MEDICAL GAS SYSTEMS

INSPITAL Medical Gas Stations & Control Units

INSPITAL offers complete solution for the medical gas system
of hospitals. All the system consist of medical gas generators,
manifolds, pipeline system, area control units, alarm systems,
monitoring screens and the final gas outlets in Operating
Theatres, ICU’s and patient rooms
Contents
Central Gas Stations 06
Manifold System with Double Regulator 08
Area Gas Control Panels 11
Alarm Panels 12
Medİcal Gas Alarm Management System 12
Medical Vacuum Station 14
Vacuum Pumps 18
Mini Vacuum Station 19
Anaesthetic Gas Scavenging System 19
Medical Air 20
Oxygen Production Systems 25
Cryogenic Oxygen Stations 26

Copper Pipes And Accessories
Copper Tubes 28
Fittings 29
Medical Gas Outlets 30

Patient Bed Head Units and Pendants

Patient Bed Head Units 32
Pendants 36

Medical Gas Outlets and Accessories

Outlet Boxes 40
Probes 41

Respiration Equipment
Flowmeters 42
Regulators 45
Venturi System Suction Units 46

Suction Accessories
Reusable Canister 50
Central Vacuum System 53

Nurse Calling Systems and Testing Equipment

Nurse Calling Systems 54
Testing Equipment 59
INSPITAL MEDICAL GAS STATIONS & CENTRAL GAS STATIONS & MANIFOLDS
CONTROL UNITS
INSPITAL central gas stations are designed to
INSPITAL offers complete solution for the medical supply continuous
gas system of hospitals. medical gas from the cylinders to hospital pipeline.

All the system consist of medical gas generators, Electronically controlled manifold system reduces
manifolds, pipeline system, area control units, alarm the cylinder pressure to required level.
systems, monitoring screens and the final gas
outlets in Operating Theatres, ICU’s and patient Each station controls one primary and one back up
rooms. cylinder racks and switches between them without
interrupting the continous flow
AREA GAS CONTROL PANELS VACUUM STATIONS

INSPITAL Area Gas Control Unit is manufactured Vacuum is an essential requirement of the supply
to provide isolation of individual floors of medical system for medical gases in hospitals.
gases in the hospital.
INSPITAL develops and manufactures fully
Area Gas Control Unit includes all features automatic, stable and highly reliable vacuum
required by the EN ISO 7396-1 and HTM 02-01 stations which are used to aspirate airways in the
standards. operating theatres, on ICU and on regular patient
Isolation may be required for installation, rooms
maintenance or in case of an emergency
 Central Gas Station for O2, N2O and CO2

INSPITAL central gas stations are designed to supply continuous medical gases like Oxygen, Nitrous Oxide, Entonox,
Medical Air, Carbon Dioxide and Nitrogen from the cylinders to hospital pipeline. Each station controls one primary
and one back up cylinder racks
The two stage regulation system, utilizing separate regulating units for each stage of pressure regulation, offers
higher flow rates and smoother flow rate curve.
Station switches to back up system automatically when the pressure of primary rack is dropped.

Station is equipped with non-return valves in order to prevent discharge of the gas in the cylinders during the
replacement or in case of leakage from the pipeline.

All pressure data and failure alarms are controlled by the digital control panel.

6
Medical Gas Plants

Oxygen Station Model No GZ71.01 GZ71.02 GZ71.03 GZ71.04 GZ71.05 GZ71.06 GZ71.07
Nitrousoxide Model No
GZ71.10 GZ71.11 GZ71.12 GZ71.13 GZ71.14 GZ71.15 GZ71.16
Station
High Pressure Reducer 150 m3/h - - 1 pc 1 pc 1 pc 1 pc 1 pc

High Pressure Reducer 40 m /h 3 1 pc 1 pc - - - - -

Cylinder Fixing Chain, Triple 2 pcs 4 pcs 4 pcs 6 pcs 8 pcs 10 pcs 14 pcs

Tail pipe & flexible Hose 6 pcs 12 pcs 12 pcs 18 pcs 24 pcs 30 pcs 42 pcs

Flexible Connection 2 pcs 4 pcs 4 pcs 6 pcs 8 pcs 10 pcs 14 pcs

Ramp Triple 4 pcs 4 pcs 6 pcs 8 pcs 10 pcs 14 pcs

Discharge Valve 2 pcs

Oxygen / Nitrousoxide Station Including the High Pressure Regulators (1 pc)

Alarm panel
Cylinder Quantity on Station 2x3 pcs 2x6 pcs 2x6 pcs 2x9 pcs 2x12 pcs 2x15 pcs 2x21 pcs

Bed Quantityx* 30 50 30-50 40-70 70-100 100-150 150-200

Total Operating Theatre No.* 3 5 5-6 6-7 6-9 8-12 10-14

(N2O Central )
Total Station Weight(~) 35 kg 48 kg 58 kg 85 kg 90 kg 120 kg 150 kg

* Bed and Operating Room Numbers are given approximately

Emergency Reserve Manifolds

Oxygen Station Model No GZ71.09 GZ71.08

Nitrousoxide Model No
GZ71.18 GZ71.17
Station
High Pressure Reducer 40 m3/h 1 pc 1 pc

Cylinder Fixing Chain, 2 pcs 4 pcs

Flexible Connection Pipe 2 pcs 4 pcs

Discharge Valve 1 pc 1 pc

Cylinder Quantity on Station 2 pcs 4 pcs

Bed Quantity 5-10 8-12

Total Station Weight(~) 15 kg 18 kg

GZ71.09 - GZ71.18

INSPITAL emergency reserve menifolds includes a two stage regulation system, utilizing separate regulating units for
each stage of pressure regulation, offers smooth & continous flow in case of an emergency.

Isolation valves are included at each manifold header connection such that one cylinder bank can be online with the
other bank closed off during normal system operation, for complience with HTM 02-01 standards

7
 Manifold System with Double Regulator
Inspital Automatic Changeover Manifold is designed to
provide a continuous supply of Oxygen, Nitrous Oxide,
Carbon Dioxide in healthcare facilities. The manifold
consists of two banks of cylinders located on each side of
the pressure control assembly. These pressured gases are
used in Operation Theatres, Intensive Care Units, Neonatal
Care Units, Emergency Rooms and Patient Rooms.
Automatic Changeover Manifold are designed and
manufactured in compliance with HTM 02-01, MDD
93/42/EEC, EN ISO 7396-1 and ISO 13485 standards

Features
• Special black ABS cover protection against evironmental
factors
• Designed to ensure continuous and accurate gas supply
• It is designed according to the principle of continuous
transfer functionality. So during exchange of the
cylinders,gas supply won’t be interrumpted.
• Alternative station capacities depending on the type of
Explanation Model No gas used and the distance
• Fully removable cover for easy access to internal
W/o alarm 40 m /h
3
GZ71.20
components
With alarm 40 m /h
3
GZ71.21
• Easy to reach alarm panel connections
W/o alarm 150 m /h 3
GZ71.22
With alarm 150 m3/h GZ71.23

• Manifold Type : 2 stage, 2 regulators Optional Accessories

• Inlet dia : 1/2” • Emergency reserve manifold
• Outlet dia : 22 mm • Heater Kits
• Outlet pressure : 4 - 5 bar • Isolation valve and test gas outlet
• Automation : Fully Automatic • Spare cylinder racks

Pressure Sensor
• Pressure sensors are used in digital alarm panels to detect
high and low pressure
Positive Pressure Transmitter Specs:
• Measurement range : 0 - 250bar
• Signal output : 4 - 20mA
• Mechanical connection : G 1/4 “
• Electrical connection : 2m
Model No Description • Feeding voltage : 8 - 32V
GZ71.47 Positive Pressure Sensor, Max.10 bar
VK40.01 Vacuum Sensor, -1/0 bar

8 GZ71.49 High Pressure Reducer Sensor, Max.250 bar

8
 Medical Gas Plants

High Pressure Reducer, Single Regulator

Inspital High Pressure Reducer provide safe pressure reduction
of medical gases between the cylinders and the delivery
system. It is designed to regulate line pressure between
5 to 4 bar. All components are degreased for oxygen use.
• Gases : Oxygen, Nitrous Oxide, Carbon Dioxide
• Working Mode : 2 stage, 1 regulator
• Inlet dia : 1/2”
• Outlet dia : 22 mm
• Inlet pressure (max) : 220 bar
• Outlet pressure : 4 - 5 bar

Explanation Model No
W/o alarm 100 m /h
3
GZ70.10
With alarm 100 m /h
3
GZ70.20
W/o alarm 40 m3/h GZ70.30
With alarm 40 m3/h GZ70.40

Cylinder Ramp
• Alternative models for connection of 1, 2, 3, 4 or 5 cylinders
• Made of galvanized steel, brass headers and copper pipe

Explanation Length mm Model No

GZ71.33
Single 180 mm GZ71.29
Double 330 mm GZ71.30
Triple 280 mm GZ71.31
Quadruple 930 mm GZ71.32
Quintuple 1230 mm GZ71.33

GZ71.31

Cylinder Fixing Chain

• Designed to fix the cylinders safely
• Alternative models for connection of 1, 2, 3, 4 or 5 cylinders
Explanation Lenght mm Model No
Single 180 mm GZ71.34
Double 330 mm GZ71.35
GZ71.38
Triple 580 mm GZ71.36
Quadruple 930 mm GZ71.37
Quintuple 1230 mm GZ71.38

9
GZ71.36

9
 Tail Pipe & Flexible Hose
• Used for connecting the cylinders to cylinder ramp
• Gas specific thread for O2, N2O, CO2 and medical gas cylinders
• Nut diameter: 1/2”

Explanation Gas Type Cylinder nut dia Model No

Tail Pipe 140 cm Oxygen (bull-nose) 5/8 (Male) GZ71.39
Tail Pipe 140 cm Carbondioxide Ø 21.8 mm,1/14 GZ71.40
Tail Pipe 140 cm Oxygen 3/4” GZ71.41
Tail Pipe 140 cm Nitrousoxide 3/8” GZ71.42
Flexible Hose 60 cm Oxygen (bull-nose) 5/8 (Male) GZ71.43
Flexible Hose 60 cm Carbondioxide Ø 21.8 mm,1/14 GZ71.44
Flexible Hose 60 cm Oxygen 3/4” GZ71.45
Flexible Hose 60 cm Nitrousoxide 3/8” GZ71.46
Flexible Hose 60 cm Oxygen (PIN INDEX) - GZ71.96
Flexible Hose 60 cm N2O (PIN INDEX) - GZ71.97

Flexible Connection Pipe

• Designed to connect ramp to ramp and ramp to manifold
• Made of chrome plated copper material
• Compatible with O2 and N2O gases

Discharge Valve
Flexible Connection Discharge Valve
Model GZ71.95
• Designed to be used for the gas discharge of medical gas stations
Model GZ71.94
• Compatible with O2 and N2O gases
• Made of brass

Medical Gas Ball Valve & Zone Service Unit

• Designed and specially cleaned to use in medical gas system
• Optional lock and nist connection
• %100 corrosion proof design, no painted steel or sacrificial
• Break out plastic window provides safe access in an emergency

Ball Valve With Ball Valve Working

Pipe Dia.
Box Model No Model No Pressure (bar)
10 mm GZ71.50 GZ81.50 78
12 mm GZ71.51 GZ81.51 64
15 mm GZ71.52 GZ81.52 55
22 mm GZ71.53 GZ81.53 50
28 mm GZ71.54 GZ81.54 40
35 mm GZ71.55 GZ81.55 40
42 mm GZ71.56 GZ81.56 35
54 mm GZ71.57 GZ81.57 27
10
76 mm GZ81.58 GZ81.59 16

10
Medical Gas Plants

Area Gas Control Panels

Description
Inspital Area Gas Control Unit is manufactured to provide
isolation of individual floors of medical gases in the hospital.
Area Gas Control Unit includes all features required by the
EN ISO 7396-1 and HTM 02-01 standards. Isolation may
be required for installation, maintenance or in the case of
an emergency

Classification
• Area Gas Control Unit is manufactured HTM 02-01,
HTM 2022, EN ISO 7396-1 and BS EN 15908.
Stainless Steel Electrostatic Painted

Electrostatic Painted Services

Under Plaster Version On Plaster Version • Oxygen
Explanation
Model No Model No • Nitrous Oxide
With 1 gas w/o alarm GZ71.58 GZ71.68 • Medical Air 400 kPa
With 1 gas with alarm GZ71.59 GZ71.69 • Surgical Air 700 kPa
With 2 gas w/o alarm GZ71.60 GZ71.70 • Medical Vacuum
With 2 gas with alarm GZ71.61 GZ71.71
With 3 gas w/o alarm GZ71.62 GZ71.72 Feartures
With 3 gas with alarm GZ71.63 GZ71.73 • Controls 1 to 5 gases, including vacuum
With 4 gas w/o alarm GZ71.64 GZ71.74
• Lockable covers with emergency access lock system
With 4 gas with alarm GZ71.65 GZ71.75
• Window on the cover enables the user to monitor
With 5 gas w/o alarm GZ71.66 GZ71.76
the analog manometers without opening the covers
With 5 gas with alarm GZ71.67 GZ71.77
• Under plaster and on plaster types are avaliable
Stainless Steel
Under Plaster Version On Plaster Version Alarm Unit
Explanation
Model No Model No
• Local Area Alarm
With 1 gas with alarm GZ71.83 GZ71.88
With 2 gas with alarm GZ71.84 GZ71.89
Pressure Switches
With 3 gas with alarm GZ71.85 GZ71.90
With 4 gas with alarm GZ71.86 GZ71.91
• Pressure switches can be fitted inside the box to
With 5 gas with alarm GZ71.87 GZ71.92 enable local monitoring.

Area Gas Control Panels With Second Stage Regulator

• Second stage pressure reducing from 10 bar to 7 bar or 4 bar
• Lockable covers with emergency access lock system
• Stainless steel valve box
• Double or single regulators option
• Under plaster and on plaster types are avaliable

Under Plaster Version On Plaster Version

Explanation
Model No Model No
With 1 gas GZ71.83F GZ71.88F
With 2 gas GZ71.84F GZ71.89F
With 3 gas GZ71.85F GZ71.90F
With 4 gas GZ71.86F GZ71.91F
With 5 gas GZ71.87F GZ71.92F

11

11
 Digital Alarm Panels
Inspital Medical Gas Alarm panel monitor the medical gas
source equipment and the operating pressures in the pipeline
distribution system, as well as, the critical care areas of the
facility to ensure that the medical gas and vacuum systems
remain safe for patient use.

Inspital Digital Alarm Panel is designed and manufactured in

compliance with HTM2022, HTM 02-01, C11,
BS EN 60601-1-2 and BS EN ISO 7396-1.

Sensor-mounted alarm panel displays can be monitored on the

computer and other panels by RS232

Capacity Analog
Model No
Single Gas GZ71.78
Double Gas GZ71.79
Triple Gas GZ71.80
Four Gas GZ71.80F
Five Gas GZ71.81

Central Alarm Panels

Designed to be used in central gas station manifold systems
Audible and visual alarms in case of pressure problems
The panel works with two high pressure switches and one
positive pressure sensor to detect pressure changes
Sensors and switches are not included

Model: GZ71.93

12

12
Medical Gas Plants

MEDICAL GAS ALARM MANAGEMENT

SYSTEM

INSPITAL developed an automation system which allows

users to monitor all running medical gas system of the
hospital.

Monitoring system collects all datas from the alarm panel

of central vacuum system, medical air system, manifold
system and area control panels. All those instant datas
can be displays it on specified touch monitor, any computer
in related departments or by the technicians.

All stations or specified stations can be monitored instant-

ly. System records all signals of operating and emergency
alarms. Alarms are monitored both visually and audible
indicators.

The Alarm Management System makes sure that

technical and clinical personnel are kept informed
about the status of the central gas supply at all
times. It monitors the GMS in all areas and
records all signals such as operating and emergency
alarms

13

13
 Medical Vacuum Station
Medical Vacuum is an essential requirement of the supply system for medical gases in hospitals. Inspital develops and
manufactures fully automatic, stable and highly reliable vacuum stations which are used to aspirate fluids in the operating
theatres, on ICU and on regular patient rooms.
Inspital Medical Vacuum Plants are designed and manufactured in compliance with HTM 02-01, HTM 2022,
MDD 93/42/EEC EN ISO 7396-1 and C11 standards.
• Station is fully controlled by PLC system. This system enables equal aging of
vacuum pumps which means a much longer operating life time
• Protected by bacterial filters
• Equipped with lubricated rotary vane vacuum pumps

Receiver

Bacteria Filter

Control Panel

Exhaust

Liquid Trap

Vacuum Pump

14

14
Medical Gas Plants

Vertical Type– Central Vacuum Station

• Designed to be used for central vacuum systems in
operating theatres, ICUs, emergencies and laboratories
of hospitals
• PLC controlled full automatic system
• Compact and modular design
• Medical type high efficiency bacteria filters
• Lubricated rotary vane vacuum pumps
• Sliding shelves enable easy access for maintenance

Model No VK40.02 VK40.03 VK40.04 VK40.05 VK40.06 VK40.07

System Capacity (m3/h) (50 hz) 47x2 47x3 100x2 100x3 200x2 200x3
Power (kW) (50 Hz) 1,10x2 1,10x3 2,20x2 2,20x3 4,00x2 4,00x2
Pump Qty 2 3 2 3 2 3
Tank Capacity (L) 500 500 1000 1000 1500 1500
Bactery Filter Qty 1 pc 1 pc 1 pc 2 pc 2 pc 2 pc
Liquid Trap 1 pc 1 pc 1 pc 1 pc 1 pc 2 pc
Inlet hose dia. 1” 1” 1”1/4 1”1/4 2” 2”
Outlet hose dia. 1” 1” 1”1/2 1”1/2 2” 2”
Bed Qty 70 50-90 90-180 150-200 160-300 160-350

15

15
 Tank Mounted – Central Vacuum Station
• Designed to stand alone assemblies with all components and filters mounted on a single horizontal vessel
• PLC controlled full automatic system
• Compact tank top design
• Suitable for low height medical gas plant rooms
• Specifically designed for ease of installation

Model No VK40.08 VK40.09 VK40.10 VK40.11 VK40.12 VK40.13

System Capacity (m /h (50hz)

3
47x2 47x3 100x2 100x3 200x2 200x3

Power (kW) (50 Hz) 1,10x2 1,10x3 2,20x2 2,20x3 4,8x2 4,8x3

Pump Qty 2 3 2 3 2 3

Tank Capacity (L) 500 500 1000 1000 1000 1000

Bactery Filter Qty 1 pc 1 pc 1 pc 2 pcs 2 pcs 2 pcs

Liquid Trap 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc

PLC Qty 1 1 1 1 1 1

Inlet hose dia. 1” 1” 1”1/4 1”1/4 2” 2”

Outlet hose dia. 1” 1” 1”1/2 1”1/2 2” 2”
Bed Qty 70 50-90 90-180 150-200 160-300 160-350
16

16
Medical Gas Plants
PLC Control Panel
• Inspital PLC panels are fully automatic digital control units
• They are designed to control multiple vacuum pumps of central
vacuum stations.
• It enables equal aging of pumps and longer lifetime for the vacuum
stations
Pump Type Capacity m3/h Dimensions Model No

Single 25 - 40 350x160x530 mm VK40.23

Double 65 - 100 350x160x530 mm VK40.24

Triple 150 - 200 350x160x530 mm VK40.25

Bacteria Filter Set

• 100 m3/h flow capacity
• Integrated by-pass valves and discharge system
• Bacteria filtration of 30 micron

Pump Type Model No

Single VK40.26
Double VK40.27

Liquid Trap
• High efficiency trap designed to drain liquids in vacuum pipeline
• 1.5 L capacity
• Inlet and outlet valves included

Model: VK40.28

Vacuum Tank
• Designed to use in central vacuum stations
• Different capacities for different stations
• Vertical or horizontal types avaliable
• Made of highly durable steel material
Capacity (L) Wall Thickness Diameter Length Model No
500 L 5 mm 630 mm 1800 mm VK40.29
750 L 5 mm 750 mm 1800 mm VK40.30
1000 L 6 mm 850 mm 1920 mm VK40.31
1500 L 6 mm 1100 mm 2200 mm VK40.32

17

17
 Vacuum Pumps
The lubricated rotary vane pumps are designed
to be used in a wide range of industrial and
healthcare applications. They can run continuously
from atmospheric pressure to ultimate vacuum.
• Specially designed for medical applications
• Stable and longlife pumps
• Lubricated rotary vane vacuum pumps
• Single stage vacuum pump
• High pumping speed even at low pressure
• Integrated oil mist filter on the exhaust
• Pumps can run continuously from atmospheric pressure to
ultimate vacuum
• Silent and very robust pumps
• Options; Oil level switch, PT100 temperature sensor

• Options; Oil level switch,

PT100 temperature sensor
Maintenance Kits Maintenance Kits
Usual maintenance (EC): 3 000 hours or Preventive maintenance (MP): 12 000 hours
24 months • Radial shaft seals change
• Inspection / cleaning • Sliding rings change
• Oil change • Vanes replacement*
• Oil filter replacement • End cover gaskets replacement
• Oil separating cartridge(s) change • Automatic drain + gaskets replacement
• Inlet valve overhaul • Rubber feet replacement
• Gas ballast filter change • Coupling ring overhaul

Nominal Flow Motor Power 3 000 hours or

12 000 hours
Weight 24 months,
Model No Maintenance Kits
Maintenance Kits
m3.h-1 Kw

50 Hz 60 Hz 50 Hz 60 Hz kg Model no Model no

VK40.16 30 35.3 0,75 0,9 39

VK40.46 VK40.56
VK40.17 47.7 56 1,1 1,32 52

VK40.18 64.3 72.2 1,5 1,8 75 VK40.48 VK40.58

VK40.19 96 115 2,2 2,70 85 VK40.49 VK40.59

VK40.20 132 156 3 3,6 154 VK40.50 VK40.60

VK40.21 198 240 4 4,8 140 VK40.51 VK40.61

VK40.22 293 354 5,5 6,6 162 VK40.52 VK40.62

18

18
Medical Gas Plants

Mini Vacuum Station

• Compact and independent ready-to-run vacuum plant
• Lubricated rotary vane vacuum pump
• Standard suction network inlet
• Bacteria filter with aspiration (optional)
• Liquid trap (optional)

Model No VK40.14 VK40.15

Nominal Capacity (m .h-1) 50 Hz

3
25 2x10

Power (kW) 50 Hz 0,75 2x0,35

Tank Capacity (L) 70 70

Noise Level dB (A) 60 60

VK40.14
Oil Capacity(L) 1,5 1,5

Weight (kg) 85 85

VK40.15

Anaesthetic Gas Scavenging System,

Single and Double
Anaesthetic Gas Scavenging the Systems AGSS are
designed to remove anesthetic gas mixture formed in the
operating room. Inspital AGSS systems are CE marked
according to MDD 93/42/EEC and comply with
HTM 02-01. Anaesthetic Gas Scavenging Plant is classified
as Class IIa Medical Devices.
Single and duplex blower versions are avaliable
Blowers are oil-free, air cooled side channel regenerative
type and suitable for continuous operation.
VK50.01
VK50.02
Model No VK50.01 VK50.02 VK50.03 VK50.04
Capacity 80 m3/h 130 m3/h 2x80 m3/h 2x130 m3/h
Power 0,76 kW 1,3 kW 2x0,76 kW 2x1,3 kW
Noise Level 63 dB (A) 66 dB (A) 63 dB (A) 66 dB (A)
VK50.03 Inlet dia 1” 1/22” 1” 1/2 2”
VK50.04 Outlet dia Ø 44 Ø 60 Ø 44 Ø 60
Weight 45 kg 55 kg 120 kg 140 kg

19

19
 Medical & Surgical Air Plant Systems

P Filter Model

Compressor Tank
Medical
System

Control
Board

Bacteria Filters
Dryer

Medical Air
Medical air is mainly supplied via a medical gas pipeline system where the air is manufactured by compressors,
dryers and filtration system.

In the hospitals medical air supply is a vital life support service, maintaining respiration of the critically ill patients during
mechanical ventilation.

The main uses of medical air in the hospitals are:

• Driving ventilators and incubators, where it provides uncontaminated and controlled air flows helping to
reduce high concentration of oxygen exposure,
• As a carrier gas for anaesthetic agents
• As a power source for driving surgical tools in the operating theatre

Inspital Medical Air Plants are desined and manufactured according to ISO 13485 Quality Management
System and comply with MDD 93/42/EEC.

20

20
Medical Gas Plants

Medical Compressed Air

Medical Compressed air is a widely used gas in
hospitals. Therefore, the requirements and quality
standards are high. Medical compressed air is
important for the ventilation of ICU patien the most
important medical gas other than oxygen.
International standards such as EN ISO 7396-1
and the European Pharmacopoeia guarantee
the continuity of medical compressed air and
ensure that quality control is carried out regularly.
In addition, it defines the limit values that the
medical air must have. With INSPITAL Medical
Compressed Air Stations, we ensure that you obtain
quality air according to EN ISO 7396-1 and European
Pharmacopoeia.

Contamination European Pharmacopoeia

O2 20.4% <x<21.4%

CO2 <500 ppm

CO <5 ppm

SO2 <1 ppm

NO <2 ppm

NO2 <2 ppm

H2O <67 ppm

Oil vapor <0.1 mg/m3

Medical Air System

Compressor Compressor Compressor Tank Medical Gas Operating
Model No Bed Quantitiy
Capacity Pcs Type Capacity System Temperature
GZ80.20 78 m3/h 3 Screw Type 2x300 L 2 (+10) - (+50) C° 50-100

GZ80.21 115 m3/h 3 Screw Type 2x500 L 2 (+10) - (+50) C° 100-150

GZ80.22 168 m3/h 3 Screw Type 2x1000 L 2 (+10) - (+50) C° 150-200

GZ80.23 235 m3/h 3 Screw Type 2x1000 L 2 (+10) - (+50) C° 200-250

GZ80.24 276 m3/h 3 Screw Type 2x1500 L 2 (+10) - (+50) C° 250-300

GZ80.25 420 m3/h 3 Screw Type 2x2000 L 2 (+10) - (+50) C° 300-500

21

21
 Technical Air System
Medical Air Plant is designed to provide a continuous supply of medical quality air. Medical air is mainly supplied via a
medical gas pipeline system where the air is generated by compressors, dryers and filtration system.
Inspital Medical Air plant with rotary screw compressors can be used in wide capacity range. Compressor capacities
varies from 2.2 kW to 37 kW. High quality screw blocks with perfect lubrication systems enable continuous operation,
stability and reliability. At technical air solutions offers compressed air dryers with +3-5 C° dew point temperature.
Inspital can offer different capacities according to hospital consumption and bed capacity.

