filter
should be replaced for better oil change effect.
1. Make sure there is no pressure in the pipe before
replacing the filter.
2. Rotate to remove the filter and install a new filter.
6
Adapter Kit Packing List
Serial No. Picture Quantity Serial No. Picture Quantity
A1 1 A16 2
A2 1 A17 1
A3 1 A18 1
A4 1 A19 3
A5 1 A20 1
A7 1 A21 1
A10 1 A22 1
A11 1 A23 1
A12 1 A23-2 1
A13 1 Pipe 6
A14 1 Clips 2
A15 1
7
WARRANTY CARD
USERS NAME:
USERS TEL:
PURCHASING DATE:
DISTRIBUTOR:
DISTRIBUTOR ADDRESS:
DISTRIBUTOR TEL: