V TUEV Rheinland 7th Int SPS Symposium e
V TUEV Rheinland 7th Int SPS Symposium e
V TUEV Rheinland 7th Int SPS Symposium e
Programmable Electronic
Systems in Safety Related
Applications
May 3 – 4 2006
Cologne - Germany
In cooperation with:
Bernstein AG, D – Bernecker + Rainer Industrie Elektronik, A - Elan Schaltelemente GmbH &
Co. KG, D - Endress + Hauser Messtechnik GmbH & Co. KG, D - GE Fanuc Automation
Solutions Europe S.A., LUX - HIMA Paul Hildebrandt GmbH & Co. KG, D - infoteam Software
GmbH, D - innotec GmbH, D – Invensys, USA - KW-Software GmbH, D - Metso Automation,
Finnland – Phoenix Contact GmbH & Co. KG, D – Rockwell Automation, USA – Sick AG, D -
Siemens AG, D - Yokogawa, Japan/NL
7th International Symposium
Programmable Electronic Systems in Safety Related Applications
Scope In the past years, the automation industry was able to realize development
opportunities and to achieve major growth, both in the national and the
international arena.
The implementation of safety-related automation applications including
programmable systems is a standard in most application areas. This includes
programmable controllers, field devices, bus systems and their configuration
and programming by the user. The functional safety of these devices in
operation has to be guaranteed for the protection and safety of persons,
environment and systems.
International standards, as for example the IEC 61508, IEC 62061, IEC 61511, IEC
61131 und EN 954/ ISO 13849 describe requirements, which have to be fulfilled
during development and use of systems. The safety management of the
complete life cycle of complex applications and devices is gaining more and
more importance.
Target groups Manufacturers and designers of safety related systems; planners and
constructors of safety relevant installations; operating companies;
testers, experts; approval authorities.
2 pm Partial Stroke Testing - The Good, the Bad and the Ugly
Robin McCrea-Steele, PCS Premier Consulting Services / Invensys, USA
2:30 pm
Reducing the Window of Potential Failure for Emergency Shutdown and
Venting Valves by Automatic Partial Stroke Testing Device
Janne Laaksonen, Metso Automation Oy, Finland
3 pm
Integrated SIL-Assessment
Udo Hug, Infraserv Wiesbaden Technik GmbH & Co. KG, D
3:30 pm Product Presentations
8:30 am Modern Fault Tree Analysis Put to Test: A Comparison between 1975 and
Today
Ariane Sutor, Oliver Mäckel, Reinhard Lehnst, Siemens AG, D
11 am Coffee Break
Offshore Oil and Gas Safety System Considerations for Applying TUV
11:30 am
Safety Certified PLC's
Thomas Walczak, GE Fanuc Automation, USA
12:00 am Experiences in Obtaining SIL-3 Certification for Level Gauge Instruments
for Liquefied Natural Gas Storage Tanks
Laurent Monfiliette, Whessoe, France
Pieter Versluys, Whessoe, France
1 pm Lunch
2 pm Workshops
Workshop III Quantitative Methods for Validating Safety Integrity Levels (SIL) of Safety
Instrumented Functions (SIF)
Robert A. Adamski, PCS Premier Consulting Services – Invensys, USA
4 pm End of Symposium
Copy example
not later than three weeks before begin of symposium to:
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein · D-51105 Köln · Fax: +49-221-806-1539
Surname ________________________________________________________
Position ________________________________________________________
Company ________________________________________________________
Address ________________________________________________________
________________________________________________________
Phone ________________________________________________________
Fax ________________________________________________________
Workshop I
Workshop II
Workshop III
Workshop IV
Workshop V
Date, Signature
Important Information for Participants
Conditions of participation
Registration Arrangements
Please register in writing or by fax using the enclosed The organizer reserves the right to substitute speakers
registration form. You will then receive a confirmation of and/or postpone the conference or make changes to the
your registration and details of how to get to the programme.
symposium.
Liability
The final date for receipt of registration is three weeks If an event must be cancelled due to reasons for which
prior to the start of the conference. Your registration is TÜV Rheinland Industrie Service GmbH, ASI, is
binding as soon as it has been confirmed in writing. answerable, only fees which have already been paid will
be refunded. Further claims are excluded.
The number of participants is limited. Please ensure your For damages for which is TÜV Rheinland Industrie Service
participation by early registration. GmbH, ASI, is answerable, the company shall only be
liable in so far as – it is found guilty of intent and/ or gross
negligence.
Cancellation of Registration
Cancellation of registration must be submitted in writing.
Hotelreservation
Please understand that due to the limited number of
participants, we are obliged to retain 50 % of the fee as a We have prepared a list of hotel recommendations
cancellation which arrive later than 14 days before the start concerning various categories. You will receive this list
of the conference and participants who leave during the together with the confirmation of your participation or
conference. The entire fee must be paid in case of contact +49 – 221 – 806 2981.
cancellations which arrive later than 7 days before the start
of the conference and participants who leave during the
conference.
Note
With regard to the Bundesdatenschutzgesetz (data
Fee protection law) please note that your personal details will
be stored so that we can send you information from the
€ 650 plus VAT. TÜV Rheinland Industrie Service GmbH, ASI
For early registration until March 31, 2006
€ 550 plus VAT