Compressor Compressor Dryer Tank Operating

Model No Bed Quantitiy
Capacity Type Capacity Capacity Temperature
GZ80.01 1x39 m /h
3
Screw Type 1x50 m³/h 300 L (+10) - (+50) C° 20-50
GZ80.02 2x39 m /h
3
Screw Type 1x50 m³/h 300 L (+10) - (+50) C° 20-50
GZ80.03 1x84 m /h
3
Screw Type 1x87 m³/h 500 L (+10) - (+50) C° 50-100
GZ80.04 2x84 m /h
3
Screw Type 1x87 m³/h 500 L (+10) - (+50) C° 50-100
GZ80.05 1x117 m /h
3
Screw Type 1x130 m³/h 1000 L (+10) - (+50) C° 100-150
GZ80.06 2x117 m3/h Screw Type 2x130 m³/h 1000 L (+10) - (+50) C° 100-150
GZ80.07 1x168 m3/h Screw Type 1x170 m³/h 1500 L (+10) - (+50) C° 150-200
GZ80.08 2x168 m3/h Screw Type 2x170 m³/h 1500 L (+10) - (+50) C° 150-200
GZ80.09 1x210 m3/h Screw Type 1x283 m³/h 2X1000 L (+10) - (+50) C° 200-250
GZ80.10 2x210 m /h
3
Screw Type 2x283 m³/h 2X1000 L (+10) - (+50) C° 200-250

22

22
Medical Gas Plants

Air Compressors
• Quiet and efficient axial fan directly connected to
main motor
• Additional axial fan with temperature control
• Compact, small footprint, easy to service.
• Compressor capacity 21 - 324 m³ / h
• Integrated PLC control until 2 compressor

Compressed Air Tank

• Made of ST-37 steel
• Operating pressure at 15 atm
• Manufactured and tested according to
BS EN 286-1:1998+A2:2005 standards

Model No GZ82.01 GZ82.02 GZ82.03 GZ82.04 GZ82.08

Capacity (L) 300 500 1000 1500 2000

Trunk (st-37) (st-37)

Inlet 1 1/2”

Compressed Air Regulator Group

• Air Regulator Group is the final regulation process
of the air coming from the compressed air station.
• It is used to regulate the air pressure to required
level (4 bar or 7 bar)

Model No GZ82.05 GZ82.06

Capacity(m3/h) 100 200

23

23
 Medical Air Plant with Oil-Free Compressors
Inspital offers medical air plants with high technology oil-free
compressors.
These new generation compressors are reliable compact,
silent and delivers oil free compressed air. As compressors
are designed for continuous operation, it is very reliable and
efficient with low maintenance cost. Because of its compact
design, installation is easy and air evacuation is smooth as it
doesn’t include any oil.

Compressor
Model No Compressor Type Dryer qty x Capacity Tank Capacity
qty x capacity

GZ80.12 2x109 m3/h Oil Free 1X100 m³/h 1500 L

GZ80.13 3x109 m /h
3
Oil Free 2X100 m³/h 2x1000 L
GZ80.14 1x158 m /h
3
Oil Free 1x190 m³/h 2x1000 L
GZ80.15 2x158 m /h
3
Oil Free 1x190 m³/h 2x1000 L
GZ80.16 3x158 m /h
3
Oil Free 2x190 m³/h 2x1500 L
GZ80.17 1x213 m3/h Oil Free 1x210 m³/h 2x1000 L
GZ80.18 2X213 m3/h Oil Free 1x210 m³/h 2x1500 L
GZ80.19 3X213 m /h3
Oil Free 2x210 m³/h 2x1500 L

Oil-free system provides 100% oil-free air and it has low noise level for hospital environment.
As there is no oil injected to the air, there is no need to invest for the purification of waste water. This is the
best way to protect the environment.

24

24
Medical Gas Plants
Oxygen Production Systems
Inspital Oxygen Generators are new generation stations that allows on-site production of oxygen. This helps hospitals
to supply oxygen from their own automated system independently. These systems are generally combined with
cylinder systems for instant back up.
Inspital Oxygen Generators deliver oxygen in a purity up to 95% at flow rate from 3 to 50 m3/h. Station delivers
constant purity rate independent from the consumption. Ideal system consists of air compressors, dryers, O2
generator, active carbon tower, tanks and filters.
Features:
• Oxygen purity level and outlet pressure indicator
• Easy handling from Touch screen
• Automatic operation
• Reducing operation cost
• Return investment in less than 1 year
• Optional oxygen analyzer

Compressor Compressor Air tank Oxygen Generator Oxygen tank Line filter
Dryer

Line filter
(MHA + MHE)

O2 Generator Bed Number Compressor Compressor Air Tank Tank Capa- Dreyer
Model No
Capacity Capacity (m3/h) Type Capacity city Capacity
GZ81.01 3 m3/h 7,5 kw/(0,92 m3/h) Screw Type 500 L 500 L CAD 30
GZ81.02 6 m /h
3
50-100 11 kw/(1,40 m /h)
3
Screw Type 500 L 500 L CAD 52
GZ81.03 9 m /h
3
22 kw/(3,2 m /h)
3
Screw Type 1000 L 1000 L CAD 61
GZ81.04 12 m /h 3
22 kw/(3,2 m /h)
3
Screw Type 1000 L 1000 L CAD 61
GZ81.05 15 m /h
3
30 kw/(4,4 m /h)
3
Screw Type 1000 L 1000 L CAD 110
100-150
GZ81.06 18 m3/h 30 kw/(4,4 m3/h) Screw Type 1000 L 1000 L CAD 110
GZ81.07 20 m3/h 30 kw/(4,4 m3/h) Screw Type 1000 L 1000 L CAD 110
GZ81.08 25 m3/h 30 kw/(4,4 m3/h) Screw Type 1000 L 1000 L CAD 110
GZ81.09 30 m /h
3
150-200 45 kw/(6,2 m /h)
3
Screw Type 1000 L 1000 L CAD 170
GZ81.10 40 m /h
3
55 kw/(9,2 m /h)
3
Screw Type 2000 L 1500 L CAD 200
GZ81.11 50 m /h
3
200-250 75 kw/(10,6 m /h)
3
Screw Type 2000 L 1500 L CAD 250

25

25
 Cryogenic Oxygen Stations
Main components of the Cyrogenic Oxygen Stations
are liquid oxygen (LOX) storage tanks and evaporation
systems.

Classification
Inspital LOX tanks are specially designed and Manufactured
according to 2014/68/EU Pressure Equipment Directive
(PED) EN 13445 – Annex C for long term storage of
cryogenic liquified gases under pressure.

DESIGN CODE E N 13458 - PED 97/23/EC

MAX. ALLOWABLE WORKING

DESIGN TEMPERATURE -196˚C

INNER VESSEL MATERIAL Stainless Steel (According to EN 10028-7)

10028-3)
INSULATION Perlite & Vacuum

Features:
• Optional long-distance control with telemetry
• Standard manual or optional digital level indicator
• TUV Austria approved and CE marked
• Included VIE control panel

Air Gas Standard Storage Tanks Dimensions

19 Bar Cryogenıc lin/Lox/Lar Storage Tanks
Gros Net Capacity Daily Evap. Empty
Model no ØD B L W H
Capacity (%95 Filling) Rate (02) Weight
liters liters %/day mm mm mm mm mm kg

GZ90.05 6200 5890 0.30 1830 5120 5910 2050 2120 3750

GZ90.10 10450 9930 0.29 2400 4640 5340 2400 2690 5300

GZ90.15 14850 14110 0.28 2400 6130 6830 2400 2690 6950

GZ90.25 24750 23510 0.24 2400 9925 10625 2400 2690 10800

GZ90.30 31300 29735 0.23 2680 9600 10300 2680 3020 11750

GZ90.50 50000 47500 0.19 3050 11300 3050 11300 12000 20500
26

26
Medical Gas Plants

Ambient Air Vaporizer

Ambient air vaporisers requires no external source of
energy; and enables vaporization through exchange of heat
with the surrounding air. The liquefied gas is vaporized, and
warmed to almost the surrounding temperature, and
finally led to the users in its gaseous state
The vaporisers are for use with liquid:
• Oxygen
• Nitogen
• Argon
• Carbon Dioxide
• Nitrous Oxide
• LNG
Design Specifications
INSPITAL offers a full range of ambient air vaporizers in
Exterior Capacity for LOX
different versions and for different applications. Our Model no
Surface (M2) (Nm³ /h)
following properties:
GZ90.05 29 93
• Designed and manufactured according to PED 97/23/EC
GZ90.10 59 186
• Has CE marking
GZ90.15 117 372
• Max allowable working pressure 40 bar
GZ90.25 205 650
• Cleaned for oxygen service
GZ90.30 292 929
• Seismic requirements acc. to uniform building code-zone 4
GZ90.50 400 1274
• Low pressure drop
• Efficient fin tube desing The evaporator selection is made according to
• Optimised external and internal surfaces for optimum consumption of hospital.
convection Evaporator needs to change between reserve at
Vaporiser options every 8 hours.
The evaporator capacities to be selected according to
• Ambient air vopariser options are
the external surface will vary according to the outdoor
• Fin tube vaporisers
temperature, working time and fluid type.
• Fan assisted vaporiser
Fin tube vaporisers rely on natural convection while fan
assisted models are equipped with an models are
equipped with an enhance air flow and increase
efficiency.

27

27
 Copper Tubes
Pipeline solutions for medical installations
• Medical copper tubes are degreased and marked according
to EN 13348 System in accordance with requirement of
the medical gas market.
• Straight length copper tube is available in 4m lengths and
individually red capped.
• We have stocks of medical copper tubes available for
immediate dispatch.
• Special wooden cases packaging is suitable for exporting
delivery.

Specific Benefits Include:

• Specially cleaned copper tubes for medical gas and
vacuum systems. Superseding earlier ‘hybridised’ copper
tube standards such as BS EN1057 & BS 2871 Part 1
quoted in HTM 2022 & NHS engineering spec.
• Tighter limits on cleanliness determination.

