Aerazur 2102250
Aerazur 2102250
Aerazur 2102250
Tel: + 33 1 61 34 23 23 – Fax: + 33 1 61 34 24 23
http://www.zodiacaerospace.com
CAGE Code: F6101
LIFE JACKET
210225-0 C10 E
210224-0 C10 E
210225-1 C10 F
210225-2 C10 F
210228-0 C10 E
This document is AERAZUR’s property. It can neither be copied nor divulged without AERAZUR’s consent.
25-65-09 REV 13
T-1
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
T-2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
RECORD OF REVISIONS
MANAGEMENT OF REVISIONS:
Revision number and validity: Revision 01 Draft distribution
Revision 02 à 09 Draft modifications
Revision 10 Original issue of the approved manual
Revision 11 First revision of the manual
Revision 99 89ème revision of the manual
Retain this record in the front manual. On receipt of a revision, insert the revised pages into the
manual, and enter the revision number, date inserted, and initials.
25-65-09 REV 13
The document reference is online, please check the correspondence between the online documentation and the printed version.
RR - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
RR - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
SBR - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
SBR - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 13
LEP - 1
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 13
LEP - 2
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
TABLE OF CONTENTS
PAGE
DESCRIPTION AND OPERATION ................................................................................................. 1
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
TC - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
TC - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
GLOSSARY OF ABBREVIATIONS
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
GA - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
GA - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
FIGURE OF KNOTS
Overhand knot (O) Boatswain’s knot (BO) Half Hitch knot (HH)
Bowline knot (B) Bowline knot + Overhand knot Bowline knot + Half Hitch knot
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
FK - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Eight knot (E) Eight knot – 2 strands (E2) Slip knot (S)
Reef knot (R) Loop knot (L) Larks head knot (LH)
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
FK - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
F6101 AERAZUR
61, RUE PIERRE CURIE – CS 20001
78373 PLAISIR CEDEX FRANCE
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
TVC - 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
TVC - 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
1. General
The AERAZUR C10 life jacket is designed to provide flotation for an adult or a child over
3 years in the event of evacuation from a ditched aircraft.
It enables users to await rescue and to signal to rescuers by using the fitted accessories.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
C. Markings
Appl.A: the markings are on the battery holder.
Appl.B, C and D: the markings are on both sides of the buoyancy chamber itself.
NOTE : The buoyancy of life jacket C10F can be screen-printed with "Airline Company
Property" (optional).
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 2
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
1. Buoyancy chamber
2. Lamp
3. Belt
4. Markings
5. Battery
6. Battery holder
7. Battery pull tab (removed during assembly)
8. Inflator pull tab
9. Inflator and valve base
10. CO2 cylinder
11. Inflator sheath
12. Inflation tube
13. Mouthpiece
14. Tear-off tab
15. Carrying bag
16. Markings (option : Airline Company Property) (C10 F only)
17. Whistle (C10 F only)
18. Label
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 3
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Figure 2 – Appl.B: C10E and C10F (before S/N 45000) (non procurable)
1. Buoyancy chamber
2. Lamp
3. Markings
4. Battery pull tab
5. Belt
6. Battery
7. Inflator pull tab
8. Welded inflator
9. CO2 cylinder
10. Inflation tube
11. Mouthpiece
12. Tear-off tab
13. Carrying bag
14. Markings (option : Airline Company Property) (C10 F only)
15. Whistle (C10 F only)
16. Label
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 4
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
1
10 11
14
9 2
15
13
8 12
3
6
4
4
5
1. Buoyancy chamber
2. Lamp
3. Markings
4. Belt
5. Battery
6. Inflator pull tab
7. Welded inflator
8. CO2 cylinder
9. Inflation tube
10. Mouthpiece
11. Tear-off tab
12. Carrying bag
13. Marking (option : Airline Company Property)
(C10 F only)
14. Whistle (C10 F only)
15. Label
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 5
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
2
10
9 11
8
7 3
6
4
5
1. Buoyancy chamber
2. Lamp
3. Markings
4. Belt
5. Battery
6. Inflator pull tab
7. Welded inflator
8. CO2 cylinder
9. Inflation tube
10. Mouthpiece
11. Carrying pouch
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 6
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
3. Technical features
A. Buoyancy 17daN
B. Weight 0.5kg
C. Dimensions (packed)
Appl.D: 250x160x60mm
4. Operation
In emergency evacuation conditions, the operating sequence is as follows:
Pull the bag’s tear-off tab in order to open it;
Remove the life jacket;
Put the life jacket around the neck;
Put both ends of the belt around the waist;
Lock the buckle;
Adjust the belt by pulling on the fixed end;
Withdraw the pull tab plug from the battery by pulling its marker tag
(before S/N 45000);
Pull the inflator pull tab firmly downwards in order to inflate the buoyancy chamber;
The inflation tube can be used by the user to maintain buoyancy or as an emergency
means of inflation.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 7
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 8
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
1. General
The following tests must only be carried out in dry and well-ventilated premises. For the
testing equipment required, refer to the “SPECIAL TOOLS, FIXTURES AND EQUIPMENT
MATERIALS” section.
