RG-AP810-I

Wi-Fi 6 Dual-radio Indoor

Access Point

Scan QR Code
For More Enquiry
 Product Pictures

Product Overview
The RG-AP810-I is a Wi-Fi 6 wireless access point that integrates dual radios, high performance, and enterprise-
grade encryption technology. Due to the hybrid cloud management mode and high-density access design, it
is suitable for flexible deployment in high-quality network scenarios, such as classroom, dormitory, and office
scenarios in the education industry, production workshop and warehouse scenarios in the manufacturing
industry, outpatient clinics and mobile ward rounds scenarios in the medical industry, boutique hotels, and
retail shops.

-1-
 Product Highlights

Cost-effectiveness Intelligent High Security

and High Speed networking and Reliability

Cost-effectiveness and High Speed IEEE 802.11k/v/r support and roaming stickiness
optimization, achieving seamless user roaming
Dual-band design (2.4 GHz + 5 GHz), four spatial Rich IoT features: PoE power, Bluetooth 5.1, support for
streams, 1024-Quadrature Amplitude Modulation iBeacon, and wireless locating
(QAM) high-speed access, and up to 1.775 Gbps
peak data rate, realizing high-speed wireless access High Security and Reliability
experience
Orthogonal Frequency-Division Multiple Access Encryption and authentication technologies including
(OFDMA), Multi-User Multiple-Input Multiple-Output Wi-Fi Protected Access 3 (WPA3), enhanced open
(MU-MIMO), and Wi-Fi Multimedia (WMM), increasing security, 802.1X, and Private Pre-shared Key (PPSK),
the average rate per user in high-density deployment enhancing data security
environments Dynamic Frequency Selection (DFS), optimizing the
RF power adjustment and intelligent channel allocation use of available RF spectrum to prevent radar channel
to solve the problems such as co-channel interference interference
and adjacent channel interference, thereby improving Cyclic Delay/Shift Diversity (CDD/CSD), Maximum Ratio
network transmission efficiency and stability Combining (MRC), Space-Time Block Coding (STBC),
and Low-Density Parity Check (LDPC), improving the

Intelligent networking signal quality, signal receiving, and reliability and

performance of data transmission
Local and cloud management modes, and intelligent Transmit beam-forming (TxBF) expands the signal
wireless network optimization, reducing TCO and coverage and enhances the reliability of specific
maximizing ROI devices, thereby improving the data rate
Intelligent power monitoring, which monitors PoE Intelligent identification and monitoring, multicast-
output power and disables or enables some functions to-unicast conversion, and other features, enhancing
according to the available power to ensure normal network security and reliability
operation of the AP

-2-
 Applicable Scenarios
Higher Education medical information through smart devices online,
resulting in improved satisfaction.
Classroom and Lab
Deploying Wi-Fi in classrooms and labs enables students
and teachers to access network resources with ease, thereby
enhancing the quality of teaching and learning. Students
can engage in online learning, access course materials,
and collaborate with classmates, while teachers can access
teaching resources and deliver multimedia lessons.

Remote Monitoring and Management of Medical Devices

With Wi-Fi deployment, remote monitoring and management
of medical devices become possible. Wireless medical
devices such as ECG monitors and blood pressure monitors
can transmit patient data in real time, thereby improving
information security. Additionally, these wireless medical
devices can be easily maintained and upgraded, resulting in
cost reductions.

Library
Wi-Fi deployment in libraries facilitates quick access to
online resources such as e-books and academic papers for
research and study by students and teachers.

Hotel Apartments
Chain Hotels
By deploying a Wi-Fi network, travelers can enjoy convenient,
high-speed Internet access to ensure a fulfilling stay.

Healthcare
Outpatient Service
The Wi-Fi network provides a mobile office environment
for medical staff. Medical staff can use mobile devices to
view patient information in real time, which significantly
improves treatment efficiency. Patients can access relevant
-3-
 Product Features
Multi-scenario Adaptability Security and Scalability
The RG-AP810-I, a dual-band wall-mounted wireless access The RG-AP810-I stands out with its exceptional wireless
point, is ideal for a wide range of applications, including network security, RF control, mobile access, QoS guarantee,
higher education, government, general education, and seamless roaming. With Ruijie's wireless access controller
finance, and business sectors, providing flexible solutions (AC), it enables wireless user data forwarding, security, and
to meet diverse service needs. access control to cope with diverse service needs.

High-speed Access and Compatibility Flexible Deployment and Power Supply

The RG-AP810-I supports various wireless protocols, The RG-AP810-I supports both local power supply and
such as 802.11ax, 802.11ac Wave2, 802.11ac Wave1, Power over Ethernet (PoE), providing you with the flexibility
and 802.11n. It features a hardware-independent dual- to choose the power supply mode. In addition, the RG-
band design to deliver a data rate of up to 1.775 Gbps, AP810-I can be mounted against a wall or ceiling, making
effectively eliminating wireless performance bottlenecks. space deployment and environmental requirements less
Additionally, it is compatible with an extensive array of challenging. This makes the RG-AP810-I particularly suitable
devices, promoting seamless interconnectivity among for scenarios such as large campuses, conference centers,
employees and customers. enterprise offices, and operation hotspots.

Solution Scalability Capabilities

Ruijie WIS Cloud Management Network Solution (WIS for
short) provides full-lifecycle cloud management network
services covering network procurement, planning,
deployment, acceptance, and O&M. When the AP connects to
WIS, it can meet various needs in multiple scenarios including
planning, deployment, acceptance, and operation through
cloud management, cloud O&M, cloud authentication, and
other value-added services provided by WIS.

Network-wide Cloud Management

Wireless Network Visualization
WIS supports integrated management and control of various
types of devices including APs, ACs, switches, gateways, and The overview function module of WIS provides a
routers. It supports remote O&M management operations comprehensive view of the network running status from
such as adding or batch importing of multi-branch network the perspective of overview, experience, users, devices,
devices, online status monitoring, configuration delivery, and environment. The network running information
upgrade, restart, configuration backup, and restoration. includes the following items:
It supports network-wide topology auto-discovery and Network basic information: device stability, device
topology status monitoring.

-4-
 health, user stability, network signal coverage, and Intelligent Network Diagnosis
network association.
User usage: user activity (network dependency), and With WIS, wireless network diagnosis and health index
user online experience and analysis. assessment can be completed in just one click, providing
Network saturation: network capacity usage and test results for each item. The health index provided by WIS
enables you to rapidly assess the state of your live network.
channel usage.
WIS can locate faulty areas, APs, and STAs, and provides
potential risks and corresponding optimization suggestions.

Product Specifications
Hardware Specifications

Hardware Specifications RG-AP810-I

Four spatial streams

Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams
Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams
Channels:
Radio 1 – 2.4 GHz: 20 MHz and 40 MHz
Radio 2 – 5 GHz: 20 MHz and 40 MHz
Combined peak data rate: 600 Mbps
Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15)
Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15)
Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n
Modulation types: BPSK, QPSK, 16-QAM, 64-QAM
Packet aggregation:
Aggregate MAC Protocol Data Unit (A-MPDU)
Aggregate MAC Service Data Unit (A-MSDU)
Dynamic Frequency Selection (DFS)
Cyclic Delay/Shift Diversity (CDD/CSD)
Maximum Ratio Combining (MRC)
Space-Time Block Coding (STBC)
Low-Density Parity Check (LDPC)
Transmit beam-forming (TxBF)

-5-
Hardware Specifications RG-AP810-I

Two spatial streams

Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams
Channels:
Radio 2 – 5 GHz: 20 MHz, 40 MHz, and 80 MHz
Combined peak data rate: 867 Mbps
Radio 2 – 5 GHz: 6.5 Mbps to 867 Mbps (MCS0 to MCS9)
Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)
Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ac Packet aggregation:
Aggregate MAC Protocol Data Unit (A-MPDU)
Aggregate MAC Service Data Unit (A-MSDU)
Dynamic Frequency Selection (DFS)
Cyclic Delay/Shift Diversity (CDD/CSD)
Maximum Ratio Combining (MRC)
Space-Time Block Coding (STBC)
Low-Density Parity Check (LDPC)
Transmit beam-forming (TxBF)

