AQU4518R24
AQU4518R24
AQU4518R24
Vertical Polarization V
Fixed Electrical Downtilt 5°
2954 mm
736 349
7°
10
Subject to alteration.
dB
3
Mechanical 736 349 738 664
0 specifications
Vertical Pattern Input 7-16 female 7-16 female
5° electrical downtilt Connector position Bottom Top
Weight 8 kg
936.1100/f
Radome diameter 51 mm
Wind load 210 N (at 150 km/h)
Max. wind velocity 200 km/h
Packing size 3316 x 148 x 112 mm
Height 2954 mm 2856 mm
Mounting: The antenna can be attached laterally at the tip of a tubular mast of
50 – 94 mm diameter with two U-bolt brackets supplied with the antenna um
maximtop
(connecting cable runs outside the mast). mast
230
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
150
Solid, reliable construction: Omnidirectional antennas are often installed at exposed sites on
the top of masts, so special attention has been paid to their mechnical
construction.
The exceptionally stiff fiberglass tube with low tip deflection will withstand
wind velocities of up to 200 km/h.
104
Anti-static protection: All metal parts of the antenna as well as the supplied clamp attachment
are grounded. The inner conductor is capacitively coupled.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-
mental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
Subject to alteration.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by
oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.
These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
936.1100/f
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.