Denon Avr-1602 SM (ET)
Denon Avr-1602 SM (ET)
Denon Avr-1602 SM (ET)
, Canada, Europe,
Asia, China, Hong Kong &
Taiwan R.O.C. model
Hi-Fi Component
SERVICE MANUAL
MODEL AVR-1602/682
AV SURROUND RECEIVER
Some illustrations using in this service manual are slightly different from the actual set.
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
A B B
C D
F
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(5/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
- B LINE
46
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
A B B
C D
F
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(6/7)
1 2 3 4 5 6 7 8 9 10 11
+ B LINE G
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM WARNING: - B LINE
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Parts marked with this symbol have critical characteristics.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT Use ONLY replacement parts recommended by the manufacture.
CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR
CAUTION:
Before returning the unit to the customer, make sure you make either (1) a
NOTICE.
leakage current check or (2) a line to chassis resistance check. If the leakage
current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective. SCHEMATIC DIAGRAMS(6/7)
WARNING: FRONT P.W.B. UNIT H
DO NOT return the unit to the customer until the problem is located and TACT S/W P.W.B. UNIT
corrected.
H/P & POWER S/W P.W.B. UNIT
47
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
A B B
C D
F
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48
AVR-1602/682
SCHEMATIC DIAGRAMS(7/7)
1 2 3 4 5 6 7 8 9 10 11
G
+ B LINE
SIGNAL LINE
NOTICE WARNING:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics.
ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: SCHEMATIC DIAGRAMS(7/7)
CONDITION. Before returning the unit to the customer, make sure you make either (1) a
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR leakage current check or (2) a line to chassis resistance check. If the leakage TUNER P.W.B. UNIT H
NOTICE. current exceeds 0.5 milliamps, or if the resistance from chassis to either side
of the power card is less than 460kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is located and
corrected.
48