Four spatial streams

Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO , two spatial streams
Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams
Channels:
Radio 1 – 2.4 GHz: 20 MHz and 40 MHz
Radio 2 – 5 GHz: 20 MHz, 40 MHz, and 80 MHz
Combined peak data rate: 1.775 Gbps
Radio 1 – 2.4 GHz: 8.6 Mbps to 0.574 Gbps (MCS0 to MCS11)
Radio 2 – 5 GHz: 8.6 Mbps to 1.201 Gbps (MCS0 to MCS11)
Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA)
802.11ax Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
Packet aggregation:
Aggregate MAC Protocol Data Unit (A-MPDU)
Aggregate MAC Service Data Unit (A-MSDU)
Dynamic Frequency Selection (DFS)
Cyclic Delay/Shift Diversity (CDD/CSD)
Maximum Ratio Combining (MRC)
Space-Time Block Coding (STBC)
Low-Density Parity Check (LDPC)
Transmit beam-forming (TxBF)
WPA3

Wi-Fi
2.4 GHz: two built-in omnidirectional antennas, the max. antenna gain is 2.8 dBi.
5 GHz: two built-in omnidirectional antennas, the max. antenna gain is 3.6 dBi.
Antenna
Bluetooth
One onboard Bluetooth with built-in omnidirectional antenna, the max. antenna gain is 2.4
dBi.

1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation

Port 1 x RJ45 console port (serial console port)
1 x Bluetooth 5.1

-6-
Hardware Specifications RG-AP810-I

1 x multi-color system status LED

AP power-on status
Software initialization status and upgrade status
Status LED Uplink service interface status
Wireless user online status
CAPWAP tunnel timeout
Specific AP locating

1 x Reset button
Button Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings.

Main unit: 220 mm x 220 mm x 49 mm (8.66 in. x 8.66 in. x 1.93 in.)
Dimensions (W x D x H)
Shipping: 507 mm x 319 mm x 278 mm (19.96 in. x 12.56 in. x 10.74 in.)

Main unit: 0.6kg (1.33 lbs)

Weight Mounting bracket: 0.07kg (0.15 lbs)
Shipping: 1.04 kg (2.29 lbs)

Mounting Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)

Lock option Kensington lock and securing latch

The AP supports the following two power supply modes:

48 V DC/0.3 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm
center-positive circular plug. A DC power supply needs to be purchased independently.
Input power supply
PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard
(PoE).
Note: If both DC power and PoE are available, DC power is preferred.

Maximum power consumption: 12.95 W

DC powered: 12.95 W
PoE++ powered (802.3bt): 12.95 W
Power consumption
PoE+ powered (802.3at): 12.95 W
PoE powered (802.3af): 12.95 W
Idle mode: 6 W

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Storage humidity: 5%RH to 95%RH (non-condensing)
Operating temperature: –10°C to +50°C (14°F to 122°F)
Environment
Operating humidity: 5% RH to 95% RH (non-condensing)
At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude
increases by 166 m (546.81 ft.), the maximum temperature decreases by 1°C (1.8°F).

Mean Time
200,000 hours (22 years) at the operating temperature of 25°C (77°F)
Between Failure (MTBF)

System memory 512 MB DRAM, 128 MB flash

2.4 GHz: 26 dBm (398 mW)

5 GHz: 26 dBm (398 mW)
Max. transmit
Note:
power
Adjusting the transmit power by percentage (recommended) and in 1 dBm increments.
The transmit power is limited by local regulatory requirements.

