Product98769 FSEDP Dome Splice Enclosure Rev1.0 (Oct18)
Product98769 FSEDP Dome Splice Enclosure Rev1.0 (Oct18)
Product98769 FSEDP Dome Splice Enclosure Rev1.0 (Oct18)
General Description
Fiber Optic splice enclosures are meant for housing and protecting the splices of fiber optic cables.
These enclosures are normally with IP68 rating thus suitable for outdoor or harsh environment
application. This product adopts a fully-mechanical sealing structure thus it do not need the use of any
other sealing materials except the silicone rubber sealing gasket provided to ensure the good sealing
performance for fiber cable with diameter 13mm or less. The enclosure comes with different cable
entrances sizes; the big cable entry is used for the sealing of uncut direct transmission fiber cable, while
the small cable entry is used for soft cables or general branching cables. The installation can be in
underground, aerial, wall-mounting, pedestal or direct buried, man-hole mounting and duct-mounting
applications. It is able to support up to 144 single fibers which can cover most of the applications in the
long-distance transmission and local fiber distribution networks, like Fiber to the Home / Fiber to the
Curb (FTTH/FTTC).
Features
• Sealing device of the enclosure adopts self-impacted hoop which can be sealed perfectly when
the hoop is fastened
• Support different sizes of cables for both single core and ribbon fiber types
• Pole-mounting, aerial and direct buried applications
• Adequate space for storage of fibers
• Made of high grade material (RoHS compliant) thus have long lifespan
• Support up to 5 cables entry and 144 splices
• IP68 rated to water depth 1.5 meter
All dimensions are approximate, subject to technical and dimensional changes without notice.
Ordering Information
Model Description
Standard accessories: box 1 set, sealing gasket 1 set, splice tray 1 set, cable fixing device 1 set,
splice protective sleeve, nylon tie 12 pieces, sand paper, and silver paper, wet tissue 1 bag,
insulation tape.
Optional accessories: Grounding wire 1 set, valve 1 set, aerial mounting hoop 1 set, pole-
Mounting hoop, heat shrink tubes 4 pieces, separator 1 piece, grounding wire for armour cable 6
pieces, protective tube.