Use a source of compressed air free of oil and humidity and fitted with a 20 micron filter.
2. Tests
A. Overpressure test
This test must be done before the leakage test. After the test, no deterioration in the seams
or in the fabric must be noted.
Appl.A
1 - Remove the CO2 cylinder, the inflator assembly and the inflator sheath and in their
place fit an inflation connector;
2 - Inflate the buoyancy chamber up to 420hPa;
3 - Readjust the pressure after 30 seconds;
4 - After 5 minutes, the pressure must not be below 400hPa. If it is, look for the cause
and refer to the “REPAIR” section;
5 - Remove the inflation connector and deflate the buoyancy chamber with a vacuum
pump or a vacuum cleaner;
CAUTION : AVOID THE CREATION OF WRINKLES DURING DEFLATION.
6 - Fit and tighten the inflator sheath, the inflator assembly and the CO2 cylinder.
Ensure that the gaskets are present and in good condition (fit new gaskets).
Appl.B, C and D
1 - Fit the inflation tool to the mouthpiece;
2 - Carry out operations (2) to (5) described above.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 101
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
B. Leakage test
(1). Proceed in the same way as for the overpressure test, complying with the following test
conditions:
12 hours after overpressure test.
Test pressure: 140hPa.
Result: after 12 hours the corrected pressure must not be below 105hPa. The
corrected pressure takes variations in atmospheric pressure and temperature into
account :
Correct the pressure reading as follows :
b 273
Pc = (c e ) a
d 273
a:
Initial barometric pressure (hPa)
b:
Initial temperature (°C)
c:
Final barometric pressure (hPa)
d:
Final temperature (°C)
e:
Final pressure in the buoyancy chamber
(pressure gauge reading ,hPa)
NOTE : Alternative : reduce final pressure by 4 hPa if temperature is increased by 1°C
(4hPa increase by 1°C drop) and adjust this pressure in case of variation of
atmospheric pressure during test (e.g. –1hPa if atmospheric pressure drop
by 1 hPa)
(2). The Life jackets that do not pass this test will be reinflated to 140hPa and immersed in
clear water (or moistened using leak detector fluid) in order to locate the leak. Repair in
accordance with the “REPAIR” section and repeat the test.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 102
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
3. Fault isolation
B. INFLATOR
When the CO2 cylinder has Presence of parasite material in the Clean with compressed air.
been removed, the lever does inflator. If the fault persists, replace
not operate freely the inflator.
(Appl.A only).
Corrosion of an internal part of the Change the inflator.
inflator.
NOTA: for Appl.B, C and D, replace the jacket in case of faulty welded inflator
(parasite material in the inflator, for instance).
B. Additional operations
(1). Checking the rescue light system and its components is detailed in the
“INSPECTION/CHECK” section.
(2). After overhaul, the life jacket is repacked in its carrying bag, in accordance with the
instructions in the “ASSEMBLY (INCLUDING STORAGE)” section.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 103
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 104
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
DISASSEMBLY
1. General
For the testing equipment required, refer to the “SPECIAL TOOLS, fixtures and
EQUIPMENT MATERIALS” section.
The work table must be clean and adequately lit. It must be covered with a protective
material and free from all objects likely to perforate or tear the life jacket.
2. Procedure
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 301
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
4
Lamp
8
12
10
7
9
2
11
6
3
1
Battery
5
6
4 2
Lamp
Battery
3
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 302
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
CLEANING
1. General
After use, the life jacket must be cleaned as soon as possible.
For the testing equipment required, refer to the “SPECIAL TOOLS, FIXTURES AND
EQUIPMENT MATERIALS” section.
Use cleaning solvents in well-ventilated premises.
Do not put seams or markings in contact with solvents.
Use clean, dry, non-fluffy cloths.
Use a source of compressed air free of oil and humidity and fitted with a 20 micron filter.
After cleaning, keep drying life jackets in a well-ventilated place before storing them.