-7-
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and
date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Radio Frequency Performance RG-AP810-I

Max. Transmit Power per Max. Receive Sensitivity

Frequency Band and rotocol Data Rate
Transmit Chain per Receive Chain

1 Mbps 23 dBm –91 dBm

2 Mbps 23 dBm –91dBm

2.4 GHz, 802.11b
5.5 Mbps 23 dBm –90 dBm

11 Mbps 23 dBm –87 dBm

6 Mbps 23 dBm –89 dBm

24 Mbps 22 dBm –82 dBm

2.4 GHz, 802.11g
36 Mbps 22 dBm –78 dBm

54 Mbps 20 dBm –72 dBm

MCS0 23 dBm –85 dBm

2.4 GHz, 802.11n (HT20)
MCS7 19 dBm –67 dBm

MCS0 23 dBm –82 dBm

2.4 GHz, 802.11n (HT40)
MCS7 19 dBm –64 dBm

MCS0 23 dBm –85 dBm

2.4 GHz, 802.11ax (HE20)
MCS11 15 dBm –58 dBm

MCS0 23 dBm –82 dBm

2.4 GHz, 802.11ax (HE40)
MCS11 15 dBm –54 dBm

6 Mbps 23 dBm –89 dBm

24 Mbps 22 dBm –82 dBm

5 GHz, 802.11a
36 Mbps 22 dBm –78 dBm

54 Mbps 20 dBm –72 dBm

-8-
 Radio Frequency Performance RG-AP810-I

Max. Transmit Power per Max. Receive Sensitivity

Frequency Band and rotocol Data Rate
Transmit Chain per Receive Chain

MCS0 23 dBm –85 dBm

5 GHz, 802.11n (HT20)
MCS7 19 dBm –67 dBm

MCS0 23 dBm –82 dBm

5 GHz, 802.11n (HT40)
MCS7 19 dBm –64 dBm

MCS0 23 dBm –85 dBm

5 GHz, 802.11ac (VHT20)
MCS9 18 dBm –60 dBm

MCS0 23 dBm –82 dBm

5 GHz, 802.11ac (VHT40)
MCS9 18 dBm –57 dBm

MCS0 23 dBm –79 dBm

5 GHz, 802.11ac (VHT80)
MCS9 18 dBm –53 dBm

MCS0 23 dBm –85 dBm

5 GHz, 802.11ax (HE20)
MCS11 16 dBm –58 dBm

MCS0 23 dBm –82 dBm

5 GHz, 802.11ax (HE40)
MCS11 16 dBm –54 dBm

MCS0 23 dBm –79 dBm

5 GHz, 802.11ax (HE80)
MCS11 16 dBm –52 dBm

Software Specifications

Software Specifications RG-AP810-I

Basic Function

Applicable software version RGOS11.9(6)W1B4 or later

WLAN

-9-
Software Specifications RG-AP810-I

Max. number of associated

256 (up to 128 STAs per radio)
STAs

Max. number of BSSIDs 32 (up to 16 BSSIDs per radio)

Max. number of WLAN IDs 16

0SSID hiding
Band steering
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN
attributes independently.
STA management
Remote Intelligent Perception Technology (RIPT)
Intelligent STA identification technology
Intelligent load balancing based on the STA quantity or traffic
Rate set settings

SSID-based STA limiting

STA limiting
Radio-based STA limiting

Bandwidth limiting STA/SSID/AP-based rate limiting

IPv4/IPv6 CAPWAP
Layer 2 and Layer 3 topology between an AP and an AC
An AP can automatically discover the accessible AC.
An AP can be automatically upgraded through the AC.
CAPWAP
An AP can automatically download the configuration file from the AC.
CAPWAP through NAT
Encryption over CAPWAP data channels
Encryption over CAPWAP control channels

Data forwarding Centralized and local forwarding

Wireless roaming Layer 2 and Layer 3 roaming

Wireless locating MU device locating

Security and Authentication

Remote Authentication Dial-In User Service (RADIUS)

Authentication and
PSK, PPSK, web, 802.1X, PEAP, WPA, WPA2 and WPA3 authentication
encryption
Data encryption: WEP (64/128 bits), WPA-TKIP, WPA-PSK, WPA2-AES, WPA3

Data frame filtering Allowlist, static blocklist, and dynamic blocklist

Wireless Intrusion Detection System(WIDS)

WIDS User isolation
Rogue AP detection and containment

ACL Dynamic ACL assignment based on 802.1X authentication (used with the AC)

-10-
Software Specifications RG-AP810-I

CPP CPU Protect Policy (CPP)

NFPP Network Foundation Protection Policy (NFPP)