Working
Model No Explanationn Thicknesss Length
Pressure
MB10.01 8 mm 1,0 mm 84 bar 4m
Copper Pipe Label
MB10.02 10 mm 0,6 mm 84 bar 4m
Model No Explanation MB10.03 10 mm 1,0 mm 84 bar 4m
MB30.01 Oxygen 250 pcs MB10.04 12 mm 0,6 mm 77 bar 4m
MB30.02 Vacuum 250 pcs MB10.05 12 mm 1,0 mm 77 bar 4m
MB30.03 Air 250 pcs
MB10.06 15 mm 0,7 mm 63 bar 4m
MB30.04 Nitrogen 250 pcs
MB10.07 15 mm 1,0 mm 63 bar 4m
MB30.05 Agss 250 pcs
MB10.08 22 mm 1,0 mm 58 bar 4m
MB10.09 28 mm 1,0 mm 51 bar 4m
MB10.10 28 mm 1,5 mm 51 bar 4m
MB10.11 35 mm 1,0 mm 40 bar 4m
MB10.12 35 mm 1,5 mm 40 bar 4m
MB10.13 42 mm 1,0 mm 42 bar 4m
MB10.14 42 mm 1,5 mm 42 bar 4m
MB10.15 54 mm 1,5 mm 27 bar 4m
MB10.16 54 mm 2,0 mm 27 bar 4m
MB10.17 76 mm 1,5 mm 29 bar 4m
MB10.18 76 mm 2,0 mm 29 bar 4m
MB10.19 108 mm 2,0 mm 16 bar 4m
MB10.20 108 mm 2.5 mm 16 bar 4m

28

28
Copper Tubes And Accessories

Fittings & Accessories

• Inspital’s end feed fittings, manufactured according to
BS EN 1254-1; 1998 are seamless, monoblock fittings, which
makes them stronger and easier to use.
• Biostatic composition of the copper material inhibits bacterial
growth on its surface
• End connections: Copper x Copper
• Lightweight, strong and corrosion resistant
• Unaffected by sunlight, has no special storage requirements and
does not produce toxic fumes in a fire.
• All fittings supplied contain less than 100mg/m2 (0.01mg cm2)
of hydrocarbons on the degreased surface.

Elbow 90 Equal T Coupling Reducer

Diameter Model No Model No Model No Model No
10 mm FT50.01 FT50.09 FT50.28 FT50.17 / 12x10 mm
12 mm FT50.02 FT50.10 FT50.29 FT50.18 / 15x12 mm
15 mm FT50.03 FT50.11 FT50.30 FT50.19 / 22X12 mm
22 mm FT50.04 FT50.12 FT50.31 FT50.20 / 15x22 mm
28 mm FT50.05 FT50.13 FT50.32 FT50.21 / 15x28 mm
35 mm FT50.06 FT50.14 FT50.33 FT50.22 / 22x28 mm
42 mm FT50.07 FT50.15 FT50.34 FT50.23 / 22x35 mm
54 mm FT50.08 FT50.16 FT50.35 FT50.24 / 54x22 mm
76 mm FT51.09 FT51.17 FT51.36 FT50.25 / 54x28 mm
FT50.26 / 54x35 mm
FT50.27 / 76x54 mm
FT51.28 / 35x28 mm
FT51.29 / 35x42 mm
FT51.30 / 54x42 mm

Copper Pipe Clips

• Inspital designed clips used as copper tube supports on
Explanation Blue White Gray Yellow
ceilings and walls.
• Can be mounted directly on the wall or mounted by rail. Hook 10 - 12 mm FT50.39 FT50.46 FT50.53 FT50.60
• Single and jointed usage Hook 15 mm FT50.40 FT50.47 FT50.54 FT50.61
• Color coded clips copmatible with gas standard
• Halogen free, non-flammable material Hook 22 mm FT50.41 FT50.48 FT50.55 FT50.62

Hook 28 mm FT50.42 FT50.49 FT50.56 FT50.63

Hook 35 mm FT50.43 FT50.50 FT50.57 FT50.64

Hook 42 mm FT50.44 FT50.51 FT50.58 FT50.65

Hook 54 mm FT50.45 FT50.52 FT50.59 FT50.66

Model No Explanation
FT50.36 Hook Rail
FT50.37 Stoper
FT50.38 Distance 29

29
 Medical Gas Outlets
Outlet Dia : 45 mm
Copper Pipe Dia : 10 mm
Production Standard : BS 5682/EN ISO 9170-1
Color Codes : Oxygen – White
Vacuum – Yellow
Nitrous Oxide – Blue
Compressed Air – Black & White

Oxygen Vacuum Air 4 Air 7 N2O CO2

DIN PR80.01 PR80.02 PR80.03 PR80.04 PR80.05 PR82.01

BS PR80.06 PR80.07 PR80.08 PR80.09 PR80.10 -

Medical Gas Outlets

Outlet Dia : 49 mm
Copper Pipe Dia : 10 mm
Production Standard : BS 5682/EN ISO 9170-1
Color Codes : Oxygen – White
Vacuum – Yellow
Nitrous Oxide – Blue
Compressed Air – Black & White

Oxygen Vacuum Air 4 Air 7 N2O CO2

DIN-90º PR80.11 PR80.12 PR80.13 PR80.14 PR80.15 PR82.02

BS-90º PR80.16 PR80.17 PR80.18 PR80.19 PR80.20 -

AFNOR-90º PR80.21 PR80.22 PR80.23 PR80.24 PR80.25 -
DIN-45º PR82.11 PR82.12 PR82.13 PR82.14 PR82.15 PR82.03

30
BS-45º PR82.16 PR82.17 PR82.18 PR82.19 PR82.20 -
AFNOR-45º PR82.21 PR82.22 PR82.23 PR82.24 PR82.25 -
30
Medical Gas Outlets and Accessories

Medical Gas Outlets

Outlet Size : 62 X 96 mm
Copper Pipe Dia : 10 mm
Production Standard : BS 5682/EN ISO 9170-1
Color Codes : Oxygen – White
Vacuum – Yellow
Nitrous Oxide – Blue
CHEMETRON
Compressed Air – Black & White

OHMEDA

Oxygen Vacuum Air N2O

DISS PR80.32 PR80.33 PR80.34 PR80.35

CHEMETRON PR80.36 PR80.37 PR80.38 PR80.39

OHMEDA PR80.40 PR80.41 PR80.42 PR80.43

DISS

AGSS Terminal Units

Inspital AGSS terminal units are designed according to
safety and performance requirements of EN ISO 9170-2
standard
Technical specifications
• Can be used as under plaster, on plaster or pendant outlet
• Special port to enable safe connection
• Venturi Type Outlet option
• Made of S/S frame and chrome plated brass material

Air Motor
Probe Type BS BS Probe DIN (Venturi Type) DIN Probe Air Motor
Probe
Model No PR80.26 PR80.27 PR80.28 PR80.29 PR80.30 PR80.31 PR81.32 PR81.33

31

31
 7
4 8

3 6
2

1 5

1500,00
92,00
A
136,00

A
Section A-A

Modular Bed Head Units

Colour Options
1- Side Hatch,75 mm
2- Outlets Set White RAL9003
3- Med.Gas Outlet Module, (Single Port) 150 mm
4- Led Lighting Module, 350 mm
5- Electrical Outlets Set, 350 mm Yellow RAL1018
6- Electrical Power Module, (3/4/5 Sockets) 350 mm
7- Electrical Power Module, (Single Sockets) 150 mm
8- Aluminium Shape Light Grey RAL7040

Anthracite RAL7015
32

32
Patient Bed Head Units

Modular Bed Head Units

New generation Inspital bed head units are designed for new
generation hospitals which requires functional, extendable and
modular solutions.

Manufactured according to EN 11197 and fully meets all the

standards of this regulation.

Innovative design of modular bed head units offer:

• Modular structure
• Configurable unit according to customer’s needs
both during the order and after the installation
• Aluminum main frame
• ABS cover (optional anti-bacterial version)
• Wide range of color options
• LED light for reading and ambient lighting
(optional fluorescent light)
• Electrical sockets available for different country standards
• Name plate option on lamp module

Explanation Length Model No

Single bed 1500-1800 mm GB22.30

Double bed 3000-3600 mm GB22.40

33

33
 Patient Bed Head Unit with
Three Channels and Double Lamps,
Inspital Patient Bed Head Units are designed to provide
integrated solutions of medical gas outlets, nurse call systems
and electrical outlets in patient areas.
Our Bedhead Units are designed and manufactured in
compliance with EN 11197 standard.
Each unit is custom manufactured to your specific requirements.

Standard Accessories
• Electrical socket :3 pcs 220 V (BS and DIN)
• Reading lamp :2 pcs
• Power button :1 pc

Explanation Length Model No

Single bed 1500-1800 mm GB22.35
Double bed 3000-3600 mm GB22.45

Patient Bed Head Unit with

Three Channels and Double Lamps,
Inspital Patient Bed Head Units are designed to provide
integrated solutions of medical gas outlets, nurse call systems
and electrical outlets in patient areas.
Our Bedhead Units are designed and manufactured in
compliance with EN 11197 standard.
Each unit is custom manufactured to your specific requirements.

