ANGLAMOL® 6085U AUTOMOTIVE GEAR OIL

A multipurpose performance additive for formulating both automotive and industrial gear oils.

Anglamol 6085U is a universal gear oil additive formulated for use in automotive axles,
non-synchronized transmissions and key global industrial gear oil applications

FEATURES AND BENEFITS

Demonstrated reliable performance through field trials

Ideal for service fill applications

APPLICATIONS AND CREDENTIALS

Product Performance Recommended Treat Rate of ANGLAMOL® 6085U

5.00% by weight 2.50% by weight 1.50% by weight

API GL-5 M - -

MIL-L-2105D M - -

ZF TE-ML 07A S - -

ZF TE-ML 08 S S -

API GL-4 - S -

AGMA 250.04 - - M

API GL-3 - - S

DIN 51517 PART 3 - - M

MAG IAS Milacron - - M

U.S. Steel 224 - - M

* All Lubrizol product performance claims are only applicable when the additive package is used with defined base oil(s), viscosity modifier(s) and
other required components to produce the applicable viscosity grade in a properly blended finished fluid.

¹ - Volume treatment rates are approximate as the actual treat rate is dependent on the density of all components in a blend
A - Approved-Formal written approval provided from a governing body such as an OEM, regulatory agency or an industry organization
L - Licensable-Licensable against an active API category
M - Meets-All required testing meets defined specification requirements; however, no formal approval provided, claim is self-certified
S - Suitable for Use (SFU) - Considered suitable for use based on laboratory testing, field testing and engineering judgment (where there is no
regulatory prohibition)

Published on 14 Jan, 2020 Product Data Sheet Page 1 of 3

ANGLAMOL® 6085U

TYPICAL CHARACTERISTICS²

Characteristic Typical Value Unit Method

Physical State Liquid - -

Form Liquid - -

Color/Appearance Amber - -

Odor Strong - -

NITROGEN 0.73 % LZ Test Method

PHOSPHORUS 1.27 % LZ Test Method

SULFUR 28.9 % LZ Test Method

FLASH POINT, C, PMCC 80 °C ASTM D 93

SPECIFIC GRAVITY @ 15.6 C 0.973 SPGRAV ASTM D 1298

VISCOSITY @ 100 C, CST 2.6 CST ASTM D 445

VISCOSITY @ 40 C, CST 9.3 CST ASTM D 445

²Not a manufacturing specification

UNLOADING, STORAGE AND BLENDING INSTRUCTIONS

General Handling Instructions

In general, The Lubrizol Corporation recommends, as a minimum, the use of neoprene or nitrile rubber gloves and safety glasses
or chemical splash goggles. The Safety Data Sheet should be consulted for specific information and for information on health and
safety when handling this product.

Fire and Explosion Hazard Data

Flash Point (method) Classification

80°C PMCC Combustible

Temperature Recommendations

Unloading

Pumping Temperature Ambient

Maximum Temperature 60°C 140°F

Storage

Maximum Temperature for Long-term Storage 45°C 113°F

Blending

Maximum Base Oil Temperature for Mechanical or in-line Mixing 60°C 140°F

Equipment Recommendations

Type of Pump Centrifugal

Type of Transfer Line Ball Launched, Insulated

Transfer Line Size 2-3inch/5-8 cm.

Heat Source

Type n/a

Storage Tank

Published on 14 Jan, 2020 Product Data Sheet Page 2 of 3

ANGLAMOL® 6085U

ADDITIONAL RECOMMENDATIONS

* Holding the material in excess of this temperature may cause chemical degradation. Use steam for heating and tracing only
when the material is in motion to avoid localized overheating. Cold Temperature Storage - If product has been stored below its pour
point temperature it should be heated to 21°C/70°F before using.

Published on 14 Jan, 2020 Product Data Sheet Page 3 of 3