Erd 500
Erd 500
Erd 500
50 Hz
TECHNICAL SPECIFICATIONS
GENERAL DATA
No CYLINDERS 8
INJECTION direct
SUCTION TURBO
LUBRICATION SYSTEM
VENTILATION SYSTEM
ELECTRICAL SYSTEM
VDC (V) 24
GENERAL DATA
No POLES 4
No WIRES 12
INSULATION H
Xd (%) 250.00
X 11.40
75% 93.20
100% 131.30
DIMENSIONS (MM)
CAPACITIES
General Description
“ERGA” generator set is an electrical energy generating machine which is used
in places where there is no mains supply or when there is a MAINS failure.
The mobile elements, distribution belt, fan, etc., and those parts which reach high
temperatures during operation, exhaust manifold, etc, include their corresponding
protections, in compliance with the requirements of the Machinery Directive
2006/42.
Regulations
The machine holds the “CE” marking, and the corresponding Declaration of
Conformity is issued with each of them, in which it specifies that the machine
complies with R.D 842/2002 Low Voltage Regulations and with the European
Directives:
2006/42 on Safety in Machinery.
2006/95/CE on Electrical Safety.
2004/108/CE on Electromagnetic Compatibility.
2005/88/CE on NOISE EMISSIONS by equipment for outdoor use (for SOUNDPROOF
GENERATOR SETS)
SCOPE OF SUPPLY
ENGINE:
Coolant temperature
Fuel level
Operating hours
Oil pressure
Battery voltage
Number of start-ups
Turning speed (rpm)
Battery alternator voltage
ALTERNATOR:
Voltages between phases and
between phases and neutral.
Intensities
Reactive Power (kVAr)
Apparent Power (kVA)
Cos phi
Frequency
Active energy meter (kW-h)
Active Power (kW)
MAINS
Frequency
Voltages between phases and (L1-L2, L2-L3, L1-L3).
Phase rotation order
Voltages between phases and neutral (L1-N, L2-N, L3-N).
Earth current Voltages between phases and between phases and neutral.
Intensities
Reactive Power (kVAr)
Apparent Power (kVA)
Cos phi
Frequency
Active energy meter (kW-h)
Active Power (kW)
ENGINE
Low oil pressure
Failure of the alternator to charge batteries
High coolant temperature
Low fuel level
Low and High battery Voltage
ALTERNATOR
OTHER CHARACTERISTICS
Programmer Clock with multiple maintenance events which can be configured for the
optimal operation of the engine. Weekly and/or monthly programming of up to 16
starts
and stops per week.
USB connectivity
Modbus RTU