Standard Accessories
• Electrical socket :3 pcs 220 V (BS and DIN)
• Reading lamp :2 pcs
• Power button :1 pc
Explanation Length Model No
Single bed 1500-1800 mm GB22.10
Double bed 3000-3600 mm GB22.20

34

34
Patient Bed Head Units

ICU Type Patient Bed Head Unit with

Double Channel and Double Rail
Inspital Patient Bed Head Units are designed to provide
integrated solutions of medical gas outlets, nurse call systems
and electrical outlets in patient areas, especially in ICU’s.
Our Bedhead Units are designed and manufactured
incompliance with EN 11197 standard.
Standard Accessories
GB22.01
GB22.02
• Electrical socket 6 pcs (BS and DIN)
• Earth node 4 pcs

Explanation
Length Model No
Wall Type
Single bed 1500-1800 mm GB22.01
Double bed 3000-3600 mm GB22.02
Single bed 1500-1800 mm GB22.31
Double bed 3000-3600 mm GB22.32

Explanation Model No
Celiling support
GB22.31
For single BHU GB52.01
profiles
GB22.32 For double BHU GB52.02

35

35
 Motor controlled up
and down movement

3500 rotation

Infusion Carrier

Electric socket

Support rails
Shelf

Model: FX40.25 Model: FX40.20 Model: FX40.15 Model: FX40.10

Double Joint, Motorised Single Joint, Motorised Double Joint Pendant Single Joint Pendant
Pendant Pendant with Double Shelf with Double Shelf

36

36
 Pendants

Pendant Systems
Inspital single joint pendants are designed to provide single point
service for medical gas, electricity and equipment positioning
nearby the patient. Mobility, flexibility and heavy duty design gives
a strong support in operating theatres. Every pendnat is
custom design by our experienced sales support team.
Features
High payload capacities until 1.000 kg
Color coded brake buttons and joints
Optional electromagnetic and pneumatic brake system
Optional bluetooth sound system
Visual indicators for movements
Standard Accessories
• Power Outlet: 8 Number UK, USA, Europe
• Grounding Note: 8 Pcs
• Rail Shelf: 1 Pc
• IV Pole 2 Pcs

980 Optional Accessories

• Shelves
• IV Pole
• Drawer
H2

• Data socket (RJ45)

425
• Pressure gauge for Medical Gases
• Medical gas outlets (BS, DIN, NF)

A
H1 dimensions H2 dimensions H3, H4 dimensions
H1
H1

600 mm 300 mm 500x400

800 mm 500 mm
1000 mm 700 mm
1200 mm 900 mm
H4 H3 205
1100 mm

Model: FX40.05 Model: FX40.15D Model: FX40.20M Model: FX40.10S

Pendant with Monitor Shelf Heavy Duty Double Joint Heavy Duty Motorised Heavy Duty Single Joint
Pendant Pendant Pendant

37

37
 Infusion Pump Pole, IV Pole Infusion Pump Pole with
Double, Rail Type Connector
Explanation Model No Explanation Model No Explanation Model No
Double SR10.22 With Clamp SR10.32 Connector Inclusive SR10.33

Basket, Stainless Steel, Monitor Tray, Rail Type Monitor Tray, Wall Type
Rail Type
Explanation Model No Explanation Model No Explanation Model No
220x220x240 mm FX41.01 Rail Type FX41.03 400 mm Height Adjustment FX41.04
220x400x240 mm FX41.02

Shelf for Pendants Shelf with Drawer for Examination Lamp LED,
Pendants Rail Type
Explanation Model No Explanation Model No Explanation Model No
500 x 400 mm FX41.05 500 x 400 mm FX41.06 Rail Type (LED) LP10.05

38

38
Pendants

Bridge Type ICU Pendant

Inspital bridge type pendants are used to provide medical gas
outlets, electrical outlet and convenient device positioning
around the patient in ICU, recovery and similar departments

Standard Accessories:
Electrical Socket : 6 pcs EUR/UK/USA
Equipment shelf : 3 pcs
IV pole : 1 pc
Drawer : 2 pcs
Optional Accessories:
Medical gas outlets (BS/DIN/NF), data outlet (RJ45),
manometer for medical gases

Technical Specifications
Material : Main frame: aluminum;
Shelves: 1mm steel
Movements : Shelves move horizontally in the rail
and rotate manually
Loading capacity : 50 kg
Color : RAL colors are avaliable
Power Input : 220V AC - 50 Hz
Dimensions : (WxLxH)350x2200 x1300mm
Model: FX40.50

39

39
 Outlet Boxes, On Plaster/ Under Plaster
• Made of 304 quality S/S material
• Suitable to install on plaster / under plaster
• Several length and outlet standard alternatives
On Plaster Under Plaster
Length Outlet Qty
Model Model
PR81.01 PR81.07 310 mm 2
PR81.02 PR81.08 460 mm 3
PR81.03 PR81.09 610 mm 4
PR81.04 PR81.10 760 mm 5
PR81.05 PR81.11 910 mm 6
PR81.06 PR81.12 1110 mm 7

• Without outlets

Plastic Outlet Boxes, Under Plaster

• Made of durable plastic material
• Suitable for under plaster installation
• Several length and outlet standard alternatives

Explanation Length Outlet Qty Model No

Under Plaster 100 mm 1 PR81.17
Under Plaster 250 mm 2 PR81.18
Under Plaster 400 mm 3 PR81.19
On Plaster 100 mm 1 PR81.20

• Without outlets

Medical Gas Hoses

• Special hoses for medical gases
• Made of thermoplastic and rubber material
• Color coding according to EN 739 standard
• Suitable up to 20 bar pressure
• Inner dia: 6,7 mm Outer dia: 12 mm
Hose Type Model No
O2, 250 cm PR81.13
N2O, 250 cm PR81.14
AIR, 250 cm PR81.15
VAC, 250 cm PR81.16

40

40
Medical Gas Outlets and Accessories

Probes
Inspital probes are produced according to international
standards by using a special labelling for gases..
They are used to supply necessary gases from
terminal units to the patient or medical equipments via
hose connections or by direct connection to the equipment.
Inspital Probes are manufactured in compliance with BS
5682:1992, DIN 13260, AFNOR NF S 90-116.
• Manufactured according to BS, DIN & AFNOR standard
• Special connections for O2, N2O, AIR 4 and AIR 7
• Special labeling for each gas type
• Safe hose connection
• Made of chrome plated brass material or Stainless Steel

BS DIN AFNOR DISS CHEMETRON OHMEDA

Stainless Steel JK90.50 JK90.51 JK90.52 JK90.53 JK90.54 JK90.55

Oxygen
Brass JK90.56 JK90.57 JK90.58 --- -- --

Stainless Steel JK90.60 JK90.61 JK90.62 JK90.63 JK90.64 JK90.65

Vacuum
Brass JK90.66 JK90.67 JK90.68 -- -- --

Stainless Steel JK90.70 JK90.71 JK90.72 JK90.73 JK90.74 JK90.75

Air 4
Brass JK90.76 JK90.77 JK90.78 -- -- --

Stainless Steel JK90.80 JK90.81 JK90.82

Air 7
Brass JK90.86 JK90.87 JK90.88 -- -- --

Stainless Steel JK90.90 JK90.91 JK90.92 JK90.93 JK90.94 JK90.95

N2O
Brass JK90.96 JK90.97 JK90.98 -- -- --

Stainless Steel JK91.10 JK91.11 JK91.12

CO2
Brass JK91.16 JK91.17 JK91.18 -- -- --

41

41
 Flowmeters
Inspital offers different models of flowmeters according
to their gas flow scale, connection types and humidity
jars that can be used with oxygen.
Flowmeters can be either connected to medical gas
outlets directly or attached on rail system and connected
to the outlets by flexible hoses.

Size (LxWxH) : 80 x 48 x 145 mm

Inlet : Whitworth GAS 1/8”
Pressure : 4.2 Kgs/cm² – 60 psi – 414 kPa
Flow Rate : 0 - 15 L/min
Humidifier capacity : 200 ml

Flowmeters Without
L/min Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA
Oxygen
Wall type FM20.11 FM20.21 FM20.31 FM20.41 FM20.51 FM20.61 FM20.71
Rail type FM20.12 FM20.22 FM20.32 FM20.42 FM20.52 FM20.62 FM20.72
Dual wall type FM20.13 FM20.23 FM20.33 FM20.43 FM20.53 FM20.63 FM20.73
Dual rail type FM20.14 FM20.24 FM20.34 FM20.44 FM20.54 FM20.64 FM20.74
Air
Wall type FM20.15 FM20.25 FM20.35 FM20.45 FM20.55 FM20.65 FM20.75
Rail type FM20.16 FM20.26 FM20.36 FM20.46 FM20.56 FM20.66 FM20.76
Dual wall type FM20.17 FM20.27 FM20.37 FM20.47 FM20.57 FM20.67 FM20.77
Dual rail type FM20.18 FM20.28 FM20.38 FM20.48 FM20.58 FM20.68 FM20.78

42

42
Respiration Equipment

Flowmeters
Inspital flowmeters are instant flow measurement devices
regulating the dosage of medical gases particularly
suitable in Oxygen therapy.
• Pre-calibrated and measurement tube types
• I/O switch for immediate locking and reactivating
• Large siz adjusting knob with soft grip

Size (LxWxH) : 61x107x175 mm

Gas supply pressure : 280÷600 kPa
Gas options : O2, Air
End of scale values : 15 L/min.
Flow calibration data : 1013 mbar 23 °C

Flowmeters Calibrated Mobile

Flowmeters

Variable Area
Flowmeters Without
15 L/min Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA
Wall type FM21.11 FM21.21 FM21.31 FM21.41 FM21.51 FM21.61 FM21.71
Rail type FM21.12 FM21.22 FM21.32 FM21.42 FM21.52 FM21.62 FM21.72
Dual wall type FM21.13 FM21.23 FM21.33 FM21.43 FM21.53 FM21.63 FM21.73
Dual rail type FM21.14 FM21.24 FM21.34 FM21.44 FM21.54 FM21.64 FM21.74

Calibrated
Orifice
Flowmeters Without
15 L/min Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA

Wall type FM21.15 FM21.25 FM21.35 FM21.45 FM21.55 FM21.65 FM21.75

Rail type FM21.16 FM21.26 FM21.36 FM21.46 FM21.56 FM21.66 FM21.76
Dual wall type FM21.17 FM21.27 FM21.37 FM21.47 FM21.57 FM21.67 FM21.77
Dual rail type FM21.18 FM21.28 FM21.38 FM21.48 FM21.58 FM21.68 FM21.78

43

43
 150 ml 120 ml 355 ml

Flowmeter Humidifier Bottle

• Designed to humidify oxygen before patient’s
150 ml 300 ml 120 ml 355 ml
respiration
Model No FM21.80 FM21.84 FM21.82 FM21.83
• Made of polycarbonate and scaled
• Sterilizable up to 121 °C For 15 min
• 120, 150, 300, 355 ml capacity options
• Connection to Flowmeter : Moving pipe union
• Lid material : Plastic
• Integrated relief valve

Oxygen Mask and Hose

• Oxygen concentration delivered is 40%-60%
depending on the patient’s breathing. The masks are
connected directly to a compressed air or oxygen
supply. The products are intended for single use only.
• 2.1m oxygen tubing
• Mask, oxygen tubing material: Polyvinyl chlorid

Model No Explanation
AT20.60 Adult
AT20.61 Pediatric
AT20.62 Hose
44

44
Respiration Equipment

Probe with Manometer

• Chrome plated brass trunk
• Flow adjustment knob
• Pressure or vacuum gauge
• Gas specific connection port
• Suitable outlet for hose connection

Without
Gas Type Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA

Oxygen FG50.10 FG50.11 FG50.12 FG50.13 FG50.14 FG50.15 FG50.16

Nitrous Oxide FG50.20 FG50.21 FG50.22 FG50.23 FG50.24 FG50.25 FG50.26

Vacuum FG50.30 FG50.31 FG50.32 FG50.33 FG50.34 FG50.35 FG50.36

Medical Air 4 FG50.40 FG50.41 FG50.42 FG50.43 FG50.44 FG50.45 FG50.46

Medical Air 7 FG50.50 FG50.51 FG50.52 FG50.53 FG50.54 FG50.55 FG50.56

Vacuum Regulators
• On / Off lever for instant vacuum cut
• Autoclavable safety jar to avoid fluid leakage into
central vacuum line
• Chrome plated brass trunk
• Easy to read vacuum gauge
• Flow adjustment knob

Without
Gas Type Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA

Vacuum FG51.01 FG51.02 FG51.03 FG51.04 FG51.05 FG51.06 FG51.07

45

45
 Vacuum Regulator
• The regulator is made of a strong techno-polymer body, with
a quick I/0 switch-button, a suction adjustment knob and a
control vacuum gauge with three possible end-of-scale
choices: -250 mbar pediatric and -1000 mbar.
• De-pressure Safety valve inclueded
• Autoclavable safety jar to avoid fluid leakage into central
vacuum line

• Max. suction flow - 1000 : 115 L/min at -950 mb

• Max. suction flow - 250 : 50 L/min at -220mbar
• Vacuum gauge : 0 + -1000 mbar
• I/O switch : Quick push switch button

Without
Gas Type Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA
Vacuum - 1000 mbar FG52.10 FG52.11 FG52.12 FG52.13 FG52.14 FG52.16 FG52.15
Vacuum - 250 mbar FG52.20 FG52.21 FG52.22 FG52.23 FG52.24 FG52.26 FG52.25

Venturi Type Vacuum Regulator

• Designed to provide vacuum by using compressed air or
oxygen source
• Chrome coated brass trunk
• Avaliable in BS, DIN, AFNOR, DISS and OHMEDA standards
• Max Suction Flow: 25L/min at-775 mbar
• Gas Consumption at max Scution : 60L/min

Without
Gas Type Adaptor BS 5682 DIN 13260 NF 90 116 DISS CHEMETRON OHMEDA

Medical Air FG53.01 FG53.02 FG53.03 FG53.04 FG53.05 FG53.07 FG53.06

46

46
Respiration Equipment

Oxygen Therapy Device

Inspital Oxygen Therapy Device is appropriate to use in
hospitals, emergency services and homecare units.
This device is designed to adjust and control the
oxygen flow.

• Chrome plated brass trunk

• High resistant polycarbonate humidifier bottle suitable
for sterilization
• Maximum gas supply pressure : 200 bar
• Regulator Outlet Pressure : 3.5 - 4 bar
• Adjustable Flow : 0 - 15 L/min
• Pressure Gauge Range : 0 - 315 bar
• Sterilization Method : 121 °C

Bull Nose DIN PIN INDEX

Model No FM21.86 FM21.87 FM21.88

Oxygen Therapy Device Calibrated

• Max. gas supply pressure : 200 bar
• Regulator Outlet Pressure : 3.5 - 4 bar
• Adjustable Flow : 0 - 15 L/min
• Pressure Gauge Range : 0 - 315 bar
• Pressure reducer assy : Double stage with shutter system
• Flow setting data : 1013 mbar 23 °C
• Side gas outlet connection

Bull Nose DIN PIN INDEX

Model No FM21.69 FM21.79 FM21.89

47

47
 Oxygen Therapy Device
Inspital Oxygen Therapy Device is appropriate to use in
hospitals, emergency services and homecare units.
This device is designed to adjust and control the
oxygen flow.

• Chrome plated brass trunk

• High resistant polycarbonate humidifier bottle suitable
for sterilization
• Maximum gas supply pressure : 200 bar
• Regulator Outlet Pressure : 3.5 - 4 bar
• Adjustable Flow : 0 - 15 L/min
• Inlet Pressure Gauge Range : 0 - 315 bar

Bull Nose DIN PIN INDEX

Model No FM21.96 FM21.97 FM21.98

Laboratory S/S Regulator

• Line groups with body valve
• Inlet pressure : 0 - 40 bar
• Outlet Connection : R 3/8”
• Adjustable Pressure : 0-10 bar & Argon 1,5 bar
• Stainles diaphragm

Inlet
Model No Gas type Gas flow
Connetion
GZ70.80 Oxygen 70 m³/h R 1/4 NPT
GZ70.81 Nitrogen 70 m³/h R 1/4 NPT
GZ70.82 N2O 70 m³/h R 1/4 NPT
GZ70.83 Argon 1,5 bar 15 m³/h R 1/4 NPT
GZ70.84 CO2 12 m³/h R 1/4 NPT
GZ70.85 Helium 40 m³/h R 1/4 NPT
GZ70.86 Hydrogen 55 m³/h R 1/4 NPT
GZ70.87 Dyr Air 15 m³/h R 1/4 NPT

GZ70.88 Mixed 60 m³/h R 1/4 NPT

48

48
Respiration Equipment

Pressure Regulators
• Double stage stainless
• Inlet pressure : 0 - 230 bar
• Outlet Connection : R 3/8”
• Adjustable Pressure : 0-10 bar Argon 1,5 bar
• Stainles diaphragm,

Sigle Double Inlet

Gas type Gas flow
Model Model Connetion
GZ70.60 GZ70.70 Oxygen 30 m³/h R 3/8”
GZ70.61 GZ70.71 Nitrogen 30 m³/h R 5/8” Inner
GZ70.62 GZ70.72 Argon 30 m³/h R 5/8” Inner
GZ70.63 GZ70.73 CO2 11 m³/h W21, 80X1/14
GZ70.64 GZ70.74 Helium 70 m³/h R 5/8” Inner
GZ70.65 GZ70.75 Hydrogen 90 m³/h W21, 80X1/14 Left
GZ70.66 GZ70.76 Dyr Air 30 m³/h R 3/8”
GZ70.67 GZ70.77 N2O 30 m³/h R 3/8”

Ventilator Regulators
Design to use with ventilator and direct oxygen
supply at emergency, ICU and ambulances.

• Maximum gas supply pressure : 200 bar

• Regulator Outlet Pressure : 3.5 - 4 bar
• Pressure Gauge Range : 0 - 315 bar

Bull Nose DIN PIN INDEX

Model No FM21.91 FM21.92 FM21.93

49

49
 Vacuum
Connection port
Patient port
Sampling port

Canister

1L 2L 3L
Reusable Canister

Model No Explanation • Suitable for high vacuum applications

AT20.01 Canister, 1 L • New generation easy to use & hygienic system
• Antibacterial & hydrophobic self-sealing filter for
AT20.02 Canister, 2 L
extra safety
AT20.03 Canister, 3 L
• Easy connection to central vacuum system
AT20.04 Reusable lid
50

50
Suction Accessories

Model No Explanation

AT80.10 Suction Liner, 1 L

AT80.20 Suction Liner, 2 L
AT80.30 Suction Liner, 3 L
AT80.11 Suction Liner With Antifoam, 1 L 3L
AT80.22 Suction Liner With Antifoam, 2 L The canisters are made in three sizes, to be used
AT80.33 Suction Liner With Antifoam, 3 L according to the effective requirements about the volumes
expected to be suctioned, and they are manufactured in three
AT80.91 Suction Liner With Solidifying Agents, 1 L
different versions: suction liner, antifoam, solidifying agents.
AT80.92 Suction Liner With Solidifying Agents, 2 L
AT80.93 Suction Liner With Solidifying Agents, 3 L Suction liner with solidifying allow us to avoid from
liquid decontamination. Suction liner with antifoam finish
Suction Liner all foam on liqud and that take advantage to use liner
• No contact with patient. more efficency.
• Liner and lid are made of durable plastic.
• Liners are flexible
• In bags, optionally, disinfectant, foam inhibitor and
Solidifying agents are avaliable.