Routing and Switching

Static and filtered MAC addresses

MAC address table size: 1,024
MAC
Max. number of static MAC addresses: 1,024
Max. number of filtered MAC addresses: 1,024

Jumbo frame length: 1,518

Ethernet
Full-duplex and half-duplex modes of interfaces

Interface-based VLAN assignment

Max. number of SVIs: 200
VLAN
Max. number of VLANs: 4,094
VLAN ID range: 1–4,094

ARP entry aging, gratuitous ARP learning, and proxy ARP

ARP Max. number of ARP entries: 1,024
ARP check

Static and DHCP-assigned IPv4 addresses

Max. number of IPv4 addresses configured on each Layer 3 interface: 200
IPv4 services
DHCP snooping, DHCP server, and DHCP client
NAT, FTP ALG and DNS ALG

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping

IPv6 services Max. number of IPv6 addresses configured on each Layer 3 interface: 400
IPv6 DHCP client

IPv4/IPv6 static route

IP routing Max. number of static IPv4 routes: 1,024
Max. number of static IPv6 routes: 1,000

Multicast Multicast-to-unicast conversion

PPPoE client
VPN
IPsec VPN

Network Management and Monitoring

NTP server and NTP client

SNMPv1/v2c/v3
Network management
Fault detection and alarm
Information statistics and logging

-11-
 Software Specifications RG-AP810-I

Network management Web management (Eweb)

platform RG-WS series wireless controller and Ruijie Cloud

User access management Console, Telnet, SSH, FTP client, FTP server, and TFTP client

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
Switchover among Fat, Fit, When the AP works in Fat mode, it can be switched to Fit mode through the console port or
and cloud modes Telnet mode.
When the AP works in cloud mode, it can be managed through Ruijie Cloud.

Value-added Software
The following value-added software functions can be achieved with the WIS solution (used with RG-iData-WIS and
wireless controller).

Value-added Software RG-AP810-I

Intelligent O&M

Network operation analysis, such as device stability and signal coverage

Measuring users' network experience based on indicators such as the latency, packet loss,
signal strength, and channel utilization, and visualizing results of the network experience
Statistics on the number of online and offline failures of STAs associated with different APs,
Experience average signal strength, and other parameters
VIP monitoring and alarm, and custom alarm thresholds
STA global experience map and experience coverage evaluation based on the time range
STA access protocol replay and fine-grained STA fault diagnosis
Note: To support the preceding functions, ensure that the AP works in Fit mode.

Network performance optimization, including one-click network optimization and scenario-

based optimization
Network optimization Client steering to cope with roaming stickiness, and experience indicator comparison
Client steering to cope with remote association, and experience indicator comparison
One-click diagnosis – analyzing problems and providing suggestions

Baseline analysis – recording the configuration, version, and other changes, and tracking
Big data network KPI changes
Time capsule – analyzing the device version and configuration change history

Batch generation of building floor information – uploading floor plans, and dragging and
Regional analysis
dropping AP positions

One-click report One-click health report – generating a report on the overall operation of a network

Security radar Unauthorized Wi-Fi signal location, presentation by category, and containment

-12-
 Value-added Software RG-AP810-I

Cloud Management

Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device
configuration and upgrade, and other functions
Management and
Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and
maintenance
automatically applying configured templates
One-click discovery of the wired and wireless network topology and topology generation

Cloud Authentication

SMS authentication, fixed account authentication, one-click authentication, Facebook

authentication, Instagram authentication, voucher authentication, and other authentication
Authentication mode modes
Authentication implemented in the cloud, without the need to deploy the local authentication
server

Customized portal Customized Portal authentication page for mobile phones and PCs

SMS gateway Interconnection with SMS gateways of GUODULINK and Alibaba Cloud

Platform Capabilities

Mainstream persistence solutions based on Hadoop, MongoDB, and MySQL, providing

distributed storage capabilities
Big data capabilities Spark-based big data computing capabilities
Data warehouse building based on Hive, and data model conversion, integration, and other
functions

Authorizing different applications for different users to meet service needs of different
Hierarchy and
departments
decentralization
Granting operation permissions to administrators in different scenarios

Account operation, authorization configuration, email configuration, configuration backup,

System management
exception alarms, and other system management functions

Note: For details, refer to the latest hybrid cloud management solution.