2. Procedures
A. Textile components
(1). Use a solution of TEEPOL diluted in hot water to clean the life jacket.
(2). To remove spots of grease or paint, rub the affected parts with a cloth soaked in neat
TEEPOL.
Immediately after cleaning, remove all excess solvent using a cloth and leave to dry.
(1). These parts are cleaned and the dust removed from them using a cloth and
compressed air.
(2). For oil and grease stains, use a solution of TEEPOL and hot water.
Rinse with clean water and dry with compressed air.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 401
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 402
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
INSPECTION/CHECK
1. General
Checks must only be carried out by qualified operators (Authorities agreement).
It is the date of manufacture of the life jacket that must be used as the starting date for regular
checks.
(b). An overpressure test (refer to the "TESTING AND FAULT ISOLATION" section).
(c). An air tightness test (refer to the "TESTING AND FAULT ISOLATION" section).
AERAZUR recommends frequencies of:
Appl.A: 2 to 4 years with local agreement if over 2 years
Appl.B, C and D: 5 years
A. Examine the fabric parts (buoyancy chamber, belt, etc.). A bitter smell, too much shine or
hardening indicate that the fabric has deteriorated through ageing. Check that there is no
wear, soiling or distortion.
C. Porosity in the fabric of the buoyancy chamber will show up during the air tightness test
(refer to the "TESTING AND FAULT ISOLATION" section).
F. Check that there is no corrosion and that the mechanical parts operate correctly and freely
(inflator lever, insertion of the CO2 cylinder onto the inflator, threaded end of the CO2
cylinder).
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 501
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
G. Examine the mouthpiece, for cracks or any other form of deterioration. Check that the non-
return valve moves freely.
Partially inflate the buoyancy chamber and immerse the inflation tube in water to check for
leaks at the mouthpiece.
Dry the mouthpiece, taking care not to introduce water into the buoyancy chamber.
Change a defective mouthpiece.
(1). Check that the welded seal is in good condition (no chafing). If the cap shows
considerable bulging, scrap the CO2 cylinder and replace it with a new one. As the CO2
cylinders are sealed, it is not necessary to check their weight.
(2). However, if in doubt, weigh the CO2 cylinder and compare it with the minimum
permitted weight engraved on the body.
(1). Check that there are no cracks, impacts or swelling of the battery. Check that the
electrical connecting wire and the lamp are in good condition.
A distorted battery casing will indicate that the battery has been damaged by water or
humidity and is therefore unusable. Measure the thickness of the battery case: 12.06
mm maximum.
In both cases (lamp inoperative and casing too thick) scrap the system and replace it with a
new rescue light system.
After removing the inflator, direct a jet of compressed air through the valve base. The
valve core should open and the buoyancy chamber inflate.
Stop inflating when the buoyancy chamber has taken up its shape.
The valve core must close and provide a seal (no leaks). If this is not so, unscrew it and
replace it with a new valve core.
Operate in the same way, blowing the compressed air through the CO2 cylinder interface
(inflator lever operated). In the event of a leak, change the buoyancy chamber.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 502
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
K. After checking:
Appl.A
Replace the inflator with new seals and lock the inflator lever using linen thread.
Check the tightness of the cap of the valve core (0.2 to 0.3 daN.m).
Appl.B, C and D
Return the inflator lever to the normal position and fit a new safety clip together with
a new cylinder seal.
Replace the cylinder and tighten it firmly by hand (it must not unscrew using two
fingers).
M. Check that the strips of double-sided adhesive tapes are in good condition.
Change the strips if necessary.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 503
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 504
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
REPAIR
1. General
Generally speaking it is preferable to replace defective parts rather than to repair them;
However, according to circumstances, the following repairs can be carried out in
approved workshops;
If there is any doubt as to the local workshop's repair capability, it is recommended that
the life jacket is returned to the manufacturer ;
All repaired life jackets must be checked and tested before being put into service (refer to
the "CHECKING" section).
2. Scope of repairs
A. Buoyancy chamber
Repairs are limited to punctures and tears under 30 mm, located at least 30 mm from
seams.
The number of these repairs is limited to three per buoyancy chamber. The procedure is
described below.
B. Removable components:
The following components are repaired by replacing them:
carrying bag;
mouthpiece;
rescue light system;
CO2 cylinder;
inflator (Appl.A);
inflator sheath (Appl.A);
valve core (Appl.A);
whistle (C10 F).
C. Non-removable parts;
Scrap the life jacket if there are any faults in the following equipment:
Belt;
Inflator (Appl.B, C and D).
