HO PLUS 32-PLUS 46 - Hydraulic Oil (HEES)
HO PLUS 32-PLUS 46 - Hydraulic Oil (HEES)
HO PLUS 32-PLUS 46 - Hydraulic Oil (HEES)
TECH NICAL D
L U BRIC ANTS
B I O -
HO PLUS 32 / PLUS 46
HYDRAULIC OIL – HEES
(Specification: ISO 15380)
Description
Hydraulic oil PLUS is a high performance fully synthetic hydraulic oil from mixture of saturated and unsaturated
esters. Hydraulic oils PLUS has a great lubricity characteristics, excellent thermooxidation stability and perfect cold-
exposure properties. It also provides a great temperature range performances. Enables a long oil change interval
(extended lifetime filling interval).
Areas of Application
Hydraulic oil PLUS is designed for hydrostatic and hydrodynamic mechanical parts of machines and machinery. The
ready biodegradability and non-toxic nature of these products make this hydraulic oil an excellent choice where
leakage or spillage could enter environmentally sensitive areas (forestry works, hydroelectrics stations, earth-moving
industry, agriculture industry etc.)
Characteristic features:
• Great lubrication performances
• Perfect anti-wear propertiest
• Non-toxic
• Great cold-exposure properties
• Excellent thermooxidation stability
• Easily biodegradable
• Good compatibilty with sealing materials, paints and hose
• Great protection against rust and corrosion
• Excellent wide temperature range performances
• With non-foaming additives
Synthetic esters
• Synthetic esters are made from organic acids and alcohols
• Originally formulated as a replacement for triglycerides, they perform better in nearly every performance criteria
• Work better at both higher and lower temperatures
• Low volatility and a higher lubricity all while maintaining high levels of biodegradability
CZ/027/001
B RICA NTS
BIO - L U
Viscosity 40°
C ASTM D445 mm2/s 32 46
Viscosity 100°
C ASTM D445 mm2/s 6,7 9,4
VI ASTM D 2270 165 187
Density (15 °
C) ASTM D 4052 g/cm 3
0,965 0,921
Flash point COC ASTM D92 °
C >260 >260
Pour point ASTM D97 °
C <-35 <-35
ASTM D 664
Total Acid Number (TAN) mg KOH/g ≤1 ≤1
/ASTM D 974
Water content ASTM D 4928 % ≤ 0,01 ≤ 0,01
Foam Seq. 1/2/3 ASTM D 892 ml/ml 0/0/0 0/0/0
Air release 50°
C ASTM D 3427 min 3 3
Copper corrosion (3h/100°
C; 24h/100°
C) ASTM D 130 rating 1a/1a-1b 1a/1a-1b
Steel corrosion Procedure A (distilled water);
ASTM D 665 rating pass;pass pass;pass
B (synthetic sea water)
AW - Four Ball Tests (1500 rpm/1h/300N) ASTM D 4172 mm <0,4 <0,4
FZG Gear Test A 8.3/90 (visual) - damage load stage DIN 51354, part 2) rating >12 >12
RVPOT (150°
C, H2O, 02, Cu Catalyst) - life time ASTM D 2272 min 465 511
Vickers vane pump test type V 104-C (DIN 51389, part 2) UNIT ISO VG 32 ISO VG 46
The above-listed data represent average values. They are intended as a guide to facilitate handling and cannot be regarded as
specified data.