Suction Liner Manometer Probe

• That allows to open and close to suction
from top of suction liner.
• Manometer and without manometer options

51

51
 Rail Attachment Silicone / PVC Tube Yankauer Tipped Hose
Explanation Model No Explanation Model No Explanation Model No
For 25 x 5 mm Rail AT20.37 8 x 14 mm (silicone) AT20.47 1,8 Meter Hose AT20.40
6 x 11 mm (silicone) AT20.46 Suction Cannula tip AT20.41
8 x 12 mm (PVC) AT20.44
10 x 14 mm (PVC) AT20.45

Wall Attachment Vacuum Control Connector Suction Cannula, Plastic

Explanation Model No Explanation Model No Explanation Model No
Wall Attachment AT20.50 Control Connector AT20.54 Non-Sterile AT20.55

Suction Liner Manometer Probe Tube Connector Kapkon Connector

Explanation Model No Explanation Model No Explanation Model No
Manometer AT20.78 Non-Sterile AT20.52 Kapkon Connector AT20.53
Without Manometer AT20.79

05
01. Rail
01 03
02. Bolt
03. Plastic Interconnect 04
04. Expansion bolt

02

Rail
Explanation Model No
52 1 meter AT20.56

52
Suction Accessories

Central Vacuum System

• Integrated vacuum regulator

• Liner and lid are made of durable plastic.
• Trolley with 4 pcs vacuum jar capacity
• Polycarbonate, transparent vacuum jars with silicone hoses
• Sterilizable jars at 121°

Model No Explanation
AT20.75 S/S frame, 4 port
AT20.75C Powder coating frame, 4 port
AT20.75P Powder coating frame, 1 port

AT20.75 AT20.75P

1. Patient port - The patıent port allows the suction of fluids and all its
content safely
2. Suction kit - Inspıtal suction system has wide range of accessories for
different suction applications
3. Vacuum port - This port connects to vacuum source coming from surgical
suction device or central vacuum station line
4. Filter - Inspıtal suction liners are equipped with hydrophobic filter which
work as an overflow valve and antibacterial barrier. It also keeps the
electrosurgery smoke in the liner and protects the operation environment

Surgical Suction Jar

• Made of transparent polycarbonate material
• 1L and 2 L carrying capacity alternatives
• Sterilizable jars at 1210 C
• Adapter for wall connection
• Integrated hydrophobic filter

Model No Capacity
AT20.85 5L
AT20.83 3L
AT20.82 2L

53

53
 Analog System

Nurse Call Panel

The Nurse Call Panel is an intelligent unit with a microcontroller RTC and E^2. It can
operate by itself or with a connection to a PC. Mode settings are available. It displays upt
to 5 calls at and displays the time, and temperature. The system communicates via RS485
modules. Other adjustments can be performed manually through a PC connection.

Model: GB22.70

Bedside Call Unit

The Bedside Call Unit is used patient rooms. There are backlit call and cancel buttons on
the unit. In an emergency, a patient uses the call button to make an emergency call which
appears as an alert on the Nurse Control Panel. Typical locations for this unit are on
the walls of patient rooms and living areas as needed.

Model: GB22.76

Basic Handset
The Basic Handset allows the patient’s condition to be reported quickly to the hospital staff
in an emergency situation. It is easy to use and reinforced with auxiliary visuals. The device
works through connection to the Bedside Call Unit. Easy-to-understand images indicate the
functions of the buttons. Thanks to LEDs on the unit, the product is easily noticeable in the
dark. These LEDs vary according to the last call made.
Model: GB22.72

Pull-cord Call Unit

The Pull-cord Call Unit is used in patient bathrooms or similar areas. There is a
backlitcancel button and an emergency call pull-cord on the unit. In an emergency, a patient
pulls the cord making an emergency call. This appears as a WC Emergency Call on the
Nurse Control Panel.The system gives priority to WC Emergency calls and they appear
before other calls.
Model: GB22.78

Over Door Light

The Over Door Light is located above the patient room door in the corridor. Its half-sphere
shape makes it easily noticeable from any angle of view. If there is an emergency in the
room, it can be seen clearly from the corridor. It can warn with three main colors,
red, green,and blue, and combinations of these, depending on the call status of the room.

Model: GB22.80

Room Control Unit

The Room Control Unit is suitable for surface montage. Can support 4 beds,
1 WC, and 1 bath/shower by default. It can operate without external power supply.
Model: GB22.75

Light Control Unit

The Light Control Unit is a module that must be added to a system when control of room
lighting/reading lamp through patient handsets is requested. This module supports
up to 4 beds..
54
Model: GB22.82

54
Nurse Call System

55

55
 IP System
Room Control Unit 5”
This unit ensures communication between the Nurse Control Panel and the call buttons in
patient rooms. The Room Control Unit is suitable for both flush and shallow montage. It
features a 5’’ touchscreen and a built-in Mifare card reader. Optionally a basic task list
can be accessible from the onscreen menu.

Model: GB22.83

7” Nurse Control Panel

The statuses of all working Room Control Units connected to the panel can be monitored
actively. All errors and notifications shall be displayed on the information panel. Emergency
codes, WC calls, and normal calls may be monitored. All processes passing through the
system are logged.

Model: GB22.84

Pro Handset
The Pro Handset is designed to inform the staff of the patient’s condition immediately.
• Easy to use
• Works though connection to Bedside Call Unit
• TV control option (Channel and Volume)
• EL lights allow visibility in the dark
• Function buttons help to control room lighting, reading lamp, window blinds, etc.
Model: GB22.85

Code Blue Unit

The Code Blue Unit is mounted on the wall as needed in the hospital. There are backlit call
and code blue buttons on the unit. The call button may be pressed to initiate a nurse call
which appears as an alert on the Nurse Control Panel. The code blue button may
be pressed to start a Code Blue call. The same button can be configured as an
assist call button.
Model: GB22.86

Over Door Light

The Over Door Light is located above the patient room door in the corridor. Its half-sphere
shape makes it easily noticeable from any angle of view. If there is an emergency in the
room, it can be seen clearly from the corridor. It can warn with three main colors,
red, green,and blue, and combinations of these, depending on the call status of the room.

Model: GB22.81

56

56
Nurse Call System

Reporting and Management Server

The server controls the operation of the Comfort, Versatile Plus, Versatile, and Air Plus
(optional) systems used in hospitals. The server provides log reporting through a web
interface and enables integration with other systems used throughout the building. Our
servers have a Linux-based robust and reliable infrastructure.

Model: GB22.87

System
Block diagram

57

57
 Wireless System
Dot Matrix Panel
• Displays 4 calls in order of priority (others wait in queue)
• Adjustable 5 digits can show floor, room, bed number, etc.
• Color LEDs indicate call type
• Supports up to 64 beds
• Audible alerts according to call type
Model: GB22.71

Signal Repeater
It is used with the purpose of expanding the coverage area if the distance between the
patient call units and the nurse panel is excessive. There is no restriction on the number of
repeaters to be used in the environment. Requires external 5V Supply.

Model: GB22.74

Signal Repeater
It is used with the purpose of expanding the coverage area if the distance between the
patient call units and the nurse panel is excessive. There is no restriction on the number of
repeaters to be used in the environment. Requires external 5V Supply.

INSPITAL Wireless Reporter Software

With the Reporter software, the calls made on system can be logged and reported. The
software also doubles as a monitor for receving calls, displaying calls in priority order with icons and colors indicating
the call type: Nurse Call, Nurse Presence, WC Call, and Code Blue

• The software can be muted and unmuted with a single button. It features a Night Service toggle to forward all calls
received to another panel.
• There is also a feature to set custom reminder alarms.
• All of the call logs and reminder logs can be viewed and filtered.
• Pager and Forwarding Panel settings can be configured.
• The program also allows names to be given to specific call points so that that name will appear in the logs and the
call receiving scree

58

58
Medical Gas Test Kits

Medical Gas Test & Commissioning Kit

• A complete set all in one box to carry out Test &

Commissioning
• Includes Digital Pressure & Flow, AGSS Test &
Commissioning, Male Anti Confusion NIST, Anti Confusion
Probes and Standard Purging test kits
• In compliance with HTM02-01 and relevant European
Standards and all preceding standards.

Model:GZ75.01

Anti Confusion Probes

• Set of six stainless steel gas specific probes
• Gases include O2, O2/N2O, N2O, Air-4 Bar, Air-7
Bar, Vacuum
• Calibrated to BS 5682In compliance with HTM02-
01 and relevant European Standards and all preceding
standards
Model:GZ75.02

Anti Confusion NIST Probes

• Set of six or nine stainless steel gas specific NIST probes
• Gases include O2, O2/N2O, N2O, Air-4 Bar, Air-7 Bar,
Vacuum
• Nine includes CO2, N, HEO2 (Carbon Dioxide,Nitrogen,
Heliox)
• Calibrated and manufactured to current industry standards
Model:GZ75.03

Filter

Standard Particulate and Purging Kit Pressure Drop Test Gun

• 75/150Lpm flow rate jets • Measures pressure losses at NIST or Outlet Point
• Hydrophobic Membrane 47mm filter papers, 0.45(µm) • Lockable valve to prevent tampering
pore size • Ideal to test at AVSU and Manifold points
• In compliance with HTM02-01 and relevant European q • 20054D Digital Pressure Gauge or Conventional
Standards and all preceding standards Analogue Gauge

Model:GZ75.04 Model:GZ75.05 59

59