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 601
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
3. Repair
For the testing equipment required, refer to the "SPECIAL TOOLS, FIXTURES AND
EQUIPMENT MATERIALS" section.
(a). General
Do not introduce any solvent or adhesive into the interior of the buoyancy
chamber;
Change the solvent and the cloth when they are dirty;
Do not touch the surfaces after cleaning. The presence of any parasite material
risks causing poor bonding. For the same reasons, do not leave the cleaned
surfaces in the open air for more than a few minutes;
Avoid air currents that cause the condensation of atmospheric humidity onto
bonded areas (due to the accelerated evaporation of the solvents).
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 602
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
30 mm
Tear
30 mm
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 603
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 604
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Buoyancy chamber
Brush
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 605
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Buoyancy chamber
Repair patch
Cemented area
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 606
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Spatula
Fabric of the
buoyancy chamber
Repair patch
When the air bubbles have been removed, roll the assembled area evenly with
a roller.
Roller
Buoyancy chamber
Repair patch
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 607
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Talc
Buoyancy chamber
Repair patch
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 608
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
20 to 25mm
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 609
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
7
4
5 1
3 9
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 610
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
1. General
After checking the life jacket, carry out reassembly in the reverse order of disassembly.
Work on a clean work table covered with a protective material, free of any object likely to
damage the life jacket.
For the equipment and products required, refer to the “SPECIAL TOOLS, FIXTURES
AND EQUIPMENT MATERIALS” section.
2. Preparation
A. If necessary, install the life jacket’s various components and accessories as shown on
figure 701.
Refer to the "REPAIR" section for fitting and replacing components and accessories.
Check:
The fitting and tightness of the CO2 cylinder with its manifold gasket
(tightening torque: refer to the "FITS AND CLEARANCES " section);
The fitting of the mouthpiece;
The presence and adherence of the adhesive strips on the buoyancy chamber;
Appl.A:
The presence of new gaskets;
The tightness of the nut cap
(tightening torque : refer to the "FITS AND CLEARANCES" section);
The installation of the inflator sheath;
The locking of the inflator lever with break thread;
The dehydration capsule is installed;
The rescue light system is present.
Remove the pull tab plug before fitting.
Appl.B, C et D:
The presence of the rescue light system.
The inflator lever is locked with the safety clip; Remove pull-tab if necessary.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 701
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Appl.B, C and D
Mouthpiece
Whistle
Rubber band
Safety
clip
Cord
Double sided
adhesive tape
3 turns of black
adhesive tape Remove plug Detail 1
before folding (*)
R69 A665
“S+L” knot
Detail 2
Appl.B
BATTERY INSTALLATION
(Details 1, 2 and 3)
Rubber bands
(*) Appl.A only
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 702
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 703
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Completely deflate the life jacket using a vacuum pump or a vacuum cleaner.
Put the life jacket completely flat on a table.
Stow the belt into lengths of 10cm and hold the stowing loops in place with an elastic
band.
Figure 703
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 704
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
C. Folding procedure
1st fold
2nd fold
3rd fold
Figure 704
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 705
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Turn the jacket over and carry on folding as shown in Figure 705 below:
4th fold
5th fold
Figure 705
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 706
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
D. Packing
Figure 706
Figure 706
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 707
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Completely deflate the life jacket using a vacuum pump or a vacuum cleaner.
Put the life jacket completely flat on a table.
Stow the belt into lengths of 10cm and hold the stowing loops in place with an elastic
band.
Figure 707
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 708
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
B. Folding procedure
1st fold
2nd fold
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 709
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
3rd fold
4th fold
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 710
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Rotate the jacket 90° (Figure 709).
Figure 709
1st flap
2nd flap
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 711
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
Compact the jacket towards the centre by closing the 3rd and 4th flaps (Figure 710).
3rd flap
4th flap
Figure 710
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 712
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
C. Packing
Figure 711
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 713
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
6. Storage
All jackets should be stored in their carrying bag/pouch, in dry and well-ventilated
premises protected from rodents and ultra violet rays.
It is recommended to store them in an environment of 23°C 8°C and 50 % RH
(Relative Humidity).
During storage the life jackets must be handled carefully to avoid rubbing, cuts or other
damage to the flexible materials.