Regulatory Compliance

Regulatory Compliance RG-AP810-I

EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1, EN 301 489-3, EN 301 489-
Regulatory compliance
17, EN 300 328, EN 301 893,EN 300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

-13-
 Antenna Pattern Plots
Horizontal Planes (Top View)
The following figures show the azimuth antenna pattern at 2.4 GHz and 5 GHz radios.

0 0
345 10 15 345 10 15
330 5 30 330 5 30
0 0
315 -5 45 315 -5 45
-10 -10
300 -15 60 300 -15 60
-20 -20
285 -25 75 285 -25 75
-30 -30
-35 -35
270 -40 90 270 -40 90

255 105 255 105

240 120 240 120

225 135 225 135

210 150 210 150
195 165 195 165
180 180
2.4 GHz Azimuth Plane Theta=60° 5 GHz Azimuth Plane Theta=60°
2.4 GHz Azimuth Plane Theta=90° 5 GHz Azimuth Plane Theta=90°

Vertical Planes (Side View, AP Facing Down)

The following figures shows the elevation antenna pattern at 2.4 GHz and 5 GHz radios.

0 0
345 10 15 345 10 15
330 5 30 330 5 30
0 0
315 -5 45 315 -5 45
-10 -10
300 -15 60 300 -15 60
-20 -20
285 -25 75 285 -25 75
-30 -30
-35 -35
270 -40 90 270 -40 90

255 105 255 105

240 120 240 120

225 135 225 135

210 150 210 150
195 165 195 165
180 180
2.4 GHz Azimuth Plane Phi=0° 5 GHz Azimuth Plane Phi=0°
2.4 GHz Azimuth Plane Phi=90° 5 GHz Azimuth Plane Phi=90°

Note: Operating frequency bands are country-specific.

-14-
 Ordering Guide
Perform the following steps to configure an RG-AP810-I:
Select the RG-AP810-I.
If the uplink switch supports PoE power, connect the PoE switch to the AP's uplink port to provide power for the AP.
If the uplink switch does not support PoE power, purchase Ruijie's PoE Power Injector RG-E-120(GE), with the Data In
end of the interface connected to the switch and the Data & Power Out end connected to the AP uplink port to supply
power to the AP.
If the uplink switch does not support PoE power, you can also purchase a DC power module from a third-party vendor
to supply power to the AP through the DC power connector.

Ordering Information
Model Description

Wi-Fi 6 802.11ax-compliant indoor wireless access point

Dual radios, four spatial streams, peak data rate of 1.775 Gbps
Radio 1: 2.4 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 574 Mbps
Radio 2: 5 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 1.201 Gbps
1 x 10/100/1000M BASE-T uplink port, supporting PoE and local DC power supply
RG-AP810-I Binding Ruijie Cloud service lifetime license
Note:
The power source equipment (PSE) needs to be purchased separately. The PoE Power
Injector can be purchased from Ruijie.
The DC power module has to be purchased separately from a third party. The output
voltage/current must be 48 V/0.3 A.

RG-E-120(GE) Single PoE Power Injector with 1000BASE-T support, supporting 802.3af

Package Contents
Item Quantity

Main unit 1

Mounting bracket 1

Wall anchor 2

Phillips pan head screws M4 x 20 mm 4

Warranty Card and Hazardous Substance Table 1

Hardware Installation and Reference Guide 1

-15-
 Warranty
For more information about warranty terms and period, contact your local sales agency:
Warranty terms: https://www.ruijienetworks.com/support/servicepolicy
Warranty period: https://www.ruijienetworks.com/support/servicepolicy/Service-Support-Summany/
Note: The warranty terms are subject to the terms of different countries and distributors.

More Information
For more information about Ruijie Networks, visit the official Ruijie website or contact your local sales agency:
Ruijie Networks official website: https://www.ruijienetworks.com/
Online support: https://www.ruijienetworks.com/support
Hotline support: https://www.ruijienetworks.com/support/hotline
Email support: service_rj@ruijienetworks.com

-16-