Avoid stacking the life jackets.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 714
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
A 1 – 080A
Valve core 0.026
2 – 080A
A 1 – 110A
Nut cap 0.2 to 0.3
2 – 110A
1 – 120A
0
2 – 120A CO2 cylinder 4 0.5 N.m
3 – 070A
25-65-09 REV 12
PAGE 801
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUAL
C10 LIFE JACKET
25-65-09 REV 12
PAGE 802
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUEL
C10 LIFE JACKET
SPECIAL TOOLS, FIXTURES
AND EQUIPMENT MATERIALS
25-65-09 REV 12
PAGE 901
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
COMPONENT MAINTENANCE MANUEL
C10 LIFE JACKET
2. Materials
2: TESTING 3: DISASSEMBLY 4: CLEANING
5: CHECK 6: REPAIR 7: ASSEMBLY/STORAGE
25-65-09 REV 12
PAGE 902
The document reference is online, please check the correspondence between the online documentation and the printed version.
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1001
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1002
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
INTRODUCTION INTRODUCTION
1. General 1. Généralités
The illustrated parts list (IPL) is intended to Le tableau de composition illustré (TCI) a pour
identify all the components of the unit. but d'identifier tous les composants de
l'équipement.
The illustrated parts list contains the following Le tableau de composition illustré comprend les
sections: sections suivantes :
Introduction, Introduction,
Detailed parts list, Nomenclature détaillée,
General alphanumeric index, Répertoire alphanumérique global,
Equipment designator index (if Répertoire des symboles circuits
applicable), (éventuel),
Table of optional components (if Table des optionnels (éventuel).
applicable).
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1003
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1004
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
3. Mise à jour
3. Updating
Lorsqu'un repère est modifié, ajouté ou
When an item is revised, added or deleted, the supprimé, il est porté, en regard dans la marge
letter "R" is shown in the RH margin (the droite, la lettre "R" (le numéro de révision
number of revision changes). change).
Le "R" apparaît dans la marge droite en regard
The letter "R" appears in the RH margin du numéro de page lorsque tous les repères
opposite the page number when all the item sont modifiés.
numbers are changed.
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1005
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1006
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
NOMENCLATURE DETAILLEE
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1007
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
130
140
141
Refer to Detail
on Fig.1 (2/2)
Voir Détail
150 sur Fig. 1 (2/2)
40
30
150
10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1008
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1009
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
120
80
70
60
50 110
100
30
120
70
141
140
90
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1010
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 13
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1011
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
130
160
180
140
141
Refer to Detail
on Fig.1 (2/2)
Voir Détail
170 sur Fig. 1 (2/2)
40
30
150
170
10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1012
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1013
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
120
80
70
60
50 110
100
30
120
70
141
140
90
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1014
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 13
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1015
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
20
30
Refer to Detail
Voir Détail
70
60
50
40
10
30
DETAIL
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1016
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1017
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1018
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
ALPHANUMERIC INDEX
REPERTOIRE ALPHANUMERIQUE
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1019
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
01700 1 100A AR
01700 2 100A AR
02014 1 - 170A AR
02014 2 - 200A AR
24796 1 150A AR
24796 2 170A AR
24796 3 040A AR
153804 1 120A 1
153804 2 120A 1
153804 3 070A 1
154137 2 160A 1
210225-2 2 - 001B REF
210224-0 1 - 001B REF
210225-1 2 - 001A REF
210225-0 1 - 001A REF
210226-1 2 - 020A NP
210226-0 1 - 020A NP
210228-0 3 - 001A REF
210236-1 1 010A 1
210239-0 1 040A 1
210239-0 2 040A 1
210240-0 1 141A 1
210240-0 2 141A 1
210240-0 3 030A 1
210353-0 1 - 180A 1 R
210353-0 2 - 210A 1 R
214851-0 1 140A 1
214851-0 2 140A 1
215922-0 3 010A 1
919023 2 180A
961042 1 070A 1
961042 2 070A 1
961042 3 060A 1
25-65-09 REV 13
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1020
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
961050 1 050A 1
961050 2 050A 1
961051 1 060A 1
961051 2 060A 1
962015 1 110A 1
962015 2 110A 1
962022 1 130A 1
962022 2 130A 1
962022 3 020A 1
962024 1 080A 1
962024 2 080A 1
962040 1 030A 1
962040 2 030A 1
962088 1 090A 1
962088 2 090A 1
962088 3 050A 1
999158 1 - 160A 1
999158 2 - 190A 1
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1021
AERAZUR
CMM – C10 LIFE JACKET
MEE - GILET DE SAUVETAGE C10
25-65-09 REV 12
The document reference is online, please check the correspondence between the online documentation and the printed version.
PAGE 1022